a l i e n p r o . c o m . m x

MV-200O P E R A T I N G M A N U A L

1w w w . a l i e n p r o . c o m . m x

Wireless Microphone Handheld Wireless Microphone Specifications

Simple truble shooting

Foreword

Features

6 w w w . a l i e n p r o . c o m . m x

Thank you for purchasing our wireless microphone.Please read this instruction carefully before you operate the product.Please keep this instruction after reading as a reference for the future. This professional series wireless microphone system uses low consumption discharging technique with a super sensitive VHF high band frequency receiver and controlled with 15ppm crystal, a put on and put off to hit noise and digital control circuit and resist reverberation circuit.

* Wide frequency response---digital control circuit.Resist disturbance effectively maintain standing by noises output to zero.* Super silent function,low T.H.D.* Hand-held microphone power level indicator.(The signal lamp will blink continuously to signal replacement of battery.)* With a wide range of up to 50m.* A double-way channels designed to avoid interference.* Uniform cardioid pick up pattern isolates the main sound source and minimizes background noise.* Effec t ive ,bu i l t - in spher ica l res is t ing wind and pop f i l te r in microphone system.* Choose high quality pickup and components for goods effects.* With audio compressing-expanding technology,the machine can lower noises and increase dynamic range.* Used in entertainment places such as on middle stage, karaoke hall or at home.

Transmitting power: <30mW

Antenna: Hid antenna

Receiver: Dynamic cardioid type with uni-direction

Battery: AA x 2

Problem Remedy

1. Turn the power, No LED l ights on

2. No sound output, when RF LED l ights up

3.Work ing range gets shor t

4 . S igna l is not s tab le , and sound qua l i ty is get t ing worse.

Battery is low or the same channel usedaround near. Never use same channelsystem closer.

Check if you have plug the adaptor to the power outlet, or the connection is secure.

Check the volume knob or check the RCA cable is connected with amplif ier with the unit.

The h id antenna is d isconnected or thebat tery is get t ing low, or the rece iver isp laced in a wrong locat ion . Or there iss t rong magnetic f ie lds around here .

w w w . a l i e n p r o . c o m . m x25

w w w . a l i e n p r o . c o m . m x

Foreword

Safety Guidance

Installation

Receiver Specifications

Carrier's frequencies: VHF 174-270MHz

Frequency stability: ±0.005%

Modulation: FM

Deviation: 25KHz (Spectrum spreading technology)

Frequency response: 40Hz-20KHz

Signal/Noise ratio: >85dB

Dynamic range: >80dB

Dynamic distortion: <0.5%

Working covering range: 50 Meters (vary according to surroundings)o oWorking temperature: -10 C to 50 C

Power source: DC12~18V

Power consumption: 2W

Signal/Noise ratio:>85dB

Sensitivity: 60dB S/N (12 dB u)

Mirror interference ratio: >70dB

Neighbor interference ratio: >70dB

Output level: 0-1V

READIN UIDANCE: Must read safety and operating guidance before using this product.STORING GUIDANCE : Keep this instruction in a safe place in order to use it again as a reference in the future.WARNING: Pay attention to the warning on operating this product.USIN TORING: Don't place the product in a high electromagnetic place, or in direct sunshine and in high temperature surroundings not using for a long period, please pull out the power plug and with draw the battery from the microphone.CLEANING: Please pull out the power plug before you clean this unit. Do not use any chemical gas or liquid.POWER: The power of this unit is only available to the standard on label listed, please confirm whether is can use in the voltage range in your location.MAINTENANCE: Please send to authorized dealers or qualified personnel.

AUX BGM

KEY0+1+2+3 +1 +2 +3 +4 +5 +6

dbL R

MUTE BBEL STEREO R VOCALPARTNER

VOCALCANCEL

DVD

+4+5+6

DVD AUX USB BGM AUTOINPUT SELECTOR

SOUND MODE

POWER

KEY CONTROL

BALANCE TREBLE BASS DELAY ECHO REPEAT TREBLE BASS MIC 1 VOL MIC 2 VOL MIC 3 VOL HEADPHONE MIC 1 MIC 2 MIC 3

MUSIC VOLMIC MASTER VOL

MUSIC MIC

USBOFFON

AUX INPUTL RVIDEO

AM-828 MIXING AMPLIFIER

Power Mic 1 Mic 2 Mic 3

Mic 1 Mic 2 Mic 3 Mic Treble Mic Bass Mic Echo

Music Volume

10 10 10 1010

+10-10 +10-10

3D Sound

On Off

KM-110 Karaoke Mixer

On Off

Mic Volume

Power amplifier

Mixer Player

DC Power adapter cable

Mic. Input Mic. InputMic. Input

Power Outlet

POWER

OFFON

1 2 3 4 5 6 7 8 9 0

MIC1 MIC2 VOL1 VOL2 ECHO BASS TREBLE

DOLBYD I G I T A L

CD+GMPEG-4Playback

DVD MPEG-4 KARAOKE PLAYERDGX-106

SD/MMCMINI SD

USB

" to

" c

able

14

14

1) Connect the DC POWER ADAPTER to the receiver s DC INPUT 12V, the other end of DC POWER ADAPTER into the WALL OUTLET.

' then plug

2) Connect one end of a " TO " CABLE to the receiver s UNBALANCE AUDIO OUTPUT (MIX) and the other end to a karaoke mixer, karaoke player or karaoke power amplifier "microphone input. If you are using the BALANCE AUDIO OUTPUT, use a XLR to XLR cable or XLR to " cable.

1 4,

3w w w . a l i e n p r o . c o m . m x

4w w w . a l i e n p r o . c o m . m x

Caution

Receiver Descriptions

Handheld Microphone Operation

1. The position of antenna influences the effects of receiving so the straight line distance must be the shortest from MIC to receiver and no barriers between them.2. Several receivers can be used at the same time,Please check with the authorized dealers.

1. Install the battery correctly as per its polarity.2. Hold the switch button for 1 second to turn on the power. Light will turns green means microphone is now in working condition. When it lights up green, then press switch button shortly, the light will turn yellow, means microphone is in mute mode, no sound will comes out from microphone. to go back to working mode, press the switch button shortly again, the light will turn green.When there is no light, it means the microphone power off. 3. Please take away the battery if you do not use the system for a long period.

Screen head

power lamp

switch

battery room

Low BatteryLed indicator

POWER SwitchON/ST.B/OFF

MIC/Line in

OPEN CLOSE

Battery Cover

BackFront

712 63 4

5

3 4

5

6 7

1) Turn on the receiver by holding the button for 1 second.

2) Power operating indicator

3) Channel 1 operating indicator

4) Channel 2 operating indicator

5) Channel 2 antenna - Provide RF signal for the wireless

system.

6) DC power connection- Main power jack to power the system.

Conect to wall outlet.

7) Audio output jack - Output jack that are used for connecting to

amplifier, mixer or karaoke player. The receiver supports both

balance & unbalance Audio output.