machineguardingsoptechn-6-1

SAFETY OPERATING PROCEDURES Milling Machine DO NOT use this machine unless the technician has instructed you in its safe use and operation and has given permission. Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. CSA footwear must be worn at all times in work areas. Close fitting/protective clothing must be worn. Rings and jewellery must not be worn. Gloves must not be worn when using this machine. PRE-OPERATIONAL SAFETY CHECKS 1. Ensure no slip/trip hazards are present in workspaces and walkways. 2. Locate and ensure you are familiar with the operation of the ON/OFF starter and E-Stop (if fitted). 3. Do not leave equipment on top of the machine. 4. Check that machine guards are in position. 5. Ensure cutter is in good condition and securely mounted. 6. Check coolant delivery system to allow for sufficient flow of coolant. 7. Faulty equipment must not be used. Immediately report suspect machinery. OPERATIONAL SAFETY CHECKS 1. Keep clear of moving machine parts. 2. Never leave the machine running unattended. 3. Follow correct clamping procedures- keep overhangs as small as possible and check work piece is secure. 4. Set the correct speed to suit the cutter diameter, the depth of cut and the material. This SOP does not necessarily cover all possible hazards associated with the machine and should be used in conjunction with other references It is designed to be used as an adjunct to teaching Safety Procedures and to act as a reminder to users prior to machine use Date of last review Signature

Upload: ahmad-afiq

Post on 05-Jan-2016

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

sop

TRANSCRIPT

SAFETY OPERATING PROCEDURES

Milling MachineDO NOT use this machine unless the technician has instructed

you in its safe use and operation and has given permission.

Safety glasses must be worn at all times in work areas.

Long and loose hair must be contained.

CSA footwear must be worn at all times in work areas.

Close fitting/protective clothing must be worn.

Rings and jewellery must not be worn.

Gloves must not be worn when using this machine.

PRE-OPERATIONAL SAFETY CHECKS1. Ensure no slip/trip hazards are present in workspaces and walkways. 2. Locate and ensure you are familiar with the operation of the ON/OFF starter and E-

Stop (if fitted).3. Do not leave equipment on top of the machine.4. Check that machine guards are in position.5. Ensure cutter is in good condition and securely mounted.6. Check coolant delivery system to allow for sufficient flow of coolant.7. Faulty equipment must not be used. Immediately report suspect machinery.

OPERATIONAL SAFETY CHECKS1. Keep clear of moving machine parts. 2. Never leave the machine running unattended. 3. Follow correct clamping procedures- keep overhangs as small as possible and check

work piece is secure.4. Set the correct speed to suit the cutter diameter, the depth of cut and the material.5. Before making adjustments and measurements or before cleaning swarf accumulations

switch off and bring the machine to a complete standstill.

HOUSEKEEPING1. Switch off the machine. 2. Remove milling cutters and store them safely.3. Leave the machine and work area in a safe, clean and tidy state.

POTENTIAL HAZARDS Sharp cutters Moving components - hair/clothing entanglement Eye injury Skin irritation Metal splinters and burrs Flying debris

This SOP does not necessarily cover all possible hazards associated with the machine and should be used in conjunction with other referencesIt is designed to be used as an adjunct to teaching Safety Procedures and to act as a reminder to users prior to machine use

Date of last review Signature

8 ;1 6+.6' 1+8 6 ;1 6+A );1 · ขณะที่ยังมีชีวิตคือมีขันธ์ อยู่ 5 เราจะต้องอยู่กับกองแห่งทุกข์อยู่ตลอด

+ 10 1 1 1 1 1 1 1 1 1 1 1 1 = 1 1 1 1 1 1 + 6 2 6 1 + 6 3 6 1 6 1 6 1 6 1 6 1 6 1 Step 2: The denominator remains the same. Step 3: Simplify the sum,

SONOMA COUNTY - Californiafrap.fire.ca.gov/webdata/maps/sonoma/fhszs_map.49.pdf · 1 6 1 6 6 1 1 1 6 6 1 6 6 1 6 6 1 6 6 1 6 1 6 1 1 6 1 1 6 6 1 6 6 6 6 1 1 1 6 6 6 6 1 1 1 6 1 6

testportal.gov.ua · 1 23435617681 9350 01 96 50 0 1 6 50 61 23 7 1 73 01 61 1 6 6 17 505 1 1 6 6 1 96 50 61 056 1 1 1 6 6 196506 1 •0†3 0 56 1 73 01 1 1 6 6 1• “3 1 61‘

6 7 ) 5 $ 1 & ,6 ' ( 6 $ / ( 6 + 2 8 6 7 2 1 7 · 7/26/2020 · 6 7 ) 5 $ 1 & ,6 ' ( 6 $ / ( 6 + 2 8 6 7 2 1 7 ; - 8 / < 0 $66, 17 ( 1 7 ,2 1 6 ,1 7 ( 1&,2 1 ( 6' ( 0 ,6$ 5( $' ,1

YJ 11 -1-6 col IRI 111 01-H Illiò +1-6 41 J *1-6 V -1-6 Illiö -1-6 .../media/Files/kanagawa/...2019/01/06 · col IRI 111 01-H Illiò +1-6 41 J *1-6 V -1-6 Illiö -1-6 -1-6 -H p

4444 % $%$& # 5 #/-/ % % )) %%$/ #) )#- ) %) 1# % #. 3 6 #%' &% 7( …€¦ · %) 6 6+ ,. / 1-#$& &( 6#% 1%$& / 1%$2 +. / $% ' . /1$ + # ( # $& *)$1) ;-/%$1 /1$ + 1&'$1 &( 6+$%$1

ID DOCUMENTO: KhyrRitZZm · 1 6 1 5 1 * 1 -7'1 66 +0 ) 8)# 4! 0 # $ #/ ,2 4 #%##& 0) 6 6 6 7 6 6 6 *1 6 - 6 - 6 6* 6 6 7 6 6 6 -'6 ... %1 1%1 ID DOCUMENTO: KhyrRitZZm. FIRMADO POR

Ponton...Ponton 6 6 6 6 6 : 6 : : : : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ( ( (

> 671) "6 ' 6+"" href="https://vdocuments.site/sistem-guru-online-sgo-web-pendidikan-no1-di-malaysia-6-1-262.html">Sistem Guru Online - "SGO Web Pendidikan No.1 di Malaysia ...€¦ · '6# 1 2"62 1 7 6+"' 7 6 & ' $ % 6 6 & ' 6 < 6 1: 62 % $ :6 ' " 6#) ' 6& ' 1 "& 6 8> > 671) "6 ' 6+"

AAAABABBBABc DATA UMUM · 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 # 30 Dinar Marsilaningsih, S. Pd. BIN 5 6 5 5 6 # 31 Syofiyah, S.Pd BIN 6 6 6 6 6 # 32 Yofi Irwantiyono, S.Ag QH QH