lub-oil
TRANSCRIPT
What is an Oil Flush?
After setting the system up for a high velocity flush by removing all restrictions to flow (using an external flush pump and filter) oil will be flushed through the lube oil system at approximately 3-6 times its normal flow rate. This high volume of oil will remove scale and particulate from the piping and flush it back to the main oil reservoir where it will be filtered. Thermal shocks to the system will greatly enhance the cleaning process. The high velocity flush is for the purpose of cleaning the system. Super clean oil is simply a by-product of that process that eliminates the need to replace the old turbine oil or the disposal of that oil there by saving thousands of dollars plus the peace of mind in knowing that you have a super clean system and super clean oil.
High Velocity Turbine Lube Oil Flushing
Benchmark Services has the capability of performing high velocity turbine lube oil system flushes up to 5,000 gpm on your steam or gas powered turbine with the most extensive variety of oil flushing equipment in the industry!
After setting the system up for a high velocity lube oil flush by removing all restrictions to flow, oil will be flushed through the lube oil system at approximately 3-5 times its normal flow rate using an external flush pump and filter. This high volume of oil will remove scale and particulate from the piping and flush it back to the main oil reservoir where it will be filtered. Thermal shocks to the system will greatly enhance this cleaning process. The high velocity flush is for the purpose of cleaning the system. Super clean oil is simply a by-product of that process that eliminates the need to replace the old turbine oil or the disposal of that oil thereby saving thousands of dollars plus the peace of mind in knowing that you have a super clean system and super clean oil. An ounce of prevention is worth tons in forced outage.
Benchmark Services has performed high velocity turbine lube oil flushing on turbines manufactured by General Electric, Westinghouse, Siemens, ABB, Alstom, Mitsubishi, Toshiba, Fuji, Solar, and many others.
IN ADDITION TO TURBINE-GENERATOR LUBE OIL SYSTEMS, EHC IS THE LEADER IN ULTRA HIGH VELOCITY ANCILLARY SYSTEMS FLUSHING
PROCEDURES. ANCILLARY SYSTEMS ARE AS FOLLOWS:
H2 GENERATOR SEAL OIL SYSTEMS EXCITER SUPPLY AND RETURN LOOPS
FD & ID FAN LUBRICATION SYSTEMS
PULVERIZER LUBRICATION SYSTEMS
LUBE OIL STORAGE AND TRANSFER SYSTEMS
AIR COOLED LUBE OIL COOLER SUPPLY AND RETURN LOOPS
MHC SERVO VALVE SUPPLY AND RETURN LOOPS
BOILER FEED PUMP TURBINE LUBRICATION SYSTEMS
FUEL OIL SYSTEMS
ALL HYDRAULIC AND LUBE OIL SYSTEMS FROM 1 INCH TO 12 INCH PIPING INSIDE DIAMETER
ADVANTAGE OF ULTRA HIGH VELOCITY LUBE AND CONTROL OIL FLUSHING PROCEDURES IN STEAM, GAS AND NUCLEAR TURBINE-GENERATORS:
CLEANER, FASTER RESULTS THAN NON ULTRA HIGH VELOCITY
FLUSHING PROCEDURES ELIMINATE CATASTROPHIC FAILURE DUE TO LUBE AND
CONTROL OIL CONTAMINATION BETWEEN SCHEDULED
MAINTENANCE OUTAGES
ASSURE CLEANLINESS OF LUBE AND CONTROL OIL SYSTEM UPON INITIAL START-UP OF NEW UNITS AS WELL AS AFTER
SCHEDULED MAINTENANCE OUTAGES
ASSURE PROPER OPERATION OF LUBE AND CONTROL SYSTEM EQUIPMENT OF NEW UNITS AS WELL AS AFTER SCHEDULED
MAINTENANCE OUTAGES
RETURN DAMAGED UNITS TO NORMAL LUBE AND CONTROL
SYSTEM OPERATION AFTER FORCED OUTAGES
REDUCE WEAR RATE AND FAILURE OF HYDROGEN SEALS DUE TO LUBE OIL CONTAMINATION
*********************************************************
EHC ADVANTAGE OVER COMPETITORS:
SUPERIOR TECHNOLOGY TO COMPETITIVE NON ULTRA HIGH
VELOCITY PROCEDURES PROJECT MANAGEMENT WITH EACH PROCEDURE
EQUIPMENT OPERATIONAL TRAINING FOR CLIENT PERSONNEL
WITH EACH PROJECT
WRITTEN OPERATIONAL AND FLUSH PROCEDURE WITH EACH PROJECT
Ultra High Velocity Flow Methodology, available only from EHC Field Services, Inc., is a proprietary proven technology for the superior cleaning of Recirculating Lubrication and Hydraulic Systems on all high speed rotating machinery!
EHC PROVIDES THE FOLLOWING CUSTOM SERVICES:
SPECIFY AND FURNISH EQUIPMENT
PROCEDURAL OPERATIONAL CONTROL DOCUMENTS
EXPERT CONSULTATION (ON AND OFF SITE)
EXPERT PROBLEM SOLVING (ON AND OFF SITE)
EXPERT RESULTS EVALUATION (INDEPENDENT)
This well maintained,Ultra High Velocity Lube Oil Flushing System is complete right down to interconnecting gaskets and fasteners and ready to work for you. One E-mail or Phone Contact and you're on your way to a successful High Velocity Lube Oil Flush Procedure on any Gas, Coal or Nuclear Turbine-Generator, regardless of MW capacity or Turbine Manufacturer.
Filtration that is easily visually inspected. **********************************************************
ASK ABOUT RENTAL OF THIS EQUIPMENT WITH WRITTEN PROCEDURE! **********************************************************
OUR INVENTORY AND EXPERTISE IS LOCATED NEAR THE ATLANTA, GEORGIA METRO AREA FOR QUICK DELIVERY TO PLANT SITES ANYWHERE IN THE USA AND INTERNATIONALLY!
PHONE: 1-866-308-6299