magnetically actuated proximity sensors -...
TRANSCRIPT
Magnetically Actuated Proximity SensorsOverview
861Subject to change
Sensors With Mounting Bracket
with integral cable with plugSME-1-B SME-1-S-24-Bwith LED with LEDSME-1-LED-24-B SME-1-S-LED-24-Bheat resistant version:SME-1-S6-Cstainless steel version:SME-1-S9
For Cylinder Types:**DGO-... DNG-... DNGS-... ESW-...
DNGL-... DSW-... DNGZK-...DRQ-... with a piston dia. of 40 to 100 mmDZH-... with a piston dia. of 32 to 63 mm / 1-1/4 to 2-1/2 in
Sensors Without Mounting Bracket*
Inductive
SMTO-6-PS-S-LED-24
design proof against interference from welding operations
SMTSO-1-PS-S-LED-24
For Cylinder Types: DNG...-... DKE-...
Electric
Sensors for Tie-rod Cylinders, and Cylinders with Integral Sensor Rail**
Sensors for Cylinders with Dove-tail Sensor Groove
Electric Inductive
with integral cable with plug8.2 ft / 2.5 m long SME-3-SL-LED-24-BSME-3-LED-24
16.4 ft / 5 m longSME-3-LED-24-K5
with lateral plugSME-3-SQ-LED-24-B
For Replacement Cylinder Type:EZH-10/40-40-A***
with integral cable with plugPNP output: SMT-3-PS-KL-LED-24 PNP output: SMT-3-PS-SL-LED-24-BNPN output: SMT-3-NS-KL-LED-24 NPN output: SMT-3-NS-SL-LED-24-B
with lateral integral cable with lateral plugPNP output: SMT-3-PS-KQ-LED-24 PNP output: SMT-3-PS-SQ-LED-24-BNPN output: SMT-3-NS-KQ-LED-24 NPN output: SMT-3-NS-SQ-LED-24-B
* For mounting brackets see pages 865.
** The type of cylinder being used MUST BE KNOWN, so that the correct sensors can be selected.
*** New type EZH-10/40-40-A-B (164990) use sensors, type SME/SMT-8-...
www.shuntu.net 010-86879366(Beijing)
862
Magnetically Actuated Proximity SensorsOverview
(Ref. 1.350-3) (10.95) Subject to change
Sensors Without Mounting Bracket *
Electric Inductive
with integral cable with plugSMEO-1-B SMEO-1-S-24-Bwith LED with LEDSMEO-1-LED-24-B SMEO-1-S-LED-24-BSMEO-1-LED-230-Bwith 16.4 ft / 5 m long cableSMEO-1-LED-24-K5-BSMEO-1-LED-230-K5-Bheat resistant version:SMEO-1-S6-C
Heavy Duty Proximity Sensors Pneumatic Reed Switch
For Cylinder Types: DGL...-... DNG...-... DSW-...DKE-... DNZ-... DZH-...DN-... DRQ-... ESW-...
with integral mounting without mounting bracket bracket
with plug with plugSME-2-LED-24 SMEO-2
SMEO-2-LED-24
For Cylinder Types:**DKE-... DNNZ-...*** ESW-...
DGO-... DN-... DNU...-...***DNG...-...DNGU...-...*** DSW-...
SLE-... with a piston dia. of 32 and 40 mmDRQ-... with a piston dia. of 40 to 100 mmDZH-... with a piston dia. of 32 to 63 mm / 1-1/4 to 2-1/2 in
with integral cable with plugPNP output: PNP output:SMTO-1-PS-K-LED-24-C SMTO-1-PS-S-LED-24-CNPN output: NPN output:SMTO-1-NS-K-LED-24-C SMTO-1-NS-S-LED-24-C
SMPO-1-H-B
* For mounting brackets see pages 865.
** The type of cylinder being used MUST BE KNOWN, so that the correct sensors can be selected.
*** For replacement applications.
www.shuntu.net 010-86879366(Beijing)
Magnetically Actuated Proximity SensorsOverview
863Subject to change (Ref. 3/1-2) (97/98)
Plug-in sensors with a “-S-” in the designation have a threaded M8 connection with the exception of SMTO-6-... andSMTSO-1-... which have a threaded M12 connection.Blue shading identifies the sensors that can be used with each cylinder type.
Matching cylinders,proximity sensors,
and mounting brackets
ProximitySensors
DZH-A with a pistondia of 32 to 63 mm1-1/4 to 2-1/2 in(See next page forsmall bore DZH-Acylinders)
* Proximity sensors include mounting bracket Type SMB-1.
150002
SMBT-1
Only for SMTO-6 and
SMTSO-1 proximity
sensors
Cylinder TypeSLE with a piston DNG-A Replacement Replacement ESW-A-B
dia. of 32 and 40 mm DNGL-A Cylinders Cylinders DSW-A-B DGO-B
(See next page for DNGZK-A DNN-A ESN-A DN-A
small bore SLE DNGLZ-A DNN-A-S9 DSN-A DNZ-A
cylinders) DNGZS-A DNNZ-A DGS-A
For Replacement DKE-A ESNN-A
Cylinders DSNN-A
DNU-A DRQ-A with a piston
DNUL-A dia. of 40 to 100 mm/
DNGU-A 1-1/2 to 4 in
DNGUL-A
DNUT-A
DNGUT-A
Bore Bore
Inch 1-1/4 to 2 in 2-1/2 to 5 in 1-1/4 to 2 in 2-1/2 to 4 in 5 to 6 in
Metric 32 to 50 mm 63 to 125 mm 32 to 50 mm 63 to 100 mm 125 to 320 mm
Type Part #
SME-1-B 151668*
SME-1-LED-24-B 151669
SME-1-S-24-B 150850*
SME-1-S-LED-24-B 150851*
SME-1-S6-C 151670*
SMEO-1-B 30457
SMEO-1-LED-24-B 30459
SMEO-1-LED-24-K5-B 151672
SMEO-1-LED-230-B 151671
SMEO-1-LED-230-K5-B 160998
SMEO-1-S-24-B 150847
SMEO-1-S-LED-24-B 150848
SMEO-1-S6-C 151673
SMPO-1-H-B 31008 DRQ 40 and 50 mm
dia. only
SMTO-1-PS-K-LED-24-C 151683
SMTO-1-NS-K-LED-24-C 151684
SMTO-1-PS-S-LED-24-C 151685
SMTO-1-NS-S-LED-24-C 151686
SME-2-LED-24 10790*
SMEO-2 11884
SMEO-2-LED-24 11885
SMTO-6-PS-S-LED-24 35573
SMTSO-1-PS-S-LED-24 30441
CRSMEO-4-K-LED-24 161775
36173 36174 36162 36163 11886 13376
SMBU-1-B SMBU-2-B SMB-2-B SMB-3-B SMB-1 SMB-11
150216 152828 Any mounting
SMBU-1-H-32 SMBU-3-B kit and cylinder
Only for For a piston dia. up to switch may be
SMPO-1-H-B 125 mm chosen for type
mounted on DGO-B
DNU, DNUL,
DNGU,
Mounting DNGUL,
Brackets DNUT-32
www.shuntu.net 010-86879366(Beijing)
ProximitySensors
ESNU-ADSNU-ADSNUL-A
SLE with apiston dia. of16 and 25 mm(See previouspage for largerbore SLEcylinders)
ReplacementCylindersAV-AAVL-AADV-AEZH-A
ADVU-AADVUL-AADVULQ-AADVUPADVUTAEVU-AAEVULQ-AAEVULQZ-AAEVUZ-A
DGEDGELDFMDGP-ADGPIDGPILDGPIL-HDDGPL-ADMM-ADMML-A
DNCDPZDPZJDRQ with apiston dia. of16 to 32 mm
DRQDDSLDZF
DZH-Awith a pistondiameter of 16,20 and 25 mm5/8, 3/4, and1 in(See previouspage for largerbore DZH-Acylinders)
EMM-AEMML-AEMMLZ-AEMMZ-AEZH-A-BHGDHGPHGRHGWHMPSLM-...SLZ-...SPZSTASTAF
Type CRSMB-...*For Cylinder Type CRDNG and CRDNGS.
Type CRSMBR-...*For Cylinder TypeCRDSNU, CRDSWand CRDG
Type SME-8... / SMT-8...No mounting kit is required.
For ESW/DSW and DSNU/ESNU cylinders, use mounting kit type SMBR-8-...
Type SMTS-8E-PS-M12-LED-24 includes mounting bracket.Type SMEO/SMTO/SMPO-8E mount to sensor groove
using mounting kit SMB-8E.
864
Shading identifies the sensors that can be used with each cylinder type.
(Ref. 3/1-3) (97/98) Subject to change
Matching cylinders,proximity sensors,
and mounting brackets
MountingBrackets
CRDNGCRDNGSCRDSNUCRDSWCRDG
SLTSLFSLSADVC/AEVC032-100
*See page 887 for dimensions of mounting brackets Type CRSMB-... and Type CRSMBR-...
ADVC/AEVC06-25DFC
Magnetically Actuated Proximity SensorsOverview
No mountingkit required
Cylinder Type
Type Part #SME-3-LED-24 12112SME-3-LED-24-K5 30291SME-3-SL-LED-24-B 150853SME-3-SQ-LED-24-B 150854SMT-3-NS-SL-LED-24-B 150866SMT-3-NS-SQ-LED-24-B 150867SMT-3-PS-SL-LED-24-B 150868SMT-3-PS-SQ-LED-24-B 150869SMT-3-PS-KL-LED-24 30976SMT-3-NS-KL-LED-24 30977SMT-3-PS-KQ-LED-24 31011SMT-3-NS-KQ-LED-24 31012CRSMEO-4-K-LED-24 161775SMEO-4-K-LED-24 15708SMEO-4-K-LED-230 15709SMEO-4-S-LED-24-B 150849SMTO-4-PS-K-LED-24 30471SMTO-4-NS-K-LED-24 30472SMTO-4-PS-S-LED-24-B 150861SMTO-4-NS-S-LED-24-B 150860SMEO-4U-S-LED-24B 151526SMEO-4U-K-LED-24 36198SMEO-4U-K-LED-230 150011SMTO-4U-PS-K-LED-24 152836SMTO-4U-NS-K-LED-24 152837SMTO-4U-PS-S-LED-24 152742SMTO-4U-NS-S-LED-24 152743SME-8-K-LED-24 150855SME-8-S-LED-24 150857SME-8-K-LED-230 152820SME-8-O-K-LED-24 160251SME-8-K-24-S6 161756SMEO-8/SMTO-8/SMPO-8SMT-8-PS-K-LED-24 150864SMT-8-NS-K-LED-24 150862SMT-8-PS-S-LED-24 150865SMT-8-NS-S-LED-24 150863SMTSO-8E-PS-M12-LED-24 191986SMTSO-8E-NS-M12-LED-24 175825SME-8C-KL-LED-24 161751SME-8C-KQ-LED-24 161752SME-8C-SL-LED-24 161757SME-8C-SQ-LED-24 161753SME-8C-KL-LED-230 161754SME-8C-KQ-LED-230 161755SME-8C-KQ-24-S6 161758SME-10-KL-LED-24 173210SME-10-KQ-LED-24 173211SME-10-SL-LED-24 173212SME-10-SQ-LED-24 173213SMT-10-PS-KL-LED-24 173218SMT-10-PS-KQ-LED-24 173219SMT-10-NS-KL-LED-24 173222SMT-10-NS-KQ-LED-24 173223SMT-10-PS-SL-LED-24 173220SMT-10-PS-SQ-LED-24 173221SMT-10-NS-SL-LED-24 173224SMT-10-NS-SQ-LED-24 173225SMPO-8E 178563
19272 SMBR-8
19273 SMBR-10
19274 SMBR-12
19275 SMBR-16
19276 SMBR-20
www.shuntu.net 010-86879366(Beijing)
Mounting brackets Mounting possibilitiesType SMB-1for 6 mm dia. mounting rod,through rod or DUO-rail
Order Number
Part No. Type
11886 SMB-1
Type SMB-...-Bfor cylindersType DNG, DNGL, DNGZK,
DNGLZ, DKE
Order Number
Part No. Type Part No. Type
36162 SMB-2-B 36163 SMB-3-B
Type SMBU-...for cylinders
Type DNU, DNUL, DNUT,DNGU, DNGUL, DNGUT
Order Number
Part No. Type Part No. Type
36173 SMBU-1-B 152828 SMBU-3-B
36174 SMBU-2-B
Type SMBR-...for cylinders ESNU, DSNU, DSNUL
Order Number
Part No. Type Part No. Type
19272 SMBR-8 19275 SMBR-16
19273 SMBR-10 19276 SMBR-20
19274 SMBR-12 19277 SMBR-25
Type SMBR-10-...for the mounting of cylinder switches Type SME-10 and SMT-10 on round cylindersOrder Number
Part No. Type Part No. Type
173226 SMBR-10-6 175104 SMBR-10-25
175101 SMBR-10-8 175105 SMBR-10-32
173227 SMBR-10-10 175106 SMBR-10-40
175102 SMBR-10-12 175107 SMBR-10-50
173228 SMBR-10-16 175108 SMBR-10-63
175103 SMBR-10-20
Type SMBR-8-...for the mounting of cylinder switches Type SME-8 and SMT-8 on round cylindersOrder Number
Part No. Type Part No. Type
175091 SMBR-8-8 175096 SMBR-8-25
175092 SMBR-8-10 175097 SMBR-8-32
175093 SMBR-8-12 175098 SMBR-8-40
175094 SMBR-8-16 175099 SMBR-8-50
175095 SMBR-8-20 175100 SMBR-8-63
Type SMB-11for Linear UnitType DGOL
Order Number
Part No. Type
13376 SMB-11
Type SMBT-1for cylinders with tie rod and bore - 32 to 100 mm
Order Number
Part No. Type
150002 SMBT-1
Magnetically Actuated Proximity SensorsMounting Bracket Overview
865Subject to change (Ref. 3/1-4) (97/98)
www.shuntu.net 010-86879366(Beijing)
Type SMB-1 Type SMB-2-BSMB-3-B
B1 B2 L1 L2Type in / mm in / mm in / mm in /mm
SMB-2-B 0.71 / 18 0.43 / 11 0.91 / 23 0.46 / 11.6
SMB-3-B 1.02 / 26.8 0.54 / 13.7 1.02 / 26 0.43 / 10.8
Type SMBU-1-B Type SMBR-...SMBU-2-BSMBU-3-B
Bore B1 B2 B3 H1 H2 H3mm in / mm in / mm in / mm in / mm in / mm in / mm
8 0.83 / 21 – 0.55 / 14 0.93 / 23.5 0.65 / 16.5 0.35 / 9
10 0.87 / 22 0.02 / 0.5 0.55 / 14 1.02 / 26 0.73 / 18.5 0.39 / 10
12 0.87 / 22 0.16 / 4 0.43 / 11 1.12 / 28.5 0.79 / 20 0.04 / 10.2
16 0.89 / 22.5 0.16 / 4 0.45 / 11.5 1.32 / 33.5 0.89 / 22.5 0.48 / 12.4
20 1.04 / 26.5 0.22 / 5.5 0.53 / 13.5 1.40 / 35.5 0.89 / 22.5 0.55 / 14
25 1.24 / 31.5 0.30 / 7.5 0.63 / 16 1.59 / 40.5 0.98 / 25 0.63 / 16
Type SMB-11 Type SMBT-1
Type SMBR-10-... Type SMBR-8-...
B1 B2 B3 H1Type in / mm in / mm in / mm in / mmSMBR-8-8 0.74 / 18.9 0.48 / 12.3 0.28 / 7 0.69 / 17.5SMBR-8-10 0.80 / 20.4 0.54 / 13.7 0.28 / 7 0.78 / 19.9SMBR-8-12 0.89 / 22.7 0.56 / 14.3 0.28 / 7 0.86 / 21.9SMBR-8-16 1.03 / 26.1 0.67 / 17.1 0.28 / 7 1.01 / 25.7SMBR-8-20 1.31 / 33.2 0.82 / 20.8 0.35 / 9 1.20 / 30.4SMBR-8-25 1.44 / 36.5 0.89 / 22.6 0.35 / 9 1.20 / 35.6SMBR-8-32 1.64 / 41.7 0.96 / 24.6 0.35 / 9 1.68 / 42.7SMBR-8-40 1.85 / 47.1 1.04 / 26.5 0.35 / 9 2.0 / 50.7SMBR-8-50 2.22 / 56.4 1.13 / 28.6 0.35 / 9 2.42 / 61.5SMBR-8-63 2.73 / 69.4 1.26 / 32 0.35 / 9 2.93 / 74.5
B1 B2 B3 B4 H1Type in / mm in / mm in / mm in / mm in / mmSMBR-10-6 0.61 / 15.6 0.37 / 9.4 0.28 / 7 0.53 / 13.5 0.53 / 13.5SMBR-10-8 0.74 / 18.9 0.48 / 12.3 0.28 / 7 0.75 / 19 0.69 / 17.5SMBR-10-10 0.80 / 20.4 0.54 / 13.7 0.28 / 7 0.75 / 19 0.78 / 19.9SMBR-10-12 0.89 / 22.7 0.56 / 14.3 0.28 / 7 0.75 / 19 0.86 / 21.9SMBR-10-16 1.03 / 26.1 0.67 / 17 0.28 / 7 0.75 / 19 1.01 / 25.7SMBR-10-20 1.31 / 33.2 0.82 / 20.8 0.35 / 9 0.75 / 19 1.20 / 30.4SMBR-10-25 1.44 / 36.5 0.89 / 22.6 0.35 / 9 0.75 / 19 1.20 / 30.6SMBR-10-32 1.64 / 41.7 0.96 / 24.5 0.35 / 9 0.75 / 19 1.68 / 42.7SMBR-10-40 1.85 / 47 1.04 / 26.5 0.35 / 9 0.75 / 19 2.0 / 50.7SMBR-10-50 2.22 / 56.4 1.13 / 28.6 0.35 / 9 0.75 / 19 2.42 / 61.5SMBR-10-63 2.73 / 69.4 1.26 / 32 0.35 / 9 0.75 / 19 2.93 / 74.5SMBR-10-63 2.73 / 69.4 1.26 / 32 0.35 / 9 0.75 / 19 2.93 / 74.5
B1 B2 L1Type in / mm in / mm in / mm
SMBU-1-B 0.75 / 19 0.33 / 8.5 1.18 / 30
SMBU-2-B 1.22 / 31 0.53 / 13.5 1.34 / 34
SMBU-3-B 1.22 / 31 0.53 / 13.5 1.47 / 37
Magnetically Actuated Proximity SensorsMounting Bracket Dimensions
866 (Ref. 3/1-5) (97/98) Subject to change
Dimensionsa 0.61 in / 15.5 mmb 0.35 in / 9 mmc 0.24 in / 6 mmd 1.34 in / 34 mm
Dimensionsa 1.34 in / 34 mmb 0.87 in / 22 mm
Dimensionsa 1.34 in / 34 mmb 0.87 in / 22 mm
Dimensionsa 0.39 in / 10 mm
øe
Dimensionsa 0.47 in / 12 mmb 1.06 in / 27 mmc 1.30 in / 33 mmd 1.61 in / 41 mme 0.18 in / 4.5 mm
Dimensionsa 1.81 in / 46 mmb 2.17 in / 55 mmc 0.63 in / 16 mmd 0.39 in / 10 mm
Proximity sensors SMTO-6, SMTSO-11
Proximity sensors SMEO, SMTO, SMPO-1
1
Proximity sensorType SME-10-..., SMT-10-...Guide groove forsensor cable
2
1
Proximity sensorType SME-8-..., SMT-8-...Guide groove forsensor cable
2
1
Proximity sensors SMEO, SMTO, SMPO-1
1
Proximity sensors SMEO-4, SMTO-4, SMEO-4U1
Proximity sensors SMEO-1, SMTO-1, SMPO-1
1
Proximity sensors SMEO, SMTO, SMPO-1
Proximity sensors SMEO-22
1
Dimensionsa 0.75 in / 19 mm
www.shuntu.net 010-86879366(Beijing)
867Subject to change (Ref. 8.4/10-3) (98)
Plug-in Sockets/Cables with IP 65 Protection
Design: Straight (GD) Cable Length Part No. Type
2.5 meter164257 SIM-K-GD-2.5-PU8.2 feet
5 meter164256 SIM-K-GD-5-PU16.4 feet
Design: Angle 90° (WD) 2.5 meter164255 SIM-K-WD-2.5-PU8.2 feet
5 meter164254 SIM-K-WD-5-PU16.4 feet
Threaded Sockets/Cables, with M8 x 1 Thread for IP 67 Protection
Design: Straight (GD) Cable Length Part No. Type
2.5 meter159420 SIM-M8-3GD-2.5-PU8.2 feet
5 meter159421 SIM-M8-3GD-5-PU16.4 feet
Design: Angle 90° (WD) 2.5 meter159422 SIM-M8-3WD-2.5-PU8.2 feet
5 meter159423 SIM-M8-3WD-5-PU16.4 feet
Sockets for sensors with PNP/NPN circuitry with LED
PNP2.5 meter 159424 SIM-M8-3WD-2.5-PSL-PU8.2 feet
PNP5 meter 159425 SIM-M8-3WD-5-PSL-PU16.4 feet
NPN2.5 meter 159426 SIM-M8-3WD-2.5-NSL-PU8.2 feet
NPN5 meter 159427 SIM-M8-3WD-5-NSL-PU16.4 feet
Magnetically Actuated Proximity SensorsSockets for Sensors with 8 mm Push-in or M8x1 Threaded Plug
Either plug-in or threaded sockets can be used with Festo sensors with a “-S-” in the type designation. For IP 67 protection,a threaded socket must be used with a threaded plug. When using sockets/cables with integral LED for PNP or NPN sensors,make sure to specify (-PSL, -NSL) versions.
3-wire cable, 8.2 ft / 2.5 m or 16.4 ft / 5 m long connector nut ...-PU = Polyurethane cable(3 x 0.01 in2 / 3 x 0.252 for M8 x 1) operating status LED-Indicator yellowPSL = gray cable, for PNP power control LED-Indicator greenNSL = black cable, for NPN
only forType PSLand NSL
a 1.18 in / 30 mmb 1.12 in / 28.4 mmc 0.31 in / 8 mmd 0.22 in / 5.7 mme 0.17 in / 4.2 mm
a 0.35 in / 9 mmb 0.17 in / 4.2 mme 0.67 in / 17.1 mmf 0.36 in / 9.2 mmg 1.04 in / 26.3 mm
a 0.35 in / 9 mmb 0.17 in / 4.2 mm
c 0.96 in / 24.4 mmd 1.27 in / 32.3 mm
c 0.31 in / 8 mmd 0.22 in / 5.7 mme 0.49 in / 12.4 mmf 0.55 in / 14 mmg 0.83 in / 21 mmh 0.17 in / 4.2 mm
øe
a
b
øc ød
ød
øe
øh
f e c
g
øa
cdM8
øb
øa
M8
ef
øb
g
ConnectionDiagram
1 = Blue2 = Black3 = Brown
green yellow
/
/green yellow
/
/
Switching diagramfor sensor with PNP switching output for sensor with NPN switching output
www.shuntu.net 010-86879366(Beijing)
(Ref. 3.2/22-2, 3.4/10-1, 3.4/10-2) (98) Subject to change
Magnetically Actuated Proximity SensorsSockets with Cable for Sensors with M12 x 1 Threaded Plug
Sockets for proximity sensors, Type SMTO-6-...SMEO-8E and SMTO-8E-...-M12-...When using sockets with cable with integral LED for PNP sensors, make sure to specify (-PSL) versions.
Connector nutOperating status LED-Indicator yellowPower control LED-Indicator green Only for Type PSL3
2
1
i
øi
l
mn
øa
øa
i
i
j
k
Dimensions
a 0.17 in / 4.2 mmi 0.59 in / 15 mmj 1.14 in / 29 mmk 1.63 in / 41.5 mml 1.26 in / 32 mmm 0.47 in / 12 mmn 0.96 in / 24.4 mm
M12 x 1
Order Number
Part No. Type Cable Length Sensor
159428 SIM-M12-3GD-2.5-PU 7.6 ft / 2.5 m Socket for Sensors with 3 pin
159429 SIM-M12-3GD-5-PU 15.2 ft / 5 m threaded plug connection
159430 SIM-M12-3WD-2.5-PU 7.6 ft / 2.5 m
159431 SIM-M12-3WD-5-PU 15.2 ft / 5 m
159432 SIM-M12-3WD-2.5-PSL-PU 7.6 ft / 2.5 m ...for PNP Switching Output, normally
159433 SIM-M12-3WD-5-PSL-PU 15.2 ft / 5 m open function and LED
159434 SIM-M12-3WD-2.5-NSL-PU 7.6 ft / 2.5 m ...for NPN Switching Output, normally open
159435 SIM-M12-3WD-5-NSL-PU 15.2 ft / 5 m function and LED
Socket for sensors with 4 pin threaded
164259 SIM-M12-4GD-5-PU 15.2 ft / 5 m plug connection
164258 SIM-M12-4WD-5-PU 15.2 ft / 5 m
868
green yellow
green yellow
Switching diagramfor sensor with PNP switching output
for sensor with NPN switching output.
Sockets with cable for proximity sensors, Type SMTSO-6-... and SMTS-8E-...-M12...For use in welding installations with strong alternating magnetic fields.
Straight Connection 90° Angle ConnectionType SIM-M12-RS-3GD-3 Type SIM-M12-RS-3WD-3Part No. 30450 Part No. 30451
3-wire cable (3 x 0.5 mm2), 3 m longKnurled nut M12 x 12
1
Dimensions
f 0.98 in / 25 mmh 0.55 in / 14 mmi 0.20 in / 5.2 mmj 1.50 in / 38 mmk 1.22 in / 31 mml 0.53 in / 13.5 mm
www.shuntu.net 010-86879366(Beijing)
869Subject to change (Ref. 2.385.1) (7.92)
Magnetically Actuated Proximity SensorsDuo Cables for Sensors
Part Number Type Description18685 KM12-DUO-M8-GDGD DUO sensor cable (straight / straight)18688 KM12-DUO-M8-GDWD DUO sensor cable (straight / angle)18687 KM12-DUO-M8-WDWD DUO sensor cable (angle / angle)18684 KM12-M12-GSGD-2.5 DUO extension cable (8 ft / 2.5 m)18686 KM12-M12-GSGD-5.0 DUO extension cable (15 ft / 5 m)165610 KM8-M8-GSGD-2.5 DUO extension cable (8 ft / 2.5 m)165611 KM8-M8-GSGD-5.0 DUO extension cable (16 ft / 5 m)
DUO Cables
DUO Sensor Cables combine two M8 connectors into one M12connection.
DUO extension cable DUO sensor cable
www.shuntu.net 010-86879366(Beijing)
870 (Ref. 3.1/10-1) (97/98) Subject to change
Type SME-8-K-LED-243-wire cable 8.2 ft / 2.5 m length (3 x 0.14 mm2)Type SME-8-O-K-LED3-wire cable 24.6 ft / 7.5 m (3 x 0.14 mm2)Type SME-8-S-LED-243-wire cable 0.98 ft / 0.3 m length (3 x 0.14 mm2)Type SME-8-K-24-S62-wire cable 8.2 ft / 2.5 m length (2 x 0.14 mm2)Type SME-8-K-LED-2302-wire cable 8.2 ft / 2.5 m length (2 x 0.25 mm2)Yellow diode (LED)Max. tightening torque for SME-8-… is 2.7 in-lb / 0.3 Nm (1.3 mm internal hex)Suitable for socket Type SIM-M8-...4
3
2
1
Magnetically Actuated Proximity Sensors,Type SME-8For Cylinders with Sensor Groove
Order Number Part No. / Type 150855 152820 150857 160251 161756SME-8-K-LED-24 SME-8-K-LED-230 SME-8-S-LED-24 SME-8-O-K-LED-24 SME-8-K-24-S6
Sensor Tester 158481 SM-TEST-1
Medium Magnetic field and electric current
Design Reed switch, magnetically actuated
Mounting Slides into sensor groove on cylinder
Connection Molded Molded Molded 3-wire Molded Molded 3-wire cable 2-wire cable cable with plug 3-wire cable 2-wire cable
Maximum Switching Capacity 10W 2W 10W
Maximum Switching Current Max. 500 mA AC: 200 mA; DC: 120 mA Max. 500 mA Max. 50 mA Max 500 mA
Maximum Switching Voltage 12 to 27 V DC/AC 3 to 250 V DC/AC 12 to 27 V DC/AC 12 to 30 V DC/AC 0 to 30 V DC/AC
Resistance 0.13 Ω max. 0.15 Ω max. 0.13 Ω max. 0.1 Ω max. 0.09 Ω max.
Reproducible Switching Accuracy 0.0039 in / ± 0.1 mm
Maximum Switching Frequency Max 800 Hz Max. 500 Hz Max. 800 Hz Max. 500 Hz Max. 800 Hz
Type of Protection per DIN 40050 IP 67
Temperature Range Fixed wiring -4 to +140°F / -20 to +60°C -4 to +248°F /
Flexible wiring 23 to 140°F / -5 to +60°C -20 to +120°C
Material Housing: polymer, plate (steel); Cable: PVC; Plug: PUR Cable: PVC Cable: PUR
Weight 0.11 lbs / 0.050 kg 0.13 lbs / 0.060 kg 0.02 lbs / 0.010 kg 0.19 lbs / 0.085 kg 0.11 lbs / 0.050 kg
Electric Proximity Sensorswith built-in protective circuit and LEDWith integral cable:8.2 ft / 2.5 mType SME-8-K-LED-24With integral cable:0.98 ft / 0.3 m / plugType SME-8-S-LED-24
With integral cable:
Type SME-8-O-K-LED-24*With integral cable:8.2 ft / 2.5 m
Type SME-8-K-LED-230High temperature applications
Type SME-8-K-24-S6These proximity sensors are used for non-contact position indication on Festo “-A-” seriescylinders with sensor groove.
As a magnetic field approaches (e.g. thepermanent magnet on the piston of a cylinder),the sensor outputs an electrical signal. Theelectrical connections are molded into thehousing.
The sensor status is indicated by a yellow lightemitting diode (LED). When the sensor isactuated, the LED indicator is on. The sensor isprotected against reverse polarity.
Accessories: Socket with cable,Type SIM-M8-... see page 867.
*Normally closed contact function.
Dimensions
a 0.12 in / 3 mmb 1.04 in / 26.3 mmc 1.13 in / 28.8 mmd 0.25 in / 6.3 mme 0.20 in / 5 mmf 0.17 in / 4.3 mmg 1.42 in / 36 mmh 11.81 in / 300 mmi 0.80 in / 20.2 mmj 1.03 in / 26.2 mmk 0.13 in / 3.4 mml 0.25 in / 6.4 mmm 0.26 in / 6.7 mmn 0.39 in / 9.8 mm
e
f
d
b
c
a
BN
BUR
L
Color codeBN = brownBK = blackBU = blue
BN
BK A
BU
Type SME-8-K-LED-24SME-8-O-K-LED-24SME-8-K-24-S6 (without LED)
Type SME-8-S-LED-24
Type SME-8-K-LED-230
www.shuntu.net 010-86879366(Beijing)
with molded cable with plug
Type SMT-8-PS-K-LED-24SMT-8-NS-K-LED-24
Type SMT-8-PS-S-LED-24
SMT-8-NS-S-LED-24
Type SMT-8-…-K-LED-243-strand cable 2.5 m length (3 x 0.14 mm2)Type SMT-8-…-S-LED-243-strand cable 0.3 m length (3 x 0.14 mm2)
Yellow diode (LED)
Max. tightening torque for SMT-8-… is 1.8 in-lb / 0.2 Nm
(1.3 mm internal hex)
Suitable for plug type SIM-M84
3
2
1
Magnetically Actuated Proximity Sensors, Type SMT-8For Cylinders with Sensor Groove
871Subject to change (Ref. 3.1/10-2) (97/98)
Order Number Part No./Type PNP 150864 150865
Output SMT-8-PS-K-LED-24 SMT-8-PS-S-LED-24
NPN 150862 150863
Output SMT-8-NS-K-LED-24 SMT-8-NS-S-LED-24
Sensor Tester 158481 SM-TEST-1
Medium Magnetic field and electric current
Design Inductive, magnetically actuated
Mounting Slides into sensor groove on cylinder
Connection Molded 3-wire cable Molded 3-wire
cable with plug
Maximum Switching Capacity 3W
Maximum Switching Current Max. 100 mA
Maximum Switching Voltage 10 to 30 V (residual ripple 10% Eb)
Resistance 0.13 max.
Reproducible Switching Accuracy 0.008 in / ± 0.2 mm
Maximum Switching Frequency Max 1 kHz
Type of Protection per DIN 40050 IP 67
Temperature Range Fixed wiring -4 to +140°F / -20 to +60°C
Flexible wiring 32 to 140°F / 0 to +60°C
Material Housing: polymer, plate (steel); Cable: PVC; Plug: PUR
Weight 0.11 lbs / 0.050 kg 0.02 lbs / 0.010 kg
Inductive Proximity Sensorswith molded 3-wire cable (8.2 ft / 2.5 m)
Type SMT-8-PS-K-LED-24
with 3-wire cable (0.98 ft / 0.3 m) / plug
Type SMT-8-PS-S-LED-24
with molded 3-wire cable (8.2 ft / 2.5 m)
Type SMT-8-NS-K-LED-24
with 3-wire cable (1 ft / .3 m) / plug
Type SMT-8-NS-S-LED-24
These proximity sensors are used for non-contact position indication on Festo “A”series cylinders with sensor groove.
When the proximity sensor enters amagnetic field (e.g. the permanent magneton the piston of a cylinder), it outputs anelectrical signal. The electricalconnections are molded into the housing.
The sensor status is indicated by a yellowlight emitting diode (LED). When thesensor is actuated, the LED indicator ison. The sensor is protected againstreverse polarity.
Color codeBN = brownBK = blackBU = blue
Accessories: Socket with cable,Type SIM-M8-... see page 867.
Dimensions
a 0.20 in / 5 mm
b 0.17 in / 4.3 mm
c 0.25 in / 6.3 mm
d 1.04 in / 26.3 mm
e 1.13 in / 28.8 mm
f 0.12 in dia. / 3 mm dia.
g 11.81 in / 300 mm
h 1.24 in / 31.4 mm
www.shuntu.net 010-86879366(Beijing)
Pages 872 and 873 have been left blank intentionally.
www.shuntu.net 010-86879366(Beijing)
873Subject to change (Ref. 3.1/12-2) (97/98)
874 (Ref. 1.11-12) (00) Subject to change
Cylinder Proximity SwitchesMagnetically Activated Electrical Signal Generators
Proximity Sensorreed contact type, with yellow light emittingdiode and integral protective circuit
24 V, with plug connector
Type SMEO-8E-S-LED-24SMEO-8E-M12-LED-24
230V, with plug connector
Type SMEO-8E-M12-LED-230
230V, heat resistant (without LED), withintegral cable
Type SMEO-8E-K-S6
These proximity sensors are used for non-contact position indication with Festo -A design cylinders having sensor grooves.
The proximity switch emits an electric signal when a magnetic field (e.g., thepermanent magnet on the cylinder’s piston) approaches.
The switching status is indicated by a yellow light emitting diode. The switchesare not protected against incorrect polarity voltage connection, except for TypeSMEO-8E-K-S6.
AccessoriesMounting kit Type SMB-8E; see page 901.For cables with sockets, see pages 868.
Color codeBK = blackBN = brownBU = blue
Order Number Part No./Type 171163 171164 171160 171158SMEO-8E-S-LED-24 SMEO-8E-M12-LED-24 SMEO-8E-M12-LED-230 SMEO-8E-K-S6
Version Plug, M8 Plug, M12 Plug, M12, 230V Heat resistantType of Mounting Clamp in sensor groove, with mounting kit SMB-8EConnection 3-pin plug M8 3-pin plug M12 2-wire cable,
8.2 ft / 2.5 m longMax. Contact Fating 10 WMax. Switching Current 500 mASwitching Voltage DC 12 - 30 VDC 12 - 30 VDC 4 - 250 VDC 0 - 230 VDC
ACContact Resistance 0.09Ω 0.09Ω 0.15Ω 0.09ΩReproducible Switching Accuracy ± 0.004 in / 0.1 mmCE symbol per ** EMC Directive 89/336/EEC — X — —
EU Directive 73/23/EEC — — X XMax. Switching Frequency 800 Hz 800 Hz 500 Hz 500 HzDegree of Protection per EN 60529 IP 65/67Temperature Range –4 to +140°F / –20 to +60°C –4 to +248°F /
–20 to +120°CMaterials Plug: Brass, Housing: TPU Housing: TPU
chrome-plated; Cable: TPE-SHousing: TPU
Weight 0.020 lb / 0.009 kg 0.020 lb / 0.009 kg 0.020 lb / 0.009 kg 0.068 lb / 0.031 kg
** Rated operating voltage: 230 V AC/230 V DCOhmic load: AC12 (0.04 A AC)/DC12 (0.04 A AC)Inductive load: AC14 (0.024 A AC)/DC13 (0.04 A DC)
www.shuntu.net 010-86879366(Beijing)
875Subject to change (Ref. 1.11-19, 1.11-20) (00)
Magnetically Actuated Proximity SensorsDimensions, Type SMEO-8E-..., SMTO-8E-...
SMEO-8E-S-LED-24SMTO-8E-PS-S-LED-24SMTO-8E-NS-S-LED-24
Suitable for cable with socket Type SIM-M8-...Yellow LEDCheese head screw M3x25 per DIN 912, for securing to mounting kit Type SMB-8E; max. tightening torque 8.8 in-lb / 1 NmTheoretical switching pointMounting kit type SMB-8E (must be ordered separately)Installation space for 90° angled socketInstallation space for straight socket
SMEO-8E-M12-LED-24SMEO-8E-M12-LED-230SMTO-8E-PS-M12-LED-24SMTO-8E-NS-M12-LED-24
Suitable for cable with socket Type SIM-M12-...Yellow LEDCheese head screw M3x25 per DIN 912, for securing to mounting kit Type SMB-8E; max. tightening torque 8.8 in-lb / 1 NmTheoretical switching pointMounting kit Type SMB-8E (must be ordered separately)Installation space for 90° angled socketInstallation space for straight socket
SMEO-8E-K-S6
2-wire cable (2x0.14 mm2), 8.2 ft / 2.5 m longMounting kit Type SMB-8E (must be ordered separately)Cheese head screw M3x25 per DIN 912, for securing to mounting kit Type SMB-8E; max. tightening torque 8.8 in-lb / 1 Nm
3
2
1
7
6
5
4
3
2
1
7
6
5
4
3
2
1
Dimensions
a 1.10 in / 28 mm j 1.81 in / 46 mmb 0.79 in / 20 mm k 0.88 in / 22.5 mmc 0.16 in / 4 mm l 1.42 in / 36.1 mmd 0.76 in / 19.2 mm m 1.44 in / 36.5 mme 0.08 in / 2.2 mm n 2.32 in / 59 mmf 0.17 in / 4.4 mm o 0.85 in / 21.5 mmg 0.20 in / 5 mm p 0.12 in / 3 mmh 1.26 in / 32 mm q 0.45 in / 11.5 mmi 1.02 in / 26 mm r 0.69 in / 17.5 mm
www.shuntu.net 010-86879366(Beijing)
876 (Ref. 1.11-15) (00) Subject to change
Cylinder Proximity SwitchesMagnetically Activated Electrical Signal Generators
Proximity Sensorinductive circuit type, with yellow lightemitting diode and integral protectivecircuit
24 V, with plug connectorPNP output
Type SMTO-8E-PS -S-LED-24SMTO-8E-PS-M12-LED-24
NPN output
Type SMTO-8E-NS-M12-LED-24 These proximity sensors are used for non-contact position indication with Festo -A design cylinders having sensor grooves.
The proximity switch emits an electric signal when a magnetic field (e.g., thepermanent magnet on the cylinder’s piston) approaches.
The switching status is indicated by a yellow light emitting diode. The switchesare protected against incorrect polarity voltage connection.
AccessoriesMounting kit Type SMB-8E; see page 901.For cables with sockets, see pages 868.
Color codeBK = blackBN = brownBU = blue
Order Number PNP 171178 171179Part No./Type Output SMTO-8E-PS-S-LED-24 SMTO-8E-PS-M12-LED-24
NPN 171166 171176Output SMTO-8E-NS-S-LED-24 SMTO-8E-NS-M12-LED-24
Version Plug M8 Plug M12
Type of mounting Clamp in sensor groove, with mounting kit SMB-8E
Connection 3-pin plug M8 3-pin plug M12
Max. contact rating 3 W
Max. switching current 100 mA
Switching voltage 12 - 30 VDC (residual ripple 10%)
Switching output SMTO-8E-PS-...-24 : PNP
SMTO-8E-NS-...-24 : NPN
Reproducible switching accuracy ± 0.004 in / 0.1 mm
CE symbol Yes, per EU Directive 89/336/EEC governing EMC
Max. switching frequency 35 Hz
Degree of protection per EN 60529 IP 65/67
Temperature range -4 to +140°F / -20 to +60°C
Materials Housing: PET; Clamp piece: stainless steel; Cable: PUR
Weight 0.044 lb / 0.020 kg 0.088 lb / 0.040 kg
www.shuntu.net 010-86879366(Beijing)
Electrical Proximity SensorWith built-in protective circuit and LED.
Protected against interference from
welding operations.
PNP Circuitry
Type SMTSO-8E-PS-M12-LED-24
NPN Circuitry
Type SMTSO-8E-NS-M12-LED-24
These proximity sensors are used fornon-contact position indication on Festoseries cylinders with sensor groove.
When the proximity sensor enters a magnetic field (e.g. the permanentmagnet on the piston of a cylinder), itoutputs an electrical signal. The electricalconnections are molded into the housing.
The sensor status is indicated by a yellow light emitting diode (LED). Whenthe sensor is actuated, the LED indicatoris on. The sensor is protected againstreverse polarity.
Accessories:Cable with plug for proximity sensor withsocket. Connection: 90° angle connector(WD) or straight (GD).Order Number30450 SIM-M12-RS-3GD-330451 SIM-M12-RS-3WD-3For dimensions, see page 871.
Order Number Part No./Type 191986 175825
SMTSO-8E-PS-M12-LED-24 SMTSO-8E-NS-M12-LED-24
Sensor Tester 158481 SM-TEST-1
Medium Magnetic field and electric current
Design Magnetically actuated, moisture-proof
Mounting Mounting bracket, Type SMB-8E (order separately, p/n 178230)
Connection 3-pin plug connection, M12
Max. Switching Capacity max. 6 W @ 30 VDC
Max. Switching Current max. 200 mA
Max. Switching Voltage 10 to 30 V DC
CE - Approval Yes, per EMV-Regulation 89/336/EWG
Reproducible Switching Accuracy ±0.004 in / ±0.1 mm
Max. Switching Frequency max. 14 Hz
Degree of Protection IP 65/67
Temperature Range -13 to +158°F / -20 to +60°C
Materials Housing: PET; Clamp Piece; stainless steel; Cable; PUR
Weight 0.176 lb / 0.08 kg
Switching Output PNP NPN
877Subject to change (Ref 1.10-16) (01)
Magnetically Actuated Proximity SensorWeld Immune
Color codeBN = brownBU = blueBK = black
BN
BU
BK
+
-
RL
Yellow LED
Mounting bracket Type SMB-8E2
1
Proximity sensor Type SMTSO-8E-PS-M12-LED-24
SMTSO-8E-NS-M12-LED-24
1
Dimensions
a 0.98 in / 25 mm
b 0.67 in / 17 mm
c 0.92 in / 23.45 mm
d 0.85 in / 21.5 mm
e 0.10 in / 2.5 mm
f 0.19 in / 4.8 mm
g 0.69 in / 17.6 mm
h 1.10 in / 28 mm
i 0.18 in / 4.5 mm
j 0.17 in / 4.2 mm
k 0.39 in / 10 mm
l 0.55 in / 14 mm
m 0.31 in / 8 mm
n 0.63 in / 16 mm
o 0.45 in / 11.5 mm
p 0.59 in / 15 mm
Type SMTSO-8E-PS-M12-LED-24SMTSO-8E-NS-M12-LED-24
Type SMB-8E (order separately, p/n 178230)
BN
BU
BK R
+
-
L
www.shuntu.net 010-86879366(Beijing)
878
Order Number Vertical Cable 173210 SME-10-KL-LED-24 173212 SME-10-SL-LED-24Part No. / Type Horizontal Cable 173211 SME-10-KQ-LED-24 173213 SME-10-SQ-LED-24Medium Magnetic field and electric currentMounting Mounting in cylinders with sensor grooves
For round cylinder: with mounting bracket, Type SMBR-10-… Connection 3-wire cable PlugSwitching Capacity max. 1 WMax. Switching Current 80 mASwitching Voltage 12 to 27 V DCForward Resistance max. 0,1 ohmsReproducible Switching Accuracy ± 0.004 in / ± 0.1 mmSwitching Frequency max. 500 HzCE Approval Yes, per EMV-Regulation 89/336/EWGLevel of Protection Per DIN 60529 IP 65Temperature Range Movable Cable Layout -4 to +158°F / -20 to +70°C
Fixed Cable Layout 23 to 158°F / -5 to +70°CMaterials Housing: polypropylene; Cable: polyurethaneWeight – –
(Ref. 3.1/20-1) (97/98) Subject to change
Type SME-10-KL-LED-24 Type SME-10-KQ-LED-24
Type SME-10-SL-LED-24 Type SME-10-SQ-LED-24
These proximity sensors are designed for contactless position indication whenmounted on Festo cylinders with sensing capability. Installation on cylinderswith sensor groove is by means of friction fit in the sensor groove; for roundcylinders, mounting is by means of a mounting bracket, Type SMBR-10-... .
The sensor emits an electric signal when actuated by a magnetic field (e.g. thepermanent magnet on the cylinder piston).
Operating status is indicated by a yellow LED.
These sensors are “LABS-Free.” This means the valve is free from any type oflubricant that is damaging in paint applications, an example is silicone.
Magnetically Actuated Proximity Sensors, Type SME-10For Cylinders with Sensor Groove
24 Volt ElectricProximity Sensorswith switching status indication(2 yellow LEDs, for plus- or minus-switching)
with integral horizontal cableType SME-10-KL-LED-24
with integral vertical cableType SME-10-KQ-LED-24
with integral horizontal cable with plugType SME-10-SL-LED-24
with integral vertical cable with plugType SME-10-SQ-LED-24
Accessories:Mounting Bracket for round cylindersType SMBR-10-...Sockets
Color codeBN = brownBK = blackBU = blue
BN
BK
BU
RL
www.shuntu.net 010-86879366(Beijing)
Type B1 B2 B3 B4 H1in / mm in / mm in / mm in / mm in / mm
SMBR-10-6 0.61 / 15.6 0.37 / 9.4 0.28 / 7 0.53 / 13.5 0.53 / 13.5
SMBR-10-8 0.74 / 18.9 0.48 / 12.3 0.28 / 7 0.75 / 19 0.69 / 17.5
SMBR-10-10 0.80 / 20.4 0.54 / 13.7 0.28 / 7 0.75 / 19 0.78 / 19.9
SMBR-10-12 0.89 / 22.7 0.56 / 14.3 0.28 / 7 0.75 / 19 0.86 / 21.9
SMBR-10-16 1.03 / 26.1 0.67 / 17 0.28 / 7 0.75 / 19 1.01 / 25.7
SMBR-10-20 1.31 / 33.2 0.82 / 20.8 0.35 / 9 0.75 / 19 1.20 / 30.4
SMBR-10-25 1.44 / 36.5 0.89 / 22.6 0.35 / 9 0.75 / 19 1.40 / 35.6
SMBR-10-32 1.64 / 41.7 0.96 / 24.5 0.35 / 9 0.75 / 19 1.68 / 42.7
SMBR-10-40 1.85 / 47 1.04 / 26.5 0.35 / 9 0.75 / 19 2.00 / 50.7
SMBR-10-50 2.22 / 56.4 1.13 / 28.6 0.35 / 9 0.75 / 19 2.42 / 61.5
SMBR-10-63 2.73 / 69.4 1.25 / 32 0.35 / 9 0.75 / 19 2.93 / 74.5
1 3-wire cable (polyurethane) 8.2 ft / 2.5 m long (3 x 0.06 mm2)2 Theoretical switching point3 Setscrew M2 x 4 (DIN 913); Maximum torque 1.8 lb-in / 0.2 Nm4 Yellow LED (plus-switching)5 Yellow LED (minus-switching)
1 Proximity sensor Type SME-10-…2 Guide groove for sensor cable
1 Fitting for socket Type SIM-M8-…2 Theoretical switching point3 Setscrew M2 x 4 (DIN 913); Maximum torque 1.8 in-lb / 0.2 Nm4 Yellow LED (plus-switching)5 Yellow LED (minus-switching)
879Subject to change (Ref. 3.1/20-2) (97/98)
Magnetically Actuated Proximity Sensors,Type SME-10Dimensions
Type SME-10-KQ-LED-24 Type SME-10-KL-LED-24
Type SME-10-SQ-LED-24 Type SME-10-SL-LED-24
Type SMBR-10-…
Dimensions
a 0.10 in / 2.5 mmb 0.27 in / 6.8 mmc 0.79 in / 20 mmd 0.15 in / 3.7 mme 0.11 in / 2.9 mmf 0.17 in / 4.3 mmg 0.29 in / 7.3 mmh 0.43 in / 11 mmi 0.87 in / 22 mmj 1.42 in / 36 mmk 12.20 in / 310 mm
www.shuntu.net 010-86879366(Beijing)
880
Order Number Vertical Cable 173218 SMT-10-PS-KL-LED-24 173222 SMT-10-NS-KL-LED-24 173220 SMT-10-PS-SL-LED-24 173224 SMT-10-NS-SL-LED-24
Part No. / Type Horizontal Cable 173219 SMT-10-PS-KQ-LED-24 173223 SMT-10-NS-KQ-LED-24 173221 SMT-10-PS-SQ-LED-24 173225 SMT-10-NS-SQ-LED-24
Medium Magnetic field and electric currentMounting Mounting in cylinders with sensor groove
For round cylinder with mounting bracket, Type SMBR-10-… Connection 3-wire cable PlugSwitching Capacity max. 3 WMax. Switching Current 100 mASwitching Voltage 10 to 30 V Switching Output PNP NPN PNP NPNReproducible Switching Accuracy ± 0.008 in / ± 0.2 mmSwitching Frequency max. 2 kHzCE Approval Yes, per EMV-Regulation 89/336/EWGLevel of Protection Per DIN 60529 IP 65Temperature Range Movable Cable Layout -20 to +60°C
Fixed Cable Layout 0 to +60°CMaterials Housing: polypropylene; Cable: polyurethaneWeight – –
(Ref. 3.1/22-1) (97/98) Subject to change
Type SMT-10-PS-KL-LED-24 Type SMT-10-PS-KQ-LED-24SMT-10-NS-KL-LED-24 SMT-10-NS-KQ-LED-24
Type SMT-10-PS-SL-LED-24 Type SMT-10-PS-SQ-LED-24SMT-10-NS-SL-LED-24 SMT-10-NS-SQ-LED-24
These proximity sensors are designed for contactless position indication whenmounted on Festo cylinders with sensing capability. Installation on cylinderswith sensor groove is by means of friction fit in the sensor groove; for roundcylinders, mounting is by means of a mounting bracket, Type SMBR-10-... .
The sensor emits an electric signal when actuated by a magnetic field (e.g. thepermanent magnet on the cylinder piston).
Operating status is indicated by a yellow LED.
These sensors are “LABS-Free.” This means the valve is free from any type oflubricant that is damaging in paint applications, an example is silicone.
Magnetically Actuated Proximity Sensors, Type SMT-10For Cylinders with Sensor Groove
Inductive Proximity Sensorswith switching status indicationand protective circuit
PNP Outputwith integral horizontal cableType SMT-10-PS-KL-LED-24with integral vertical cableType SMT-10-PS-KQ-LED-24with integral horizontal cable with plugType SMT-10-PS-SL-LED-24with intregral vertical cable with plugType SMT-10-PS-SQ-LED-24
NPN Outputwith integral horizontal cableType SMT-10-NS-KL-LED-24with integral vertical cableType SMT-10-NS-KQ-LED-24with integral horizontal cable with plugType SMT-10-NS-SL-LED-24with intregral vertical cable with plugType SMT-10-NS-SQ-LED-24
Accessories:Mounting Bracket for round cylindersType SMBR-10-...SocketsSensor Tester, for testing and adjustingsensors
Color codeBN = brownBK = blackBU = blue
BN
BU
BK
RL
BN
BU
BK
RL
www.shuntu.net 010-86879366(Beijing)
Type B1 B2 B3 B4 H1in / mm in / mm in / mm in / mm in / mm
SMBR-10-6 0.61 / 15.6 0.37 / 9.4 0.28 / 7 0.53 / 13.5 0.53 / 13.5
SMBR-10-8 0.74 / 18.9 0.48 / 12.3 0.28 / 7 0.75 / 19 0.69 / 17.5
SMBR-10-10 0.80 / 20.4 0.54 / 13.7 0.28 / 7 0.75 / 19 0.78 / 19.9
SMBR-10-12 0.89 / 22.7 0.56 / 14.3 0.28 / 7 0.75 / 19 0.86 / 21.9
SMBR-10-16 1.03 / 26.1 0.67 / 17 0.28 / 7 0.75 / 19 1.01 / 25.7
SMBR-10-20 1.31 / 33.2 0.82 / 20.8 0.35 / 9 0.75 / 19 1.20 / 30.4
SMBR-10-25 1.44 / 36.5 0.89 / 22.6 0.35 / 9 0.75 / 19 1.40 / 35.6
SMBR-10-32 1.64 / 41.7 0.96 / 24.5 0.35 / 9 0.75 / 19 1.68 / 42.7
SMBR-10-40 1.85 / 47 1.04 / 26.5 0.35 / 9 0.75 / 19 2.00 / 50.7
SMBR-10-50 2.22 / 56.4 1.13 / 28.6 0.35 / 9 0.75 / 19 2.42 / 61.5
SMBR-10-63 2.73 / 69.4 1.25 / 32 0.35 / 9 0.75 / 19 2.93 / 74.5
1 3-wire cable (polyurethane) 8.2 ft / 2.5 m long (3 x 0.14 mm2)2 Yellow LED3 Theoretical switching point4 Setscrew M2 x 4 (DIN 913); Maximum torque 1.8 in-lb / 0.2 Nm
1 Proximity sensor Type SMT-10-…2 Guide groove for sensor cable
1 Fitting for socket Type SIM-M8-…2 Yellow LED3 Theoretical switching point4 Setscrew M2 x 4 (DIN 913);
Maximum torque 1.8 in-lb / 0.2 Nm
881Subject to change (Ref. 3.1/22-2) (97/98)
Magnetically Actuated Proximity Sensors, Type SMT-10Dimensions
Type SMT-10-PS-KQ-LED-24SMT-10-NS-KQ-LED-24
Type SMT-10-PS-KL-LED-24SMT-10-NS-KL-LED-24
Type SMT-10-PS-SQ-LED-24SMT-10-NS-SQ-LED-24
Type SMT-10-PS-SL-LED-24SMT-10-NS-SQ-LED-24
Type SMBR-10-…
Dimensions
a 0.10 in / 2.5 mmb 0.27 in / 6.8 mmc 0.79 in / 20 mmd 0.15 in / 3.7 mme 0.11 in / 2.9 mmf 0.17 in / 4.3 mmg 0.29 in / 7.3 mmh 0.43 in / 11 mmi 0.87 in / 22 mmj 1.42 in / 36 mmk 12.20 in / 310 mm
www.shuntu.net 010-86879366(Beijing)
Order Number Connection 12112 302913-Wire Cable SME-3-LED-24 SME-3-LED-24-K5
Part No./ Plug 150853 150854Type SME-3-SL-LED-24-B SME-3-SQ-LED-24-B
Medium Magnetic field and electric current
Design Normally open magnetically actuated electric reed switch
Mounting Clamps into dovetail groove on cylinder
Connection 3-Wire Cable 3-wire cable, 8.2 ft / 2.5 m long 3-wire cable, 16.4 ft / 5 m long
Plug In-line plug Lateral plug
Max. Switching Capacity 10 W
Max. Switching Current 500 mA
Switching Voltage 12 to 27 VDC and AC
Insulation Resistance 0.09 ohm
Reproducible Switching Accuracy ± 0.004 in / ± 0.1 mm
Switching Frequency 800 Hz
Switching Time 0.5 ms
Type of Protection per DIN 40050 IP 66
Temperature Range With Fixed Cable -4 to 140°F / -20 to +60°C
With Flexible Cable 23 to 140°F / -5 to +60°C
Materials Housing: Diecast magnesium; Cable: PVC
Weight Cable Design 0.088 lb / 0.040 kg 0.187 lb / 0.085 kgPlug Design 0.05 lb / 0.023 kg
Magnetically Actuated Proximity Sensors,Type SME-3Electrical Reed Switches, Dovetail Groove Design
882
Proximity SensorWith Protective Circuit and yellow LED
Type SME-3-LED-24With cable, 16.4 ft / 5 m
Type SME-3-LED-24-K5
With in-line Plug
Type SME-3-SL-LED-24-BWith Lateral Plug
Type SME-3-SQ-LED-24-BThese proximity sensors providenoncontact indication of piston positionfor FESTO “-A-” series cylinder withdovetail groove. They can also be used inother cases where a magnetic field isavailable to trigger a signal.
As a magnetic field approaches (e.g. thepermanent magnet on the piston of acylinder), the sensor outputs an electricsignal. The electrical connections aremolded into the housing with epoxy resin.
The operating status is indicated by alight-emitting diode. When the sensor isactuated the yellow LED indicator lights.The sensor is polarity protected and hasan integrated circuit to protect againstvoltage peaks.
Example: Dovetail proximity sensors, mounted onFESTO Type EZH cylinder.
Accessories:
Socket with cable for proximity sensor.
Type SIM-M8-...
(Ref. 3.3/10-1, 3.3/10-2) (97/98) Subject to change
1 Cable, 8.2 ft / 2.5 m long2 LED3 Max. torque = 8.8 in-lb / 1 Nm
(2 mm wrench)
Type SME-3-LED-24, SME-3-LED-24-K5
Type SME-3-SL-LED-24-B Type SME-3-SQ-LED-24-B
In-line LateralPlug Plug
Plug version:
M8 x 1 thread forsockets Type SIM-M8-...LEDMax. torque =8.8 in-lb / 1 Nm(2 mm wrench)Mounting space for90° angle socket
4
3
2
1
Dimensions
a 0.69 in / 17.6 mm f 0.38 in / 9.6 mm k 0.46 in / 11.8 mmb 0.48 in / 12.1 mm g 0.27 in / 6.8 mm l 0.54 in / 13.8 mmc 0.26 in / 6.5 mm h 0.50 in / 12.7 mm m 0.33 in / 8.5 mmd 1.02 in / 25.9 mm i 0.16 in / 4 mm o 0.12 in / 3 mme 0.76 in / 19.2 mm j 0.39 in / 9.8 mm
www.shuntu.net 010-86879366(Beijing)
Inductive Proximity SensorsWith yellow LED and protective circuit with
PNP CircuitryWith in-line cableType SMT-3-PS-KL-LED-24
With lateral cableType SMT-3-PS-KQ-LED-24
With in-line plugType SMT-3-PS-SL-LED-24-B
With lateral plugType SMT-3-PS-SQ-LED-24-B
NPN CircuitryWith in-line cableType SMT-3-NS-KL-LED-24
With lateral cableType SMT-3-NS-KQ-LED-24
With in-line plugType SMT-3-NS-SL-LED-24-B
With lateral plugType SMT-3-NS-SQ-LED-24-B
Color Coding:BN = BrownBK = BlackBU = Blue
These proximity sensors provide non-contacting position indication with FESTO“-A-” series cylinders with dovetailgroove.As a magnetic field approaches (e.g. thepermanent magnet on the piston of acylinder), the sensor outputs an electricalsignal. The signal is generated by amagnetic field (per-manent magnet)through the integrated circuitry inside thesensor.The electrical connections are moldedinto the housing with an epoxy resin.The sensor status is indicated by a lightemitt ing diode. When the sensor isactuated, the yellow LED indicator is on.The sensor is protected against reversepolarity.
Accessories:Socket with cable for proximity sensor,Type SIM-M8-...
Example: Dovetail proximity sensors, mounted onFESTO ‘EZH’ cylinder.
Magnetically Actuated Proximity Sensors, Type SMT-3Inductive Electronic Switches, Dovetail Groove Design
883Subject to change (Ref. 3.3/11-1, 11-2) (97/98)
Type SMT-3-...-KL-LED-24 Type SMT-3-...-KQ-LED-24In-line Cable Vertical Cable
3-wire cable, 8.2 ft / 2.5 m long
Type SMT-3-...-SL-LED-24-B Type SMT-3-...-SQ-LED-24-BIn-line Plug Vertical Plug
1
Order Number PNP Output 30976 31011 150868 150869SMT-3-PS- SMT-3-PS- SMT-3-PS- SMT-3-PS-KL-LED-24 KQ-LED-24 SL-LED-24-B SQ-LED-24-B
NPN Output 30977 31012 150866 150867SMT-3-NS- SMT-3-NS- SMT-3-NS- SMT-3-NS-
Part No./Type KL-LED-24 KQ-LED-24 SL-LED-24-B SQ-LED-24-BMedium Magnetic field and electric currentDesign Non-contact electrical proximity switchMounting Clamps into dovetail groove on cylinderConnection In-line cable Vertical cable In-line plug Vertical plugSwitching Voltage (Ub) 10 to 30 V DC
Residual Ripple 10% UbMax. Switching Current 200mAContact Rating 6 WReproducible Switching Accuracy ±0.0039 in / 0.1 mmSwitching Frequency 1 kHzSwitching Time PNP Output 0.4 / 2.7 msON/OFF NPN Output 1.5 / 0.8 msType of Protection per DIN 40050 IP 67 (DIN 40050)Temperature Range –13 to +158°F / –25 to +70°CMaterial Housing: Die-cast zinc; Cable: PVCWeight 0.386 lb / 0.175 kg 0.220 lb / 0.100 kg
Dimensions
a 0.73 in / 18.5 mm f 0.20 in / 5 mm j 0.28 in / 7 mmb 0.02 in / 0.5 mm g 0.57 in / 14.5 mm k 0.16 in / 4 mmc 1.02 in / 26 mm h 0.56 in / 14.3 mm l 1.38 in / 35 mmd 0.12 in / 3 mm i 0.46 in / 11.8 mm m 0.93 in / 23.5 mme 0.32 in / 8.25 mm
Yellow LEDMax. torque =6.7 in-lb0.7 NmSwitching pointColor coding PNP-grayNPN-black
5
4
3
2
www.shuntu.net 010-86879366(Beijing)
Order Number Part No./Type 164595 15709 150849SMEO-4-K-LED-24-B SMEO-4-K-LED-230 SMEO-4-S-LED-24-B
Medium Magnetic field and electric currentDesign Heat resistant (T60)Mounting With mounting bracket Type SMBR-... on cylinderConnection 3-wire cable 2-wire cable Socket connectorSwitching Capacity Max. 10 WMax. Switching Current 500 mASwitching Voltage DC and AC 12 to 27 V AC/DC 12 to 250 V AC/DC 12 to 27 V AC/DC
Insulation Resistance 0.09 ohms max.Reproducible Switching Accuracy ±0.0039 in / 0.1 mmSwitching Frequency Max. 8000 HzSwitching Time 2 msType of Protection IP 67 (DIN 40050)Temperature Range -4 to +140°F / -20 to +60°CMaterial Housing, Cover: Polymer; Cable: PVCWeight 0.165 lb / 0.075 kg 0.154 lbs / 0.070 kg 0.445 lbs / 0.020 kg
Magnetically Actuated Proximity Sensors,Type SMEO/SMTOElectrical and Inductive Sensors for ESNU/DSNU ISO Cylinders
884 (Ref. 1.364, 1.366-1) (1.97, 6.95) Subject to change
These proximity sensor are used for non-contact position indication for Festocylinders, Types ESNU and DSNU.
When a magnetic field approaches thesensor (e.g. the permanent magnet onthe piston of a cylinder), it outputs anelectrical signal.
The electrical connections are moldedinto the housing with an epoxy resin.
The sensing status is indicated by a lightemmiting diode. When the sensor isactuated, the yellow LED indicator is on.The sensor is protected against reversepolarity.
Electrical Proximity SensorActivated by Permanent Magnet
With yellow LED and Protective Circuitwithout Mounting bracket
With Integral CableType SMEO-4-K-LED-24-BWith PlugType SMEO-4-S-LED-24-B
With Integral CableType SMEO-4-K-LED-230
Inductive Proximity SensorActivated by Permanent Magnet withyellow LED and Protective Circuitwithout Mounting bracket
With Integral Cable
Type SMTO-4-PS-K-LED-24
Type SMTO-4-NS-K-LED-24
With PlugType SMTO-4-PS-S-LED-24-B
Type SMTO-4-NS-S-LED-24-B
Color Coding:BN = BrownBK = BlackBU = Blue
Color Coding:BN = BrownBK = BlackBU = Blue
Order Number Part No./Type 30471 30472 150861 150860SMTO-4-PS-K- SMTO-4-NS-K- SMTO-4-PS-S- SMTO-4-NS-S-LED-24 LED-24 LED-24-B LED-24-B
Medium Magnetic field and electric currentDesign Electronic non-contact proximity switch, inductiveMounting With mounting bracket, Type SMBR-... on cylinderConnection 3-wire cable, 8.2 ft / 2.5 mm Plug connectorSwitching Capacity 6WMax. Switching Current 200 mASwitching Voltage (Eb) 10 to 30 V
Residual Ripple 10%
Switching Output PNP NPN PNP NPNReproducible Switching Accuracy ±0.04 in / 0.1 mmSwitching Frequency Max. 1 kHzType of Protection per DIN 40050 IP 67Temperature Range -4 to +158°F / -20 to +70°CMaterial Cover: Plastic; Housing: Diecast Zinc, molded in epoxy resin; Cable: PVC
Weight 0.196 lb / 0.089 kg 0.075 lb / 0.034 kg
R1
_+
BUBN
BK
R1
_+
BUBN
BK
R1
_+
BUBN
BK
R1
_+
BUBN
BK
Accessories:Mounting Bracket, Type SMBR-...For the appropriate cylinder type (see page 865).
Socket with cable, for proximity sensor with plug:(see page 867)
SMBR-...
With Socket
With Cable
With Socket
With Cable
www.shuntu.net 010-86879366(Beijing)
1 Yellow LED2 Switching point3 M8 x 1 (For socket Type SIM-M80...) thread6 3-wire cable 8.2 ft / 2.5 m long1 Yellow LED
2 Switching point5 3-wire cable 8.2 ft / 2.5 m long (3 x 0.25 mm2)
1 3-wire cable 8.2 ft / 2.5 m long (3 x 0.25 mm2)2 Yellow operating status indicator3 Clamping range
2 Yellow operating status indicator3 Clamping range4 3-prong plug for
socket Type SIM-M8-3…/SIM-K-…6 Mounting space for 90° angle socket
Mounting Bracket/Cylinder Bore Reference
885Subject to change (Ref. 1.364) (1.97) (Ref. 1.366-2) (6.95)
Magnetically Actuated Proximity Sensors, Type SMEO/SMTODimensions and Accessories
Type SMEO-4-K-LED-230
See page 74 for sockets, Type SIM-M8-...
Type SMEO-4-K-LED-24B Type SMEO-4-S-LED-24B
Mounting BracketsType SMBR-8 Type SMBR-10 Type SMBR-12
19272 19273 19274
Type SMBR-16 Type SMBR-20 Type SMBR-2519275 19276 19277
SMBR-8 SMBR-10 SMBR-125/16" / 8 mm 3/8" / 10 mm 1/2" / 12 mmSMBR-16 SMBR-20 SMBR-255/8" / 16 mm 3/4" / 20 mm 1" / 25 mm
q
r
p
s
t
qr
p
u
x
yz
w
cc
aa
dd
bb
cc
gg
hh
eeff
kk
llii
s
jj
nn
oommjj
ss
ttrr
Type SMTO-4-PS-K-LED-24SMTO-4-NS-K-LED-24
Type SMTO-4-PS-S-LED-24-BSMTO-4-NS-S-LED-24-B
Dimensions
a 0.35 in / 9 mmb 0.43 in / 10.8 mmc 1.09 in / 27.8 mmd 1.21 in / 30.8 mme 0.17 in / 4.2 mmf 0.24 in / 6 mmg 0.37 in / 9.4 mmh 1.46 in / 37 mmi 0.98 in / 24.8 mmj 0.74 in / 18.7 mmk 1.36 in / 34.5 mml 1.04 in / 26.5 mm
m 1.85 in / 47 mmn 0.02 in / 0.5 mmo 0.04 in / 1 mmp 1.38 in / 35 mmq 0.49 in / 12.5 mmr 0.20 in / 5 mms 0.16 in / 4 mmt 1.97 in / 50 mmu 1.61 in / 41 mmv 0.39 in / 10 mmw 0.91 in / 23.2 mmx 0.65 in / 16.6 mm
y 0.55 in / 13.9 mmz 0.83 in / 21 mmaa 1.02 in / 25.9 mmbb 0.72 in / 18.2 mmcc 0.87 in / 22 mmdd 0.54 in / 13.8 mmee 1.13 in / 28.6 mmff 0.79 in / 20 mmgg 0.40 in / 10.2 mmhh 0.16 in / 4.1 mmii 1.31 in / 33.2 mmjj 0.89 in / 22.5 mm
kk 0.88 in / 22.3 mmll 1.58 in / 40.2 mmmm 1.39 in / 35.25 mmnn 1.04 in / 26.5 mmoo 0.55 in / 14 mmpp 0.22 in / 5.6 mmqq 1.58 in / 40.2 mmrr 0.98 in / 25 mmss 1.24 in / 31.5 mmtt 0.63 in / 16 mm
b
a
c
d
e
f
g
g
m
l
a
b
c
k
hi
ja
a
e
www.shuntu.net 010-86879366(Beijing)
Magnetically Actuated Proximity Sensor, Type CRSMEOElectrical sensor, corrosion and acid resistant, for Type CR... cylinders
886 (Ref.3.2/15-1)(98) Subject to change
Order code Part No./Type 161775 CRSMEO-4-K-LED-24Sensor Tester 158481 SM-TEST-1
Medium Magnetic field and electrical currentDesign Normally open electric switch, electrically actuatedMounting With mounting bracket CRSMB-… or CRSMBR-…Connection 3-wire cableMax. Switching Capacity 10 WMax. Switching Current 500 mASwitching Voltage 12 to 30 V DC or ACConductive Resistance max. 90 mΩReproducible Switching Accuracy 0.1 mmMax. Switching Frequency 800 HzDegree of Protection per DIN 40050 IP 67Temperature Range fixed cable –4 to +140°F / –20 to +60°C
flexible cable –4 to +140°F / –20 to +60°C Material Housing: PP; Cable: TPE-OWeight 0.165lb / 0.075 kg
Electrical Proximity Sensorwith yellow LED and protective circuit
Type CRSMEO-4-K-LED-24
Note:The housing material and cable areapproved for use in the food industry inaccordance with US FDA and GermanBGA (category 3) regulations.
The sensor is free of substances that couldinterfere with the drying of paint or varnish.
Accessories:Mounting bracket (see next page)Type CRSMB-…
CRSMBR-…
For sensor tester for testing and adjust-ment of sensors and proximity switches,see page 912.
This proximity sensor is designed specifically for position indication with Festocylinders type CRDNG, CRDNGS, CRDSNU, CRDSW and CRDG.
When a magnetic field approaches the sensors (e.g. the permanent magneton the piston of a cylinder), it outputs an electrical signal.
The operating status is indicated by a light emitting diode. When the sensoris actuated, the yellow LED indicator is on. The sensor is protected againstreverse polarity.
a
b
c
d
Color codeBK = blackBN = brownBL = blue
3-wire cable, 8.2 ft / 2.5 m long (3 x 0.25 mm2)Operating status indicator (yellow LED)Sensing area3
2
1
Dimensions
a 0.37 in / 9.4 mmb 0.42 in / 10.8 mmc 1.09 in / 27.8 mmd 0.16 in / 4.2 mm
www.shuntu.net 010-86879366(Beijing)
Magnetically Actuated Proximity SensorAccessories, Corrosion and Acid Resistant
887Subject to change (Ref.3.2/15-2)(98)
Mounting Bracketcorrosion and acid resistant
Type CRSMB-…for pneumatic cylindersType CRDNG and CRDNGS
Order Number for cylinder Material DimensionsType CRDSNU, CRDSW and in / mm
Part No. Type CRDG with Bore Ø B1 B2 H1 H2 H3164581 CRSMBR-12 12 PP with 0.87 / 22 0.16 / 4.1 1.13 / 28.6 0.79 / 20 0.40 / 10.2164582 CRSMBR-16 16 stainless 0.88 / 22.3 0.16 / 4 1.31 / 33.2 0.88 / 22.5 0.49 / 12.4164583 CRSMBR-20 20
steel 1.04 / 26.5 0.22 / 5.6 1.39 / 35.25 0.88 / 22.5 0.55 / 14
164584 CRSMBR-25 25thread
1.24 / 31.5 0.29 / 7.4 1.58 / 40.2 0.98 / 25 0.63 / 16163888 CRSMBR-32 32
insert
1.52 / 38.6 0.31 / 7.9 1.88 / 47.8 1.14 / 29 0.77 / 19.7163889 CRSMBR-40 40 1.83 / 46.6 0.32 / 8.1 2.20 / 55.8 1.30 / 33 0.94 / 23.8163890 CRSMBR-50 50 2.26 / 57.4 0.32 / 8.2 2.64 / 67.2 1.53 / 39 1.16 / 29.5163891 CRSMBR-63 63 2.77 / 70.4 0.32 / 8.2 3.18 / 80.8 1.81 / 45.9 1.42 / 36.2
Order Number for cylinders Material DimensionsType CRDNG in / mm
Part No. Type and CRDNGS with Bore Ø B1 H1161763 CRSMB-32 32 Stainless 1.14 / 29 0.69 / 17.6161764 CRSMB-40 40 steel 1.14 / 29 0.59 / 15.1161765 CRSMB-50 50 1.22 / 31.1 0.68 / 17.4161766 CRSMB-63 63 1.22 / 31.1 0.71 / 18.1161767 CRSMB-80 80 1.30 / 33 0.95 / 24.2161768 CRSMB-100 100 1.30 / 33 1.08 / 27.5
a
Mounting Bracketcorrosion and acid resistant
Type CRSMBR-…for pneumatic cylindersType CRDSNU, CRDSW AND CRDG
b
Dimensionsa 0.04 in / 11 mm
Dimensionsb 0.03 in / 10 mm
www.shuntu.net 010-86879366(Beijing)
888
Order Number Part No./Type 36198 150011 151526SMEO-4U-K-LED-24 SMEO-4U-K-LED-230 SMEO-4U-S-LED-24-B
Medium Magnetic field and electric currentDesign Normally open electrical switch, magnetically actuatedMounting With mounting bracket, Type SMBR-... to cylinderConnection 3-wire cable 2-wire cable Plug connectionSwitching Capacity Max. 10WSwitching Current Max. 500 mASwitching Voltage 12 to 27 V DC, AC 12 to 250 V DC, AC 12 to 27 V DC, ACConductance 0.09 Ω max. 0.15 Ω max. 0.09 Ω max.Reproducible Switching Accuracy ±0.007 in / ±0.1 mmSwitching Frequency Max. 800HzRated Voltage — 230V AC / 230V DC —Rated Current Resistive load
—0.4A at 230V AC or DC
—Inductive load 0.024A at 230V AC or DC
CE-Registration Yes, per EMV Regulation Yes, per EU Directive Yes, per EMV Regulation89/336/EWG 72/23/EWG and EMV 89/336/EWG
Regulation 89/336/EWGType of Protection per DIN 40050 (DIN VDE 470) IP 67Temperature Range Fixed wiring -13 to +158°F / -25 to +70°C
Flexible wiring 23 to 158°F / -5 to +70°CMaterial Housing Cover: Polymer; Cable: PVCWeight 0.154 lb / 0.070 kg 0.154 lb / 0.070 kg 0.022 lb / 0.010 kg
Type SMEO-4U-K-LED-24SMEO-4U-K-LED-230
Type SMEO-4U-S-LED-24-B
Proximity SensorWith yellow LED and protective circuit.Without mounting kit, with cable attached:Type SMEO-4U-K-LED-24
With plug connection:
Type SMEO-4U-S-LED-24-B
230 V sensor:With cable attached:Type SMEO-4U-K-LED-230
Accessories:SocketsType SIM-M8-... see page 867.Mounting BracketType SMBR-... see page 865.
Sensor Tester158481 SM-TEST-1The sensor tester is used for checking thefunctioning of proximity sensors. The sen-sor may be tested on its own or attachedto the cylinder.
Color code: BN = brown BK = black BU = blue
Magnetically Actuated Proximity Sensors, Type SMEO-4UElectrical Sensors for ESNU / DSNU ISO Cylinders
(Ref. 1.2/20-1) (97/98) Subject to change
Dimensions: see page 890.
These proximity sensors are used for non-contact position sensing for Festocylinders, Types ESNU and DSNU. The U-shaped connector permits side-by-side mounting with a minimum 0.32 in / 8 mm cylinder stroke length.
When the proximity sensor enters a magnetic field (e.g., the permanent magneton the piston of a cylinder), it outputs an electrical signal.
The sensing status is indicated by a light emitting diode. When actuated, theyellow LED indicator is on. The sensor is protected against reverse polarity.
BNBN
BK
BU
+ ( – )
– ( + )
BN
BK
BU+ ( – )
– ( + )
BNBN
BK
~ ( + )
~ ( – )
www.shuntu.net 010-86879366(Beijing)
Magnetically Actuated Proximity Sensors, Type SMTO-4UInductive Sensors for ESNU / DSNU ISO Cylinders
889Subject to change (Ref. 3.2/11-1) (97/98)
Inductive Proximity SensorsWith yellow LED and protective circuit.Without mounting kit:
PNP circuitry:
With cable attached:Type SMTO-4U-PS-K-LED-24With plug:Type SMTO-4U-PS-S-LED-24
NPN circuitry:
With cable attached:Type SMTO-4U-NS-K-LED-24With plug:Type SMTO-4U-NS-S-LED-24
Accessories:Sockets, Type SIM-M8-... see page 867.Mounting bracket, Type SMBR-... see page 865.
Color codeBN = brownBK = blackBU = blue
Type SMTO-4U-PS-K-LED-24SMTO-4U-NS-K-LED-24
Type SMTO-4U-PS-S-LED-24SMTO-4U-NS-S-LED-24
Order Number Part No./Type 152836 152837 152742 152743SMTO-4U-PS-K-LED-24 SMTO-4U-NS-K-LED-24 SMTO-4U-PS-S-LED-24 SMTO-4U-NS-S-LED-24
Medium Magnetic field and electric currentDesign Electronic, contactless proximity sensorMounting With mounting bracket, Type SMBR-... to cylinderConnection 3-wire cable 8.2 ft. / 2.5 m long Plug connection M8 x 1Switching Capacity Max. 6 WSwitching Current Max. 200 mASwitching Voltage (Vop) 10 to 30 V DC, ACResidual Ripple 10% VopSwitching Output PNP NPN PNP NPNReproducible Switching Accuracy ±0.007 in / ±0.1 mmSwitching Frequency Max. 1 kHzType of Protection per DIN 40050 IP 67 Temperature Range Fixed wiring: -4 to +158°F / -20 to +70°C — Flexible wiring: 23 to 158°F / -5 to +70°CMaterials Cap: Plastic; Housing: Die-cast Zinc, Coated with epoxy resin; Cable: PVCWeights 0.165 lb / 0.075 kg 0.042 lb / 0.019 kg
These proximity sensors are used for non-contact position indication for Festocylinders, Types ESNU and DSNU. The U-shaped connector permits side-by-sidemounting with a minimum 0.32 in / 8 mm cylinder stroke length.
When the proximity sensor enters a magnetic field (e.g., the permanent magnet onthe piston of a cylinder), it outputs an electrical signal.
The sensing status is indicated by a light emitting diode. When actuated, the yel-low LED indicator is on. The sensor is protected against reverse polarity.
Sensor Tester158481 SM-TEST-1The sensor tester is used for checking the functioning of proximity sensors. (Seepage 912)
RL
_
+BN
BU
BK
RL
_+
BU
BN
BK
www.shuntu.net 010-86879366(Beijing)
890
Type SMEO-4U-K-LED-24SMEO-4U-K-LED-230SMTO-4U-PS-K-LED-24SMTO-4U-NS-K-LED-24
Type SMEO-4U-S-LED-24-BSMTO-4U-PS-S-LED-24SMTO-4U-NS-S-LED-24
Mounting Kits
Type SMBR-8 Type SMBR-10 Type SMBR-1219272 19273 19274
Type SMBR-16 Type SMBR-20 Type SMBR-2519275 19276 19277
Magnetically Actuated Proximity SensorsDimensions, SMEO-4U-... / SMTO-4U-... and Accessories
(Ref. 3.2/10-2, 3.2/11-2) (97/98) Subject to change
Dimensions
a 0.61 in / 15.5 mmb 0.90 in / 23 mm n 0.83 in / 21 mm z 0.49 in / 12.4 mmc 0.75 in / 19 mm o 0.35 in / 9 mm aa 0.15 in / 4 mmd 0.35 in / 9 mm dia. p 0.87 in / 22 mm bb 1.04 in / 26.5 mme 0.16 in / 4.2 mm dia. q 0.54 in / 13.8 mm cc 1.38 in / 35.25 mmf 0.39 in / 10 mm dia. r 0.02 in / 0.5 mm dd 0.55 in / 14 mmg 0.87 in / 22 mm s 1.12 in / 28.6 mm ee 0.22 in / 5.6 mmh 1.34 in / 34 mm t 0.79 in / 20 mm ff 1.24 in / 31.5 mmi 0.83 in / 21 mm u 0.40 in / 10.2 mm gg 1.58 in / 40.2 mmj 0.39 in / 10 mm v 0.15 in / 4.1 mm hh 0.98 in / 25 mmk 0.91 in / 23.2 mm w 0.88 in / 22.4 mm ii 0.63 in / 16 mml 0.65 in / 16.6 mm x 1.31 in / 33.2 mm jj 0.28 in / 7.4 mmm 0.55 in / 13.9 mm y 0.88 in / 22.4 mm kk 1.02 in / 25.9 mm
3-wire cable 8.2 ft / 2.5 m long2-wire cable 8.2 ft / 2.5 m long with Type SMEO-4U-K-LED-230
Yellow status indicator LED
M8 x 1 thread for Type SIM-M8-... socket
Mounting space available for socket with 90° angle
www.shuntu.net 010-86879366(Beijing)
SMEO-1-B SMEO-1-LED-24-B
These proximity sensors are used for non-contact position sensing on FESTO“-A-” series cylinders. They can also be used in other cases where a magneticfield is available to trigger a signal.
As a magnetic field approaches (e.g. permanent magnet on the piston of thecylinder), the sensor emits an electrical signal. The electrical connections aremolded into the sensor.
In the case of Type SMEO-1-LED-..., sensing status is indicated by LED.
Magnetically Actuated Proximity Sensors,Type SMEO-1Electrical Reed Switch
891Subject to change (Ref. 3.2/20-1) (97/98)
Order Number Part No./Type 30457 30459 151673 151671(with 8 ft / 2.5 m cable) SMEO-1-B SMEO-1-LED-24-B SMEO-1-S6-C SMEO-1-LED-230-B
Part No./Type 151672 160998(with 16 ft / 5 m cable) SMEO-1-LED-24-K5-B SMEO-1-LED-230-K5-B
Sensor Tester 158481 SM-TEST-1
Medium Magnetic field and electrical current
Design Normally open reed switch, magnetically activated
Mounting Mounts to cylinders with a mounting bracketMax. Switching Capacity 40 W/VA 27 W/VA 40 W/VAMax. Switching Current 1.0 A 0.5 AMax. Switching Voltage 0 to 200 V DC 12 to 27 V DC 5 to 200 V DC
0 to 250 V AC 12 to 27 V AC 5 to 250 V AC
Resistance 90 mΩReproducible Switching Accuracy ±0.0039 in / ±0.1 mm
Switching Frequency Max. 500 Hz
Switching Time ≤ 0.5 ms
Type of Protection per DIN 40050 (DIN VDE 472) IP 67
Temperature Range Fixed wiring -4 to +158°F / -20 to +70°C 14 to 248°F / -10 to 120°C -4 to +158°F / -20 to +70°C
Flexible wiring 23 to 158°F / -5 to +70°C 23 to 248°F / -5 to +120°C 23 to 158°F / -5 to +70°C
Materials Housing: Die-cast zinc, polyamide; Reed switch: moulded in epoxy resin; cable: PVC
Weights With 8 ft / 2.5 m cable 0.231 lb / 0.105 kg 0.287 lb / 0.130 kg
With 16 ft / 5 m cable – 0.419 lb / 0.190 kg – 0.419 lb / 0.190 kg
Proximity SensorWithout mounting bracket
Type SMEO-1-B
Heat resistant designType SMEO-1-S6-C
With yellow LED:
Type SMEO-1-LED-24-B
With integral 16.4 ft. / 5 m cable
Type SMEO-1-LED-24-K5-B
With integral 8.2 ft. / 2.5 m cable
Type SMEO-1-LED-230-BType SMEO-1-LED-230-K5-B
Color codeBN = brownBK = blackBU = blue Dimensions
a 0.63 in / 16 mmb 0.55 in / 14 mmc 1.34 in / 34 mmd 0.67 in / 17 mm
e 0.16 in / 4 mmf 0.61 in / 15.5 mmg 0.33 in / 8.5 mm
Type SMEO-1-BSMEO-1-LED-230-BSMEO-1-LED-230-K5-BSMEO-1-S6-C
2-wire cable, (2 x 0.34 mm2)
Type SMEO-1-LED-24-BSMEO-1-LED-24-K5-B
3-wire cable, (3 x 0.25 mm2)
Yellow LED2
1
Accessories:Mounting bracketsSensor tester, Type SM-TEST-1
a b
cd
f
g
Øe
M4
www.shuntu.net 010-86879366(Beijing)
Magnetically Actuated Proximity Sensors, Type SMEO-1-SElectrical Reed Switch
892 (Ref. 3.2/20-2) (97/98) Subject to change
Order Number Part No./Type 150847 150848SMEO-1-S-24-B SMEO-1-S-LED-24-B
Sensor Tester 158481 SM-TEST-1Medium Magnetic field and electrical currentDesign Electric signal generator for contactless position, magnetically actuatedMounting Mounts to cylinder with a mounting bracketConnection Plug connectionMax. Switching Capacity 30 W/VA 27 W/VAMax. Switching Current 1.0 AMax. Switching Voltage 0 to 30 V DC/AC 12 to 27 V DC/ACMax. Resistance 90 mΩReproducible Switching Accuracy ±0.0039 in / ±0.1 mmSwitching Frequency Max. 500 HzSwitching Time ≤ 0.5 msType of Protection per DIN 40050 (DIN VDE 470) IP 67Temperature Range -4 to +158°F / -20 to +70°CMaterials Housing: Die-cast zinc; Reed switch: molded in epoxy resinWeights 0.099 lb / 0.045 kg 0.176 lb / 0.080 kg
SMEO-1-S-24-B SMEO-1-S-LED-24-B
These proximity sensors are used for non-contact position sensing with FESTO“A” series cylinders. They can also be used in other cases where a magneticfield is available to trigger a signal.
On approaching a magnetic field (e.g. permanent magnet on the piston of thecylinder), the proximity sensor emits an electrical signal. The electricalconnections are molded into the sensor.
With Type SMEO-1-S-LED-24-B, the sensing state is indicated by a lightemitting diode. The yellow LED indicator lights up upon activation. The sensor ispolarity safe and has a built in protective circuit against inductive switch-offpeaks.
Proximity SensorWithout mounting bracket
With plug:
Type SMEO-1-S-24-B
With plug and yellow LED:
Type SMEO-1-S-LED-24-B
Color codeBN = brownBK = blackBU = blue
Accessories:Sockets, Type SIM-M8-... see page 867.
For an overview of Festo mountingbrackets for proximity sensors seepage 865.
Sensor tester, Type SM-TEST-1
Light emitting diode yellowSuitable for plug, Type SIM-M8-...Mounting space for socket, with 90° angle3
2
1
a
b c
d
e
f
g
h
i
1
2
3
3
M4
Dimensions
a 1.67 in / 42.3 mmb 0.63 in / 16 mmc 0.55 in / 14 mmd 1.34 in / 34 mm e 1.28 in / 32.5 mmf 2.15 in / 54.5 mmg 0.61 in / 15.5 mmh 0.33 in / 8.5 mmi 0.67 in / 17 mm
www.shuntu.net 010-86879366(Beijing)
893
Inductive Proximity SensorsWith yellow LED, protective circuit andintegral cable, without mounting bracket
PNP Circuitry:
With integral cable
Type SMTO-1-PS-K-LED-24-C
With plug connectionType SMTO-1-PS-S-LED-24-C
NPN Circuitry:
With integral cable Type SMTO-1-NS-K-LED-24-C
With plug connectionType SMTO-1-NS-S-LED-24-C
Accessories:Socket with cable, Type SIM-M8-... see page 867.
For an overview of Festo mounting bracketsfor proximity sensors, see page 865.
Sensor Tester, Type SM-TEST-1 158481
See page 912.
Color codeBN = brownBK = blackBU = blue
Subject to change (Ref. 3.2/21-1, 3.2/21-2) (97/98)
Magnetically Actuated Proximity Sensors, Type SMTO-1Inductive Sensor
1 3-wire cable, 8.2 ft / 2.5 m long (3 x 0.25 mm2)
2 Light emitting yellow diode 3 Accepts socket Type SIM-M8-...4 Mounting space required for 90° angle socket.
When the proximity sensor enters a magnetic field (e.g. the permanent mag-net on the piston of a cylinder), it outputs an electrical signal. The signal isgenerated by a magnetic field (permanent magnet) through the integrated cir-cuitry inside the sensor.
The electrical connections are molded into the housing with an epoxy resin.
The sensing status is indicated by a light emitting diode. When the sensor isactuated, the yellow LED indicator is on. The sensor is protected againstreverse polarity. These proximity sensors are used for non-contacting positionindication with Festo “A” series cylinders. These proximity sensors are usedfor non-contact position indication and in other applications where a magneticfield is available to trigger a signal.
Dimensions
a 1.67 in / 42.3 mmb 0.63 in / 16 mmc 0.55 in / 14 mmd 0.67 in / 17 mm e 1.28 in / 32.5 mmf 2.15 in / 54.5 mmg 0.61 in / 15.5 mmh 0.33 in / 8.5 mmi 0.16 in / 4 mmj 1.34 in / 34 mm
BN
BU
BK R1
—
+
RL
_
+BN
BU
BK
Order Number Part No./Type 151683 151684 151685 151686SMTO-1-PS-K-LED-24-C SMTO-1-NS-K-LED-24-C SMTO-1-PS-S-LED-24-C SMTO-1-NS-S-LED-24-C
Sensor Tester 158481 SM-TEST-1Medium Magnetic field and electric currentDesign Electronic, non-contact proximity switchMounting With mounting bracket on mounting rod or DUO railConnection 3-wire cable, 8.2 ft / 2.5 m long Plug ConnectorSwitching Capacity 6 WMax. Switching Current 200 mASwitching Voltage 10 to 30 VSwitching Output PNP NPN PNP NPNReproducible Switching Accuracy ±0.0039 in / ±0.1 mmSwitching Frequency Max. 1 kHzType of Protection per DIN 40050 IP 67Temperature Range Fixed Wiring -4 to +158°F / -20 to +70°C
Flexible Wiring 23 to 158°F / -5 to +70°CMaterials Housing: Diecast zinc, molded in epoxy resin; Cable: PVCWeight 0.176 lb / 0.080 kg
SMTO-1-PS-S-LED-24-CSMTO-1-NS-S-LED-24-C
SMTO-1-PS-K-LED-24-CSMTO-1-NS-K-LED-24-C
www.shuntu.net 010-86879366(Beijing)