Configuration for BTS and CPEStep-1: Default Ip of radio is 192.168.2.66 255.255.255.0 .You can browse radio by any browser,prefer google chrome. Default User name is : admin and default password is : admin01. This is the first page.

Step 2: After logging Status page will open , here you can see the connection status .Signal should be less than -80 means towards to 0.

Step 3: click on configuration tab and then Network tab.Here you can configure IP-addresss (just change only ip addresss here) like belowNote: pls enable secondary ip also like below:

Step 4: click on wireless tab . Here you hace to only configure below points.1. Wireless mode : AccessPoint iPoll at BTS end and "staion ipoll" should be at client side2.country should be "CT" and "non standard channel shoulbd be enable"3. SSID should be " BTS-ID_SectorA/B/C" ex. SHA03_SectorA4. Channel should be one from 5825-5885. you select channel by clicking on "channel list"5. Tx Power should be 29.other settings leave as default.

Press "save & Apply " button on top.

Step 5: For scanning or runnig site survey tool Click on "ToolS tab. And the "site Survey tab" Now press "Start Scan" tab, you will see available networks and signals. Select best ssid , which signal you are getting best. And type that SSID on the SSID box . (step 4)

Step 6 When your CPE is latched with BTS, ( for seeing signal strength follow step 2) . Type the vlan detail in "configuration-> Network page"

Enable Mgmt Vlan and give VLAN-ID.Press save & apply.

Note: Please give VLAN details in last.

Configuration for BTS and CPEStep-1: Default Ip of radio is 192.168.2.66 255.255.255.0 .You can browse radio by any browser,prefer google chrome.

Step 2: After logging Status page will open , here you can see the connection status .Signal should be less than -80 means towards to 0.

Step 3: click on configuration tab and then Network tab.Here you can configure IP-addresss (just change only ip addresss here) like below

1. Wireless mode : AccessPoint iPoll at BTS end and "staion ipoll" should be at client side

4. Channel should be one from 5825-5885. you select channel by clicking on "channel list" Note: you will not see channel list on client side.

Click on "ToolS tab. And the "site Survey tab" Now press "Start Scan" tab, you will see available networks and signals. Select best ssid , which signal you are getting best. And type that SSID on the SSID box . (step 4)

When your CPE is latched with BTS, ( for seeing signal strength follow step 2) . Type the vlan detail in "configuration-> Network page"