MAJOR PUBLIC

WEBCAST AUCTIONMAJOR PUBLIC

WEBCAST AUCTION

K& K Manufacturing

11:00 a.m. (PST),Thursday, July 171500 Dell AvenueCampbell, CA

Inspection: Wednesday, July 16,8:00 AM - 4:00 PMand morning of the salefrom 8:00 AM

GREAT AMERICAN GROUP®

WHOLESALE & INDUSTRIAL SERVICESwww.greatamerican.com • 800-45-great

®

fi

LargeCapacityPrecisionCNCMachiningFacility

2001

2000

Bid Onsiteor BidOnline!

LOS ANGELES • CHICAGO • BOSTON • NEW YORK • ATLANTA • PHILADELPHIA

TOYODA MODEL FA800 CNC 4 AXIS HORIZONTAL 8 PALLET CELL SYSTEM

KAO MING MODEL 3000 SV BRIDGE TYPE, FANUC 18IM CNC CONTROL VERTICAL MACHINING CENTER

SALE DATE:11:00 a.m., Thursday, July 17

SALE LOCATION:1500 Dell Avenue, Campbell, CA

INSPECTION:Wednesday, July 16, 9:00 a.m.- 4:00 p.m. &Morning of Sale from 8:00 a.m.–11:00 a.m.

DIRECTIONS:From San Jose International Airport: Take the 880FWY South towards Santa Cruz. Go past 280 FWYMerge onto the 17 FWY South for 3 miles. TakeExit Camden Ave/ San Tomas EXPY. Turn Right onSan Tomas EXPY. Immediately Veer Right onto theCamden Ave/Dell Ave Exit Towards SunnyoaksAve. Merge Onto Dell Ave. Sale Site is on theCorner of Dell Ave. and Vandell Ave. Please watchfor signs.

TERMS:$500 refundable cash deposit; payment by cash,cashier’s check, business check with bank letter ofguarantee; 25% due upon award; 10% buyer’s pre-mium. (On-line bidders subject to a 13% buyer’spremium.) On-line bidders are required to registeras per instruction on the web site. Certain items aresubject to prior sale.

BBIIDD OONN--LLIINNEE VVIIAA YYOOUURR PPCC::If you are unable to attend the auction... no prob-lem. Register today and bid from the convenienceof your home or office. All items up for bid will bedisplayed via the internet and your bid will bereceived in real time along with the other attendeesat the auction site.

FOR MORE INFOR MATION:Contact Roy Gamityan by email:rgamityan@greatamerican.comor Phone: 818-884-3747, ext. 340

MAJOR PUBLIC

WEBCASTAUCTION

GREAT AMERICAN GROUP®

WHOLESALE & INDUSTRIAL SERVICES

CORPORATE HEADQUARTERS6330 Variel Avenue,

Woodland Hills, CA 91367Tel. 818-884-3737 • Fax 818-884-3561

www.greatamerican.com

®

REGIONAL OFFICES:CHICAGO • BOSTON • NEW YORK

• ATLANTA • PHILADELPHIA

K & KManufacturing

CNC 4 AXIS HORIZONTAL 8 PALLET CELL SYSTEM2000 TOYODA MODEL FA800, 31” X 31.5” Sq. Shuttle Pallets, W/ Pallet Receiver and (1) Load Station, Full Contouring 4th Axis,(8) Pallet RGV System, 53.1” X-Axis Travel, 45.2” Y-Axis Vertical Spindle Travel, 45.2” Z-Axis Column Travel, 51.2” X 51.2”Workpiece Swing, Spindle Speeds 35 to 12,000 RPM, CT 50 Taper, 1,000 PSI Coolant Through Spindle, Probing, Fanuc 16IMB CNCControl, 120 ATC, S/N NM8536, Replacement Cost $1,400,000

Full 4th

Full 4th

1 of 2

$1.4 MillionReplacement Cost

$1.4 MillionReplacement Cost

50Taper

WWW.GREATAMERICAN.COM

1999 TOYODA MODEL FA630, FANUC 16IM CNCCONTROL, (2) 24” Sq. Pallets, 4th Axis Shuttle Pallet RotaryTable, 36.5” X-Axis Travel, 33” Y-Axis Vertical Spindle Travel,31.5” Z-Axis Pallets, Full Contouring 4th Axis, Spindle Speeds To10,000 RPM, 40 HP Spindle, 60 Tool ATC, CT50 Taper, 1,000 PSICoolant Through Spindle, Chip Conveyor, S/N NM7904

1997 TOYODA MODEL FA630, FANUC 16IM CNCCONTROL, (2) 24” Sq. Pallets, 4th Axis Shuttle Pallet RotaryTable, 36.5” X-Axis Travel, 33” Y-Axis Vertical Spindle Travel,31.5” Z-Axis Pallets, Full Contouring 4th Axis, Spindle Speeds To10,000 RPM, 40 HP Spindle, 60 Tool ATC, CT50 Taper, 1,000 PSICoolant Through Spindle, Chip Conveyor, S/N NM8801

NIIGATA MODEL EN50B, FANUC 6MB CNC CONTROL, (2)24” Sq. 4th Axis Shuttle Pallet Rotary Table, 24.8” X-AxisTravel, 21.6” Y-Axis Vertical Spindle Travel, 19.6” Z-Axis PalletCarriage Travel, Full Contouring 4th Axis, Spindle Speeds To4,500 RPM, 25 Tool ATC, Rigid Tapping, CT40 Taper, CoolantThrough Spindle, Chip Conveyor, S/N 15069

1988 NIIGATA MODEL PN40 FANUC 15M CNC CONTROL,(2) 15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel, 17”Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet Carriage Travel,Full Contouring 4th Axis, Spindle Speeds To 6,000 RPM, 15HPSpindle, 24 Tool ATC, Rigid Tapping, CT40 Taper, Chip Conveyor,S/N 25419

1988 NIIGATA MODEL PN40 FANUC 11M CNC CONTROL,(2) 15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel,17” Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet CarriageTravel, Spindle Speeds To 6,000 RPM, 15HP Spindle, 24 ToolATC, Rigid Tapping, CT40 Taper, Chip Conveyor, S/N 14013

1988 NIIGATA MODEL PN50B FANUC 15M CNC CONTROL,(2) 15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel, 17” Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet Carriage Travel, FullContouring 4th Axis, Spindle Speeds To 6,000 RPM, 15HP Spindle,Rigid Tapping, 24 Tool ATC, CT50 Taper, Chip Conveyor, S/N 16617

1987 NIIGATA MODEL PN40B FANUC 6M CNC CONTROL,(2) 15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel,17” Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet CarriageTravel, Spindle Speeds To 6,000 RPM, 15HP Spindle, RigidTapping, 24 Tool ATC, CT40 Taper, Chip Conveyor, S/N 14203

1987 NIIGATA MODEL PN40 FANUC 6M CNC CONTROL,(2) 15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel,17” Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet CarriageTravel, Spindle Speeds To 6,000 RPM, 15HP Spindle, 24 ToolATC, Rigid Tapping, CT40 Taper, Chip Conveyor, S/N 16365

1984 NIIGATA MODEL PN40 FANUC 15M CNC CONTROL, (2)15.75” Sq., Shuttle Pallet Rotary Table, 22” X-Axis Travel, 17” Y-Axis Vertical Spindle Travel, 22” Z-Axis Pallet Carriage Travel,Spindle Speeds To 6,000 RPM, 15HP Spindle, 24 Tool ATC, RigidTapping, CT40 Taper, Chip Conveyor, S/N 16406

(9) CNC HORIZONTAL MACHINING CENTERS

1 of 2

1 of 2 2001

2003 50Taper

OPEN FORINSPECTION:Wednesday, July 16,

9:00 a.m.- 4:00 p.m. &Morning of Sale from8:00 a.m.–11:00 a.m.

WWW.GREATAMERICAN.COM

(2) CNC VERTICAL MACHINING CENTERS

2001 KAO MING MODEL 3000 SV BRIDGE TYPE, FANUC18IM CNC CONTROL, 49.21” X 118.11” Table, 15,400 LBS.Load Capacity, 127” X-Axis Travel, 55” Y-Axis Saddle Travel, 34”Z-Axis Head Travel, 35.59”, Distance Between Two Columns59.05”, 41.34” Max. Distance from Top of Table to Spindle Nose,Spindle Speed: 35-8,000 RPM, 30/35 HP Spindle Drive, 50Taper Spindle, 40 Tool ATC, Coolant System, Chip Conveyor, S/NM31141 (SEE FRONT COVER FOR PHOTO)

2003 OKUMA HOWA MODEL 1052V, FANUC 16IM CNCCONTROL, 86.61” X 41.3” Table, 11,000 LB. Load Capacity,80.71” X-Axis Travel, 41.73” Y-Axis Saddle Travel, 31.50” Z-AxisHead Travel, 39.4” Max. Distance from Top of Table to SpindleNose, Speeds: 30-6000 RPM, 30 HP Spindle Drive, 50 CAT TaperSpindle, 36 Tool ATC, Rigid Tapping, Renishaw Probe, CoolantSystem, Chip Conveyor, S/N 11119

TOOLROOM EQUIPMENTGAZIANO 20” X 96” BED TYPE LATHE, Model SAG 20, CrossSlide, Tailstock, S/N 36672

HARDINGE MODEL HLV-H LATHE, S/N HLV-B-169

LAGUN MODEL 250 VERTICAL MILL, 10” X 50” Table, 34”Long. Table Travel, Servo Type 140 Power, Long Table Feed, 3HP Variable Speed Head, 50-4500 RPM, R-8 Spindle Taper, SonyMillman 2-Axis D.R.O., S/N’s SE-36408, SE36407, SE-36470

(4) LAGUN MODEL FTV-2 VERTICAL MILLS, 10” X 50” Table,34” Long. Table Travel, Servo Type 140 Power, Long Table Feed,3 HP Variable Speed Head, 50-4500 RPM, R-8 Spindle Taper,Sony Millman 2-Axis D.R.O., S/N’s SE-36408, SE36407, SE-36470

(3) BRIDGEPORT SERIES 1 VERTICAL MILLS, 9” X 48” Table,Bridgeport Late Type Power Long. Table Feed, Model 2J – 2 HPVariable Speed Head, 60-4200 RPM, Hard Chrome Knee &Saddleways

(2) TREE MODEL 2UVR VERTICAL MILLS

SUNNEN HONE, Model MBB-1600, 1/2 HP Motor, S/N 42752

(10) ROCKWELL/DELTA 20”, Model 28-3X5, 24” Sq. TitlingTable, Blade Speeds: 50-4500 RPM, 1 HP Motor, Blade Welder &Grinder, S/N 1524121

COVEL SURFACE GRINDER

SCREW TYPE AIR COMPRESSORS

ATLAS COPCO MODEL GA45FF, 50 HP Screw Type, CabinetEnclosure, Skid Base, S/N AII363061H

KAESER, 50 HP Screw Type, Cabinet Enclosure, Skid Base

1 of 2

1 of 43

Axis

BID ON-LINE VIA YOUR PC!Register today and bid from the convenience of your home or office. All items up for bid will be displayed via the

internet and your bid will be received in real time along with the other attendees at the auction site.WWW.GREATAMERICAN.COM

PRECISION MACHINE TOOLING100’S of BT- 50 & 40 Endmill Holders, Floating Tap Holders,Collet Holders, Extended Endmill Holders, Morse Taper TypeEndmill Holders, Carbide Inserted Facemills, Facemill Holders,Right Angle Spindle Adapters, Many Configurations, Types,Bridgeport Right Angle Spindle Attachment, Drill Press Vises,Tilting Vises, 2-Axis Tilting Drill Press Type Vises, PrecisionAngle Plates, News 10” T-Slotted Rotary Table With Vert./Horiz. Base, Kurt Mill Vises, Collets, Chucks, Large Quantity#BT40 Taper Endmill Holders, Collet Holders, Extended EndmillHolders, Inserted Face & Shell Mills, Drill Holders, CarbideInserted & High Speed Steel Endmills, Carbide Inserted & HighSpeed Steel Horizontal Milling Cutters, Twist Drills, Pipe & BoltTaps, Counterbores, Countersinks, Reamers, AdjustableReamers, Inserted Blade Type Reamers, Carbide Inserted Face& Shell Mills

INSPECTION TOOLS(4) Mitutoyo Height Masters, Mitutoyo Digital Calipers, HoleMicrometers, Dial Bore Gauges, Digital Height Gauges, Blade &Pin Type Micrometers, Precision Squares, Dial Type I.D. RingGroove Gauges, Pin Gauges, Vernier Calipers, PrecisionProtractors, Plug Type Thread Gauges, Ring Type ThreadGauges, Numerous Surface Plates in Assorted. Sizes, LargeCapacity Precision 8’ X 10’ X 14-1/2” Gray Granite On Stands,Precision 4’ X 6’ X 9” Black Granite On Fabricated Stand,Precision 2’ X 3’ X 4-1/2” Black Granite, Cabinet Base,Precision 4’ X 5’ X 9” Black Granite On Shop Fabricated Stand,Precision 4’ X 6’ X 8-1/2” Black Granite On Stand; Precision 3’X 4’ X 6” Black Granite

(2) Varian Helium Vacuum Leak Rate Testers W/ InternalVacuum Pumps, Model 436-70

COORDINATE MEASURINGMACHINES

Mitutoyo Model BJ-1015L, 40” X 60” X 32” MeasuringRange, Renishaw Probe, S/N 0031572

Mitutoyo Model BH-710, 27” X 52” X 28” Measuring Range,Renishaw Probe, S/N A9106006

Mitutoyo Model BHIJ-1015L, 28” X 24” X 24” MeasuringRange, Renishaw Probe, S/N 9001565

On Vacation...Can’t Attend?Bid live on the internetfrom your PC at your hotel

or in your room.

1 of 8

SHOP AND WAREHOUSEEQUIPMENT

(6) Versa Tap Model 12 Tapping Machines, (10) Rockwell DrillPresses, Pexto Shear, Doall 10” Bench Type Abrasive Chop SawW/3 HP Motor, Conrac 5” Diamond Wheel Tool LapperW/Tilting Table, Baldor 6” Double End Bench Grinders;Worktables; 4” X 6” Compact Horizontal Bandsaw, PortableDust Collection Units, Shop Fans, Portable Cecor “Sump Sucker”Coolant Pumping & Filtration System, Model CE50-150/150TW,150 Gal. Cap., S/N 45053, Aluminum Folding Step Ladders,Blaser Pneumatic Drum Pump, Plastic Waste Coolant HoldingTank, Manual Drum Pump, Misc. Heavy Duty Fabricated SteelDie & Tooling Storage Racks, Warehouse Carts, Misc.Warehouse Rack Sections, Announcement Boards, ToolCabinets, Lista Tooling Storage Cabinets, Pallet Jacks, ChipTubs, Folding Fiberglass & Aluminum Ladders, PressureWashers, Metal Storage Cabinets, Tool Cabinets, Mobile WireShelf Units, Shop Supplies, Abrasive Shop Supplies, FlammableMaterial Storage Cabinets, Tray Carts, Gas Regulators, MicroairWelding Fume & Smoke Exhaust System, Custom Tig RodStorage Cabinet, Baldor 4” Belt Grinder, 40 T. Cap. H-FrameHydraulic Shop Press, Forklift Jib Boom Attachment & More!

WWW.GREATAMERICAN.COM

GREAT AMERICAN GROUP®

WHOLESALE & INDUSTRIAL SERVICES®

6330 Variel Avenue, Suite 100Woodland Hills, California 91367

PresortedFirst Class

U.S. Postage

PAIDLos Angeles, CAPermit No. 32365

ATTENTION:PLANT MANAGER &MACHINERY BUYER!

MAJOR PUBLIC

WEBCAST AUCTION

11:00 a.m. (PST), Thursday, July 171500 Dell Avenue, Campbell, CA

K & K Manufacturing

LARGECAPACITYPRECISION

CNCMACHININGFACILITY

VAN TRUCKS2004 Isuzu Model NPR-HDBox Truck

1997 Isuzu Box Truck

FORKLIFTSToyota 3,000 LB. Cap., Model 425-FG15, LP Gas Engine, Solid Cushion Tires,Triple Stage Mast, S/N 405FG0170243

Clark 3,000 LB. Cap., Model C500-030,LP Gas Engine, Solid Cushion Tires, TripleStage Mast S/N 235-0103-6155FA

PEDESTAL JIB CRANES

(7) Free Standing 360 Degree 2-TonCapacity X 12’ Hook HT. X 14’ Reach, 2-Ton Capacity Electric Chain Hoist W/Pendant Control

1 of 7

1 of 2

1 of 2

1 of 61 of 4

FOR MOREINFORMATION:

Contact Roy Gamityan:rgamityan@greatamerican.com

or Phone: 818-884-3747,extension 340