Manual Hydraulic Foundation Machine F2800

F U N D E X E q u ip m en t �

21

4 Technical description This chapter contains a list of the most important general technical specifications of the machine, such as main dimensions, weights, stroke lengths, winch data, etc. After that the specifications will be described in more detail for each main component. 4.1 General Capacities/stroke lengths: Max. length of the perpendicularly to be driven pile (with 28 m leader) : 21,0 m Max. pile/tube weight : 12.0 t Max. block weight : 12 t Max. drill length (with 28 m leader) : 24.0 m Max. drill weight (Fundex FDE45) : 12.0 t Max. drill casing weight : 8.5 t Standard leader length : 28.0 m Max. leader length (option) : 31.0 m Extending table stroke : 1200 mm Max. leader angle forward table retracted : 18.7 ° (= 3 to 1) Max. leader angle forward table extended : 8.8 ° (= 6.5 to 1) Max. leader angle backward (transport position) : 90 ° (= horizontal) Max. allowed angle sideways (correction) : 2.5 ° (= 29 to 1) Dimensions: Transport width : 3500 mm Transport height : 3500 mm Transport length of leader : 18000 mm Total transport length (inc. head) : 20500 mm Swing tail radius (without power pack) : 3400 mm Weights and loads: Total machine weight (inc. 31 m leader, head, top jib, ballast, exc. ram) : 85.0 tons Total machine weight (inc. max. ram and pile) : 110.0 tons Total transport weight (inc. 18 m leader, head, supports, exc. ballast and ram) : 61.0 tons Weight 31 m leader (incl. base and cylinder) : 11.5 tons

Manual Hydraulic Foundation Machine F2800

F U N D E X E q u ip m en t �

22

Ballast part 1 (removable) : 5.3 tons Ballast part 2; 4x (removable) : 2.35 tons Ballast total (3 parts removable) : 14.7 tons Ground pressure underneath tracks : 0.94 N/mm² Ground pressure underneath tracks + supports : 0.63 N/mm² Max. base plate load : 1330 kN Max. front support load : 469 kN Max. rear support load : 434 kN Operational data: Max. wind speed in operation : 20 m/sec Min. temperature : -10 oC Max. temperature : +40 oC Operation class : A0 Load spectrum : 2 Crane group : 2 Hoisting class : B Standards: Calculations of strength : NEN 2018-2020 Machine and wires : NEN-EN 996 and NEN-EN 791 (accepted by NVAF) Stability : NEN-EN 996 (accepted by NVAF) General safety: : European machine directive NEN-EN 292-1&2