magnetel liquid-level · pdf file6300 series magnetel™liquid-level gauges when ordering,...
TRANSCRIPT
TheMeasureofExcellence
Seereversesidefordimensionaldata,materialsofconstruction,performance,andadviceonhowtoorder.
6300Series
Magnetel™
Liquid-Level GaugesM
ag ne te
l™
Liq
uid
-Lev el G
auges
ApplicationThe 6300 Series Magnetel™ liquid-level gauges are de signed to ac cu rate ly de ter mine the per cent age of
total tank vol ume for most liq uids in sta tion ary-stor age ap pli ca tions. UL list ed for LP Gas and NH3 ser vice.
General In for ma tion & Features*These Mag ne tel™ Gaug es are available in four basic models:Model 6336 — Incorporates 4" [100 mm] dial and is de signed for top mount ing.Model 6360 — Incorporates 8" [200 mm] dial and is de signed for top mount ing.
Model 6339 — Incorporates 4" [100 mm] dial and is de signed for side, end or angle mount ing.
Model 6342 — Incorporates an 8" [200 mm] dial and is de signed for side, end or angle mount ing.
The large, easy-to-read di als are also easy to remove and re place. Ma te ri als of
con struc tion vary de pend ing on the types of liq uids to be gauged. Many dif fer ent op tion al fea tures are
avail able to meet your spe cif ic needs. These ma te ri als and op tions, along with their pricing impact, are
sum ma rized for each mod el in price list 6300.
Magnetel™ gauges are designed for work ing pres sures rang ing from at mo spher ic to 450 [31 Bar] psig.
For in struc tions on how to in stall the Mag ne tel™ gauge, see
#115-820 Magnetel™ Liquid-LevelGaugeInstallationInstructions.
R
[METRIC]
Prefix Number Application
None Industrial
A anhydrous ammonia (NH3)
C LP-gas and NH3
P LP-gas
D double head (liquified CO2)
M mobile service
V vertical tanks
X straddle mounting (bolt holes straddle vertical centerline)
Y fits through 2” schedule 80 coupling
Suffix Number Gauge Materials (wetted parts)
-11 plated steel and stainless steel
-12 300 series stainless steel, critical parts - type 316 or better
06/08/12
ISO 9001:2008 CERTIFIED
* Materials and specifications are subject to change with out notice. Pressure ratings sub ject to change due to tem per a ture and other en vi ron men tal considerations.
TheMeasureofExcellence11616 Harry Hines Blvd. • P.O. Box 29242 • Dallas, TX 75229 • (972) 241-2161 • FAX (972) 620-1403
Website http://www.rochestergauges.com • E-mail [email protected]
[MET RIC]
6300 Series Magnetel™ Liquid-Level Gauges
When Or der ing, Spec i fy: 1. Liquid to be gauged and spe cif ic grav i ty.
2. Inside diameter of tank, head style: ellipsoidal,
semi-ellipsoidal or hemispherical.3. Complete model number desired from price list 6300,
(example M6342-11).4. Prefix letters for available options from price list 6300.5. If a dial other than standard is required, furnish drawing
and/or details.6. Furnish tank drawings whenever ordering gauges for
an gle-mounting or for installation in vertical tanks.7. Tank mounting flange, if required (see chart above).
A
3.5" [89] Bolt Circle Adapters for Magnetel™ GaugesRochester Machining Standard MS-508 - See Rochester 22 Series
NOTE: The di men sions
of the thread ed neck on
this adapt er are equiv a -
lent to Schedule 80 pipe.
CAUTION: For LP Gas or NH3 ap pli ca tions re -
quir ing 2" NPT con nec tion, spec i fy Y6300 Series
Magnetel™ gauges which includes 0022-00525
sched ule 80 adapter as sem bled to gauge.
NOTE: Y6300 Series gauges will fit through 2” pipe
coupling but will NOT fit through 2” pipe nipple.
B C D
4.75" [120]
2.32"[59]
3.5"[89]
1.18" [30]
2.32"[59]
4.75" [120]4.75" [120]
4.75" [120]
3"[76]
3.5"[89]
1.93" [49]
3.5"[89]
2.32" [59]
2" NPT2.5" NPT
Ceramic Pointer Magnet
Alnico Magnet
High and Low Float Arm Stop
140° Float Travel
9 9⁄16" [243]Diameter
2 9⁄16" [65]From Tank Flange max.
06/08/12
Part #Mates
WithType Material Thread Dimensions
0022-00029
6300 Series
2 1⁄2” NPT
Forged
Steel1⁄2”-13UNC-2B
Reference dwg. A
0022-00030Welding
Reference dwg. B
0022-00500 Reference dwg. C
0022-00525Y6300 Series
ONLY
2” NPT
sch. 80Reference dwg. D