lodge - south cypress · lodge ™ colorbody ™ porcelain is the perfect fusion of rustic meets...
TRANSCRIPT
Photo features Sabi Sabi Light Polished in 24 x 24 field tile on the floor in a grid pattern.
floo
r •
wal
l •
coun
tert
opLodge™ ColorBody™ Porcelain is the perfect fusion of rustic
meets contemporary. With a refined stone visual and smooth
Tru-Edge™ cut, Lodge offers a compelling visual at an affordable
price. Available in five warm colors and coordinating modern
liner accents, Lodge is sure to complement any project. The
option of four field sizes available in three surface textures
offers a wide range of application uses, including residential and
commercial exteriors.
COLORBODY™ PORCELAINLODGE™
floo
r •
wal
l •
coun
tert
op Field Tile
OCEAN P301
ALPIN P300
PAPOOSE P302
PICO BONITO P303
SABI SABI P304
UNPOLISHED
OCEAN P301
ALPIN P300
PAPOOSE P302
PICO BONITO P303
SABI SABI P304
LIGHT POLISHED
OCEAN P301
ALPIN P300
PAPOOSE P302
PICO BONITO P303
SABI SABI P304
TEXTURED
CLOSE-UPOF TILE
CLOSE-UPOF TILE
GLAZED PORCELAINLODGE™
CLOSE-UPOF TILE
Decorative Accents
Pattern Ideas
ALPIN P30012 x12 Modern Liner
PICO BONITO P30312 x12 Modern Liner
OCEAN P30112 x12 Modern Liner
PAPOOSE P30212 x12 Modern Liner
SABI SABI P30412 x12 Modern Liner
CREATIVE IDEAS
BLOCK TRELLIS CHECKERBOARDDIAMOND CORRIDOR
NOTESFor proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20” x 20”, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
Special care needs to be given when installing tiles 20” and larger. Please refer to www.daltileproducts.com/LargeTiles for information.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
For additional information refer to “Factors to Consider” at www.daltile.com/CommercialFactors.
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.
INSTALLATION
THICKNESS GROUT JOINT RECOMMENDATION
3/8” 1/8”
TEST RESULTS (Unpolished and Textured only)
ASTM# UNPOLISHED LT. POLISHED TEXTURED
Water Absorption C373 < 0.5% < 0.5% < 0.5%
Breaking Strength C648 > 450 lbs. > 450 lbs. > 450 lbs.
Scratch Hardness MOHS 8.0 8.0 8.0
Chemical Resistance C650 Resistant Resistant Resistant
Coefficient of Friction C1028 Wet: ≥ 0.60 Dry: ≥ 0.70
Wet: ≥ 0.50 Dry: ≥ 0.70
Wet: ≥ 0.65 Dry: ≥ 0.80
SHADE VARIATION
MEDIUM (V2)Color variation within each tile.
SLIP RESISTANCE (WET) : 2 & 3The higher the rating, the higher the slip resistance.
1 < .50
2 .50 - .59 (Light Polished)
3 ≥ .60 (Unpolished & Textured)
SIZES
SQ. FT. CARTON
PIECES PER CARTON
16 x 32 Field Tile (15-3/4” x 31-1/2”) (40.0 cm x 80.0 cm) 13.77 4
24 x 24 Field Tile (23-9/16” x 23-9/16”) (60.0 cm x 60.0 cm) 11.62 3
12 x 24 Field Tile (11-3/4” x 23-9/16”) (30.0 cm x 60.0 cm) 11.62 6
12 x 12 Field Tile (11-3/4” x 11-3/4”) (30.0 cm x 30.0 cm) 10.65 11
12 x 12 Modern Liner Decorative Accent
(11-3/4” x 11-3/4”) (30.0 cm x 30.0 cm) - - 11
RESIDENTIAL USAGE
FLOORS WALLS COUNTERTOPSEXTERIOR
PATIOSEXTERIOR
POOL DECKS
F W C EP* ED**
* Unpolished and textured surfaces only.
** Unpolished and textured surfaces only.
TRIM
TYPE NUMBER SIZEPCS. PER CARTON
Bullnose S-43C9 3 x 12 33
Cove Base S-36C9T 6 x 12 20
Cove Base Outcorner SC-36C9T 1 x 6 10
COMMERCIAL USAGEAPPLICATION INTERIOR EXTERIOR
RESIDENTIALLIGHT
COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios * **
Walls/Backsplashes
Countertops
Pool Decking ** ** ** ** **
Pool Lining
*Unpolished and Textured surfaces only.**Textured surface only.Textured surface: Suitable for exterior floors (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.Unpolished & Light Polished surfaces: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
7834 C. F. Hawn Freeway | Dallas, TX 75217 | 214.398.1411 800.933.TILEFor more information about Daltile products and services, visit our website at daltile.com
floo
r •
wal
l •
coun
tert
op
GLAZED PORCELAINLODGE™
©20
12 D
al-T
ile C
orpo
ratio
n (
6/12
) S
SDT
SSLO
DG
E
By their very design, Daltile products can help make it easier for you to earn LEED™ points and/or points towards many industry leading green home building programs. From using recycled material content to establishing manufacturing facilities within 500 miles of your project, we help ensure you don’t have to compromise your design to be environmentally conscious. For detailed information, visit daltilegreenworks.com.