Making a ribbon bow to be a ring

Yet making a ribbon bow is the main task during the whole procedure. As long as you learn how to

make big bows out of ribbon well. Then this kind of new ring making can be made out naturally.

What do you need?

Satin ribbon

Ring

Sewing threads

Needle

Beads

Lighter

How to make big bows out of ribbon?

What we display for you is how to make big bows out of ribbon this time. Actually, making a ribbon

bow is just one step of our tutorial. The final goal is to make a ring with a big bow.

Step 1: make a bow

Fold the ribbon two times to make it four

layers in all. Cut the redundant; use lighter

to trim the edge; stick the melting side with

the whole. Sew the middle of the folded

ribbon to make it slightly winkled. Link the

bow to the ring by sewing.

Step 2: add a bead

Thread a bead into the sewing thread. Sew

it on the upper surface of the bow. Tie off

the thread to the small bowl shape of the

ring. Make a knot at the end. Then cut the

redundant sewing threads.

Step 3: the ending work

When you are tie off the thread, you’d better tie it

tight. Thus the bead will not loosen easily. Then you

can wear it to have a try.

The ways of how to make big bows out of ribbon you

have seen are quite easy Add a bead to a ring

following making a ribbon bow. A ring full of vibrant

colors is coming out. If you like it, it is just a piece of

cake for you to learn the steps.

You can find sewing threads at: http://www.lovehobbycraft.com/b-512-sewing-threads.html