m117-ca505_-en-p
DESCRIPTION
DevicenetTRANSCRIPT
-
Dev
iceN
etM
edia
Saf
ety
Co
nnec
tion
Pan
nelC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P 6-1
DeviceNet Media System
Table of Contents
DeviceNet Media System
General Information
DeviceNet Flat Media SystemKwikLink Lite
KwikLink General Purpose
KwikLink Heavy Duty
DeviceNet Round Media
DeviceNet Auxiliary Power Round Media
Cat. No. Index...................................................................12-1
Typical Configuration .....................................................................6-54Mini, Micro to Mini Cordsets & Patchcords ..................................6-55Flex-Rated Cordsets & Patchcords...............................................6-57Bulkhead Pass-Thru ......................................................................6-59Receptacles ...................................................................................6-60Trunk Tee........................................................................................6-61Single Channel Safety Shorting Plugs ..........................................6-63
Thick Trunk Typical Configuration .................................................6-29Thin Trunk Typical Configuration ...................................................6-30Thick Cable, Cordsets & Patchcords, Cable Spools.....................6-31Thin Cable, Cordsets & Patchcords, Cable Spools ......................6-33Thick and Thin Media, Receptacles ..............................................6-35Terminal Chambers........................................................................6-37Bulkhead Pass-Thru ......................................................................6-39Terminators ....................................................................................6-40Mini T-Port .....................................................................................6-41Micro T-Port ...................................................................................6-43Gender and Configuration Changers.............................................6-44PowerTap ...................................................................................6-452-, 4-, 8-Port DeviceBox ...............................................................6-46Thru-Trunk DevicePort...................................................................6-47Drop-Connected DevicePort .........................................................6-48Open-Style Y-Adaptor ...................................................................6-49Open-Style Cordsets .....................................................................6-50Open-Style to Micro Adaptor ........................................................6-52Open-Style Connectors & Accessories .........................................6-53
Quick Selection Guide .....................................................................6-2Introduction......................................................................................6-4
Introduction......................................................................................6-6Cable Spools ...................................................................................6-7Trunk-Line Connector, Drop-Line Connector, and
Flat to Thin Round Converter, IDC ...............................................6-8Five-Pin Open-Style Connector.......................................................6-9Drop Cable.....................................................................................6-10Terminal Block IDC ........................................................................6-11
Typical Configuration .....................................................................6-12Flat Cable Trunk.............................................................................6-13Connectors ....................................................................................6-14Drop Cordsets ...............................................................................6-15Micro Auxiliary Power Cordsets & Patchcords .............................6-16Accessories....................................................................................6-17
Typical Configuration .....................................................................6-18Flat Cable Trunk.............................................................................6-19Trunk Splice Kit..............................................................................6-20Insulation Displacement Connectors.............................................6-21Pigtail Drop, Insulation Displacement Connectors........................6-22DevicePort..................................................................................6-23Drop Cable Cordsets .....................................................................6-24Terminal Chambers........................................................................6-25Micro Auxiliary Power Cordsets and Patchcords..........................6-26Auxiliary Power IDCs .....................................................................6-27Accessories....................................................................................6-28
-
PannelC
onnect
Co
nnection
System
sIntro
ductio
nQ
uick Selectio
nG
eneralD
eviceNet
Med
iaS
afetyC
onnectio
nP
annelCo
nnectC
onnectio
nS
ystems
Introd
uction
Quick S
election
General
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P6-2
DeviceNet Media System
Quick Selection Guide
1485PKwikLink Lite
1485CKwikLink Cable
1485PKwikLink General
Purpose Connectors1485P
KwikLink Connectors
1485T & 1485PKwikLink Heavy Duty
Connectors
Description IDCs with flat media forIP20 applicationsKeyed flat trunk cable for
use with IDCs
Vampire connectors foruse with KwikLink flat
cable in general purposeapplications
IDCs for use with KwikLinkflat cable.
IDCs with integral Class 1round cable pigtail forinterfacing a device or
power supply to flat cable
Features
Plug and playinstallation
Cable, CL2 IP20
Keyed to prevent wiringmishaps
TPE or PVC jacket Class 1 or Class 2 rated
cable versions Available in spools up to
420 m (1378 ft)
Plug and playinstallation
Two-piece housing Designed for general
purpose applications IP67 rated
Plug and playinstallation
UL Listed and CSACertified
Valox construction Sealed: 1200 psi (8270
kPa) washdown
Plug and playinstallation
Allows Class 1 drop toKwikLink system
Includes IDC connectorand pigtail module
Connections Conductor Open-style Micro QD
NA Micro QD Micro QD Open-style Terminator
Micro QD Conductor
Available Models CL2 CPE CL1 rated PVC CL2 rated
Micro QD Sealed Unsealed
Sealed Unsealed
Additional Info See page 6-7 See page 6-13 and 6-19 See page 6-14 See page 6-21 See page 6-22
1485P KwikLinkSplice Kits
1485A Bulkhead Pass-Thru Connectors 1485T PowerTap 1485P DeviceBox 1485P DevicePort
Description
A pair of IDCs factory-joined with Class 1 roundcable for splicing togethertwo sections of flat cable
network
Mini or micro bulkheadpass-thru connectors for
convenient routing ofDeviceNet wiring through
panel walls
Passive coupling deviceused to limit trunk current
Passive sealed junctionboxes for up to eight
smart devices
Passive multi-port tap forup to eight smart devices
Features
Plug and playinstallation
Available in standardsplice kit and powerisolation splice kitversions
Includes IDC, splicemodule and flat cableend caps
Nickel-plated brasshousing standard
Stainless steel housingversions available
Allows for multiplepower supplies
7.5 A or 3 A fuseprotection (2x)
Thick media and thinmedia versions
2, 4, or 8 ports Cord grip openings Direct connection to
trunk Thick media and thin
media versions
4 or 8 ports Connection to trunk via
drop line Stainless steel option
Connections KwikLink module toKwikLink module Mini QD Micro QD
Cage-clamp terminal strips Cage-clamp terminal strips Mini QD Micro QD
Available Models
Sealed Unsealed Standard splice kit Power isolation splice kit
4- and 5-pin mini 5-pin DC micro
Thick media Thin media
Thick media Thin media
QD drop connector Pigtail drop connector Cable drop connector Thru-trunk
Additional Info See page 6-20 See page 6-39 and 6-59 See page 6-45 See page 6-46 See page 6-23, 6-47, 6-48
-
Dev
iceN
etM
edia
Saf
ety
Co
nnec
tion
Pan
nelC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P 6-3
DeviceNet Media System
Quick Selection Guide
1485P T-Port andGender Changers
1485K KwikLinkDrop Cables 1485C Thick Media 1485C Thin Media Terminal Chambers
Description Connects a single dropline to the trunk
Four-wire unshielded dropcables for use exclusively
with KwikLink systems
12.2 mm (1/2 in.) cable forDeviceNet trunkline offered
in cable spools, moldedconnectors, and
receptacles
6.9 mm (1/4 in.) cable forDeviceNet trunkline or
droplines offered in cablespools, moldedconnectors and
receptacles
Mini or micro fieldattachable connectors with
screw terminals forDeviceNet
Features
Right or left keyway forpositioning purposes
Stainless steel option
For use only withKwikLink Flat Mediasystem
Epoxy-coated zinccoupling nut
PVC jacket
PVC jacket Standard cordset
lengths up to 30 m (98ft)
Available in raw spoolsup to 500 m (1640 ft)
Stainless steel option
Yellow CPE or gray PVCjacket
Standard cordsetlengths up to 6 m (19.6ft)
Available in raw spoolsup to 600 m (1968 ft)
Stainless steel option
Straight or right angle Male and female
versions Screw terminal
connection IP67 rating
Connections Mini QD Micro QD
Mini QD Micro QD Conductor
Mini QD Conductor
Mini QD Micro QD Conductor
Mini QD Micro QD
Available Models Mini drop connector Micro drop connector
Single ended Double ended
Cable spools Premolded segments Panel mount receptacles Field attachable
connectors Terminators
Cable spools Premolded segments Panel mount receptacles Field attachable
connectors Terminators
Mini for Thick Media Mini for Thin Media Micro for Thin Media
Additional Info See page 6-44 and 6-45 See page 6-15, 6-24, 6-48 See page 6-31 See page 6-33 See page 6-25 and 6-37
1485A Accessories 889N Auxiliary Power Media889N Auxiliary Power/Single
Channel Safety Media 1485 Accessories
Description Accessories to complementKwikLink flat media systems
4-pin patchcords, receptacles, T-ports, terminal chambers,
bulkhead pass-throughconnectors and accessories forauxiliary power for DeviceNet
4-pin T-ports and shorting plugswired to provide both auxiliarypower and a single channel safetycircuitNote: Safety circuit is passive
and not part of theDeviceNet communicationnetwork.
Accessories to complementDeviceNet media system
installations
Features
Durable construction Simple mounting and
installation
Yellow PVC jacket Standard patchcord lengths up
to 30 m (98 ft)
Red PBT housing Male or female shorting plugs
available For use in conjunction with
standard auxiliary power mediacomponents
Durable construction Broad range of connection
types Simplified installation
Connections Micro QD Mini QD Mini QD Mini QD Micro QD Open-style
Available Models
KwikLink dust cap Conduit adapters KwikLink end caps Flat cable mounting clamp Micro sealing cap Micro terminator
Patchcords T-ports Receptacles Bulkhead pass-thru
T-ports Shorting plugs
Terminating resistor Sealing caps Open-style connectors Gender changes
Additional Info See page 6-17, 6-28, 6-53 See page 6-55 See page 6-61 See page 6-53
-
DeviceNet Media System
Introduction
6-4Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
General Description
KwikLink Flat Media System
Round MediaThick Trunk System
Round MediaThin Trunk System
General Characteristics
Data Rates 125 k baud 250 k baud 500 k baud
Flat Trunk Distance 420 m (1378 ft) 200 m (656 ft) 75 m (246 ft)
Thick Trunk Distance 500 m (1640 ft) 250 m (820 ft) 100 m (328 ft)
Thin Trunk Distance 100 m (328 ft)
Max. Drop Length 6.1 m (20 ft)
Cumulative Drop 156 m (512 ft) 78 m (256 ft) 39 m (128 ft)
Number of Nodes 64
For detailed information on these characteristics, see Rockwell Automation publication DN 6.7.2.
Round Media DeviceNet Connection Wiring
Mini Connector Micro Connector
Color CodeFace View of Female Face View of Male Face View of Female Face View of Male
254
31 54
3 12
1. Drain2. Red (V+)3. Black (V-)4. White (CAN_H)5. Blue (CAN_L)
Rockwell Automation round media thintrunk systems are based on the use of thincable for DeviceNet. The use of thin cablereduces maximum trunk line distances butallows for a more compact and costeffective installation for some applications.Rockwell Automation thin cable outer jacketmaterial is either grey PVC for standardenvironments or yellow CPE for additionalchemical resistance. Thin trunk cable isavailable in a wide variety of configurationsincluding raw spools and both micro andmini cordsets and patchcords. Similar toRockwell Automation thick trunk systems,compatible components include t-ports,DeviceBox, DevicePort, PowerTap, and amultitude of other components andaccessories. Stainless steel versions of thincable system components are alsoavailable. For complete information onsystem installation and associated details,see Rockwell Automation publication DN-6.7.2.
variety of rugged, durable Allen BradleyDeviceNet components are available for usein thick trunk systems. These componentsinclude drop cables, t-ports, DeviceBox,DevicePort, PowerTap, and a multitude ofother components and accessories.Stainless steel versions of thick cablesystem components are also available. Forcomplete information on system installationand associated details, see RockwellAutomation publication DN-6.7.2.
Rockwell Automation's round media thicktrunk systems are based on the use ofthick cable for DeviceNet. RockwellAutomation thick trunk cable allowsmaximum trunk line distance and is theoriginal DeviceNet system configuration.Thick trunk cable is available in bulk spoolsor as mini male to mini female cordsets orpatchcords in varying lengths. A wide
KwikLink Heavy Duty Connectors are theoriginal connector style for flat media. Thisrugged industrial connector designincorporates a removable field interface capin a multitude of connection types includingmicro, mini pigtail, cable pigtail, open style,and terminator styles, in addition to splicekits for joining two separate flat media trunksections.
KwikLink General Purpose connectorsprovide a simple low profile two-piececonnector design for less demandingindustrial applications. These micro styleconnectors are offered with an extremelypliable flat cable for maximum ease ofinstallation and cable routing and are ratedfor use in IP67 environments.
ArmorBlock MaXum I/O is alsospecifically designed to provide a directinterface to the KwikLink flat media system.A full complement of accessories isavailable. For complete information onsystem installation and associated details,see Rockwell Automation publication DN-6.7.2 and 1485-IN001A-EN-P.
The KwikLink flat media system provides asimple, modular cabling method with itsflat, 4-wire cable and InsulationDisplacement Connectors (IDCs). Designedto promote up to 50% savings ininstallation costs by offering a drasticreduction in labor and materials, theKwikLink system allows nodes to be addedto the network quickly and easilywithoutsevering the trunkline. Cutting or strippingof the trunkline is eliminated, as is the needfor predetermined cable lengths. KwikLinkoffers maximum simplicity while stillsupporting 64 nodes.
DeviceNet is an open communicationnetwork designed to connect factory floordevices such as photoelectric sensors,inductive proximity sensors, motorstarters,drives, valve manifolds, and simple operatorinterfaces together without interfacingthrough an I/O system. It increases theamount and rate of information flowing fromplant floor devices to control systems, andhas the potential to substantially reducewiring costs. Up to 64 intelligent nodes canbe connected to one DeviceNet network.The ability to remove and replace devicesfrom the network while under power withouta programming tool is a distinct advantageof the DeviceNet network.
The DeviceNet network consists of acabling system that provides both powerand communication to nodes.Rockwell Automation offers a number ofmedia products for device connection andcommunication needs.
-
DeviceNet Media System
Introduction
6-5Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Typical Configuration
1. KwikLink Lite IP20 Flat Media..............6-72. Trunk Line Connector...........................6-83. Drop Line Connector............................6-84. Terminating Resistor.............................6-8
5. 5-Pin Open Style Connector................6-96. Terminal Block....................................6-117. Flat to Thin Cable Converter................6-8
8. KwikLink Drop Cable .........................6-10
9. ArmorBlock.....................................10-310. Auxiliary Power Cordset...................6-55
CommunicationsPower Supply
Component on DeviceNet Network
PLC PanelView
-
DeviceNet Media System
IntroductionFlat Media
6-6Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
KwikLink Lite Flat Media SystemKwikLink Lite is the new, ODVA-approvedsolution for wiring DeviceNet networks. Thisnew media makes DeviceNet wiring andcable installation both quick and easy, andextends the network into light-duty, IP20-rated applications. Drop-lines forconnecting nodes can be easily addedusing the unique KwikLink Lite two-piececonnectors. Additionally, the cable systemsupports the intermixing of DeviceNet cabletypes (thin-round with flat). All of theKwikLink Lite Connectors provide InsulationDisplacement Technology with reducedassembly time.
Product Selection
Description Cat. No.KwikLink Lite Flat Media 1485C-P1W
100, 300, or 600 m
1. Select Trunk Line Media:A. IP20 flat media. Cable spools are
available in 100, 300, and 600 m.
B. Termination resistor on main trunk:
Description Cat. No.
Trunk line connector (IDC plug,creates a drop off trunk) 1485P-K1TG4
Terminating resistor (plugs intotrunk line connector) 1485P-K1TR4
2. Select: Drop style off the main trunk:A. Flat media with 5-pin open style
connection to a DeviceNet node:
Description Cat. No.
KwikLink Lite flat media 1485C-P1W
Trunk line connector (IDCplug, creates a drop off
trunk)1485P-K1TG4
Drop line connector (plugsinto trunk line connector) 1485P-K1DL4
5-pin open style connector,IDC 1485P-K1G4-Y5
OR
5-pin open style connector,screw terminal 1799-DNETCON
100, 300, or 600 m
AND/OR
B. Round media: Integrating thin roundDeviceNet media:
Description Cat. No.
Trunk line connector (IDCplug, creates a drop off trunk) 1485P-K1TG4
Flat to thin converter (plugsinto trunk line connector) 1485P-K1GK4
Cordset: Thin roundDeviceNet media (plugs into
converter)1485K-PR5-C
1, 2, or 6 m
3. Optional: Use power input from anexternal power supply:
Description Cat. No.Terminal block with built-in
resistor 1485P-K1TLR4
Note: Crimping pliers are required for properassembly.
Description Cat. No.Crimping tool for KwikLink Lite
connectors 1485A-KCRIMP
General Characteristics
Data Rates 125 k Baud 205 k Baud 500 k Baud
KwikLink Lite flat trunk distance 350 m (1148 ft) 150 m (492 ft) 55 m (180 ft)
Flat trunk distance 420 m (1378 ft) 200 m (656 ft) 75 m (246 ft)
Thick trunk distance 500 m (1640 ft) 250 m (820 ft) 100 m (328 ft)
Thin trunk distance 100 m (328 ft)
Max. drop length 6.1 m (20 ft)
Cumulative drop 156 m (512 ft) 78 m (256 ft)
Number of nodes 64
For detailed information on these characteristics, see Rockwell Automation publication DN-6.7.2-MAY99.
-
DeviceNet Media System
KwikLink Lite Flat Media
6-7Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Cable Spools
Description
Features
Specifications
IP20 media is great for in-cabinet andother light duty DeviceNet applications
Support mixture of network layouts andtopologies
Compatible with KwikLink GeneralPurpose DeviceNet thin round media
Data rate 125 K baud350 meter max.distance
Data rate 250 K baud150 meter max.distance
Data rate 500 K baud55 meter max.distance
Certifications UL and cUL Listed
Cable Type 4 conductor unshielded
Contact Material Tinned annealed copper
Cable Rating CL2 2c/AWG 19 and 2c/AWG 21 90C, CL2 and CM Certified
Home Run Connection 26 mm (1.02 in.)
Operating Temperature [C (F)] -10+90 (14194 )
Product Selection
Description Cat. No.IP20 Flat Media 1485C-P1W
Replace with 100 (100 m (328 ft)), 300 (300 m(984 ft)), or 600 (600 m (1968 ft)).
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Blue BlackWhiteRed
10.16 (0.40)
0.25 (0.009)
2.54(0.09)
PVC Colored4 places
#19 AWGConductors
1.0 (0.04)
2.0(0.078)
PVC Clear
KwikLink Lite flat media is an unsheathedcable suitable for IP20 applications. Flatmedia was specially made for InsulationDisplacement technology providing analternate solution to DeviceNet media.
Flat media has a 300V and 4 A rating. It issuitable in commercial and light industrialenvironments (E1 and E2 noiseenvironments according to MICEstandards). This flat media should not beused with shielded cable. Using shieldedcable will leave the shield unterminated,resulting in noise issues and a decrease inthe overall performance level of theunshielded system. This cable should onlybe used with KwikLink Lite connectors.
-
DeviceNet Media System
KwikLink Lite Flat MediaTrunk-Line Connector, Drop-Line Connector, and Flat to Thin Round Converter, IDC
DeviceN
etM
edia
Safety
Co
nnection
PannelC
onnect
Co
nnection
System
sIntro
ductio
nQ
uick Selectio
nG
eneral
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P6-8
?
Description Must use trunk line connector
(1485P-K1TG4) with drop line connector,resistor, and flat to thin round converter
Must use crimp tool for assembly The trunk line connector (which is
configured quickly to create a drop off themain trunk) can be placed anywhere alongthe trunk.
The drop line connector is plugged intothe trunk line connector and creates adrop with flat media enabling the use of a5-pin open style connector to plug directlyinto a DeviceNet node.
Flat to thin converter is plugged into thetrunk line connector (which creates a dropwith thin round DeviceNet media)integrates round DeviceNet media into theDeviceNet system.
Terminating resistors are plugged into thetrunk line connector to terminate the trunkon each end
Features Insulation displacement connectivity (IDC) Easy to assemble Terminating resistor needed at each end
of the trunk Easy transition from KwikLink Lite flat
media to existing thin round KwikLinkmedia Product Selection
Description Cat. No.
Trunk line connector, IDC 1485P-K1TG4
Drop line connector, IDC 1485P-K1DL4
Flat cable to thin round cable,IDC 1485P-K1GK4
Terminating resistors, IDC 1485P-K1TR4
Qty. = 10 pieces
Specifications
Safety Ratings
Certifications UL Recognized
Physical Characteristics
Connector Style Housing:glass-fiber reinenforced PBT cover: PA66
Contact Material Phosphor bronze/nickel substrate
Electrical
Current Capacity 4 A
Voltage 30V DC
Environmental
Enclosure Type Rating IP20
Vibration 1.52 mm (0.06 in.) displacement, 10500 Hz
Operating Temperature [C (F)] -35+55 (-31+131 )
Storage Temperature [C (F)] -35+80 (-31+176 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Accessories
Description Cat. No.Crimping tool for KwikLink Lite
connectors 1485A-KCRIMP
Trunk Line Connector Drop Line Connector
22(0.87)
17.8 (0.70)
17.0(0.67)
30.7 (1.21)
9.5(0.37)
13.8(0.54)
21.3(0.84)
20.0 (0.79)
8.3(0.33)
23(0.91)
Terminating Resistor Flat Media to Round Converter
21.3(0.84)
20.0 (0.79)
8.3(0.33)
23(0.91)
9.2(0.36)
9.5(0.37)
21.3(0.84)
20.0 (0.79)
8.3(0.33)
23(0.91)
9.2(0.36)
9.5(0.37)
-
Dev
iceN
etM
edia
Saf
ety
Co
nnec
tion
Pan
nelC
onn
ect
Co
nnec
tion
Sys
tem
sIn
tro
duc
tion
Qui
ck S
elec
tion
Gen
eral
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P 6-9
DeviceNet Media System
KwikLink Lite Flat MediaFive-Pin Open-Style Connector
Features Insulation displacement connectivity (IDC) Direct connectivity to device with open
style connectivity Connected directly to DeviceNet drop
Product Selection
Description Cat. No.
5-pin open style connector,IDC 1485P-K1G4-Y5
5-pin Linear Plug, Open-style,screw terminal 1799-DNETCON
Available April 2009Qty. = 10 pieces
Accessories
Description Cat. No.Crimping tool for KwikLink Lite
connectors 1485A-KCRIMP
Specifications
Safety Ratings
Certifications UL Recognized
Physical Characteristics
Connector Style Housing: PBT -V0
Contact Material Gold-plated
Electrical
Current Capacity 4 A
Voltage 25V DC
Environmental
Enclosure Type Rating IP20
Vibration 0.75 mm (0.03 in.), 10500 Hz
Operating Temperature [C (F)] -40+100 (-40+212 )
Storage Temperature [C (F)] -40+100 (-40+212 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Open-Style Connector, IDC
38.6 (1.52)
36(1.42)
12.6(0.5)
-
DeviceNet Media System
KwikLink Lite Flat Media
6-10Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Drop Cable
Designed specifically for use with KwikLink,these drop cables come in the mostcommon connection configurations. Alltrunkline connections are 90 micro malewith 4-wire unshielded cable. Deviceconnection options include 5 pin mini andmicro as well as flying leads.
Features Drop cables designed exclusively for use
with KwikLink systems Micro, mini and cable connection Ratcheting coupling nut for vibration
resistance
Product Selection
Description Cat. No.
Straight Micro to Conductor 1485K-PR5-C
Right Angle Micro to Conductor 1485K-PV5-C
Straight Mini to Conductor 1485K-PN5-C
Right Angle Mini to Conductor 1485K-PZ5-C
Replace with 1 (1 m (3.3 ft)), 2 (2 m (6.5 ft)), or 6(6 m (20 ft)).
Note: These drop cables are only for use with theKwikLink flat cable system. They are notsuitable for use with standard DeviceNetround cable systems.
SpecificationsPhysical Characteristics
Coupling Nut Material Epoxy-coated zinc
Connector Material Molded oil-resistant PUR
Contact Material Gold-plated palladium nickel
Cable Type Oil resistant grey PVC jacket, unshielded, 22 AWG powerconductors, 24 AWG signal conductors
Cable Diameter [mm (in.)] 6 (0.24)
Electrical
Current Capacity 4 A
Environmental
Temperature Rating [C (F)] -20+80 (-4+176 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
KwikLink Lite Drop Cordset
Description
Straight Micro Female
127 (5)Approx. 46.9 (1.85)
AInsertMale
Coupling Nut
OvermoldA
Right Angle Micro Female
31.75 (1.25)
31.75(1.25)
Straight Mini Female
127 (5)Approx.
63.5 (2.5)
InsertFemaleCoupling Nut
Overmold
Right Angle Mini Female
43.7(1.72)
45.2(1.78)
-
DeviceNet Media System
KwikLink Lite Flat Media
6-11Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Terminal Block IDC
Features Insulation displacement connectivity (IDC) Includes built-in resistor Provides power communications
Product Selection
Description Cat. No.Terminal block with built-in
resistor 1485P-K1TLR4
Accessories
Description Cat. No.Crimping tool for KwikLink Lite
connectors 1485A-KCRIMP
Specifications
Safety Ratings
Certifications UL Recognized
Physical Characteristics
Connector StyleContact area: phosphor bronze/nickel under plated, gold plated;Terminal area: phosphor bronze/nickel under plated, gold flashplating
Contact Material Phosphor bronze/nickel substrate
Electrical
Current Capacity 4 A
Voltage 30V DC
Environmental
Enclosure Type Rating IP20
Vibration 1.52 mm (0.06 in.) displacement, 10500 Hz
Operating Temperature [C (F)] -35+55 (-31+131 )
Storage Temperature [C (F)] -35+80 (-31+176 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Power Input
20.9(0.82)
28.0 (1.10)
6.0(0.24)
23(0.91)
3.2 (0.13)Dia. x 2
7.0(0.28)
6.0(0.24)
26.1 (1.02)
17.0(0.67)
33.6 (1.32)
29.0(1.14)
13.5(0.53)
16.1(0.63)
31.2(1.23)
V+
V-
V+ V-
-
DeviceNet Flat Media System
KwikLink General Purpose Flat Media
6-12Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Typical Configuration
1. KwikLink General Purpose Flat Trunk Cable.................................6-13
2. KwikLink General Purpose Connector ..........................................6-14
3. Micro Terminator ...............................6-174. Flat Cable End Cap...........................6-175. KwikLink Drop Cable ........................6-15
6. Conduit Adaptor ..............................6-177. Mounting Clamp ..............................6-178. ArmorBlock MaXum.........................10-39. ArmorBlock ......................................10-3
10. Auxiliary Power Cordsets.................6-5511. Standard Cordsets .............................3-1
12. DeviceNet Photoelectric ..........
See the"Sensors"catalog
13. DeviceNet Inductive ..................14. DeviceNet Limit Switch............15. DeviceNet Encoder....................16. Standard Photoelectric ............17. Standard Proximity ....................18. Standard Limit Switch ..............
Enclosure
PLC
DeviceNet PowerSupply
1606-XLSDNET4
-
DeviceNet Media System
KwikLink General Purpose Flat Media
6-13Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Flat Cable Trunk
Class 1 Flat Cable
Class 2 Flat Cable
Auxiliary Power FlatCable
DescriptionClass 1 (CL1) Cable: Per NECspecifications for a Class 1 circuit (see NECArticle 725), the power source must have arated output of less than 30V and 1000V A.So, based on the size of the flat cableconductors, the maximum current throughthe network must be no more than 8 A. Forapplications requiring 8 A in the field, aClass 1 rated flat cable is available.
The Class 1 KwikLink cable is UL Listed for600V and 8 A at 24V DC. For optimalchemical resilience and superior protectionin harsh environments, KwikLink Class 1cable also features a TPE jacket formaximum toughness with excellentflexibility.
Class 2 (CL2) Cable: For less demandingapplications at lower currents, aPVC jacketed Class 2 cable is available.More flexible than the CL 1 cable, thisdesign adheres to NEC Article 725, whichstates that for a Class 2 circuit, the powersource must have a rated output of lessthan 30V and 100V A. In the case ofDeviceNet, running at 24V, the maximumallowable power is then 100V A/24V or 4 A.Therefore, KwikLink CL 2 cable is rated to 4A at 24V DC. This cable can be used withall flat cable connectors.
Auxiliary Power Cable (CL1): In somecases, it may be desirable to run anauxiliary bus to power outputs (i.e. valves,actuators, indicators). To support such anapplication, a black PVC power cable foruse with KwikLink connectors is provided.The KwikLink power cable is a Class 1cable capable of supplying 24V of outputpower with currents up to 8 A. This cablecan be used with all flat cable connectors.
Specifications
Certifications UL Listed and CSA Certified
Cable Type 4-conductor unshielded
Cable Rating
CL1: 4C16, UL TC 600V 75C west sunlight resistant, cUL FT4CL2: 4C16, UL CL2 75C, CSA AWM I/II A/B 80C 300V FT4Auxiliary Power: 4C16, UL TC 600V 75C wet sunlight resistant, cULType CIC TPE FT4
Operating Temperature [C (F)] -25+75 (-13+167 )
Features Physical key to ensure proper connection
alignment Sized to fit inside one inch conduit TPE or PVC jacket material UL Recognized and CSA Certified
Product Selection
Description Assembly Rating Use Jacket Material Color
Cat. No.
75 m Spool 200 m Spool 420 m Spool
5.3(0.21)
19.3 (0.76)
2.5(0.1)
24V DC8 A
(Class 1)DeviceNet Trunk TPE Grey 1485C-P1E75 1485C-P1E200 1485C-P1E420
24V DC4 A
(Class 2)DeviceNet Trunk PVC Light Grey 1485C-P1G75 1485C-P1G200 1485C-P1G420
24V DC8 A
(Class 1)Aux Power Trunk PVC Black 1485C-P1L75 1485C-P1L200 1485C-P1L420
Note: The KwikLink general purpose flat cable is only for use with the KwikLink general purpose connectors and ArmorBlock MaXum flat cable base. It is notsuitable for use with original KwikLink heavy duty connectors.
-
DeviceNet Flat Media System
KwikLink General Purpose Flat Media
6-14Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Specifications
Storage Temperature [C (F)]
Installation Temperature [C (F)] 050 (32122 )
Operating Temperature [C (F)] -25+75 (-13+167 )
Enclosure Type Rating IP67
Vibration 0.35 mm (0.014 in.) displacement @ 10150Hz, 3 planes
Connector Material Cover: Glass filled polyester, type PBTBase: Glass filled nylon, type PA66
Installation Torque 1.11.3 Nm (1012 inlb)
Dimensions 45 x 40 x 32 mm (1.8 x 1.6 x 1.3 in.)
Connectors
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Connector Style Assembly Rating Color Cat. No.
Micro Style 24V DC3 A Black 1485P-K1E4-R5
KwikLink General Purpose
Description
Features Quick, simple installation Simple two piece, low profile housing Rugged, durable construction IP67 rated Designed for single use Integral micro connector
33.0(1.3) 45.1
(1.77)40.0
(1.57)
32.0(1.26)
Allen Bradley KwikLink general purposeconnectors are the next generation of theoriginal KwikLink. The connectors aredesigned to interface drop cables to the flatcable trunkline with optimal plug and playcapability at minimal cost. The KwikLinkgeneral purpose connectors simpletwo piece design results in a low profilehousing and decreases installation time.
The connector snaps onto the flat cable atany point along the trunk. Contact is madewith the cable's four conductors bytightening four screws that drive thecontacts through the cable jacket into theconductors.
These connectors are sealed to IP67requirements and provide a wide workingtemperature range for application flexibility.
KwikLink general purpose connectors,similar to original KwikLink, are designedfor single use only and, once installed,should not be removed from the trunkline.
-
DeviceNet Media System
KwikLink General Purpose Flat Media
6-15Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Drop Cable
SpecificationsCoupling Nut Material Epoxy-coated zinc
Connector Material Molded oil-resistant PUR
Contact Material Gold over nickel-plated brass
Cable Type Oil-resistant grey PVC jacket, unshielded, 22 AWG powerconductors, 24 AWG signal conductors
Cable O.D. 6 mm (0.24 in.)
Temperature Rating [C (F)] -20+80 (-4176 )
Current, Max 3 A
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product SelectionKwikLink Drop Cable Cordsets and Patchcords
Connector Style Dimensions (Diagram)
Cat. No.
1 (3.3) 2 (6.5) 3 (9.8) 4 (13.1) 5 (16.4) 6 (19.7)
Right angle micro toconductor A 1485K-P1F5-C 1485K-P2F5-C 1485K-P4F5-C 1485K-P6F5-C
Right angle micro to strmicro A, B 1485K-P1F5-R5 1485K-P2F5-R5 1485K-P3F5-R5 1485K-P4F5-R5 1485K-P5F5-R5 1485K-P6F5-R5
Right angle micro to rightangle micro A, C 1485K-P1F5-V5 1485K-P2F5-V5 1485K-P3F5-V5 1485K-P4F5-V5 1485K-P5F5-V5 1485K-P6F5-V5
Right angle micro to strmini A, D 1485K-P1F5-N5 1485K-P2F5-N5 1485K-P3F5-N5 1485K-P4F5-N5 1485K-P5F5-N5 1485K-P6F5-N5
Right angle micro to rightangle mini A, E 1485K-P1F5-Z5 1485K-P2F5-Z5 1485K-P3F5-Z5 1485K-P4F5-Z5 1485K-P5F5-Z5 1485K-P6F5-Z5
Additional drop cable configurations are available, contact your local Rockwell Automation sales office or Allen-Bradley distributor for more information.
Note: These drop cables are only for use with the KwikLink flat cable system. They are not suitable for use with the standard DeviceNet round cable systems.
KwikLink Drop Cable
Description
Features Drop cables designed exclusively for use
with KwikLink systems Micro, mini and cable connection Ratcheting coupling nut for vibration
resistance
MaleFemale
Female Male
46.9 (1.85) 49.6 (1.96)
32.96(1.96)
32.1(1.26)
35.6(1.4)
32.1(1.26)
Designed specifically for use with KwikLink,these drop cables come in the mostcommon connection configurations. Alltrunkline connections are 90 micro malewith four wire unshielded cable. Deviceconnection options include five pin miniand micro as well as flying leads.
-
DeviceNet Flat Media System
KwikLink General Purpose Flat Media
6-16Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Micro Auxiliary Power Cordsets & Patchcords
SpecificationsCertifications UL Recognized and CSA Certified
Mechanical
Coupling Nut Material Epoxy-coated zinc
Connector Material Molded PUR
Contact Material Gold over nickel-plated brass
Cable Type Oil-resistant PVC jacket, PVC insulated conductors, 300V
Cable Diameter [mm (in.)] 5 (0.21)
Bend Radius 10 x diameter
Electrical
Cable Rating UL AWM style 2661 VW-1 105C 300V, CSA AWM A/B I/II 80C 300VFT1, UV oil and water resistant
Assembly Rating 250V, 4 A
Environmental
Enclosure Type Rating IP67, NEMA 6P, 1200 psi (8270 kPa) washdown
Temperature Rating [C (F)] -20+105 (-4+221 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Female Connector
Cat. No.
Male Connector
CableStraight Micro (Figure
C)Right Angle Micro
(Figure D)
Cable 889-C2AC-S50 889D-M2AC-K2 889D-E2AC-K2
Straight Micro 889D-F2AC-K2 889D-F2ACDM-K2 889D-F2ACDE-K2
Right Angle Micro 889D-R2AC-K2 889D-R2ACDM-K2 889D-R2ACDE-K2
Replace 50 (length in meters) with 100 or 200 (i.e., 889-C2AC-S100). Replace 2 (2 m) with 5 (5 m) or 10 (10 m) for other standard cable lengths (i.e., 889D-F2AC-K5).Replace 2 (2 m) with 0M3 (1 ft), 1 (1 m), 5 (5 m) or 10 (10 m) for other standard cable lengths (i.e. 889D-
R2ACDE-K0M3).
4-Pin DC Micro Patchcord
Description
Features 22 AWG conductors Highly visible yellow PVC jacket offers
good oil and chemical resistance Ratcheting coupling nuts for vibration
resistance
Right Angle Female Right Angle Male
Straight MaleStraight Female
34.3(1.35)
31.8(1.25)
14(0.56)
31.8(1.25)
14(0.56)
47(1.85)
14(0.56)
50.8(2.0)
14(0.56)
Wiring DiagramsMale
1
-
DeviceNet Media System
KwikLink General Purpose Flat Media
6-17Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Accessories
AccessoriesIn order to support all of the optionsassociated with the flexibility of KwikLink,Rockwell Automation offers an array ofaccessories including cable mounts,conduit adaptors, flat cable end caps, andthreaded plugs for sealing unused microconnectors.
Description Cat. No.
Standalone Flat Cable End Cap 1485A-KCAP
Micro Terminator, Male 1485A-T1D5
Flat Cable Conduit Adapter 1485A-CAD
Flat Cable Mounting Clamp 1485A-FCM
Plastic Sealing Cap (M12) 1485A-M12
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-18Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Typical Configuration
Enclosure
DeviceNet PowerSupply
1606-XLSDNET8
PLC
OpenStyleDevice
OutputDevice
24V DCPower SupplyBulletin 1606
OutputDevice
1. Flat Trunk Cable .................................6-192. Flat Auxiliary Power Cable .................6-193. Splice Kit ............................................6-204. Terminator ..........................................6-215. Connector IDC ...................................6-216. Open Style IDC ..................................6-217. Class 1 Drop ......................................6-228. DevicePort..........................................6-239. KwikLink Drop Cable .........................6-24
10. Terminal Chamber ............................6-2511. Auxiliary Power Drop........................6-2612. Conduit Adaptor...............................6-2813. Flat Cable End Cap..........................6-2814. Mounting Clamp...............................6-2815. Dust Cap ..........................................6-2816. ArmorBlock MaXum.........................10-317. ArmorBlock ......................................10-318. Auxiliary Power Cordsets.................6-5519. Standard Cordsets .............................3-1
20. DeviceNet RightSight................
See the"Sensors"catalog
21. DeviceNet SmartSight 9000...22. DeviceNet Inductive ..................23. DeviceNet Limit Switch............24. DeviceNet Encoder....................25. Standard Limit Switch ..............26. Standard Photoelectric ............27. Standard Proximity ....................
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-19Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Flat Cable Trunk
Specifications
Certifications UL Listed and CSA Certified
Cable Type 4-conductor unshielded
Cable Rating
CL1: 4C16, UL TC 600V 75C west sunlight resistant, cUL FT4CL2: 4C16, UL CL2 75C, CSA AWM I/II A/B 80C 300V FT4Auxiliary Power: 4C16, UL TC 600V 75C wet sunlight resistant, cULType CIC TPE FT4
Operating Temperature [C (F)] -25+75 (-13+167 )
Class 1 Flat Cable
Class 2 Flat Cable
Auxiliary Power FlatCable
Description
Features Physical key to ensure proper connection
alignment Sized to fit inside one inch conduit TPE or PVC jacket material UL Recognized and CSA Certified
Product Selection
Description Assembly Rating Use Jacket Material Color
Cat. No.
75 m Spool 200 m Spool 420 m Spool
5.3(0.21)
19.3 (0.76)
2.5(0.1)
24V DC8 A
(Class 1)DeviceNet Trunk TPE Grey 1485C-P1E75 1485C-P1E200 1485C-P1E420
24V DC4 A
(Class 2)DeviceNet Trunk PVC Light Grey 1485C-P1G75 1485C-P1G200 1485C-P1G420
24V DC8 A
(Class 1)Aux Power Trunk PVC Black 1485C-P1L75 1485C-P1L200 1485C-P1L420
Note: The KwikLink general purpose flat cable is only for use with the KwikLink general purpose connectors and ArmorBlock MaXum flat cable base. It is notsuitable for use with original KwikLink heavy duty connectors.
Class 1 (CL1) Cable: Per NECspecifications for a Class 1 circuit (see NECArticle 725), the power source must have arated output of less than 30V and 1000V A.So, based on the size of the flat cableconductors, the maximum current throughthe network must be no more than 8 A. Forapplications requiring 8 A in the field, aClass 1 rated flat cable is available.
The Class 1 KwikLink cable is UL Listed for600V and 8 A at 24V DC. For optimalchemical resilience and superior protectionin harsh environments, KwikLink Class 1cable also features a TPE jacket formaximum toughness with excellentflexibility.
Class 2 (CL2) Cable: For less demandingapplications at lower currents, aPVC jacketed Class 2 cable is available.More flexible than the CL 1 cable, thisdesign adheres to NEC Article 725, whichstates that for a Class 2 circuit, the powersource must have a rated output of lessthan 30V and 100V A. In the case ofDeviceNet, running at 24V, the maximumallowable power is then 100V A/24V or 4 A.Therefore, KwikLink CL 2 cable is rated to 4A at 24V DC. This cable can be used withall flat cable connectors.
Auxiliary Power Cable (CL1): In somecases, it may be desirable to run anauxiliary bus to power outputs (i.e. valves,actuators, indicators). To support such anapplication, a black PVC power cable foruse with KwikLink connectors is provided.The KwikLink power cable is a Class 1cable capable of supplying 24V of outputpower with currents up to 8 A. This cablecan be used with all flat cable connectors.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-20Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Trunk Splice Kit
Specifications
Storage Temperature [C (F)] -40+85 (-40+185 )
Operating Temperature [C (F)] -25+75 (-13+167 )
Enclosure Type Rating Unsealed: NEMA 1; IP60 (IEC 529)
Vibration 1.5 mm displacement @ 10 500 Hz, 10 G peak, 3 planes
Material Valox
Jacket Material Grey PVC
Dimensions 45 x 49 x 59 mm (1.8 x 1.8 x 2.3 in.)
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Splice Kit
Description
Features Sealed and unsealed versions Connects trunk segments with 8 A current
capacity Standard and power isolation versions Quick, simple installation Includes IDC connectors, splice caps, and
flat cable end caps
IDC Connector (2)
49(1.93)
59(2.32)
0.3 m (1 ft)
Splice Caps
End CapRef. P/N 1485-CAP
59(2.32)
45(1.75)
Connector Style Assembly Rating Wiring Diagram Cable Length
Cat. No.
Unsealed Sealed
Splice Kit
24V DC8 A
V+ (Red) V+ Can-H (White) Can-H Can-L (Blue) Can-L V- (Black) V-
0.3 m (1.0 ft)
1485P-P1H4-S 1485P-P1E4-S
Power Isolation Splice Kit
V+ (No Connection) V+ Can-H (White) Can-H Can-L (Blue) Can-L V- (Black) V-
1485P-P1H4-SX 1485P-P1E4-SX
KwikLink splice kits are used for splicingtogether two sections of a flat cablenetwork. Splice kits are rated for 8 A at 24VDC (Class 1) and come with all the partsnecessary to join sections of flat media. Kitsinclude a pair of snap on KwikLink modulesfactory joined with Class 1 round cable,two IDC connector bases, and two flatcable end caps. Power Isolation versionsare available to allow separation of powersupplies along the network trunkline. Thispermits the connection of multiple powersupplies to the trunk without mutualinterference. Additional information on theIDC connector is found on page 6-21.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-21Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Insulation Displacement Connectors
SpecificationsStorage Temperature [C (F)] -40+85 (-40+185 )
Operating Temperature [C (F)] -25+75 (-13+167 )
Enclosure Type Rating Unsealed: NEMA 1; IP60 (IEC 529)Sealed: NEMA 6P, 13, IP67 and 1200 psi washdown
Vibration 1.5 mm displacement @ 10500 Hz, 10 G peak, 3 planes
Material Valox
Dimensions 45 x 49 x 50 mm (1.8 x 1.8 x 2 in.)
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Connector Style Assembly Rating Connector Material Color
Cat. No.
Unsealed Sealed
Terminator 24V DC8 A
Valox Black
1485A-T1H4 1485A-T1E4
Micro Style 24V DC3 A 1485P-P1H4-R5 1485P-P1E4-R5
Open Style 24V DC8 A 1485P-P1H4-T4
Micro Style IDC
Open Style IDC Terminator
Description
Features Sealed and unsealed versions Quick simple installation Rugged Valox housing Includes interface and IDC module Terminator includes interface, IDC
module, and flat cable end cap
50(1.97)
45(1.75)
36(1.4)
40(1.58)
49(1.93)
The KwikLink Insulation DisplacementConnectors (IDCs) interface drop cables tothe flat cable trunkline with optimalplug and play capability at minimal cost.The hinged, two piece base snaps snuglyaround the flat cable at any point along thetrunk. Contact is made with the cable's fourconductors by tightening two screws thatdrive the contacts through the cable jacketand into the conductors. The upper portionof the IDC provides the connection to thedrop cable and is available in severalversions including micro- and open-styleconnectors. Sealed versions offer NEMA 6Pand 13, IP67 and 1200 psi washdownprotection and feature a wide workingtemperature range (-2575C (-13167F))for outdoor use. The compact Valoxconstruction (roughly two inch square)makes KwikLink IDCs chemically resistantfor use in harsh industrial environments.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-22Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Pigtail DropInsulation Displacement Connectors
Specifications
Storage Temperature [C (F)] -40+85 (-40+185 )
Operating Temperature [C (F)] -25+75 (-13+167 )
Enclosure Type Rating
Sealed: NEMA 6P, 13; IP67 (IEC 529) and 1200 psi (8270 kPa)washdownSealed: NEMA 6P, 13; IP67 (IEC 529) and 1200 psi (8270 kPa)washdown
Vibration 1.5 mm displacement @ 10500 Hz, 10 G peak, 3 planes
Material Valox
Dimensions 45 x 49 x 59 mm (1.8 x 1.8 x 2.3 in.)
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Connector Style Assembly Rating Jacket Material Cable Length
Cat. No.
Unsealed Sealed
Cable Drop
24V DC8 A Grey PVC
1 m (3.2 ft) 1485T-P1H4-B1 1485T-P1E4-B1
2 m (6.5 ft) 1485T-P1H4-B2 1485T-P1E4-B2
3 m (9.8 ft) 1485T-P1H4-B3 1485T-P1E4-B3
6 m (19.6 ft) 1485T-P1H4-B6 1485T-P1E4-B6
Mini-Style Pigtail Drop
1 m (3.2 ft) 1485P-P1H4-B1-N5 1485P-P1E4-B1-N5
2 m (6.5 ft) 1485P-P1H4-B2-N5 1485P-P1E4-B2-N5
3 m (9.8 ft) 1485P-P1H4-B3-N5 1485P-P1E4-B3-N5
6 m (19.6 ft) 1485P-P1H4-B6-N5 1485P-P1E4-B6-N5
Mini Style Pigtail Drop IDC
Cable Drop IDC
Description
Features Sealed and unsealed versions Quick simple installation Rugged Valox housing and PVC cable Includes tap/drop and IDC connection Flying leads or female mini style
connector
49(1.93)
Specified Length
IDC Connector
(Red) V+(Wht) Can -H(Blue) Can -L
(Blk) V-
Tap/Drop Cap
Mini Style Pigtail
Cable Drop59
(2.32)
45(1.75)
59(2.32)
10 (0.39)
The KwikLink pigtail drops are InsulationDisplacement Connectors (IDCs) withintegral Class 1 round cables for interfacingdevices or power supplies to flat cable.These components are Class 1 rated (8 A at24V DC) and are available in multiplelengths for application flexibility. Eachmodel includes both the pigtail dropmodule and the IDC. For additionalinformation on the IDC, see page 6-21.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-23Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
DevicePort
Specifications
Storage Temperature [C (F)] -40+85 (-40+185 )
Operating Temperature [C (F)] -25+70 (-13+158 )
Enclosure Type Rating NEMA 4, 6P and 1200 psi (8270 kPa), 3.5 GPM, (60C) 140Ftemperature washdown; IP67 (IEC 529)
Vibration 30120 Hz
Shock 5 g
Material Chemical resistant black polymer
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Male Connector Female Connector No. of Ports Cat. No.
2 m Cable
Micro
4 1485P-P4R5-C2
8 1485P-P8R5-C2
Micro4 1485P-P4R5-D5
8 1485P-P8R5-D5
Right Angle Micro (2 m pigtail)4 1485P-P4R5-C2-F5
8 1485P-P8R5-C2-F5
Other DevicePort configurations are also available (page 6-50).
4- and 8-Port DevicePorts with Cable Drop
Description
Features Passive Sealed (NEMA 6P) 4-port or 8-port Drop cable Micro quick-disconnect
59.3(2.37)
47.6(1.87)
5-pin fixed internal threadmicro female connector 5.5 (0.22) Dia.
98.4 (3.87)
29.6(1.06)
44.4(1.75)
187.3 (7.37)
87.5 (3.5)
DevicePort taps are passive multiport tapswhich connect via a drop cable. DevicePorttaps are offered with four or eightquick disconnect ports in sealed versionsto connect up to eight physical nodes.
Using DevicePort reduces the number ofphysical taps on the trunk line from asmany as eight taps to one. All deviceconnections are micro female receptacles.Only micro male connectors with rotatingcoupling nuts can interface with each port.Allen Bradley micro style DeviceNet dropcables are recommended.
Micro DevicePort taps come standard withsealing caps for all ports. If replacementsealing caps are required, order Cat. No.1485A-C3.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-24Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Drop Cable
SpecificationsCoupling Nut Material Epoxy-coated zinc
Connector Material Molded oil-resistant PUR
Contact Material Gold over nickel-plated brass
Cable Type Oil-resistant grey PVC jacket, unshielded, 22 AWG powerconductors, 24 AWG signal conductors
Cable O.D. 6 mm (0.24 in.)
Temperature Rating [C (F)] -20+80 (-4+176 )
Current, Max 3 A
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product SelectionKwikLink Drop Cable Cordsets and Patchcords
Connector Style Dimensions (Diagram)
Cat. No.
1 (3.3) 2 (6.5) 3 (9.8) 4 (13.1) 5 (16.4) 6 (19.7)
Right Angle Micro toConductor A 1485K-P1F5-C 1485K-P2F5-C 1485K-P4F5-C 1485K-P6F5-C
Right Angle Micro toStraight Mini A, B 1485K-P1F5-R5 1485K-P2F5-R5 1485K-P3F5-R5 1485K-P4F5-R5 1485K-P5F5-R5 1485K-P6F5-R5
Right Angle Micro to RightAngle Micro A, C 1485K-P1F5-V5 1485K-P2F5-V5 1485K-P3F5-V5 1485K-P4F5-V5 1485K-P5F5-V5 1485K-P6F5-V5
Right Angle Micro toStraight Mini A, D 1485K-P1F5-N5 1485K-P2F5-N5 1485K-P3F5-N5 1485K-P4F5-N5 1485K-P5F5-N5 1485K-P6F5-N5
Right Angle Micro to RightAngle Mini A, E 1485K-P1F5-Z5 1485K-P2F5-Z5 1485K-P3F5-Z5 1485K-P4F5-Z5 1485K-P5F5-Z5 1485K-P6F5-Z5
Additional drop cable configurations are available. Contact your local Rockwell Automation sales office or Allen Bradley distributor for more information.
Note: These drop cables are only for use with the KwikLink flat cable system. They are not suitable for use with standard DeviceNet round cable systems.
Description
Features Drop cables designed exclusively for use
with KwikLink systems Micro, mini and cable connection Ratcheting coupling nut for vibration
resistance
MaleFemale
Female Male
46.9 (1.85) 49.6 (1.96)
32.96(1.96)
32.1(1.26)
35.6(1.4)
32.1(1.26)
KwikLink Drop Cable
Designed specifically for use with KwikLink,these drop cables come in the mostcommon connection configurations. Alltrunkline connections are 90 micro malewith four wire unshielded cable. Deviceconnection options include five-pin straightmini and micro, as well as flying leads.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-25Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Terminal Chambers
Specifications
Coupling Nut Material Micro: Nickel-plated brass; Mini: Anodized aluminum
Connector Shell Material Nylon
Contact Material Gold-plated palladium/nickel
Enclosure Type Rating NEMA 6; IP67 (IEC 529)
Operating Temperature [C (F)] -40+90 (-40+194 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product SelectionThin Trunk or Drop Cable Terminal Chambers
Connector Style Connection Type Cat. No.
Straight Micro 871A-TS5-DM1
Straight Micro 871A-TS5-D1
Right Angle Micro Male 871A-TR5-DM1
Right Angle Micro Female 871A-TR5-D1
Straight Mini 871A-TS5-NM1
Straight Mini 871A-TS5-N1
Straight Female Micro StyleTerminal Chamber
Description
Features Field installable Straight and right angle 5 pin terminal
chambers Mini and micro versions Screw terminal installation
80 (3.2)7.8-16 UN-2A
27(1.0)
51 (2.0)
20(0.79)
M12 x 1
Mini Style Male
Micro Style Male Micro Style Female
Mini Style Female
Micro Right Angle MaleMicro Right Angle Female
54 (2.1)
M12 x 1
20(0.79)
32 (1.3)
20(0.79)
20(0.79)
35 (1.4)
81 (3.2)
27(1.0)
7.8-16 UN-2B
Terminal chambers are passive field-installable connectors. The five pin microstyle and five pin mini style terminalchambers are designed for use withDeviceNet systems. These connectorscontain screw terminals for quick and easyinstallation and are sized for use withDeviceNet thin cables. Other versions arealso available for use with thick cable, seepage 6-37.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-26Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Micro Auxiliary Power Cordsets & Patchcords
Specifications
Certifications UL Recognized and CSA Certified
Mechanical
Coupling Nut Material Epoxy-coated zinc
Connector Material Molded PUR
Contact Material Gold over nickel-plated brass
Cable Type Oil-resistant PVC jacket, PVC insulated conductors, 300V
Cable Diameter [mm (in.)] 5 (0.21)
Bend Radius 10 x diameter
Electrical
Cable Rating UL AWM style 2661 VW-1 105C 300V, CSA AWM A/B I/II 80C 300VFT1, UV oil and water resistant
Assembly Rating 250V, 4 A
Environmental
Enclosure Type Rating IP67, NEMA 6P, 1200 psi (8270 kPa) washdown
Temperature Rating [C (F)] -20+105 (-4+221 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Product Selection
Female Connector
Cat. No.
Male Connector
Cable Straight Micro (Figure C) Right Angle Micro (Figure D)
Cable 889-C2AC-S50 889D-M2AC-K2 889D-E2AC-K2
Straight Micro 889D-F2AC-K2 889D-F2ACDM-K2 889D-F2ACDE-K2
Right Angle Micro 889D-R2AC-K2 889D-R2ACDM-K2 889D-R2ACDE-K2
Replace 50 (length in meters) with 100 or 200 (i.e., 889-C2AC-S100). Replace 2 (2 m) with 5 (5 m) or 10 (10 m) for other standard cable lengths (i.e., 889D-F2AC-K5).Replace 2 (2 m) with 0M3 (1 ft), 1 (1 m), 5 (5 m) or 10 (10 m) for other standard cable lengths (i.e. 889D-R2ACDE-K0M3).
4-Pin DC Micro Patchcord
DescriptionKwikLink auxiliary power micro drops arestandard DC micro cordsets andpatchcords designed to interface betweenKwikLink micro style connectors andAllen Bradley distributed I/O products withmicro power connection. The application-specific wiring allows for quick and simpleconnection of auxiliary power to suchdevices as ArmorBlock eight-pointproducts and ArmorBlock MaXum withmicro base. These products may also beconnected directly to DeviceNet microdrops to provide power without disruptingnetwork communications.
Features 22 AWG conductors Highly visible yellow PVC jacket offers
good oil and chemical resistance Ratcheting coupling nuts for vibration
resistance
Wiring DiagramsMale
1
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-27Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Auxiliary Power Insulation Displacement Connectors
Specifications
Cable Temperature [C (F)] -25+75 (-13+167 )
Enclosure Type Rating NEMA 6P, 13; IP67 (IEC 529) and 1200 psi (8270 kPa) washdown
Vibration 1.5 mm displacement @ 10500 Hz, 10 G peak, 3 planes
Material Valox
Cable Type Oil resistant yellow PVC jacket, 16 AWG stranded copper, 600V, ULRecognized and CSA Certified, STOOW-A
Dimensions 45 x 49 x 59 mm (1.8 x 1.8 x 2.3 in.)
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Wiring
Device End Flat Cable
Black (pin 1) Black
White (pin 2) Blue
Red (pin 3) Red
Green (pin 4) White
Product Selection
Description
Features Designed for interfacing auxiliary power
connections Quick simple installation Rugged Valox housing and PVC cable Includes tap/drop and insulation
displacement connection Flying leads or female mini style
connector
49(1.93)
Specified Length
IDC Connector
(Red) V+(Wht) Can -H(Blue) Can -L
(Blk) V-
Tap/Drop Cap
Mini Style Pigtail
Cable Drop59
(2.32)
45(1.75)
59(2.32)
10 (0.39)
Connector Style Assembly Rating Connector End Cable Length Cat. No.
Cable Drop
24V DC8 A
Yellow STOOW PVC Cable
1 m (3.28 ft) 1485T-P1E4-C1
2 m (6.5 ft) 1485T-P1E4-C2
3 m (9.8 ft) 1485T-P1E4-C3
6 m (19.7 ft) 1485T-P1E4-C6
Mini Style Pigtail Drop
1 m (3.28 ft) 1485T-P1E4-C1-N4
2 m (6.5 ft) 1485T-P1E4-C2-N4
3 m (9.8 ft) 1485T-P1E4-C3-N4
4-pin mini female 6 m (19.7 ft) 1485T-P1E4-C6-N4
KwikLink Auxiliary Power pigtail drops areInsulation Displacement Connectors (IDC)with integral yellow STOOW round cablesfor connecting auxiliary power to outputdevices or hardened I/O platforms such asArmorBlock MaXum or FlexArmor.These components are Class 1 rated (8 A at24V DC) and are available in multiplelengths for application flexibility. Eachmodel includes both the pigtail dropmodule and the IDC. Additional informationon the IDC can be found on page 6-21.
-
DeviceNet Media System
KwikLink Heavy Duty Flat Media
6-28Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Accessories
In order to support all of the optionsassociated with the flexibility of KwikLink,Rockwell Automation offers an array ofaccessories including cable mounts,conduit adaptors, flat cable end caps, andthreaded plugs for sealing unused microconnectors.
Description Cat. No.
Kwiklink Module Dust Cap 1485A-C5E4
Flat Cable Conduit Adapter 1485A-CAD
Flat Cable Mounting Clamp 1485A-FCM
Plastic Sealing Cap (M12) 1485A-M12
Micro Sealing Cap 1485A-C3
Flat Cable End Cap for KwikLink 1485A-CAP
Description
-
DeviceNet Media System
IntroductionRound Media
6-29Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Thick Trunk Typical Configuration
1. Thick Trunk Cable .............................6-312. Terminator .........................................6-403. T-Port.................................................6-414. Power Tap .........................................6-455. DeviceBox .........................................6-466. DevicePort........................................6-33
7. Thin Drop Cable...............................6-338. ArmorBlock MaXum.........................10-39. Standard Cordsets.............................3-1
10. Auxiliary Power Cordsets.................6-5511. Auxiliary Power Tee..........................6-6112. Open Terminator...............................6-53
12. DeviceNet Photoelectric ..........
See the"Sensors"catalog
13. DeviceNet Inductive ..................14. DeviceNet Limit Switch............15. DeviceNet Encoder....................16. Standard Limit Switch ..............17. Standard Photoelectric ............18. Standard Proximity ....................
1
2
3
4
5
1
1
1
3
6
7
8
10
11
99
10
7
12
1315
16
1817
7
7
8
7
19
7
13
14
3 3
1
10
14
14
DeviceNet Power Supply
PLCEnclosure
Output Device
24V DC Power Supply
Output Device
-
DeviceNet Media System
IntroductionRound Media
6-30Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Thin Trunk Typical Configuration
DeviceNet Power Supply
PLCEnclosure
Output Device
24V DC Power Supply
Output Device
Open StyleDevice
1
1
1
1
1
111
1
2
1
7
1
1
1
4
3
6
5
8
89
12
10
13
11
11
1415
16
10
13
10
3
8
1. Thin Drop Cable .................................6-552. Terminator ..........................................6-603. T-Port..................................................6-614. Power Tap ..........................................6-455. DeviceBox ..........................................6-46
6. DevicePort..........................................6-557. ArmorBlock MaXum...........................10-38. Standard Cordsets ...............................3-19. Open Terminator.................................6-53
10. DeviceNet Photoelectric ..........
See the"Sensors"catalog
11. DeviceNet Inductive ..................12. DeviceNet Limit Switch............13. DeviceNet Encoder....................14. Standard Limit Switch ..............15. Standard Photoelectric ............16. Standard Proximity ....................
-
DeviceNet Media System
Cordsets & Patchcords, Round Media Cable Spools
6-31Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Thick Trunk Cable
Specifications
Certifications UL Recognized and CSA Certified
Mechanical
Coupling Nut Material Epoxy-coated zinc
Jacket Material Grey PVC
No. of Conductors 1 pair 15 AWG, 1 pair 18 AWG, and drain
Contact Material Gold-plated machined brass
Cable Diameter [mm (in.)] Thick: 12.2 (0.48); ODVA Type V: 13.5 (0.53)
Bend Radius 10 x diameter
Electrical
Cable Rating
Thick: UL-Type PLTC 300V or CM 75 C (167 F) or AWM style2464, CSA- AWM I/II A/B 80 C (176 F) 300V FT1, Class 2 TypeThick Flex Rated: UL-Type PLTC 75C or AWM 80C 600V, CSAAWM I/II A/B 80C 600V, FT4 Oil Res IIODVA Type V, Open-Wiring Compliant: UL 600V TC-ER 75C SunlightResistant, c(UL) AWM I/II A/B 75C 600V FT1ODVA Type V Cable: Type V Trunk Cable, UL 600V Type TC-ERSunlight Resistant 75 C Dry Open Wiring, CSA AWM I/II A/B 75 C600V FT1, Oil Resistant, Class 1 Type
Assembly Rating Thick: 300V, 8 A (4A NEC)
Environmental
Enclosure Type Rating NEMA 1, 2, 3, 4, 6P, 12, 13; IP67; 1200 psi (8720 kPa) washdown
Cable Temperature [C (F)] -20+70 (-15+158 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Thick Trunk Cable
Mini to Mini Thick Patchcord
Description
Features PVC jacket offers good oil and chemical
resistance Watertight connections (NEMA 4, 6P;
IP67; IP69K) Gold-plated contacts Ratcheting coupling nut for vibration
resistance Flex rated cable designed to handle five
million cycles on a roll test
61.8 (2.43)61.8 (2.43)
45.2(1.75)
27(1.06)
43.7 (1.72)43.7 (1.72)
Figure BRight Angle Female
Figure AStraight Female
Figure DRight Angle Male
Figure CStraight Male
27(0.16)
Example of Cordset Example of Patchcord
45.2(1.78)
Rockwell Automation thick trunk cable isavailable in raw spools as well as specifiedlengths with any of several connectorspreattached. Cordsets and patchcords areprewired and factory molded to assurereliable connection. The thick trunk cablesprovide a rugged and durable foundationfor DeviceNet systems. Although typicallyused in thick trunk systems as trunklineonly, thick cable can also be used forDeviceNet drops. CL1 600V rated ODVAType V cable is also available in spools only.ODVA Type V cable provides greaterflexibility in applications requiring highervoltage jacket ratings.
-
DeviceNet Media System
Cordsets & Patchcords, Round Media Cable Spools
6-32Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Thick Trunk Cable
Pinout and Color Code
Product SelectionThick Cable
Female Connector
Cat. No.
Male Connector
Cable Straight Mini (Figure C) Right Angle Mini (Figure D)
Cable 1485C-P1-A50 1485C-P1M5-C 1485C-P1W5-C
Mini Straight (Figure A) 1485C-P1N5-C 1485C-P1N5-M5 1485C-P1W5-N5
Mini Right Angle (Figure A) 1485C-P1Z5-C 1485C-P1M5-Z5 1485C-P1W5-Z5
Flex-Rated Thick Cable
Female Connector
Cat. No.
Male Connector
Cable Straight Mini (Figure C) Right Angle Mini (Figure D)
Cable 1485C-F1A50 1485C-F1M5-C 1485C-F1W5-C
Mini Straight (Figure A) 1485C-F1N5-C 1485C-F1N5-M5 1485C-F1W5-N5
Mini Right Angle (Figure A) 1485C-F1Z5-C 1485C-F1M5-Z5 1485C-F1W5-Z5
Replace 50 (50 m (164ft)) with 150 (150 m (492 ft)), 300 (300 m (984 ft)), or 500 (500 m (1640 ft)). Replace 1 (desired length in meters (i.e. 1485C-P1N5-M5 for a 1 m (3.28 ft) cable) with 2 m (6.56 ft), 3 m (9.8 ft), 4 m (13 ft), 5 m (16.4 ft), 6 m (19.7 ft), 8 m (26
ft), 10 m (32.8 ft), 12 m (39 ft), 18 m (59 ft), 24 m (78.7 ft), 30 m (98 ft) for standard cable lengths.Note: Stainless steel versions may be ordered by adding S to the cat. no. (e.g., 1485CS-P1N5-M5).
To order a red DeviceNet cable, replace P with R in the cat. no. (e.g., 1485C-P1N5-C becomes 1485C-R1N5-C).
ODVA Type V Cable
Description Cat. No.
Cable Spool 1485C-P1BS75
Replace 75 (75 m (246 ft)) with 200 (200 m (656 ft)) or 420 (420 m (1378 ft)) for other standard lengths.Note: Distance performance of this cable type is limited to that of flat cable.
ColorCode
Face View Pinout
Mini Connector
Female Male
1 Drain 4 White (CAN_H)2 Red (V+) 5 Blue (CAN_L)
3 Black (V-)
-
DeviceNet Media System
Cordsets & Patchcords, Round Media Cable Spools
6-33Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Thin Trunk Cable
Specifications
Certifications UL Recognized and CSA Certified
Mechanical
Coupling Nut Material Epoxy-coated zinc
Jacket Material Yellow CPE (chemical resistant) or grey PVC
No. of Conductors 1 pair 22 AWG, 1 pair 24 AWG and drain
Contact Material Mini: Gold plated machined brass; Micro: Gold over nickel platedbrass
Cable Diameter [mm (in.)] 6.9 (0.27)
Bend Radius 10 x diameter
Current, Max 4 A
Electrical
Cable Rating
Grey PVC: UL CL2 or CMG 75 C (167 F) or AWM 600V or c(UL)CMG or AWM I/II 80 C (176 F) 300V FT4;Grey High-Flex PVC: UL CL2 75 C (167 F) or AWM 20201 80 C(176 F) 600V or CSA AWM I/II 80 C (176 F) 600V FT4;Yellow CPE: UL- CL2 or CM 75 C (167 F) or AWM 20869 80 C(176 F), CSA- AWM I/II A/B 80 C (176 F) 300V FT4 Oil Res II
Assembly Rating 250V, 4 A
Environmental
Enclosure Type Rating NEMA 1, 2, 3, 4, 6P, 12, 13; IP67; 1200 psi (8720 kPa) washdown
Cable Temperature [C (F)] -20+70 (-15+158 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Thin Cable
Mini to Mini Thin Cordset
Description
Features Grey PVC jacket for standard applications
and yellow CPE jacket for moredemanding environments
Water tight performance to a rating ofIP67
Inserts are securely bonded to theconnector body for superior side load andpull out resistance
Gold-plated contacts for corrosionresistance
Ratcheting coupling nut for vibrationresistance
61.8 (2.43)61.8 (2.43)
45.2(1.75)
27(1.06)
43.7 (1.72)43.7 (1.72)
Figure BRight Angle Female
Figure AStraight Female
Figure DRight Angle Male
Figure CStraight Male
27(1.06) 45.2
(1.78)
Figure FRight Angle Female
Figure EStraight Female
Figure HRight Angle Male
Figure GStraight Male
47 (1.85)
14(0.56)
14(0.56)
14(0.56)
14(0.56)
31.8(1.25)
50.8 (2.0)34.3
(1.35)
31.8(1.25)
Rockwell Automation offers thin cable inspools and pre-molded DeviceNet cables invarious lengths for use as trunk or drops.Designed in a heavy duty,chemical resistant yellow CPE jacket, orstandard grey PVC jacket, these cableshave been designed specifically for harshindustrial environments including thoseapplications involving dirt, oil, and fluids.The molded construction and gold-platedconnector pins make for reliableconnections that are impervious to mostexternal contaminants.
-
DeviceNet Media System
Cordsets & Patchcords, Round Media Cable Spools
6-34Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
General
Quick S
election
Introd
uction
Co
nnection
System
sP
annelCo
nnectS
afetyC
onnectio
nD
eviceNet
Med
ia
Thin Trunk Cable
Pinout and Color Code
Product SelectionGrey PVC Thin Cable
Female Connector
Cat. No.
Male Connector
CableMini Straight(Figure C)
Mini Right Angle(Figure D)
Micro Straight(Figure G)
Micro Right Angle(Figure H)
Cable 1485C-P1CG50 1485G-P1M5-C 1485G-P1W5-C 1485G-P1D5-C 1485G-P1F5-C
Mini Straight (Figure A) 1485G-P1N5-C 1485G-P1N5-M5 1485G-P1W5-N5 1485G-P1D5-N5 1485G-P1N5-F5
Mini Right Angle (Figure B) 1485G-P1Z5-C 1485G-P1M5-Z5 1485G-P1W5-Z5 1485G-P1D5-Z5 1485G-P1F5-Z5
Micro Straight (Figure E) 1485G-P1R5-C 1485G-P1M5-R5 1485G-P1W5-R5 1485G-P1R5-D5 1485G-P1R5-F5
Micro Right Angle (Figure F) 1485G-P1V5-C 1485G-P1M5-V5 1485G-P1W5-V5 1485G-P1D5-V5 1485G-P1F5-V5
Yellow CPE Thin Cable
Female Connector
Cat. No.
Male Connector
CableMini Straight(Figure C)
Mini Right Angle(Figure D)
Micro Straight(Figure G)
Micro Right Angle(Figure H)
Cable 1485C-P1C50 1485R-P1M5-C 1485R-P1W5-C 1485R-P1D5-C 1485R-P1F5-C
Mini Straight (Figure A) 1485R-P1N5-C 1485R-P1N5-M5 1485R-P1W5-N5 1485R-P1D5-N5 1485R-P1N5-F5
Mini Right Angle (Figure B) 1485R-P1Z5-C 1485R-P1M5-Z5 1485R-P1W5-Z5 1485R-P1D5-Z5 1485R-P1F5-Z5
Micro Straight (Figure E) 1485R-P1R5-C 1485R-P1M5-R5 1485R-P1W5-R5 1485R-P1R5-D5 1485R-P1R5-F5
Micro Right Angle (Figure F) 1485R-P1V5-C 1485R-P1M5-V5 1485R-P1W5-V5 1485R-P1D5-V5 1485R-P1F5-V5
Flex-Rated Grey PVC Thin Cable
Female Connector
Cat. No.
Male Connector
CableMini Straight(Figure C)
Mini Right Angle(Figure D)
Micro Straight(Figure G)
Micro Right Angle(Figure H)
Cable 1485C-F1G50 1485G-F1M5-C 1485G-F1W5-C 1485G-F1D5-C 1485G-F1F5-C
Mini Straight (Figure A) 1485G-F1N5-C 1485G-F1N5-M5 1485G-F1W5-N5 1485G-F1D5-N5 1485G-F1N5-F5
Mini Right Angle (Figure B) 1485G-F1Z5-C 1485G-F1M5-Z5 1485G-F1W5-Z5 1485G-F1D5-Z5 1485G-F1F5-Z5
Micro Straight (Figure E) 1485G-F1R5-C 1485G-F1M5-R5 1485G-F1W5-R5 1485G-F1R5-D5 1485G-F1R5-F5
Micro Right Angle (Figure F) 1485G-F1V5-C 1485G-F1M5-V5 1485G-F1W5-V5 1485G-F1D5-V5 1485G-F1F5-V5
Replace 50 (50 m (164ft)) with 150 (150 m (492 ft)), 300 (300 m (984 ft)), or 600 (600 m (1968 ft)) for other standard lengths. Replace 1 (desired length in meters (i.e. 1485C-P1N5-M5 for a 1 m (3.28 ft) cable) with 2 m (6.56 ft), 3 m (9.8 ft), 4 m (13 ft), 5 m (16.4 ft), or 6 m (19.7 ft) for
standard cable lengths.Note: Stainless steel versions may be ordered by adding S to the cat. no. (e.g., 1485RS-P1M5-C). To order a red DeviceNet cable, replace P with R in the cat.
no. (e.g., 1485C-P1N5-C becomes 1485C-R1N5-C).
ColorCode
Face View Pinout
254
31254
31
Mini Connector Micro Connector
Female Male Female Male
1 Drain 4 White (CAN_H)2 Red (V+) 5 Blue (CAN_L)
3 Black (V-)
-
DeviceNet Media System
Receptacles, Round Media
6-35Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
Gen
eral
Qui
ck S
elec
tion
Intr
od
uctio
nC
onn
ectio
nS
yste
ms
Pan
nelC
onn
ect
Saf
ety
Co
nnec
tion
Dev
iceN
etM
edia
Thick and Thin Cable
Specifications
Certifications UL Recognized and CSA Certified
Mechanical
Material Thick: Grey PVC; Thin: Grey PVC or Yellow CPE
Jacket Material Thick: Grey PVC; Thin: Grey PVC or Yellow CPE
No. of Conductors Thick: 1 pair 15 AWG, 1 pair 18 AWG, and drain;Thin: 1 pair 22 AWG, 1 pair 24 AWG, and drain
Contact Material Mini: Gold-plated machined brass; Micro: Gold over nickel platedbrass
Cable Diameter [mm (in.)] Thick: 12.2 (0.48); Thin: 6.9 (0.27)
Bend Radius 10 x diameter
Current, Max Thick: 8 A (4A NEC); Thin: 3 A
Electrical
Cable Rating
Thick: UL-Type PLTC 300V or CM 75 C (167 F) or AWM style 2464,CSA- AWM I/II A/B 80 C (176 F) 300V FT1;Thin, Grey PVC: UL- CM 75 C (167 F) or AWM 2464, CSA- SWM IIA/B 80 C (176 F) 300V FT4;Thin, Yellow CPE: UL- CL2 or CM 75 C (167 F) or AWM 2086980 C (176 F), CSA- AWM I/II A/B 80 C (176 F) 30
Assembly Rating Thick: 300V, 8 A (4 A NEC); Thin: (250V, 4 A
Environmental
Enclosure Type Rating NEMA 1, 2, 3, 4, 6P, 12, 13; IP67, 1200 psi (8720 kPa) washdown
Operating Temperature [C (F)] -20+70 (-15+158 )
Approximate DimensionsDimensions are in millimeters (inches). Illustrations are not drawn to scale.
Mini Female Thin Receptacle
DescriptionRockwell Automation receptacles areavailable with either thick or thin cablestyles in specified lengths. Receptaclesprovide a simple rugged means of thru-panel wiring.
Features Thick or thin cable types 1/2 inch-14 NPT mounting threads Rugged single piece construction
34.2 (1.35)34.2 (1.35)
Figure AMini Female Receptacle
Figure BMini Male Receptacle
3.43(0.13)
1/2 inch NPT
22 (0.87)
1/2 inchNPT
25.4 (1.0) Dia.
Figure DFigure C
25.4 (1.0)
12.7 (0.5)
22.2 (0.87)
1/2 inch NPT Threads
25.4 (1.0)
12.7 (0.5)
23.8 (0.94)
22.2 (0.88) dia.
TypicalKnockout
23.8 (0.94)
1/2 inch NPT
Mating Components & AccessoriesIn order to support all of the optionsassociated with t