luhfw 6olp %hdp - startek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk...

6
© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com 6OLP %HDP 'LUHFW Type: Project: Page 1 - 3/28/2020 FEATURES · Continuous lensing standard –runs up to 200’ · Extruded aluminum single piece housing · 4’ and 8’ individual units, or continuous rows · Straight runs with proprietary joiner design · Efficacy up to 141 lm/W · Soft diffuse direct lighting · Textured powder coat finishes available in white, black, silver and bronze · Premium finishes also available · Approved for dry and damp locations · 0-10v dimming is standard · Dim to 1% of output current is standard LUMEN PACKAGES Based on 3500K CCT. Other CCT available. DIMENSIONS MODEL LUMENS INPUT WATTS Lm/W SLIMD-8-500-35K 4,000 29 138 SLIMD-8-1000-35K 8,000 60 134 SLIMD - - - - - SERIES - LENGTH - LUMENS PER FOOT - DISTRIBUTION - CCT (80+ CRI) - FINISH SLIMD 4=4FT 350=350LPF SD=SatinIce Diffuse 30K=3000K PW=Powder Coat White PBR=Powder Coat Bronze 8=8FT 500=500LPF WD=Wide Diffuse 35K=3500K PB=Powder Coat Black PSFx=Premium Stock Finish (See Pg. 5) XX=Run Length 750=750LPF WW=Wall Wash 40K=4000K PS=Powder Coat Silver PO=Powder Coat Other* 1000=1000LPF 50K=5000K XXXX=Custom LPF TW=Tunable White 1 *Factory to be supplied with RAL# or color chip - - - - MOUNTING** - VOLTAGE - OPTIONS ACW05=Aircraft Cables w/ Canopy, White Cord 5’ U= 120v-277v CRI9050=Minimum 90 CRI (R9 50) DM=Daylight/Motion Sensor ACW10=Aircraft Cables w/ Canopy, White Cord 10’ C= 347v #EM=Emergency Circuit #EMB6=6W EM Battery ACB05 =Aircraft Cables w/ Canopy, Black Cord 5’ #EMB10=10W EM Battery #EMB15=15W EM Battery ACB10 =Aircraft Cables w/ Canopy, Black Cord 10’ GTD=Generator Transfer Device PSRD=Philips Sensor Ready (DALI) Driver ALW05= Aircraft Cables w/ Loop, White Cord 5’ PSTP=Philips Step Dimming Driver ALW10= Aircraft Cables w/ Loop, White Cord 10’ DT1=eldoLED EcoDrive Dim to 1% (0-10V) ALB05 = Aircraft Cables w/ Loop, Black Cord 5’ DTZ=eldoLED SoloDrive Dim to 0% (0-10V) ALB10 = Aircraft Cables w/ Loop, Black Cord 10’ TW-EL=eldoLED DUALdrive Tunable White (DALI) 1 SM=Surface Mount LDE1=Lutron Hi-Lume EcoSystem LED driver with Soft-on, FadetoBlack dimming AWM= Architectural Wall Mount PSQ02U=Lutron T-Series 1% 2-Channel Tunable White driver 1 WM=Wall Mount VDO=Lutron Vive Integral fixture control (RF with daylight and occupancy sensing) EXAMPLE: SLIMD-40-625-WD-35K-PW-ACW10-U-1EMB10 ORDERING LOGIC 1 Tunable White Driver must be specified in options ** See mounting details on page 2 2.0” 3.5”

Upload: others

Post on 02-Aug-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 1 - 3/28/2020

FEATURES

· Continuous lensing standard –runs up to 200’

· Extruded aluminum single piece housing

· 4’ and 8’ individual units, or continuous rows

· Straight runs with proprietary joiner design

· Efficacy up to 141 lm/W

· Soft diffuse direct lighting

· Textured powder coat finishes available in white,

black, silver and bronze

· Premium finishes also available

· Approved for dry and damp locations

· 0-10v dimming is standard

· Dim to 1% of output current is standard

LUMEN PACKAGES Based on 3500K CCT. Other CCT available.

DIMENSIONS

MODEL LUMENS INPUT WATTS Lm/W

SLIMD-8-500-35K 4,000 29 138

SLIMD-8-1000-35K 8,000 60 134

SLIMD - - - - -

SERIES - LENGTH - LUMENS PER FOOT - DISTRIBUTION - CCT (80+ CRI) - FINISH

SLIMD 4=4FT 350=350LPF SD=SatinIce Diffuse 30K=3000K PW=Powder Coat White PBR=Powder Coat Bronze

8=8FT 500=500LPF WD=Wide Diffuse 35K=3500K PB=Powder Coat Black PSFx=Premium Stock Finish (See Pg. 5)

XX=Run Length 750=750LPF WW=Wall Wash 40K=4000K PS=Powder Coat Silver PO=Powder Coat Other*

1000=1000LPF 50K=5000K

XXXX=Custom LPF TW=Tunable White1 *Factory to be supplied with RAL# or color chip

- - -

- MOUNTING** - VOLTAGE - OPTIONS

ACW05=Aircraft Cables w/ Canopy, White Cord 5’ U= 120v-277v CRI9050=Minimum 90 CRI (R9 50) DM=Daylight/Motion Sensor

ACW10=Aircraft Cables w/ Canopy, White Cord 10’ C= 347v #EM=Emergency Circuit #EMB6=6W EM Battery

ACB05 =Aircraft Cables w/ Canopy, Black Cord 5’ #EMB10=10W EM Battery #EMB15=15W EM Battery

ACB10 =Aircraft Cables w/ Canopy, Black Cord 10’ GTD=Generator Transfer Device PSRD=Philips Sensor Ready (DALI) Driver

ALW05= Aircraft Cables w/ Loop, White Cord 5’ PSTP=Philips Step Dimming Driver

ALW10= Aircraft Cables w/ Loop, White Cord 10’ DT1=eldoLED EcoDrive Dim to 1% (0-10V)

ALB05 = Aircraft Cables w/ Loop, Black Cord 5’ DTZ=eldoLED SoloDrive Dim to 0% (0-10V)

ALB10 = Aircraft Cables w/ Loop, Black Cord 10’ TW-EL=eldoLED DUALdrive Tunable White (DALI)1

SM=Surface Mount LDE1=Lutron Hi-Lume EcoSystem LED driver with Soft-on, Fade‑to‑Black dimming

AWM= Architectural Wall Mount PSQ02U=Lutron T-Series 1% 2-Channel Tunable White driver1

WM=Wall Mount VDO=Lutron Vive Integral fixture control (RF with daylight and occupancy sensing)

EXAMPLE: SLIMD-40-625-WD-35K-PW-ACW10-U-1EMB10

ORDERING LOGIC

1 Tunable White Driver must be specified in options ** See mounting details on page 2

2.0”

3.5”

Page 2: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 2 - 3/28/2020

MOUNTING OPTIONS

ACxxx (Aircraft Cable with Canopy) - Drywall, Solid, Tile (On-Grid), Tile (Off-Grid)

AWM (Architectural Wall Mount) SM (Surface Mount) WM (Wall Mount)

ALxxx (Aircraft Cable with Loops)

Page 3: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 3 - 3/28/2020

ROW CONFIGURATIONS

Each starter fixture will be provided with (2) mounting supports. Each additional fixture will be provided with (1) support which can be located anywhere along the 2nd half of the fixture (highlighted):

MOUNTING LOCATIONS

WIRING STANDARDS (Per NEC Requirements)

Each fixture will be manufactured with 300v,14ga AWG mains wiring.

Dependent on the length of the run, fixtures ordered with cords will be provided with the following (based on 12w/ft):

Up to 160’ 18/3-22/2

Up to 160’ w/NL 18/4-22/2

Over 160’ 14/5

Over 160’ w/NL 14/6

*347V fixtures will be provided with 600V cables as required

The standard construction of run lengths is to build with as many 8’ sections as possible and finish the run with a shorter length fixture if necessary. If a different configuration is needed to meet an aesthetic requirement, please indicate this on your P.O. when placing your order.

Examples of the standard construction of runs over 8’ are as follows:

ϭϬΖ�ZhE ϴ Ϯ

ϭϲΖ�ZhE ϴ ϴ

ϮϬΖ�ZhE ϴ ϴ ϰ

ϮϮΖ�ZhE ϴ ϴ ϲ

ϮϴΖ�ZhE ϴ ϴ ϴ ϰ

Page 4: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 4 - 3/28/2020

PERFORMANCE

SLIMD-X-750-WD (80+ CRI)

SLIMD-X-750-SD (80+ CRI)

Model Lumens Watts LPW

SLIMD-4-750-WD-30K 3,000 24 122

SLIMD-4-750-WD-35K 3,000 24 125

SLIMD-4-750-WD-40K 3,000 23 128

SLIMD-4-750-WD-50K 3,000 22 133

Model

SLIMD-8-750-WD-30K

SLIMD-8-750-WD-35K

SLIMD-8-750-WD-40K

SLIMD-8-750-WD-50K

Lumens

6,000

6,000

6,000

6,000

Watts

46

45

44

43

LPW

130

133

136

141

Model Lumens Watts LPW

SLIMD-4-750-SD-30K 3,000 24 122

SLIMD-4-750-SD-35K 3,000 24 125

SLIMD-4-750-SD-40K 3,000 23 128

SLIMD-4-750-SD-50K 3,000 22 133

Model

SLIMD-8-750-SD-30K

SLIMD-8-750-SD-35K

SLIMD-8-750-SD-40K

SLIMD-8-750-SD-50K

Lumens

6,000

6,000

6,000

6,000

Watts

46

45

44

43

LPW

130

133

136

141

SLIMD-4-750-SD-35K

SLIMD-4-750-WD-35K

Page 5: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 5 - 3/28/2020

FINISHES

PREMIUM STOCK FINISHES

PSF001 (WOOD#1) PSF002 (WOOD#2) PSF003 (WOOD#3)

PSF004 (WOOD#4) PSF005 (WOOD#5) PSF006 (WOOD#6)

PSF007 (STONE #1) PSF008 (STONE #2) PSF009 (METAL #1)

STANDARD FINISHES

NOTE: A minimal impact to lead times will apply to products specified with Premium Stock Finishes (PSF). It is not to be assumed that these finishes are stocked in our warehouse, but rather, are readily available to us for your project.

All other custom finishes (PO) will incur a set up fee and will add an extended lead time to your project.

BLACK MINI TEXTURE WHITE MINI TEXTURE SILVER SPARKLE TEXTURE BRONZE SPARKLE TEXTURE

Page 6: LUHFW 6OLP %HDP - StarTek · 6olp %hdp 'luhfw 7\sh 3urmhfw 3djh 52: &21),*85$7,216 (dfk vwduwhu il[wxuh zloo eh surylghg zlwk prxqwlqj vxssruwv (dfk dgglwlrqdo il[wxuh zloo eh surylghg

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6OLP�%HDP 'LUHFW

Type:

Project:

Page 6 - 3/28/2020

Housing Nominal 2” x 3 1/2” square housing of continuous extruded 6063 T5 aluminum.

Color Colors for the housing are available in a powder coat-ed white, black, silver, bronze and woodgrain with end cap to match. Consult factory for custom colors.

Luminaire Length 4' or 8' lengths are available for a single stand-alone section. Using internal joiners, 4’ and 8’ sections can be joined to form longer rows.

End Caps Injection molded flat end caps are mechanically attached with no exposed fasteners to enhance ar-chitectural aesthetic and prevent light leak (woodgrain is standard in metal).

Source Lumen packages are available in four color tem-perature options (3000K, 3500K, 4000K and 5000K) — all within 2.5 MacAdam ellipses.

Certification

Intertek cETLus Listed. DLC Premium listed options are available. RoHS (Restriction of Hazardous Substances) and Buy American Act compliant.

Battery Philips Bodine lithium ion battery providing up to 780lm(6W) or up to 1300lm(10W) for 90 minutes. UL924 listed. Class 2 compliant. Meets Title 20 CEC (California Energy Commission) efficiency stand-ards.

SPECIFICATIONS

CONTROL

Sensor

Wattstopper FS-205 v2 Low Voltage PIR. Integrated photosensor for hold-off daylighting control. 24VDC operating voltage. Adjustable time delay (30 seconds to 30 minutes).

WARRANTY

COMPANION

5-year limited warranty. Complete warranty terms can be located at: http://www.starteklightingamerica.com/images/pdf/warranty/Beam_Series_Warranty.pdf Note: Actual performance may differ as a result of installation environment and final application. All values are design or typical values, measured under laboratory conditions, at 25°C (77°F) .

Environment Suitable for dry and damp locations. Operating temp.: -40°C to +50°C -40°F to +122°F

Dimming Driver Universal Lighting Technologies (ULT) Everline series of LED drivers allows tunable output currents to achieve infinite configurations of output. UL Class 2 recognized. 0-10v interface can be wired as Class 1 or Class 2 circuit. Included 2.5Kw ring and wave overcurrent protection, isolation of each individual output and a fully potted driver to protect from heat and vibration. Power factor <.93

Packaging

Sustainably manufactured outside cardboard box and biodegradable, protective poly-foam luminaire inserts.

Slim Beam Direct/Indirect