long beach hex gazebo with nettss-k-138-2ngz13

LONG BEACH 13’ HEX GAZEBO WITH NET

Product code: D71 M34593UPC code: 769455 767318

1

Vendor Item: SS-K-138-2NGZ13

OWNER’S MANUAL

Date of purchase: _____/ _____/ _____

2

Special WarningAssemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use

care when handling. Assembly by six adults is recommended. The gazebo is not intended to be a

permanent structure. Take it down during high winds or it may be damaged.

KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC

The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not

may render the flame-resistant properties

fireproof. The canopy fabric will burn if left in continuous contact with flame source. The

application of any foreign substance to the canopy fabric ineffective.

Caution:This gazebo is made for explicit purpose of providing limited outdoor sun shade and is not to be used as a toy, shelter or tent. This gazebo is not intended for inclement weather in any form including, but not limited to: rain, hail, sleet, snow and/or wind. Do not locate structure near any open flame. Do not use structure as a support. Do not shake, lean or climb on structure. Children under age of 10, near the structure, should be supervised by a competent adult at all times.

PARTSRead through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by six people is recommended.

A Leg Post

B Top Beam

C Decorative Panel(with three holes on top connection bar)

D Decorative Panel(without three holes on top connection bar)

E Tabletop Crossbar

F Large Canopy Frame Center Piece

G Large Canopy Frame Bar

H Short Canopy Frame Center Piece

I Short Canopy Frame Bar

J Support Bar

K Support Plate

L Curved Support Bar

M1 Tabletop(with “M1” label）

ITEM DESCRIPTION QUANTITY

6

6

2

2

2

1

6

1

6

2

2

1

1

1

1Tabletop(with“M2” label)M2

N1 Tabletop(with“N1” label)

3

N2 Tabletop(with“N2” label) 1

1

1

6

6

O Large Canopy P Small Canopy Q Net

R T-shaped Bracket

ACCESSORIES

Sa (52 + 3 spares)Short Bolt

Sb (9 + 1 spare) Long Bolt

Sh (1)Hook

Sg (12)Lawn Stake

Sj (2)Allen Wrench

Si (2)Open Hex Wrench

Sc (8 + 1 spare） Countersunk Bolt

Sd (3spare) Plastic Washer

Se (75)Metal Washer

Sf (12 + 1 spare)Nut

Sl (1)Assembly Instructions Sheet

Sk (1)Touch-up Paint

5

Sm (2) Medium Bolt

1

Repeat procedure for the other side.Repeat procedure for the other three decorative panels(C & D).

2

Se x 2Metal Washer

ASSEMBLY INSTRUCTIONS

6

Don’t tighten completely.

Repeat Step 2-1 for the other side.

Repeat Step 2-1 & Step 2-2 for other decorative panel C.

Sb x 2Long Bolt

Sc x 8 Countersunk Bolt

3 Sa x 24Short Bolt

Se x 24Metal Washer

4

7


Repeat procedure for the other leg posts.



Securely tighten all bolts on Step 3 &Step 4.

Sa x 12Short Bolt

Se x 12Metal Washer

Note:the holes of leg post should face inside.

5

6

8

Repeat procedure for the other canopy frame bar(G). Make sure the button fits securely into the holes.

7

8

Make sure the button fits securely into the hole.Repeat procedure for the others.

9

Make sure the button fits securely into the hole.

10

9

10

Repeat procedure for the other tabletop(M2 & N1 & N2). Don’t tighten completely.

Sb x 6 Long Bolt

Se x 12Metal Washer

Sf x 6Nut


Repeat Fig.12 for the other five bars(G).

Then securely tighten all bolts and nuts.

Repeat Fig.13 for other corners.

Sa x 8Short Bolt

Se x 8Metal Washer

Se x 8Metal Washer

Sf x 4Nut

Sa x 2Short Bolt

Sd x 2Plastic Washer

11

11

12Repeat Fig.15 & Fig. 16 for the other support bar (J).


Sa x 4Short Bolt

Se x 4Metal Washer


Repeat procedure for the other side.

Sm

Sm x 2Medium Bolt

14 Sh x 1Hook

12

13

Se x 5Metal Washer

Sf x 2Nut

Sb x 1 Long Bolt

Sa x 2 Short Bolt

Sd x 1Plastic Washer


Securely tighten all bolts and nuts for all above steps.


CARE INSTRUCTIONS

Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.

Cover furniture with outdoor furniture covers when not in use.

See our extensive assortment of outdoor living productson-line at www.sears.com and www.kmart.com

Made in / Hech en CHINADistributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179

For questions or comments about product:Call toll-free: 1-800-457-4652

Please refer to part numbers when reordering

PLEASE NOTE: 1. To remove canopy support bars press the pushpin in the cylinder that connects the top and bottom canopy supports and lift evenly as shown in the figure.

2. To remove any bars connected by the pushpin, press the pushpin in the bar and pull out the bar evenly as shown in the figure.

E

F

E

F

15

Your gazebo is now ready for use. Enjoy!

13

long beach hex gazebo with nettss-k-138-2ngz13

Documents