machining centers turning centers bridge mills …

MACHINING CENTERS TURNING CENTERS BRIDGE MILLS BORING MILLS

1 877-668-4262 • [email protected] • w w w.methodsmachine.comMethods Machine Tools, Inc.

HT-Series High Performance LathesMODEL UNIT HT-30Y HT-30MC HT-30SYWORKING RANGESwing Over Bed inches (mm) 36.4” (923.8)Swing Over Saddle inches (mm) 29.7” (755)Standard Turning Diameter inches (mm) 10.8” (275)Maximum Turning Diameter inches (mm) 14” (356)Maximum Turning Length inches (mm) 27.8” (705)Bar Capacity inches (mm) 3” (78) Main: 3” (78) Sub: 1.7” (44)TRAVELX-Axis Travel • Boxways inches (mm) 7”+3.2” (178+82)Y-Axis Travel • Boxways inches (mm) 3.9±2 (100 ±50) - 3.9”±2” (100 ±50)Z-Axis Travel • Boxways inches (mm) 31.3” (795)TAILSTOCKTailstock Travel inches (mm) 28.9” (734) -Quill Diameter inches (mm) 3.1” (80) -Quill Inside Taper MT MT5 -SPINDLESpindle Motor HP 30HP Main: 30HP Sub: 15HPChuck Diameter inches (mm) 10” (254) Main: 10” (254) Sub: 6” (152)Spindle Speed rpm 3,500 Main: 3,500 Sub: 6,000Spindle Nose - A2-8 Main: A2-8 Sub: A2-5Hole Through Spindle inches (mm) 3.6” (91) Main: 3.6” (91) Sub: 2” (52)Minimum Indexing Degree ° 0.001° 0.001°Spindle Bearing I.D. inches (mm) 5.5” (140) 5.5” (140) 3.1” (80)TURRETNumber of Tools - 12Shank Height for Square Tool inches (mm) 1” (25)Shank Dia. for Boring Bar inches (mm) 1.6” (40)Milling Tool Max. Diameter inches (mm) .79” (20)Turret Indexing Time sec 0.25Live Tool Speed rpm 3,000CONTROLFanuc - 18i-TBSpecifications and design characteristics subject to change without notice

HT Standard Equipment• Fanuc 18i-TB control• Two year warranty• Servo tailstock• Fixed tailstock quill (dead center)• Chip conveyor • Hydraulic parts catcher• Bar feeder interface• 100 psi coolant pump• Static tool holder package• Flood coolant over main spindle• Automatic lubrication system• Coolant gun• Air gun• Enclosed splash guard• Dust-proof electrical cabinet• 3-color signal light• Safety interlock package

HT Options• Tool pre-setter (factory)• Hi/low chucking• Expanded memory• Mist collectors• Fire suppression• Turret tooling packages• Spindle workholding packages• Automation packages• Methods turnkey solutions

2877-668-4262 • [email protected] • w w w.methodsmachine.comMethods Machine Tools, Inc.

MODEL UNIT FTC-150 FTC-200LWORKING RANGESwing Over Bed inches (mm) 21.7” (550) 23.6” (600)Swing Over Saddle inches (mm) 10.2” (260) 15.7” (400)Maximum Turning Diameter inches (mm) 11.8” (300) 13.8” (350)Maximum Turning Length inches (mm) 12.6” (320) 26” (660)Bar Capacity inches (mm) 2” (52) 2.6” (65)TRAVELX-Axis Travel • Linear Guideways inches (mm) 5.9” + .8” (150 + 20) 6.9” + 1” (175+25)Z-Axis Travel • Linear Guideways inches (mm) 13.8” (350) 27.6” (700)TAILSTOCKTailstock Movement - Manual ManualQuill Diameter inches (mm) 2” (50) 2.8” (70)Quill Inside Taper MT MT-3 MT-4Quill Stroke inches (mm) 3.1” (80) 3.5” (90)SPINDLESpindle Motor HP 15HP 25HPHydraulic Chuck Diameter inches (mm) 6” (152) 8” (203)Spindle Speed rpm 6,000 4,500Spindle Nose - A2-5 A2-6TURRETNumber of Tools - 10 12Standard O.D. Tool Size inches (mm) .8” (20) 1” (25)Maximum I.D. Tool Size inches (mm) 1” (25) 1.6” (40)Turret Indexing Time sec 0.3CONTROLFanuc - 0i-TDSpecifications and design characteristics subject to change without notice

FTC-Series Linear Guideway LathesFTC Standard Equipment• Fanuc 0i-TD control• Two year warranty• Manual tailstock (dead center)• 3-jaw power chuck• Hydraulic quill movement• Chip conveyor • Hydraulic parts catcher• Bar feeder interface• 100 psi coolant pump• Tool holder package• Hard jaw (1 set)• Soft jaw (3 sets)• Flood coolant over main spindle• Automatic lubrication system• Enclosed splash guard• Safety interlock package

FTC Options• Tool pre-setter (factory)• Programmable tailstock (factory)• Hi/low chucking• Expanded memory• Mist collectors• Fire suppression• Turret tooling packages• Spindle workholding packages• Automation packages• Methods turnkey solutions


MODEL UNIT FT-200A FT-250A FT-350L FT-350AL FT-500 FT-500XLWORKING RANGESwing Over Bed inches (mm) 17.7” (450) 26.8” (680) 28.3” (720) 35.4” (900) 33.5” (850)Maximum Turning Diameter inches (mm) 12.6” (320) 16.5” (420) 23.6” (600) 31.5” (800)Maximum Turning Length inches (mm) 19.7” (500) 41.3” (1,050) 60.2” (1,530) 39.6” (1,006) 118.3” (3,006)Bar Capacity inches (mm) 2.6” (65) 3.3” (85) 3.6” (91) 4.5” (115) 6.4” (162)TRAVEL

X-Axis Travel • Boxways inches (mm)

6.3” + .4” (160+10)

8.3” + .8”(210+20)

11.8” + .8”(300+20)

15.7” + 1”(400+25)

Z-Axis Travel • Boxways inches (mm) 21.3” (540) 42.9” (1,090) 63” (1,600) 43.3” (1,100) 122” (3,100)TAILSTOCKQuill Diameter inches (mm) 3” (75) 3.9” (100) 4.3” (110) 6.1” (155)Quill Inside Taper MT 4 5 5 6SPINDLESpindle Motor HP 20HP 25HP 40HP 50HPChuck Diameter inches (mm) 8” (203) 10” (254) 12” (305) 15” (381) 18” (457)Spindle Speed rpm 5,000 3,500 2,500 2,000 1,500Spindle Nose - A2-5 A2-8 A2-8 A2-11 A2-11TURRETNumber of Tools - 12Shank Height for Square Tool inches (mm) .8” (20) 1” (25) 1.3” (32)Shank Diameter for Boring Bar inches (mm) 1.3” (32) 1.6” (40) 2” (50)CONTROLFanuc - 0i-TDSpecifications and design characteristics subject to change without notice

FT-Series Boxway Lathes

FT Standard Equipment• Fanuc 0i-TD control• Two year warranty• Manual tailstock (dead center)• 3-jaw power chuck• Steady rest bracket (prep for FT-500/500XL only)• Hydraulic quill movement• Hydraulic parts catcher (FT-200A/FT-250A only)• Bar feeder interface• Tool holder package• 100 psi coolant pump• Flood coolant over main spindle• Automatic lubrication system• Enclosed splash guard• Safety interlock package

FT Options• Tool pre-setter (factory)• Programmable tailstock (factory)• Hi/low chucking• Expanded memory• Mist collectors• Fire suppression• Turret tooling packages• Spindle workholding packages• Automation packages• Methods turnkey solutions


HV-Series High Performance VMC’sMODEL UNIT HV-800 HV-1000TRAVELX-Axis • Roller guideways inches (mm) 31.5” (800) 39.4” (1,000)Y-Axis • Roller guideways inches (mm) 20.5” (520) 20.5” (520)Z-Axis • Boxways inches (mm) 19.9” (505) 19.9” (505)Spindle Nose to Table Surface inches (mm) 5.1” ~ 25” (130 ~ 635) 3.9” ~ 23.8” (100 ~ 605)Spindle Center to Column Surface inches (mm) 22” (560) 22” (560)TABLETable Dimensions inches (mm) 37.4” x 20.5” (950 x 520) 45.3” x 20.5” (1,150 x 520)Maximum Load lbs. (kg) 1,100 (500) 1,100 (500)SPINDLESpindle Speed rpm 15,000Spindle Taper BT/CAT BIG-PLUS 40 TaperSpindle Power HP 30HP Direct DriveFEEDRATEX-Axis Rapid Traverse inches (m)/min 2,362” (60)Y-Axis Rapid Traverse inches (m)/min 2,362” (60)Z-Axis Rapid Traverse inches (m)/min 1,181” (30)ATCTool Changer - Dual Swing Arm TypeMaximum Number of Tools - 30 • 50 OptionalPull Stud - JIS B 6339Maximum Tool Weight lbs. (kg) 17.6 (8)Maximum Tool Length inches (mm) 11.8” (300)Maximum Tool Diameter inches (mm) 3.1” (80)Maximum Tool Dia. - No Adjacent Tool inches (mm) 5.9” (150)Tool Changing Time - Tool to Tool sec 1.9DIMENSIONS/WEIGHT/CAPACITIESFloor Space ~ with chip conveyor inches (mm) 152” x 86” (3,850 x 2,185) 157” x 86” (3,985 x 2,185)Weight lbs. (kg) 15,100 (6,850) 15,760 (7,150)Maximum Machine Height inches (mm) 112.2” (2,850) 112.2” (2,850)Coolant Tank Capacity gal. (liters) 83 (313) 83 (313)Power Capacity KVA 25CONTROLFanuc - 18i-MBSpecifications subject to change without notice

HV Standard Equipment• Fanuc 18i-MB control• Two year warranty• Chip conveyor • Dual chip augers • Prepared for coolant through spindle (does not include pump)• Spindle oil cooler• 4th axis preparation (does not include drives or motors)• Extra set of 8 M-functions• Auto power off• AICC - 40 block look ahead• Double anchor pretensioned ballscrews• Automatic lubrication system• Enclosed splash guard• Dust-proof electrical cabinet• Rigid tapping• 3-color signal light• Coolant flushing system• Coolant flushing gun• Spindle ring coolant nozzles• Spindle coolant nozzle• Safety interlock package

HV Options• Heidenhain linear scales on 3 axes (factory)• HPCC, RISC, data server, ethernet• 50 tool ATC (factory)• Coolant through systems• Touch probe in-process measurement• Tool length measurement and broken tool detection• Expanded memory• Mist collectors• Fire suppression• Rotary tables• Tooling and workholding packages• Automation packages• Methods turnkey solutions


VB-Series Boxway VMC’sMODEL UNIT VB-900 VB-1100 VB-1300 VB-1400 VB-1650 VB-1900 VB-2200TRAVELX-Axis • Boxways inches (mm) 35.4” (900) 43.3” (1,100) 51.2” (1,300) 55.1” (1,400) 65” (1,650) 74.8” (1,900) 86.6” (2,200)Y-Axis • Boxways inches (mm) 24” (610) 32.5” (825) 35.4” (900) 39.4” (1,000)Z-Axis • Boxways inches (mm) 23.6” (600) 27.6” (700) 31.5” (800)Spindle Nose to Table Surface inches (mm) 4.3” ~ 28” (110~710) 4.9” ~ 28.5” (125~725) 5.7” ~ 33.3” (145~845) 9.3” ~ 40.7” (235~1,035)Spindle Ctr. to Column Surface inches (mm) 26” (660) 33.5” (850) 37.4” (950) 41.3” (1,050)TABLETable Dimensions inches (mm) 45.3” x 23.6” (1,150 x 600) 51.2” x 23.6” (1,300 x 600) 59.1” x 23.6” (1,500 x 600) 65” x 31.5” (1,650 x 800) 74.8” x 31.5” (1,900 x 800) 82.7” x 33.9” (2,100 x 860) 94.5” x 37.8” (2,400 x 960)Maximum Load lbs. (kg) 2,200 (1,000) 2,200 (1,000) 2,860 (1,300) 3,960 (1,800) 3,960 (1,800) 4,840 (2,200) 5,940 (2,700)SPINDLESpindle Speed rpm 8,000 6,000Spindle Taper (BIG-PLUS) BT/CAT 40 50 40 50 40 50 50Spindle Power HP 40 Taper: 15HP • 50 Taper: 25HP 30HPFEEDRATEX-Axis Rapid Traverse inches (m)/min 1,181” (30) 787” (20) 591” (15)Y-Axis Rapid Traverse inches (m)/min 1,181” (30) 787” (20) 591” (15)Z-Axis Rapid Traverse inches (m)/min 945” (24) 709” (18) 472” (12)ATCTool Changer - Dual Swing Arm TypeMaximum Number of Tools - 30 30 • 40 optionalPull Stud - 40 Taper: JIS B 6339 • 50 Taper: JIS B 6339-50P JIS B 6339-50PMaximum Tool Weight lbs. (kg) 17.6 (8) 33 (15)Maximum Tool Length inches (mm) 11.8” (300) 11.8” (300)Maximum Tool Diameter inches (mm) 3.1” (80) 3.9” (100) 5” (127)Maximum Tool Dia. - No Adjacent Tool inches (mm) 5.9” (150) 7.9” (200)Tool Changing Time - Tool to Tool sec 40 Taper: 2.0 sec. • 50 Taper: 3.5 sec. 3.5DIMENSIONS/WEIGHT/CAPACITIESFloor Space ~ with chip conveyor inches (mm) 174” x 86” (4,410 x 2,185) 171” x 86” (4,335 x 2,180) 187” x 92” (4,735 x 2,330) 216” x 130” (5,490 x 3,290) 226” x 130” (5,740 x 3,290) 197” x 150” (5,000 x 3,800) 205” x 150” (5,200 x 3,800)Weight lbs. (kg) 15,400 (7,000) 16,500 (7,500) 17,600 (8,000) 26,400 (12,000) 28,600 (13,000) 41,800 (19,000) 48,400 (22,000)Maximum Machine Height inches (mm) 114.2” (2,900) 106.3” (2,700) 106.3” (2,700) 130” (3,300) 130” (3,300) 133.9” (3,400) 133.9” (3,400)Coolant Tank Capacity gal. (liters) 110 (416)Power Capacity KVA 25 25 25 30 30 35 35CONTROLFanuc - 0i-MDSpecifications subject to change without notice.

VB Standard Equipment• Fanuc 0i-MD control• Two year warranty• Two stage Feeler gearbox• Chip conveyor & dual chip augers (VB-900/1100/1300/1400/1650)• Dual chip conveyor & chip auger (VB-1900/2200)• Prepared for coolant through spindle (does not include pump)• Spindle oil cooler• 4th axis preparation (does not include drives or motors)• Extra set of 8 M-functions• Auto power off

• AICC - 40 block look ahead• Double anchor pretensioned ballscrews• Automatic lubrication system• Enclosed splash guard• Dust-proof electrical cabinet• Rigid tapping• 3-color signal light• Coolant flushing system• Coolant flushing gun• Spindle ring coolant nozzles• Spindle coolant nozzle• Safety interlock package

VB Options• Heidenhain linear scales on 3 axes (factory)• HPCC, RISC, data server, ethernet• 40 tool chain type ATC ~ VB-1900/2200 only (factory)• Coolant through systems• Touch probe in-process measurement• Tool length measurement and broken tool detection• Expanded memory• Mist collectors• Fire suppression• Rotary tables• Tooling and workholding packages• Automation packages• Methods turnkey solutions


VB-Series Boxway VMC’sMODEL UNIT VB-900 VB-1100 VB-1300 VB-1400 VB-1650 VB-1900 VB-2200TRAVELX-Axis • Boxways inches (mm) 35.4” (900) 43.3” (1,100) 51.2” (1,300) 55.1” (1,400) 65” (1,650) 74.8” (1,900) 86.6” (2,200)Y-Axis • Boxways inches (mm) 24” (610) 32.5” (825) 35.4” (900) 39.4” (1,000)Z-Axis • Boxways inches (mm) 23.6” (600) 27.6” (700) 31.5” (800)Spindle Nose to Table Surface inches (mm) 4.3” ~ 28” (110~710) 4.9” ~ 28.5” (125~725) 5.7” ~ 33.3” (145~845) 9.3” ~ 40.7” (235~1,035)Spindle Ctr. to Column Surface inches (mm) 26” (660) 33.5” (850) 37.4” (950) 41.3” (1,050)TABLETable Dimensions inches (mm) 45.3” x 23.6” (1,150 x 600) 51.2” x 23.6” (1,300 x 600) 59.1” x 23.6” (1,500 x 600) 65” x 31.5” (1,650 x 800) 74.8” x 31.5” (1,900 x 800) 82.7” x 33.9” (2,100 x 860) 94.5” x 37.8” (2,400 x 960)Maximum Load lbs. (kg) 2,200 (1,000) 2,200 (1,000) 2,860 (1,300) 3,960 (1,800) 3,960 (1,800) 4,840 (2,200) 5,940 (2,700)SPINDLESpindle Speed rpm 8,000 6,000Spindle Taper (BIG-PLUS) BT/CAT 40 50 40 50 40 50 50Spindle Power HP 40 Taper: 15HP • 50 Taper: 25HP 30HPFEEDRATEX-Axis Rapid Traverse inches (m)/min 1,181” (30) 787” (20) 591” (15)Y-Axis Rapid Traverse inches (m)/min 1,181” (30) 787” (20) 591” (15)Z-Axis Rapid Traverse inches (m)/min 945” (24) 709” (18) 472” (12)ATCTool Changer - Dual Swing Arm TypeMaximum Number of Tools - 30 30 • 40 optionalPull Stud - 40 Taper: JIS B 6339 • 50 Taper: JIS B 6339-50P JIS B 6339-50PMaximum Tool Weight lbs. (kg) 17.6 (8) 33 (15)Maximum Tool Length inches (mm) 11.8” (300) 11.8” (300)Maximum Tool Diameter inches (mm) 3.1” (80) 3.9” (100) 5” (127)Maximum Tool Dia. - No Adjacent Tool inches (mm) 5.9” (150) 7.9” (200)Tool Changing Time - Tool to Tool sec 40 Taper: 2.0 sec. • 50 Taper: 3.5 sec. 3.5DIMENSIONS/WEIGHT/CAPACITIESFloor Space ~ with chip conveyor inches (mm) 174” x 86” (4,410 x 2,185) 171” x 86” (4,335 x 2,180) 187” x 92” (4,735 x 2,330) 216” x 130” (5,490 x 3,290) 226” x 130” (5,740 x 3,290) 197” x 150” (5,000 x 3,800) 205” x 150” (5,200 x 3,800)Weight lbs. (kg) 15,400 (7,000) 16,500 (7,500) 17,600 (8,000) 26,400 (12,000) 28,600 (13,000) 41,800 (19,000) 48,400 (22,000)Maximum Machine Height inches (mm) 114.2” (2,900) 106.3” (2,700) 106.3” (2,700) 130” (3,300) 130” (3,300) 133.9” (3,400) 133.9” (3,400)Coolant Tank Capacity gal. (liters) 110 (416)Power Capacity KVA 25 25 25 30 30 35 35CONTROLFanuc - 0i-MDSpecifications subject to change without notice.


VMP-Series Linear Guideway VMC’sMODEL UNIT VMP-580 VMP-800 VMP-1100TRAVELX-Axis • Linear Guideways inches (mm) 22.8” (580) 32.3” (820) 43.3”(1,100)Y-Axis • Linear Guideways inches (mm) 16.5” (420) 20.5” (520) 24” (610)Z-Axis • Boxways inches (mm) 20” (510) 19.9” (505) 24” (610)

Spindle Nose to Table Surface inches (mm) 3.1” ~ 23.2”(80 ~ 590)

5.1” ~ 25”(130 ~ 635)

5.3” ~ 28.9”(135 ~ 735)

Spindle Center to Column Surface inches (mm) 17.9” (455) 22” (560) 26” (660)TABLE

Table Dimensions inches (mm) 16.5” x 25.6”(420 x 650)

20.5” x 37.4”(520 x 950)

47.2” x 23.6”(1,200 x 600)

Maximum Load lbs. (kg) 660 (300) 1,760 (800) 3,300 (1,500)PC2 PALLET OPTION (VMP-580apc / VMP-800apc)Pallet Changer Type - Rotary Rotary

-

Pallet Change Time sec 6 10

Pallet Dimensions inches (mm)

16.1” x 22.8” (410 x 580)

19.7” x 27.6”(500 x 700)

Maximum Load lbs. (kg) 264 (120) 440 (200)

Spindle Nose to Table Surface inches (mm)

5.3” ~ 25.4”(135 ~ 645)

5.8” ~ 25.7”(148 ~ 653)

SPINDLESpindle Speed rpm 10,000 10,000 10,000 • 15K opt.Spindle Taper BT/CAT BIG-PLUS 40 TaperSpindle Power HP 15HP 15HP 25HPFEEDRATEX-Axis Rapid inches (m)/min 1,890” (48) 1,890” (48) 1,417” (36)Y-Axis Rapid inches (m)/min 1,890” (48) 1,890” (48) 1,417” (36)Z-Axis Rapid inches (m)/min 1,890” (48) 1,181” (30) 945” (24)ATCTool Changer - Dual Swing Arm TypeMaximum Number of Tools - 24 30 • 50 optionalPull Stud - JIS B 6339Maximum Tool Weight lbs. (kg) 15.4 (7) 17.6 (8) 17.6 (8)Maximum Tool Length inches (mm) 9.8” (250) 11.8” (300) 11.8” (300)Maximum Tool Diameter inches (mm) 3.1” (80)Maximum Tool Dia. - No Adjacent Tool inches (mm) 5.1” (130) 5.9” (150) 5.9” (150)Tool Changing Time (Tool to Tool) sec 1.9DIMENSIONS/WEIGHT/CAPACITIES

Floor Space ~ with chip conveyor inches (mm)

115” x 96”(2,910 x 2,440)

152” x 86”(3,850 x 2,185)

175” x 114”(4,450 x 2,900)

Weight lbs. (kg) 6,600 (3,000) 12,800 (5,800) 15,000 (6,800)Maximum Machine Height inches (mm) 93.3” (2,370) 110.2” (2,800) 114.2” (2,900)Coolant Tank Capacity gal. (liters) 65 (245) 83 (313) 123 (465)Power Capacity KVA 20 25 25CONTROLFanuc - 0i-MD 0i-MD • 18i-MB opt.Specifications subject to change without notice.

VMP Standard Equipment• Fanuc 0i-MD control• Two year warranty• Chip conveyor • Dual chip augers • Prepared for coolant through spindle (does not include pump)• Spindle oil cooler• 4th axis preparation (does not include drives or motors)• Extra set of 8 M-functions• Auto power off• AICC - 40 block look ahead• Double anchor pretensioned ballscrews• Automatic lubrication system• Enclosed splash guard• Dust-proof electrical cabinet• Rigid tapping• 3-color signal light• Coolant flushing system• Coolant flushing gun• Spindle ring coolant nozzles• Spindle coolant nozzle• Safety interlock package

VMP Options• Heidenhain linear scales on 3 axes (factory)• HPCC, RISC, data server, ethernet• 50 tool ATC ~ VMP-800/1100 only (factory)• Coolant through systems• VMP-1100 Performance Package: Fanuc 18i-MB control & 15K DD spindle (factory)• Touch probe in-process measurement• Tool length measurement and broken tool detection• Expanded memory• Mist collectors• Fire suppression• Rotary tables• Tooling and workholding packages• Automation packages• Methods turnkey solutions


FBM-Series Moving Column Horizontal Boring MillsMODEL UNIT FBM-110R FBM-130R FBM-110 FBM-130TRAVEL

X-Axis • Boxways inches (mm) 98”, 118”, 165” (2500, 3000, 4200)

118”, 165” (3000, 4200)

85”, 126”, 165” (2160, 3200, 4200)

126”, 165” (3200, 4200)

Y-Axis • Boxways inches (mm) 71” (79”, 91”, 98” opt.) 1800 (2000, 2300, 2500 opt.)

98” (118” opt.)2500 (3000 opt.)

71” (79”, 91”, 98” opt.)1800 (2000, 2300, 2500 opt.)

98” (118” opt.)2500 (3000 opt.)

Z-Axis • Linear Guides, Moving Col. inches (mm) 67” (1700)

W-Axis inches (mm) 27.6” (700)27.6” (35.4” opt.)

700 (900 opt.)27.6” (700) 27.6” (700)

W-Axis Diameter inches (mm) 4.3” (110) 5.1” (130) 4.3” (110) 5.1” (130)FIXED TABLE

Table Size inches(mm)

- -

79” x 55” (2,000 x 1,400)

118” x 55” (3,000 x 1,400)

158” x 55”(4,000 x 1,400)

118” x 67”(3,000 x 1,700)

158” x 67”(4,000 x 1,700)

Maximum Load lbs. (kg) 13,200 (5,987)

19,800 (8,981)

22,000 (9,979)

22,000 (9,979)

26,400 (11,975)

ROTARY TABLERotary Table Size inches (mm) 55” x 63” (1,400 x 1,600) 79” x 71” (2,000 x 1,800)

- -Rotary Table Capacity lbs. (kg) 15,400 (7,000) 33,000 (15,000)B-Axis Increment ° .001° .001°Rotary Table Positioning - Full 4th axis controlled Full 4th axis controlledRotary Table Accuracy w/Std. Encoder arc sec ±5 ±5SPINDLESpindle Speed rpm 2,500 2,000 2,500 2,000Spindle Power HP 35HP 50 TaperFEEDRATEX, Y, Z-Axis Rapid inches (m)/min 472” (12)W-Axis Rapid inches (m)/min 197” (5)Cutting Feedrate inches (m)/min 197” (5)ATCNumber of Tools - 40 (60, 90, 120 optional)Pull Stud - JIS B 6339-50PMaximum Tool Weight lbs. (kg) 55 (25)Maximum Tool Length inches (mm) 15.7” (400)Maximum Tool Diameter inches (mm) 4.9” (125)Max. Tool Diameter - No Adj. Tool inches (mm) 9.8” (250)Tool Changing Time -Tool to Tool sec 15CONTROLFanuc - 18i-MB(A) • full 4th axis 18i-MB(A) • 4th axis preparationSpecifications subject to change without notice.

FBM Standard Equipment• FBM-110R/130R models control: Fanuc 18i-MB (A) control w/full 4th axis• FBM-110/130 models control: Fanuc 18i-MB (A) control w/4th axis preparation (does not include drives or motors) • Two year warranty• Heidenhain linear scales on 3 axes• Automatic tool length measurement (Renishaw T-27)• Chip conveyor • Chip auger• Prepared for coolant through spindle (does not include pump)

• Spindle oil cooler• Auto power off• AICC - 40 block look ahead• Double anchor pretensioned ballscrews• Automatic lubrication system• Splash guard around work table• Dust-proof electrical cabinet• Rigid tapping• 3-color signal light• Coolant flushing system• Coolant flushing gun• Spindle coolant nozzle• Oil/water separator• Safety interlock package

FBM Options• 60/90/120 tool ATC (factory)• Spindle extension sleeve (factory)• W-axis travel extendable to 35.4” (900mm) ~ FBM-130R only (factory)• FBM-110R/130R rotary table encoder with ±2.5 arc sec. accuracy (factory)• Various milling heads (factory)• Coolant through systems• Rotary tables• Expanded memory• Mist collectors • Fire suppression• Touch probe in-process measurement• Tooling and workholding packages• Automation packages • Methods turnkey solutions


MODEL UNIT FV-2214 FV-2218 FV-3214 FV-3218 FV-3224 FV-4214 FV-4218 FV-4224 FV-4233 FV-4240 FV-5218 FV-5224 FV-5233 FV-5240 FV-6224 FV-6233 FV-6240 FV-7233 FV-7240TRAVELX-Axis • Linear Guideways inches (mm) 85” (2,160) 126” (3,200) 165” (4,200) 205” (5,200) 244” (6,200) 284” (7,200)Y-Axis • Linear Guideways inches (mm) 55” (1,400) 71” (1,800) 55” (1,400) 71” (1,800) 95” (2,400) 55” (1,400) 71” (1,800) 95” (2,400) 130” (3,300) 158” (4,000) 71” (1,800) 95” (2,400) 130” (3,300) 158” (4,000) 95” (2,400) 130” (3,300) 158” (4,000) 130” (3,300) 158” (4,000)Z-Axis • Boxways inches (mm) 35.4” (47.2” optional) (900 (1,200 optional)Distance Between Columns inches (mm) 63” (1,600) 79” (2,000) 63” (1,600) 79” (2,000) 98” (2,500) 63” (1,600) 79” (2,000) 98” (2,500) 110” (2,800) 138” (3,500) 79” (2,000) 98” (2,500) 110” (2,800) 138” (3,500) 98” (2,500) 110” (2,800) 138” (3,500) 110” (2,800) 138” (3,500)TABLE

Table Dimensions inches (mm)

79” x 55”(2,000 x 1,400)

79” x 67”(2,000 x 1,700)

118” x 55”(3,000 x 1,400)

118” x 67”(3,000 x 1,700)

118” x 87”(3,000 x 2,200)

158” x 55”(4,000 x 1,400)

158” x 67”(4,000 x 1,700)

158” x 87”(4,000 x 2,200)

158” x 98”(4,000 x 2,500)

158” x 118”(4,000 x 3,000)

197” x 67”(5,000 x 1,700)

197” x 87”(5,000 x 2,200)

197” x 98”(5,000 x 2,500)

197” x 118”(5,000 x 3,000)

236” x 87”(6,000 x 2,200)

236” x 98”(6,000 x 2,500)

236” x 118”(6,000 x 3,000)

236” x 98”(6,000 x 2,500)

236” x 118”(6,000 x 3,000)

Maximum Load lbs. (kg)

28,600(13,000)

33,000(15,000)

41,800(19,000)

48,400(22,000)

52,800(24,000)

48,400(22,000)

57,200(26,000)

66,000(30,000)

66,000(30,000)

66,000(30,000)

72,600(33,000)

85,800 (39,000)

85,800(39,000)

96,800(44,000)

85,800(39,000)

96,800(44,000)

114,400(52,000)

96,800(44,000)

114,400(52,000)

SPINDLESpindle Speed rpm 40 Taper: 15,000 • 50 Taper: 6,000Spindle Power HP 40 Taper: 30HP • 50 Taper: 35HPFEEDRATEX-Axis Rapid inches (m)/min 590” (15) 394” (10) 472” (12)Y-Axis Rapid inches (m)/min 590” (15) 472” (12) 472” (12)Z-Axis Rapid inches (m)/min 472” (12) 472” (12) 472” (12)ATCMaximum Number of Tools - 32 (60, 90, 120 optional)Pull Stud - 40 Taper: JIS B 6339 • 50 Taper: JIS B 6339-50PMaximum Tool Weight lbs. (kg) 40 Taper: 17.6 (8) • 50 Taper: 39.6 (18)Maximum Tool Length inches (mm) 40 Taper: 11.8” (300) • 50 Taper: 13.8” (350)Maximum Tool Diameter inches (mm) 40 Taper: 3.5” (90) • 50 Taper: 4.9” (125)Maximum Tool Dia. - No Adjacent Tool inches (mm) 40 Taper: 5.9” (150) • 50 Taper: 7.9” (200)Tool Changing Time - Tool to Tool sec 8CONTROLFanuc - 40 Taper: 18i-MB (B)w/HPCC • 50 Taper: 18i-MB (A)Specifications subject to change without notice. • FV-Series machine equipped with 40 Taper spindle is designated FV-xxxxHSS • FV-Series machine equipped with 50 Taper spindle is designated FV-xxxx

FV-Series Double Column Bridge Mills

FV Standard Equipment• Fanuc 18i-MB (B) control w/HPCC (40 Taper HSS models only)• Fanuc 18i-MB (A) control (50 Taper machines only)• Two year warranty• THK linear guideways on X-Axis• Schneeberger roller linear guideways on Y-Axis• Heidenhain linear scales standard on 3-axes of 40 taper HSS models• Heidenhain linear scales standard on X-axis only of FV-7233/FV-7240 ~ 50 taper models• German ZF gearboxes• Chip conveyor • Dual chip augers • Prepared for coolant through spindle (does not include pump)• Spindle oil cooler• 4th axis preparation (does not include drives or motors)

• Extra set of 8 M-functions• Auto power off• AICC - 40 block look ahead• Double anchor pretensioned ballscrews• Automatic lubrication system• Enclosed splash guard - no roof (50 Taper models)• Enclosed splash guard with roof (40 Taper HSS models)• Dust-proof electrical cabinet• Rigid tapping• 3-color signal light• Coolant flushing system• Coolant flushing gun• Spindle ring coolant nozzles• Spindle coolant nozzle• Oil/water separator• Safety interlock package

FV Options• Heidenhain linear scale options on 50 taper models ~ varies by model (factory)• HPCC, RISC, data server, ethernet (50 Taper only)• 60/90/120 tool ATC (factory)• Z-axis linear guideways (factory)• 47.2” (1,200 mm) Z-axis travel (factory)• Splash guard w/roof ~ 50 Taper models only (factory)• Various milling heads (factory)• Coolant through systems• Touch probe in-process measurement• Tool length measurement and broken tool detection• Expanded memory• Mist collectors• Fire suppression• Rotary tables• Tooling and workholding packages• Automation packages• Methods turnkey solutions


MODEL UNIT FV-2214 FV-2218 FV-3214 FV-3218 FV-3224 FV-4214 FV-4218 FV-4224 FV-4233 FV-4240 FV-5218 FV-5224 FV-5233 FV-5240 FV-6224 FV-6233 FV-6240 FV-7233 FV-7240TRAVELX-Axis • Linear Guideways inches (mm) 85” (2,160) 126” (3,200) 165” (4,200) 205” (5,200) 244” (6,200) 284” (7,200)Y-Axis • Linear Guideways inches (mm) 55” (1,400) 71” (1,800) 55” (1,400) 71” (1,800) 95” (2,400) 55” (1,400) 71” (1,800) 95” (2,400) 130” (3,300) 158” (4,000) 71” (1,800) 95” (2,400) 130” (3,300) 158” (4,000) 95” (2,400) 130” (3,300) 158” (4,000) 130” (3,300) 158” (4,000)Z-Axis • Boxways inches (mm) 35.4” (47.2” optional) (900 (1,200 optional)Distance Between Columns inches (mm) 63” (1,600) 79” (2,000) 63” (1,600) 79” (2,000) 98” (2,500) 63” (1,600) 79” (2,000) 98” (2,500) 110” (2,800) 138” (3,500) 79” (2,000) 98” (2,500) 110” (2,800) 138” (3,500) 98” (2,500) 110” (2,800) 138” (3,500) 110” (2,800) 138” (3,500)TABLE

Table Dimensions inches (mm)

79” x 55”(2,000 x 1,400)

79” x 67”(2,000 x 1,700)

118” x 55”(3,000 x 1,400)

118” x 67”(3,000 x 1,700)

118” x 87”(3,000 x 2,200)

158” x 55”(4,000 x 1,400)

158” x 67”(4,000 x 1,700)

158” x 87”(4,000 x 2,200)

158” x 98”(4,000 x 2,500)

158” x 118”(4,000 x 3,000)

197” x 67”(5,000 x 1,700)

197” x 87”(5,000 x 2,200)

197” x 98”(5,000 x 2,500)

197” x 118”(5,000 x 3,000)

236” x 87”(6,000 x 2,200)

236” x 98”(6,000 x 2,500)

236” x 118”(6,000 x 3,000)

236” x 98”(6,000 x 2,500)

236” x 118”(6,000 x 3,000)

Maximum Load lbs. (kg)

28,600(13,000)

33,000(15,000)

41,800(19,000)

48,400(22,000)

52,800(24,000)

48,400(22,000)

57,200(26,000)

66,000(30,000)

66,000(30,000)

66,000(30,000)

72,600(33,000)

85,800 (39,000)

85,800(39,000)

96,800(44,000)

85,800(39,000)

96,800(44,000)

114,400(52,000)

96,800(44,000)

114,400(52,000)

SPINDLESpindle Speed rpm 40 Taper: 15,000 • 50 Taper: 6,000Spindle Power HP 40 Taper: 30HP • 50 Taper: 35HPFEEDRATEX-Axis Rapid inches (m)/min 590” (15) 394” (10) 472” (12)Y-Axis Rapid inches (m)/min 590” (15) 472” (12) 472” (12)Z-Axis Rapid inches (m)/min 472” (12) 472” (12) 472” (12)ATCMaximum Number of Tools - 32 (60, 90, 120 optional)Pull Stud - 40 Taper: JIS B 6339 • 50 Taper: JIS B 6339-50PMaximum Tool Weight lbs. (kg) 40 Taper: 17.6 (8) • 50 Taper: 39.6 (18)Maximum Tool Length inches (mm) 40 Taper: 11.8” (300) • 50 Taper: 13.8” (350)Maximum Tool Diameter inches (mm) 40 Taper: 3.5” (90) • 50 Taper: 4.9” (125)Maximum Tool Dia. - No Adjacent Tool inches (mm) 40 Taper: 5.9” (150) • 50 Taper: 7.9” (200)Tool Changing Time - Tool to Tool sec 8CONTROLFanuc - 40 Taper: 18i-MB (B)w/HPCC • 50 Taper: 18i-MB (A)Specifications subject to change without notice. • FV-Series machine equipped with 40 Taper spindle is designated FV-xxxxHSS • FV-Series machine equipped with 50 Taper spindle is designated FV-xxxx

FV-Series Double Column Bridge Mills

65 Union Ave., Sudbury, MA 01776 • 877-668-4262 Fax: 978-440-9405 • [email protected]

Over 175,000 sq.ft. of Technical Center Space with Machinery Under Power • Distributors from Coast to Coast

ARIZONA602-437-2220

MICHIGAN248-624-8601

NORTH CAROLINA704-587-0507

FFG/Feeler is one of the largest machine tool builders in the world. This ALL NEW lineup of machine tools features extensive design

and engineering by Methods Machine Tools, Inc.

Methods-Feeler 051310

machining centers turning centers bridge mills …

Documents