Mamut KassaMamut KassaMamut ButikkdataMamut ButikkdataMamut KasseMamut KasseMamut Point of SaleMamut Point of SaleHardware Installation instructions.

Hardware requirementsHardware requirements• PC

– Windows XP, SP2– 512 MB internal memory– 1 Ghz Processor recommened ( 600 Mhz minimum)– Connected to the internet (Installation only)– .Net 1.0, .Net 1.1, Windows Installer 3.1, .Net 2.0, Internet explorer 6.0 (min), MDAC

2.6 are required but can be installed by the software

• Monitior – 1280 * 768 resolution.

• Receipt Printer– Windows XP based, no escape codes.– Driver software– Default papersize 72mm * receipt

• Customer display– Epson characther set compatible– EPSON DM-D110/D-210 printer driver.

• Cash drawer– Connected to receipt printer drawer-kick port.

Software requirementsSoftware requirements

• Mamut Business Software– Latest version of Mamut Business Software

https://cdl.mamut.com/BIN\MBS5152/setup5152.exe

• Mamut Kassa/Kasse/Butikkdata/Point of Sale– Latest version, 1.1.2523

https://cdl.mamut.com/BIN/POS2523/setup.exe

Software InstallationSoftware Installation• Mamut Business Software

– Install the latest version by double clicking on the setupxxxx.exe file– Accept the default choices.– No need to display the readme file.

• Mamut Kassa/Kasse/Butikkdata/Point of Sale– Start the installation by choosing RUN in the START menu– Enter the following command:

c:\program files\mamut point of sale\Setup.exe /v" POSOVERRIDEMBSQUESTIONSILENT="1"

– A screen displaying a warning on the MBS version number will be displayed. Press OK

– In the prerequisite screen press OK.• The required components will be downloaded and installed.• The last component is the installation of the POS software.• Accept all default choices.

• IMPORTANT WHEN CREATING AN IMAGE!:• There is no need to start the software after the installation. You can of course

to a test, but create an image first.

PrinterPrinter

• After installation of the driver software configure the printer

Customer display InstallationCustomer display Installation• Download the DM-D110/D210 driver from Epson• Install the driver DM-D110/D210. • The filename is ADM_301aE_without_TM.exe

https://cdl.mamut.com/BIN/POS2508/epsondriver/ADM_301aE_without_TM.exe

• Create a new printer using this driver and call the printer “Display”.

• Configure the printer according to the screenshots

• NB This is an example where COM4 is used. The setting for writing directly to the “printer” is crucial.

• You might have to restart the pc after installation.

Customer display InstallationCustomer display Installation