LT-3600RF

LED RGB Controller

LT-3600RF (Common Anode)

12～24V DCInput Voltage:

6A × 3CH Max Current Load:

216W/432W(12V/24V)Max Output Power:

100mRF Remote Distance:

433.92MHzRadio Frequency:

L211×W40×H30(mm)Dimensions:

8mWRemote Output Power:

L313×W50×H32(mm)Package Size:

240gWeight (G.W.):

1. Technical Specs:

Working Temp.: -30 ~ 55℃ ℃

warranty5 years

2. Product Size:

LT-3600RF is a multi-functional RGB LED controller, use the advanced PWM (Pu se-Width Modulation) control technique, built-in 32 kinds of changing mode. Smooth changing effect without flicker; PC engineering plastic shell, exquisite appearance. The receiver has 8 keys,

which are used for namely ON/OFF, PAUSE, MODE+/-, SPEED+/-, BRT+/-, compatible with RF remote (100m control distance). 12~24V DC wide voltage input, 3CH output (common anode), widely used for all kinds of LEDs with current-limiting resistor, like RGB LED modules, LED strips, SMD and so on.

l

RF Remote Control 1

LT-3600RF LED RGB Controller

4. Table of Changing Modes

No. No. No.

12345678

91011

12

13141516171819202122

23242526272829303132

Modes Modes Modes

Note: Brightness is adjustable for static effect, brightness/speed are adjustable for changing effect.

3. Detailed Key Functions：

On/Off

Pause KeyMode Keys Speed Keys

Brightness Keys

12~24V Power Input Socket

DC LED Lamps Connection Socket

Other Functions:

B. Press MODE+ for 3s to auto loop play all the modes.

C. Press MODE- for 3s to 4 scene modes. merely play the changing modes, the static color will be skipped.

D. Press SPEED+ for 3s, all speed change is restored to default status.

E. Press SPEED- for 3s, the current change is restored to default status.

A. Press PAUSE in 3s, the buzzer can be on or off.

ID Learning Method:Learning ID:

Cancelling ID:

Press “On/Off” key on the receiver for 3s, the buzzer long beep and the green light will be on, release the key, press any button on the remote, when the green light turns off means activated.

Press "On/Off" key on the receiver for 5s, the buzzer long beep, the green light will be on and flash once, meanwhile press any button on the remote, when the green light flashes several times means ID cancelled (do not release the "On/Off" key during the process).

8 function keys on the receiver, which is corresponding to the first 8 buttons on the RF remote: namely ON/OFF, PAUSE, MODE+, MODE-, SPEED+, SPEED-, BRT+, BRT-.

On/OffMode+Speed+

Brightness+ Brightness-

Pause

4 Scene-mode Keys

(Press 3s and save)

Mode-Speed-

2

LT-3600RF LED RGB Controller

Red Yellow Color Smooth

Green Cyan Color Smooth

Blue purple Color Smooth

Green Yellow Color Smooth

Blue Cyan Color Smooth

Red Purple Color Smooth

Blue White Color Smooth

Yellow Purple Cyan Color Smooth

RGB Color Smooth

Full-color Smooth

Red Fade out and Fade in

Green Fade out and Fade in

Blue Fade out and Fade in

Yellow Fade out and Fade in

Purple Fade out and Fade in

Cyan Fade out and Fade in

White Fade out and Fade in

RGB Fade out and Fade in

Red Green Color Smooth

Red Blue Color Smooth

Green Blue Color Smooth

Static Red

Static Green

Static Blue

Static Yellow

Static Purple

Static Cyan

Static White

RGB Skipping

7 Colors Skipping

White Strobe

7 Colors Strobe

5. Wiring Diagram:

5.1 Connected to LED RGB strips:

5.2 Working with power repeater (Connected to LED RGB strips as an example):

RGB Strip 72W/5m

3

LT-3600RF LED RGB Controller

6. Attention:

7. Warranty Agreement:

6.1 The product shall be installed and serviced by the qualified person.

6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.

6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.

6.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the product.

6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

6.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.

7.4 Any amendment or adjustment to this warranty must be approved in writing by COMI only.

★ This manual only applies to this model. COMI reserves the right to make changes without prior notice.

7.1 We provide lifelong technical assistance with this product:

A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and cover manufacturing faults only.

For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.

7.2 Warranty exclusions below:

Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.

The product appears to have excessive physical damage.

Damage due to natural disasters and force majeure.

Warranty label, fragile label and unique barcode label have been damaged.

The product has been replaced by a brand new product.

7.3 Repair or replacement as provided under this warranty is the exclusive remedy to thecustomer. COMI shall not be liable for any incidental or consequential damages for breachof any stipulation in this warranty.

4 Update Time: 2016.01.05

LT-3600RF LED RGB Controller