machines and tools the longest world...
TRANSCRIPT
Machines and TOOLsThe LOnGesT WORLd eXPeRience
in TUnGsTen caRBide TOOLinG
The most complete rangeof machines to work dies
Your partner to manufacture wire and cable
Machines and TOOL - P.2
Automatic vertical grinding machine- Machine designed for the grinding of dies with different diameters
without stopping the machine and with no intervention of the operator after the initial programming
- Programme management by computer numerical control
- Automatic feeding of the die at the working station and automatic tightening in a chuck
- Grinding of the cone and cylindrical part without any dismantling, which guarantees a perfect concentricity
- «A minima» wear integrated grinding programme (without reaching the meeting point) > material saving and therefore longer use and life of the die (optimised life)
- Grinding of dies from 1.5 to 10 mm
- Automatic control of the die diameter
- Remote maintenance
aUTOMaTic Machines
Since 1955 AGIR TECHNOLOGIES has designed and manufactured grinding machines dedicated to the machining of tungsten carbide dies.This long experience and this know-how have led to a brand new design of machines managed by computer. Our machines are exported to the 5 continents.
cdc-A-CNC
ALL OUR MACHINES ARE CONFORM TO THE SAFETY NORM
Machines and TOOLs - P.3
Tcsd-CNC
M-cM-CNC
Machining of small diameter dies
- from 0.15 to 1 mm
- Automatic grinding of the pin
- Lapping of the working cone witha steel pin and diamond paste
- Automatic feeding in diamond paste
Cleaning machine- …of the internal profile of drawing dies in
tungsten carbide or in diamond from 0.1 mm
- First machine in the world using the principle of high-pressure steam cleaning
- All the operations are managed by the OPLC :
• Automatic positioning• Cleaning of the bores• Drying• Ejection
Machines and TOOL - P.4
M-iG80
M-iG100-CNC
Semi-automatic horizontal grinding machine- Chuck Ø80 mm
- Programme management by computer numerical control
- For dies from ø0.80 mm to ø20 mm
- Easy to use
- Axis management by motor step by step allowing anadvance in micron
- Memorising of two operations in «learn» mode
- Angle up to 30° (with a stop allowing to work the cylinder and the conewithout any dismantling)
- Different types of spindles available (choice according to the material and the diametersto be ground)
- Totally ducted working area for the user’s safety
- Remote maintenance
inTeRnaL GRindinG MachinesOur long experience in the manufacturing of internal grinding machines has allowed us to design automatic machines that are sturdy, easy to use, precise and safe.
Automatic horizontalgrinding machine- Chuck Ø100 mm
- Programme management by computer numerical control
- For dies from ø0.80 mm to ø30 mm
- Machine precision : 5 µm
- Grinding pass by motor step by step in micron
- New motorised lead angle system (0 to 75°)
- Angle precision : ±30’’
- Easy to use
- Axis management by motor step by stepallowing an advance in micron
- Memorising of five operations in «learn» mode on the first die
- Repetition of the memorised operations to reproduce an identical profile
- Different types of spindles available (choice according to the material and the diameters to be ground)
- Totally ducted working area for the user’s safety
- Remote maintenance
Machines and TOOLs - P.5
Automatic horizontal wet grinding machine- Chuck Ø125 mm
- Programme management by computer numerical control
- For dies up to ø70 mm
- Machine precision : 5µm
- Easy to use
- Axis management by motor step by step allowing an advance in micron
- Memorising of five operations in «learn» mode on the first die
- Motorised lead angle (0 to 75°)
- Angle precision : ±30’’
- Repetition of the memorised operations to reproduce an identical profile
- Different types of spindles available (choice according to the material and the diameters to be ground)
- Central greasing for a simplified maintenance
- Lubrication system for a better grinding (improvedsurface finish)
- Different types of grinding tools accepted (blanking, semi-finishing and polishing grinding wheels)
- Totally ducted working area for the user’s safety
- Remote maintenance
M-iG125-CNC
Machines and TOOL - P.6
- …equipped with a chuckø 80mm
- Complete casing around the chuckto secure the operator’s movements
- Motor with variable speed 0-1,500 or 0-3,000 rpm
- Small size
- Polishing lathe equipped with various systems of tool tightening (chuck Ø160 - 200 or 250 mm, collet chucks, magnetic plate,with back guiding…)
- Complete casing around the chuck to secure the operator’s movements, with a safety key
- Angular positioning of the polishing lathe fora better working comfort
- Simplified control board and safety foot controller
- Motor with variable speed 0-1,500 or 0-3,000 rpm
- Possible adjustment of the ratio torque / speed to adapt to the worked tool
- Possibility of various options
- …equipped with various systems of tool tightening (chuck Ø100 or 125mm, collet chucks, magnetic plate, with back guiding…)
- Complete casing around the chuck to secure the operator’s movements
- Control board on a fixed control panel, movable arm or safety foot controller (options)
- Motor with variable speed 0-1,500 or 0-3,000 rpm
- Easy to use
- Option : Complete workbench
We manufacture a complete range of diamond polishing pastes. The grain size varies from2 to 60 microns
We also commercialise any type of diamond grinding wheels with various grain sizes, from rough grinding to finishing, of plug gauges and polishing woods (different diameters).
POLishinG LaThes
cOnsUMaBLe PROdUcTs
Our manual polishing lathes are dedicated to the polishing of various types of tools and materials. They are equipped with safety devices, electronic speed variators and brakes.
MP1 MP3
MP2
Polishing lathe
Polishing lathe
Polishing lathe on a workbench
Machines and TOOLs - P.7
shaVinG OF MeTaL WiReThe experience in shaving since 1985.
Wire shaving principle Applications
Shaved wire
- Non-ferrous wires (copper, brass, aluminium, etc…)
- Ferrous wires (steel : high carbon, low carbon, stainless, etc…)
- Shaved diameter depending on materials up to 18 mm
- Better surface finish- Suppression of impurities as well as corrosion- An economical and ecological solution
TR-02
MR
TR-01
Shaving head The most rigid shaving head dedicated to wires up to 18 mm depending on the material
Machine equippedwith the TR-02- Rigid table- Control board- Shaving chip conveyor
Shaving tools in tungsten carbide
Shaving headfor diameters below 5 mm
Machines and TOOL - P.8
TUnGsTen caRBide TOOLs
TOOLs FOR WiRes and caBLes
Export towards over 60 countriesToday the most complete range of tools for the industry with a choice of over 60 tungsten carbide grades.
Drawing dies Pressure diefor ferrous and non-ferrous wires
Longer life of the drawing die and better wire quality Studies and realisations
of shape dies
Any shape possible in 3D (evolving cone)
Adjustable diesand blocks
Reducer andguiding rolls
Die Standard
(*) according to drawn metal
For any specific need (nib, casing) do not hesitate to contact us
eurOpean sTandard (*) HOle sizerecOmmended
american sTandard
asiansTandard
din
nib casing From - to (mm)
Ø H Ø H
9 6
28
12 0,1 - 2 r1 W2 - W102
10 8 16 0,2 - 2,5 r2 W2-W3-W102-W103
d10-1008
12 10 20 0,3 - 3,5 r3 - r4 W3 - W103 d10-1210
16 1343
25/27 0,5 - 6 r5 W4 - W104 d10-1613
20 17 32 1,5 - 8 r6 - r7 W5 - W105 d10-2017
25 20 53 35 3,5 - 10,5 r8 W6 - W106 d10-2520
30 24 70 40 4,5 - 13 r9 W7 - W107 d10-3024
Machines and TOOLs - P.9
dRaWinG TOOLs
Extrusion dies, punches, wire-guidesfor the industry of electric wires and cables
The complete range of extrusion toolings :
- Steel- Tungsten carbide- Diamond- Simple wire- Two-wires- Multi-wires- Flat wire, aso
Drawing dies and mandrels
Helical grooved mandrels
Wire-guides, extrusion dies for welding rod
manufacturing
Mandrels for mini tubes (minimum dia.0.40mm)
Machines and TOOL - P.10
TOOLs FOR MeTaL FORMinG
Cold heading
Indirectextrusion
Plate cutting- ironingCold rolling
Ironing
Tube finishing
We manufacture any type of tools : wear-resistant parts, powder compacting tools…
Machines and TOOLs - P.11
OUR hisTORY
A know-how of over 150 years.The longest experience in tungsten carbide tooling for metal forming.
"OUR KNOW-HOW FOR YOUR EFFICIENCY"
AGIR TECHNOLOGIES, the world leader in tools for metal forming and in machines to work tungsten carbide dies.
Pierre FERRET, worker in the company MILAN, polishes the first diamond drawing die in the world.
1865
He settles his owns company and manufactures drawing dies in sapphire, ruby and diamond : Les Ateliers FERRET, the origin of the company AGIR TECHNOLOGIES.
1870
They decide to stop producing diamond, ruby and sapphire dies due to the profitability of tungsten carbide dies.Creation of the company MOUTON by Paul and Maurice MOUTON.
1936
Pierre FERRET and his son Robert develop the tools in tungsten carbide : dies for wire, tube and cold heading.
1945
The company decides to produce its first machines to repair drawing dies.1955
The company PIVOT manufactures its first grinding machines; it will be taken over by the company MOUTON in 1975.
1960
Installation in the premises of Gevrey Chambertin in the heart of the famous Burgundy vineyards. RIVOM becomes the company name.
1963
Jean-Pierre FERRET (4th generation) joins the family company and contributes very actively to its international development for over 48 years.
1968
RIVOM becomes the European leader in tools for metal forming.1980
RIVOM takes over the company MOUTON and creates the AGIR TECHNOLOGIES Group.
1990
RIVOM takes over the company GMA, the producer of metal conveyor belts.1995
The 3 companies (MOUTON, RIVOM, GMA) are gathered in one single entity, AGIR TECHNOLOGIES which runs the 3 brand-names.
2007
1929 Pierre FERRET (son), continues the family company, produces the first tungsten carbide drawing die in the world and manufactures then the first tungsten carbide tool for metal forming.
Tools and machines designed and manufactured in France
FOR ANY INFORMATION
www.agir-technologies.com
[email protected]él. +33 (0) 3 80 51 81 31F-21220 Gevrey-Chambertin - FRANCE
Mar
ch 2
016
– D
escr
iptio
ns a
nd p
hoto
s no
t con
trac
tual