logistic
DESCRIPTION
http://attec.co.uk/TRANSCRIPT
LOGISTIC
Photo in den blauen Bereich einfügen
2 3
Komplette logistik / transportsystemer for tomme bakker Complete logistics / transport systems for empty trays
ATTEC designer systemer til håndtering af forskellige bakketyper efter kundens individuelle behov. Anlægget består af modulopbyggede transportbaner for såvel horisontal som vertikal transport. Banerne fremstilles komplet i rustfrit stål inklusive rustfrie trommelmotorer og rustfrie løsende tromler / hjul. Håndteringsenheder som pneumatiske stop, sammenløb og udslusningsenheder er modulopbyggede og kan monteres individuelt på banerne.
ATTEC designs systems for handling whatever tray types the customer requires. The installation consists of modular conveyor belts for both horizontal and vertical transport. The belts are supplied complete in stainless steel, including stainless steel drum motors and stain-less steel idler pulleys. Operating devices such as pneumatic stops, pusher, scraper and two-way guide are modular in design and can be installed individually on the belts.
Photo 1 Photo 2
Photo 3 Photo 4 Photo 11
Photo 5
Photo 6
Photo 9 Photo 10
Photo 12 Photo 13
Photo 7 Photo 8
4 5
Photo 3
Photo 23
Komplette logistik / transportsystemer for fyldte bakker Complete logistics / transport systems for full trays
ATTEC designer systemer til håndtering af forskellige bakketyper efter kundens individuelle behov. Anlægget består af modulopbyggede transportbaner for horisontal transport, samt elevatorer / taktelevatorer for vertikal transport. Banerne fremstilles komplet i rustfrit stål inklusive rustfrie trommelmotorer og rustfrie løsende tromler / hjul. Håndteringsenheder som pneumatiske stop, sammenløb, udslus-ningsenheder og bakketømmere for tømning af 1 – 3 bakker ad gangen er modulopbyggede, og kan monteres individuelt på banerne.
ATTEC designs systems for handling whatever tray types the customer requires. The installation consists of modular conveyor belts for horizontal transport and elevators / step elevators for vertical transport. The belts are supplied complete in stainless steel, including stainless steel drum motors and stainless steel idler pulleys. Operating devices such as pneumatic stops, pusher, scraper, two-way guides and tray tippers for emptying 1-3 trays at a time are modular in design and can be installed individually on the belts.
Photo 14 Photo 15
Photo 16 Photo 17
Photo 19 Photo 20 Photo 21
Photo 22
Photo 25
Photo 18 Photo 24
Photo 26
6 7
Destination control for logistics /transport systems for full trays
Destinationsstyring til logistik / trans-portsystemer for fyldte bakkerPLC-styring og IT-registrering i forbindelse med transportsystemet er grundlaget for produktionsforløbet. IT-registreringen foretages ved ID-punkterne, hvilket er vejepunkt samt registrering af bakke identifikation og produkttype. Kodsystem på bakkerne kan være streg-kode-label, chip eller RFID.
PLC and IT registration within the transport system are the basis for production progress. IT registration is undertaken at the ID points (tray identification and product type). The code system on the trays can be barcode label, chip or RFID.
Stabling og nedstabling samt pallete-ring og depalletering
Stacking / de-stacking and palletizing /de-palletizing
Standardmaskiner inkl. selvstændige PLC styringer for op / ned-stabling samt depalletering fra paller og palletering på paller og trolley.
Standard machines including independent PLC-control for stacking/de-stacking as well as de-palletizing of pallets and palletizing on pallets and trolleys.
Photo 27
Photo 31
Photo 28
Photo 32
Photo 29 Photo 37
Photo 33 Photo 40 Photo 34 Photo 36
Photo 30 Photo 38 Photo 39
Photo 35 Photo 41
ITEC GmbHAuf dem Tigge 60 b + cD-59269 BeckumGermanyPhone +49 25 21 - 85 07 0Fax +49 25 21 - 85 07 90www.itec.de • [email protected]
ATTEC DANMARK A/SMommarkvej 293 - 297DK-6470 SydalsDenmarkPhone +45 74 40 76 44Fax +45 74 40 79 29www.attec.dk • [email protected] 00
513