lt3521cwhz-hys0 rev02 승인원 151112 - lumimicro · 2016. 4. 25. · rev.02 customer approval...
TRANSCRIPT
REV.02
Customer Approval
Checked By
Written By
Approved By
Approved byChecked By
Model
Issued Date
Description
LT3521CWHZ-HYS0
2015 -11-12
SMD Type LED
Contact PointTel : 82-31-213-9200Fax : 82-31-213-9210Homepage : www.Lumimicro.com
SPECIFICATIONPKG MODEL : LT3521CWHZ-HYS0
Http://www.lumimicro.com 1/16
REV.02
1. Description
1) Feature2) Part No3) Outline Dimensions4) Recommend Solder Pattern5) LED Circuit Diagram
2. Absolute Maximum Ratings
3. Characteristics
1) Electro / Optical Characteristics2) Color Coordinates Rank3) Luminous Intensity Rank4) VF Rank5) RANK[Bin] Description
4. Typical Characteristics
5. Reliability Test Items & Conditions
6. Soldering Contentions
7. Packing
1) Taping Dimensions2) Reel Dimensions3) Packing Spec4) Label Spec
8. Precaution For Use
9. Revision History
Contents
Http://www.lumimicro.com 2/16
REV.02
1. Description
1) Feature
. Built-in 1 chip White Colored LED
. Pb-free Reflow Soldering Application
. Rohs Compliant
. External dimensions: 3.5 x 2.8 x 1.9T mm
2) Part No
: LUMIMICRO.Ltd
: Top View LED(SMD Type)
: Package Size (3.5*2.8*1.9T 2 Pin)
: Chip Quantity
: Polarity ( A : Anode / C : Cathode)
: White Color
: Built in Zener (X : NO ZENER / Z : ZENER)
: Identity Code
3) Outline Dimensions
4) Recommend Solder Pattern 5) LED Circuit Diagram
LUMIMICRO LED Part No. Explanation
L
Z
T
WH
352
1
C
HYS0
Part No : LT3521CWWZ-HYS0
Unit : mm, Tolerance : 0.1
(1) Anode
(2) Cathode
(+)
(-)
Http://www.lumimicro.com 3/16
REV.02
2. Absolute Maximum Ratings
VR-1
3. Characteristics
1) Electro / Optical Characteristics
Tolerance : VF=±0.2V , Iv=±10% , Chromaticity Coordinate=±0.005
2) Color Coordinates Rank
- 0.2110
Symbol
Parameter
TypMinCondition
Forward Current
100
Symbol Value
30IF
Tstg
TsldSoldering Temperature
Storage Temperature
mcd
-
260 (for 10 sec)
Pd
IF = 2mA
IF = 2mA
mA
-40 ~ +100
-40 ~ +100Topr
60
Unit
IF = 2mA
*1: Forward Pulse Current : Pulse Width < 10msec / Duty Ratio < 1/10
UnitMax
mA
mW
Forward Pulse Current *1 IPF-1
Operating Temperature
Power Dissipation
v
V2.50 -
1/2
-
120 deg.
Cy
Reverse Voltage 5 V
Forward Voltage
Junction Temperature Tj 125
Cx 0.1967 0.2113 -
Parameter
IF = 2mA
-
VF 2.90
Chromaticity Coordinates0.1950
12179
Viewing Angle
Luminous Flux
4K5A
0.1900
0.1950
0.2000
0.2050
0.2100
0.2150
0.1900 0.1950 0.2000 0.2050 0.2100 0.2150
WH
Http://www.lumimicro.com 4/16
REV.02
3) Color Coordinates Table
4) Luminous Intensity Rank
5) VF Rank
6) RANK[Bin] Description
CCT Rank Iv Rank VF Rank
WH L2 2V7
RANK Name
Rank MIN. MAX.
L1 79 100
L2 100 121
IvUnit
[mcd]
@2mA
Rank MIN. MAX. Unit
2V6 2.5 2.6
2V7 2.6 2.7
2V8 2.7 2.8
2V9 2.8 2.9
[V]
@ 2mA
0.2013 0.2110
0.2113 0.2110
0.2067 0.1950
0.1967 0.1950
WH
Http://www.lumimicro.com 5/16
REV.02
4. Typical Characteristics
0
5
10
15
20
25
30
1 1.5 2 2.5 3 3.5
Fo
rwa
rdC
urr
ent(
mA
)
Forward Voltage(V)
Forward Currnet vs. Forward Current
0
0.25
0.5
0.75
1
-90 -60 -30 0 30 60 90
Rel
ativ
eIn
ten
sity
(%)
Angular Displacement(degrees)
Radiation Pattern
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
0 5 10 15 20 25 30
Rel
ati
veL
um
ino
sity
(a.u
)
Forward Current(mA)
Forward Current vs. Relative Luminosity
0
5
10
15
20
25
30
35
0 20 40 60 80 100
Fo
rwa
rdC
urr
ent
(mA
)
Ambient Temperature
Forward Current vs. Ambient Temperature
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
380 430 480 530 580 630 680 730 780
Rel
ati
ve
Inte
nsi
ty(a
.u)
Wavelength (nm)
Wavelength vs. Relative Luminosity
Http://www.lumimicro.com 6/16
REV.02
5. Reliability Test Items & Conditions
Test Item
*) ; Tested with LUMIMICRO standard circuit board
Failure Criteria
U.S.L*) ; Upper Standard Level
L.S.L*) ; Lower Standard Level
Luminous Intensity IV L.S.L*)×0.7 -
ITEM SYMBOLFailure Criteria
MIN MAX
Forward Voltage VF - U.S.L*)×1.1
10High temperature storage life test
(HTSL) JESD22-A103Ta = 100 °C. 1000 hrs 30
11Low temperature storage life test
(LTSL) JESD22-A103Ta = -40 °C. 1000 hrs 30
8Vibration Variable Frequency
(VVF) JESD22 B-103
0.06 inch displacement, 20 to 100 Hz,
50 g 100 Hz to 2kHz, 1 time 30
9Thermal Shock
(MIL883-2007)-45°C/125°C, 30 min.dwell, <10 second transfer 1000 cycle 30
6Steady state life test
(SSLT) JESD22-A108Ta = 100°C If = 20mA 1000 hrs 77
7ESD
JESD22-A114HBM : 100pF / 1.5kohm > ±2KV / 3 times 2000 V 30
4Power Temp. Cycling
(PTC) JESD22-A105-40/+125°C, If = 20mA on/off = 5min 1000 hrs 30
5Steady state life test
(SSLT) JESD22-A108Ta = -40°C If = 20mA 1000 hrs 77
77
3Temperature cycle
(TC) JESD22-A104-40°C/+125°C 15min each extreme 1000 cycle 77
# Tested
1Resistance to soldering heat
(RTSH) JESD22-A113Reflow soldering 260°C 3 times 30
No TEST Item Test ConditionDuration /
Cycle
2Temperature & humidity bias
(T&HB) JESD22-A101Ta = 85°C, R.H.= 85% If = 20mA 1000 hrs
Http://www.lumimicro.com 7/16
REV.02
6. Soldering conditions
1) Reflow Conditions ( With Pb )
Preliminary heating to be at 150°C max. for 2 minutes max.
Soldering heat to be at 240°C max. for 10 seconds max.
Recommended Solder Paste : Alloy- 63Sn/37Pb Model: OL107B,
2) Pb free Reflow Conditions
Preliminary heating to be at 170°C max. for 2 minutes max.
Soldering heat to be at 260°C max. for 10 seconds max.
Recommended Pb free Paste Alloy: 96.5Sn/3Ag/0.5Cu. - Model: OL204
3) For Manual Soldering
Not more than 5seconds @MAX300°C, under soldering iron
Max 120 ~ 150 C
Max 240 C
120sec.Max
10sec.Max
Time
Temp.
Max 150 ~ 170 C
Max 260 C
90 ~120sec.Max
10sec.Max
Time
Temp.
Http://www.lumimicro.com 8/16
REV.02
7. Packing
1) Taping pocket Dimension
2) Reel Dimensions
3) Packing Spec
One Reel Unit Tolerance
0.1mmMax 2,000 EA
< Aluminum Bag > < In Box >< Reel >
Http://www.lumimicro.com 9/16
REV.02
. Aluminum Bag
. Box Spec
4) Label Spec
8. Precaution For Use
Reel in a Bag
In Box 222* 142 * 215
Dimension(Width/Thickness) Unint : mm InBox in Out Box Goods QNT in a Bag
7 14,000
Aluminum Bag 1 Reel 1 Silica, 1 Indicator Max : 2,000ea
Out Box 470 * 250 *470 6 84,000
Dimension(Width/Thickness) Unint : mm
Silica in a Bag Goods QNT in a Bag
Reel in Box Goods QNT in a Bag
This device should not be used in any type of fluid such as water, oil, organic solvent, etc When
washing is required, IPA should be used.
When the LEDs are illuminating, operating current should be decided after considering the ambient
maximum temperature.
LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3months or more after
being shipped from LUMIMICRO, sealed container with a nitrogen atmosphere should be used for
storage.
The LEDs must be dip soldered within seven days after opening the moisture-proof packing. Repack
unused Products with anti-moisture packing, fold to close any opening and then store in dry place.
LUMIMICRO made LEDs use a silver-plated lead frame. Siver plating can be affected by sulfur(S), or
other halogen compound. Sulfurization of lead frame may cause operational degradation. It requires
caution Repack unused Products with anti-moisture packing, fold to close any opening and then store in
dry place.
The appearance and specifications of the product may be modified for improvement without notice.
These LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or
anti electrostatic glove when handling the LEDs. If Over voltage which exceeds the absolute maximum
rating is applied to LEDs, it will cause damage in LEDs and result in destruction. Damaged LEDs will
show some unusual characteristics such as remarkably increased leak current, turn-on voltage becomes
lower and the LEDs get unlighted at low current.
Http://www.lumimicro.com 10/16
REV.02
9. Hazard Substance Analysis
Http://www.lumimicro.com 11/16
REV.02
Http://www.lumimicro.com 12/16
REV.02
Http://www.lumimicro.com 13/16
REV.02
Http://www.lumimicro.com 14/16
REV.02
Http://www.lumimicro.com 15/16
REV.02
10. Revision History
Kim.T.G
Kim.T.G
Kim.T.GJ.J.Jang
ApprovedDate Revision History
Writer
Drawn
2015.09.22
(REV.00)
2015.11.11
(REV.01)
Preliminary Choi.Y.S
RANK
2015.11.12
(REV.02)J.J.JangRANK
Http://www.lumimicro.com 16/16