lorentz ps4000
DESCRIPTION
pompe immergée lorentzTRANSCRIPT
Head max. 16 mFlow rate max. 62 m³/h
Controller PS4000▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)
Power max. 4,0 kWInput voltage max. 375 VOptimum Vmp* > 238 VMotor current max. 15 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure class IP54
Motor ECDRIVE 4000-C▪ Maintenance-free brushless DC motor▪ Water filled▪ Premium materials, stainless steel: AISI 304/316▪ No electronics in the motor
Rated power 3,5 kWEfficiency max. 92 %Motor speed 900...3 300 rpmInsulation class FEnclosure class IP68Submersion max. 250 m
Pump End PE C-SJ42-2▪ Non-return valve▪ Premium materials, stainless steel: AISI 304
Standards2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.
Pump Unit PU C-SJ42-2 (Motor, Pump End)Borehole diameter min. 6,0 inWater temperature max. 50 °C
Technical Data
System Overview
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ42-2
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Controller
A =B =C =D =E =S =
736 mm245 mm491 mm96 mm147 mm3 in
Pump Unit
Net weight
Controller 9,0 kg
Pump Unit 20 kg
Motor 10 kg
Pump End 10 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
Dimensions and Weights
Pump Chart Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ42-2
Head max. 10 mFlow rate max. 79 m³/h
Controller PS4000▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)
Power max. 4,0 kWInput voltage max. 375 VOptimum Vmp* > 238 VMotor current max. 15 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure class IP54
Motor ECDRIVE 4000-C▪ Maintenance-free brushless DC motor▪ Water filled▪ Premium materials, stainless steel: AISI 304/316▪ No electronics in the motor
Rated power 3,5 kWEfficiency max. 92 %Motor speed 900...3 300 rpmInsulation class FEnclosure class IP68Submersion max. 250 m
Pump End PE C-SJ60-1▪ Non-return valve▪ Premium materials, stainless steel: AISI 304
Standards2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.
Pump Unit PU C-SJ60-1 (Motor, Pump End)Borehole diameter min. 6,0 inWater temperature max. 50 °C
Technical Data
System Overview
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ60-1
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Controller
A =B =C =D =E =S =
613 mm245 mm368 mm96 mm150 mm4 in
Pump Unit
Net weight
Controller 9,0 kg
Pump Unit 17 kg
Motor 10 kg
Pump End 7,0 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
Dimensions and Weights
Pump Chart Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ60-1
Données techniques Hauteur manométrique max. 450 m
Débit max. 0,93 m³/h
Vmp* > 238 V
Voc max. 375 V
Applications▪ Alimentation en eau potable ▪ Régulation des nappes d'étang ▪ Irrigation▪ Abreuvoir ▪ Systèmes de mise sous pression
Caractéristiques ▪ Installation rapide et sans risque▪ Entretien minimal ▪ Très grande fiabilité et longue durée de vie ▪ Retour sur investissement rapide (ROI) ▪ Faibles coûts d'exploitation (TCO)
Composants
Contrôleur: PS4000▪ Commande et surveillance ▪ Entrées de commande pour protection
contre le fonctionnement à sec, commande à distance, etc.
▪ Protection contre inversion de polarité, surcharge et surchauffe
▪ MPPT intégré
Moteur: ECDRIVE 4000-HR▪ Entretien minimal, moteur DC sans balais ▪ Rempli d'eau▪ Moteur sans électronique à l'intérieur ▪ Submersion max. 250 m, IP68
Extrémité de la pompe: PE HR-05HHL**▪ Très grande fiabilité et longue durée de
vie ▪ Clapet anti-retour ▪ Matériel de haute qualité ▪ En option : protection contre le
fonctionnement à sec
Normes2006/42/EC, 2004/108/EC, 2006/95/EC
Les logos indiquent les autorisations obtenues pour cette gamme de produits. Les produits sont commandés et livrés selon les autorisations propres aux exigences du marché.
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Créé par LORENTZ COMPASS 3.0Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 HR-05HHL
Dimensions et poids
Graphique de la pompe Vmp* > 238 V
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
ContrôleurA =B =C =D =S =
939 mm245 mm694 mm96 mm1,25 in
Pompe
Poids net
Contrôleur 9,0 kg
Pompe 16 kg
Moteur 10 kg
Extrémité de la pompe 5,5 kg
*Vmp: Tension MPP en condition de test standard (STC) : rayonnement solaire 1 000 W/m², température des cellules 25 °C **Préciser la plage de température à la commande
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Créé par LORENTZ COMPASS 3.0Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 HR-05HHL
Head max. 160 mFlow rate max. 4,2 m³/h
Controller PS4000▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)
Power max. 4,0 kWInput voltage max. 375 VOptimum Vmp* > 238 VMotor current max. 15 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure class IP54
Motor ECDRIVE 4000-C▪ Maintenance-free brushless DC motor▪ Water filled▪ Premium materials, stainless steel: AISI 304/316▪ No electronics in the motor
Rated power 3,5 kWEfficiency max. 92 %Motor speed 900...3 300 rpmInsulation class FEnclosure class IP68Submersion max. 250 m
Pump End PE C-SJ3-32▪ Non-return valve▪ Premium materials, stainless steel: AISI 304
Standards2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.
Pump Unit PU C-SJ3-32 (Motor, Pump End)Borehole diameter min. 4,0 inWater temperature max. 50 °C
Technical Data
System Overview
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 4" wellsPS4000 C-SJ3-32
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Controller
A =B =C =D =E =S =
1 088 mm245 mm843 mm96 mm98 mm1,25 in
Pump Unit
Net weight
Controller 9,0 kg
Pump Unit 20 kg
Motor 10 kg
Pump End 9,5 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
Dimensions and Weights
Pump Chart Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 4" wellsPS4000 C-SJ3-32
Chute max. 140 mDébit max. 7,0 m³/h
Contrôleur PS4000▪ Entrées de commande pour protection contre le fonctionnement à sec, commande à distance, etc.▪ Protection contre inversion de polarité, surcharge et surchauffe▪ MPPT (Maximum Power Point Tracking) intégré
Puissance max. 4,0 kWTension d'entrée max. 375 VOptimal Vmp** > 238 VIntensité du moteur max. 15 AEfficacité max. 98 %Temp. ambiante -30...50 °CClasse de protection IP54
Moteur ECDRIVE 4000-C▪ Entretien minimal, moteur DC sans balais ▪ Rempli d'eau▪ Matériel de haute qualité, acier inoxydable: AISI 304/316▪ Moteur sans électronique à l'intérieur Puissance nominale 4,0 kWEfficacité max. 92 %Vitesse du moteur 900...3 300 rpmClasse d'isolation FClasse de protection IP68Submersion max. 150 m
Extrémité de la pompe PE C-SJ5-25▪ Clapet anti-retour ▪ Matériel de haute qualité, acier inoxydable: AISI 304▪ En option : protection contre le fonctionnement à sec ▪ Centrifugal pump
Normes2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
Les logos indiquent les autorisations obtenues pour cette gamme de produits. Les produits sont commandés et livrés selon les autorisations propres aux exigences du marché.
Pompe PU4000 C-SJ5-25 (Moteur, Extrémité de la pompe)Diamètre de forage min. 4,0 inTempérature de l'eau max. 50 °C
Données techniques
Gamme de systèmes
* PS DataModule est inclus dans tous les contrôleurs PSk2 et n'importe quel contrôleur PS avec -D dans sa description. Les variantes -D devraient être commandées s'il y a un besoin potentiel d'utiliser les caractéristiques du PS DataModule à l'avenir, comme il n'y a pas d'option de montage ultérieur.
**Vmp: Tension MPP en condition de test standard (STC) : rayonnement solaire 1 000 W/m², température des cellules 25 °C
PS DataModule - enregistreur de données intégré et caractéristiques de gestion de pompe avancées. Permet la configuration simple du système, données en temps réel et enregistrées et en plus fournit la communication Bluetooth au PumpScanner Android ™ App et PS Communicator.*
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Créé par LORENTZ COMPASS 3.1.0.32Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 C-SJ5-25
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Contrôleur
A =B =C =D =E =S =
941 mm245 mm696 mm96 mm98 mm1,5 in
Pompe
Poids net
Contrôleur 9,0 kg
Pompe 18 kg
Moteur 10 kg
Extrémité de la pompe 8,0 kg
*Vmp: Tension MPP en condition de test standard (STC) : rayonnement solaire 1 000 W/m², température des cellules 25 °C
Dimensions et poids
Graphique de la pompe Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Créé par LORENTZ COMPASS 3.1.0.32Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 C-SJ5-25
Chute max. 80 mDébit max. 14 m³/h
Contrôleur PS4000▪ Entrées de commande pour protection contre le fonctionnement à sec, commande à distance, etc.▪ Protection contre inversion de polarité, surcharge et surchauffe▪ MPPT (Maximum Power Point Tracking) intégré
Puissance max. 4,0 kWTension d'entrée max. 375 VOptimal Vmp** > 238 VIntensité du moteur max. 15 AEfficacité max. 98 %Temp. ambiante -30...50 °CClasse de protection IP65
Moteur ECDRIVE 4000-C▪ Entretien minimal, moteur DC sans balais ▪ Rempli d'eau▪ Matériel de haute qualité, acier inoxydable: AISI 304/316▪ Moteur sans électronique à l'intérieur Puissance nominale 4,0 kWEfficacité max. 92 %Vitesse du moteur 900...3 300 rpmClasse d'isolation FClasse de protection IP68Submersion max. 150 m
Extrémité de la pompe PE C-SJ8-15▪ Clapet anti-retour ▪ Matériel de haute qualité, acier inoxydable: AISI 304▪ En option : protection contre le fonctionnement à sec ▪ Centrifugal pump
Normes2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61010-1:2010, IEC 62103:2003, IEC/EN 60034-1:2010, IEC/EN 60335-2-41:2003+A1+A2,IEC/EN 60335-1:2012, EN 62233:2008IEC/EN 61000-6-4:2007+A1, IEC/EN 61000-6-2:2005
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
Les logos indiquent les autorisations obtenues pour cette gamme de produits. Les produits sont commandés et livrés selon les autorisations propres aux exigences du marché.
Pompe PU4000 C-SJ8-15 (Moteur, Extrémité de la pompe)Diamètre de forage min. 4,0 inTempérature de l'eau max. 50 °C
Données techniques
Gamme de systèmes
* PS DataModule est inclus dans tous les contrôleurs PSk2 et n'importe quel contrôleur PS avec -D dans sa description. Les variantes -D devraient être commandées s'il y a un besoin potentiel d'utiliser les caractéristiques du PS DataModule à l'avenir, comme il n'y a pas d'option de montage ultérieur.
**Vmp: Tension MPP en condition de test standard (STC) : rayonnement solaire 1 000 W/m², température des cellules 25 °C
PS DataModule - enregistreur de données intégré et caractéristiques de gestion de pompe avancées. Permet la configuration simple du système, données en temps réel et enregistrées et en plus fournit la communication Bluetooth au PumpScanner Android ™ App et PS Communicator.*
BERNT LORENTZ GmbH & Co. KGSiebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de
Créé par LORENTZ COMPASS 3.1.0.60Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 C-SJ8-15
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Contrôleur
A =B =C =D =E =S =
1 118 mm245 mm873 mm96 mm98 mm2 in
Pompe
Poids net
Contrôleur 9,0 kg
Pompe 21 kg
Moteur 10 kg
Extrémité de la pompe 11 kg
*Vmp: Tension MPP en condition de test standard (STC) : rayonnement solaire 1 000 W/m², température des cellules 25 °C
Dimensions et poids
Graphique de la pompe Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGSiebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de
Créé par LORENTZ COMPASS 3.1.0.60Toutes les caractéristiques techniques et informations sont fournies de bonne foi. Un risque d’erreur existe et les produits peuvent être modifiés sans préavis.Les photos peuvent varier des produits réels selon les exigences et les réglementations du marché local.
Système de pompe solaire immergée pour puits 4" PS4000 C-SJ8-15
Head max. 45 mFlow rate max. 25 m³/h
Controller PS4000▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)
Power max. 4,0 kWInput voltage max. 375 VOptimum Vmp* > 238 VMotor current max. 15 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure class IP54
Motor ECDRIVE 4000-C▪ Maintenance-free brushless DC motor▪ Water filled▪ Premium materials, stainless steel: AISI 304/316▪ No electronics in the motor
Rated power 3,5 kWEfficiency max. 92 %Motor speed 900...3 300 rpmInsulation class FEnclosure class IP68Submersion max. 250 m
Pump End PE C-SJ17-4▪ Non-return valve▪ Premium materials, stainless steel: AISI 304
Standards2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.
Pump Unit PU C-SJ17-4 (Motor, Pump End)Borehole diameter min. 6,0 inWater temperature max. 50 °C
Technical Data
System Overview
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ17-4
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Controller
A =B =C =D =E =S =
754 mm245 mm509 mm96 mm133 mm2,5 in
Pump Unit
Net weight
Controller 9,0 kg
Pump Unit 21 kg
Motor 10 kg
Pump End 11 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
Dimensions and Weights
Pump Chart Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ17-4
Head max. 22 mFlow rate max. 45 m³/h
Controller PS4000▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)
Power max. 4,0 kWInput voltage max. 375 VOptimum Vmp* > 238 VMotor current max. 15 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure class IP54
Motor ECDRIVE 4000-C▪ Maintenance-free brushless DC motor▪ Water filled▪ Premium materials, stainless steel: AISI 304/316▪ No electronics in the motor
Rated power 3,5 kWEfficiency max. 92 %Motor speed 900...3 300 rpmInsulation class FEnclosure class IP68Submersion max. 250 m
Pump End PE C-SJ30-2▪ Non-return valve▪ Premium materials, stainless steel: AISI 304
Standards2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1
The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.
Pump Unit PU C-SJ30-2 (Motor, Pump End)Borehole diameter min. 6,0 inWater temperature max. 50 °C
Technical Data
System Overview
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ30-2
H =H2 =W1 =W2 =W3 =
D =D1 =
595 mm563 mm178 mm156 mm116 mm165 mm150 mm
Controller
A =B =C =D =E =S =
705 mm245 mm460 mm96 mm133 mm3 in
Pump Unit
Net weight
Controller 9,0 kg
Pump Unit 20 kg
Motor 10 kg
Pump End 9,5 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature
Dimensions and Weights
Pump Chart Vmp* > 238 V
BERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
Created by LORENTZ COMPASS 3.0.9.5All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Solar Submersible Pump System for 6" wellsPS4000 C-SJ30-2