manual no. zz1996a artefacto para hacer bandas y cuellos … · 2018-03-30 · lista de partes, y...

Manual No. ZZ1996A

Automatic band AndCollar Maker

InstallationIntructions,Parts Lists

And Diagrams For

11996AAutomatic band And Collar

Maker

Last Updated 7-10-2003

Copyright© 1998-2003By

Atlanta AttachmentCompany

Incorporated

All Rights Reserved

Printed In The U.S.A.

Manual No. ZZ1996A

Artefacto para hacer bandas ycuellos automáticamente

Instrucciones deInstalación,

Lista De Partes,y Diagramas Para

11996AArtefacto para hacer bandas y

cuellos automáticamente

Derechos De Autor© 1998-2003Por

La CompañíaAtlanta Attachment

Incorporada.

Derechos Reservados

Impreso En Los EE.UU.

This equipment is protected by one or more of thefollowing patents:

US patents - 4,038,933; 4,280,421; 4,432,294; 4,466,367;4,644,883; 4,886,005; 5,134,947; 5,159,889; 5,203,270;5,307,750; 5,373,798; 5,437,238; 5,522,332; 5,524,563;5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202.

Foreign patents - 2,084,055; 2,076,379; 2,177,389;2,210,569; 4-504,742; 8-511,916; 9-520,472; 0,537,323;

92,905,522.6; 95,935,082.8; 96,936,922.2.

Other U.S. and Foreign Patents Pending.1998 Atlanta Attachment Company.

Este equipo es fabricado bajo una o más de laspatentes siguientes:

En E.U.- 4,038,933; 4,280,421; 4,432,294; 4,466,367;4,644,883; 4,886,005; 5,134,947; 5,159,889; 5,203,270;5,307,750; 5,373,798; 5,437,238; 5,522,332; 5,524,563;5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202.

En El extranjero - 2,084,055; 2,076,379; 2,177,389;2,210,569; 4-504,742; 8-511,916; 9-520,472; 0,537,323;

92,905,522.6; 95,935,082.8; 96,936,922.2

Otras patentes pendientes en los EE.UU. y el exterior.Atlanta Attachment Company 1998

11996A ATLANTA ATTACHMENT COMPANY 1-3401 Industrial Park Dr.-Lawrenceville GA. 30045

(770)963-7369 FAX (770)963-7641 11996A

Table of ContentsAuto Collar and Band with Dual Roll Set-up Model 11996A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4

GENERAL IMFORMATION- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4OPERATIONAL DATA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4OPERATION OF UNIT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4

Modelo 11996A Máquina para hacer bandas y cuellos - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4INFORMACIÓN GENERAL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4DATA DE OPERACIÓN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4OPERACION DE la UNIDAD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4STARTING PROCEDURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-5PROCEDIMIENTO PARA EMPEZAR - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-5TROUBLE SHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6SOLUCIONES A PROBLEMAS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6

Cajas de Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-9Control Boxes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-9Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1211996AXXX Auto Collar & Band - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-13• Part List Directions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-11996GA Console, Generic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-31996-01B Table, Stand & Motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-53800P-002 Foot Switch Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-61996-16 Roll Mount Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-71996-11A Fold Band Sub-Assembly- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-91996-17 Band Stop Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-101996-18 Flow Control Panel Sub-Assembly- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-111996-19 Take-Up Stripper Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-120411-1300 Waste Container Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-131996-03A Pneumatic/Elec Box Assy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15AAE1996-14 14 Solenoid Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-161996-04A Control Box Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-171996-05 Top Conveyor Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-191996-07 Front Conveyor Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-211996-06 Conveyor Mount Kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-231996-08A Feed & Cut Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-251996-10A Transfer Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-271918-126 Cutter Carrier Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-281996-09A Cutter Sub-Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-291996-21 Double Puller Yoke Assy- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-311996-12 Stacker Door Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-331996-15 Indexing Table For 1996Y23 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-341996-20B Thread Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-35• Pneumatic And Wiring Diagrams - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-371996-PD1 Pneumatic Diagram- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-381996-PD2 Pneumatic Diagram- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-391996-WD2 Wiring Diagram, Panasonic Motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-401996-WD3 Wiring Diagram, Efka AB180 DC Motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-411996-WD4 Wiring Diagram, Pansonic D7 Motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-42• Sewing Head Details - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-431996A-02J95 Sewing Head Detail Juki MO3904 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-441996A-02 Sewing Head & Details For Yamato 8003- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-451975-400M Cutter Assembly- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-461975-400S6 Cutter Comp Kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-471975-400Y Cutter & Footlift Pneumatics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-48

1-4 ATLANTA ATTACHMENT COMPANY 11996A401 Industrial Park Dr.-Lawrenceville GA. 30045

11996A (770)963-7369 FAX (770)963-7641

Auto Collar and Band withDual Roll Set-upModel 11996A

1. GENERAL IMFORMATION

A. The auto collar and band maker willautomatically measure two strips of fabric,fold them in half, cut and align the ends,transfer them to the sewing station, sew theends, trim the chain and stack the bands on abundle table.

B. The stacker bundle table will index thebundles when a preset piece count is completeand stop the machine when a preset number ofbundles have been completed.

C. The machine will stop when a thread breaks orthe fabric runs out.

2. OPERATIONAL DATACAPACITY: WIDTH = Minimum 2" TO 8.0"(singleroll) or 4"(dual roll). Band length = 15" TO 52" ( 7 1/2"TO 26" FOLDED)

SEAMER: YAMATO 8003H 3 THREAD(504 STITCH)

CYCLE TIME (Approx): 17" STRIP = .066 MIN. ,30" STRIP = .086 MIN.

ALIGNMENT TOLERANCES:SIDE = +-1/16", ENDS = +-1/16"

LENGTH TOLERANCES:LENGTH REPEATABILITY = +-1/8" ( Rib Knit)LENGTH IS ADJUSTABLE TO THE NEAREST1/10"

3. OPERATION OF UNIT

A. CONTROL BOXES: The unit has threecontrol boxes which control all machinefunctions.

1. Stacker Counter Box : This box contains thecounters for the piece count per bundle and thenumber of bundles completed. To set thecounter, press and hold the button marked “I”.As you hold this button down, press the buttonunder each digit you want to change. When youhave entered the desired numbers, Release the“I” button and press the “R” button to set thecounter to the new quantity. The machine willnot operate if the #Bundles counter is at “0".

2. Conveyor Speed Box : This box controls thespeed of the conveyor for sewing and jogging tostack. The thumbwheels should be set to matchthe sewing speed of the seamer. If the seamerstitch length is changed, the conveyor speedmust be adjusted also. Different fabrics willvary slightly in the speed they feed through theseamer. The operator may need to make small

Modelo 11996AMáquina para hacer bandas y

cuellos1. INFORMACIÓN GENERAL

A. La máquina automática de hacer bandas ycuellos mide atomáticamente una pieza de tela,la dobla, empata los extremos, corta la pieza,la transfiere a la costura, cose el extremo,recorta y apila la parte.

B. El apilador clasifica los bultos al completaruna cantidad fija, y para cuando un número debultos predeterminado se completa. Uncontador programable está localizado en lacaja de control principal.

C. La máquina parará cuando un hilo se rompe ola tela se termina.

2. DATA DE OPERACIÓNCAPACIDAD: ANCHO= Mínimo 2" A 8.0" (Un rollo)o 4" (Doble Rollo). Largo de la Banda = 15" A 52"(7 1/2" A 26" DOBLADA)

CERRADORA: YAMATO 8003H 3 HILOS(PUNTADA 504)

TIEMPO del CICLO: (aprox.) Tira de 17" =. 066 MIN ,Tira de 30"=. 086 MIN

TOLERANCIAS de ALINEAMIENTO:LADO=+ - 1/16" , EXTREMOS=+ - 1/16"

TOLERANCIAS de LARGO:REPETICION del LARGO=+ - 1/8" (Tricote decordoncillo) el LARGO ES ajustable al 1/10" máscercano.

3. OPERACION DE la UNIDAD

A. CAJAS de CONTROL: La unidad tiene trescajas de control.

1. Caja Contadora: Esta caja tiene los contadores depiezas por bulto y el número de bultoscompletos. Para fijar el contador, mantengahundido el botón “I”. Con el botón hundido,presione el botón debajo del número que quierecambiar. Cuando ha entrado los númerosdeseados, suelte el botón “I” y presione el botón“R” para fijar la nueva cantidad. La máquina nofunciona si el # del contador de bultos está en“0".

2. Caja De La Velocidad Del Transportador: Estacaja controla la velocidad del transportador paracoser y moverse para apilar. Los selectores debeser fijados para igualar la velocidad de costura dela Cerradora. Si la velocidad o el largo de lapuntada cambian, el transportador debe ajustarse.Tejidos diferentes pasán a diferente velocidadpor la Cerradora. El operario puede necesitar


(770)963-7369 FAX (770)963-7641 11996A

changes in the conveyor speed to keep theseamer sewing the end of the band square.Presser foot pressure effects the feed speed also.Adjust pressure foot pressure to the medium/light range.

3. Main Control Box: This box controls all otherfunctions of the unit. It has a resetable piececounter. An “Auto/Manual/Reset” toggle switchwhich controls the operation mode of themachine. All of the functions printed above thepushbuttons are accessible when the switch is inthe “AUTO” position. If the switch is in“MANUAL” position, all of the functionsprinted below the pushbuttons are accessible.Another toggle switch selects “1 Roll’ or ‘2Roll” mode. The thumbwheels adjust the bandlength, end alignment, trailing edge chain cutlength, and stacker door timing.

4. STARTING PROCEDURE

A. Load the roll(s) of fabric on the roll holder(s)and align the roll(s) with the guides.

B. Set the “Auto / Manual / Reset” toggle switch(1) to “Auto”. Set the “1 Roll / 2 Roll” switchas needed. Lay the end of the fabric over thetake-up rollers, place your hand on the rollersand rotate the rolls to feed the fabric betweenthe rollers, or press “FEED BAND” (6) on thecontrol box. Feed about 24" of fabric throughthe take-up rollers .

C. Feed the bands through the guides and up tothe feed roller. Press “Feed Band” on thecontrol box until the band extends beyond theband cutter. Adjust the guides to a close fit tothe band width.

D. Press “Feed Band” to feed several inches offabric and allow the guides to align the edgesof the band.

E. Cut the band by pressing “Cut Band”(8) on thecontrol box. Dispose of the cut ends.

F. Set the desired numbers into the bundlecounters and press “R” (15) on the counters toreset then to the new number.

G. Press “Start” (5) on the main control box.

H. Inspect the first band as it is transferred afterbeing cut, but before it is sewn. If the ends donot align properly adjust the flow control (??)at the right of the fold and cut assemblyaccording to the instructions printed there. Itmay also be necessary to adjust thumbwheel#4 to get the ends to align properly.

hacer pequeños cambios en la velocidad deltransportador para que la Cerradora cosacuadrada el final de la banda. La presión delprensatelas también afecta la velocidad dealimento. Ajuste la presión del prensatelas amedio/ ligero.

3. Caja Principal De Controles: Ésta caja controlatodas las otras funciones de la unidad. Tiene uncontador de piezas programable. Un interruptorde CAMBIO (Auto/ Manual) que controla lamodalidad de operación de la máquina. Todas lasfunciones impresas arriba de los botones sonaccesibles cuando el interruptor está en “Auto”.Si el interruptor esta en “Manual”, todas lasfunciones debajo de los botones están accesibles.Otro botón selecciona “1 rollo” o “2 rollos” . Losselectores gradúan el largo, alineamiento final, ellargo de la cadeneta del borde trasero y el tiempode la puerta del apilador.

4. PROCEDIMIENTO PARA EMPEZAR

A. Cargue el rollo(s) de tela en la montura yalinie el rollo(s) con las guías.

B. Ponga el interruptor de cambio (1) en“AUTO”. Escoja “1 Rollo” / “2 Rollos”.Coloque el extremo de la tela sobre los rodillosdel tirador, con la mano gire los rodillos haciaatrás para alimentar la tela entre los rodillos, opresione “FEED BAND” (6) en la caja decontrol. Alimente cerca de 24" de tela a travésde los rodillos.

C. Alimente las bandas a través de las guías hastael rodillo alimentador. Presione “Feed Band”en la caja hasta que la tela es extiende más alláde la coratdora de tela. Ajuste las guías alancho de la banda.

D. Presione “Feed Band” para alimentar variaspulgadas de tela y permitir a las guías alinearlos bordes de la Banda.

E. Corte la Banda hundiendo “Cut Band”(8) en lacaja de control. Tire el extremo cortado.

F. Fije los números deseados en el contador debultos y presione “R” (15) en los contadorepara configurar el nuevo número.

G. Presione “Comenzar” (5) en la caja principal.

H. Inspeccione la primera al ser transferidadespués de cortada pero antes de se cosida. Silos extremos no alinean ajuste el control deflujo a la dercha de;l ensanblado de doblar ycortar siguiedo las intrucciones impresas allí.También puede ser necesario ajustar el selector#4 para alinear los extremos correctamente.


11996A (770)963-7369 FAX (770)963-7641

I. Inspect the band after it has been sewn. If theend of the band is not sewn straight accross,adjust the conveyor speed on the “ConveyorSpeed” box by changing the thumbwheels(10).If the seam slopes to the rear of the band (A),increase the speed the conveyor. If the seamslopes to the front of the band (B), slow downthe conveyor. Adjust the band stop so that theband makes contact with the stop at the end ofthe transfer stroke. This helps keep the bandstraight in the conveyor.

J. Measure the band length and adjust the firstthree thumbwheels (9) as needed to get thecorrect length. Changing thumbwheel #3 onedigit should change the length of the bandabout 1/10".

5. TROUBLE SHOOTING

A. Machine will not start when “Start” button ispressed:

1. Check that the band loop detector eyes arecovered. In “1 Roll” mode at least one loop eyemust be covered. In “2 roll” mode both eyesmust be covered for the machine to start.

2. The “#Bundles” counter must not be on “0".Reset if necessary.

3. Check the “Auto/Manual/Reset” switch is in“Auto”.

I. Inspecione la banda después de ser cosida. Sila banda no es cosida recta perpendicular a labanda, ajuste la velocidad del transportador enla caja “Velocidad del Transportador”cambiando el Selector (10). Si la costura seinclina para la parte posterior de la banda (A),aumente la velocidad del transportador. Si lacostura se inclina al frente de la banda (B),disminuya la velocidad. Ajuste la parada de labanda así que la banda haga contacto con conla parada al final del golpe de cambio. Estoayuda a mantener la banda derecha en eltransportador.

J. Mida la banda y ajuste los primeros 3Selectores (9) para conseguir el largo deseado.Al cambiar el Selector #3 un número el largode la banda debe cambiar en 1/10".

5. SOLUCIONES A PROBLEMAS

A. La máquina no comienza cuando presiona“Comenzar”:

1. Chequee que los sensores detectores de la bandaestán cubiertos. En “1 Rollo” por lo menos unode los sensores debe estar cubierto. E “2 Rollos”ambos ojos deben estar cubiertos para que lamáquina comience.

2. El contador “# de bultos” no puede estar en “0".Reconfigure si es necsario.

3. Verifique que la máquina está en “Auto”.

Sewn Band / Banda Cosida


(770)963-7369 FAX (770)963-7641 11996A

B. Machine stops with band held in clamp:Indicates a “Jam” at the seamer.

1. The band did not clear the seamer eye in 3seconds. Check seamer and clear.

2. Check the sew eye for proper operation.

3. Check that needle guard is not up and coveringthe eye.

C. Machine stops, cut band falls from clamp:Indicates a thread break.

1. Check for broken thread. Repair thread and resetthe machine by moving the“Auto/Manual/Reset” switch from “Auto” to“Manual” and back.

2. Check threading of thread stand and sensors.Sensors must have some tension on the thread tofunction properly.

D. Band seam is irregular in shape:1. Band ends uneven: Adjust flow control on Feed

& Cut Assembly. (Pg. 2-25)

2. Adjust thumbwheel #4 to align ends evenly.

E. Seam angles to rear of band:1. Increase the conveyor speed by adjusting the

thumbwheels (10) on the conveyor speed box.

2. Reduce the stitch length. This problem mayoccur when changing to lighter or limber fabricsthat feed faster through the sewing head.

3. Changing the presser foot pressure can alsoeffect this.

F. Seam angles to front of band:1. Decrease conveyor speed by adjusting the

thumbwheels(10).

2. Increase the stitch length.

3. Check band stop setting. Stop blade should beset to contact the band at the end of the transferstroke.This helps keep the band straight in the conveyorduring transfer.

G. Seam angle varies:1. The transfer band motion is too fast, causing the

band to slip crooked as the front conveyorlowers. Slow the transfer down if necessary.

2. Check the timing of the transfer and frontconveyor to insure that the front conveyor isdown and holding the band before the transferclamp releases it.

3. The band stop may be set too far to the leftallowing the band to slip at the end of thetransfer stroke.

B. La máquina para con la banda aprisionada enel sujetador. : Indica “Atascado” en laCerradora.

1. La banda no salió de la cerradora en 3 segundos.Chequee la cerradora y desatasque.

2. Chequee el sensor de la costura.

3. Chequee que el Guarda Aguja no está arribacubriendo el sensor.

C. La máquina para, la banda cortada cae delsujetador: Indica rotura de hilo.

1. Busque el hilo roto,. Enhebre y recomience lamáquina moviendo el interruptor de “Auto” a“Manual” y de vuelta a “Auto”.

2. Chequee el enhebrado de los hilos en lossoportes y los sensores. Los hilos en los sensoresdeben tener algo de tensión para que funcionencorrectamente.

D. Costura de forma irregular.1. Extremos desiguales: Ajuste el control de flujo

en Ensamblado de alimento y Corte. (Pg. 2-25)

2. Ajuste el selector #4 para alinear los extremos.

E. La costura hace ángulo hacia atrás de la banda.1. Aumente la velocidad del transportador Selector

(10) en la caja de la velocidad del transportador.

2. Reduzca el largo de la puntada. Este problemapuede ocurrir cuando cambia a tejido más livianoo flexible que son alimentados más rapidamente.

3. Cambiar el prensatelas también puede afectaresto.

F. La costura hace ángulo hacia el frente1. Diminuya la velocidad del transportador Selector

(10).

2. Aumente el tamaño de la puntada.

3. Verifique la graduación de la parada de la banda.La hoja de parada debe tocar la banda al final delgolpe de cambio. Esto ayuda a mantener labanda derecha en el transportador durante elcambio.

G. El ángulo de costura varía:1. El movimiento de tranferencia de la banda es

muy rápido, haciendo que la banda se deslicecuando el transportador del frente baja.Disminuya la velocidad del transfer.

2. Chequee el tiempo del transfer y el transportadordel frente para asegurar que el transportador estáabajo aprisionando la banda antes que el transferla suelta.

3. La parada de la banda puede estar colocadademasiado a la izquierda permitiendo que labanda se deslice al final del cambio.


11996A (770)963-7369 FAX (770)963-7641

H. Transfer, Cut or Stacker is slow or erratic:

1. The air cylinders may be dry. The air should beshut off and a small amount of light machine oilplaced in the fitting on each end of the cylinders.Do not use too much oil.

2. Check the air supply pressure while the machineis running and ensure that you maintain at least60 psi during operation.

I. Stacker bottoms in down stroke:1. Stacker door “on” time is too long for the flow

control settings. Reduce the value ofthumbwheel #6 (9) or readjust the flow controlsuntil the stacker door operates smoothly withoutbottoming out.

J. Stacker makes poor stack:1. Stacker door is too fast or too slow. A fast

stacker will cause the band to slide forward andwrinkle. A slow stacker will not have enoughspeed to flip the top of the band over and it willhang on the stacker door. A stacker adjustedproperly will flip the end of the band over flatwith little wrinkle.

K. Band cutter fails to cut band completely

1. Band is wrinkling under cutter. The band foldclamp is misadjusted. Adjust flow control sothat the bands lie flat as the cutter is activated.

2. Check rolling knife blade for burrs.

3. Check spring pressure on knife assembly.

L. Chain cutter fails to cut chain.1. Check adjustment of chop eye. Adjust chop eye

for leading edge cut.Note: Leading edge cut is also the cut betweenthe bands in “2 Roll” mode.

2. Adjust thumbwheel #5 for trailing edge cut.

3. Check knife for mechanical problems or dullblades.

M. Bands do not position properly in front of thestacker door prior to stacking.

1. Conveyor “Jog” speed not set properly. The jogspeed of the conveyor determines the positioningof the bands in front of the stacker door. Adjustthe speed “potenciometer” inside the conveyorspeed control box to align the bands with thestacker door.

H. Transfer, Cortador o Apilador lentos oerráticos:

1. Los cilindros pueden estar secos. Apague el airey ponga una pequeña cantidad de aceite demáquina de coser en cada extremo del cilindro.No use demasiado aceite

2. Asegurese que la presión del aire de mantiene apor lo menos 60 PSI mientras esté operando lamáquina.

I. El apilador toca fondo en el golpe hacia abajo:1. El tiempo de la puerta del apilador muy largo

para la graduación de los controles de flujo.Reduzca el el Selector #6 (9) o reajuste loscontroles del flujo hasta que la puerta funcionasuavemente sin que llegue al fondo.

J. Mal apilado:1. El Apilador va muy rápido o muy lento. Un

apilador rápido hace que la banda resbale haciaadelante y se arrugue. Un apilador lento no tienesuficiente velocidad para lanzar la parte de arribade la banda y se cuelga en la puerta del apilador.Un apilador ajustado lanza la banda plana concon pocas arrugas.

K. El cortador de la banda no la cortacompletamente.

1. La banda se arruga en el cortador. El sujetadordel doblador de la banda está desajustado. Ajusteel control de flujo para que la banda esté planacuando el cortador es activado.

2. Chequee la rodaja cuchilla por asperezas.

3. Chequee la presión del resorte en la cortadora.

L. El corta cadeneta no corta la cadena.1. Chequee el ajuste del sensor de la cortadora.

Ajuste el corte del borde delantero.Nota: El corte delantero es también el corte entrebandas si son “2 Rollos”.

2. Ajuste el corte del borde trasero, selector #5.

3. Chequee la cortador por fallas mecánica ocuchillas sin filo.

M. Las bandas no se colocan correctamente enfrente del apilador antes de apilar.

1. La velocidad de “Prueba” del transportador no escorrecta. La vel. de prueba del transportadordetermina la posición de las bandas en frente dela puerta del apilador. Ajuste el potenciometro dela velocidad dentro de la caja de control deltransportador para alinear las bandas con lapuerta del apilador.


(770)963-7369 FAX (770)963-7641 11996A

Cajas de Control

Caja Principal de Control

Panel del frente , funciones: Automático.(1) Interruptor Auto / Manual / Recomenzar: En“auto” la máquina opera en modo normal automático.Controla la función de los otros botones en el panel delfrente. El texto sobre cada botón denota la operaciónque se puede hacer cuando el interruptor (1) está en“Auto”.También recomienza el programay todas lasfunciones de la máquina cuandocambia de “Auto” a“Manual” y otra vez a “Auto”.

(5) Comenzar: Comienza el ciclo automático decostura.

(7) Prueba.Transp.: Prueba el funcionamiento deltransportador. (El botón de “Prueba” en la caja delmotor no funciona.) Descontinua el ciclo automático sila máquina está funcinando.

(6) Alimento de Banda: Opera ambos rodillos paraalimentar la tela. Asegúrese que el rodillo de alimentode la banda floja va a más velocidad que el rodillo de lacortadora.

(8) Cortar la Banda: Opera ambos, el cortador de labanda y el cortacadeneta.

Control Boxes

Main Control Box

Front Panel Switch Functions: Auto Mode.(1) Auto/Manual/Reset toggle switch: Set to “Auto”for normal automatic operation of the machine.Controls the function of the other push buttons on thefront panel. The text above each push button indicatesthe operation that that switch performs in “Auto” mode.The switch also resets the program and all machinefunctions whenever it is changed from “Auto” to“Manual” or from “Manual” to “Auto”.

(5) Start: Starts the automatic sewing cycle.

(7) Cycle Stop/Conv.Jog: Operates the side conveyormotor to test its operation (the “Jog” button on thestepper box is disabled). Will stop the automatic cycleif the machine is running.

(6) Feed Band: Operates both sets of feed rollers tofeed fabric. Be sure the loop feed roller is set to runfaster than the band feed roller at the cutter.

(8) Cut Band: Operates both the band cutter to trim thefabric and the chain cutter to cut the chain.


11996A (770)963-7369 FAX (770)963-7641

Front Panel Switch Functions: Manual Mode.When the Auto/Manual switch (1) is in the “Manual”position, the function indicated below each push button canbe tested. Automatic band making is disabled.

(5) Clamp/Fold: Activates the band Clamp and Foldhardware for adjustment and test.

(7) Clamp/Transfer: Operates the transfer clamp andtransfer cylinder to test operation and adjust speeds.

(6) Air Jets: Turns on the band fold air jet so it can beadjusted.

(8) Stack: Cycles the stacker for adjustment of flowcontrols and thumbwheel #6.

Other Front Panel Switch Functions:(4) 1 Roll / 2 Roll Switch: In “UP” position themachine will process a single roll of material fromeither roll position. In the “Down” position the machinemust run two rolls of fabric at the same time. When oneroll runs out, switch to “1 Roll” and finish theremaining roll.

(2)Piece Counter Reset:Resets the piece count (3) tozero.

(9) Thumbwheel switches: Main Control Box

TW#1: Indicates band cut length in 10" increments(3=30")

TW#2: Indicates band cut length in 1" increments(4=4")

TW#3: Indicates band cut length in 1/10" increments(5=5/10")

Setting for 34.5" band length = 345. The actual bandlength will vary depending on the fabric. Adjust asneeded to get precise band length.

TW#4: Indicates length of band that is fed into thejaws of the band fold clamp in 1/10" increments.(6=6/10") This setting controls the alignment ofthe edges of the cut band after it is folded.Increasing this number will make the top plylonger.

TW#5: Adjusts the length of the cut chain on thetrailing edge of the sewn band.

TW#6: This is the “on” time setting for the stackercylinder. This time is adjusted to match thestacker cylinder speed adjustment (flowcontrols) so that the air cylinder does not bottomout on the down stroke.

Modo ManualCuando el interruptor (1) está en “manual”, la funciónindicada debajo de cada botón puede ser probadaindependientemente. El Automático no funciona.

(5)Sujetador / Doblador: Active el sujetador y eldoblador para ajustes y prueba.

(7) Prensa / Translado: Opera elsujetador y el cilindrode translado para probar la operación y ajustarvelocidades.

(6) Chorros de Aire: enciende el chorro de aire en eldoblador de labanda para ajustarlo.

(8) Apilador: Mueve el apilador para ajustes delcontrol de flujo y del selector #6.

Otras Funciones(4) 1 Rollo / 2 Rollos: En posición “Arriba” la máquinaprocesa un rollo de material de cualquier lado. En laposición “Abajo” la máquina solo funciona con 2 rollosal mismo tiempo. Cuando un rollo se acaba, cambie a 1rollo y termine el resto del otro rollo.

(2) Recomienza el Contador: Recomienza el contador(3) a cero.

(9) Selectores: Caja Principal de Controles

SEL# 1: Indica el corte de la banda en longitudes de10" (3= 30")

SEL# 2: Indica largo de corte en incrementos de 1"(4= 4")

SEL# 3: Indica largo de corte en incrementos de1/10" (5= 5/10")

Graduación para banda de 34.5" de largo = 345. Ellargo de la banda varía con diferentes telas. Ajuste paraconseguir el largo preciso de la banda.

SEL# 4: Indica el largo de la banda que esalimentado en las quijadas del sujetador deldoblador en 1/10". (6=6/10") Esta graduacióncontrola el alineamiento de los bordes de labanda cortada después de doblada. Aumentar el# hace que el doblez de arriba sea más largo.

SEL #5: Ajusta el largo de la cadeneta en el bordetrasero de la banda cosida.

SEL # 6: Es el tiempo “encendido”del cilindro delapilador. Este tiempo se ajusta para que seaigual al ajuste de la velocidad del cilindro delapilador (control de flujo) de forma que elcilindro no llegue al final de su carrera en suviaje hacia abajo.


(770)963-7369 FAX (770)963-7641 11996A

Conveyor Speed Box(10) Thumbwheels: Set to match the conveyor sewingspeed to the speed of the sewing head. This number isdetermined by the seamer stitch length and the fabricfeeding characteristics. This value may need to beadjusted depending on stitch length, fabric, feed dogheight, and presser foot pressure.

(11) Jog Button: This button is disabled, use “Conv.Jog” button (7) on the main control box to operate theconveyor motor.

Stacker Counter Box(12) Quantity/Bundle: Sets the number of pieces thatwill be stacked in each bundle. The indexer activateswhen this count has counted down to “0" and thecounter resets itself back to the preset number.

(17) #Bundles: Sets the number of bundles to bestacked before the machine stops. The machine stopswhen this counter counts down to “0". This countermust be reset before the machine will run again.

To change the quantity on either counter press and holdthe “I” button (12 or 14) while pressing the buttons under

each digit in the display until the desired count isdisplayed. Release “I” and press the “R” button (13 or 15)

to bring up the new count on he display. The counterscount down to zero.

Caja de la Velocidad del Transportador(10) Selectores: Para fijar la velocidad de costura deltransportador a la velocidad del cabezal. Este númeroes determinado por el largo de la puntada de lacerradora y las características de alimento de la tela.Este valor puede cambiar dependiendo en largo de lapuntada, la tela, la graduación de los dientes de arrastrey el prensatelas.

(11) Botón De Prueba: Este botón no funciona, elbotón (7) en la caja de control principal se usa paraprobar la velocidad del transportador.

Contador(12) Cuenta/ Bulto: Indica las piezas que tendrán encada bulto. El separador de Bulto se activa cuando estácuenta llega a “0" y se devuelve al número prefijado.

(17) # de Bultos: Número de los bultos a hacer antesque la máquina para. La máquina para cuando estecontador llega a “0". Este contador debereprogramarse antes que la máquina vuelva afuncionar.

Para cambiar la cantidad en el culaquier contadorpresione el botón “I” (12 o 14). Con el botón “I” hundido

presione los botones debajo de la ventanilla hastaconseguir la cuenta deseada. Suelte “I” y presione el

botón “R” (13 o 15) para mostrar la nueva cuenta en lapantalla. Los contadores contarán regresivamente hasta

cero.


11996A (770)963-7369 FAX (770)963-7641

Configuration

The 11996A Auto Band and Collar Maker comes with a band or collar maker and a staker.

The Atlanta Attachment’s Units Numbers are formed in the following manner.

11996AY23

Machine Class Code NumberAAC Unit Code Number

Sewing Machine Codes

J95 JUKI MO3904Y23 YAMATO AZ8003H


(770)963-7369 FAX (770)963-7641 11996A

11996AXXX Auto Collar & BandPart No. Description Qty Pg. Part No. Description Qty Pg.

1 1996GA Auto Collar & Band Unit 1 2-32 1996A-02J95 Sewing Head & Detail 1 2-44

For 11996AJ951996A-02 Sewing Head & Detail 1 2-45

For 11996AY23

3 1996-20B Thread Assembly 1 2-354 1996-PANA Cable PackagePanasonic 1 �1AAC Drawing Number = 191516C Rev. 1


11996A (770)963-7369 FAX (770)963-7641

Notes


(770)963-7369 FAX (770)963-7641 11996A

Part List Directions

The following pages contain the appropriateassembly drawings for this unit.

Las páginas siguientes contienen los dibujosde los ensambles que hacen parte de esta unidad.

Below is a brief description of the Atlanta Attachment parts list and how to use it.Debajo hay una descripción de la lista de partes de Atlanta Attachment y como usarla.

Part No. Description Qty. Pg.1 010-047 Belt Idler Assembly 1 2-30

A further break down of the item in question canbe found on the page listed

Manifiesta sub-división del artículo en cuestión enésta página.

This is the quantity of this part no. that wasoriginally used in the assembly process.A “0" denotes an optional item.

Muestra la cantidad de ésta parte.Un “0" denota que es una parte opcional.

A brief description of the part to aid inidentifying it on the drawing. When orderingspare parts be sure to use the part no. as this ishow AAC stocks parts.

Breve descripción de la parte para mejoridentificación en el dibujo. Cuando ordenerepuestos utilice el número de la parte.

The Atlanta Attachment Company part number.Be sure to reference this number when orderingspares.

Este es el número de la parte de la CompañíaAtlanta Attachment. Siempre utilice éste númerocuando ordene repuestos.

Refers to the number in the bubble on thedrawing. A number including a decimal denotes apart of a sub-assembly. Example 26.1 is part ofsub-assembly 26.A hexagonal bubble denotes connecting parts.

Se refiere al número de la parte en el dibujo.Un número que incluye decimales quiere decir quees parte de un sub-ensamblado. Por ejemplo 26.1hace parte del ensamblado número 26.Losnúmeros en exágonos denotan partes que seconectan.


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996GA Console, GenericPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 1996-01B Table, Stand & Motor 1 2-52 1996-03A Pneu/Elec Box Assy 1 2-153 1996-04A Control Box Assy 1 2-174 1996-05 Top Conveyor Assy 1 2-195 1996-06 Conveyor Mt Kit 1 2-236 1996-08A Feed & Cut Assy 1 2-257 1996-12 Stacker Door Assy 1 2-338 1996-13A Cable Package 1 �19 1996-15 Indexing Table 1 2-3410 1996-LABEL Label Package 111 SSFP01048 Scr,Fl Ph 1/4-20x3/4 312 SSPS95128 Scr,Pn Sl 10-24x2 113 WWFS10 Washer 3

14 SSZS93032 Scr,Sh Me 10-16x1/2 515 SSHC01160 Scr,Hx Cp 1/4-20x2-1/2 316 WWL1/4 Lock Washer 317 WWFS1/4 Washer 318 1996-PD1 Pneumatic Diagram 1 2-3819 1996-WD2 Wiring Diagram 1 2-4020 1996-WD3 Wiring Diagram 1 2-4121 1996-WD4 Wiring Diagram 1 2-4222 SSTS98040 Scr, Tr Sl 10-32x5/8 223 NNK10-32 Kep Nut 224 1996-038 Crincle Cloth Plate 225 1996-PD2 Pneumatic Diagram AR 2-39AAC Drawing Number 191515C Rev. 3


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-01B Table, Stand & MotorPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AAQME-4-4 Quick male Elbow 22 AA198-5106 Filter, Air Micro Lg 13 AAQBU-5-5 Union, Bulkhead 24 SSPS70048 Scr,Pn hd Sl 4-40x3/4 45 1996-105 Eye Mount, Frame 26 1975-412A Nut Plate 27 MM132-1202 Cap, Sq End Blk 28 MM503022LB Caster, Rubber 49 SSZP#12064 Scr,Pn Sh Me #12x1 310 MMC2103025 Latch, Adj Lever 411 NNH1/2-13 Hex Nut 412 NNH5/16-18 Hex Nut 313 SSHC01048 Scr,Hx Cp 1/4-20x3/4 1014 SSHC10080 Scr,Hx Cp 5/16-18x1-1/4 315 SSZS93032 Scr,Sh Me 10-16x1/2 sd 1816 SSZH#10128 Scr,Sh Me #10x2 617 WWF5/16 Flat Washer 618 WWL5/1 Lock Washer 319 3800P-002 Foot Pedal Assy 1 2-620 MM9308K15 Grommet Strip 1.5’21 1996-011 Top, Stacker Tbl 122 WWL1/4 Lock Washer 1023 1996-013 Door, Right Side 124 1996-014 Panel, Left at Stkr 125 1996-015 Door, Right Rear 126 1996-016 Door, Front 1

27 �1 Plate, Conveyor 128 1996-018 Brkt, Air Regulator 129 1996-019 Frame Weldment,Console 130 1996-11A Fold Band Sub-Assy 1 2-931 1996-16 Roll Mount Sub-Assy 1 2-732 26127 Leg 433 265072 Support, Sewing Head 434 23140A Elec Eye 035 1996-17 Band Stop Sub-Assy 1 2-1036 1996-18 Flow Control Bank 1 2-1137 1996-19 Take-Up Strp Sub-Assy 1 2-1238 4059-D7-NS Panasonic Motor 0

4059-AB180 Efka DC Motor 039 0411-1300 Waste Container Assy 1 2-1340 ZX3832 V Belt 141 SSSC01032 Scr,So Cp 1/4-20x1/2 242 WWFS1/4 SAE Flat Washer 1243 NNK1/4-20 Kep Nut 244 23113 Door 145 1996-0110 Cover, F & C Assy 146 1996-0111 Cover, Rear F & C 147 AAFBP-11C Bracket, Rotate 148 NNH1/4-20 Hex Nut 249 WWF10 Flat Washer 3AAC Drawing Number 191695C Rev. 2


11996A (770)963-7369 FAX (770)963-7641

3800P-002 Foot Switch AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 MM6970T64 3/4" Abrasive Tape 3’2 3844P-119B Label, Foot-Lift 03 NNK6-32 Kep Nut 14 SSFC80016 Scr,Fl Al 6-32x1/4 45 1278-5051 Plate, Foot Pedal 16 1278-6161 Foot Pedal Modification 2

7 3844P-119A Label, Start-Sew 08 3800P-C02 Cable, General 19 AAF3/8 Plastic Clamp 110 SSFC80024 Scr,Fl Al 6-32x3/8 111 TT1818 Female Quick Slide 4AAC Drawing Number = 190638C Rev. 7


(770)963-7369 FAX (770)963-7641 11996A

1996-16 Roll Mount Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SSSC98112 Scr,Soc Cp 10-32x1 3/4 22 SSHC10032 Scr,Hx Cp 5/16-18x1/2 13 WWFS10 Washer, Flat 24 1278-6587 Rod, Emer Stop 15 4012-04-12 14’Rod For 12" 16 265160A Base, Emer Off Sw 17 28201 Cross Block 28 781-1-1224 Ball Bearing Disc 49 NNK10-32 10-32 Kep Nut 2

10 1996-0818 Straight Rod 111 4012-03 Tension Rod Holder 212 23196 Straight Rod 313 8732-0896 1/2x14 Rod 114 A-U Rod Connector 215 SSSS98032 Scr, So Set 10-32x1/2 216 1996-161 Point On End Rod 2AAC Drawing Number 191383C Rev. 4


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-11A Fold Band Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AAC7DP-3 Cyl, Air 3/4 12 AAC8DP-2 Cyl, Air 1/2 13 AAFBP-8C Brkt, Pivot 24 BBAW-3Z Bearing, Rod End 25 BBAW-4 Rod End, Precision 16 MM132-1202 Cap, Sq End Blk 27 MM2X897 Block, Pillow 28 NNH5/16-24 Hex Nut 49 NNH6-32 Hex Nut 210 NNK1/4-20 Kep Nut 411 NNK10-32 Kep Nut 712 NNK5/16-18 Kep Nut 113 NNK6-32 Kep Nut 414 SSFC80024 Scr,Fl Al 6-32x3/8 415 SSHC01032 Scr,Hx Cp 1/4-20x1/2 216 SSHC01064 Scr,Hx Cp 1/4-20x1 117 SSHC01160 Scr,Hx Cp 1/4-20x2-1/2 218 SSHC10112 Scr,Hx Cp 5/16-18x1-3/4 419 SSHC98048 Scr,Hx Cp 10-32x3/4 120 SSPS80016 Scr,Pn Hd sl 6-32x1/4 221 SSPS80024 Scr,Pn Hd Sl 6-32x3/8 422 SSPP98032 Scr,But Cp 10-32x1/2 423 SSSC01048 Scr,So Cp 1/4-20x3/4 424 SSSC10064 Scr,So Cp 5/16-18x1 125 SSSC80024 Scr,So Cp 6-32x3/8 226 SSSC98048 Scr,So Cp 10-32x3/4 627 SSSC98096 Scr,So Cp 10-32x1-1/2 128 SSSC98112 Scr,So Cp 10-32x1-3/4 229 SSSC98160 Scr,So Cp 10-32x2-1/2 230 SSZS93032 Scr,Sh Me 10-16x1/2sd 431 WWF1/4 Flat Washer 1132 WWFS10 SAE Flat Washer 17

33 WWF5/16 Flat Washer 934 WWFS6 SAE Flat Washer 835 WWL10 Lock Washer 436 1278-6310 Cyl Mount, Puller 137 1278-7055A Prox Sw W/Plug 238 AAC8DP-.5 Cyl, Air, Da 139 1996-111 Weldmt, Fold Assy 140 1996-1110 Bearing Blk, Band 141 1996-1111 Bearing Supp, Band 142 1996-1112 Brkt, Cyl Mt 143 1996-124 Plate, Band Hold 144 1996-1114 Shaft 145 1996-1115 Brkt, prox Sw 146 1996-1116 Cover, FIH Assy 147 1996-112 Lever, Cyl Rod 148 1996-113 Weldmt, Fold assy 149 1996-114 Weldmt, Upper Fold 150 1196-115 Angle, Fold Jaw Assy 151 1996-116 Hinge, Folder Assy 152 1196-117 Brkt, Cyl Rod Pivot 253 1996-118 Jaw, Bottom Folder 154 1996-119 Jaw, Upper Folder 155 NNJ5/16-18 Jam Nut 156 AAQME-5-8 Quick Male Elbow 257 AAQME-5-10 Quick male Elbow 458 CCCL3F 3/16 Clamp Collar 159 1996-125 Pressure Tabs 260 SSPS90024 Scr,Pn Hd Sl 8-32x3/8 461 WWL8 Lock Washer 462 WWF8 Flat Washer 463 NNH8-32 Hex Nut 4AAC Drawing Number 191696C Rev. 0


11996A (770)963-7369 FAX (770)963-7641

1996-17 Band Stop Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 1996-171 Block, Slide, B S 12 1196-172 Plate, Base B s 13 1996-173 Mount, B S Adjuster 24 1996-174 Stop, Band Twist 15 1996-175 Rod, Threaded 16 1996-176 Rod, D2 27 SSSS80016 Scr,So St 6-32x1/4 28 SSFC80024 Scr,sl al 6-32x3/8 4

9 SSFC98016 Scr,Fl Al 10-32x1/4 210 SSSC98024 Scr,so Cp 10-32x3/8 211 WWF10 Washer, Flat 212 WWL10 Washer, Lock 213 NNH10-24 Hex Nut 314 TTCL1BPPK1 Knob 1AAC Drawing Number = 191423C Rev. 3


(770)963-7369 FAX (770)963-7641 11996A

1996-18 Flow Control Panel Sub-AssemblyPart No. Description Qty Pg. Part No. Description Qty. Pg.

1 1996-181 Mount, F C Bank 12 1996-182 Cover, F C Bank 13 1996-183 Clamp, F C Bank 14 FF67F4079 Stand-Off 25 SSPS80016 Scr,Pn Hd sl 6-32x1/4 46 SSPS80064 Scr,Pn Hd Sl 6-32x1 3

7 WWFS6 Washer, Flat SAE 48 AA2000F-03 Flow Control, Air 189 SSZS93032 Scr,Sh Me 10-16x1/2 sd 510 1996-184 Flow Control Label 1AAC Drawing Number 191424C Rev. 5


11996A (770)963-7369 FAX (770)963-7641

1996-19 Take-Up Stripper Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 1996-191 Brkt, Stripper Take-Up 12 1996-192 Clamp, Stripper Take-UP 13 1996-193 Stripper, Take-Up 14 SSSC80024 Scr,So Cp 6-32x3/8 25 SSZS93032 Scr,Sh Me 10-16x1/2 sd 2

6 WWFS6 Washer, Flat 27 WWL6 Washer, Lock 28 WWF10 Washer, Flat 2AAC Drawing Number 191425C Rev. 0


(770)963-7369 FAX (770)963-7641 11996A

0411-1300 Waste Container AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 MMTC32GTAN Container, Waste 12 MM5415K16 Hose Clamp 23 MM16300 Tube Clamp 14 MMRPL150 Plain Elbow 15 MMTC32GLN 1 1/2 Conduit Lock Nut 16 MMTC32GR Reducer 18 26282 Filter Holder 2

9 26285A Filter, Waste System 110 SSPS90024 Scr,Pn Hd Sl 8-32x3/8 411 MMFH150 Flex Hose 6’12 SSHC01032 Scr,Hx Cp 1/4-20x1/2 113 WWF1/4 Washer, Flat 114 NNK8-32 Nut 4AAC Drawing Number = 191225C Rev. 7


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-03A Pneumatic/Elec Box AssyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AA198-7 Binary Counter 12 AA3000F-07 In-Line Flow Cont 2 �13 AAVF51FM1B Air-Elec Sw 2 �14 AAE1996-14 14 Sta Valve Set 1 2-165 1996-WD2 Wiring Diagram AR 2-406 EE540201B1 Mtr Speed Cntrl 0 �27 FFSC15606 Cover Strn Relief 18 EEDC1LG Wire Duct 1" 3’9 EEDC2X2 Wire Duct Cover 1.5’10 EEDE2X2 Wire Duct 2x2 1.5’11 EEDF1X2 Wire Duct 1x2 3’12 1996-039 Wago Terminal Mount 213 FF264-311 Trmblk Wago Sngl 614 FF264-341 Trmblk Wago Dual 7015 FF264-371 Trmblk Wago End 1016 FF89F957 Relay Solid State 117 FFSPC56 Standoff 418 SSZS93032 Scr,Sh Me 10-16x1/2 9 �119 1996-031 Pneu Elec Box 120 SSPP80016 Scr,Pn Hd Ph 6-32x1/4 821 4030 Transformer 122 1996-034 Guard Elec Pan 1

23 1996-035 Brkt Speed Cntrl 124 1996-PD1 Pneumatic Schematic AR 2-3825 3800P-C17 Cable Eye Ext 2 �126 WWFS6 SAE Flat Washer 427 AAQUT-4-4 Quick Union Tee 228 FF156F2006 Female conn 129 FF156F1803 Female Conn 130 FFSC15603 Strn Relief Cover 131 NNK6-32 kep Nut 432 FFNFS40 Pwr Sup, Switching 133 SSPT90032 Scr,Pn Hd Ph 8-32x1/2 2334 WWF8 Flat Washer 2335 1996-040 Wago Terminal Mount 136 SSPPT80048 Scr,Pn Hd Ph 6-32x3/4 237 SSPS80144 Scr,Pn Sl 6-32x2-1/4 238 SSPS98064 Scr,Pn Hd Sl 6-32x1 239 AAV125B Pilot Valve 140 FRRK44T-4 Cable W/Plug 141 1996-WD3 Wiring Diagram 1 2-4142 1996-WD4 Wiring Diagram 1 2-42AAC Drawing Number 191708C Rev. 3


11996A (770)963-7369 FAX (770)963-7641

AAE1996-14 14 Solenoid AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 KQR07-09 Reducing Fitting 22 SY3140-5L0Z Solenoid 103 SY3000-53-1A Left End Cap 14 SY3000-52-1A Right End Cap 15 SY3000-51-15A Sup/Exh Block 2

6 SX3000-50-1A-N7 Block Assy 47 SX3000-50-1A-N3 Block Assy 248 VZ1000-11-1-4 Din Rail 9.75"9 AN203-KM8 Silencer, Exh Port 2AAC Drawing Number 191020A Rev. 0


(770)963-7369 FAX (770)963-7641 11996A

1996-04A Control Box AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SSPP90032 Scr,Pn Hd Ph 8-32x1/2 82 SSPS70048 Scr,Pn Hd Sl 4-40x3/4 23 WWSI8 Int Tooth Washer 84 011-116 Stand Ctrl Box 15 1278-6002 Stop Button Assy 16 1278-6587 Rod Emerg Stop 17 1278-7170 Bend Rod 18 1971-102 Straight Rod 19 1996-14 Counter Assy 110 23140A Electric Eye 0

11 265155A Holder Eye 112 28201 Cross Block, Lg 213 4060-06PA prog Mach Cntrl 114 265157 Base Stand 115 AP-28-800P Control Box 116 SSPP80032 Scr,Pn Hd Ph 6-32x1/2 417 WWSI6 Int Tooth Washer 4AAC Drawing Number 191709C Rev. 0


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-05 Top Conveyor AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 MM8407A138 “E” ring, 22 PP24XLB37M Gear Pulley 13 SSAS016048 Scr,so Sh 1/4x3/4 44 SSAS020016 Scr,Al sh 5/61x1/4 25 SSSC01024 Scr,So Cp 1/4-20x3/8 16 �16 1996-051 Brkt, Bearing Left 17 1996-052 Brkt, Bearing Right 18 1996-053 Spacer 49 1996-054 Rolle 110 1996-055 Shaft, Drv 0.5x4.0 111 1996-056 Slide Plate, conv 212 1996-057 Belt, Urethane 113 1996-07 Front Conveyor 1 2-2114 26006 Belt Guard 115 26017 Mount, Step Motor 1

16 AP-22E-103 Step Motor 117 PP12XL037 Gear, Pulley 118 SSHC01048 Scr,Hx Cp 1/4-20x3/4 219 WWL1/4 1/4 Lock Washer 220 SSSC98048 Scr,So Cp 10-32x3/4 2 �121 NNK10-32 10-32 Kep Nuts 222 GG120XL037 Belt, Gear 123 AA2000F-03 Flow Control 124 SSPS80016 Scr,Pn Hd Sl 6-32x1/4 425 BBIL005 Ball Bearing 226 SSC98032 Scr,So Cp 10-32x1/2 227 WWFS1/4 SAE Flat Washer 228 RRLC026E1 Spring 4AAC Drawing Number = 191372C Rev. 4


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-07 Front Conveyor Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AAC8DP-1 Cylinder, Air 12 AAFBP-8C Pivot Bracket 13 AAFCT-8 Humphrey Clevis 14 BCD1-2 Hard Steel Wash 15 BBTRA411 Thrust Washer 16 BBTT602 Bearing, Bronze 17 GGD250XL37 Gear Belt, 125T 18 MM98335A04 Cotter key 19 NNK10-32 10-32 Kep Nut 410 NNH10-32 10-32 Hex Nut 211 1996-071 Mnt Plt, Ft Conv 112 1996-072 Guide, Belt 113 1996-073 Tube, Cnv Mnted 114 1996-074 Pulley, Pivot Belt 115 1996-075 Spacer, Fnt Conv 116 1996-076 Shfat, Frt Cnv Piv 117 1996-077 Lock Pin 118 NNH8-32 8-32 Hex Nut 419 CCCL3F Collar, Set, 3/16" Clamp 120 26169 Idler, Tension 121 26179 Bushing, Idl Pulley 2

22 26180 Bracket, Cylinder 123 26181 Adapter Plate 224 26183 Pulley, 18T 125 265060 Lft Frt Plate, Top 126 265061 Fr Frt Plate 127 265064 Support Bearing 128 AAQME-5-10 Quick Male Elbow 329 SSPS90032 Scr,Pn Hd sl 8-32x1/2 230 SSSC90032 Scr,so Cp 8-32x1/2 331 SSSC98032 Scr,So Cp 10-32x1/2 232 SSSC98048 Scr,So Cp 10-32x3/4 233 WWL10 10 Lock Washer 234 WWFS10 10 SAE Fl Washer 635 SSSC90048 Scr,So Cp 8-32x3/4 636 SSPS98080 Scr,Pn Hd Sl 10-32x1 1/4 237 SSSC90080 Scr,So Cp 8-32x1 1/4 138 AAF3/16 Airline Clamp 239 SSSC98040 Scr,So Cp 10-32x5/8 140 WWF8 No. 8 Washer 2AAC Drawing Number = 191374C Rev. 4


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-06 Conveyor Mount KitPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AAQME-5-8 Quick Male Elbow 12 AAC7D-1 Air Cylinder 13 TTCL1BPPK1 Torque Knob 54 11200 Bumper 15 265018 Lift Cyl Brkt 16 265019 Lift Cyl Mount 17 1996-063 Conv Mnt Plate 18 SSHC01056 Scr,Hx cp 1/4-20x7/8 49 WWSE1/4 Star Washer 210 WWL1/4 Washer, Lock 811 SSHC01040 Scr,Hx Cp 1-20x5/8 212 NNH1/4-20 Nut, Hex 313 1996-061 Plate, Conv Adjuster 114 SSFS01048 Scr,Fl Sl 1/4-20x3/4 215 SSFC10056 Scr,Fl Cp 5/16-18x7/8 416 NNH/16-18 Nut, Hex 417 WWFS5/16 Washer, Flat SAE 418 RRLC045G5 Spring 2

19 23056 Support, Weldment 219.1SSSS01012 Scr,So St 1/4-20x3/16 220 1996-066 Shaft, Hex 121 SSFC95176F Scr,fl Cp 10-24x2 3/4 222 NNE5/16-18 Elastic Nut 223 NNH10-24 Nut, Hex 424 1996-062 Plate, Conv Swg Out 125 1196-064 Adjuster, Conv Swg Out 126 SSHC01032 Scr,Hx Cp 1/4-20x1/2 127 WWFS10 Washer, Flat 428 MM2X897 Pillow Block 229 WWFS1/4 Washer, Flat SA 1130 NNJ1/4-28 Nut, Jam 131 SSSC20128 Scr,So Cp 5/16-24x2 132 WWF5/16 Washer, Flat 133 WWFE020 Washer, Lg Fender 1AAC Drawing Number = 191373C Rev. 6


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-08A Feed & Cut AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 CCCL8F Clamp Collar 32 EE54020181 Motor with Gear Hd 13 SSSC95064 Scr,So Cp 10-24x1 24 GG100XL037 Gear Belt 25 RRLC029C10 Spring 26 1535E-079 Pulley, Gear 22T 17 1917-20 Bot Roller, Urethane 28 1917-21 Shaft, Bottom Roller 29 1918-086 Mat, Cutting 110 1996-081 Plate, F & C Assy 111 1996-0810 Shaft, Top Roller 112 1996-0811 Roller, Top Fd Assy 113 1996-0812 Mount, Band pull Mtr 114 1996-0813 Pulley, Gear 24T 115 1996-0814 Support, F & C Assy 316 1996-082 Mount, Top Roller 217 1996-083 Brkt, Step Mtr Mt 118 �1 Plate, F & C Assy 119 1996-085 Shield, Cloth Stripper 120 1996-086 Mount, Fabric Guide 421 1996-087 Mount, Fab Edge Guide 222 1996-088 Fabric Guide, Right 123 1996-089 Fabric Guide, Left 124 1996-09A Cutter Sub-Assy 1 2-2925 1996-10A Transfer Sub-Assy 1 2-2726 265185 Adj Knob 327 WWL1/4 Lock Washer 828 WWFS1/4 SAE Flat Washer 1129 NNH1/4-20 Hex Nut 930 3517 Bronze Bearing, Thru 631 SSSC01224 Scr,So Cp 1/4-20x3-1/2 332 1917-22 Mount, Bottom Roll 433 1996-0815 Spacer, Mat Guide 3

34 8732-0736 Rod, CRS 235 AP-22E-103 Step Motor 136 TTC1BPPK1 Knob, Plastic Blk 237 PP12XL037 Pulley, Gear 12T 138 SSPS90024 Scr,Pn hd Sl 8-32x3/8 839 SSSC80032 Scr,So Cp 6-32x1/2 240 WWFS6 SAE Flat Washer 241 SSSS98024 Scr,So St 10-32x3/8 442 SSSC98056 Scr,So Cp 10-32x7/8 843 WWFS10 SAE Flat Washer 2844 SSSS20048 Scr,So St 5/16-24x3/4 245 SSSC98040 Scr,So Cp 10-32x5/8 1646 WWL10 Lock Washer 2047 SSFC98048 Scr,Fl al Cp 10-32x3/4 1048 1995-017 Motor Pulley 149 SSHC01040 Scr,Hx Cp 1/4-20x5/8 550 SSSC01064 Scr,So Cp 1/4-20x1 851 SSPS90096 Scr,Pn Hd sl 8-32x1-1/2 352 Nnh8-32 Hex Nut 353 NNW8-32 Wing Nut 354 AA2000F-03 Flow Control 155 Nnk10-32 Kep Nut 456 NNJ5/16-24 Jam Nut 457 SSPS80064 Scr,Pn Hd Sl 6-32x1 258 NNH10-32 Hex Nut 459 1996-122 Upper Center Brkt 160 1996-123 Lower Center Brkt 161 1996-089A Left Center Guide 162 1996-088A Right Center Guide 163 1996-108 Uncurl Tube 164 1996-21 Double Puller 1 2-31AAC Drawing Number 191513C Rev. 2


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-10A Transfer Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 265160A Base 12 AACMGQ2075 Cyl,Air Dual Rod 13 SP25-10-B Cylinder, Rodless 14 AA198RA408 Flow Control 25 AAQME-5-8 Quick Male Elbow 26 NNH10-32 10-32 Hex Nut 87 SSPS70048 Scr,Pn Hd Sl 4-40x3/4 48 SSSC98144 Scr,So Cp 10-32x2 1/4 49 SSHC10064 Scr,Hx Cp 5/16-18x1 110 WWFS10 10 SAE Flat Washer 1211 WWL10 Lock Washer 1212 SSSC01048 Scr,So Cp 1/4-20x3/4 413 SSCM5X16 Scr,so Cp 5mmx16mm 1514 MM93085K15 Grom Strip, Rub .9’15 AAF3/16 Black Clamp 416 0411-3123 Mounting Block 217 SSSC98040 Scr,So Cp 10-32x5/8 818 1996-101A Beam, Transfer 1

19 1996-102A Plate, Transfer 120 350-5913 1/2" Rod 121 1996-104 Pad, Transfer 122 SSSC98016 Scr,So Cp 10-32x1/4 223 SSSC98032 Scr, So Cp 10-32x1/2 224 23140A Electric Eye 025 265155A Holder, Eye 326 1918-126 Cutter Carrier 1 2-2827 1918-034 Guide Bar Cutter 128 1918-070 Guide Bar Cutter Shaft 129 1996-107 Uncurler Blow Tube 130 SSSC70016 Scr,So Cp 4-40x1/4 231 A-U Rod Connector 132 1996-103A Rod, 1/2" 90° x 2 133 1996-091A Mount Bracket 234 1996-093 Gde. Follow. Cut 1AAC Drawing Number = 191514C Rev. 3


11996A (770)963-7369 FAX (770)963-7641

1918-126 Cutter Carrier AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 1699 Cutting Wheel 12 1918-087 Pressure Adj. Block 13 1918-088 Stud 14 1918-089 Cutter Block 14.1 SSSS98016 Scr, So Set 10-32x1/4 15 1918-090 Cutting Wheel Shaft 16 1918-091 Slide Block 17 1918-112 Bearing Adj Cam 18 3535 Spring 19 BB1602DS Ball bearing 310 BBSUPER-6 Super-6 Ball Bushing 2

11 MM3100-25 Retaining Ring 112 SSAS016016 Scr, Al Sh 1/4x1/4x10-24 213 SSPS80016 Scr, Pn Hd Sl 6-32x1/4 414 SSSS42040C Scr, So Set 5/8-18 115 SSSC98024 Scr, So Cp 10-32x3/8 116 SSSC90048 Scr, So Cp 8-32x3/4 117 WWFE012 3/16 Fender Wsher 118 WWL10 Lock Washer 119 SSSC98064 Scr, So Cp 10-32x1 2AAC Drawing Number = 191616C Rev. 4


(770)963-7369 FAX (770)963-7641 11996A

1996-09A Cutter Sub-AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SP25-10-B Cyl, rodless 10" 12 AA198RA408 Flow Control 23 SSSC5MX16 Scr,So Cp 5mm16mm L 84 1996-095 Left Bracket 15 1996-094A Gde Plate Cut 1

6 SSSC01040 Scr,So Cp 1/4-20x5/8 47 1996-096 Right Bracket 18 WWFS1/4 SAE Flat Washer 49 WWL10 10 Lock Washer 8AAC Drawing Number = 191506C Rev. 2


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-21 Double Puller Yoke AssyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SSSC20064 Scr SoCp 5/16-24x1 22 BBTT710-01 Bearing, Bronze, Thrust 43 3514A5 Roller, Upper Drive 24 3513-300 Shaft, Flatted,60case,3/8 25 3511AZ096M Yoke Roller 26 WWFF1/2 Felt Washer, Flat 27 SSFS90016 Scr, Fl Sl 8-32x1/4 48 IID016X128 Dowel Pin,1/4 x 2" 29 350199 Bracket, Alignment 210 350198 Plate, Alignment 2

11 SSTS85012 Scr, Trs Hd Sl 6-40x3/16 412 AAQME-5-8 Quick Male El 413 AACFSD091 Cylinder,air 214 1996-2101 Brkt, Infeed Rollers 115 WWF8 Washer, Flat,8 416 WWL8 Washer, Lock,8 417 SSSC90032 Scr, So Cp 8-32x1/2 218 CCCL8F Collar, Clamp,1/2" 2AAC Drawing Number = 191754C Rev. 0


11996A (770)963-7369 FAX (770)963-7641


(770)963-7369 FAX (770)963-7641 11996A

1996-12 Stacker Door AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 BBAW-5Z Rod End Bearing 12 MM100-1/8 Door Trim-Blk 5’3 MM2X897 Block, Pillow 24 AAQUT-4-4 Quick Union T 15 AAQPR-5-4 Reducer 16 NNH5/16-18 Nut, Hex 17 NNE5/16-18 Elastic Nut8 SSHC10112 Scr,Hx Cp 5/16-18x1 3/4 19 WWFS5/16 Washer, Flat SAE 1110 WWF5/16 Washer, Flat SAE 811 WWL5/16 Washer, Lock 412 SSSC98048 Scr,so Cp 10-32x3/4 613 WWL10 Lock Washer 1014 23105 Rod, Straight 115 23112A6 Hinge 3

16 23634 Damper Cyl 117 AAQME-4-8 Quick Male Elbow 218 23112A1 Screen 119 1996-121 Lever 120 23112A3 Stiffener 121 23112A4 Mount 122 23112A5 Support 123 SSSC98024 Scr,So cp 10-32x3/8 424 SSPP98024 Scr,Pn Hd Ph 10-32x3/8 825 WWB1/4 Bonded Washer 1826 AA3000F-07 Flow Control 227 NNJ5/16-24 Jam Nut 128 273-4-503 1/4 Leather Washer 1AAC Drawing Number 191379C Rev. 5


11996A (770)963-7369 FAX (770)963-7641

1996-15 Indexing Table For 1996Y23Part No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AA198RA508 Flow Control 22 AAC6DP-18 Air cylinder 13 SSPS98064 Scr,Pn Sl 10-32x1 24 AAFFD-167 Pivot Bracket 15 WWF10 No. 10 Washer 26 SSZH#10032 Scr,Hx Sh Me No.10x1/2 117 311-127 Edge Guide 28 MM2235 1-1/4 Strap 19 AATP5/32 5/32 Airline 8’10 FF23F4309 N. O. Switch 111 NNJ5/16-24 5/16-24 Jam Nut 212 SSFC98032 Scr,Flt All Cp 10-32x1/2 213 SSHC01048 Scr,Hx Cp 1/4-20x3/4 1214 SSSC98032 Scr,So Cp 10-32x1/2 215 WWFS1/4 1/4 Washer 24

16 WWL1/4 1/4 Lock Washer 817 1996-154 Pneumatic Diagram 118 SSBK01096 Bo,Car 1/4-20x1 1/2 1219 1996-151 Table Top 120 1996-153 Slide Tongue 121 025-028 Guide Block 122 025-029 Material Pusher 123 025-030 Material Stop 124 1904-13 Button Valve Brkt 125 26196 Cyl Mount Brkt 126 1996-152 Leg Mount 427 26238 Leg Assembly 428 NNK1/4-20 Nut, Kep 1229 WWFS10 SAE Flat Washer 1AAC Drawing Number 191364C Rev. 3


(770)963-7369 FAX (770)963-7641 11996A

1996-20B Thread AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 0411-069C Bracket, Thread Break 12 0411-070 Clamp, Sensor Brkt 13 4003-IS3WT2 Sensor 34 WWF10 Flat Washer 2

5 SSPS98040 Scr,Pn Hd Sl 10-32x5/8 26 4003-MA3/FE Cable, 8 FT 17 4003-ISINST Instructions, Thrd Sensor ARAAC Drawing Number 191047B Rev. 4


11996A (770)963-7369 FAX (770)963-7641

Notes


(770)963-7369 FAX (770)963-7641 11996A

Pneumatic And Wiring Diagrams


11996A (770)963-7369 FAX (770)963-7641

1996-PD1 Pneumatic Diagram


(770)963-7369 FAX (770)963-7641 11996A

1996-PD2 Pneumatic Diagram


11996A (770)963-7369 FAX (770)963-7641

1996-WD2 Wiring Diagram, Panasonic Motor


(770)963-7369 FAX (770)963-7641 11996A

1996-WD3 Wiring Diagram, Efka AB180 DC Motor


11996A (770)963-7369 FAX (770)963-7641

1996-WD4 Wiring Diagram, Pansonic D7 Motor


(770)963-7369 FAX (770)963-7641 11996A

Sewing Head Details


11996A (770)963-7369 FAX (770)963-7641

1996A-02J95 Sewing Head DetailJuki MO3904

Part o. Description Qty. Pg. Part o. Description Qty. Pg.1 MM16314B1 Funnel 12 26276E Label 13 311-128 Tape Mounting 14 SSSC01064 Scr, So Cp 1/4-20x1 45 ZX3835 V Belt 16 23427 Pulley 07 1975-400M Cutter Assembly 1 2-46

8 1975-400Y Cutter and FootliftComp. 1 2-489 23275 Isolator Mount 410 4059-PM63 Motor Pulley 111 311-129 Tape Mounting 112 1996-126 Chain Scrap Chute 113 SJUKI-3904 Juki sewing Head 1AAC Drawing Number = 191531C Rev. 6


(770)963-7369 FAX (770)963-7641 11996A

1996A-02Y52 Sewing Head & Details For Yamato 8003GPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SYAM-8003G Sewing Head, Yamato 12 1975-400S10 Cutter & Footlift Parts 13 AAV#TBV400 Chain & Waste Vac. 14 MM16314C1 Funnel 15 1278-6364 Tape Mounting 16 1996-017 Plate, Conv. Skid 17 1996-084 Plate, F & C Assy 18 4059-PM63 Pulley, 63MM Efka 1

9 ZX3832 V Belt 110 1996-126 Chain Scrap Chute 111 1975-400MG Cutter Assy 112 26276E Label 113 2107511 Foot, Tractor 114 1996-130 Spring, Tractor Foot 115 2107511A Adaptor 1AAC Drawing Number 192349C Rev. 0


11996A (770)963-7369 FAX (770)963-7641

1975-400MG Cutter AssemblyPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 1976-100 Upper Cutter Assy 12 RRLC024C14 Spring 13 1976-002 Retainer 14 1976-024 Lower Cutter 15 SSSC70016 Scr,Soc Cap 4-40x.25 2

6 1975-432 Cutter Body 17 1975-407 Clevis 1NOTE: 1976-024 Lower Cutter has 2 sharpened sides. i.e. itmay be rotated 1 time.AAC Drawing Number = 190330C Rev.8


(770)963-7369 FAX (770)963-7641 11996A

1975-400S6 Cutter Comp KitPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 SSSC85024 Scr,So Cp 6-40x3/8 32 AAQME-5-10 Quick Male Elbow 23 WWFF1/4A Felt Washer 14 CCCL3F Collar, 3/16 15 CCSC33/16 3/16 Set Collar 16 MM92390A15 Clevis Pin 17 MM98335A04 Cotter Key 18 NNH10-32 Hex Nut 29 1976-048 Stud, Cyl Mount 110 1975-443 Mount, Cutter Cyl 111 SSCM6X10 Scr,Ch Hd M6x10mm 212 SSPSM4X20M Sc,Pn Hd Sl M4x0.7x20mm 2

13 SSSC98024 Scr,so cp 10-32x3/8 114 WWF1/4 Flat Washer 215 WWF10 Flat Washer 216 WWFS6 SAE Washer 217 WWSI6 Int Lock Washer 218 1975-441 Mount, Cutter Body 119 1975-213A Air Cylinder 120 1975-408 Drive Link 121 1975-440 Spacer, Mount 1AAC Drawing Number 191029A Rev. 0


11996A (770)963-7369 FAX (770)963-7641

1975-400Y Cutter & Footlift PneumaticsPart No. Description Qty. Pg. Part No. Description Qty. Pg.

1 AAC7DP-1 Cylinder, air 12 AAQME-5-10 Quick male elbow 23 AAQME-5-8 Quick male elbow 14 CCCL3F Collar, 3/16 15 CCSC33/16 Set Collar, 3/16 16 MM92390A15 Clevis Pin 17 MM98335A04 Cotter Pin 18 NNH1/4-28 Nut, Hex, 1/4-28 19 NNH10-32 Nut, Hex, 10-32 210 NNJ5/8-18 Nut, Jam, 5/8-18 111 SSM7151210 Scr, 15/64-28 x 7/16 212 SSTS85016 Scr, Pan, 6-40 x 1/4 2

13 SSSC85024 Scr, Socket, 6-40 x 3/8 214 WWF1/4 Washer, Flat, 1/4 215 WWF10 Washer, Flat, #10 216 11200 Bumper 117 1975-213A Cylinder, Air, Modified 118 1975-408 Link, Drive 119 1975-445 Guard, Material 120 1975-451 Spacer, Cutter Body 121 1975-452 Mount, Comb Cylinder 122 1976-048 Stud, Cylinder Mount 123 WWFF1/4A Felt Washer 1AAC Drawing Number = 190256A Rev. 4


(770)963-7369 FAX (770)963-7641 11996A

Notes

Atlanta Attachment Co. (AAC)Statement of Warranty

Manufactured ProductsAtlanta Attachment Company warrants manufactured products to be free from defects in material and workmanship fora period of eight hundred (800) hours of operation or one hundred (100) days which ever comes first. AtlantaAttachment Company warrants all electrical components of the Serial Bus System to be free from defects in material orworkmanship for a period of thirty six (36) months.

Terms and Conditions:AAC Limited Warranty becomes effective on the date of shipment.

AAC Warranty claims may be made by telephone, letter, fax or e-mail. All verbal claims must be confirmed in writing.

AAC reserves the right to require the return of all claimed defective parts with a completed warranty claim form.

AAC will, at its option, repair or replace the defective machine and parts upon return to AAC.

AAC reserves the right to make the final decision on all warranty coverage questions.

AAC warranty periods as stated are for eight hundred (800) hours or one hundred (100) days which ever comes first.

AAC guarantees satisfactory operation of the machines on the basis of generally accepted industry standards, contingentupon proper application, installation and maintenance.

AAC Limited Warranty may not be changed or modified and is not subject to any other warranty expressed or impliedby any other agent, dealer, or distributor unless approved in writing by AAC in advance of any claim being filed.

What Is CoveredElectrical components that are not included within the Serial Bus System that fail due to defects in material orworkmanship, which are manufactured by AAC are covered for a period of eight hundred (800) hours.

Mechanical parts or components that fail due to defects in material or workmanship, which are manufactured by AAC.

Purchased items (sewing heads, motors, etc.) will be covered by the manufacturer’s (OEM) warranty.

AAC will assist in the procurement and handling of the manufacturer’s (OEM) claim.

What Is Not CoveredParts that fail due to improper usage, lack of proper maintenance, lubrication and/or modification.

Damages caused by; improper freight handling, accidents, fire and issues resulting from unauthorized service and/orpersonnel, improper electrical, plumbing connections.

Normal wear of machine and parts such as Conveyor belts, “O” rings, gauge parts, cutters, needles, etc.

Machine adjustments related to sewing applications and/or general machine operation.

Charges for field service.

Loss of time, potential revenue, and/or profits.

Personal injury and/or property damage resulting from the operation of this equipment.

manual no. zz1996a artefacto para hacer bandas y cuellos … · 2018-03-30 · lista de partes, y...

Documents