machinery space fine water spray nozzles and valves · low-pressure fine water spray nozzle dnv-gl...
TRANSCRIPT
Machinery Space
Fine Water Spray
Nozzles and Valves
Marine MED Approved
We reserve the right to alter the information without further notice. Images and diagrams are for information only and may not be accurate.
VID Fire-Kill Aps
Svalbardvej 13 I DK-5700 Svendborg I Ph. +45 6262 1024
Fax. +45 6262 3661 I Mail: [email protected] I Web: www.vid.eu
© VID Fire-Kill 2015
Total Flooding Bilge
Model B1 Open Horizontal
Low-Pressure Fine Water Spray Nozzle
DnV-GL and LR Type approval and DnV-GL MED-B EC Type
Examination Certificate for machinery space and cargo pump
room in accordance with IMO MSC Circ. 1165 as amended by
MSC.1/Cic.1269 and MSC.1/Circ.1386.
Min. operation time: 30 min including 1% AFFF
Water pressure: 6—16 bar
Max spacing: 1,5 m x 2 m
Max. height bilge: 1 m
Nozzle inst. Height: 0,3 m to 0,6
Process connection: 1/2” BSP / 1/2” BSP-T / 1/2” NPT
Material: Brass with NiSn
Stainless steel
Filter: AISI 316
Total Flooding
Model K6 Open Pendent
Low-Pressure Fine Water Spray Nozzle
DnV-GL and LR Type approval and DnV-GL MED-B EC Type
Examination Certificate for machinery space and cargo pump
room in accordance with IMO MSC Circ. 1165 as amended by
MSC.1/Cic.1269 and MSC.1/Circ.1386.
Volume: 4520 m3 5036 m3
Min. operation time: 30 min
Water pressure: 8—16 bar 9—16 Bar
Max spacing: 3 m x 3 m 3 m x 3 m
Max. height: 10 m 10 m
Process connection: 1/2” BSP / 1/2” BSP-T / 1/2” NPT
Material: Brass with NiSn
Stainless steel
Filter: AISI 316
Model C-EL Dry Pipe Zone Valve for
Low-Pressure Water Mist System
The VID Fire-Kill Model C-EL Electrically Operated Control
Valve is a series of FM Approved robust and reliable deluge,
angle positioned, pilot controlled valves created entirely in
Stainless Steel (316L) and designed for operating in open
deluge systems as a zone valve or a full flooding/deluge valve,
capable of functioning under harsh conditions and designed
to be connected to systems where no corrosion is allowed.
Max. working press.: 232 psi 16 Bar
Test pressure: 348 psi 24 Bar
Voltage: 24 VDC /8W NC solenoid
24 VDC / 10W Impulse solenoid
Dimension: 2” and 3” DN50 and DN80
INNOVATIVE FIRE PROTECTION SOLUTIONS
Local Application
Model K6 Open Pendent
Low-Pressure Fine Water Spray Nozzle
DnV-GL and LR Type approval and LR MED-B EC Type Exami-
nation Certificate for local application in accordance with
IMO MSC Circ. 1387 as amended by MSC.1/Cic.1269 and
MSC.1/Circ.1386.
Min. operation time: 20 min
Water pressure: 12,5—16 bar
Max spacing: 1,5 m x 1,5 m
Max. distance to object: 11 m
Min. distance to object: 0,75 m
Process connection: 1/2” BSP / 1/2” BSP-T / 1/2” NPT
Material: Brass with NiSn
Stainless steel
Filter: AISI 316