lp0805 high performance low pass filterdatasheets.avx.com/avx-lp0805hp.pdf · 2020-06-04 · 072317...
TRANSCRIPT
1072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
0700
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H0700ASTR
FEATURES• Small size: 0805• Frequency: 700MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking 2
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
2 072317
P/N Frequency I.Loss R.Loss Attenuation@ 700MHz @ 700MHz
-35dB at 1400MHzLP0805H0700ASTR 700MHz -0.4dB max. -20dB -30dB at 2100MHz
-30dB at 2800MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H0700ASTR
3072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
0780
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H0780ASTR
FEATURES• Small size: 0805• Frequency: 780MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking 4
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
4 072317
P/N I.Loss R.Loss Attenuation@ 780MHz @ 780MHz
-35dB at 1560MHzLP0805H0780ASTR -0.4dB max. -20dB -40dB at 2340MHz
-20dB at 3120MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H0780ASTR
5072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
0942
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H0942ASTR
FEATURES• Small size: 0805• Frequency: 942MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking 6
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
6 072317
P/N I.Loss R.Loss Attenuation@ 942MHz @ 942MHz
-35dB at 1884MHzLP0805H0942ASTR -0.4dB max. -20dB -40dB at 2826MHz
-35dB at 3768MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H0942ASTR
7072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
1000
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H1000ASTR
FEATURES• Small size: 0805• Frequency: 1000MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking Z
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
8 072317
P/N I.Loss R.Loss Attenuation@ 1000MHz @ 1000MHz
-35dB at 2000MHz
LP0805H1000ASTR -0.7dB max. -20dB-40dB at 3000MHz-35dB at 4000MHz-30dB at 5000MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H1000ASTR
9072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
1250
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H1250ASTR
FEATURES• Small size: 0805• Frequency: 1250MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking 7
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
10 072317
P/N I.Loss R.Loss Attenuation@ 1250MHz @ 1250MHz
-20dB at 1750MHz
LP0805H1250ASTR -0.7dB max. -25dB-35dB at 2500MHz-40dB at 3750MHz-30dB at 5000MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H1250ASTR
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
1800
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H1800ASTR
FEATURES• Small size: 0805• Frequency: 1800MHz • Sharp attenuation slope • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
11072317
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking B
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
12 072317
P/N Frequency I.Loss R.Loss Attenuation@ 1800MHz @ 1800MHz
-35dB at 2520MHzLP0805H1800ASTR 1800MHz -0.8dB max. -25dB -35dB at 3600MHz
-25dB at 5400MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H1800ASTR
13072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
1900
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H1900ASTR
FEATURES• Small size: 0805• Frequency: 1900MHz • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking B
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
14 072317
P/N Frequency I.Loss R.Loss Attenuation@ 1900MHz @ 1900MHz
-35dB at 2660MHzLP0805H1900ASTR 1900MHz -0.75dB max. -20dB -35dB at 3800MHz
-25dB at 5700MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H1900ASTR
15072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
2400
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H2400ASTR
FEATURES• Frequency: 2400MHz • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking D
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
16 072317
P/N Frequency I.Loss R.Loss Attenuation@ 2400MHz @ 2400MHz
-30dB at 3360MHzLP0805H2400ASTR 2400MHz -0.9dB max. -30dB -25dB at 4800MHz
-30dB at 7200MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H2400ASTR
17072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
2900
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H2900ASTR
FEATURES• Frequency: 1700-2900MHz • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking V
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
18 072317
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H2900ASTR
P/N I.Loss R.Loss Attenuation@ 2900MHz @ 2900MHz
-30dB at 4060MHzLP0805H2900ASTR -1dB max. -20dB -30dB at 5800MHz
-35dB at 6500MHz
ELECTRICAL CHARACTERISTICS
19072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
3500
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H3500ASTR
FEATURES• Small size: 0805• Frequency: 3500MHz • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking R
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
20 072317
P/N Frequency I.Loss R.Loss Attenuation@ 3500MHz @ 3500MHz
-35dB at 4900MHzLP0805H3500ASTR 3500MHz -0.85dB max. -20dB -30dB at 7000MHz
-30dB at 10500MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H3500ASTR
21072317
ITF TECHNOLOGYThe ITF SMD Filter is based on thin-film multilayer technology. Thetechnology provides a miniature part with excellent high frequencyperformance and rugged construction for reliable automatic assembly.The ITF Filter is offered in a variety of frequency bands compatible withvarious types of high frequency wireless systems.
LP
Series
0805
Size
H
Type
4000
Frequency(MHz)
A
Sub-Type
S
Termination
TR
Taped &Reeled
HOW TO ORDER
LP0805 High Performance Low Pass FilterLP0805H4000ASTR
FEATURES• Frequency: 4000MHz • Characteristic impedance: 50Ohm• Operating / Storage temp: -40°C – +100°C• Low profile • Rugged construction• Taped and reeled• Power handling: 8W
APPLICATIONS• Mobile communications• Satellite TV receivers• GPS• Vehicle location systems• Wireless LAN’s
RECOMMENDED PAD LAYOUT mm (inches
FINAL QUALITY INSPECTIONFinished parts are 100% tested for electrical parametersand visual/mechanical characteristics. Each productionlot is evaluated on a sample basis for:
• Static Humidity: 85°C, 85% RH, 160 hours• Endurance: 125°C, IR, 4 hours
TERMINATIONNickel/ Lead free Solder coating (Sn100) compatible withautomatic soldering technologies: reflow, wave soldering,vapor phase and manual.
WBL
T
A
DIMENSIONS (Top View) mm (inches)
L 2.03±0.10(0.080±0.004)
W 1.55±0.10(0.061±0.004)
T 0.80±0.10(0.031±0.004)
A 0.56±0.25(0.022±0.010)
B 0.35±0.15(0.014±0.006)
F 2.50±0.05(0.098±0.002)
G 1.50±0.05(0.059±0.002)
J 0.19±0.05(0.007±0.002)
K 3.48±0.05(0.137±0.002)
M 0.54±0.25(0.021±0.010)
N 4.48±0.05(0.776±0.002)
P 0.25±0.05(0.010±0.002)
R 0.85±0.05(0.033±0.002)
D 0.60±0.05(0.024±0.002)
Orientation Marking 3
IN
OUT
GND
GND
TERMINALS AND LAYOUT (Top View)
22 072317
P/N Frequency I.Loss R.Loss Attenuation@ 4000MHz @ 4000MHz
-40dB at 5600MHz
LP0805H4000ASTR 4000MHz -0.8dB max. -20dB-35dB at 8000MHz-35dB at 10000MHz-25dB at 12000MHz
ELECTRICAL CHARACTERISTICS
TYPICAL ELECTRICAL PERFORMANCE
LP0805 High Performance Low Pass FilterLP0805H4000ASTR