loctite lt3355 adhesive source book 2007

Loctite ® products for design, assembly,manufacturing, and maintenance

the

volume 7

the adhesive sourcebook 2007volum

e 7

U.S.A.For your local Loctite® Adhesives and SealantsSpecialist, the nearest authorized Loctite® productsdistributor, to place an order, to arrange an in-plantseminar or for technical product assistance, call:1.800.LOCTITE (562.8483)

Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, Connecticut 06067Tel: 860.571.5100Fax: 860.571.5465www.henkelna.com/industrialwww.loctite.com

CanadaFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order, to arrange an in-plant seminar, or for technical productassistance, call:1.800.263.5043 (within Canada)

Henkel Canada Corporation2225 Meadowpine Blvd.Mississauga, Ontario, Canada L5N 7P2Tel: 1.800.263.5043 (within Canada)Tel: 905.814.6511Fax: 905.814.6522

MexicoFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order,to arrange an in-plant seminar or for technical product assistance,call: 01 800 901 8100 (within Mexico)

Henkel Capital S.A. de C.V. Boulevard Magnocentro No. 8 Piso 2Centro Urbano Interlomas52760 Huixquilucan, Estado de MexicoTechnical Product Assistance: 01 800 901 8100 (within Mexico)To place an order:Tel: +52 (55) 5836 3644Fax: +52 (55) 5787 9404www.loctite.com.mx

Central AmericaFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order,to arrange an in-plant seminar, or for technical product assistance,call: 506.277.4868 (within Costa Rica)

Henkel Costa Rica Ltda.San Joaquin de FloresHeredía, Costa RicaTel: 506.277.4868 (within Costa Rica)Tel: 506.277.4800Fax: 506.277.4883www.loctite.com.mx

Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, CT 06067U.S.A.www.henkelna.com/industrialwww.loctite.com

Henkel –Your partner worldwide

Except as otherwise noted, all trademarks in this catalog are trademarks of Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office.Krytox is a registered trademark of E.I. DuPont de Nemours Co., Inc. UL is a registered trademark of Underwriter’s Laboratories, Inc. NSF is a registered trademark of NSF International. CSA is a registered trademark of CSA International. © Henkel Corporation, 2007. All rights reserved. 3848 / LT-3355 (1/2007)

South AmericaFor your local Loctite ® Adhesives and Sealants Specialist, for your nearest authorizedLoctite® products distributor, to place an order,to arrange an in-plant seminar, or for technical product assistance, contact:

Henkel Ltda.Rua Karl Huller, 136 – Jd. Canhema 09941-410Diadema/SP, BrazilTel: 0800 704 2334 (within Brazil)Tel: 55.11.4075.8955Fax: 55.11.4075.8887www.loctite.com.br

Henkel Argentina S.A.Tte. Cnel. Magán 1990 – Sarandi(B1872HRN) AvellandaBuenos Aires, ArgentinaTel: 0800 33 30213

(within Argentina)Tel: 54 11 4001 0100Fax: 54 11 4205 3442www.loctite.com.ar

Henkel Chile Ltda.Av. Apoquindo 3355, Oficina 8 – 1º PisoLas Condes, Santiago, ChileTel: 800 212002 (within Chile)Tel: 56 2 2333606Fax: 56 2 2341448www.loctite.cl

Henkel Colombiana S.A.Calle 17 No. 68-B-73Bogotá D.C., ColombiaTel: 01 800 01 14173 (within Colombia)Tel: 571 423 9000Fax: 571 425 1331www.loctite.com.co

Henkel Venezolana S.A. Zona Industrial Pruinca Calle 2 Parcela 31 y 32Guacara – Edo Carabobo, VenezuelaTel: 0800 436 5300 (within Venezuela)Tel: 5824 5560 2611Fax: 5824 5560 2660www.loctite.com.ve

Distributor Information

Material Safety Data Sheets

Technical Data Sheets

Product Application Assistance

Product Literature

Visit the web for immediate access to:

Material Safety Data Sheets and TechnicalData Sheets also available by 24-hour fax.1.800.LOCTITE (562.8483)1.800.263.5043 (within Canada)

For information on ManufacturingReliability Training call:1.800.LOCTITE (562.8483)1.800.263.5043 (within Canada)

adhesivesourcebook2007

The Adhesive Sourcebook

The complete source of Loctite® adhesives, sealants,lubricants, coatings, dispensing and curing equipmentavailable only from Henkel Corporation.

2007

VO

LU

ME

7

In addition to support from your local representative,The Adhesive Sourcebook is also supported bywww.loctite.com – a virtual adhesive library designed to give you the best technical electronic support in the industry.

Available at your convenience, from your desktop,log on to our web site to obtain the following:

E-CATALOGGain quick and easy access to product descriptions,approvals/specifications, application suggestions,package specifications, and technical and material safety data.

APPLICATION ASSISTANCEApplication assistance will aid in narrowing the range of products suitable for your design and maintenanceneeds. Or send a message to your local Adhesives andSealants Specialist to arrange “in person” assistance.

DISTRIBUTOR LOCATORFind a local distributor in the U.S. or Canada that hasthe product you need. All it takes is a zip code.

DATA SHEETS & LITERATUREInstant access to technical and material safety data sheets.View electronic versions of our design guides, bondingguides, quick reference tools, and other special literature.

WHAT’S NEW?Find out about new Loctite® product introductions,feature articles, trade show schedules, and applicationsuccess stories. Register on-line for adhesives seminars orCEU-accredited Manufacturing Reliability Trainingclasses in your area.

The Adhesive Sourcebook contains over 1,400 productsin total! Put them to work to make things better, faster,and more cost efficient. Loctite® products will help youtackle the most difficult challenges the world canthrow your way.

Reorganized to make Loctite® product selection easy and fast:

■ Industrial Application Solutions – Twelve applicationareas feature easy - to -use product selector guides,Top Choice designations, and dispensing optionsdesigned to help you quickly narrow your search forthe right Loctite® product solution to all yourdesign, assembly, maintenance or repair challenges.

■ Medical Application Solutions – Distinctive line formedical device assemblies.

■ Agency Approvals – Quick reference listing of certifiedLoctite® products by agency: ABS, CFIA, CSA, FDA,ISO, Mil -Spec, NSF®, UL®, ULC®, NEHC, NAVSEA andLloyd’s of London.

■ Engineering Services – Engineers and scientists areavailable to provide engineering assistance, contractlab services, prototype testing, joint productdevelopment programs and more.

■ Training – A variety of training programs are offeredto educate today’s product designers, productionand maintenance staffs, on the benefits and cost -savings associated with Loctite® product solutions.

■ Indexes – Easy - to -use indexes help you quickly findobsolete items, Loctite® products by product numberand item number, and by Loctite® product name.

Call us at 1-800-LOCTITE (562 -8483) in the U.S. and 1-800-263-5043 in Canada:

■ For technical product assistance

■ For local application assistance from the Loctite®Adhesives and Sealants Specialist in your area

■ For the name of your nearest distributor authorizedto sell Loctite® products

■ For access to the Henkel Auto -Fax system toobtain Loctite® product data sheets or materialsafety data sheets

Table of Contents

INDUSTRIAL APPLICATION SOLUTIONSBONDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Cyanoacrylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Hot Melts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Light Cure Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Modified Silanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Solvent - Based Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Structural Acrylic Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Structural Epoxy & Urethane Adhesives. . . . . . . . . . . . . . . . . . . . . . 24

COATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Protective Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Wear-Resistant Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

FLOORING & CONCRETE REPAIR . . . . . . . . . . . . . . . . . . 40Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Anti -Slip Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Flooring, Concrete Repair & Grouting . . . . . . . . . . . . . . . . . . . . . . . . 44

GASKETING & SEALING . . . . . . . . . . . . . . . . . . . . . . . . . . 48Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Anaerobics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Modified Silanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Silicone Adhesives & Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

LUBRICATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Anti -Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

MACHINING COMPOUNDS (ABRADING) . . . . . . . . . . . . 70Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Abrading Compounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

POTTING & ENCAPSULATING . . . . . . . . . . . . . . . . . . . . . 74Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Epoxies & Polyurethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Hot Melts & Silicones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

REPAIRING, REBUILDING & RESTORING . . . . . . . . . . . . 82Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Belt Repair & Urethanes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Maintenance & Repair Epoxies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

RETAINING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

SURFACE PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . 96Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Accelerators, Activators & Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Cleaners & Degreasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

I NTHREADLOCKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

THREAD SEALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

TOOLBOXES & SPECIALTY KITS . . . . . . . . . . . . . . . . . . 116

MEDICAL APPLICATION SOLUTIONSSelector Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Acrylic Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Cyanoacrylates, Accelerators & Primers. . . . . . . . . . . . . . . . . . . . . . 122Epoxies, Silicones & Urethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

AGENCY APPROVALS LISTING . . . . . . . . . . . . . . . . . . . 126

F.A.Q.s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

SERVICESENGINEERING SERVICES . . . . . . . . . . . . . . . . . . . . . . . . 130OEM TRAINING SERVICES. . . . . . . . . . . . . . . . . . . . . . . 132MRO TRAINING SERVICES. . . . . . . . . . . . . . . . . . . . . . . 133

INDEXOBSOLETE PART NUMBERS . . . . . . . . . . . . . . . . . . . . . . 134LISTING BY ITEM AND PRODUCT NUMBER . . . . . . . . 136LISTING BY PRODUCT NAME. . . . . . . . . . . . . . . . . . . . . 146

The Top Choice designationlets you know that this Loctite® product has demonstratedproven performance in handling a variety of customerapplications and is most often included in initial producttesting and evaluation.

NEW

At Henkel Corporation, we invent more than just quality Loctite® products, we provide solutions toindustry’s biggest challenges. Whether we are reducing assembly cost, providing design and applicationassistance, or increasing the reliability of your process, Henkel is dedicated to earning and keeping the trustof our customers. Through this philosophy, Henkel has assumed a position of worldwide leadership.

Trust Henkel Corporation to be your sole source for design assistance, application assistance, and after- the - sale support.

Bonding

2

For successful bonding, knowledge of adhesivemethodology is essential. The most frequent causes for adhesive failure do not involve adhesive strength.Rather, they are attributed to inadequate preparation of the substrates and improper adhesive selection.

The most important factor in proper adhesive selectionis assessing the environment the adhesive mustwithstand. Once the environmental factors have beenrecognized, adhesive selection becomes more easilydefined as other factors, such as joint design, substrates,load, stress cycles, etc., can often be varied or alteredwith minor design changes.

What is the best adhesive for my application?

The following chart has been designed to help you selecta bonding adhesive. This chart is intended to serve as ageneral guideline to help you determine which adhesivecategories are best suited for your application. The datapresented represents typical properties for each adhesivecategory; however, individual product properties maydiffer. It is suggested that, based on the informationprovided, you consider at least the two best adhesivecategories that meet your application criteria. Individualproduct information can then be found on the pages that follow to help narrow your search.

This chart should not be used to specify products without specifictesting. It is recommended that you conduct on-part testing toensure product performance before specifying any adhesive.

Loctite® Adhesives and Sealants Product Specialists are available toassist you with new product designs, or to help you re - engineer anexisting application for improved performance and cost savings.They can also set up testing of your parts at the Henkel CustomerEngineering Center. For application assistance, call 1-800-LOCTITE(562- 8483) or visit www.loctite.com and select “Contact Loctite.” InCanada, please call 1-800-263-5043.

FREE BONDING GUIDESLoctite® Design Guides help you

select the proper Loctite® adhesive

for bonding Metals, Plastics,

Rubbers and Thermoplastic

Elastomers. Visit www.loctite.com and

click on Product & Service Solutions, then

select Literature to view the guides or

request copies.

BO

ND

ING

Selecto

r Guid

e

3

PERFORMANCECONSIDERATIONS

ADHESIVE CATEGORY

Cyanoacrylates Epoxies Hot Melts Light Cure Silicones ModifiedSilanes Urethanes 2-Part

Acrylics2-Step Acrylics

BENEFITS Wide range ofbonding applications

Wide range offormulations

Fast, largegap filling

Rapid cure/adhesion to

plastics

Excellenttemperatureresistance

Flexible,paintable,

bonder/sealant

Excellenttoughness/flexibility

Good impactresistance/flexibility

Good impactresistance,

no-mix

LIMITATIONS Low solventresistance

Mixing requiredLow heatresistance

Light cure system required

Low adhesionstrength

Low temperatureresistance

Sensitive tomoisture

Mixing required Primer required

TEMPERATURE RESISTANCE

Typical for the category -65°F to +180°F -65°F to +180°F -65°F to +250°F -65°F to +300°F -65°F to +400°F -40°F to +200°F -65F° to +250°F -65°F to +250°F -65°F to +300°F

Highest Rated Product +250°F +400°F +330°F +350°F +725°F +200°F +300°F +250°F +400°F

ENVIRONMENTAL RESISTANCE

Polar Solvents(ex. H2O, Ethylene Glycol IPA, Acetone)

Poor1 Very Good Good Good Good Good Good Good Good

Non-Polar Solvents(ex. Motor Oil, Toluene, Gasoline, ATF)

Good Excellent Good Very Good Poor to Fair Poor Good Very Good Very Good

ADHESION TO SUBSTRATES

Metals Very Good Excellent Good Good Good Good Good Excellent Excellent

Plastics 2 Excellent Fair Very Good Excellent Fair Good Very Good Excellent Fair

Glass Poor Excellent Good Excellent Very Good Good Good Good Excellent

Rubber Very Good Fair Fair Fair Good Poor Good Poor Poor

Wood Good Very Good Excellent Poor Fair Good Fair Good Good

OVERLAPPING SHEARSTRENGTH

High High Low High Low Medium Medium High High

PEEL STRENGTH Low5 Medium Medium Medium Medium Medium Medium High Medium

TENSILE STRENGTH High High Low High Medium Medium Medium High High

ELONGATION / FLEXIBILITY Low Low High Medium High High High High Medium

HARDNESS Rigid Rigid Semi-Soft Semi-Rigid Soft Soft Soft Semi-Rigid Semi-Rigid

PROCESSCONSIDERATIONS

ADHESIVE CATEGORY

Cyanoacrylates Epoxies Hot Melts Light Cure Silicones ModifiedSilanes Urethanes 2-Part

Epoxies2-Step Acrylics

NUMBER OF COMPONENTS 1 2 1 1 1 1 2 2 2

CURE TEMPERATURE RoomTemperature

RoomTemperature

RoomTemperature3 UV/Visible

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

RoomTemperature

FIXTURE TIME

Average 60 seconds 35 minutes 70 seconds 30 seconds 25 minutes 25 minutes 25 minutes 20 minutes 5 minutes

Fastest 5 seconds 3 to 5 minutes 20 seconds 5 seconds 2 minutes 10 minutes 5 minutes 3 to 5 minutes 30 seconds

FULL CURE TIME 24 hours 12 to 24 hours1 hour

(or when cooled)430 to 60seconds

1 to 7 days 1 to 7 days 24 hours 24 hours 24 hours

GAP FILL

Ideal (in inches) 0.001 to 0.006 0.004 to 0.006 0.002 to 0.005 0.002 to 0.010 0.001 to 0.006 0.001 to 0.006 0.004 to 0.006 0.010 to 0.040 0.002 to 0.004

Maximum (in inches) 0.010 0.125 0.240 0.25 0.25 0.24 0.125 0.5 0.040

DISPENSING / MIXINGEQUIPMENT REQUIRED

No Yes Yes No No No Yes Yes No

LIGHT CURE VERSIONSAVAILABLE?

Yes Yes No Yes Yes No No No Yes

For more information on each adhesive category refer to pages…

4-7 24-29 8-11 12-15 56-59 16-17 24-29 21, 23 20, 22

1 Cyanoacrylates have very good moisture resistance on plastics.2 Uncured liquid adhesives may cause stress cracking of certain thermoplastics, e.g. polycarbonate, acrylic, and polysulfone. Special products and

process techniques are available. Consult the Loctite® Design Guide to Bonding Plastics (LT-2197) or contact 1-800-LOCTITE (562-8483) for more information.3 Elevated temperatures are required to dispense liquid Hot Melt Adhesives.4 Urethane Hot Melts require 24 hours for full cure.5 Exception: Toughened cyanoacrylates have HIGH peel strength.

Bonding Selector Guide

4

BO

ND

ING

Cya

noac

ryla

tes

Cyanoacrylates

Technology from Henkel Corporation has made the productivity promises of cyanoacrylate adhesives(instant adhesives) a reality with the industry’s widest selection of high-performance, application-specific,instant adhesives. Loctite® instant adhesives are available in a variety of viscosities, cure speeds, gap-fillingcapabilities, and substrate compatibilities. The ultra high-performance Loctite® Prism® family offersadditional products that surpass the most stringent demands, including toughened formulations, low odorand low blooming products, and thermally resistant formulations.

GENERAL PURPOSE/SURFACE INSENSITIVE

LOCTITE® 401™ PRISM®

INSTANT ADHESIVEMedium ViscosityDesigned for the assembly of difficult- to -bond materials whichrequire uniform stress distribution.Particularly suited for bonding awide range materials, includingmetals, plastics, and elastomers. Also formulated for faster curespeeds on dry or acidic surfacesand substrates.


INSTANT ADHESIVEWicking GradeDesigned for the bonding of plasticsand electrometric materials wherevery fast fixturing is required.


INSTANT ADHESIVEHigh ViscosityFor bonds that require greater gapfill. Bonds to a wide variety ofsubstrates, including dry or acidicsurfaces. Fixtures fast and stays fastthroughout the life of the product.


INSTANT ADHESIVEGelDesigned for the assembly ofdifficult -to -bond materials whichrequire uniform stress distribution.Particularly suited for bondingporous or absorbent materials. Also formulated for faster curespeeds on dry or acidic surfaces and substrates.

LOW ODOR/LOW BLOOMLOCTITE® 403™ PRISM®

INSTANT ADHESIVEHigh ViscosityPart of a family of low odor, low blooming, surface insensitiveproducts designed to improve thework environment and to improvecosmetic appearance. Products now have faster fixture speeds onplastics and metals.


INSTANT ADHESIVEGelParticularly suited for bondingporous or absorbent substrates wherelow odor and/or non-bloomingproperties are required.

TOUGHENED

LOCTITE® 380™ BLACK MAX®

INSTANT ADHESIVEThe original elastomer-modifiedinstant adhesive. Bonds metal,rubber, and plastic. Excellent peel, impact and shear strength.


INSTANT ADHESIVEClearAn adhesive formulated for excellent impact and peel strengthin gap-filling applications.


INSTANT ADHESIVEGelDesigned for porous surfaces andvertical or overhead applicationwith the added benefits provided by an elastomer-modified instant adhesive.

NEW

TOUGHENED CONT.LOCTITE® 435™ PRISM®

INSTANT ADHESIVESurface InsensitiveThe first true clear, surface insensitive,elastomer-modified instantadhesive. Faster fixture times overtraditional toughened adhesiveswith exceptional bond and peelstrength on metals, plastics,and rubbers.

THERMALLY RESISTANTLOCTITE® 4204™ PRISM®

INSTANT ADHESIVEClear, toughened, thermallyresistant instant adhesive. Excellent hot strength and heataging properties up to 250°F.

LIGHT CURE ADHESIVE

LOCTITE® 4306™/4307™

FLASHCURE® LIGHT CURE ADHESIVESLow or high viscosity fluorescentadhesives that achieve tack- freecures in less than 5 seconds.Surface versatile with shadow cure capability.

FLEXIBLELOCTITE® 4851™/4861™ PRISM®

INSTANT ADHESIVESA medium and high viscosityinstant adhesive for the assembly of flexible components.

GENERAL PURPOSE

LOCTITE® 404™ QUICK SET™

INSTANT ADHESIVEFor general maintenance andrepair. Excellent for rubber bonding.

LOCTITE® 430™ SUPER BONDER®

INSTANT ADHESIVEA general industrial -grade instantadhesive. Excellent choice forbonding close - fitting metal parts.

LOCTITE® 444™ TAK PAK®

INSTANT ADHESIVEAn adhesive designed for printedcircuit board assembly and repair.Cures instantly with Loctite® 712™or 7452™ Tak Pak® Accelerator.


INSTANT ADHESIVEDesigned to bond rubber, metal, and plastic parts with gaps to 0.004".


INSTANT ADHESIVEThermal Cycling ResistantA medium viscosity, hightemperature product for all metals, and most plastics andrubbers. Resists temperatures to 180°F continuous or up to 250°F intermittent.

5

BO

ND

ING

Cyano

acrylates

NEW

NEW

Loctite® Benchtop Peristaltic Dispenseris a reliable and effective volumetricdispenser for single -component, lowviscosity instant adhesives, up to 5,000cPA; directly from the product bottle. It is great for dispensing applicationswhere a precise bead or specific flowrate is necessary. The dispenser iselectro -mechanically operated and does not require the use of an air source. For available spare parts and accessories,please visit www.equipment.loctite.com.

Item Number: 98548Dimensions: 3.2" H x 7.2" W x 6.7" DWeight: 6.6 lbs. (2.99 kg)Package Types & Sizes: All Loctite® instant

adhesive packages

Loctite® Integrated Semi-AutomaticDispenser systems combine acontroller and reservoir into a singleunit for valve dispensing of all Loctite®gel and instant adhesives. Thesereservoirs are large enough to acceptup to 2 kg bottles, and units can be equipped with low- level sensing. For available valves, spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Numbers: 97007, 97010, 97017 and 97020Dimensions: 13.2" H x 13.8" W x 9.1" DWeight: 16.5 lbs. (7.5 kg)Package Types & Sizes: 250 ml, 1 lb., 1 L and

2 kg bottles, and 200 g squeeze tubes

See our Loctite® Equipment Sourcebook, LT-3669 or visit us at

www.equipment.loctite.comfor more details.

DISPENSING OPTIONS

New nozzle for optimaldispensing accuracy and control.

Positive seal cap – seals with a click.

Highly flexible package providesflow control and ease of use.

LIGH

T CU

REFL

EXIB

LE

6

BO

ND

ING

Cya

noac

ryla

tes

TOUG

HEN

EDTH

ERM

ALL

YR

ESIS

TAN

TG

ENER

AL

PUR

POSE

LO

W O

DO

R /

LO

W B

LOO

M

TYPI

CAL

USE

COLO

R

GAP

FILL

CATE

GORY

VISC

OSIT

Y(c

PA)

SHEA

R ST

RENG

TH*

(PSI

)

TEM

PERA

TURE

RANG

E

CURE

SPE

ED**

SPEC

IFIC

GR

AVIT

Y

AGEN

CYAP

PROV

ALS

Loctite® Instant Adhesives Properties Chart

P R O D U C T ItemNumber

PackageType & Size

401™

Prism®

401044014040161

3 g tube20 g bottle1 lb. bottle

Generalpurpose

Clear 0.005" Ethyl 110 3,200-65°F to 180°F

Fixture – 15 sec.Full – 24 hrs.

1.05 CFIA

406™

Prism®

406044064040661


Wicking grade

Clear 0.004" Ethyl 20 3,200-65°F to 180°F


1.05Commercial

item std.A-A-3097

431™

Prism®

412544125541256


Gap filling Clear 0.008" Ethyl 1,000 2,300-65°F to180°F


1.1 N/A

454™

Prism®

4540421925454404547445478

3 g tube10 g syringe20 g tube200 g tube300 g cartridge

Poroussurfaces

Clear 0.010" Ethyl Gel 3,200-65°F to 180°F


1.05 CFIA, ABS

455™

Prism®2230917421

10 g syringe200 g tube

Poroussurfaces

Clear 0.010" Alkoxy Gel 2,600-65°F to 160°F


1.10 N/A

403™

Prism®

403044034040361


Gap filling Clear 0.008" Alkoxy 1,000 2,600-65°F to 160°F


1.10 N/A

408™

Prism®4084040861

20 g bottle1 lb. bottle

Wicking grade

Clear 0.002" Alkoxy 5 2,600-65°F to 160°F


1.05 N/A

460™

Prism®

460044604046061


Close fittingparts

Clear 0.004" Alkoxy 45 2,600-65°F to 160°F


1.10 N/A

380™ Black Max®

380043805038061

3 g tube1 oz. bottle1 lb. bottle

Close fittingparts

Black 0.006" Ethyl 300 3,750-65°F to 225°F


1.10 CFIA

410™

Prism®

410044104541061


Gap filling Black 0.008" Ethyl 3,500 3,200-65°F to 225°F


1.07 CFIA

411™

Prism®

411044114541161


Clear gapfilling

Clear 0.008" Ethyl 5,000 3,200-65°F to 180°F


1.07 N/A

426™

Prism®

21921183981745117529

10 g syringe20 g tube200 g tube300 g cartridge

Poroussurfaces

Black 0.010" Ethyl Gel 3,000-65°F to 210°F


1.10 N/A

480™

Prism®4804048061


General filling

Black 0.006" Ethyl 200 3,800-65°F to 180°F


1.10 NSF/ANSI 61

435™

Prism®

410054099440995


Generalpurpose

Clear 0.006" Ethyl 200 2,700-65°F to 240°F


1.1 N/A

438™

Prism®

410064099740996


Generalpurpose

Black 0.006" Ethyl 200 2,800-65°F to 240°F


1.1 N/A

4203™

Prism®2802628027

20 g tube1 lb. bottle

Close fittingparts

Clear 0.005" Ethyl 375 2,200-65°F to 250°F


1.10 N/A

4204™

Prism®2632426325


Gap filling Clear 0.008" Ethyl 4,000 2,100-65°F to 250°F


1.10 N/A

4205™

Prism®

280282802928030

20 g tube200 g tube300 g cartridge

Poroussurfaces

Clear 0.010" Ethyl Gel 2,300-65°F to 250°F


1.10 N/A

4306™

Flashcure®3743937442*

1 oz. bottle1 lb. bottle

Close fittingClear/Pale

Green/Fluorescent

0.004" Ethyl 20 2,000‡ -65°F to 240°F

Fixture < 5 sec¥

1.1 ISO 10993

4307™

Flashcure®3744137443*


Gap fillingClear/Pale

Green/Fluorescent

0.008" Ethyl 900 2,000‡ -65°F to 240°F

Fixture < 5 sec¥

1.1 N/A

4851™

Prism®3773237733


Flexible Clear 0.006" Alkyl 400 2,175-65°F to125°F


1.10 N/A

4861™

Prism®3770837711


Flexible Clear 0.008" Alkyl 4,000 2,465-65°F to125°F


1.10 N/A

* Grit blasted steel.** Varies with substrates.‡ Data generated using polycarbonate.¥ Full Cure = 24 hours without UV exposure

(With UV exposure, see Technical data Sheets)

A complete line of surface primers, accelerators and cleaners areavailable to further enhance the performance of Loctite® instantadhesives. Refer to the Surface Preparation section.

Indicates TOP CHOICE products.

Indicates worldwide availability.

SURF

ACE

INSE

NSI

TIVE

NEW

SURF

ACE

INSE

NSI

TIVE

NEW

NEW

SURF

ACE

INSE

NSI

TIVE

NEW

NEW

7

BO

ND

ING

Cyano

acrylates

* Grit blasted steel. ** Varies with substrates.‡ Contains Loctite® 382™ Tak Pak® Instant Adhesive (20 g bottle),

Loctite® 7452™ Tak Pak® Accelerator (0.7 oz. net wt. aerosol can).† Contains Loctite® 444™ Tak Pak® Instant Adhesive (20 g bottle),

Loctite® 7452™ Tak Pak® Accelerator (0.7 oz. net wt. aerosol can).

A complete line of surface primers, accelerators and cleaners areavailable to further enhance the performance of Loctite® instantadhesives. Refer to the Surface Preparation section.

TYPI

CAL

USE

COLO

R

GAP

FILL

CATE

GORY

VISC

OSIT

Y (c

PA)

SHEA

R ST

RENG

TH*

(PSI

)

TEM

PERA

TURE

RANG

E

CURE

SPE

ED**

SPEC

IFIC

GR

AVIT

Y

AGEN

CYAP

PROV

ALS


PackageType & Size

GEN

ERA

L PU

RPO

SE

Loctite® Instant AdhesivesProperties Chart


382™

Tak Pak®

38203204203824038261

3 g tube20 g kit ‡


Gap filling and ultra-

performancewire tracking

Clear 0.008" Ethyl 5,000 3,200-65°F to180°F

Fixture –30 sec.Full – 24 hrs.

1.05 N/A

404™

Quick Set™ 465514654846561

1⁄3 oz. bottle4 oz. bottle1 lb. bottle

Rubbero-ring bonder

Clear 0.005" Ethyl 80 3,500-65°F to180°F


1.09

ABS, CFIA,Commercial

item std.A-A-3097

409™

Super Bonder®

4090421922409454097418030

3 g tube10 g syringe20 g tube200 g tube300 g cartridge

General purpose

gelClear 0.010" Ethyl Gel 3,200

-65°F to180°F


1.10 N/A

414™

Super Bonder®414044145041461


Plastic bonder Clear 0.006" Ethyl 110 3,200-65°F to180°F


1.05

CFIA,Commercial

item std.A-A-3097

415™

Super Bonder® 4155041561


Gap fillingmetal bonder

Clear 0.008" Methyl 1,500 3,600-65°F to180°F


1.09Commercial

item std.A-A-3097

416™



Gap fillingplastic bonder

Clear 0.008" Ethyl 1,500 3,200-65°F to180°F


1.05

CFIA,Commercial

item std.A-A-3097

420™



Wicking typeplastic bonder

Clear 0.002" Ethyl 2 2,900-65°F to180°F


1.05Commercial

item std.A-A-3097

422™



Gap fillingplastic bonder

Clear 0.008" Ethyl 2,500 3,200-65°F to180°F


1.09

CFIA,Commercial

item std.A-A-3097

430™

Super Bonder®430044305043061


Metal bonderfor close

fitting partsClear 0.005" Methyl 80 3,600

-65°F to180°F


1.09Commercial

item std.A-A-3097

444™

Tak Pak®122922041912294

20 g bottle20 g kit †

1 lb. bottle

Tak Pak®

wire tackingClear 0.007" Ethyl 700 3,200

-65°F to180°F


1.05Commercial

item std.A-A-3097

493™



Wicking typemetal bonder

Clear 0.002" Methyl 2 3,600-65°F to180°F


1.09Commercial

item std.A-A-3097

495™

Super Bonder®

49595

495044955049561

0.07 fl. oz.Gluematic® Pen3 g tube1 oz. bottle1 lb. bottle

Generalpurpose

Clear 0.004" Ethyl 45 2,750-65°F to180°F


1.05

Commercialitem std.

A-A-3097,ABS

496™



Generalpurpose

rubber bonderClear 0.006" Methyl 125 3,600

-65°F to180°F


1.09Commercial

item std.A-A-3097

498™



Thermalcycling

Clear 0.007" Ethyl 500 3,000-65°F to180°F


1.10 N/A

499™

Super Bonder®49904219244994549974

3 g tube10 g syringe20 g tube200 g tube

Thermalcycling gel

Clear 0.010" Ethyl Gel 3,200-65°F to200°F


1.10 N/A

QuickTite®

39202 0.14 oz. bottle General gel Clear 0.010" Ethyl Gel 2,800-65°F to180°F


1.1 N/ANEW

8

BO

ND

ING

Ho

t M

elts

Hot Melts

Loctite® Hysol® hot melt adhesives were developed to bond a variety of substrates, including difficult-to -bond plastics. These adhesives can handle today’s toughest applications in a broad range ofindustries. Loctite® Hysol® hot melts are ideal for applications that require high speed manufacturing,bonding versatility, very large gap filling, fast green strength, and minimal shrinkage. Loctite® Hysol®hot melts are solvent - free and contain environmentally - friendly materials with no harmful VOCs.

SPRAYABLE/EVA-BASEDLOCTITE® 0420™ HYSOL® SPRAYPAC™

POLYSHOT™ HOT MELT ADHESIVEFast SettingFormulated for spray applications.Has an open time of 2 minutes when sprayed and 45 seconds when bead applied.

LOCTITE® 0430™ HYSOL® SPRAYPAC™

POLYSHOT™ HOT MELT ADHESIVEMedium Open TimeSuitable for bonding expandedpolystyrene, polyethylene, andurethane foams. Can be used inapplications where solvent -basedaerosols are used.


HOT MELT ADHESIVEMedium Open TimeFormulated to be spray applied to a wide variety of substrates.


POLYSHOT™ HOT MELT ADHESIVEExtended Open TimeFormulated for spray applications,this adhesive is well suited for useon expanded polystyrene orurethane foams.

POLYOLEFINSLOCTITE® 0452™ HYSOL® SPRAYPAC™

HOT MELT ADHESIVEExtended Open TimeFormulated to be spray applied to awide variety of substrates. Excellentfor bonding expanded polystyrene or urethane foams.

POLYOLEFIN-BASED

LOCTITE® 3651™ HYSOL®

HOT MELT ADHESIVEPlastic BonderAn adhesive for plastic bonding.Ideal for polyethylene and polyolefin plastics. Long open time of 80 to 100 seconds.

URETHANE-BASED


HOT MELT ADHESIVEHigh StrengthA toughened, high strengthadhesive for use on plastics.Flexible bond with an open time of 60 seconds.

9

BO

ND

ING

Ho

t Melts

POLYAMIDE-BASEDLOCTITE® 7460™ HYSOL® SPRAYPAC™

POLYSHOT™ HOT MELT ADHESIVESprayableFormulated for spray applications.High heat resistance and fast settime. Suitable for bonding foams,fabric, and wood.


POLYSHOT™ HOT MELT ADHESIVELong Open TimeFormulated for long open time and high output for bondingsurfaces up to 15 square feet.

LOCTITE® 7809FR™ HYSOL®

HOT MELT ADHESIVEFire RetardantModified with fire retardantmaterials. It has a UL 94V-Oflammability rating.


HOT MELT ADHESIVEHigh TemperatureA high performance polyamide with exceptional high temperatureresistance and impact at low temperatures.


HOT MELT ADHESIVEPottingLow viscosity polyamide used extensively for potting and encapsulating.

EVA-BASEDLOCTITE® 1X™ HYSOL®

HOT MELT ADHESIVEFast SettingMedium to fast setting,recommended for bonding paper,wood, fabric, and foam.

LOCTITE® 3X™ HYSOL® POLYSHOT™

HOT MELT ADHESIVEPorous SubstratesUsed extensively for bonding sandmolds and other porous substrates.


HOT MELT ADHESIVEMedium Open TimeA medium setting adhesive with an open time of 15 seconds.


HOT MELT ADHESIVEGeneral PurposeMedium setting, general purposehot melt adhesive. Excellentadhesion to wood and many plastics.


HOT MELT ADHESIVEExtended Open TimeHighly flexible, 60-second open timefor demanding substrates such asrubber and polyethylene.

EVA BASEDLOCTITE® COOLMELT™ HYSOL®

HOT MELT ADHESIVELow TemperatureFlexible material designed to beapplied at low temperatures. Idealfor bonding heat -sensitive parts.

LOCTITE® SUPERPAC™ HYSOL®

HOT MELT ADHESIVECardboard BonderA medium setting material with a 30-second open time, it is formulated to bond cardboard and foams.

LOCTITE® WAXPAC™ HYSOL®

HOT MELT ADHESIVEWax Coating BonderMedium setting, flexible -basedmaterial formulated to bond waxcoated substrates and withstand low temperatures.

DISPENSING OPTIONSLoctite® Hysol™ 050 / 050-HT 1⁄ 2" Superstick Dispensers arelightweight, ergonomically-designed, manual dispensers forindustrial use. The dispenser contains a fixed precision thermostat control for consistent heating. 050-HT is designed for high temperature polymides. For available spare parts and dispense nozzles,please visit www.equipment.loctite.com.

Item Numbers: 98544 and 98545Dimensions: 3.0" W x 10.25" L x 7.5" HWeight: 1.15 lbs.

Loctite® Hysol™ Reactive Cartridge Dispenser is used to dispensereactive polyurethane hot melts from 300 ml cartridges. Thiselectronically -heated, pneumatic dispenser includes a pressure -regulating stand with optional vertical application stand and foot switch for hands - free application. For available spare parts and dispense nozzles, please visit www.equipment.loctite.com.

Item Number: 98011Dimensions: 217⁄32" W x 1113⁄16" L x 915⁄32" HWeight: 3 lbs.

POLY

OLEF

IN- B

ASED

10

BO

ND

ING

Ho

t M

elts

SPR

AYA

BLE

/EVA

-BA

SED

POLY

AM

IDE-

BA

SED

Loctite® Hysol® Hot Melt AdhesivesProperties Chart


Package Type & Size

DESCRIPTION DIAMETER LENGTHS LOCTITE® APPLICATORS BY ITEM #

Superstick™ 0.50" 4" / 10" 98544, 98545, 98032, 98029

Maxistick™ 0.75" 2.4" 98033, 98034

Polyshot™ 1.75" 1.5" 98035, 98036, 98040, 98037, 98041

Loctite® Hysol® Hot Melt Stick Chart

URET

HANE

-BA

SED

0420™ Hysol®

SprayPac™ 83346 Polyshot™ 12 oz. sample bag Cream Fast setting 10,500 N/A2 minutessprayed

153°F N/A N/A N/A

0430™ Hysol®

SprayPac™

8334883349

Polyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton

CreamMedium

open time5,000 280

3.5 minutessprayed

170°F N/A 75 N/A

0430™ Red Hysol®

SprayPac™

8335083351


PinkMedium

open time5,000 280

3.5 minutessprayed

170°F N/A 75 N/A

0437™ Hysol®

SprayPac™ 83352 36 lb. carton bricks CreamMedium

open time5,200 270

3.5 minutessprayed

170°F N/A 75 N/A

0450™ Hysol®

SprayPac™

8335383354


NaturalExtendedopen time

4,500 N/A5 to 8

minutes156°F N/A N/A N/A

0450™ Red Hysol®

SprayPac™

8335583356


PinkExtendedopen time

4,500 N/A5 to 8


0452™ Hysol®

SprayPac™ 83257 SprayPac™ 21 lb. pucks NaturalExtendedopen time

4,300 N/A5 to 8


3651™ Hysol® 31303 12 kg squares BeigePlasticbonder

10,000 33480 to 100seconds

266°F 790 55 N/A

3631™ Hysol® 3129131279

300 ml cartridge5 gallon pail

Off WhiteHigh

strength12,000 1,800

60seconds

250°F 940 91 N/A

7460™ Hysol®

SprayPac™ 83308 Polyshot™ 25 lb. pailPale/

AmberSprayable 6,700 N/A 30 seconds 210°F N/A N/A N/A

7500™ Hysol®

SprayPac™

8331283313

Polyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

Pale/Amber

Long opentime

1,900 N/A 2 minutes 200°F N/A N/A N/A

7804™ Hysol® 833258332683327833288332983330

5 lb. sample bag pellets40 lb. carton pelletsSuperstick™ 10" 5 sample oz. bagSuperstick™ 10" 32 lb. cartonPolyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

AmberHigh

viscosity7,500 340 35 seconds 220°F 900 74 N/A

7804FRM-HV™

Hysol®

8338283383833848338683387

40 lb. carton pelletsSuperstick™ 10" 5 oz. sample bagSuperstick™ 10" 30 lb. pailPolyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

Off WhiteFire

retardant6,000 245 35 seconds 220°F 300 N/A UL94V-0

7809FR™ Hysol® 833888339083391

5 lb. sample bag pelletsSuperstick™ 10" 13 oz. sample bagPolyshot™ 13 oz. bag

AmberFire

retardant7,000 363 35 seconds 240°F 373 85 UL94V-0

7811™ Hysol® 833378333983340

5 lb. sample bag pelletsPolyshot™ 10" 13 oz. sample bagPolyshot™ 25 lb. pail

AmberHigh

temperature6,400 400 35 seconds 266°F 1,200 N/A N/A

7901™ Hysol® 83341833428334383344

5 lb. sample bag pellets40 lb. carton pelletsPolyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

Amber Potting 750 260 35 seconds 300°F 80 84 N/A

VISC

OSIT

Y(c

P)AT

DIS

PENS

ETE

MPE

RATU

RE

COLO

R

ATTR

IBUT

ES

TENS

ILE

STRE

NGTH

(PSI

)

OPEN

TIM

E

TEM

PERA

TURE

RESI

STAN

CE

HARD

NESS

(SHO

RE A

)

AGEN

CYAP

PROV

ALS

% E

LONG

ATIO

N


11

BO

ND

ING

Ho

t Melts

EVA

-BA

SED



Package Type & Size

VISC

OSIT

Y(c

P)AT

DIS

PENS

ETE

MPE

RATU

RE

COLO

R

ATTR

IBUT

ES

TENS

ILE

STRE

NGTH

(PSI

)

OPEN

TIM

E

TEM

PERA

TURE

RESI

STAN

CE

HARD

NESS

(SHO

RE A

)

AGEN

CYAP

PROV

ALS

% E

LONG

ATIO

N

1X™ Hysol® 833578335883359833608336283364833658336783368

5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ 7 oz. sample bagMaxistick™ 35 lb. cartonPT™ stick 36 lb. cartonSuperstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. cartonPolyshot™ 12 oz. bagPolyshot™ 35 lb. Carton

LightYellow

Fast setting 2,000 37015

seconds150°F 90 N/A

FDACFR175,105

3X™ Hysol® 8336983370

Polyshot ™ 12 oz. sample bagPolyshot ™ 35 lb. carton

TanPorous

substrates4,000 580

60seconds

135°F 300 N/AFDA

CFR175,105

0232™ Hysol® 83237832398324183244832458324683247

5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ 35 lb. cartonSuperstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. cartonPolyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton

ClearMedium

open time11,000 N/A

15seconds

153°F N/A N/AFDA

CFR175,105

236™ Hysol® 8325183252

Superstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. carton

ClearMediumviscosity

8,500 21325


FDACFR175,105

342™ Hysol® 83255 Polyshot™ 35 lb. carton Cream Fast setting 8,250 800 5 seconds 166°F 60 N/AFDA

CFR175,105

740™ Hysol® 83260832618326383264

Superstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. cartonPolyshot ™ 12 oz. sample bagPolyshot ™ 35 lb. carton

LightYellow

High strength 9,000 75010


FDACFR175,105

740LV™ Hysol® 8337383374

40 lb. carton pelletsPolyshot™ 35 lb. carton

LightYellow

Hightemperature

3,500 70010


FDACFR175,105

1942™ Hysol® 8326683267832688326983271832728327383274832758327683277

5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ 7 oz. sample bagMaxistick™ 35 lb. cartonPT ™ stick 35 lb. cartonMinistick™ 35 lb. cartonSuperstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. cartonSuperstick™ 4" 25 lb. cartonPolyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton

TanGeneralpurpose

5,000 25030


FDACFR175,105

4046™ Hysol® 8327883279

Polyshot ™ 12 oz. sample bagPolyshot ™ 35 lb. carton

CreamExtendedopen time

19,000 12060

seconds120°F 1,400 40 N/A

6002™ Hysol® 8328383285

Superstick™ 10" 25 lb. cartonPolyshot™ 35 lb. carton

Amber Fast setting 3,500 70010


FDACFR175,105

CoolMelt™

Hysol®

8339383394

CoolMelt™ Maxistick™ 7 oz. sample bagCoolMelt™ Maxistick™ 35 lb. carton

Off WhiteLow

temperature7,200 195

15seconds

140°F 800 N/AFDA

CFR175,105

SuperPac™

Hysol®

83402834038340483405

Maxistick™ 7 oz. sample bagMaxistick™ 35 lb. cartonPolyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton

LightYellow

Cardboardbonder

5,750 28030


FDACFR175,105

QuikPac™

Hysol®

8339583397833988339983400

5 lb. sample bag pellets Maxistick™ 7 oz. sample bagMaxistick™ 35 lb. cartonPolyshot™ 12 oz. sample bagPolyshot™ 35 lb. carton

LightYellow

Low viscosity 4,645 N/A15

seconds174°F N/A N/A

FDACFR175,105

WaxPac™

Hysol®

8340883410

Maxistick™ 7 oz. sample bagPolyshot™ 12 oz. sample bag

TanWax coating

bonder2,700 730

30seconds

150°F N/A N/AFDA

CFR175,105


12

BO

ND

ING

Lig

ht C

ure

Ad

hesi

ves

Light Cure Adhesives

Versatile Loctite® ultraviolet (UV) and visible light curing adhesives can be usedin bonding, encapsulating, coating, tacking and sealing applications. Thesesingle -component, solvent-free products cure in seconds when exposed toUV/visible light sources. Some light cure adhesives can be combined withactivator -curing methods to meet specific application requirements.

NEW

NEW

NEW

NEW

EPOXY ADHESIVESLOCTITE® 3335™ LIGHT CURE ADHESIVEUV Cationic EpoxyA one-part, medium viscosity,cationic epoxy. Excellent for surfacecure – no oxygen inhibition. Lowoutgassing, very good hightemperature resistance. Rigid, lowshrinkage.

LOCTITE® 3336™ LIGHT CURE ADHESIVEA UV cure, medium viscosity, two-part epoxy. UV cure effects fastgelation. Complete cure at roomtemperature or heat cure. Tough and durable. Designed for potting,bonding, and sealing.

LOCTITE® 3337™ LIGHT CURE ADHESIVEUV Cationic EpoxyA one-part, flexible, mediumviscosity, cationic epoxy. Excellentfor surface cure with low shrinkageand low outgassing. Use for bonding,coating and tacking applications onmetal, plastic or glass substrates.

LOCTITE® 3340™ LIGHTCURE ADHESIVEUV Cationic EpoxyA one -part, rigid, medium viscosity,cationic epoxy. Exhibits goodthermal, water and chemicalresistance with metal, plastic and glass substrates.

LOCTITE® 3355™ LIGHT CURE ADHESIVEPre - Activated EpoxyA UV cure, medium viscosity, one -part epoxy. Unique delay feature allows UV cure of non-light-transmitting substrates. Extremelylow shrinkage is ideal whenalignment of small parts is critical.Low outgassing and acid free.

CYANOACRYLATE ADHESIVESLOCTITE® 4306™/4307 ™ FLASHCURE®

LIGHT CURE ADHESIVESInstant AdhesiveNew, patented technology. One-component, low or highviscosity fluorescent adhesives.Specifically formulated forextremely rapid UV or visible lightcure and secondary cyanoacrylatecure mechanism. Eliminates theneed for solvent-based accelerators.

SILICONE ADHESIVESLOCTITE® 5031™ NUVA-SIL®

SILICONE POTTING COMPOUNDHigh Adhesion/Visible LightA UV or visible light curing siliconefor high speed potting, coating andsealing applications. High adhesionfor difficult-to-bond substrates.

LOCTITE® 5033™ NUVA-SIL®

SILICONE ADHESIVE SEALANTPaste / High Adhesion / Visible LightA UV or visible light and moisture curing silicone for high speed adhesion and sealingapplications. High adhesion fordifficult- to-bond substrates.


SILICONE ADHESIVE SEALANTCure - In - Place Gasketing CompoundA UV or visible light and moisturecuring silicone for high speedadhesion, gasketing and sealingapplications. High adhesion fordifficult- to -bond substrates.

ACRYLIC ADHESIVES

LOCTITE® 352™ LIGHT CURE ADHESIVEA high viscosity adhesive thatcreates a tough, flexible bond that is resistant to vibration andshock. Effective on a wide range of materials. Cures in minutesusing an activator, UV light, or both.

LOCTITE® 3103™ LIGHT CURE ADHESIVEThixotropic, flexible, low modulus,medium viscosity, UV/visible lightcure adhesive for flexible bonds andreduced stress cracking on plastics.Cures through UV blocked andtinted substrates. Also for potting,sealing, and gap filling.

LOCTITE® 3105™ LIGHT CURE ADHESIVEA high strength, low viscosity,UV/visible light cure adhesive.Primarily designed for bonding rigidand flexible PVC to polycarbonate.Enables easy assembly ofcomponents with close -fittingtolerances. Recommended forapplications involving small gapsless than 0.25 mm.

LOCTITE® 3106™ LIGHT CURE ADHESIVEA high strength, medium viscosity, thixotropic, UV/visiblelight cure adhesive. Designedprimarily for bonding rigid andflexible PVC to polycarbonatewhere large gap filling capabilities and a flexible joint are desired.

ACRYLIC ADHESIVES

LOCTITE® 3107™ LIGHT CURE ADHESIVEA low viscosity, UV/visible light cureadhesive for difficult-to -bondplastics including plasticized PVC.Very rapid cure. Flexibleand fluorescent.

LOCTITE® 3108™ LIGHT CURE ADHESIVEA low durometer, rubbery, UV cureadhesive for potting and sealing ofplastic, glass, and metal. Veryflexible and resilient.

LOCTITE® 3175™ LIGHT CURE ADHESIVEA solvent-free adhesive designed forapplications where a rapid cure anda dry- to - the - touch surface arerequired. Excellent for tacking andcoating. Good adhesion to plastics.

LOCTITE® 3491™ LIGHT CURE ADHESIVEA fast curing, medium viscosityadhesive designed for bonding glass - to - glass and to a variety ofother surfaces.

LOCTITE® 3492™ LIGHT CURE ADHESIVEA fast curing, low viscosity adhesivedesigned for bonding glass -to-glassand to a variety of other surfaces.

ACRYLIC ADHESIVESLOCTITE® 3494™ LIGHT CURE ADHESIVEA durable, UV/visible cure, mediumviscosity adhesive designed for glassand metal bonding.

LOCTITE® 3525™ LIGHT CURE ADHESIVEA UV/visible cure, high viscosityadhesive. Fast cure, colorless bonds.Excellent flexibility, toughness, anddurability to moisture exposure.Fluorescent. Used to bond glass,metal, and plastics.

LOCTITE® 3526™ LIGHT CURE ADHESIVEA UV/visible/heat cure version ofLoctite® 3525™ Light Cure Adhesive.All the properties of Loctite® 3525™plus low temperature, rapid, heat curecapabilities (250°F). Fast cure evenunder low energy sources. Fluorescent.

LOCTITE® 3552™/3553™ INDIGO™

VISIBLE LIGHT CURE ADHESIVESHigh and low viscosity adhesives that cure in the visiblespectrum offering properties andperformance similar to mostUV/visible adhesives. Visible lightadhesives cure with uniquesystems that minimize venting orspecialized safety equipment.Benefits include lower initialinvestment and reducedmaintenance costs.

13

BO

ND

ING

Light C

ureA

dhesives

NEW

14

BO

ND

ING

Lig

ht C

ure

Ad

hesi

ves

EPO

XY A

DH

ESIV

ESCY

AN

OACR

YLAT

EA

DH

ESIV

ESSI

LICO

NE

AD

HES

IVES

Loctite® Light Cure Adhesives Properties Chart


PackageType & Size KE

YSU

BSTR

ATES

APPE

ARAN

CE,

CLAR

ITY,

AND

COLO

R

CURE

TYP

E

AGEN

CYAP

PROV

ALS

VISC

OSIT

Y (c

P),

BROO

KFIE

LD,2

5°C

ELON

GATI

ON A

TBR

EAK

(%)

TEM

PERA

TURE

RANG

E

SHOR

E HA

RDNE

SS

3335™ 3028830289

25 ml syringe1 liter bottle

Clear/ColorlessUltraviolet,

cationicMetal, glass, thermoplastic 6,000 2 D 84

-65°F to325°F

N/A

3336™ 3106431065

42 ml dual syringe400 ml dual syringe

Clear/LightAmber

Ultraviolet, roomtemperature, heat

Metal, thermoplastic 14,500 6 D 79-65°F to350°F

N/A

3337 ™ 3605736058*


ClearUltraviolet,

cationicMetal, glass 5,000 7 D 80

-65°F to350°F

N/A

3340™ 3690636907*


TransparentUltraviolet,

cationicMetal, glass 6,000 5 D 83

-65°F to350°F

N/A

3355™ 4079240793


Hazy WhiteUltraviolet,delay cure

Metal, plastic, glass,ceramic

5,000 11.5 D 77-65°F to350°F

N/A

4306™

Flashcure®

3743937442


Clear/Pale Green/Fluorescent

Ultraviolet,visible, moisture

Elastomer, metal,polycarbonate, thermoplastic

20 9 D 72-65°F to180°F

ISO-10993Compliant

4307™

Flashcure®

3744137443



Ultraviolet,visible, moisture

Elastomer, metal,polycarbonate, thermoplastic

900 6 D 477-65°F to180°F

ISO-10993Compliant

5031™

Nuva-Sil®

4008640087

300 ml cartridge40 lb. pail

TranslucentVisible, ultraviolet,moisture, acetoxy

Glass, metal, ceramic 5,500 100 A 34-65°F to350°F

N/A

5033™

Nuva-Sil®

4008840089


Translucent/ Colorless/

Fluorescent

Visible, ultraviolet,moisture, acetoxy

Glass, metal, ceramic145

g/min.†170 A 55

-65°F to350°F

N/A

5039™

Nuva-Sil®

4043840439


Translucent/ Colorless/

Fluorescent

Visible, ultraviolet,moisture, acetoxy


g/min.†210 A 37

-65°F to350°F

N/A

5083™

Nuva-Sil®

1752817635


Translucent/ Colorless

Ultraviolet,moisture, acetoxy


g/min.†170 A 55

-65°F to350°F

UL Classifiedfor U.S.

5091™

Nuva-Sil®

1741218074


Translucent/ Colorless

Ultraviolet,moisture, acetoxy

Glass, metal, ceramic 5,500 100 A 34-65°F to350°F


Indicates worldwide availability. * Made-to-order item. † Extrusion rate, grams/minute, 1/8" orifice at 90 psi.


NEW

NEW

NEW

NEW

NEW

See our Loctite® Equipment Sourcebook, LT-3669or visit us at www.equipment.loctite.com

for more details.

Loctite® 300 ml Pneumatic CartridgeDispenser is a manually -controlled,pneumatically -operated unit fordispensing modified silanes packaged in 300 ml cartridges. The operator controlsthe amount and rate of applicationusing the dispense pressure, orifice size,and manual trigger. For available valves, spare parts, accessories anddispense tips, please visit www.equipment.loctite.com.

Item Number: 97002Dimensions: 8" H x 13.5" L x 1.5" DWeight: 18 lbs. (800 g)

Loctite® Stainless Steel Poppet Valve isa double -acting dispense valve. Easilyadapts to 300 ml cartridges or pailpump systems to dispense medium tohigh viscosity, modified silanes. Thisvalve features suck -back capability andoperates at fluid pressures up to 650 psi. For available spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Number: 982621Dimensions: 5.28" H x 2.00" DWeight: 4.2 lbs. (1.9 kg)

LOCTITE® MS 930™

ELASTIC SEALANTHigh elongation and good peel strength make this product a great choice for aggressive seamsealant applications.

LOCTITE® MS 939™

ELASTIC ADHESIVEAdhesive/SealantHigh elongation and tensilestrength give this product thebest of both worlds. With goodadhesion to many substrates, andgood impact and peel resistance,this product is a great fit for both bonding and sealing applications.

LOCTITE® MS 9360™

ELASTIC ADHESIVEThis product exhibits the highestshear strength on a majority ofsubstrates versus the other productsin this line.

16

BO

ND

ING

Mo

difi

ed S

ilane

s

Modified Silanes

When in contact with ambient moisture, modified silanes begin to curein the same manner as silicones. Ideal for bonding and sealing amultitude of substrates, as well as many applications where siliconescannot be used due to their incompatibility with paint systems.

DISPENSING OPTIONS

NEW

NEW

NEW

Modified silane adhesives are our newest Loctite® product line. These products exhibit highflexibility and low durometer while maintaining high tensile strength and good adhesion tomany substrates without the use of a primer. These products are isocyanate, and solvent free,non-corrosive, and are compatible with most paint systems.


Package Type & Size

17

BO

ND

ING

Mo

dified

Silanes

MS 930™413784138541383

300 ml cartridge20 kg pail250 kg drum

Black1.44 to

1.50150 to

250Moisture

10 to 40minutes

-40°F to200°F

20 to 30 490 135 120 1.3 18.7

MS 939™413804138741382


Black1.43 to

1.4920 to 160

Moisture3 to 12minutes

-40°F to200°F

52 to 62 500 390 270 2.4 20.1

MS 9360™413794138641384


Black1.32 to

1.4220 to 120


-40°F to200°F

55 to 60 225 475 425 1.72 17.5

Loctite® MS Polymer AdhesivesProperties Chart

COLO

R

EXTR

USIO

N RA

TE(g

/min

ute)

**

CURE

MET

HOD

SKIN

OVE

RTI

ME

SHEA

RST

RENG

TH*

(PSI

)

T-PE

EL (P

LI)

IMPA

CTST

RENG

TH (J

/in.2 )

SPEC

IFIC

GRAV

ITY

TEM

PERA

TURE

RANG

E

DURO

MET

ER(S

HORE

A)

ELON

GATI

ON

TENS

ILE

STRE

NGTH

(PSI

)

NEW

NEW

NEW

* Tensile Strength tested on grit blasted steel.** Evaluated at 23°C, 3.5 mm diameter, 3 bar, for 15 seconds.

LOCTITE® HIGH VISCOSITY PASTE PUMP SYSTEMSThese systems are designed specifically to dispense paste products packaged in open- top pails or drums.Various pump ratios are suited for pumping medium tohigh-viscosity pastes. High viscosity paste pump systemsare fully assembled and consist of an air motor, pumptube, and pressure ram.

DISPENSING OPTIONS


ItemNumber

RatioOutput

perStroke

MaterialPackage

Size

MaximumProduct

Viscosity (cP)

988715 22:1 6.7 in3 Carbon Steel 250 kg 500,000


988717 22:1 6.7 in3 Inert Metal 250 kg 500,000

988718 22:1 6.7 in3 Inert Metal 25 kg 500,000

988843 22:1 6.7 in3 Carbon Steel w/Inert Seals 25 kg 500,000


988719 44:1 6.7 in3 Carbon Steel 250 kg 1,000,000


988721 44:1 6.7 in3 Inert Metal 250 kg 1,000,000

988722 44:1 6.7 in3 Inert Metal 25 kg 1,000,000

988844 44:1 6.7 in3 Carbon Steel w/Inert Seals 25 kg 1,000,000




988725 64:1 4.6 in3 Inert Metal 250 kg 4,000,000

988726 64:1 4.6 in3 Inert Metal 25 kg 4,000,000



18

BO

ND

ING

So

lven

t-B

ased

Ad

hesi

ves

Solvent-Based Adhesives

SOLVENT-BASEDLOCTITE® BLACK CONTACT ADHESIVEA professional, solvent-basedadhesive with neoprene that blends in with black colored fabrics,rubbers, weather-stripping andother porous materials. Withstandstemperature extremes and isresistant to gasoline, kerosene, and other solvents. Fast drying andwaterproof. Allows repositioning of the parts after initial contact.

LOCTITE® CONTACT ADHESIVEA fast-drying, solvent-based adhesivewith neoprene that bonds rubber,insulation, weather-stripping, andother porous materials. Sets to atack-free surface in 3 to 4 minutes,and the early strength is enough to hold most parts together. Allowsrepositioning of the parts afterinitial contact.

SPRAY ADHESIVESLOCTITE® MAXIMUM STRENGTHHEADLINER ADHESIVEA high strength, aerosol productdesigned for bonding foam, carpet,fabrics, plastics, rubber, etc. Loctite®Maximum Strength HeadlinerAdhesive is resistant to extremeseasonal temperatures, is water-resistant, and sprays on clear.

LOCTITE® ALL-PURPOSE SPRAY ADHESIVEBonds lightweight, porous, and non-porous surfaces. Allows forrepositionable and permanent bonds.Fast drying; won’t shrink or bleed.Resists water and humidity. Containsno ozone-depleting compounds.

Loctite® solvent -based aerosol and liquid adhesives provide a combinationof cure speed, impact resistance, strength, temperature range, and solventand moisture resistance to meet tough on-the-job requirements.

19

BO

ND

ING

So

lvent-Based

Ad

hesives

SOLV

ENT-

BA

SED

SPR

AYA

DH

ESIV

ES


Package Type & Size

Loctite® Rubber-Based AdhesivesProperties Chart

TEM

PERA

TURE

RANG

E

COLO

R/AP

PEAR

ANCE

FIXT

URE/

BOND

TIM

E

FULL

CUR

E

COM

MON

SURF

ACES

ADHE

SIVE

WIL

L BO

ND

AGEN

CYAP

PROV

ALS

Black ContactAdhesive

30540 5 fl. oz. tubeUp to 180°F

Black GelLet breathe 2-3

minutes, sets up in 5to 15 minutes.

24 hours atambient

temperature

Weather-stripping,vinyl, rubber,

wood, and metal

CFIA

Contact Adhesive 30537 5 fl. oz. tubeUp to 180°F

Yellow Gel CFIA

Maximum StrengthHeadliner Adhesive

37312 16.75 oz. net wt. aerosolUp to170°F Clear Drying,

Semi-TranslucentFoam

Let dry 15 to 20 minutesbefore assembly.

Spray both sides for maximum strength.

24 hours atambient

temperature

Foam, carpet,fabrics, plastics,

and rubber

N/A

All-PurposeSpray Adhesive

30544 10.5 oz. net wt. aerosolUp to120°F

N/A

For faster fixturing of these solvent-based contact adhesives, apply theadhesive to both sides of the parts,and allow to breathe for one to twominutes. When the surface starts toappear dry, apply a small additionalamount of adhesive to one side andassemble the sides together.The bond will be instant!

20

BO

ND

ING

Structural AcrylicAdhesives

Loctite® structural acrylic adhesives were developed for structuralbonding applications that require tensile, shear and peel strengthcombined with maximum impact, stress and shock resistance.Available in two major categories:

• Two-Step No-Mix Structural Acrylics• Two-Part Structural Acrylics

Two-Step No-Mix Structural Acrylic Adhesives – when incontact with a liquid activator, these no-mix materials cure rapidly at roomtemperature to a weather-resistant bond. Ideal for close - fitting parts andwhere extended open time is required.

Str

uctu

ral

Acr

ylic

Ad

hesi

ves

LOCTITE® 324™ SPEEDBONDER™

STRUCTURAL ADHESIVEHigh ImpactIdeal for large gap applications.Offers the strength of an epoxy andthe speed of an instant adhesive.Solvent resistant. Cures in minutes.Specially formulated for toughnessand impact strength.


STRUCTURAL ADHESIVEHigh TemperatureSolvent resistant, activator-cured in minutes. Forms flexible bonds on gaps up to 0.40". Designed forsevere environments andtemperatures to 350°F.


STRUCTURAL ADHESIVEFast FixtureAn all-purpose bonder. Offers thestrength of an epoxy and the speedof an instant adhesive. Solventresistant. Cures in minutes. Ideal forapplications requiring fast fixturing.

LOCTITE® 330™ DEPEND® ADHESIVEGeneral PurposeA general purpose, high viscosityadhesive for a wide range ofmaterials, including metal, wood, ferrite, ceramic, and plastic.

LOCTITE® 332™ STRUCTURAL ADHESIVESevere EnvironmentAn activator-cured, no-mix adhesive that provides hightemperature capability with thermal durability up to 400°F.

LOCTITE® 334™ STRUCTURAL ADHESIVEToughened/Magnet BonderSingle component, dual -cure acrylic. Forms tough, flexiblebonds on gaps up to 0.02".

LOCTITE® 392™

STRUCTURAL ADHESIVEFast Fixture/Magnet BonderSingle component, dual-cureacrylic. Provides fast fixture speed and tough reliable bonds.

� Activators are used to promote the cure speedof any Loctite® 2-step acrylic adhesive. Selectthe right Loctite® activator for your application.Loctite®

For Use withActivators Base Loctite® Product7075™ Acetone 324™ and 325™

Speedbonder™ Adhesives7380™ Solvent-free All Speedbonder™Adhesives7387™ Heptane/ Most Speedbonder™

Isopropanol AdhesivesFor ordering information, please see pages 98-99 inthe Surface Preparation Section

Structural

Acrylic A

dhesives

BO

ND

ING

21

Two-Part Structural Acrylic Adhesives – when statically mixed, these adhesives develop a tough,durable bond to a wide variety of substrates, including metals, plastics, and composites. Loctite® two-part structuralacrylics are ideal for large gap filling applications. They are available in mixer-friendly packaging to minimize wasteand process time. Refer to the Loctite ® Equipment Sourcebook, LT-3669, for available dual cartridge dispensers and mixnozzles, or visit our equipment website at www.equipment.loctite.com.

GENERAL PURPOSELOCTITE® H3000™ SPEEDBONDER™

STRUCTURAL ADHESIVEMedium FixtureA low viscosity adhesive ideal forbonding a variety of substrates.

LOCTITE® H3101™ SPEEDBONDER™

STRUCTURAL ADHESIVEMedium Fixture/Open timeA medium viscosity adhesive ideal for bonding a variety of substrates.


STRUCTURAL ADHESIVEFast FixtureA non-sag, fast fixturing structuraladhesive for bonding a variety of substrates.

METAL BONDING


STRUCTURAL ADHESIVEExtended Open timeExtended open time allows foradjustment of parts. Excellentbond strength on aluminum and steel. Impact and peel resistant.


STRUCTURAL ADHESIVEFast FixtureHigh strength structural adhesivefor metals. Fixtures in 10 minutes.


STRUCTURAL ADHESIVECorrosion ResistantMaintains superior strength incorrosive environments. Excellentgeneral purpose metal bonder.

PLASTIC/COMPOSITE BONDINGLOCTITE® H4000™ SPEEDBONDER™

STRUCTURAL ADHESIVENon-SagA fast fixturing structural adhesive for bonding various plastic andcomposite substrates, including epoxy coat and glass fiber reinforced polyester.


STRUCTURAL ADHESIVEToughenedA plastic and composite bonder withhigh peel and impact resistance. Fixtures in 15 minutes.


STRUCTURAL ADHESIVEToughenedProvides extended open time,making it ideal for the assembly and adjustment of large parts.Excellent peel and impactresistance. Provides high bond strengths on composites.


STRUCTURAL ADHESIVEUV ResistanceA white UV resistant adhesive idealfor bonding gel-coated surfaces.Excellent non-sagging properties.Longer open time allows for theadjustment of larger parts.

HIGH TOUGHNESS


STRUCTURAL ADHESIVEFast FixtureFeatures fast fixture time and excellent peel strength on multiple substrates, especially aluminum.


STRUCTURAL ADHESIVEUltra ToughExcellent peel strength on steel andaluminum. Provides extended opentime making it ideal for assemblyand adjustment of large parts.

HIGH TEMPERATURE/CHEMICAL RESISTANCE


STRUCTURAL ADHESIVEGalvanized BonderExcellent impact and shear strength on steel and aluminum.Especially designed for severe environments.

POLYOLEFIN BONDING

LOCTITE® 3032™

STRUCTURAL ADHESIVEFast FixtureA fast curing thixotropic acrylicadhesive. Designed to bond lowenergy plastic substrates. Excellent polypropylene bonder.

LOCTITE® 3034™

STRUCTURAL ADHESIVEToughenedExtended open time allows foradjustment of parts. Excellent peel and shear strength onpolyethylene plastics.

NEW

NEW

NEW

22

Str

uctu

ral

Acr

ylic

Ad

hesi

ves

BO

ND

ING


Package Type & Size

312™

Speedbonder™

03333001443123131243

10 ml kit 1

50 ml kit 2

50 ml bottle1 liter bottle

Fast cure on close

fitting partsAmber 0.003" 1,000 3,000

-65°F to300°F

Fixture – 30 sec.*Full – 24 hrs.

736™ 1.08 N/A

324™

Speedbonder™3243032490


High impactapplications

Amber 0.040" 17,000 3,600-65°F to300°F

Fixture – 5 min.Full – 24 hrs.

7075™ 1.11 N/A

325™



Severeenvironmentapplications

TransparentDark Brown

0.040" 20,000 2,200-65°F to300°F


7075™ 1.11 N/A

326™

Speedbonder™ 3262932685


Fast fixturingapplications

TransparentDark Brown

0.020" 18,000 3,500-65°F to250°F


7649™ 1.10 N/A

330™

Depend®

202532025120252330583306433081

3 ml kit 3

25 ml kit 4

250 ml kit 5

250 ml tube300 ml cartridge1 liter bottle

Rough orporous

surfaces

Pale Yellow

0.030" 67,500 3,300-65°F to250°F

Fixture – 5 min.*Full – 24 hrs.

7387™or

7380™1.05 CFIA

332™332013327533290

25 ml syringe300 ml cartridge1 liter bottle

Hightemperatureapplications

Pale Yellow

0.020"75,000 /130,000

3,000-65°F to400°F


7387™or

7380™0.97 N/A

334™

3340333470

25 ml syringe300 ml cartridge

Tough magnetbonder

Pale Yellow

0.020"80,000 /140,000

Thixotropic2,800

-65°F to200°F


7387™ or

7380™1.05 N/A

392™392503927539280

50 ml tube300 ml cartridge1 liter bottle

Fast fixturingmagnetbonder

Amber 0.025"6,500 /17,500

Thixotropic2,500

-65°F to250°F


7387™ or

7380™1.16 N/A

* Varies with substrates.1 Contains 10 ml bottle of Loctite® 312™ Speedbonder™ and 40 g aerosol can of Loctite® 736™ Primer NF™.2 Contains 50 ml bottle of Loctite® 312™ Speedbonder™ and 6 oz. aerosol can of Loctite® 736™ Primer NF™.3 Contains 0.2 fl. oz. tube of Loctite® 330™ Depend® Adhesive and 0.7 fl. oz. ampule of Loctite® 7387™ Depend® Activator.4 Contains 25 ml syringe of Loctite® 330™ Depend® Adhesive and 25 g aerosol can of Loctite® 7387™ Depend® Activator.5 Contains 250 ml tube of Loctite® 330™ Depend® Adhesive and 4.5 fl. oz. aerosol can of Loctite® 7387™ Depend® Activator.

TYPI

CAL

USE

COLO

R

GAP

FILL

VISC

OSIT

Y (c

P)

at 2

0 RP

M

SHEA

R ST

RENG

TH*

(PSI

)

TEM

PERA

TURE

RANG

E

CURE

SPE

ED

RECO

MM

ENDE

DPR

IMER

SPEC

IFIC

GR

AVIT

Y

AGEN

CYAP

PROV

ALS

Loctite® Two-Step, No-Mix Structural AcrylicsProperties Chart



DISPENSING OPTIONS

Loctite® 50 ml Hand Pumps are portable, precision, bottle - top applicators thatthread directly onto any 50 ml Loctite® bottle. Theyare designed to dispense at any angle from 0.01 to0.04 ml without leaks or product waste.

For available spare parts, accessories and dispensetips, please visit www.equipment.loctite.com.

Item Number: 98414Dimensions - Pump: 4" H x 5.75" W x 1.5" DDimensions - Stand: 4.5" H x 3.75" W x 2.25" D

Loctite® Dispense TipsHenkel offers a comprehensive line of Loctite® taperedpolyethylene and flexible polypropylene dispense tips. All tipsare designed to stay intact during the toughest applicationsand provide reliable and consistent dispensing shot after shot.

For available accessories and dispense tips, please visit www.equipment.loctite.com.

Loctite® Cartridge Dispense Tip,1⁄4" Male NPTItem Number: 98128

23

BO

ND

ING

Structural

Acrylic A

dhesives

DISPENSING OPTIONS Loctite® Mix Nozzles are plastic,disposable nozzles that attach directly to Loctite® Speedbonder™ dual cartridges. They are designed to automatically mix adhesive as it travels through the static - mix nozzle.

For available dispense tips and package sizes, please visit www.equipment.loctite.com.

Item Numbers: 98473, 98454, 98463, 98474,98459, and 98461Item Number: 98415 Item Number: 98466

GEN

ERA

L PU

RPO

SEPL

AST

IC/C

OM

POSI

TE B

ON

DIN

GM

ETAL

BON

DIN

GHI

GHTO

UGHN

ESS

HIGH

TEM

P./CH

EMIC

ALRE

SIST

ANCE

POLY

OLE

FIN

BO

ND

ING


Package Type & Size

H3000™

Speedbonder™

8300183000

50 ml dual cartridge400 ml dual cartridge

1:165,000 /24,000

Cream 512 to

1545 25 2,360 3,830 >1,740 >1,495 1,550 2,510 N/A

H3101™



1:195,000 /57,000

Cream15 to

2025 35

20 to25

1,610 2,510 >1,810 >1,565 1,420 2,080 N/A

H3300™

Speedbonder™

830208301983024*83022*

50 ml dual cartridge400 ml dual cartridge40 lb. pail, adhesive40 lb. pail, activator

1:1105,000 /120,000

Yellow 5 635 to

4020 1,700 3,350 >1,650 >1,425 1,880 990 N/A

H3151™



1:170,000 /70,000

PaleYellow

35 to40

60† 40 >42 3,600 3,770 >1,835 >1,440 1,570 1,590 N/A

H4500™

Speedbonder™ 83041 490 ml dual cartridge 10:154,000 / 54,000

PaleYellow

8 to10

10† 40 40 4,020 4,130 >1,760 >1,455 1,560 2,200 N/A

H4720™

Speedbonder™ 39011 490 ml dual cartridge 10:1700,000 /800,000

Grey50 to

80100 40 38 3,900 4,200 1,700 1,700 N/A >490 N/A

H4000™

Speedbonder™

8302583031*83028*

490 ml dual cartridge40 lb. pail, adhesive40 lb. pail, activator

10:1100,000 /

70,000Pale

Yellow8 14 45

20 to25

2,580 3,500 >1,645 >1,500 790 1,980NSF®

ANSI61

H4100™


PaleYellow

2 3-5 13 8 710 3,140 >1,725 >1,405 2,270 2,850 N/A

H4200™


PaleYellow

5 15 55 >42 2,870 4,020 >1,640 >1,520 740 2,440 N/A

H4800™

Speedbonder™

8304583047*83046*


10:150,000 /55,000

LightYellow

20 to25

35 50 >42 1,810 3,930 >1,725 >1,590 530 2,090 N/A

H6051™

Speedbonder™

830628306583063


10:1100,000/95,000

White30 to

3550 35 N/A 1,400 2,400 900 1,000 N/A N/A N/A

H8000™

Speedbonder™

3616035939*35940*


10:1160,000 /

40,000Green

10 to15

15 to20

50 to60

>42 3,000 3,500 >1,600 >1,500 460 1,740 N/A

H8500™

Speedbonder™

4088440888*40889*

490 ml dual cartridge5 gallon pail, adhesive5 gallon pail, activator

10:1600,000 /900,000

Grey20 to

3015 to

2070 to

80>42 2,600 2,900 1,100 1,600 N/A >960 N/A

H8600™

Speedbonder™

408753876238760*38761*

50 ml dual cartridge400 ml dual cartridge5 gallon pail, adhesive5 gallon pail, activator

2:180,000 / 95,000

Blue10 to

1540 to

4540

35 to40

4,500 5,500 >1,900 1,600 N/A >800 N/A

3030™ 37220 35 ml dual cartridge 10:130,000 /

5,000Off

White2 to 3 10 2 to 4 6 975 1,450 N/A N/A 1,330 2,000 N/A

3032™ 4075940760


10:115,000 /

3,000Clear

Yellow2 to 3 10 2 to 4 6 N/A N/A N/A N/A N/A N/A N/A

3034™ 960971960973


10:169,000 /

2,000Trans-lucent

10 to15

60 5 to 7 N/A N/A N/A N/A N/A N/A N/A N/A

Loctite® Two-Part StructuralAcrylics Properties Chart

Peel Strength measured on steel.Impact Strength measured on as-received aluminum.

* Made-to-order item.† Fixture time measured on steel.

VISC

OSIT

Y (c

P)(P

art A

/ Pa

rt B

)

MIX

RAT

IO

COLO

R (M

IXED

)

OPEN

TIM

E IN

MIN

UTES

FIXT

URE

TIM

EIN

MIN

UTES

PEEL

STR

ENGT

H (P

LI)

IMPA

CT S

TREN

GTH

(kJ/

m2 )

ALUM

INUM

SHE

ARST

RENG

TH (P

SI)

STEE

L SH

EAR

STRE

NGTH

(PSI

)

FIBE

RGLA

SS S

HEAR

STRE

NGTH

(PSI

)

ABS

SHEA

RST

RENG

TH (P

SI)

PVC

SHEA

RST

RENG

TH (P

SI)

GEL

COAT

SHE

ARST

RENG

TH (P

SI)

AGEN

CYAP

PROV

ALS


Loctite® Caulking Gun Conversion Kits for 50 ml Cartridgesprovide an inexpensive means of converting a householdcaulking gun into a hand held meter mix dispenser. Ideal for1:1, 2:1, and 10:1 ratio two-part adhesives.

For available spare parts and dispense tips, please visit www.equipment.loctite.com.

NEW

NEW

NEW

24

BO

ND

ING

Str

uctu

ral E

po

xy &

Ure

than

e A

dhe

sive

s

Structural Epoxy & Urethane Adhesives

Henkel offers a complete line of one-part and two-part epoxy and urethane adhesives for structural bonding. This Loctite® Hysol® line contains a wide range of application-specific products designed tooutperform the competition in all aspects:

• Better Adhesion • Better Flow • Less Odor • Higher Strength • Greater Durability • Improved Clarity

From fast setting to high temperature properties, Loctite® Hysol® epoxy and urethane adhesives offer a varietyof performance benefits to meet your assembly requirements.

FAST SETTINGLOCTITE® E-00CL™ HYSOL®

EPOXY ADHESIVELow OdorA clear, flowable, fast setting epoxywith a 5 -minute worklife.

LOCTITE® E-00NS™ HYSOL®

EPOXY ADHESIVENon-SagA translucent, controlled flow, lowodor epoxy with a 5-minute worklife.

LOCTITE® E-05CL™ HYSOL®

EPOXY ADHESIVEToughenedAn ultra clear, high peel, low odorepoxy with a 5 -minute worklife.


EPOXY ADHESIVEHigh StrengthA fast setting, low odor epoxy with a 5-minute worklife. Cures at room temperature to form a clear bondline.

LOCTITE® D609™ HYSOL®

EPOXY ADHESIVEClearA high performance epoxy with a 5 -minute worklife. Low odor, veryfast room temperature cure, heatresistant to 180°F.


EPOXY ADHESIVESandableA high strength, low odor epoxywith a 10-minute worklife. Blue, fast cure, gap filling.

GENERAL PURPOSELOCTITE® 0151™ HYSOL®

EPOXY ADHESIVEUltra ClearA general purpose, thixotropic paste epoxy with a 50-minuteworklife. Allows for extended adjustment time.

LOCTITE® E-30CL™ HYSOL®

EPOXY ADHESIVEGlass BonderAn ultra clear, low viscosity,impact resistant epoxy with a30-minute worklife.

LOCTITE® E-40FL™ HYSOL®

EPOXY ADHESIVEFlexibleA grey, impact resistant, toughenedepoxy with a 40 -minute worklife.

LOCTITE® E-60NC™ HYSOL®

EPOXY ADHESIVENon- Corrosive/PottingAn electronics -grade pottingcompound with a 60 -minuteworklife. Black, opaque, low viscosity, potting compoundwith excellent cure - through depth.

LOCTITE® E-90FL™ HYSOL®

EPOXY ADHESIVEFlexibleA grey, impact resistant, toughenedepoxy with a 90-minute worklife.

LOCTITE® U-09FL™ HYSOL®

URETHANE ADHESIVEHighly FlexibleA two-part, high performanceurethane adhesive for plastic bondingwith a 10-minute worklife. Ultraclear, impact resistant, high peel.

25

BO

ND

ING

Structural E

po

xy &U

rethane Ad

hesives

GENERAL PURPOSE CONT.LOCTITE® U-09LV™ HYSOL®

URETHANE ADHESIVELow ViscosityA two-part, high performanceurethane adhesive for plasticbonding with a 10-minute worklife.

HIGH TEMPERATURE/CHEMICAL RESISTANCE

LOCTITE® 1C™ HYSOL®

EPOXY ADHESIVEGap FillingA high viscosity paste with a 20-minute worklife. Excellent gapfilling capability and performanceproperties.

LOCTITE® E-20NS™ HYSOL®

EPOXY ADHESIVEMetal BonderA light tan, non-sag, high peel, high shear epoxy with a 20-minute worklife.

LOCTITE® E-214HP™ HYSOL®

EPOXY ADHESIVEHigh StrengthA one component, heat cure epoxy.Grey, temperature resistant, non-sag.

LOCTITE® 9340™ HYSOL® EPOXY ADHESIVEEnvironmental ResistanceA green, high viscosity epoxy with a 90 -minute worklife. Excellent high temperature and chemical resistance.

LOCTITE® 9432NA™ HYSOL®

EPOXY ADHESIVENon-SagA grey, one component paste, heat cure epoxy. Excellent hightemperature performance,excellent chemical resistance,surface insensitive.

GENERAL PURPOSE CONT.LOCTITE® 9459™ HYSOL®EPOXY ADHESIVEHigh Temperature ResistanceA one component, heat cure epoxy. Low viscosity, self - leveling.Light grey, excellent hightemperature performance, excellent chemical resistance.

HIGH TOUGHNESS


EPOXY ADHESIVEFast SettingA high strength epoxy with a 20 -minute worklife. Off white,toughened, high peel,high shear.


EPOXY ADHESIVEToughenedA high strength epoxy with a 60 -minute worklife. Off white, high peel, high shear.


EPOXY ADHESIVEUltra StrengthAn amber, non-sag, aerospace gradeepoxy with a 120-minute worklife.

LOCTITE® 3981™/3982™/3984™

HYSOL® EPOXY ADHESIVESHigh Performance/ Various SubstratesHighly fluorescent, one component,heat cure epoxy adhesives offeringsuperior physical, environmentaland performance properties.

LOCTITE® 3985™ HYSOL® EPOXY ADHESIVENon-SagA one component, heat cure epoxy. Ideal for bonding wires to motor armatures.

LOCTITE® 9430™ HYSOL® EPOXY ADHESIVEHigh StrengthAn off white, toughened, light paste,high peel, high shear strength epoxywith a 40 -minute worklife.

GENERAL PURPOSE CONT.LOCTITE® 9433™ HYSOL® EPOXY ADHESIVESelf -LevelingA high strength epoxy with a 30 -minute worklife. Cream in color, flowable, toughened,high peel resistance.

LOCTITE® 9460™ HYSOL® EPOXY ADHESIVENon-SagA grey, impact resistant, highviscosity, high peel, high shearepoxy with a 30 -minute worklife.

LOCTITE® U-05FL™ HYSOL®

URETHANE ADHESIVEHigh StrengthA two-part, high performanceurethane adhesive for metal bondingwith a 5-minute worklife. Off white,highly flexible, impact and moistureresistant, high peel, high shear.

DISPENSING OPTIONS

Loctite® 50 ml Dual Cartridge ManualApplicator provides a convenient, cost - effective method to apply productwith minimal waste. This applicator iscompatible with 1:1 and 2:1 mix ratioproducts. For additional accessories,dispense tips and spare parts,please visit www.equipment.loctite.com.

Item Number: 98472

Loctite® 200/400 ml Dual CartridgeManual Applicators are ideally suitedfor production line applications andprovide a convenient, cost - effectivemethod to apply product with minimalwaste. These applicators are availablefor 1:1, 2:1 and 10:1 mix ratio products.For additional accessories, dispense tipsand spare parts, please visit www.equipment.loctite.com.

Item Numbers:983436, 983438 and 985246

26

BO

ND

ING

Str

uctu

ral E

po

xy &

Ure

than

e A

dhe

sive

s

GEN

ERA

L PU

RPO

SE

Loctite® Hysol® Structural Epoxy & UrethaneAdhesives Properties Chart


Package Type & Size

FEAT

URES

COLO

R

VISC

OSIT

Y AT

25°

C

WOR

KLIF

E

MIX

RAT

IO B

Y VO

LUM

E(R

ESIN

:HAR

DENE

R)

OVER

LAP

SHEA

RST

RENG

TH*

(PSI

)

AGEN

CYAP

PROV

ALS

Tg °

C

HARD

NESS

(SHO

RE D

)

PEEL

STR

ENGT

H(P

IW)

E-00CL™

Hysol®

292892929029291

50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge

Fast setting,flowable, low odor

ClearResin – 9,300 cPA

Hardener – 2,700 cPA3 to 5 min.

1:1 1-52,000 to

4,00020 80 CFIA

E-00NS™

Hysol®

292942929529296


Non-sag,controlled flow,

low odor

Trans-lucent

Resin – 375,000 cPAHardener – 2,800 cPA

3 to 5 min.

1:1 1-52,000 to

4,00020 80 CFIA

E-05CL™

Hysol®

29299293002930129302**29303**

50 ml dual cartridge200 ml dual cartridge400 ml dual cartridge5 gallon pail, resin5 gallon pail, hardener

Toughened,high peel, low odor

UltraClear


3 to 5 min.

1:1 5-302,000 to

4,00010 55 CFIA

608™

Hysol®

83086830758308283083**83088**83087**

4 g foil pack50 ml dual cartridgeEPK 2.8 oz. kit5 lb. kit45 lb. pail, resin45 lb. pail, hardener

Fast cure,clear, high strength

ClearResin – 325,000 cPA

Hardener – 30,000 cPA5

min.1:1 N/A 2,000 N/A 80 CFIA

D609 ™+

Hysol ® 83089 50 ml dual cartridgeFast cure,

clear, high strengthClear


5min.

1:1 N/A 2,800 N/A 75 N/A

615™

Hysol®

8309483095**

EPK 3.2 oz. kit12 lb. kit

Fast cure,gap filling, sandable

BlueResin – 700,000 cPA


min.1:1 N/A 2,500 N/A 65 CFIA

0151™

Hysol®

8306983176831798317883181**83180**

50 ml dual cartridgeEPK 3.3 oz. kit2.6 lb. kit10.7 lb. kit40 lb. pail, resin6.8 lb. can, hardener

General purpose,ultra clear,

extended work lifeClear


50min.

2.7:1 N/A 1,850 58 85 CFIA

E-30CL™

Hysol®

293292933029331


Glass bonder,low viscosity,

impact resistant

UltraClear


30min.

2:1 5-302,000 to

4,00070 85 CFIA

E-40FL™

Hysol®293042930529306


Toughened, flexible,impact resistant

GreyResin – 75,000 cPA


min.1:1 5-40

1,000 to3,000

30 75 CFIA

E-60NC™

Hysol®

293242932529326


Potting††, electricallynon-corrosive,low viscosity

BlackOpaque


60min.

1:1 1-51,000 to

3,00055 85 CFIA

E-90FL™

Hysol®

29309293102931129312**29313**


Toughened, flexible,impact resistant



min.1:1 5-40

1,000 to3,000

-5 60 CFIA

U-09FL™

Hysol®

2946029461**29462**29370**29371**


Plastic bonder,highly flexible,

high peel

UltraClear


10min.

1:1 5-30‡ 500 to2,000

-20 45 N/A

U-09LV™

Hysol®385883858938590**38591**

50 ml dual cartridge200 ml dual cartridge45 gallon pail, resin5 gallon pail, hardener

Plastic bonder, highlyflexible, high peel,

low viscosity

UltraClear

Resin – 920 cPAHardener – 1,030 cPA

10min.

1:1 N/A500 to2,000

N/A 45 N/A

6C™

Hysol® 83211 EPK 4 oz. kitGeneral purpose,bonds and seals,

machinable, gap fillingGrey


25min.

2.5:1 N/A 1,750 98 80 CFIA

11C™

Hysol® 83186 EPK 4 oz. kitGeneral purpose,bonds and seals,

machinableBlack


25min.

2.5:1 N/A 1,750 98 80 CFIA

907™

Hysol® 83098 EPK 2.2 oz. kitGeneral purpose,minimal surface

preparation

LightBlue


20min.

1:1 N/A 3,100 N/A 79 CFIA

9412™

Hysol®

8310883107

2 lb. kit10 lb. kit

Potting††, highstrength, self-leveling

PinkResin – 15,000 cPAHardener – 40 cPA

60min.

3.5:1 35† 4,000 N/A 75 N/A

FAST

SET

TIN

G

* Tested on aluminum lap shears.** Made-to-order item.+ Formerly Dexter® Hysol® 609.

† ASTM D3167.EPK = Epoxi-Patch® Kit.‡ Varies with substrates

†† For additional Potting andEncapsulating products, please seepages 76-81.


27

BO

ND

ING

Structural E

po

xy &U

rethane Ad

hesives

HIG

H T

EMPE

RAT

URE

/CH

EMIC

AL

RES

ISTA

NCE

Loctite® Hysol® Epoxy & Urethane AdhesivesProperties Chart


PackageType & Size FE

ATUR

ES

COLO

R

VISC

OSIT

Y AT

25°

C

WOR

KLIF

E

MIX

RAT

IO B

Y VO

LUM

E(R

ESIN

:HAR

DENE

R)

OVER

LAP

SHEA

RST

RENG

TH*

(PSI

)

AGEN

CYAP

PROV

ALS

Tg °

C

HARD

NESS

(SHO

RE D

)

PEEL

STR

ENGT

H (P

IW)

1C™

Hysol®83200832028320183206**83183**

EPK 4 oz. kit4 lb. kit17 lb. kit60 lb. pail, resin43 lb. pail, hardener

HIgh temperature,gap filling

WhiteResin – 235,000 cPA


min.2.5:1 N/A 1,750 98 80 CFIA

1C-LV ™

Hysol® 8320883207


High temperature,gap filling, impact resistant,

low viscosity

LightTan


20min.

2:1 N/A 2,100 N/A 75 N/A

E-20NS™

Hysol®293342933529336


Metal bonder, non-sag,high peel, high shear

LightTan


20min. 2:1 5-30

2,000 to 4,000

87 90 CFIA

E-214HP™

Hysol® 2933929340

30 ml cartridge300 ml cartridge

High strength,temperature resistant,

non-sagGrey 150,000 cPA

Heatcure

1 part 30-703,000 to

6,000120 85 N/A

9340™

Hysol®8310483105

EPK 2.7 oz. kit5 lb. kit

High temperature resistance,high chemical resistance

GreenResin – paste

Hardener – paste90

min.1:1 N/A 2,300 N/A 80 CFIA

9432NA™

Hysol® 83217**83216

2 lb. can55 lb. pail

Non-sag,surface insensitive,high temperature

Grey 225,000 cPA N/A 1 part 8 3,800 N/A 90 N/A

9437™

Hysol® 8365383668**


Transparent, high temperatureand chemical resistance,

machinable, sandableGrey


50 min.

1:1 5 3,000 N/A 50 N/A

9459™

Hysol® 83126 10 lb. canHigh temperature resistance,

self-leveling,high chemical resistance

White 39,000 cPA6

min.1 part N/A 3,000 N/A N/A N/A

9739™

Hysol®83149**83150**

42 lb. pail, hardener3x56 lb. pail, resin

High temperature resistance,high chemical resistance

BlackResin – 1,400,000 cPA

Hardener – 2,250,000 cPA90

min.3.3:1 N/A 2,500 N/A N/A N/A

* Tested on aluminum lap shears.** Made-to-order item.EPK = Epoxi-Patch® Kit.


Loctite® Hysol® Structural Epoxies & UrethanesProperties Chart

28

BO

ND

ING

Str

uctu

ral E

po

xy &

Ure

than

e A

dhe

sive

s

E-20HP™

Hysol®2931429315293162931729318


High strength,rubber toughened,

high peel, high shear,fast setting

Off White


20min.

2:1 20-703,000 to

5,00060 80 CFIA

E-60HP™

Hysol®

29319293202932129322**29323**


High strength,toughened,

high peel, high shear

OffWhite


60min.

2:1 20-703,000 to

5,00070 80 CFIA

E-120HP™

Hysol®

29353293542935529356**29357**


Ultra strength,non-sag,

aerospace gradeAmber


120min.

2:1 20-503,000 to

6,00090 85 CFIA

U-05FL™

Hysol®

2934829349293502935129352


Metal bonder,highly flexible,high strength

OffWhite

Resin – 640 cPAHardener – 35,000 cPA

5 min.

1:2 5-30 ‡1,000 to

3,00048 45 CFIA

3981™

Hysol®

3676637297

30 ml cartridge1 liter bottle

Fluorescent,environmental resistance

TransparentYellow

5,300 cPA30 min.

at 125°C1 part N/A 2,000 56 70

ISO-10993

3982™

Hysol®

3676737298



OffWhite

8,000 cPA30 min.

at 125°C1 part N/A 2,000 89 75

ISO-10993

3984™

Hysol®

3676837299*



LightGrey

25,500 cPA30 min.

at 125°C1 part N/A 2,000 74 75

ISO-10993

3985™

Hysol®

4087034731**

1 liter bottle5 gallon pail

Non-sag,armature bonding

Black 47,500 cPA10 min.

at 121°C1 part N/A N/A N/A N/A N/A

9430™

Hysol®

8311483113

2 lb. kit10 lb. kit

High strength,high peel

Off White

Resin – 300,000 cPAHardener – 40 cPA

40min.

4:1 60† 4,700 N/A 75 N/A

9433™

Hysol® 83119 50 ml dual cartridgeSelf-leveling,

high strength, high peelCream


30min.

2:1 45† 3,800 N/A 75 N/A

9460™

Hysol®

831298312883127**83131831308313383134

50 ml cartridge200 ml cartridge400 ml cartridge5 lb. kit20 lb. kit50 lb. pail, hardener50 lb. pail, resin

High peel,impact resistant,

high viscosity, non-sagGrey


40min.

1:1 35† 3,200 N/A 80 N/A

9460F ™

Hysol®8322583224**8322683227

50 ml dual cartridge200 ml dual cartridge50 lb. pail, resin50 lb. pail, hardener

Impact resistant,high shear, high peel



min.1:1 40† 3,800 N/A 80 N/A

9460PB™

Hysol®832338323283230**83231**

5 lb. kit20 lb. kit50 lb. pail, resin50 lb. pail, hardener

Bonds printing blanketstock, high strength


Hardener – 100,000 cPA100min.

1:1 N/A 2,000 N/A N/A N/A

9462™

Hysol®

8314283135**


Impact resistant,toughened, non-sag

BeigeResin – 82,500 cPA


min.1:1 20† 3,500 N/A 77 N/A

HIG

H T

OUG

HN

ESS


Package Type & Size FE

ATUR

ES

COLO

R

VISC

OSIT

Y AT

25°

C

WOR

KLIF

E

MIX

RAT

IO B

Y VO

LUM

E(R

ESIN

:HAR

DENE

R)

OVER

LAP

SHEA

RST

RENG

TH*

(PSI

)

AGEN

CYAP

PROV

ALS

Tg °

C

HARD

NESS

(SHO

RE D

)

PEEL

STR

ENGT

H (P

IW)

Indicates TOP CHOICE products.* Tested on aluminum lap shears.** Made-to-order item.+ Formerly Dexter® Hysol® 609.

† ASTM D3167.EPK = Epoxi-Patch® Kit.

†† For additional Potting andEncapsulating products,please see pages 76-81.

29

BO

ND

ING

Structural E

po

xy &U

rethane Ad

hesives

Substrate Selector Guide

Simply determine which substrates you’re bonding and find the adhesive recommendations in thetable below. Refer to the previous charts for typical performance properties of the recommendedadhesive. These recommendations should be used as a starting point only. It is recommended thatyou evaluate the selected product in your application to determine suitability.

Thermoplastics: ABS, PC, Acrylic, Nylon, SAN, PVC Thermoset Plastics: Epoxy, Phenolic, Polyester, DAP Rubber: Butyl, Neoprene, Nitrile, SBR, Natural, EPDM

Loctite® Hysol® Epoxy & Urethane Adhesives Bond to a Variety of Substrates

MetalsThermo-plastics

ThermosetPlastics

Rubber Glass Ceramic Masonry Wood LeatherPaper/

Hardboard

MetalsE-20NS™

E-214HP™

U-05FL™

U-05FL™

E-40FL™

E-20HP™

9430™

E-20NS™

E-20HP™

E-120HP™

608™

U-05FL™

E-40FL™

U-09LV™

9460™

E-30CL™

E-20NS™

U-05FL™

0151™

E-20HP™

E-30CL™

E-20NS™

9430™

E-20HP™

E-120HP™

E-20NS™

9432NA™

E-00NS™

E-20HP™

E-40FL™

608™

U-05FL™

E-40FL™

U-09LV™

9460™

E-05CL™

E-440FL™

E-00CL™

D609™

Thermo-plastics

U-05FL™

E-40FL™

E-20HP™

615™

U-05FL™

U-09LV™

E-40FL™

615™

U-05FL™

U-09LV™

E-40FL™

615™

U-05FL™

E-40FL™

U-09LV™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

E-40FL™

E-05CL™

E-20HP™

615™

E-05CL™

E-40FL™

E-20HP™

11C™

U-05FL™

U-09LV™

E-40FL™

9460™

E-05CL™

E-40FL™

E-20HP™

9433™

ThermosetPlastics

E-20HP™

E-20NS™

E-120HP™

615™

U-05FL™

U-09LV™

E-40FL™

615™

E-20HP™

E-120HP™

E-214HP™615™

U-05FL™

E-20HP™

E-40FL™

9460™

E-30CL™

U-05FL™

E-00CL™

0151™

E-30CL™

E-20HP™

E-40FL™

9433™

E-20HP™

E-120HP™

E-00CL™

9432NA™

E-20HP™

E-40FL™

E-00NS™

11C™

E-05CL™

U-09LV™

E-40FL™

615™

E-40FL™

E-00CL™

U-05FL™

D609™

RubberU-05FL™

E-40FL™

U-09LV™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

U-05FL™

E-40FL™

E-20HP™

9433™

E-40FL™

E-90FL™

U-05FL™

9460™

U-05FL™

E-40FL™

U-09LV™

9460™

U-05FL™

E-40FL™

U-09LV™

9460™

E-40FL™

E-90FL™

E-05CL™

9460™

E-40FL™

E-05CL™

E-20HP™

9433™

U-05FL™

U-09LV™

E-40FL™

9460™

E-40FL™

E-05CL™

U-09LV™

9460™

GlassE-20NS™

E-30CL™

U-05FL™

0151™

U-05FL™

U-09LV™

E-40FL™

9460™

E-00CL™

E-30CL™

U-05FL™

D609™

E-05CL™

U-05FL™

U-09LV™

9460™

E-30CL™

E-00CL™

U-09LV™

D609™

E-30CL™

E-20NS™

U-05FL™

0151™

E-30CL™

E-00NS™

E-20HP™

0151™

E-30CL™

E-40FL™

E-00CL™

D609™

E-40FL™

E-05CL™

U-09LV™

615™

E-05CL™

E-40FL™

E-30CL™

9460™

CeramicE-20NS™

E-30CL™

E-20HP™

9430™

U-05FL™

U-09LV™

E-40FL™

9460™

E-40FL™

E-20HP™

E-30CL™

9433™

U-05FL™

U-09FL™

E-40FL™

9460™

E-30CL™

E-00CL™

U-09LV™

D609™

E-20HP™

E-30CL™

E-120HP™

9433™

E-00NS™

E-20HP™

E-20NS™

608™

E-20HP™

E-40FL™

E-00NS™

608™

E-40FL™

E-05CL™

U-09LV™

9460™

E-40FL™

E-05CL™

E-00CL™

D609™

MasonryE-20NS™

E-20HP™

E-120HP™

9433™

E-40FL™

E-20HP™

E-05CL™

9433™

E-20HP™

E-120HP™

E-00CL™

D609™

E-40FL™

E-90FL™

E-05CL™

615™

E-30CL™

E-00NS™

E-20HP™

0151™

E-00NS™

E-20HP™

E-20NS™

9433™

E-20HP™

E-00NS™

E-120HP™

608™

E-20HP™

E-00NS™

E-40FL™

9433™

E-05CL™

E-40FL™

U-05FL™

9460™

E-05CL™

E-00CL™

E-20HP™

D609™

WoodE-20HP™

E-40FL™

E-00NS™

9433™

E-40FL™

E-05CL™

E-20HP™

11C™

E-20HP™

E-40FL™

E-00NS™

11C™

E-40FL™

E-05CL™

E-20HP™

9433™

E-30CL™

E-40FL™

E-00CL™

0151™

E-20HP™

E-40FL™

E-00NS™

608™

E-20HP™

E-00NS™

E-40FL™

608™

E-00CL™

E-20HP™

E-40FL™

9433™

E-05CL™

E-40FL™

E-90FL™

615™

E-00CL™

E-40FL™

U-05FL™

D609™

LeatherE-40FL™

U-05FL™

U-09LV™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

E-05CL™

U-09LV™

E-40FL™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

E-40FL™

E-05CL™

U-09LV™

9460™

E-40FL™

E-05CL™

U-09LV™

960™

E-05CL™

E-40FL™

U-05FL™

615™

E-05CL™

E-40FL™

E-90FL™

9460™

U-05FL™

U-09LV™

E-40FL™

9460™

E-05CL™

E-40FL™

U-05FL™

9460™

Paper/Hardboard

E-40FL™

E-05CL™

E-00CL™

D609™

E-40FL™

E-05CL™

E-20HP™

9433™

E-40FL™

E-05FL™

U-05FL™

9460™

E-40FL™

E-05CL™

U-09LV™

9460™

E-05CL™

E-40FL™

E-30CL™

0151™

E-40FL™

E-05CL™

E-00CL™

D609™

E-05CL™

E-00CL™

E-20HP™

D609™

E-00CL™

E-20HP™

E-40FL™

9460™

E-05CL™

E-40FL™

U-05FL™

615™

E-05CL™

E-40FL™

E-00CL™

D609™

Coatings

30

PROTECTIVE COATINGS

Protective coatings serve many functions including:

• Protection• Sealing• Insulating• Corrosion protection

They can also be used to add gripping power or tocolor code equipment. Many of these products alsooffer protection from harsh chemicals like acids, salts and alkalis that are damaging to most industrial equipment.

What is the difference between a treatment and a coating?

A treatment, such as Loctite® Extend® Rust Treatmentis used to treat existing rust in an effort to correct a corrosion problem.

A coating is a product used for preventativemaintenance and should be used on a clean part or a treated part. If corrosion exists on a surface, a coating will not correct the problem, and thesubstrate will continue to corrode underneath theprotective coating. Using surface treatments andprotective coatings together is the most effectivesolution to surface protection.

WEAR-RESISTANT COATINGS

Asset Protection

Wear and corrosion are common causes for failure inindustrial equipment. Often times, this equipment isvery expensive and repairing and protecting these assetsoffers a significant cost savings. Loctite® Nordbak® wearresistant coatings offer superior wear protection for newand worn equipment in a variety of applications.Extending service life and increasing efficiency throughreduced friction are just two examples of the benefits ofusing protective coatings to protect your assets.

What is the proper surface preparation for wear-resistant coatings?

A properly prepared surface is one that has beencleaned, dried, and abraded. Substrates should be freefrom contamination including oils, grease, dust, etc. It is also important that a surface is dry before workingwith a wear resistant coating because moisture on thesurface can interfere with the curing process. The finalstep is to abrade the surface, which provides anincreased surface area for bonding. When working withmetals, the surface should be abraded to a near whitemetal finish, which also helps to ensure that all surfacecorrosion is removed.

Loctite® Adhesives and Sealants Product Specialists are available to assist you. For application assistance, call 1-800-LOCTITE(562- 8483) or visit www.loctite.com and select “Contact Loctite.” In Canada, please call 1-800-263-5043.

Selecto

r Guid

eC

OATIN

GS

31

What Type of Protection is Needed?

Corrosion

Rust Treatment PreventativeProtection

Non-Drying

Extreme Chemical Attack

SpecialtyCoatings

Chemical Resistant Coating

Color Coding

Loctite® Color Guard ® Coating

Belt Dressing

Loctite® Belt Dressing & Conditioner

Undercoating

Loctite® Extend ®

Coating

Cathodic Protection

Loctite® Heavy-DutyRubberized

Undercoating

Loctite ® ColdGalvanizing Compound

Loctite® Maxi-Coat ™

NOTE: Please refer to pages 34-35 for more information on these products.

Coatings Selector Guide

Sel

ecto

r G

uid

eC

OATIN

GS

Wear-Resistant CoatingsSelector Guide

32

✓ Provide superior protection from environmental impact

✓ Eliminate and break corrosion/erosion cycle

✓ Non-shrink and non-sag formulations

✓ High compression strength

✓ Broad chemical resistance

✓ Broad range tailored to specific applications

Fine Particle Wear to

250°F (121°C)


450°F (232°C)

Fast Curing, FineParticle Wear to 225°F (107°C)

Non-Rust Puttywith Fine ParticleWear Resistance

Large Particle Wear to

250°F (121°C)


550°F (288°C)

Fast Curing,Large Particle

Wear to 225°F (107°C)

CombinedResistance for

Large andFine Particle

Wear to 250°F (121°C)

Low Odor,Large Particle

Wear to 250°F (121°C)


450°F (232°C)

Coarse/Large Particle Abrasion

Sliding Abrasion

Coarse Particle, Fine Particle or Turbulence?


550°F (288°C)

Fine Particle Abrasion

ADDITIONAL OFFERINGSLet Henkel help you select the proper coating for your application.

Refer to Loctite® Wear Resistant Coatings Technical Catalog and Brochure by visiting www.loctite.com.

Click on Product & Service Solutions and then selectLiterature to view the guides or request copies.

Loctite®

Nordbak®

Pneu-Wear

Loctite®

Nordbak®

Ultra HighTemperaturePneu-Wear

Loctite®

Nordbak® HighTemperaturePneu-Wear

Loctite®

Nordbak®

Fast Cure Pneu-Wear

Loctite®

Fixmaster®

WearResistant

Putty

Loctite®

Nordbak®

Low OdorWearing

Compound

Loctite®

Nordbak®

WearingCompound

Loctite®

Nordbak®

Ultra HighTemperature

WearingCompound

Loctite®

Nordbak® FastCure Wearing

Compound

Loctite®

Nordbak®

Combo BeadWearing

Compound

Loctite®

Nordbak® HighTemperature

WearingCompound


Selecto

r Guid

eC

OATIN

GS

33

Extreme Corrosion/Erosion

Liquid/Slurry Turbulence

Thin Mil,Low Friction,Turbulence

Resistance to200°F (93°C)

Low Friction,Turbulence


Low Friction,Turbulence


Wear/Abrasion

Are you experiencing mechanical wear/abrasion or corrosion/erosion?

Impact Specialty

Loctite® Nordbak®

Chemical Resistant Coating

Sliding Abrasion or Impact Resistance?

Loctite®

Nordbak®

BrushableCeramic –Thin Mil

Loctite®

Nordbak®

BrushableCeramic

Loctite®

Nordbak®

HighTemperature

BrushableCeramic

Loctite®

Nordbak®

High ImpactWearing

Compound

Loctite®

Nordbak®

Ceramic TileAdhesive

Loctite®

Nordbak®

CastableWearing

Compound

Loctite®

Fixmaster®

Flex 80 ™

Putty

NOTE: Please refer to pages 36-39 formore information on these products.

34

CO

ATIN

GS

Protective CoatingsP

rote

ctiv

e C

oat

ing

s

LIQUID RUBBER COATINGS

LOCTITE® COLOR GUARD® COATINGInhibits rust and corrosion. Seals, insulates, and identifies.A solvent-based, modified thermoplastic liquid coating that driesto a durable, flexible, rubber - likeprotective coating on parts andequipment. Dip, spray or brush toapply. Great for tools, metals, electricalconnections, masonry, wood,conveyors, glass, rope, and fabric. Meets ASTM E-96 moisture resistance, ASTMB-117 salt spray testing, ASTMG - 53- 84accelerated 10 year weather test, and CFIA.

ASSISTANCE PRODUCTS

LOCTITE® COLOR GUARD® PRIMERPromotes adhesion on metals; highlyrecommended for use when coatingmetal hand tools. Allow the primer to dry for 10 to 15 minutes beforecoating with Loctite® Color Guard®Coatings. Use with pressure pot orairless spray systems.

LOCTITE® COLOR GUARD® THINNERThinner is required for use whenspraying any of the Loctite® ColorGuard® Coatings. Helps reduce anyclogging and is recommended foruse with pressure pot or airless spray systems. See technical datasheets on www.loctite.com for otherhelpful suggestions. This productcan also be used to remove curedLoctite® Color Guard® Coating.

RUST TREATMENT

LOCTITE® EXTEND® RUST TREATMENTConverts existing rust (rust required)into a stable base. Cured product actsas a primer ready for painting withoil - or solvent -based paint. Protectssurface from corrosion. Use on metal pipes, valves, fittings, outsidesurfaces of storage tanks, fences,guard rails, wrought iron furniture,conveyors, construction andagricultural equipment.

SPECIALTY COATINGS

LOCTITE® HEAVY-DUTYRUBBERIZED UNDERCOATINGThis heavy-duty undercoating seals,protects, and insulates. Rubberized formaximum durability.

LOCTITE® MAXI-COAT™

Heavy- duty coating provides long- term protection for metal parts,equipment, and machinery. Forms aprotective, waxy film which seals outmoisture, air, acid, and other corrosiveelements. Great for protecting parts instorage. Removable with Loctite®Electrical Contact Cleaner.

LOCTITE® COLD GALVANIZING COMPOUNDSprays on metal surfaces to preventcorrosion even when the surface isscratched. Ideal touch-up for weldedseams. Highly resistant to saltcorrosion and water. Not resistant toacid or alkaline solutions. Contains noozone-depleting compounds.

LOCTITE® BELT DRESSING & CONDITIONERRecommended to prevent slippingand increase friction for all types ofbelts. Extends belt life. Penetrates thecord fibers of “V” belts to restorepliability and flexibility. Eliminatessqueaking and glazing.

LOCTITE® NORDBAK®

CHEMICAL RESISTANT COATINGSmooth, glossy, low friction finish protects against turbulence,abrasion, and cavitation. Thisadvanced epoxy protects equipmentfrom extreme chemical attack andcorrosion. Low viscosity epoxy can be applied by brush.

Henkel offers a variety of Loctite® coatings to protect, seal, insulate,prevent corrosion, color code and add gripping power. Many productsprovide excellent resistance to acids, alkalis, salt, and moisture thatcan damage equipment.

35

CO

ATIN

GS

Pro

tective Co

atings

ASS

ISTA

NCE

PRO

DUC

TSLI

QUI

D R

UBB

ER C

OATI

NG

S

Loctite® Protective Coatings Properties Chart

RUST

TREA

TMEN

TSP

ECIA

LTY

COAT

ING

S


Package Type & SizeCO

LOR/

APPE

ARAN

CE

TEM

PERA

TURE

DRY

TIM

E

FULL

CUR

E

COVE

RAGE

APPL

ICAT

ION

MET

HOD

AGEN

CYAP

PROV

ALS

Color Guard®

Coating

34894349793498034981*

11 oz. net wt. aerosol can14.5 fl. oz. can1 gallon can54 gallon drum

Black

up to 200°F (93°C)

4 hours (allow 30minutes

between coats)

24 hours atambient

temperature

180 sq. ft.per gallon at

2.5 milsthickness

Dip,brush or

spray

CFIA, ASTM E-96, ASTM

B-117,ASTM G-53-84

Color Guard®

Coating

34895349823498334984*


Blue

Color Guard®

Coating

34896349853498634987*


Red

Color Guard®

Coating

34897349883498934991*


Yellow

Color Guard®

Primer(Promotes adhesionon metals)

34994 1 gallon can Grey N/A10 to 15 minutes

10 to 15 minutes before

dipping orcoating

150 to 200 sq.ft. per gallon at

0.5 to 1 milthickness

Brush orspray

N/A

Color Guard®

Thinner34995 1 gallon can

Clear Solvent

N/AMixed incoating

N/A

Brushing:1 part thinner

to 2 parts coating

Brush orspray

N/A

Extend® RustTreatment

30539 10.25 oz. net wt. aerosol Clear Liquidup to 250°F

(121°C)Recoat in

2 to 3 minutes 24 hours atambient

temperature

200 sq. ft.per gallon at

2.5 milsthickness

Aerosol spray

ABS,CFIA75430

7544875465

1 quart bottle1 gallon bottle5 gallon pail

Converts from a White Liquid to Matte Black

up to 250°F (121°C)

Recoat in 20minutes

Brush orcommercial

sprayer

Heavy-DutyRubberizedUndercoating

30538 16 oz. net wt. aerosolBrown to

Blackup to 200°F

(93°C)20 minutes

24 hours atambient

temperature

Recommended2 coats

Aerosol spray

N/A

Maxi-Coat™ 5121151213

12 oz. net wt. aerosol1 gallon can

Brownup to 200°F

(93°C)Non-drying Waxy coat

Apply heavy coat with brush

Brush on CFIA

Cold GalvanizingCompound

82039 15 oz. net wt. aerosolLow Gloss

Grey

up to 400°Fconstant;

600°Fintermittent

15 minutes to touch

24 hours atambient

temperature

Apply heavy coat at 12 to 15

inches away

Aerosol spray

CFIA

Belt Dressing &Conditioner

30527 12 oz. net wt. aerosol Whiteup to 200°F

(93°C)Penetrates belt

Increases frictionright away

Spray lightcoating

Aerosol spray

CFIA

Nordbak®

ChemicalResistant Coating

96092 12 lb. kit Greyup to 150°F

(65°C)16 hours 16 hours

74 sq. ft. at 20 ml thickness

Roll or brush on

CFIA

* Made-to-order item. May require 6 week lead time.

� When coating any surface, make sure theparts are clean and dry. Try doing a smalltest piece first to confirm that the coatingmeets your expectations. This will save you time and money if desired results are not achieved.� Loctite® Color Guard® Thinner can be used toremove cured Loctite® Color Guard® Coating.� Loctite® Color Guard® Coating colors can bemixed to make different colors.

COARSE/LARGE PARTICLE ABRASIONLOCTITE® NORDBAK®

WEARING COMPOUNDLarge ceramic beads and fine silicon carbide in a highperformance epoxy system protectagainst sliding abrasion to 250°F.Non-sagging. Trowelable.

LOCTITE® NORDBAK® HIGH TEMPERATUREWEARING COMPOUNDResists sliding abrasion andtemperatures to 450°F. Must be post-cured for maximumtemperature resistance andperformance. Trowelable.

LOCTITE® NORDBAK® ULTRA HIGHTEMPERATURE WEARING COMPOUNDResists sliding abrasion andtemperatures to 550°F. Must be post-cured for maximumtemperature resistance andperformance. Trowelable.

LOCTITE® NORDBAK®

FAST CURE WEARING COMPOUNDA faster curing version of Loctite®Nordbak® Wearing Compound, thisepoxy renews worn surfaces fast,reducing downtime to put equipmentback in service in as little as threehours. Trowelable.

LOCTITE® NORDBAK®

COMBO BEAD WEARING COMPOUNDThis epoxy system combines theabrasion resistance qualities of bothlarge and small ceramic beads andsilicon carbide. Protects against hard sliding abrasion and extends the life of material handling equipment. Trowelable.

COARSE/LARGE PARTICLE ABRASIONLOCTITE® NORDBAK®

LOW ODOR WEARING COMPOUNDLoctite® Nordbak® Low Odor WearingCompound offers the same protectionagainst coarse/large particle abrasion asLoctite® Nordbak® Wearing Compound,while offering a low odor formulation.This coating is particularly suited forapplications in areas where ventilationmay be limited.

FINE PARTICLE ABRASIONLOCTITE® NORDBAK® PNEU-WEARFilled with small ceramic beads andsilicon carbide for maximumprotection against fine particleabrasion to 250°F. Trowelable.

LOCTITE® NORDBAK®

HIGH TEMPERATURE PNEU-WEARProtects against fine particle abrasionand temperatures to 450°F. Must bepost-cured for maximum temperatureresistance and performance. Trowelable.

LOCTITE® NORDBAK®

ULTRA HIGH TEMPERATURE PNEU-WEARProtects against fine particle abrasionand temperatures to 550°F. Must bepost-cured for maximum temperatureresistance and performance. Trowelable.

LOCTITE® NORDBAK® FAST CURE PNEU-WEARFast cure version of standard Loctite®Nordbak® Pneu- Wear protects againstfine particle abrasion to 225°F andcures in just 3 hours. Trowelable.

LOCTITE® FIXMASTER® WEAR RESISTANT PUTTYCeramic fibers give this trowelable puttyexcellent wear and abrasion resistanceproperties. Cures to a smooth, lowfriction surface. For surfaces exposed to wear, erosion, and cavitation.

36

CO

ATIN

GS

Wea

r-R

esis

tant

Co

atin

gs

Wear-Resistant Coatings

NEW

Loctite® Nordbak® wear-resistant coatings utilize the superior wear properties of ceramic and the convenienceof two-part epoxies to protect equipment like pumps, chutes, and augers in harsh industrial environments.Available in trowelable and brushable formulations with special fillers for tough conditions, Loctite® Nordbak®products stand up to almost any corrosion, abrasion and wear problem you can encounter, and are ideal for allthose large -scale repairs that have to last.

LIQUID/ SLURRY TURBULENCE

LOCTITE® NORDBAK® BRUSHABLECERAMIC AND THIN MILBRUSHABLE CERAMICBrushes on to form a smooth,corrosion-resistant coating.Protects against turbulence,abrasion, and cavitation. Can also be used as a top coat overLoctite® Nordbak® WearingCompound for surface rebuildingand lasting protection. Resists temperatures up to 200°F.

LOCTITE® NORDBAK®

HIGH TEMPERATURE BRUSHABLE CERAMICProvides protection againstturbulence, abrasion and cavitationup to 550°F. Must be post-cured formaximum temperature resistance and performance.

IMPACT WEAR RESISTANCE

LOCTITE® NORDBAK®

HIGH IMPACT WEARING COMPOUNDRubber-modified epoxy protectsagainst sliding abrasion and impact to 250°F. Trowelable.

LOCTITE® FIXMASTER® FLEX 80™ PUTTYA trowelable, two-part urethane for rebuilding and repairing rubberparts and linings, providingimpact, abrasion and corrosion-resistant protection.

SPECIALTY WEAR RESISTANCE

LOCTITE® NORDBAK®

CASTABLE WEARING COMPOUNDFor casting wear-resistant parts.Pourable ceramic compound can be cast into any shape. Resists temperatures to 225°F.

LOCTITE® NORDBAK®

CERAMIC TILE ADHESIVEHigh strength. For securing ceramicwear tiles to vertical, horizontal andoverhead surfaces. Excellent shockand impact resistance. Trowelable.Resists temperatures to 200°F.

37

CO

ATIN

GS

Wear-R

esistantC

oating

s

NEW

� You may smooth out any compositerepair product using IPA or acetoneand a gloved hand.

� When applying two coats of Loctite®

Nordbak® Brushable Ceramic,a different color can be used for each:grey and white. When the first coatbegins to wear, the second color coatwill show through, providing anaccurate visual indicator of wear.

38

CO

ATIN

GS

Wea

r-R

esis

tant

Co

atin

gs

LIQ

UID

/SLU

RRY

TUR

BUL

ENCE

SPEC

IALT

YW

EAR

RES

ISTA

NCE

IMPA

CT W

EAR

RESI

STAN

CECO

AR

SE/

LAR

GE

PART

ICLE

AB

RA

SIO

NFI

NE

PART

ICLE

AB

RA

SIO

N

Properties based on mixing 1 lb. mass at 77°F,ultimate cure.

* 20 mil thickness.� Requires heat cure. See Technical Data Sheet.

** in.2 at 1/4" thickness‡ Shore A


PackageType & Size

Loctite® Wear-Resistant CoatingsProperties Chart

COM

PRES

SIVE

STRE

NGTH

(PSI

)

WOR

KING

TIM

E(M

INUT

ES) 7

7°F

HARD

NESS

(SHO

RE D

)

FUNC

TION

AL C

URE

(HOU

RS) 7

7°F

MIX

RAT

IO

BY V

OLUM

E (R

:H)

MIX

RAT

IO

BY W

EIGH

T (R

:H)

AGEN

CYAP

PROV

ALS

COLO

R

MAX

IMUM

OPE

RATI

NGTE

MPE

RATU

RE (°

F)

COVE

RAGE

(FT.

2@

1/4

"TH

ICKN

ESS)

Nordbak® Wearing Compound 9981399812

5 lb. kit25 lb. kit

1.758.75

Grey 250 16,000 90 30 7 2:1 2:1 NEHC, NAVSEA

Nordbak® High TemperatureWearing Compound

99112 25 lb. kit 9 Grey 450 15,000 85 30 � 4:1 3.9:1 N/A

Nordbak® Ultra High Temperature Wearing Compound

96392 25 lb. kit 9 Red 550 N/A 90 30 � 2.44:1 2.85:1 N/A

Nordbak® Fast CureWearing Compound

96373 6 lb. kit 2.1 Blue 225 10,000 90 10 3 2:1 2:1 N/A

Nordbak® Combo BeadWearing Compound

96303 6 lb. kit 2.3 Grey 250 13,000 90 25 8 2:1 2:1 N/A

Nordbak® Low Odor Wearing Compound

41343 25 lb. kit 8.75 Grey 250 16,000 90 30 7 2:1 2:1 N/A

Nordbak® Pneu-Wear 9838398382

3 lb. kit25 lb. kit

1.19

Grey 250 15,000 90 30 6 4:1 4:1ABS, CFIA,

NEHC, NAVSEA,Lloyd’s

Nordbak® High Temperature Pneu-Wear

98372 25 lb. kit 8.8 Grey 450 15,000 90 30 � 4:1 4:1 N/A

Nordbak® Ultra High Temperature Pneu-Wear

96332 25 lb. kit 8.8 Red 550 N/A 90 30 � 2:1 2.27:1 N/A

Nordbak® Fast Cure Pneu-Wear 96363 6 lb. kit 2.1 Blue 225 12,000 90 10 3 2:1 2:1 CFIA

Fixmaster® Wear Resistant Putty 9874298743

1 lb. kit3 lb. kit

0.371.11

Grey 225 11,600 89 30 � 2:1 2:1 N/A

Nordbak® Brushable Ceramic – Grey

9873398732

2 lb. kit6 lb. kit

12*36*

Grey 200 12,500 85 30 6 2.75:1 4.8:1 ABS, CFIA

Nordbak® Brushable Ceramic – White

96443 2 lb. kit 12* White 200 12,500 85 15 5 2.8:1 4.5:1 CFIA

Nordbak® Brushable Ceramic – Grey (Thin Mil)

40592 2 lb. kit 12* Grey 200 12,500 85 30 6 2.75:1 4.8:1 N/A

Nordbak® Brushable Ceramic – Blue (Thin Mil)

40591 2 lb. kit 12* Blue 200 12,500 85 30 6 2.75:1 4.2:1 N/A

Nordbak® Brushable Ceramic – Black (Thin Mil)

40590 2 lb. kit 12* Black 200 12,500 85 30 6 2.75:1 4.8:1 N/A

Nordbak® High TemperatureBrushable Ceramic

96433 2 lb. kit 12* Red 550 16,000 90 120 � 2.6:1 4.25:1 N/A

Nordbak® High Impact Wearing Compound

39918 25 lb. kit 8.75 Grey 250 15,000 85 30 6 2:1 2:1 N/A

Fixmaster® Flex 80™ Putty 9742397422

1 lb. kit6 lb. kit

94**560**

Black 180 N/A 87 ‡ 10 8 100:40 72:28 ABS

Nordbak® CastableWearing Compound

98992 25 lb. kit 277 in.3 Grey 225 18,500 90 30 6 2:1 6.8:1 N/A

Nordbak® Ceramic Tile Adhesive 97762 20 lb. kit 12 Beige 200 14,000 88 60 12 1:1 3.7:1 N/A

NEW

NEW

NEW

NEW

NEW

NEW


CO

ATIN

GS

39

Wear-R

esistantC

oating

s

P R O D U C T

CORR

OSIO

NPR

OTEC

TION

PUM

P RE

PAIR

TILE

INST

ALLA

TION

ELBO

WS

FAN

HOUS

INGS

CYCL

ONES

CHUT

ES

HIGH

TEM

PERA

TURE

RESI

STAN

CE

FAST

CUR

E

CHEM

ICAL

CORR

OSIO

NPR

OTEC

TION

MUL

TIPL

E PA

RTIC

LEAB

RASI

ON

IMPA

CTRE

SIST

ANCE

FINE

PAR

TICL

EAB

RASI

ON

� Preferred Choice � Good Choice

LIQ

UID

/SLU

RRY

TUR

BUL

ENCE

SPEC

IALT

YW

EAR

RES

ISTA

NCE

IMPA

CT W

EAR

RESI

STAN

CECO

AR

SE/

LAR

GE

PART

ICLE

AB

RA

SIO

NFI

NE

PART

ICLE

AB

RA

SIO

N

Nordbak® Wearing Compound � � � � �Nordbak® High TemperatureWearing Compound � � � � � �Nordbak® Ultra High Temperature Wearing Compound � � � � � �Nordbak® Fast CureWearing Compound � � � � � �Nordbak® Combo BeadWearing Compound � � � � � �Nordbak® Low Odor Wearing Compound � �

Nordbak® Pneu-Wear � � � � � � �Nordbak® High Temperature Pneu-Wear � � � � � � � �Nordbak® Ultra High Temperature Pneu-Wear � � � � � � � �Nordbak® Fast Cure Pneu-Wear � � � � � � � �Fixmaster® Wear Resistant Putty � � � � �Nordbak® Brushable Ceramic – Grey � � �Nordbak® Brushable Ceramic – White � � �Nordbak® Brushable Ceramic – Grey (Thin Mil) � � �Nordbak® Brushable Ceramic – Blue (Thin Mil) � � �Nordbak® Brushable Ceramic – Black (Thin Mil) � � �Nordbak® High TemperatureBrushable Ceramic � � � �Nordbak® High Impact Wearing Compound �Fixmaster® Flex 80™ Putty �

Nordbak® Castable Wearing Compound � �Nordbak® Ceramic Tile Adhesive � �

Loctite® Wear-Resistant CoatingsApplication Chart

NEW

NEW

NEW

NEW

NEW

NEW


40

FLOORING, CONCRETE REPAIR AND GROUTING

Industrial floors require maintenance approximatelyevery six months. Damage from day- to -day traffic,heavy load and chemical erosion can lead to a floorthat needs a lot of work. Loctite® flooring and groutingproducts can address all of your floor repair needs andhelp you maintain a safe, efficient workplace.

When choosing a floor or concrete repair product, theimportant things to consider are substrate condition,traffic and chemical exposure, and time available tocomplete the repair. Information and charts on thefollowing pages will help you choose a product that will provide superior protection against the harshestenvironments or get your floor back in service in under an hour!

How important is surface preparation?

A floor repair is only as good as the concrete orsubstrate to which it is adhering. It is important tothoroughly check for damaged or loose concretebecause a failure of the substrate below the repairwould eventually degrade the integrity of the repairitself. Surface preparation is the most important aspectof any concrete or floor repair.


ANTI-SLIP COATINGS

Choosing an anti-slip coating

When choosing an anti - slip coating, there are severalfactors to consider. The most important of which isprofile size. A more aggressive profile will providebetter traction and a higher coefficient of friction. A lower profile will provide a better walking surfaceand will be easier to clean, in addition to the anti - slip properties.

It is also important to consider the substrate that isbeing coated and the type of exposure the coating willendure. Information and charts on the following pageswill help guide you through your selection process.

When do I need to use a primer?

It is always recommended that a primer be used beforeapplying an anti-slip coating. Primers increase adhesionto the substrate and also seal porosity when applied onconcrete. The decision on which primer to use is basedon the product being used and the substrate. Thefollowing chart will assist you in choosing the rightprimer for your application.

Flooring & Concrete Repair

Gasketing & Sealing

48

Gaskets are used to prevent fluid or gas leaks by forming impervious barriers. Forsuccessful gasketing, the seal must remain intact and leak-free over a prolongedperiod of time. Therefore, the gasket must resist the fluid and/or gaseous mediumbeing sealed or excluded, and withstand the operating temperatures and pressuresto which it is subjected.

There are three types of flange gaskets.

1. Conventional pre-cut compression gasketsare made from paper, rubber, cork, metal or other materials.

2. Formed-in-Place (FIP) gaskets are applied as a liquid sealant to one of the flange surfaces before the parts are assembled. After assembly, the FIP gasket spreads and cures between the flanges, filling gaps, scratches, and surface irregularities to provide a durable seal.

3. Cured-in-Place (CIP) gaskets, which are applied as a liquid by tracing machines in precise beads to one of the flanges and cured by ultraviolet (UV) light, form an elastomeric material with adhesion to the flange surface. Sealing is achieved through compression of the cured gasket during flange assembly.

What is the best gasket for my application?

Many factors influence gasket choice to achieve therequired sealing performance on a wide range offlanges. The following chart will work best whenselecting the right gasket type. This chart is intended to serve as a general guideline to help you determinewhich gasket type is best suited for your application.The data presented herein reflects typical properties for each gasket type; however, there may be exceptionsto the data presented. Individual product informationcan then be found on the following pages to helpnarrow your search.

This chart should not be used to specify products withoutspecific testing. It is recommended that you conduct on-parttesting to ensure product performance before specifying anygasketing product.


49

GA

SK

ETIN

G &

SE

ALIN

GS

elector G

uide

G E N E R A LC O M PA R I S O N

GASKET TYPE

Conventional Gasket Dressings

Cured-In-PlaceSilicones

Formed-In-PlaceAnaerobics

Formed-In-PlaceModified Silanes

Formed-In-PlaceSilicones

BENEFITS Versatile, immediategreen strength (sticky)

High gap filling,reusable/serviceable gasket,

immediate fill properties

Improved structural strength,long open time, high

pressure seal

High gap filling, improvedstrength/adhesion over

silicones, paintable

High gap filling,resistant to dynamic fatigue,

on-line pressure testing

LIMITATIONS Non-curing, limited gapfill, % shrinkage

Requires process equipment Limited fillLimited temperature

performanceShort open time

P E R F O R M A N C EC O N S I D E R AT I O N S

GASKET TYPE







Continuous Operation -65°F to +400°F -60°F to +400°F -40°F to +300°F -40°F to +200°F -60°F to +400°F

Maximum +600°F +500°F +400°F +200°F +725°F

FLUID RESISTANCE

Oil Yes Yes Yes Limited Yes

Water/Glycol Yes Yes Yes Yes Yes

Fuel Limited No Limited Limited No

Transmission Fluid Yes Yes Yes Limited Yes

GAP FILL

Ideal 0.001" to 0.005" 0.020" to 0.125" 0.001" to 0.005" 0.001" to 0.125" 0.001" to 0.125"

Maximum 0.010" 0.240" 0.050" 0.240" 0.240"

INSTANT SEAL High Pressure High Pressure Low Pressure Low Pressure Low Pressure

FLANGE TYPE Rigid or Flexible Rigid or Flexible Rigid Rigid or Flexible Rigid or Flexible

SUITABLE FOR USE WITH:

Metals Yes Yes Yes Yes Yes

Plastics* Yes Yes No Yes Yes

P R O C E S SC O N S I D E R AT I O N S

GASKET TYPE






NUMBER OF COMPONENTS 1 1 1 1 1

CURE METHOD Not Applicable UV/RTV Anaerobic Moisture RTV

CURE TEMPERATURE Room Temperature Room Temperature Room Temperature Room Temperature Room Temperature

CURE SPEED

Initial Cure Immediate 15 to 30 seconds 15 to 30 minutes 15 to 30 minutes 15 to 30 minutes

Full Cure Not Applicable 30 seconds 24 to 72 hours 1 to 7 days 1 to 7 days

PROCESSING OPTIONS

Manual Yes No Yes Yes Yes

Automated No Yes Yes Yes Yes

For more information on each adhesive category refer topages…

51-53 56-59 50, 52-53 54-55 56, 58-59

* Uncured liquid adhesives may cause stress cracking of certain thermoplastics (e.g. polycarbons, acrylic, and polysulfone).Special products and process techniques are available. Consult the Loctite® Design Guide to Bonding Plastics (LT-2197) or call 1-800-LOCTITE for more information.

Gasketing & Sealing Selector Guide

GA

SK

ETIN

G &

SE

ALIN

GA

naer

ob

ics

50

RIGID ASSEMBLY FLANGE SEALANTSLOCTITE® 504™ GASKET ELIMINATOR®

FLANGE SEALANTGap FillingA single-component, instant, lowpressure flange sealant that fills gaps to 0.050".

LOCTITE® 509™ GASKET ELIMINATOR®

FLANGE SEALANTFlexibleProduct withstands minor flangemovements caused by vibrations. It will not run when applied tovertical surfaces. Fluorescent blueproperties allow visual inspectionduring assembly.


FLANGE SEALANTHigh TemperatureProduct withstands temperatures to400°F and has excellent solvent andchemical resistance. Fills gaps up to0.010" (0.254 mm) and maintainsclamping loads for strong, leakproofassemblies. Makes or dresses gasketsin rigid assemblies. Eliminatesgasket compression set.

RIGID ASSEMBLY FLANGE SEALANTS

LOCTITE® 515™ GASKETELIMINATOR® FLANGE SEALANTMakes flexible gaskets for rigidmachined flanges with less than0.050" gap. Flexes when flangesmove in service.


FLANGE SEALANTForms a flexible, solvent-resistantseal that will not tear or decay. Sealsto 300°F and fills gaps to 0.050". Can be used on flexible metalassemblies, including aluminumsurfaces. Easy disassembly andcleaning. Ideal for on-the -spot andemergency repairs, or when aconventional gasket is out of stock.

LOCTITE® QUICKSTIX™

548™ GASKET ELIMINATOR®

FLANGE SEALANTPatented semi-solid formula is idealfor on-the-spot repairs or when aconventional gasket is out of stock.Can be applied quickly and neatly ona variety of metal surfaces, includingaluminum, and forms a flexible,solvent -resistant seal. Seals to 300°F(149°C) and fills gaps to 0.010".

Anaerobics

Anaerobic gasketing technology has revolutionized flange sealing in the automotiveindustry, the assembly of heavy equipment, and the manufacture of various types of fluidpower equipment. Loctite® anaerobic gasketing materials remain liquid when exposed toair, but cure when confined between mating flanges. Anaerobic gasketing products are bestsuited for small gap applications and rigid metal -to -metal assemblies.

INNOVATIVE TECHNOLOGIES

New semi -solid anaerobicgasketing QuickStix™ are available!

Visit www.quickstix.loctite.com formore details.

NEW

51

Anaero

bics

GA

SK

ETIN

G &

SE

ALIN

G

DISPENSING OPTIONS

Loctite® Pump-A-Bead™ II is an all-pneumatic dispense system for pumpingLoctite® anaerobic gasketing materials from 850 ml cartridges. Apneumatically -driven, reciprocating positive displacement piston pumpprovides for consistent dispensing and ensures that air is not introduced intothe product. This system is well suited for stationary or bead dispensing.

For available spare parts, valves and accessories, please visit www.equipment.loctite.com.

Item Number: 986000Dimensions - 16.2" H x 36" W x 10" D

SEALANTS /DRESSINGS FOREXISTING GASKETSLOCTITE® QUICKSTIX™ 534™

HI-TACK GASKET DRESSINGNo mess, semi-solid formula offersadded control and ease of use.Patented package is portable andwon’t leak or spill. Seals and holdsthe heaviest gaskets duringassembly. Solvent - free and low odor. Suitable to 300°F (149°C).

LOCTITE® GASKET SEALANT 1Reliable, paste -like gasket sealant,dressing, and coating. Sets quickly toa hard set and is recommended forrigid, permanent assemblies. Use to 400°F. Resistant to gasolineand other solvents.

SEALANT DRESSINGS FOREXISTING GASKETSLOCTITE® GASKET SEALANT 2Reliable, paste - like gasket sealant,dressing, and coating. Sets slowly toa pliable film. Best suited for non-rigid, vibrating assemblies. Use to400°F. Resistant to gasoline andother solvents.

LOCTITE® HIGH TEMPERATUREGASKET MAKERSlow-setting, non-hardening, high-temperature sealant.Recommended for heavy-dutyapplications. Temperature range is -50°F to 600°F (-45°C to 315°C)intermittent. Resists common shop fluids.

LOCTITE® HI-TACK GASKET SEALANTRed-colored, liquid sealant thatholds gaskets in place duringassembly. Seals and bonds rubber,cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky film. Suitable to500°F (260°C). Contains no ozone- depleting compounds.S

SEALANT DRESSINGS FOREXISTING GASKETSLOCTITE® AVIATION GASKET SEALANTReliable, liquid gasket sealant,dressing, and coating. Thin,brushable dressing or sealant for close - fitting parts. Use to 400°F.Resistant to gasoline and other solvents.

LOCTITE® COPPER GASKET ADHESIVEFast drying, metallic, copper sealanthelps dissipate heat, prevent gasketburnout, and improve heat transfer.Fills hot spots and surfaceimperfections. Temperature range is -50°F to 500°F (-45°C to 260°C).Resists shop fluids.

NEW

52

GA

SK

ETIN

G &

SE

ALIN

GA

naer

ob

ics


Package Type & Size TY

PICA

LUS

E

COLO

R

GAP

FILL

CURE

D ST

ATE

VISC

OSIT

Y (c

P)

TEM

PERA

TURE

RANG

E

RECO

MM

ENDE

DPR

IMER

SPEC

IFIC

GRA

VITY

CURE

SPE

ED

AGEN

CYAP

PROV

ALS

504™ Gasket Eliminator ®

5044150480

250 ml tube300 ml cartridge

Orange Gap fillingUnprimed – 0.030"

Primed – 0.050"Rigid

500,000 /1,200,000Thixotropic

-65°F to

300°F

Unprimed – 4 to 24 hrs.Primed –

30 min. to 4 hrs.

N™ orT™ 1.08 N/A


2152550965


Blue Very flexibleUnprimed – 0.010"

Primed – 0.020"Flexible

65,000 /200,000

Thixotropic

-65°Fto

300°F

Unprimed – 6 to 48 hrs.Primed – 1 to 6 hrs.

N™ 1.12 N/A

510™

Gasket Eliminator ®

510315104151074

50 ml tube250 ml tube300 ml cartridge

Red

High temperatureapplications,

excellent solventresistance

Unprimed – 0.010" Primed – 0.020"

Rigid188,000 /500,000

Thixotropic

-65°F to400°F


30 min. to 4 hrs.N™ 1.16

ULClassifiedfor U.S.


515175153151580

6 ml tube50 ml tube300 ml cartridge

PurpleFor flexibleapplications

Unprimed –0.010"

Primed – 0.050"Flexible

275,000 /950,000

Thixotropic

-65°Fto

300°F


15 min. to 2 hrs.N™ 1.10

ULClassified

for U.S.

518™

Gasket Eliminator ®

2242322424518175183151845

KitKit6 ml tube50 ml tube300 ml cartridge

RedFor all metals,

including aluminum flanges

Unprimed – 0.010"Primed – 0.050"

Flexible800,000 /3,750,000Thixotropic

-65°F to300°F

Unprimed – 4 to 24 hrs.Primed – 30 min. to 4 hrs.

N™ 1.13NSF/ANSI

61,CFIA

QuickStix™

548™ GasketEliminator®

391513915239153

9 g stick18 g stick37 g stick

OrangeVertical

applications, castmetal housings

0.010" Rigid Semi-solid-65°F to300°F

Less than 3 hours with or without primer

N™ 1.13 CFIA

549™ 54941 250 ml tube OrangeInstant seal

plastic gasketUnprimed – 0.020"

Primed – 0.050"Rigid 22,500

-65°F to300°F


N™ orT™ 1.25 N/A

568™ 56841 250 ml tube Orange Plastic gasketUnprimed – 0.015"

Primed – 0.050"Rigid 6,500

-65°F to300°F

Unprimed – 12 to 24 hrs.Primed – 2 hrs. to 24 hrs.

N™ orT™ 1.12 N/A

573™ 26392 250 ml tube GreenSlow curing for

extended assemblyoperations

Unprimed –0.010"

Primed – 0.020"

Semi-Rigid

19,000 /60,000

Thixotropic

-65°F to300°F

Unprimed – 6 to 48 hrs.

Primed – 1 to 6 hrs.N™ 1.25 N/A

574™ 2401826338

50 ml tube250 ml tube

OrangeFast curing,large gaps


Semi-Rigid

30,000 /100,000

Thixotropic

-65°F to300°F


15 min. to 2 hrs.N™ 1.11 N/A

5127™ 17430 300 ml cartridge BlueFor flexible

applications,high elongation


Flexible100,000 /500,000

Thixotropic

-65°F to300°F


N™ 1.10 N/A

5182™ 18010 850 ml cartridge RedRobotic applicationon flanges, seals,

covers


Flexible140,000 /580,000

Thixotropic

-65°F to300°F


30 min. to 24 hrs.N™ 1.10 N/A

Loctite® Rigid Assembly Gasketing ProductsProperties Chart

Indicates worldwide availability. Indicates TOP CHOICE products.


Package Type & Size TY

PICA

LUS

E

COLO

R

CONS

ISTE

NCY

VISC

OSIT

Y

TEM

PERA

TURE

RANG

E

OIL

RESI

STAN

CE

NON-

CORR

OSIV

E

CURE

SPE

ED

AGEN

CYAP

PROV

ALS

QuickStix™ 534™

Hi-Tack Gasket Sealant

391553915639157


PurpleVertical,

repositionableSemi-Solid

N/A -65°F to 300°F5 minutes

to setOil

resistant � N/A

Gasket Sealant 1 305103051130512

1.5 oz. tube3 oz. tube7 fl. oz. tube

ReddishBrown

Fast dry,rigid cure

Paste75,000 /

110,000 cP-65°F to 400°F

Full strength – 24 hours

Oilresistant � CFIA

Gasket Sealant 2 30513305143051580964

1.5 oz. tube3 oz. tube7 fl. oz. tube5 gallon can

BlackSlow drying,flexible cure

Paste75,000 /

110,000 cP-65°F to 400°F Remains tacky

Oilresistant � N/A

High Temperature Gasket Maker

30558 7 fl. oz. tube Black High temperature Paste75,000 /

110,000 cP-50°F to 600°F

3 to 5 hours to set


Hi-Tack Gasket Sealant

305243052530526

0.25 pt. brush can1 pt. brush can9 oz. net wt. aerosol

RedImproved heat

transfer,repositionable

Liquid420 /

650 cP

-65°F to 500°F(Aerosol to

600°F)

5 minutes to set

Increasedoil

resistance � N/A

Aviation Gasket Sealant

3051730516

0.25 pt. brush can1 pt. brush can

Dark ReddishBrown

Close tolerance,slow cure

Liquid85 /

140 cP-65°F to 400°F

Full strength – 12 hours


Copper Gasket Adhesive 30535 9 oz. net wt. aerosol CopperImproved heat

transfer, fills surfaceimperfections

Aerosol N/A -50°F to 500°F Remains tackyOil

resistant � N/A

Loctite® Sealing/Dressings for Existing Gaskets Properties Chart

NEW

NEW

LOCTITE® MS 930™

ELASTIC SEALANTHigh elongation and good peel strength make this product a great choice for aggressive seamsealant applications.

LOCTITE® MS 939™

ELASTIC ADHESIVEAdhesive/ SealantHigh elongation and tensilestrength give this product thebest of both worlds. With goodadhesion to many substrates, andgood impact and peel resistance,this product is a great fit for both bonding and sealing applications.

LOCTITE® MS 9360™

ELASTIC ADHESIVEThis product exhibits the highestshear strength on a majority ofsubstrates versus the other productsin this line.

54

GA

SK

ETIN

G &

SE

ALIN

GM

od

ified

Sila

nes

Modified silane adhesives are our newest Loctite® product line. These products exhibit highflexibility and low durometer while maintaining high tensile strength and good adhesion tomany substrates without the use of a primer. These products are isocyanate and solvent - free,non-corrosive, and are compatible with most paint systems.

Modified Silanes

When in contact with ambient moisture, modified silanes begin to curein the same manner as silicones. Ideal for bonding and sealing amultitude of substrates, as well as many applications where siliconescannot be used due to their incompatibility with paint systems.

See our Loctite® Equipment Sourcebook, LT-3669or visit us at www.equipment.loctite.com

for more details.

DISPENSING OPTIONS

Loctite® 300 ml Pneumatic CartridgeDispenser is a manually -controlled,pneumatically -operated unit fordispensing modified silanes packaged in 300 ml cartridges. The operator controlsthe amount and rate of applicationusing the dispense pressure, orifice size,and manual trigger. For available valves, spare parts, accessories anddispense tips, please visit www.equipment.loctite.com.

Item Number: 97002Dimensions: 8" H x 13.5" L x 1.5" DWeight: 18 lbs. (800 g)

NEW

NEW

NEW

Loctite® Stainless Steel Poppet Valve isa double -acting dispense valve. Easilyadapts to 300 ml cartridges or pailpump systems to dispense medium tohigh viscosity, modified silanes. Thisvalve features suck -back capability andoperates at fluid pressures up to 650 psi. For available spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Number: 982621Dimensions: 5.28" H x 2.00" DWeight: 4.2 lbs. (1.9 kg)

55

GA

SK

ETIN

G &

SE

ALIN

GM

od

ified S

ilanes


Package Type & Size

MS 930™413784138541383


Black1.44 to

1.50150 to

250Moisture

10 to 40minutes

-40°F to200°F

20 to 30 490 135 120 1.3 18.7

MS 939™413804138741382


Black1.43 to

1.4920 to 160


-40°F to200°F

52 to 62 500 390 270 2.4 20.1

MS 9360™413794138641384


Black1.32 to

1.4220 to 120


-40°F to200°F

55 to 60 225 475 425 1.72 17.5

Loctite® MS Polymer AdhesivesProperties Chart

COLO

R

EXTR

USIO

N RA

TE(g

/min

ute)

**

CURE

MET

HOD

SKIN

OVE

RTI

ME

SHEA

RST

RENG

TH*

(PSI

)

T-PE

EL (P

LI)

IMPA

CTST

RENG

TH (J

/in.2 )

SPEC

IFIC

GRAV

ITY

TEM

PERA

TURE

RANG

E

DURO

MET

ER(S

HORE

A)

ELON

GATI

ON

TENS

ILE

STRE

NGTH

(PSI

)

NEW

NEW

NEW

* Tensile strength tested on grit blasted steel.** Evaluated at 23°C, 3.5 mm diameter, 3 bar, for 15 seconds.

LOCTITE® HIGH VISCOSITY PASTE PUMP SYSTEMSThese systems are designed specifically to dispense paste products packaged in open- top pails or drums.Various pump ratios are suited for pumping medium tohigh-viscosity pastes. High viscosity paste pump systemsare fully assembled and consist of an air motor, pumptube, and pressure ram.

ItemNumber

RatioOutput

perStroke

MaterialPackage

Size

MaximumProduct

Viscosity (cP)



988717 22:1 6.7 in3 Inert Metal 250 kg 500,000

988718 22:1 6.7 in3 Inert Metal 25 kg 500,000





988721 44:1 6.7 in3 Inert Metal 250 kg 1,000,000

988722 44:1 6.7 in3 Inert Metal 25 kg 1,000,000





988725 64:1 4.6 in3 Inert Metal 250 kg 4,000,000

988726 64:1 4.6 in3 Inert Metal 25 kg 4,000,000



DISPENSING OPTIONS


56

GA

SK

ETIN

G &

SE

ALIN

GS

ilico

ne A

dhe

sive

s&

Sea

lant

s

Silicone Adhesives & Sealants

Loctite® silicone gasketing materials include unique products with excellent fluid resistance, formulations forhigh operating temperatures and UV-curing formulations for cure -in-place production requirements. Siliconegasketing products are best suited for large gap applications and stamped metal assemblies where flangeflexing occurs.

FORMED-IN-PLACELOCTITE® 5045™ FLANGE SEALANTNon- Corrosive, Alkoxy SiliconeRTV paste, excellent for adhesion,sealing and gasketing applications.

LOCTITE® 5600™ SILICONE SEALANTTwo-PartFast, five minute fixture, high adhesion, flexibleadhesive/sealant. Available in black, grey, and almond.

LOCTITE® 5699™ GREY,HIGH PERFORMANCE RTV SILICONE GASKET MAKERFor rigid flange assemblies.Excellent fluid resistance. Easy todispense, non-corrosive, low odor,low volatility. Grey in color.

LOCTITE® 5900® FLANGE SEALANTHeavy Body RTV SiliconeSuperior flexibility and adhesion.Provides instant seal. Excellent fluidresistance. Non-corrosive, low odor,low volatility. Black in color.

LOCTITE® 5905™ FLANGE SEALANTRTV SiliconeSuperior flexibility and adhesion, fast depth of cure. Offersexcellent fluid resistance. Nowavailable in black and white.

LOCTITE® 5910® FLANGE SEALANTRTV SiliconeSuperior flexibility and adhesion.Excellent fluid resistance. Mediumbody and easy to dispense. Non-corrosive, low odor, low volatility.Black in color.

LOCTITE® 5920™ COPPER,HIGH PERFORMANCE RTV SILICONE GASKET MAKERHigh performance for rigid flangeassemblies. Low volatility. Copper in color.

CURED-IN-PLACELOCTITE® 5999™ FLANGE SEALANTHeavy Body/Grey High PerformanceRTV Silicone Gasket MakerFor rigid flange assemblies. Provides instant seal. Excellent fluid resistance. Non-corrosive, lowodor, low volatility. Grey in color.

CURED-IN-PLACELOCTITE® 5039™ NUVA-SIL®

SILICONE ADHESIVE SEALANTDesigned for automated assembly.Rapid, 30 second, UV or visible lightcure permits in line processing.Secondary moisture cure insures full cure even in shadowed areas. Translucent in color.

LOCTITE® 5950™/5951™ FASTGASKET®

FLANGE SEALANTSDesigned for automated assembly.Rapid, 30 second, UV cure permits in line processing. Secondarymoisture cure insures full cure even in shadowed areas. Black/clear in color.

LOCTITE® 5960™ FASTGASKET®

FLANGE SEALANTDesigned for automated assembly.Rapid, 30 second, UV cure permits in line processing. Fluid resistant.Clear in color.

LOCTITE® 5963™ PROCURE®

CURE-IN-PLACE GASKETHeat Cure CompressionSuperior compression set resistance.One-component, exceptional fluidresistance, and heat resistance to150°C. Great for powertrainapplications. Grey in color.

NEW

NEW

GA

SK

ETIN

G &

SE

ALIN

GS

ilicone A

dhesives

& S

ealants

57

Loctite ® Instant Gasket — Return equipment to service immediately when you makeleakproof gaskets in just one minute with Loctite® Instant Gasket.Outperforms precut gaskets.

CURED- IN - PLACE CONT.LOCTITE® 5964™ PROCURE®

CURE-IN-PLACE GASKETHeat Cure CompressionSoft, with greater elongation. Cureswith either convection heat ormicrowave. One-component, goodcompression set for powertrainapplications. Brown in color.

HIGH PERFORMANCE RTV SILICONESLOCTITE® INSTANT GASKETMakes high performance, leakproofgaskets in one minute. Equipmentcan be returned to serviceimmediately. Blowout resistant.Outperforms precut gaskets.

LOCTITE® 598™ BLACK,HIGH PERFORMANCE RTV SILICONE GASKET MAKERRetains high flexibility and oilresistance for longer gasket life.Temperature range is -75°F to 625°F (-59°C to 329°C) intermittent. Lowodor, non-corrosive, low volatility.Resistant to most chemicals andsolvents. Fills gaps to 0.25".

LOCTITE® 587™ BLUE,HIGH PERFORMANCE RTV SILICONE GASKET MAKERForms tough, flexible gasketsdirectly on the flange. Offers excellent adhesion to oily surfaces.Low odor, non-corrosive, lowvolatility. Withstands temperaturesto 500°F (260°C) intermittent.Resistant to most chemicals andsolvents. Fills gaps to 0.25".

SUPERFLEX® RTV SILICONESLOCTITE® SUPERFLEX® BLUE RTV SILICONE ADHESIVE SEALANTCures to a tough, flexible rubber.Makes reliable “formed-in-place”gaskets that resist shrinking,cracking, and migrating. Coats pre-cut gaskets to increase reliability.Temperature range is -65°F to 500°F (-54°C to 260°C) intermittent. Lowvolatility. Fills gaps to 0.25".

LOCTITE® SUPERFLEX® RED HIGH TEMPRTV SILICONE ADHESIVE SEALANTMakes gaskets that resisttemperatures to 600°F (315°C)intermittent. Resists aging, weather,and thermal cycling withoutshrinking, cracking, or hardening.Fills gaps to 0.25".

LOCTITE® SUPERFLEX® NON-CORROSIVERTV CLEAR SILICONE ADHESIVE SEALANTNeutral curing and non- corrosive.For aluminum, concrete, and electrical applications. Temperature resistant to 400°F (204°C) continuous service,500°F (260°C) intermittent.

LOCTITE® SUPERFLEX®

RTV SILICONE ADHESIVE SEALANTGeneral purpose, one-part siliconeadhesive sealant cures at roomtemperature to form a tough rubberseal. Will not slump in overhead orvertical applications. Formulated towithstand extreme temperaturecycling, UV light, and ozone. Cannot be painted. Available inblack, clear, and white.

URETHANE SEALANTLOCTITE® URETHANE SEALANTSingle component, gun-grade caulkthat bonds, seals, and waterproofsup to 180°F. Outstanding adhesionproperties to concrete, masonry,glass, plastics, wood, aluminum, and most other metals.

NEWDISPENSING OPTIONS

EASY DISPENSE AEROSOL CANSYSTEMS FOR LOCTITE® SILICONES

Several Loctite® silicones arenow available in the mostadvanced system for dispensingsilicones. This new packageoffers effortless fingertipcontrol, ease of use (even upsidedown), and accurate dispensingwhile eliminating the waste,mess, and caulking gunsneeded for other siliconedispense systems.

Available Item Numbers: 40462, 40463, 40464,40466, 40479, 40481, 40482, 40505

NEW

New Easy Dispense Aerosol Cans

GA

SK

ETIN

G &

SE

ALIN

GS

ilico

ne A

dhe

sive

s&

Sea

lant

s

58

Loctite® Formed-In-Place SiliconeGasketing Properties Chart

PRODUCT Item Number

Package Type & Size CU

RE M

ETHO

D

CURE

SPE

ED*

DURO

MET

ER**

SPEC

IFIC

GRA

VITY

TYPI

CAL

USE

COLO

R /

MIX

RAT

IO

GAP

FILL

EXTR

USIO

NRA

TE (g

/min

.)

AGEN

CYAP

PROV

ALS

% E

LONG

ATIO

N

TEM

PERA

TURE

RAN

GE(IN

TERM

ITTE

NT)

TENS

ILE

STRE

NGTH

(PSI

†)

5045™404094040840724

3 oz. tube300 ml cartridge40 lb. pail

Clear /N/A

Military,high tensile

0.250" 40-65°F to400°F

Moisture

Tack Free –1.5 hours

Full Cure –24 hours

1.14 25 >500 >493MIL-A-46146B

5600™ Part A - 41327Part B - 41732

440 lb. drum575 lb. drum Black /

2:1 A:Bby

volume

Highadhesion,fast fixture

Unlimited N/A-40°F to450°F

Two-partTack Free – 10 minutes

1.4 40 200 205UL Listedfor U.S.

Part A - 922122Part B - 922089

4.5 gallon pail4.5 gallon pail

922546 400 ml dual cartridge

Part A - 922129Part B - 41732

440 lb. drum575 lb. drum Grey /

2:1 A:Bby

volume



Two-partTack Free – 10 minutes


Part A - 922128Part B - 922089



Part A - 924107Part B - 922089


Almond / 2:1 A:B

byvolume



Two-partTack Free –10 minutes



5699™

Grey1871818581185821858340505

70 ml tube300 ml cartridge50 lb. pail550 lb. drum190 ml can

GreyOil/waterresistant

0.250" 250-75°F to625°F

Moisture

Tack Free –30 minutesFull Cure –24 hours

1.45 55 160 435 CFIA

5900® 201662106720168

300 ml cartridge50 lb. pail550 lb. drum

BlackHigh

adhesion,instant seal

0.250" 35-65°F to500°F

Moisture


1.34 35 550 200CFIA,

NSF P1

5905™ 3853536923


Black Highadhesion,fast depth

of cure

0.240" 350-65°F to500°F

Moisture


1.30 39 345 270 CFIA4096940515


White

5910® 217462174721748


BlackHigh

adhesion0.240" 600

-65°F to500°F

Moisture


1.34 30 550 200 CFIA

5920™

Copper305428204621472

70 ml tube300 ml cartridge40 lb. pail

CopperHigh

temperature0.240" >300

-65°F to700°F

Moisture


1.05 31 355 275 CFIA

5999™217442829820170


GreyOil/waterresistant,

instant seal0.240" 105

-75°F to625°F

Moisture


1.45 60 175 500 N/A

* Varies with substrates. ** Shore A. † Grit blasted steel.

NEW

NEW



Package Type & Size

5039™ Nuva-Sil® 4043840439


Translucent/Colorless/Fluorescent

222UV or Visible/

Moisture30 seconds

@ 120 mW/cm2 37 210 290 N/A

5950™ Fastgasket® 2928718495


Black 350 UV/Moisture30 seconds

@ 120 mW/cm2 30 200 150UL Classified

for U.S.

5951™ Fastgasket® 18198 40 lb. pail Clear 350 UV/Moisture30 seconds

@ 120 mW/cm2 30 200 150 N/A

5960™ Fastgasket® 3113224707


Clear 350 UV30 seconds

@ 120 mW/cm2 50 260 600 N/A

5963™ Procure® 34337 50 lb. pail Grey 250 Heat 10 minutes @ 150°C 50 360 620 N/A

5964™ Procure® 3434834347


Brown 120Heat/

Microwave10 minutes @ 150°CVFM 2 to 4 minutes

32 530 635 N/A

3407™ OptiLOC® 35173 30 ml syringe Black 5 Heat 60 minutes @ 150°C 33 >600 >493 N/A

COLO

R

EXTR

USIO

NRA

TE (g

/min

.)

CURE

MET

HOD

CURE

SPEE

D*

HARD

NESS

% E

LONG

ATIO

N

TENS

ILE

STRE

NGTH

(PSI

†)

AGEN

CYAP

PROV

ALS

Loctite® Cured-In-Place Silicone GasketingProperties Chart

59

GA

SK

ETIN

G &

SE

ALIN

GS

ilicone A

dhesives

& S

ealants

P R O D U C T MAIN ATTRIBUTES APPLICATIONS

Instant Gasket Instant seal and blow out resistance, replaces most cut gaskets,low odor, sensor-safe Timing gear and valve covers, water pumps, gear boxes, transmission pans

598™ Black Forms a tough, flexible silicone rubber gasket Oil pans, valve covers, timing gear covers, differential covers

587™ Blue Plant maintenance and small to large-sized OEM Typical automotive gasketing applications

5699™ Grey Excellent oil resistance Rigid flange sealing of transmissions and cast metal housings

5920™ Copper Fills voids in surfaces for a positive seal Adheres to most surfaces

5905™ Black Fast cure, excellent fluid resistance Large gap applications, flange flexing

Superflex® Blue RTV Forms a tough, flexible silicone rubber gasket, oxygen sensor-safe Typical automotive gasketing applications

Superflex® Red High Temp RTV Plant maintenance and small- to large-sized OEM,low silicone volatiles Automotive gasketing, industrial furnaces, boilers, ducting

Superflex® Clear Non-Corrosive RTV Resists steam, chemical and UV ozone exposure Adheres to most surfaces

Superflex® RTV Resists aging, weathering and thermal cycling without hardening,shrinking, or cracking Adheres to most surfaces

Urethane Sealant Life long flexibility, paintable, weather resistant Forming expansion joints, sealing gutters, filling concrete cracks

Loctite® Gasketing Silicones and Urethane Attribute and Application Chart


Package Type & Size

HIG

H P

ERFO

RM

AN

CE R

TV S

ILIC

ON

ESSU

PER

FLEX

®RT

V SI

LICO

NES

URET

HANE

SEAL

ANT

CONS

ISTE

NCY

OIL

RESI

STAN

CE

NON-

CORR

OSIV

E

TEM

PERA

TURE

RANG

E(IN

TERM

ITTE

NT)

SEAL

ING

TIM

E

AGEN

CYAP

PROV

ALS

COLO

R

Instant Gasket 30509305074047940478

5 oz. cartridge7 oz. can190 ml can90 ml can

Black PasteIncreased oilresistance � -75°F to 500°F

(-59°C to 260°C)Operating strength

15 psi – 1 min.

GM 998-5990 Type 1,Ford WSE-M4G323-A6,

Daimler Chrysler MS-GF44 Grade A, CFIA

598™ Black 3401859830598755989140463

0.5 ml tube70 ml tube300 ml cartridge49 lb. pail190 ml can

Black PasteExcellent oilresistance � -75°F to 625°F

(-59°C to 329°C)Tack Free – 30 minutes Full Strength – 24 hours

ABS, CFIA

587™ Blue 58730587755879140462

70 ml tube300 ml cartridge17 liter pail190 ml can

Blue PasteIncreased oilresistance � -75°F to 500°F


UL Listed for U.S.,NSF P1, CFIA, ABS

5699™ Grey 187181858140505

70 ml tube300 ml cartridge190 ml can

Grey PasteIncreased oilresistance � -75°F to 625°F

(-59°C to 329°C)Tack Free – 30 minutesFull Strength – 24 hours

CFIA

5920™ Copper 3054282046


Copper PasteIncreased oilresistance � -65°F to 700°F


CFIA

5905™ Black 38535 300 ml cartridge Black PasteExcellent oilresistance � -65°F to 500°F

(-54°C to 260°C)Tack free – 20 minutesFull Strength – 24 hours

CFIA

Superflex®

Blue RTV30560305333051840482

80 ml tube300 ml cartridge12 oz. tube190 ml can

Blue Paste N/A N/A-65°F to 500°F


N/A

Superflex®

Red High Temp RTV59630596758227940465

80 ml tube300 ml cartridge12 oz. tube190 ml can

Red Paste N/A N/A-75°F to 600°F


CFIA

Superflex® ClearNon-Corrosive RTV

5138751388


Clear Paste Oil resistant � -75°F to 500°F (-59°C to 260°C)

Tack Free – 25 minutesFull Strength – 24 hours

UL Listed for U.S.

Superflex® RTV 593305937540464


Black

Paste N/A N/A-65°F to 450°F


UL Listed for U.S.,NSF/ANSI 51, CFIA

595305957540481


Clear

594305947540466


White

Urethane Sealant39916 10.2 oz. cartridge Grey

Paste N/A N/A-40°F to 180°F(-40°C to 82°C)

Heavy Skin over 2 to 4 hrs.Full Cure – 3 days

CFIA36132 10.2 oz. cartridge Black

Loctite® Silicones and Urethane GasketingProperties Chart

60

Lubricating

ANTI-SEIZE

Loctite® anti - seize products provide protection against rust, corrosion, seizing and galling as well aslubrication. Anti- seizes are typically the products ofchoice for high temperature applications because oftheir unique ability to provide protection in extremetemperature conditions. Each product contains acombination of solid lubricating agents resulting indifferent high temperature limits and lubricities. These are the two major factors in choosing the rightanti - seize product for your application.

Metal-Free

The “Metal-Free” products utilize non-metallic fillers toachieve the high temperature resistance properties aswell as the lubricity. These fillers typically provide amuch higher temperature resistance than that of themetallic fillers and due to the less abrasive nature ofthese fillers, they also typically provide lower K-values,resulting in higher lubricity.

LUBRICANTS

Loctite® lubricants offer superior protection forindustrial equipment. When choosing a lubricant, it isimportant to consider the intended application as wellas the environment of the application. The typicalfunction of a lubricant is to protect against friction andwear; however, in an industrial environment, there areother factors working against the product, includinghigh temperature, harsh chemicals, and contaminants.Lubricants are also used to protect against corrosion bydisplacing moisture and leaving a film on the part.

Why choose a synthetic lubricant?

• Improved high temperature performance• Higher lubricity• Superior water-washout properties• Higher purity

This chart should not be used to specify products without specific testing. It is recommended that you conduct on-parttesting to ensure product performance before specifying any anti -seize or lubricant.


61

LU

BR

ICATIN

GS

elector G

uide

Anti -Seize Selector Guide

What Type of Lubrication is Needed?

Lubricants Selector Guide

Severe Chemical Contact

Loctite® ViperLube®

High PerformanceSynthetic Grease

Loctite® ViperLube®

Clear High PerformanceSynthetic Grease

Krytox® RFE PTFELubricant

Krytox® RFE PTFE High Performance

Lubricant

High Performance

Specialty

Grease Penetrating Oils General Purpose Dry Film

METAL-FREE

METAL-FREE

METAL-FREE

Stainless Steel &Titanium

Incidental FoodContact

Up to 750°F

Extreme Pressure

Thread Lubricant

Up to 2400°F

ElectricallyConductive

Up to 2000°F

Up to 1800°F

Loctite ® Silver Grade Anti-Seize

Loctite ® Moly-50 ™

Anti-Seize

METAL-FREE

Loctite ® HeavyDuty Anti-Seize

METAL-FREE

Loctite ® Food GradeAnti-Seize

METAL-FREE

Loctite ® N-7000 ™ HighPurity Anti-Seize

METAL-FREE

Loctite ® Moly Paste

Loctite ® White Hi-Temp Anti-Seize

Loctite ® NickelAnti-Seize

Loctite® Graphite-50™

Anti-Seize

Loctite ® C5-A®

Copper Based Anti-Seize Lubricant

Up to 1600°F

General Purpose

Up to 2400°F / High Lubricity

Up to 2400°F

Up to 1800°F

Up to 2400°F / High Purity

Power Plant

Water Resistant

Soft Metal

Loctite ® Silver GradeAnti-Seize



Loctite ® HighPerformance N-5000 ™

High Purity Anti-Seize

METAL-FREE

Loctite ® MarineGrade Anti-Seize

Loctite®

Dielectric Grease

Loctite®

Penetrating Oil

Loctite® Solvo-Rust ®

Super Penetrating Oil

Loctite® Maintain®

Lubricant Penetrant

Loctite® Gear, Chainand Cable Lubricant

Loctite® Moly DryFilm Lubricant

Krytox® RFE AdvancedPTFE Dry Lubricant

Loctite® C-200 ®

High Temperature SolidFilm Lubricant

Loctite® HydraulicJack Oil

Loctite® SiliconeLubricant

Loctite® White Lithium Grease

Loctite® ExtremePressure Grease

Loctite® FoodGrade Grease



What Type of Anti-Seize Protection is Needed?

62

LU

BR

ICATIN

GA

nti-

Sei

ze

Anti-Seize

GENERAL PURPOSE

LOCTITE® C5-A® COPPERANTI-SEIZE LUBRICANTExclusive formula suspends copper and graphite in a highquality grease. Protects metal parts from rust, corrosion, galling, and seizing attemperatures to 1800°F (982°C).

LOCTITE® SILVER GRADE ANTI-SEIZEHeavy duty, temperature resistant,petroleum-based lubricantcompound fortified with graphiteand metallic flake. Inert, will notevaporate or harden in extreme cold or heat. For use in assembliesup to 1600°F (871°C).

LOCTITE® NICKEL ANTI-SEIZECopper - free. Recommended forstainless steel and other metalfittings. For preventing corrosion,seizing, and galling in harsh,chemical environments, andtemperatures to 2400°F (1315°C).

GENERAL PURPOSELOCTITE® QUICKSTIX™ C5-A®

COPPER ANTI-SEIZEThe same trusted performancecharacteristics as the Loctite® C5-A®Copper Anti-Seize paste in aconvenient semi-solid stick form.Stick package offers more portability and less mess.


SILVER GRADE ANTI-SEIZENew semi-solid stick offers the sameperformance characteristics as theLoctite® Silver Grade Anti-Seizepaste in a convenient semi-solidstick form. Stick package offersmore portability and less mess.

NEW

NEW

Loctite® Industrial Hand Wipes Clean hands anywhere! Quick and easy to use – no rinsing, drying or residue. Each 91⁄2" x 12" towelis pre -moistened with a powerful citrus -scentedcleaning formula. Towels are abrasive enough toscrub off the toughest grease and grime.

Item Numbers: 34943 – 75 count canister and 34944 – 130 count bucket

CONSIDER THIS…

63

LU

BR

ICATIN

GA

nti-Seize

� Anti-seize is often used as a gasketrelease agent in instances wherereuse of the gasket is desirable.

� Anti-seize is often recommended foruse on spark plug threads andelectrical connections.

HIGH PERFORMANCE

LOCTITE® HEAVY DUTY ANTI-SEIZEExcellent lubricity. METAL-FREEFormulation provides outstandinglubrication to all metals includingstainless steel, aluminum, and soft metals up to 2400°F (1315°C).


HEAVY DUTY ANTI-SEIZENew semi-solid stick offers the sameperformance characteristics as theLoctite® Heavy Duty Anti -Seize pastein a convenient semi -solid stickform. Stick package offers moreportability and less mess.

LOCTITE® MARINE GRADE ANTI-SEIZEMETAL-FREE formulation to protectassemblies exposed directly orindirectly to fresh and salt water,Loctite® Marine Grade Anti -Seizeworks especially well in highhumidity conditions. It has excellentlubricity, superior water wash-outand water spray resistance, andprevents galvanic corrosion. Protects in temperatures from -20°F to 2400°F (-29°C to 1315°C).

LOCTITE® WHITE HI-TEMP ANTI-SEIZEMETAL-FREE, general purpose, non-metallic formulation thatprotects against high temperatureseizing and galling of mated metalparts, up to 2000°F (1093°C). Whitein color, it has excellent lubricityand can be used on various metalssuch as copper, brass, cast iron,steel, and all alloys includingstainless steel.

SPECIALTY

LOCTITE® FOOD GRADE ANTI-SEIZEMETAL-FREE formulation prevents seizure, galling, andfriction in stainless steel and other metal parts up to 750°F (400°C).

LOCTITE® GRAPHITE-50™ ANTI-SEIZEMETAL-FREE, electrically conductive,non-metallic. Temperature resistantup to 900°F (482°C). Highlyelectrically conductive in metal- to -metal joints.

LOCTITE® MOLY PASTEMETAL-FREE, very low friction.Lubricates press fits, protectsduring break- in and under highstatic loads up to 750°F (400°C).Allows maximum clamping fromavailable torque.

LOCTITE® MOLY-50™ ANTI-SEIZEMETAL-FREE, general purpose, thread lubricant. Temperatureresistant to 750°F (400°C). Provides excellent lubricity.

LOCTITE® ZINC ANTI-SEIZEProtects aluminum and ferroussurfaces from seizure and corrosion up to 750°F (400°C).

NEW

HIGH PURITY

LOCTITE® N-7000™

HIGH PURITY ANTI-SEIZEMETAL-FREE formulation provideshigh levels of purity and excellentlubricating properties. For Class 1, 2 and 3 power plant hardware.Temperature resistant to 2400°F (1315°C).

LOCTITE® N-5000™

HIGH PURITY ANTI-SEIZENickel-based. Lubricates andprotects Class 1, 2 and 3 powerplant hardware. Recommended for highly corrosive environmentsto 2400°F (1315°C).

LOCTITE® HIGH PERFORMANCEN-5000™ HIGH PURITY ANTI-SEIZEMaximum lubricating and anti-seizeproperties for Class 1, 2 and 3 powerplant hardware. Temperatureresistant to 2400°F (1315°C).

LOCTITE® N-1000™

HIGH PURITY ANTI-SEIZECertified pure. Copper-based.Suitable for critical, long-term,stainless steel applications and high-nickel, alloy bolting.Recommended for protecting Class 2 and 3 power plant hardware. Temperature resistant to 1800°F (982°C).

64

LU

BR

ICATIN

GA

nti-

Sei

ze

GEN

ERA

L PU

RPO

SEH

IGH

PER

FOR

MA

NCE

SPEC

IALT

YH

IGH

PUR

ITY

Torque GuideProper clampload is anessential part of any boltedassembly fortrouble-freeoperations.Torquing eithernut or bolt creates the clamp load.An anti-seize lubricant used on a bolthelps to develop greater clamp loadfor the same torque compared to anunlubricated bolt. An additionalbenefit is greater uniformity inclamp load among a series of bolts.The relationship between torque andclamp load is expressed in thefollowing equation: T = KFD

Where:T = Torque (in.- lb., ft. - lb., N-m)F = Clamp Load (lb., N)D = Nominal diameter of bolt

(in., ft., m)K = Torque coefficient or nut

factor, determinedexperimentally

K Factors: K factors are obtained on Grade 8, 1⁄2" steel bolts and grade 5 nuts by a test procedure whichmeasures torque tension properties.Lubricant was applied to the boltthreads and both faces of the washer.

See the Properties Chart for thetorque coefficient or K value for theanti-seize compounds.

Henkel Corporation believes thatthis data fairly representsperformance to be expected.However, Henkel makes no warrantyof specific performance on anyindividual fastener. In criticalapplications, it is necessary todetermine K values independently.

Note: There are two “coefficients” used to expressthe relationship between torque and tension:torque coefficient (also called “nut factor”) is themost commonly used. A different concept is the“friction coefficient,” which has value 2⁄3 (or 67%)of the torque coefficient.

Loctite® Anti-Seize Properties Chart

TEMPERATURERESISTANCE COLOR K-

VALUEP R O D U C T ItemNumber

PackageType & Size

C5-A® Copper Anti-Seize Lubricant

5129951277510015100251144511475100551003510045100651007396435100851009385845101151146

2 g pouch7 g pouch1 oz. tube4 oz. tube4 oz. brush-top can8 oz. brush-top can10 oz. brush-top can12 oz. net wt. aerosol13 oz. cartridge1 lb. can1 lb. brush-top can1 lb. brush-top metal can2.5 lb. can8 lb. can25 lb. pail42 lb. pail425 lb. drum

1800°F(982°C)

Copper 0.16

QuickStix™ C5-A®

Copper Anti-Seize3722939222

20 g stick40 g stick

Silver Grade Anti-Seize

38181802097673276759767648020676775

7 g pouch4 oz. brush-top can8 oz. brush-top can12 oz. net wt. aerosol1 lb. brush-top can1 gallon can5 gallon pail

1600°F (871°C)

Silver 0.18

QuickStix™ SilverGrade Anti-Seize

3723039223

20 g stick40 g stick

Nickel Anti-Seize 771245128651102771645115277175

8 oz. brush-top can12 oz. net wt. aerosol1 lb. can1 lb. brush-top can8 lb. can5 gal. pail

2400°F(1315°C)

Silver 0.13

Heavy Duty Anti-Seize

5160951605516065160751608

1 oz. tube9 oz. brush-top can1.2 lb. brush-top can2.3 lb. can45 lb. pail

2400°F(1315°C)

Black 0.16

QuickStix™ Heavy Duty Anti-Seize

41205 20 g stick2400°F

(1315°C)Black 0.16

Marine Grade Anti-Seize

3439534026

8 oz. brush-top can16 oz. brush-top can

2400°F(1315°C)

Black 0.18

White Hi-Temp Anti-Seize

3451734518

8 oz. brush-top can16 oz. brush-top can

2000°F(1093°C)

White 0.16

Food Grade Anti-Seize

511685117051171

8 oz. brush-top can2 lb. can40 lb. pail

750°F(400°C)

White 0.13

Graphite-50™ Anti-Seize 51084 1 lb. can 900°F (482°C) Black 0.13

Moly Paste

51050510485104951145

12 oz. net wt. aerosol8 oz. brush-top can1 lb. brush-top can15 lb. can

750°F(400°C)

Black 0.11

Moly-50™ Anti-Seize 51094 1 lb. can 750°F (400°C) Black 0.13

Zinc Anti-Seize 39901 1 lb. can 750°F (400°C) Grey 0.15

N-7000™ High Purity Anti-Seize

512725127051273

8 oz. brush-top can1 lb. brush-top can2 lb. can

2400°F(1315°C)

Silver 0.16

N-5000™ High PurityAnti-Seize

5134651243512695124651245

1 oz. tube8 oz. brush-top can1 lb. brush-top can2 lb. can8 lb. can

2400°F(1315°C)

Silver 0.15

High Performance N-5000™ High Purity Anti-Seize

51572 1 lb. brush-top can2400°F

(1315°C)Silver 0.15

N-1000™ High PurityAnti-Seize

511155111651117

8 oz. brush-top can1 lb. can2 lb. can

1800°F(982°C)

Copper 0.17

NEW

NEW

NEW


65

LU

BR

ICATIN

GA

nti-Seize

Heading

The

LOCTITE® BRAND METAL-FREE ANTI-SEIZE PRODUCTS

MAX

IMUM

ANT

I-SE

IZE

PROP

ERTI

ES

FOR

MAX

IMUM

LUBR

ICIT

Y

FOR

LOW

SPE

EDS,

HIGH

LOA

DS

EXTR

EME

HIGH

TEM

PERA

TURE

RES

ISTA

NCE

(TO

2000

°F–2

400°

F)

EXTR

EME

CHEM

ICAL

RESI

STAN

CE

ELEC

TRIC

ALLY

COND

UCTI

VE

FOR

ALUM

INUM

/SO

FT M

ETAL

S

FOR

STAI

NLES

SST

EEL

MET

AL-F

REE

FORM

ULAT

ION

COPP

ER-F

REE

FORM

ULAT

ION

KEY

SPEC

IFIC

ATIO

NSAN

D AG

ENCY

APPR

OVAL

S

Loctite® Anti -SeizeApplication Chart

P R O D U C T

� Preferred Choice � Good Choice � Acceptable Choice

GEN

ERA

LPU

RPO

SEH

IGH

PER

FOR

MA

NCE

SPEC

IALT

YH

IGH

PUR

ITY

C5-A® Copper Based Anti-Seize Lubricant � � � � MIL-PRF-907F,

CFIA (QuickStix™)

Silver Grade Anti-Seize � � � � MIL-PRF-907F,ABS, CFIA

Nickel Anti-Seize � � � � � � ABS

Heavy Duty Anti-Seize � � � � � � � � N/A

Marine Grade Anti-Seize � � � � � ABS

White Hi-Temp Anti-Seize � � � � � � N/A

Food Grade Anti-Seize � � � � NSF H1, CFIA

Graphite-50™ Anti-Seize � � � � � � N/A

Moly Paste � � � � � � N/A

Moly-50™ Anti-Seize � � � � � � MIL-PRF-83483

Zinc Anti-Seize � � � � N/A

N-7000™ High Purity Anti-Seize � � � � � � N/A

N-5000™ High Purity Anti-Seize � � � � � � N/A

High Performance N-5000™

High Purity Anti-Seize � � � � � � � N/A

N-1000™ High Purity Anti-Seize � � � � N/A

66

LU

BR

ICATIN

GLu

bri

cant

s

Lubricants

SYNTHETIC/HIGHPERFORMANCELOCTITE® VIPERLUBE®

HIGH PERFORMANCE SYNTHETIC GREASENLGI grade 2/severe duty GC-LBgrease provides superior protectionfor equipment exposed to a widerange of operating temperatures andenvironments. Use as a lubricant andprotective anti -rust film on bearings,machine parts, equipment, or as arelease agent on gaskets and seals. NSF H1 rated for incidental food contact.

LOCTITE® VIPERLUBE®

CLEAR HIGH PERFORMANCESYNTHETIC GREASELasts four times longer thanpetroleum-based lubricants.Withstands temperatures up to420°F (520°F intermittent). ContainsPTFE for added protection againstfriction and wear. Non-flammable.Contains no ozone -depletingcompounds. NLGI #2 grade grease.Opaque white in color.

SPECIALTY OILS ANDLUBRICANTSKRYTOX® RFE PFPE LUBRICANTThis grease lubricant has excellentlubrication properties over a broadtemperature range, will not causecracking or swelling, and contains acorrosion inhibitor to protect againstundue wear. Eliminates sticking andaids in disassembly. Non-flammable,chemically inert. Compatible withchlorine. See product descriptionsheet for test results.

SPECIALTY OILS ANDLUBRICANTS CONT.KRYTOX® RFE PFPE HIGHPERFORMANCE LUBRICANTSpecially - formulated, syntheticgrease designed to provide long -lasting lubrication for all types ofmoving and/or sliding parts. Thislubricant provides corrosionprotection and wear resistance overa broad temperature range.

KRYTOX® RFE ADVANCEDPTFE DRY LUBRICANTA high performance, syntheticlubricant designed to provide long-lasting lubrication for parts thatrequire a dry, thin lubricating film.This lubricant provides excellentlubrication properties over a broadtemperature range, and dries to thetouch in 60 seconds. It is non-oily,non- staining, non-migrating, andwon’t attract dirt or dust.

LOCTITE® GEAR, CHAIN ANDCABLE LUBRICANTProtects and prolongs the life ofgears, chains, wire rope, and cable.Repels dirt, sand, and dust withminimal “throw-off ” fromcentrifugal force. Contains no ozone-depleting compounds.

LOCTITE® SILICONE LUBRICANTMultipurpose lubricant stopssticking, friction, squeaking, and binding of moving parts. Non-gumming. Will not mar paint, rubber, or plastic surfaces. Waterproofs andelectrically insulates. CFIA approved.

SPECIALTY OILS ANDLUBRICANTS CONT.LOCTITE® MOLY DRY FILM LUBRICANTSolid film lubricant for sliding surfaces and slow moving parts.Temperature resistant up to 750°F(400°C) as a dry film lubricant,2400°F (1315°C) as an anti-seize.Won’t squeeze out, burn off, or pick up dirt.

LOCTITE® SOLVO-RUST®

SUPER PENETRATING OILFrees rusted parts and keeps them lubricated and protected from rust after use. May be appliedon or near moving parts. Will notharm painted surfaces. Contains no ozone-depleting compounds. CFIA approved.

LOCTITE® C-200® HIGH TEMPERATURESOLID FILM LUBRICANTSolid film protection for engine parts,bearings, and servo-mechanisms.Temperature resistant up to 750°F(400°C) as a dry film lubricant,2400°F (1315°C) as an anti-seize.

LOCTITE® PENETRATING OILPenetrates, lubricates, and displaces moisture. Protects against rust and corrosion. Containsno ozone-depleting compounds.

PETROLEUM-BASED GREASESLOCTITE® WHITE LITHIUM GREASEGeneral-purpose lubricating pastefor metal - to -metal and metal - to -plastic applications. Providescorrosion protection. Contains noozone-depleting compounds.

LOCTITE® DIELECTRIC GREASEProvides a moisture -proof barrier that lubricates and protects electrical equipment from salt, dirt, and corrosion. High dielectric strength. Goodthermal, oxidation, and chemical stability.

LOCTITE® EXTREME PRESSURE GREASELubricates gears, bearings, andslides up to 450°F (232°C). NLGI #1rated. Withstands extremes ofpressure, resists water washout.Maintains pumpability at lowtemperatures; will not take a hard set after cooling.

LOCTITE® HYDRAULIC JACK OILNon-corrosive oil improveslubrication in all types of hydraulicunits (except hydraulic brakes).Contains antioxidant, anti-rust, and anti-wear additives.

PETROLEUM-BASED GREASESLOCTITE® FOOD GRADE GREASEExtreme pressure grease withtemperature resistance to 450°F(232°C). NLGI #2 rated. Protects after flushouts and steam cleaning. NSF H1 rated for incidental food contact.CFIA approved.

LOCTITE® MAINTAIN®

LUBRICANT PENETRANTMoisture Displacer & Rust PreventerSpray -on rust preventative for allmetal parts. Unfreezes rusted parts,displaces and seals out moisture. For use on steel, aluminum, brass,copper, magnesium, and othermetals and alloys. Contains noozone-depleting compounds. CFIA approved.

67

LU

BR

ICATIN

GLub

ricants

� Dry film lubricants are an ideal choicefor “unclean” environments wherethere is potential for dirt and othercontaminants to come in contact with the product. Contaminants willnot stick like they would with astandard grease.

� Loctite® Maintain® Lubricant Penetrantis a moisture displacer, a rustpreventative, and is an excellentalternative to WD-40.

DISPENSING OPTIONS

For spare parts and accessories, please see ourLoctite® Equipment Sourcebook, LT-3669 or

visit us at www.equipment.loctite.com.

Loctite® Industrial Pneumatic Grease Dispenser is a hand held, pneumatically-operated grease dispenser for industrial use.

Item Number: 98432Dimensions: 15" H x 2.5" W x 7.25" DWeight: 4.5 lbs. (2063 g)Package Types & Sizes: 300 ml cartridges and all bulk containers

Loctite® Industrial Cordless ElectricGrease Dispenser is a hand held,electrically-operated 12-volt greasedispenser for industrial use.

Item Number: 98433Dimensions: 19.5" H x 3.5" W x 8" DWeight: 7.7 lbs. (3486 g)Package Types & Sizes:

300 ml cartridges and all bulk containers

Loctite® Industrial Manual GreaseDispenser is a hand held, lever action,manually-operated grease dispenserfor industrial use.

Item Number: 98431Dimensions: 15" H x 2.5" W x 4.5" DWeight: 3.7 lbs. (1678 g)Package Types & Sizes:

300 ml cartridges and all bulk containers

68

LU

BR

ICATIN

GLu

bri

cant

s

SPEC

IALT

Y O

ILS

AN

DLU

BR

ICA

NTS


Package Type & Size

Krytox® RFE PFPELubricant

2971031361

2 oz. tube16 oz. cartridge

-15°F to 500°F(-26°C to 260°C) � � � � � � � 2

Krytox® RFE PFPE HighPerformance Lubricant

2971129709

2 oz. tube16 oz. cartridge

-15°F to 500°F(-26°C to 260°C) � � All plastics

and metals � � � � 2

Krytox® RFE AdvancedPTFE Dry Lubricant

30138 8 oz. net wt. aerosol-15°F to 500°F

(-26°C to 260°C)Once film

is dry � � � Waterrepellent

N/A

Krytox® RFE LubricantsProperties Chart

* Per BAM 8104-411 & MSFC 106B under specific conditions. Test the proposed application thoroughly before use.

NON-

FLAM

MAB

LE

TEM

PERA

TURE

RESI

STAN

CE

HIGH

LOA

DCA

PABI

LITY

CORR

OSIO

NIN

HIBI

TORS

CHEM

ICAL

LYRE

SIST

ANT

OXYG

ENCO

MPA

TIBL

E*

THER

MAL

LYST

ABLE

WAT

ER/S

TREA

MRE

SIST

ANT

NLGI

GRA

DE

COM

PATI

BLE

WIT

HAL

L PL

ASTI

CS,

MET

ALS,

AND

ELAS

TOM

ERS

SYN

THET

IC/H

IGH

PER

FOR

MA

NCE

TYPE

OF

LUBR

ICAN

T

TEM

PERA

TURE

RESI

STAN

CE

VISC

OSIT

Y GR

ADE

POUR

POI

NT(A

STM

D 9

7)

FOUR

BAL

L TE

ST

DROP

POI

NT

SPRA

Y TE

ST(A

STM

B-1

11)

NLGI

RAT

ING

AGEN

CYAP

PROV

ALS

Loctite® ViperLube® Synthetic LubricantsProperties Chart


Package Type & Size

ViperLube®


367803678136782367833678436786370613771039146

1 cc tube3 oz. tube14 oz. cartridge 400 g can0.42 oz. tube10.1 oz. net wt. aerosol30 lb. pail120 lb. drum55 gallon drum

400°F (204°C)continuous

500°F (260°C)intermittent

Synthetichydrocarbon

(polyalphaolefin based)

240 CST

N/A0.45 mm

(ASTM D 2266)

2

500°F(260°C)(ASTM D 556)

PassNSF H1,

CFIA

ViperLube®

Clear High PerformanceSynthetic Grease

393413934239364

3 oz. tube400 g cartridge30 lb. pail



Synthetichydrocarbon

(polyalphaolefin based)

N/A N/A0-60 mm

(ASTM D 2266)

2

< 590°F (< 310°C)

(ASTM D 2265)

N/ANSF H1,

CFIA

Thickener TypeCalcium

SulfonateViperLube ®

Silica Gel ViperLube ®

Clear

Lithium Soap

LithiumComplex

AluminumComplex

CalciumComplex

Barium Soap

Sodium Soap Bentone Polyurea

Calcium SulfonateViperLube ® SC FC FC NC FC SC NC NC NCSilica Gel ViperLube ® Clear SC FC FC FC NC FC NC FC NA

Lithium Soap FC FC FC NC FC SC NC NC SC

Lithium Complex FC FC FC NC FC SC NC NC SC

Aluminum Complex NC FC NC NC NC NC SC NC NC

Calcium Complex FC NC FC FC NC SC NC NC SC

Barium Soap SC FC SC SC NC SC NC NC NA

Sodium Soap NC NC NC NC SC NC NC NC NC

Bentone NC FC NC NC NC NC NC NC NC

Polyurea NC NA SC SC NC SC NA NC NC

FC = Fully CompatibleSC = Somewhat Compatible (Mixtures soften but remain grease-like)

NC = Not Compatible (Mixtures soften severely and do not remain grease-like)NA = Not Available

Grease Compatibility Chart

69

LU

BR

ICATIN

GLub

ricants

SYN

THET

IC/H

IGH

PER

FOR

MA

NCE

SPEC

IALT

Y O

ILS

AN

D L

UBR

ICA

NTS

PETR

OLE

UM-B

ASE

D G

REA

SES

HIGH

TEM

PERA

TURE

CLOS

E FI

TTIN

GPA

RTS

ELEC

TRIC

ALLY

COND

UCTI

VE

ELEC

TRIC

ALEQ

UIPM

ENT

GEAR

,BEA

RING

S,CA

BLE

AND

CONV

EYOR

S

FOR

HIGH

SPE

EDBE

ARIN

GS

FOR

LOW

SPE

EDS

AND

HIGH

LOA

DS

CHAI

N-DR

IVEN

EQUI

PMEN

T

HYDR

AULI

C UN

ITS

(NOT

BRA

KES)

SOLI

D FI

LM

Loctite® Lubricants Properties andApplications Chart


Package Type & Size

TemperatureResistance FO

OD P

ROCE

SSIN

GEQ

UIPM

ENT


ViperLube®


367803678136782367833678436786370613771039146

1 cc tube3 oz. tube14 oz. cartridge 400 g can0.42 oz. tube10.1 oz. net wt. aerosol 30 lb. pail120 lb. drum55 gallon drum



� � � � � � � � �

ViperLube® ClearHigh PerformanceSynthetic Grease

393413934239364

3 oz. tube400 g cartridge35 lb. pail



� � � � � � �

Gear, Chain andCable Lubricant

81251 12 oz. net wt. aerosol 250°F

(121°C) � �

Silicone Lubricant 5136081246

150 g tube13 oz. net wt. aerosol

400°F(204°C) � � � �

Moly Dry FilmLubricant

39895398963989739898

12 oz. net wt. aerosol1.3 lb. can10 lb. can50 lb. drum

750°F(400°C) � � � � � �

Solvo-Rust® SuperPenetrating Oil

81252 12.25 oz. net wt. aerosol250°F

(121°C) �C-200® HighTemperature SolidFilm Lubricant(For uncleanEnvironments)

3989339894

1.3 lb. can10 lb. can

2400°F(1315°C) � � � �

Penetrating Oil 8003251221

1 pint spout can12 oz. net wt. aerosol

100°F(38°C) �

White LithiumGrease

3053030543

1.5 oz. tube10.75 oz. net wt. aerosol

380°F (193°C)(dropping point) � � �

Dielectric Grease 3053637535

0.33 oz. tube3 oz. tube

400°F(204°C) � � �

Extreme PressureGrease

51242 14.5 oz. cartridge450°F

(232°C) � � �Hydraulic Jack Oil

3052230523

1 quart can1 gallon can

120°F(48°C) �

Food Grade Grease

51252 14.5 oz. cartridge450°F

(232°C) � � �Maintain® LubricantPenetrant

81204 16 oz. net wt. aerosol250°F

(121°C) � �

Machining Compounds

70

Loctite® Clover® machining compounds (abradingcompounds) are abrasive pastes designed especially for thecutting, smoothing and finishing of metal surfaces. Theyare silicon carbide filled and are used as a supplementalprocess to grinding, milling, boring, and EDM machiningon high or low tensile strength materials, includingforged or hardened gears. These compounds produce anultra-flat surface but not a polished one.

How does grit size affect metal removal?Grit size directly relates to the finish left on the metalsurface. A very coarse grit, such as our 54 grit, willquickly remove metal from the surface and leave asomewhat rough finish. To achieve a smoother finish, asmaller grit size should be used, such as 1,000 grit. Thiscompound will fill the smaller metal voids andtherefore leave a smoother finish.

Benefits• Premixed and ready to use for consistent performance

that is unattainable from mix -your -own slurries.

• Manufactured from premium abrasive grits. Only virgin silicon carbide abrasives, carefully sized, are used.

• Water soluble. The compound clings to blades forsuperior honing action, but washes away easily. (Pat Gel® Water Mix only)

• Biodegradable. (Pat Gel® Water Mix only)

Loctite® Adhesives and Sealants Product Specialists are available to assist you. For application assistance, call 1-800-LOCTITE(562- 8483) or visit www.loctite.com and select “Contact Loctite.”In Canada, please call 1-800-263-5043.

71

MA

CH

ININ

GC

OM

PO

UN

DS

Selecto

r Guid

e

What Type of Honing is Needed?

Machining Compounds Selector Guide

Fairway Mower Maintenance

Loctite® Clover ® Silicon Carbide Grade F – 100 Grit

Fastest Removal of Metal

Loctite® Clover ® Silicon Carbide Grade J – 54 Grit

Cylinder Lapping

Loctite® Clover ® Silicon Carbide Grade C – 220 Grit

Loctite® Clover ® Silicon Carbide Grade B – 240 Grit




Tee and Green Mowers/Tournament Blades

Loctite® Clover ® Silicon Carbide Grade E – 120 Grit

General Purpose for theControlled Removal of Metal

“Initial Cut” Fast Removal of Metal

Loctite® Clover ® Silicon Carbide Grade 2A – 400 Grit



Fine Polishing and Lapping




Polishing and Precision Lapping

Loctite® Clover ® Silicon Carbide Grade A – 280 Grit


Finishing, Valve Lapping,Bearings, Dies and Gauges

Loctite® Clover ® Silicon Carbide Grade E – 120 Grit

Loctite® Clover ® Silicon Carbide Grade D – 180 Grit

Loctite® Clover ® Silicon Carbide Grade C – 220 Grit

Mower Blade/Bed Knife Sharpening

Very Coarse – Medium Grit Fine – Extremely Fine Grit


AVERAGE PARTICLE SIZEOF ABRASIVE GRAINS

LOCTITE® CLOVER®

SILICON CARBIDE GREASE MIXThe standard abrasive paste for fastmetal removal. Produces a smooth,flat surface but not a polished one.Leaves a rust-preventing film onlapped surfaces.

LOCTITE® CLOVER® SILICON CARBIDEPAT GEL® WATER MIXPaste formulation for fast metal removal. Biodegradable,recommended for applications wherecleanup with water is required.

LOCTITE® CLOVER® DUPLEX PACKAGINGLoctite® Clover® Silicon CarbideGrease Mix in two convenient gritsizes (120 and 280). Item number39598. (Kit)

Loctite® Clover® Grade and GritSelector Guide

G R A D E G R I T Texture and Use 1/1000inches

Microns(0.001 mm)

7A 1200

Extremely Fine: Polishing, high precision lapping

0.12 3

6A 1000 0.20 5

5A 800 0.38 9

4A 600

Very Fine: For fine polishing and lapping

0.56 14

3A 500 0.68 17

2A 400 0.90 23

1A 320 Fine: For finishing, valve lapping bearings,dies, and gauges

1.28 33

A 280 1.75 44

B 240Medium Fine: For cylinder lapping

2.48 63

C 220 2.60 66

D 180 Medium: General purpose for controlled metal removal

3.40 86

NC 150 4.80 122

E 120

Coarse: For the initial “cut” fast removal of metal

5.60 142

F 100 6.80 173

G 80 15.00 267

J 54 Very Coarse: For fastest metal removal 18.00 463

� Loctite® Clover® machiningcompounds can be removed using thesame solvent in which it is carried.

� Loctite® Clover® grease mix productscan be removed using a petroleum-based solvent, Loctite® ODC-FreeCleaner & Degreaser.

� Loctite® Clover® Silicon Carbide PatGel® Water Mix can be removed withwater. Once Loctite® Clover® productsare removed, dry the area thoroughly,and apply oil or grease to the metal toprevent corrosion.

72

MA

CH

ININ

GC

OM

PO

UN

DS

Abrading CompoundsA

bra

din

g

Co

mp

oun

ds

73

MA

CH

ININ

GC

OM

PO

UN

DS

Ab

rading

C

om

po

unds

Loctite® Clover® Products Chart

P R O D U C T G R A D E G R I T Item Number Package Type & Size

Clover® Silicon Carbide Grease Mix C 220 39723 25 lb. pail

D 180 39712 25 lb. pail

E 120 39711 25 lb. pail

F 100 39715 25 lb. pail

Clover® Silicon Carbide Grease Mix J 5439483 1 lb. can

39486 100 lb. drum

G 8039473 1 lb. can

39476 100 lb. drum

F 100

39463 1 lb. can

39465 25 lb. pail

39466 100 lb. drum

E 12039452 1 lb. can

39455 100 lb. drum

NC 150 39499 1 lb. can

D 18039439 1 lb. can

39441 25 lb. pail

C 22039426 1 lb. can

39428 25 lb. pail

B 240 39413 1 lb. can

A 28039401 1 lb. can

39404 100 lb. drum

1A 32039510 1 lb. can

39512 25 lb. pail

2A 400 39523 1 lb. can

3A 500 39536 1 lb. can

4A 60039549 1 lb. can

39551 25 lb. pail

5A 800 39561 1 lb. can

6A 1000 39574 1 lb. can

7A 1200

39587 1 lb. can

39589 25 lb. pail

39590 100 lb. drum

E/A 120/280 39598 Kit - 4 oz. Duplex can

Clover® Silicon Carbide Pat Gel® Water Mix J 54 39488 1 lb. jar

G 8039478 1 lb. jar

39479 25 lb. pail

F 100 39468 1 lb. jar

E 12039457 1 lb. jar

39458* 25 lb. pail

NC 150 39504 1 lb. jar

D 180 39444 1 lb. jar

C 220 39431 1 lb. jar

B 24039418 1 lb. jar

39419* 25 lb. pail

A 280 39406 1 lb. jar

1A 320 39515 1 lb. jar

2A 400 39528 1 lb. jar

3A 50039541 1 lb. jar

39542 25 lb. pail

4A 600 39554 1 lb. jar

5A 800 39566 1 lb. jar

6A 1000 39579 1 lb. jar

7A 1200 39592 1 lb. jar

* Made-to-order items.

74

Potting & Encapsulating

Variables to consider when selecting a potting orencapsulating material include:

• Viscosity of uncured compound• Dispensing requirements• Device operating temperature• Desired chemical resistance• Desired thermal conductivity• Desired flame retardance• Hardness of cured product• Overall cost

There are a variety of potting and encapsulatingcompounds to choose from – epoxy, hot melt, silicone,and urethane. The thermal properties of epoxy and silicone systems make them ideally suited forapplications exposed to temperatures above 125°C. If asoft, flexible material is needed, particularly at lowtemperatures, then a urethane, silicone or hot meltmaterial may be used.

What is the best product for my application?

The following chart will work best when selecting apotting or encapsulating compound. This chart isintended to serve as a general guideline to help youdetermine which categories are best suited for yourapplication. The data presented represents typicalproperties for each product category; however,individual product properties may differ. It is suggestedthat, based on the information provided, you consider at least the two best product categories that meet yourapplication criteria. Individual product information canthen be found on the pages that follow to help younarrow your search.

Potting and encapsulating compounds are used to provide mechanical reinforcement to housed assemblies, to fill large voids, and to protect components from the effects of exposure to chemicals, moisture, mechanicalshock, and vibration. Sealing components with potting and encapsulating compounds prevents corrosion andensures long-term integrity of the device.



75

PO

TTIN

G &

EN

CA

PSU

LATIN

GS

elector G

uide

P E R F O R M A N C EC O N S I D E R AT I O N S

POTTING AND ENCAPSULATING COMPOUNDS

Hot Melts Polyurethanes Epoxies Silicones

BENEFITS Fast, large gap filling Excellent toughness/flexibility Wide range of formulations Excellent temperature resistance

LIMITATIONS Low heat resistanceLiquid adhesive

sensitive to moistureMixing required Low strength

TEMPERATURE RESISTANCE -65°C to +125°C -65°C to +125°C -65°C to +180°C -65°C to +200°C

FLUID RESISTANCE

Polar Solvents1 Good (Polyolefins, Polyamides) Good Very Good Good

Non-Polar Solvents2 Good (Polyamides) Good Excellent Poor

HARDNESS Semi-soft Soft Rigid Soft

FLEXIBILITY High High Low Very High

Tg Low Low High Very Low

P R O C E S SC O N S I D E R AT I O N S

POTTING AND ENCAPSULATING COMPOUNDS

Hot Melts Polyurethanes Epoxies Silicones

NUMBER OF COMPONENTS 1 2 2 1

CURE TEMPERATURE Room Temperature(applied at elevated temperature)

Room Temperature Room Temperature UV/Room Temperature

GEL TIME

Average 60 seconds 1 to 3 hours 1 to 3 hours 30 seconds

Fastest 10 to 20 seconds 15 minutes 15 minutes 5 seconds

FULL CURE TIME 1 hour (or when cooled) 24 hours 24 hours 24 hours

DEPTH OF CURE Unlimited Unlimited Unlimited Shallow (<1.5")

DISPENSING/CURINGEQUIPMENT REQUIRED?

Yes Yes Yes Yes

LIGHT CURE VERSIONS AVAILABLE?

No No Yes Yes

For more information on each compound category refer to pages…

80-81 76-77 76-79 80-81

1 Examples of Polar Solvents: Water, Ethylene Glycol, IPA, Acetone.2 Examples of Non-Polar Solvents: Motor Oil, Gasoline, Toluene, n-Heptane, ATF.

Potting & Encapsulating Selector Guide

L O C T I T E ® H Y S O L ® P O LY U R E T H A N E S

RE

SIN

SH

AR

DE

NE

RS

RE

SIN

SH

AR

DE

NE

RS

EPOXIES & POLYURETHANES

Loctite® Hysol® potting and encapsulating compounds are two-part epoxy and polyurethane systems formulated to offer a wide range ofperformance characteristics matched to specific application requirements.Any epoxy resin can be combined with any epoxy hardener to create amixed system. The same applies to the polyurethane resins and hardeners.

L O C T I T E ® H Y S O L ® E P O X I E S

PRODUCT ItemNumber

PackageType & Size

PackageWeight

KeyFeatures

3140™ 3994439945*

1 gallon pail5 gallon pail

12 lbs.65 lb.

GeneralPurpose

3141™ 3994739948*


12 lbs.63 lbs.

HighTemperature

3142™ 3995039951*


16 lbs.65 lbs.

ThermallyConductive

3145™ 4051240511*


13 lbs.65 lbs.

FlameRetardant

3160™ 39958* 5 gallon pail 40 lbs.Glossy

Surface Finish

3162™ 3996039962*

1 quart can5 gallon pail

1.8 lbs.36 lbs.

Fast Cure

3163™399643996539966*

1 quart can1 gallon pail5 gallon pail

1.7 lbs.7 lbs.38 lbs.

ExcellentAdhesion

3164™ 3996939970*


7 lbs.40 lbs.

GeneralPurpose

3165V 3939539973*

1 quart can1 gallon pail

1.7 lbs.7 lbs.

Low Shrinkage

PRODUCTItem

NumberPackage

Type & SizePackageWeight

KeyFeatures

3173™399843998539986*

1 quart can1 gallon pail5 gallon pail

2.5 lbs.10 lbs.50 lbs.

GeneralPurpose

3182™3999539996*39997*

1 gallon pail5 gallon pail55 gallon pail

12 lbs.62 lbs.625 lbs.

Fast Cure

3183™ 3999839999*


7.5 lbs.37 lbs.

GeneralPurpose

3184™ 3939839397*


12 lbs.625 lbs.

FlameRetardant

76

PO

TTIN

G &

EN

CA

PSU

LATIN

GE

po

xies

&

Po

lyur

etha

nes

Epoxies & Polyurethanes

There are a variety of Loctite® potting and encapsulating compounds to choose from – epoxy, hot melt,polyurethane, and silicone. Loctite® potting and encapsulating compounds are designed to protect electricalcomponents from the effects of exposure to chemicals, moisture, thermal shock, mechanical shock, andvibration. Sealing components with Loctite® potting and encapsulating compounds prevents corrosion andensures long-term integrity of electrical devices.

* Made-to-order items.

Loctite® Mix Nozzles areplastic, disposable nozzlesthat attach directly to Loctite®dispensers. They are designedto automatically mix adhesiveas it travels through thestatic -mix nozzle.

For all available nozzles,accessories, and package sizes, please visitwww.equipment.loctite.com.

Item Numbers: 98430, 98344, 98456,98457, 98458, 98459, 98460, 98461,98467, 98469, 98470, 98473, 98474,98476, 98477, 98478, 989516, and 989518

DISPENSING OPTIONS

77

PO

TTIN

G &

EN

CA

PSU

LATIN

GE

po

xies &

Po

lyurethanes

L O C T I T E ® H Y S O L ® P O L Y U R E T H A N E S Y S T E M S

SYSTEM CHARACTERISTICS 3173™/3182™ 3173™/3183™ 3173™/3184™

TYPICAL UNCURED

PROPERTIES

VISCOSITY (cP)

Resin 75 75 75

Hardener 30,000 800 14,000

Mixed 5,500 450 2,250

WORKING TIME 73°F (23°C) < 7 minutes @ 300 g 20 to 40 minutes @ 105 g 150 minutes @ 300 g

GEL TIME 73°F (23°C) 14 minutes @ 300 g 40 to 70 minutes @ 105 g 150 minutes @ 300 g

CURE CYCLENormal 73°F (23°C) 90 minutes 24 hours 24 hours

Alternate 185°F (85°C) 30 minutes 1 to 3 hours 1 to 3 hours

MIX RATIO

By Weight(Resin:Hardener)

13:87 30:70 15:85

By Volume(Resin:Hardener)

1:5.2 1:3 1:4.8

COLOR

Resin Dark Brown Clear Brown Clear Brown

Hardener Black Opaque Black Opaque White

Mixed Black Opaque Black Opaque White

SPECIFIC GRAVITY

Resin 1.23 1.23 1.23

Hardener 1.60 0.96 1.45

Mixed 1.55 1.06 1.40

TYPICAL CURED

PROPERTIES

Hardness, Shore A 75 70 80

Hardness, Shore 00 N/A N/A N/A

Tg (°C) -10 -16 -15

CTE above Tg (m/mm°C) 128 x 10e-6 190x 10e-6 151x 10e-6

TYPICAL CURED

PROPERTIES

DIELECTRICCONSTANT

0.1 kHz 4.68 5.92 4.51

1.0 kHz 4.02 4.36 4.29

10.0 kHz 3.76 3.65 3.94

100.0 kHz 3.63 3.31 3.56

DISSIPATIONFACTOR

0.1 kHz 0.13 0.22 0.02

1.00 kHz 0.07 0.17 0.04

10.0 kHz 0.04 0.10 0.06

100.0 kHz 0.02 0.05 0.07

Insulation Resistance (ohms) 2.5x10e+13 1.1x10e+11 1.1x10e+12

Volume Resistivity (ohms/cm) 1.5x10e+15 6.83x 10e+12 6.61x 10e+13

Dielectric Strength (Volts/mil) 370 375 370

Flammability Rating N/A N/A 94V-Ø at 3⁄8"

UL File No. E106917 N/A N/A 94V-2 at 1⁄4"

L O C T I T E ® H Y S O L ® E P O X Y K I T S

PRODUCT Item Number Package Type & Size COLOR WORKLIFE HARDNESS (SHORE) AGENCY APPROVALS KEY FEATURES

E-60NC™293242932529326


Black 60 minutes 85 CFIAElectrically non-corrosive,

low viscosity

78

PO

TTIN

G &

EN

CA

PSU

LATIN

GE

po

xies

&

Po

lyur

etha

nes

SYSTEM CHARACTERISTICS

LOCTITE® 3140™ HYSOL® EPOXY SYSTEM LOCTITE® 3141™ HYSOL® EPOXY SYSTEM

3140™/3160™

3140™/3162™

3140™/3163™

3140™/3164™

3140™/3165™

3141™/3160™

3141™/3162™

3141™/3163™

3141™/3164™

3141™/3165™

VISCOSITY(cP)

Resin 11,000 11,000 11,000 11,000 11,000 80,000 80,000 80,000 80,000 80,000

Hardener 180 120 450 105 55 180 120 450 105 55

Mixed 1,700 2,000 1,500 1,500 2,000 7,000 5,000 4,000 6,000 13,000

WORKING TIME

73°F (25°C)80 to 100 min.

@ 200 g5 to 10 min.

@ 100 g80 to 100 min.

@ 200 g10 to 15 min.

@ 400 g1 to 1.5 hrs.

@ 400 g1.5 to 2 hrs.

@ 400 g5 min.

@ 200 g30 to 45 min.

@ 200 g10 min.@ 400 g

35 to 40 min.@ 200 g

GEL TIME 73°F (25°C)2.5 to 3 hrs.

@ 200 g10 to 15 min.

@ 105 g2.5 to 3 hrs.

@ 200 g25 to 35 min.

@ 400 g2 to 3 hrs.@ 400 g

2.5 to 3.5 hrs.@ 400 g

10 to 15 min.@ 200 g

60 to 80 min.@ 200 g

20 to 25 min.@ 200 g

65 to 75 min.@ 200 g

CURE CYCLE

Normal73°F (25°C)

24 hours 16 hours 24 hours 16 hours24 hrs./77°F

+4 hrs./200°F24 hours 24 hours 24 hours 24 hours

24 hrs./77°F+4 hrs./200°F

Alternate150°F (60°C)

2 hours 1 hour 2 hours 2 hours N/A 4 hours 2 hours 2 hours 2 hours N/A

MIX RATIO

By Weight(R:H)

100:20 100:18.1 100:29 100:29.5 100:9 4:1 100:19.8 100:30 100:31.5 100:9

By Volume(R:H)

3.1:1 3.6:1 2:1 2:1 6.5:1 2.5:1 3:1 2:1 2:1 6.5:1

COLOR

Resin Black Black Black Black Black Black Black Black Black Black

Hardener Clear Clear Clear Clear Clear Clear Clear Amber Amber Clear

Mixed Black Black Black Black Black Black Black Black Black Black

SPECIFIC GRAVITY

Resin 1.64 1.64 1.64 1.64 1.64 1.61 1.61 1.61 1.61 1.61

Hardener 1.00 0.99 0.96 0.97 0.96 1.00 0.99 0.96 0.97 0.96

Mixed 1.48 1.48 1.41 1.42 1.55 1.44 1.46 1.40 1.40 1.40

Hardness, Shore D 80 80 80 70 85 85 90 80 85 85

Tg (°C) 27 35 20 27 67 43 75 38 31 104

CTE above Tg (mm/mm°C)

130x10e-6 125x10e-6 133x10e-6 150x10e-6 119x10e-6 160x10e-6 135x10e-6 138x10e-6 111x10e-6 115x10e-5

CTE below Tg (mm/mm°C)

44x10e-6 37.5x10e-6 44.9x10e-6 82.6x10e-6 36.0x10e-6 60.7x10e-6 39.7x10e-6 52.6x10e-6 49.2x10e-6 35x10e-6

DIELECTRICCONSTANT

0.1 kHz 4.43 4.25 4.61 4.2 4.87 4.30 3.91 3.58 4.11 4.28

1.0 kHz 4.37 4.20 4.37 4 4.83 4.22 3.88 3.52 3.97 4.18

10.0 kHz 4.31 4.16 4.20 3.8 4.75 4.14 3.84 3.46 3.87 4.06

100.0 kHz 4.24 4.10 4.05 3.7 4.64 4.03 3.79 3.39 3.77 3.92

DISSIPATIONFACTOR

0.1 kHz 0.008 0.010 0.040 0.08 0.003 0.01 0.01 0.01 0.02 0.01

1.0 kHz 0.008 0.011 0.027 0.04 0.007 0.01 0.01 0.01 0.02 0.02

10.0 kHz 0.010 0.012 0.026 0.03 0.011 0.02 0.01 0.01 0.02 0.02

100.0 kHz 0.014 0.013 0.023 0.03 0.014 0.02 0.01 0.02 0.02 0.02

Insulation Resistance(ohms)

1.14x10e+13 2.67x10e+13 1.61x10e+12 7.5x10e+111 5.19x10e+13 5.72x10e+13 4.09x10e+13 1.23x10e+14 4.57x10e+13 2.15x10e+13

Volume Resistivity(ohms/cm)

6.03x10e+14 2.53x10e+15 1.02x10e+14 1.5x10e+14 2.69x10e+15 4.03x10e+15 2.61x10e+15 7.41x10e+15 2.98x10e+15 1.37x10e+15

Dielectric Strength(Volts/mil)

365 385 365 410 350 375 355 385 395 365

Flammability RatingUL File No. E106917

N/A N/A N/AUL 94B

@ 1/16"N/A N/A N/A N/A N/A N/A

Insulation SystemUL File No. E106917

N/A N/A N/A UL 1446 N/A N/A N/A N/A N/A N/A

TYPI

CAL

UNCU

RED

PR

OPE

RTIE

STY

PICA

L EL

ECTR

ICA

L PR

OPE

RTIE

STY

PICA

L CU

RED

PRO

PERT

IES

79

PO

TTIN

G &

EN

CA

PSU

LATIN

GE

po

xies &

Po

lyurethanes

SYSTEM CHARACTERISTICS

LOCTITE® 3142™ HYSOL® EPOXY SYSTEM LOCTITE® 3145™ HYSOL® EPOXY SYSTEM

3142™/3160™

3142™/3162™

3142™/3163™

3142™/3164™

3142™/3165™

3145™/3160™

3145™/3162™

3145™/3163™

3145™/3164™

3145™/3165™

VISCOSITY(cP)

Resin 95,000 95,000 95,000 95,000 95,000 32,760 32,760 32,760 32,760 32,760

Hardener 180 120 450 105 55 180 120 450 105 55

Mixed 7,500 6,000 7,000 8,000 18,000 5,560 7,150 5,315 5,790 13,355

WORKING TIME

77°F (25°C)1.5 to 2 hrs.

@ 400 g5 to 10 min.

@ 200 g2 hrs.

@ 400 g25 min.@ 400 g

80 min.@ 400 g

2.5 to 4 hrs.@ 200 g

15 to 30 min.@ 200 g

3 to 3.5 hrs.@ 200 g

35 to 45 min.@ 200 g

2.5 to 3 hrs.@ 400 g

GEL TIME 77°F (25°C)3.5 to 4 hrs.

@ 400 g5 to 30 min.

@ 200 g> 3 hrs.@ 400 g

50 min.@ 400 g

2.5 hrs.@ 400 g

6 to 8 hrs.@ 200 g

35 to 45 min.@ 200 g

6 to 7 hrs.@ 200 g

75 to 90 min.@ 200 g

5 hrs.@ 200 g

CURE CYCLE

Normal77°F (25°C)

24 hours 24 hours 48 hours 24 hours24 hrs./77°F

+4 hrs./200°F24 hours 24 hours 24 hours 24 hours

24 hrs./77°F+2 hrs./200°F

Alternate150°F (66°C)

4 hours 2 hrs. 4 hrs. 2 hrs. 4 hrs./+200°F 2 hours 2 hours 4 hours 2 hours 4 hrs./+200°F

MIX RATIO

By Weight(R:H)

100:10.7 100:9 100:10.9 100:14.3 100:4.1 100:15 100 :13 100:15.5 100:20 100: 6

By Volume(R:H)

3.8:1 4.5:1 3.6:1 2.8:1 9.7:1 4:1 4.5:1 3.7:1 2.9:1 9.7:1

COLOR

Resin Black Black Black Black Black Black Black Black Black Black

Hardener Clear Clear Amber Amber Clear Clear Clear Clear Clear Clear

Mixed Black Black Black Black Black Black Black Black Black Black

SPECIFIC GRAVITY

Resin 2.40 2.40 2.40 2.40 2.40 1.67 1.67 1.67 1.67 1.67

Hardener 1.00 0.99 0.96 0.97 0.96 1.00 0.99 0.96 0.97 0.96

Mixed 1.54 1.54 1.53 1.50 1.62 1.51 1.54 1.49 1.49 1.58

Hardness, Shore D 90 90 90 85 90 80 84 80 75 88

Tg (°C) 26 42 30 29 84 28 42 38 32 53

CTE above Tg (mm/mm°C)

104x10e-6 97.2x10e-6 96.1x10e-6 106x10e-6 87.7x10e-6 1.22x10e-6 128x10e-6 130x10e-6 122x10e-6 111x10e-6

CTE below Tg (mm/mm°C)

29.2x10e-6 28.2x10e-6 33.5x10e-6 51.9x10e-6 26.9x10e-6 39.2x10e-6 42.6x10e-6 49.0x10e-6 59.4x10e-6 40.6x10e-6

THERMALCONDUCTIVITY

Watts/Meter°C

0.422 1.40 1.40 1.27 1.14 0.7935 0.8068 0.8119 0.7324 1.0341

DIELECTRICCONSTANT

0.1 kHz 5.77 4.87 5.28 5.51 5.65 4.08 3.81 4.27 4.19 4.43

1.0 kHz 5.69 4.83 5.20 5.35 5.57 4.28 3.85 4.36 4.46 4.45

10.0 kHz 5.62 4.78 5.12 5.21 5.46 4.15 3.74 4.11 4.22 4.28

100.0 kHz 5.52 4.72 5.02 5.06 5.34 4 3.63 3.90 3.99 4.11

DISSIPATIONFACTOR

0.1 kHz 0.00 0.01 0.01 0.02 0.01 0.027 0.028 0.033 0.036 0.045

1.0 kHz 0.001 0.01 0.01 0.02 0.01 0.031 0.025 0.046 0.042 0.036

10.0 kHz 0.01 0.01 0.01 0.02 0.01 0.025 0.021 0.037 0.037 0.027

100.0 kHz 0.01 0.01 0.01 0.02 0.01 0.023 0.017 0.031 0.034 0.024

Insulation Resistance(ohms)

4.61x10e+13 5.31x10e+13 3.65x10e+13 2.75x10e+12 4.09x10e+13 Not Tested Not Tested Not Tested Not Tested Not Tested

Volume Resistivity(ohms/cm)

3.00x10e+15 3.47x10e+15 2.55x10e+15 1.65x10e+14 2.61x10e+15 1.10e+14 8.4e+14 2.1e+14 2.5e+13 7.3e+14

Dielectric Strength(Volts/mil)

360 345 355 345 335 595 693 748 695 794

Flammability RatingUL File No. E106917

N/A N/A N/A N/A N/A N/AUL 94V-0@ 1/8"

N/A N/AUL 94V-0@ 1/8"

TYPI

CAL

UNCU

RED

PR

OPE

RTIE

STY

PICA

L EL

ECTR

ICA

L PR

OPE

RTIE

STY

PICA

L CU

RED

PRO

PERT

IES

80

PO

TTIN

G &

EN

CA

PSU

LATIN

GH

ot

Mel

ts

& S

ilico

nes

Hot Melts & Silicones


HOT MELT ADHESIVEGeneral PurposeMedium setting, general purposehot melt adhesive. Excellentadhesion to wood and many plastics.


HOT MELT ADHESIVEPolyamideLow viscosity polyamide used extensively for potting and encapsulating.

HOT MELT ADHESIVES

In addition to structural bonding, Loctite® Hysol® hot melt adhesivesare also well suited for fast, deep potting applications requiring largegap fills in a high speed manufacturing environment.

SILICONE POTTING COMPOUNDS

Loctite® silicones are single -component, tough protective potting andencapsulating compounds that seal components against moisture,solvents, and environmental conditions. Loctite® Nuva-Sil® productscure in as little as 30 seconds to depths of 0.150" when exposed to UVlight or visible light, while Loctite® RTV silicones cure in 24 hours atroom temperature when exposed to atmospheric moisture.


SILICONE POTTING COMPOUNDHigh Adhesion / Visible LightA low viscosity, self - leveling, UV or visible light curing siliconefor high speed deep potting, coating and sealing applications. Provides high adhesion fordifficult- to -bond substrates.

LOCTITE® 5040™ RTV SILICONE POTTING COMPOUNDA non-corrosive, self - leveling RTVsilicone for shallow potting, sealingand coating of devices, especially formilitary and industrial applications.

Loctite® Meter Mix 3000 Dispense Systems – Programmable Shot Sizeare versatile dispensing systems for two-part adhesive chemistries andincorporates a variety of feed system options. Available in fixed or variable ratio, these systems offer programmable shot size and integrated PLC controls with convenient touch screen capability. For available valves, spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Numbers: Fixed: 988908, Variable: 988909Dimensions: 20" H x 15" W x 28" DWeight: 75 to 100 lbs.Package Types & Sizes: Cans, pails, drums, totes

DISPENSING OPTIONS

81

PO

TTIN

G &

EN

CA

PSU

LATIN

GH

ot M

elts &

Silico

nes



Package Type & Size

VISC

OSIT

Y (c

P)AT

DIS

PENS

ETE

MPE

RATU

RE

COLO

R

TENS

ILE

STRE

NGTH

(PSI

)

OPEN

TIM

E

TEM

PERA

TURE

RESI

STAN

CE

HARD

NESS

(SHO

RE A

)

AGEN

CYAP

PROV

ALS

% E

LONG

ATIO

N

1942™ Hysol® 8326683267832688326983271832728327383274832758327683277

5 lb. sample bag pellets40 lb. carton pelletsMaxistick™ 7 oz. sample bagMaxistick™ 35 lb. cartonPT™ stick 36 lb. cartonMinistick™ 35 lb. cartonSuperstick™ 10" 5 oz. sample bagSuperstick™ 10" 25 lb. bagSuperstick™ 4" 25 lb. cartonPolyshot™ 12 oz. sample bagPolyshot™ 35 lb. Carton

Tan 5,000 25030


FDACFR175,105

3650™ Hysol® 3130231297

22 lb. pellets44 lb. pellets

Light Beige 2,900 305 60 to 80 seconds 176°F 43 87 N/A

3651™ Hysol® 31303 26.4 lb. squares Beige 10,000 334 80 to 100 seconds 266°F 790 55 N/A

7809FR™ Hysol® 833888339083391

5 lb. sample bag pelletsSuperstick™ 10" 13 oz. sample bagPolyshot™ 13 oz. bag

Amber 7,000 36335

seconds240°F 373 85


7811™ Hysol®833378333983340

5 lb. sample bag pelletsPolyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

Amber 6,400 40035

seconds266°F 1,200 N/A N/A

7901™ Hysol® 83341833428334383344

5 lb. sample bag pellets40 lb. carton pelletsPolyshot™ 13 oz. sample bagPolyshot™ 25 lb. pail

Amber 750 26035

seconds300°F 80 84 N/A

Loctite® Silicone Potting CompoundsProperties Chart


Package Type & Size

CURE SCHEDULE(CURE/ALT. CURE)

VISCOSITY(cP)

GEL TIME HARDNESSAGENCY

APPROVALS

5031™

Nuva-Sil®4008640087


UV/visible light/moisture60 seconds @ 40 mW/cm2 5,500 Seconds 34 shore A N/A

5040™404054040440407

85 g tube300 ml cartridge40 lb. pail

Moisture24 hours @ 25°C

35,000< 3 hours(skin over)

30 shore A MIL-A-46146B

5091™

Nuva-Sil® 1741218074


UV/moisture60 seconds @ 40 mW/cm2 5,500 Seconds 34 shore A


Loctite® Hysol™ Bulk-34 System is a compact andefficient bulk hot melt unit capable of manual orautomatic product delivered up to 75 lbs. /hr. This CE certified unit has three independent temperaturecontrols for the tank, hosing and dispense valves thatwill provide an effective extrusion or spray applicationfor a wide range of hot melt adhesives. For availablevalves, spare parts, accessories and dispense tips,please visit www.equipment.loctite.com.

Item Number: 98135 Voltage: 230Standard Tank Capacity: 34 lbs. (15.4 kg)System Power Consumption: 6600 Watts

DISPENSING OPTIONS

For similar equipment, please see ourLoctite® Equipment Sourcebook, LT-3669 or

visit us at www.equipment.loctite.com.

Loctite® Hysol™ Bulk Hot Melt System ApplicatorsHenkel offers accurate and convenient styles of dispense applicators. For available valves, spare parts and applicators,please visit www.equipment.loctite.com.

Item Numbers: 98145, 98146, 98147, 98148, and 98149

82

Repairing, Rebuilding& Restoring

Choosing a repair epoxyWhen choosing a repair epoxy, there are several factorsto consider, the most important of which is substrate.Loctite® Fixmaster® repair epoxies are designed tooptimize performance on various substrates. Thecoefficient of thermal expansion differs from one metalto the next; matching the correct product to eachsubstrate will make a big impact on the integrity of therepair. The application and service environment arealso important to consider because machinability andcorrosion resistance also differ between the products.

What is the proper surface preparationfor repair epoxies?A properly prepared surface is one that has beencleaned, dried, and abraded. Substrates should be freefrom contamination including oils, grease, dust, etc. Itis also important that a surface is dry* before workingwith a repair epoxy because moisture on the surfacecan interfere with the curing process. The finalcomponent is to abrade the surface, which provides anincreased surface area for bonding. When working withmetals, the surface should be abraded to a near whitemetal finish, which also helps to ensure that all surfacecorrosion is removed.


* Loctite® Fixmaster® Wet Surface Repair Putty & Loctite® Fixmaster® Underwater Repair Epoxy have been specially formulated to cure in wet orunderwater applications.

83

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Selecto

r Guid

e

Belt Repair & Urethanes Selector Guide

Fast Return to Service

Longer Working Time

Loctite® Fixmaster ®

Instant Belt RepairLoctite® Fixmaster ®

Rapid Rubber Repair


Flex™ Conveyor Belt Repair Kit


Flex 80™ Liquid


Flex 80™ Putty

What Type of Application is Needed?

Short Term Long Term Castable

Trowelable

Belt Repair General Rubber Repair

Loctite® Maintenance & Repair Epoxies Selector Guide

Loctite ® Fixmaster ®

Poxy Pak ™


High Performance Epoxy


4 Minute Epoxy


General Purpose Epoxy(Mixer Cups)


Fast Cure Epoxy (Mixer Cups)


Underwater Repair Epoxy


Superior Metal


Steel Putty or Liquid


2000° Putty

Loctite® Fixmaster ® WetSurface Repair Putty


Concrete Repair Epoxy


Metal Magic Steel ™


Stainless Steel Putty


Aluminum Putty or Liquid


Fast Set Steel Putty

High Performance

Steel

Stainless Steel

Aluminum

Fast Setting

General Purpose Metal Repair Specialty Kneadable Sticks

What Type of Application is Needed?



84

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Bel

t R

epai

r &

Ure

than

es

Belt Repair & Urethanes

Loctite® Fixmaster® belt repair products are urethanes designed for durable, tough, flexible repairs ofconveyor belts and other damaged rubber equipment quickly and easily. Loctite® Fixmaster® urethanes aretwo-component, repair materials that can be troweled, cast, or brush-applied to rebuild or protect criticaloperating equipment. Tough, rubber - like properties provide protection from impact, abrasion, and corrosion.Loctite® Fixmaster® urethanes are non-shrinking and unaffected by oil, grease, and water. Use of therecommended accessory products ensures maximum adhesion and product reliability.

BELT REPAIR

LOCTITE® FIXMASTER®

RAPID RUBBER REPAIROur premium quality, belt repairproduct is designed to repairconveyor belts and other damagedrubber equipment quickly andeasily. Repairs will have the samedurability and flexibility as thebelt. The 400 ml cartridge requiresthe use of a Loctite® Rapid RubberRepair Dispenser. The 400 ml kitcontains a 400 ml cartridge,etching agent, cleaner, brushes, and plastic trowels.

LOCTITE® FIXMASTER® FLEX™

CONVEYOR BELT REPAIR KITMakes long lasting belt repairs.Recommended for applicationswhere speed of application is notcritical. Cures in 8 to 12 hours. Kitincludes resin, hardener, cleaner,etching agent, brushes, and plastic trowels.

GENERAL PURPOSE


INSTANT BELT REPAIRA single - component, heat- curingmaterial for fast, temporary beltrepairs. Requires no priming.Equipment can be operated in 30 minutes.

GENERAL RUBBER REPAIR

LOCTITE® FIXMASTER® FLEX 80™ PUTTYA trowelable, two-part urethane for rebuilding and repairing rubberparts and linings, providingimpact-, abrasion- and corrosion-resistant protection.

LOCTITE® FIXMASTER® FLEX 80™ LIQUIDA castable, two-part urethane formaking molds, fixtures, expansionjoints, and non- scratching holding fixtures.


PackageType & Size

COVERAGE COLOR

Flex™ Metal PrimerPromotes adhesion to metal parts

98471 3.3 fl. oz. canApproximately1 can of each

product for 2 lbs. of urethane

Clear

Etching AgentEnhances bonds to rubber

99626 3 fl. oz. bottle Clear

Flex™ CleanerCleans and primes surfaces

39636 4 fl. oz. can N/A Clear

Loctite® Belt Repair Accessories

85

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Belt R

epair &

Urethanes

COVE

RAGE

(IN.2

@ 1

/4"

THIC

KNES

S)

MAX

IMUM

OPE

RATI

NGTE

MPE

RATU

RE (°

F)

ADHE

SIVE

TEN

SILE

STRE

NGTH

(PSI

)

WOR

KING

TIM

E(M

INUT

ES)

HARD

NESS

(SHO

RE A

)

FUNC

TION

AL C

URE

(HOU

RS)

MIX

RAT

IO B

Y VO

LUM

E(R

ESIN

:HAR

DENE

R)

MIX

RAT

IO B

Y W

EIGH

T(R

ESIN

:HAR

DENE

R)

% E

LONG

ATIO

N

AGEN

CYAP

PROV

ALS

Loctite® Fixmaster® Belt Repair& Urethane Properties Chart


PackageType & Size

CONV

EYOR

BELT

REP

AIR

(TEM

PORA

RY)

COAT

ING

IMPE

LLER

S,FE

EDER

BOW

LS

CAST

ING

MOL

DS,

FIXT

URES

,PA

RTS

CONV

EYOR

BE

LT R

EPAI

R(L

ONG

TERM

)

CHUT

ES,

HOPP

ERS,

DEFL

ECTI

ONPL

ATES

REBU

ILDI

NGRU

BBER

PAR

TS

LINI

NG P

UMPS

FORM

ING

EXPA

NSIO

NJO

INTSP R O D U C T

� Preferred Choice � Good Choice

Loctite® Fixmaster® Belt Repair & UrethaneApplication Chart

COLO

R

Fixmaster® Rapid Rubber Repair � � �

Fixmaster® Flex™ Conveyor Belt Repair Kit �

Fixmaster® Instant Belt Repair �

Fixmaster® Flex 80™ Putty � � � �

Fixmaster® Flex 80™ Liquid � � �

Properties based on mixing a 1 lb. unit at 77°F, 7 days cure.

BEL

T R

EPA

IRBE

LT R

EPAI

RAC

CESS

ORIE

SGE

NERA

LRU

BBER

REP

AIR

Fixmaster®

Rapid Rubber Repair966779667596676

400 ml kit400 ml cartridge150 ml coaxial cartridge

Black888833

180 1,300 360 82 1 2 1:1 N/A N/A

Fixmaster® Flex™

Conveyor Belt Repair Kit98693 1 lb. kit Black 94 180 1,500 350 87 10 8 100:40 72:28 N/A

Fixmaster®

Instant Belt Repair37719 1 lb. kit Yellow 115 150 400 650 65 N/A

30min.

N/A N/A N/A

Fixmaster®

Flex 80™ Putty9742397422

1 lb. kit6 lb. kit

Black94564

180 1,500 350 87 10 8 100:40 72:28 ABS

Fixmaster®

Flex 80™ Liquid9741397412

1 lb. kit6 lb. kit

Black27 in.3

162 in.3180 1,800 350 87 20 8 100:13.3 77: 23 N/A

Fixmaster® Rapid RubberRepair Dispenser

39635Required for use with 400 ml cartridge of Loctite® Fixmaster® Rapid Rubber Repair(39635 is not included in the 96677 kit, and must be ordered separately.)

Fixmaster® Rapid RubberRepair Static Mixers

39633 Packaged 6/bag – for mixing and dispensing Loctite® Fixmaster® Rapid Rubber Repair in a 400 ml cartridge.

� Loctite® Fixmaster® Instant BeltRepair is a hot melt adhesiveand requires heat for application.� Loctite® Fixmaster® Flex 80™

Liquid can be used as a flexiblejoint sealant where a black coloris desired.

86

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Mai

nten

ance

&

Rep

air

Ep

oxi

es

Maintenance & Repair Epoxies

EPOXY STICKS


METAL MAGIC STEEL™

Steel epoxy in stick form. Cut off a section, knead, and apply toleaking pipes or damagedequipment. Cures in 10 minutes.NSF 61 approved for potable water applications.


CONCRETE REPAIR EPOXYEnables permanent repairs toconcrete and masonry. Convenientstick contains pre-measuredportions of activator and base. Oncecured, it can be tapped, drilled,screwed, sawed, filed or painted, andwill have an appearance and texturesimilar to concrete.


UNDERWATER REPAIR EPOXYThis putty- like material is ideal for plumbing, irrigation andmarine applications because it isunaffected by chlorinated or saltwater. Will stick to wet surfaces.Ideally suited for underwaterrepairs. Sets in 15 minutes.

POURABLE METAL- FILLED EPOXIESLOCTITE® FIXMASTER® STEEL LIQUIDPourable and self - leveling, steel -filled epoxy. Ideal for castingor making molds. Works well to fillhard-to-reach areas. Can be machinedwhen cured. Sets in 25 minutes.

LOCTITE® FIXMASTER® ALUMINUM LIQUIDSimilar to Loctite® Fixmaster® Steel Liquid, but aluminum filled. Sets in 20 minutes.

TROWELABLE METAL - FILLED EPOXIES

LOCTITE® FIXMASTER® SUPERIOR METALNon-rusting, ferro-silicone -filledepoxy. Extremely high compressivestrength and wear resistance. Idealfor rebuilding worn surfacesexposed to harsh environments.Can be machined, drilled andtapped in 6 to 8 hours. For finalfinish cuts, let the product cure for 24 hours and use carbide tooling. Spreadable putty. Sets in 20 minutes.

LOCTITE® FIXMASTER® STEEL PUTTYNon-slumping, two-part, steel-filledputty. Ideally suited for rebuildingsteel surfaces. Can be machinedwhen cured. Sets in 30 minutes.


ALUMINUM PUTTYSimilar to Loctite® Fixmaster® Steel Putty, but aluminum filled to better match the coefficient ofthermal expansion of aluminum.Sets in 20 minutes.


STAINLESS STEEL PUTTYSimilar to Loctite® Fixmaster® Steel Putty, but stainless steel filledto better match the coefficient ofthermal expansion of stainless steel.Sets in 20 minutes.


FAST SET STEEL PUTTYFaster setting version of the Loctite® Fixmaster® Steel Putty. Sets in 3 minutes.

NEW

87

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Maintenance &

R

epair E

po

xies

GENERAL PURPOSE EPOXIESLOCTITE® FIXMASTER® POXY PAK™

This fast cure, general purpose epoxy bonds virtually any material.It will also fill or seal cracks andrebuild worn surfaces. Comes in a 1 oz. syringe with a built-in plunger for easy dispensing without equipment. Working time is approximately 4 minutes.

LOCTITE® FIXMASTER® 4 MINUTE EPOXYCartridge -based, general purpose, two-part epoxy. Ideal for emergencyrepairs or where fast cure time isrequired. Sets in 5 minutes. Requireshand held dispenser (P/N 98472) andmix nozzle (P/N 98455).

LOCTITE® FIXMASTER® GENERAL PURPOSEEPOXY (MIXER CUPS)Premeasured epoxy mixer cups. Onehour working time. Fills porosityand cracks. Ideally suited forapplications that only require asmall amount of epoxy. Adheres tometal, glass, wood, and hardplastics. Sets in 60 minutes.


FAST CURE EPOXY (MIXER CUPS)Faster setting version of Loctite®Fixmaster® General Purpose Epoxy.Sets in 5 to 15 minutes.

HIGH PERFORMANCELOCTITE® FIXMASTER®

HIGH PERFORMANCE EPOXYFiberglass-reinforced epoxy offeringexceptional shock resistance andoutstanding tensile strength. Idealfor making tough permanent bondson metals, wood, glass, and hardplastics. Comes in a 50 ml cartridge, 1 oz. syringe and a 2 gallon container.The cartridge requires the hand helddispenser (P/N 98472). Cartridgecomes bundled with one mix nozzle.Sets in 30 minutes.


FAST SET STEEL EPOXYCartridge -based, steel - filled epoxy.Makes fast, cost effective repairs.Easy - to -use and easy- to -apply. Idealfor metal parts that must be back inservice quickly. Can be machinedwhen cured. Requires the hand helddispenser (P/N 98472). One mixnozzle comes included with thecartridge. Sets in 3 minutes.


WEAR RESISTANT PUTTYCeramic fibers give this trowelableputty excellent wear and abrasionresistant properties. Cures to asmooth, low friction surface. Forsurfaces exposed to wear, erosion,and cavitation.

SPECIALTY PRODUCTSLOCTITE® FIXMASTER®

WET SURFACE REPAIR PUTTYUse this unique, trowelable epoxy to repair and rebuild wet, evenunderwater surfaces. Bonds to mostmetals, concrete, and some plastics.


2000° PUTTYSingle component putty designed tofill and restore damaged metal andfill cracks in environments thatwill see 2000°F. Water-based andnon- toxic. Typical applicationsinclude header, manifold and cast iron repair.

Loctite® Fixmaster® Superior Metal 6 -Step Process

STEP 1: Clean completely. STEP 2: Gather product. STEP 3: Prepare product. STEP 4: Mix completely. STEP 5: Apply. STEP 6: Set.

� The working time of an epoxy is thetime required for the viscosity todouble. Once the viscosity hasdoubled, epoxies are generally veryhard to work with so jobs should becompleted before this time.

� Increasing the temperature of theproduct or substrate can increase the cure speed of an epoxy.

88

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Mai

nten

ance

&

Rep

air

Ep

oxi

es

POUR

AB

LEEP

OXY

STI

CKS

TRO

WEL

AB

LEAP

PLIC

ATOR

SG

ENER

AL

PUR

POSE

SPEC

IALT

YPR

ODUC

TSH

IGH

PER

FOR

MA

NCE


PackageType & Size

Loctite® Fixmaster® Maintenance & RepairEpoxies Properties Charts

Fixmaster® Poxy Pak ™ § 81120 1 oz. syringe Clear 300 2,300 1 minutes5 to 8

minutes1

ABS,CFIA,NEHC, NAVSEA

Fixmaster®

4 Minute Epoxy § 97434 50 ml cartridge Translucent 160 2,000 3 to 4 minutes 10 minutes 1 N/A

Fixmaster® General PurposeEpoxy § (Mixer Cups)

21427 10 – 0.12 fl. oz. cups Translucent 180 2,000 60 minutes 1.5 hours 24 CFIA

Fixmaster® Fast Cure Epoxy(Mixer Cups) §

214252142639088

10 – 0.12 fl. oz. cups10 – 1 oz. cups4 – 0.12 fl. oz. cups

Grey 180 2,000 5 minutes 10 minutes 12 CFIA

Fixmaster®

High Performance Epoxy §

993939939499392

1 oz. syringe50 ml cartridge2 gallon kit

Tan 180 3,800 30 minutes 8 hours 24 CFIA

Fixmaster®

Fast Set Steel Epoxy*96604 50 ml cartridge Grey 200 2,600 3 minutes

6 to 8minutes

7 CFIA

Fixmaster®

Wear Resistant Putty*9874298743

1 lb. kit3 lb. kit

Grey 225 4,900 30 minutes 1 hour 6ABS,CFIA,

NEHC, NAVSEA

Fixmaster® Wet Surface Repair Putty*

96583 1 lb. kit Grey 150 3,500 30 minutes 1 hour 18ABS, NEHC,

NAVSEA

Fixmaster ® 2000° Putty* 95724 8 oz. can Grey 2000 675 30 minutes 1 hour 7 N/A

Manual Cartridge Applicator 98472Required for use with Loctite® Fixmaster® 50 ml cartridges. (98455 is also required and must be ordered separately.)For more information on spare parts, nozzles and accessories, please visit www.equipment.com.

Static Mix Nozzles 98455Packaged 10/bag – for mixing and dispensing Loctite® Fixmaster® 50 ml cartridgesFor more information on spare parts, nozzles and accessories, please visit www.equipment.com.

TEM

PERA

TURE

RE

SIST

ANCE

(°F)

WOR

KLIF

E

FIXT

URE

TIM

E‡

FULL

CUR

E(H

OURS

)

TENS

ILE

SHEA

RST

RENG

TH (P

SI)

AGEN

CYAP

PROV

ALS

COLO

R(C

URED

)


PackageType & Size CO

MPR

ESSI

VEST

RENG

TH (P

SI)†

WOR

KING

TIM

E

HARD

NESS

(SHO

RE D

)

FUNC

TION

AL C

URE

MIX

RAT

IO

BY V

OLUM

E

MIX

RAT

IO

BY W

EIGH

T

TENS

ILE

SHEA

RST

RENG

TH†

(PSI

)

AGEN

CYAP

PROV

ALS

COLO

R

MAX

IMUM

TEM

PERA

TURE

†(°

F)

COVE

RAGE

(FT.

2@

1 ⁄ 4"

THIC

KNES

S)

Fixmaster®

Metal Magic Steel™*98853 4 oz. stick Grey 7 in.2 250 12,000 2,500 80

3minutes

10minutes

N/A N/A NSF 61

Fixmaster® ConcreteRepair Epoxy § 39366 4 oz. stick Grey 7 in.2 250 12,000 600 80

4 to 7minutes

10minutes

N/A N/A N/A

Fixmaster® UnderwaterRepair Epoxy § 82093 4 oz. stick White 7 in.2 300 12,000 900 70

15minutes

30minutes

N/A N/A CFIA

Fixmaster®

Steel Liquid*9748397484

1 lb. kit4 lb. kit

Grey13 in.352 in.3

225 13,500 6,000 8625

minutes6

hours4:1 9.5:1

ABS,CFIA,NEHC,

NAVSEA

Fixmaster®

Aluminum Liquid*97453 1 lb. kit Aluminum 17 in.3 200 17,000 6,000 85

20minutes

6hours

5:1 9:1ABS,CFIA,

NEHC,NAVSEA

Fixmaster®

Superior Metal*9747340900

1 lb. kit4 kg kit

Dark Grey0.252.2

250 18,000 5,500 9020

minutes6

hours4:1 7.25:1 CFIA

Fixmaster®

Steel Putty*

999139991499912

1 lb. kit4 lb. kit25 lb. kit

Grey0.31.27.5

225 11,100 4,900 8530

minutes6

hours2.5:1 6.25:1

ABS,CFIA,NEHC,

NAVSEA

Fixmaster®

Aluminum Putty*97463 1 lb. kit Aluminum 0.5 200 11,300 4,000 87

20minutes

6 hours

4:1 6.3:1ABS,CFIA,

NEHC,NAVSEA

Fixmaster®

Stainless Steel Putty*97443 1 lb. kit Grey 0.25 225 12,000 4,600 85

20minutes

6 hours

4:1 9:1ABS,CFIA,

NEHC,NAVSEA

Fixmaster®

Fast Set Steel Putty*39917 1 lb. kit Grey 0.4 200 10,800 4,600 80

3minutes

10minutes

1:1 1.8:1ABS,CFIA,

NEHC,NAVSEA

* Properties are based on mixing one lb. mass at 77°F, 7 days cure. § Properties based on ultimate cure. Epoxy properties based on

mixing 20 g mass at 77°F.

† Ultimate cure.‡ Time to reach handling strength. Indicates TOP CHOICE products.

NEW

89

RE

PA

IRIN

G,

RE

BU

ILD

ING

&R

ESTO

RIN

G

Maintenance &

R

epair E

po

xies

POUR

AB

LEEP

OXY

STI

CKS

TRO

WEL

AB

LEG

ENER

AL

PUR

POSE

SPEC

IALT

YPR

ODUC

TSH

IGH

PER

FOR

MA

NCE

P R O D U C T

Loctite® Fixmaster® Maintenance & Repair EpoxiesApplication Chart

Loctite® Fixmaster® Maintenance & Repair EpoxiesBonding Characteristics

Fixmaster® Poxy Pak™ � � � � �

Fixmaster® 4 Minute Epoxy � � � � � � � � �

Fixmaster® General Purpose Epoxy (Mixer Cups) � � � � � �

Fixmaster® Fast Cure Epoxy (Mixer Cups) � � � � � � �

Fixmaster® High Performance Epoxy � � � � � � � � � �

Fixmaster® Fast Set Steel Epoxy � � � � � �

Fixmaster® Wear Resistant Putty � � � � �

Fixmaster® Wet Surface Repair Putty � � �

Fixmaster® 2000° Putty � � � �

P R O D U C T

REPA

IRIN

GTH

READ

ED P

ARTS

FIXT

URES

AND

PROT

OTYP

ES

REPA

IRIN

G EN

GINE

BLOC

KS

PUM

P RE

PAIR

REPA

IRIN

G ST

AINL

ESS

STEE

L PA

RTS

REBU

ILDI

NGIM

PELL

ERS

AND

VALV

ES

REPA

IRIN

GAL

UMIN

UM P

ARTS

FORM

ING

MOL

DSAN

D FI

XTUR

ES

REST

ORIN

GTU

BE S

HEET

S

WET

SUR

FACE

REPA

IRS

EMER

GENC

YM

ETAL

REP

AIRS

REBU

ILDI

NGSH

AFTS

,KEY

WAY

SAN

D BE

ARIN

GS

CORR

OSIO

NPR

OTEC

TION

REPA

IRIN

G PI

PES

AND

TANK

S

SHOC

KRE

SIST

ANT

MET

ALBO

NDIN

G

RUBB

ERBO

NDIN

G

PLAS

TIC

BOND

ING

SAND

ABLE

FIN

ISH

PRIN

TABL

E FI

NISH

WAT

ERRE

SIST

ANT

GAP

FILL

ING

TOUG

HENE

DFO

RMUL

ATIO

N

FAST

CUR

ETI

ME

FERR

OUS

MET

AL R

EPAI

R

Fixmaster® Metal Magic Steel™ � � � � �

Fixmaster® Concrete Repair Epoxy � � �

Fixmaster® Underwater Repair Epoxy � � �

Fixmaster® Steel Liquid � � � �

Fixmaster® Aluminum Liquid � � � �

Fixmaster® Superior Metal � � � � � � �

Fixmaster® Steel Putty � � � �

Fixmaster® Aluminum Putty � � � �

Fixmaster® Stainless Steel Putty � � � �

Fixmaster® Fast Set Steel Putty � � �


90

Retaining

Choosing a retaining compound

Retaining compounds are typically used to join non-threaded cylindrical assemblies made of some sort ofmetal. Metals can be designated as active or inactive.Active metals (carbon steel, copper, or bronze) willtypically corrode faster than inactive metals (stainlesssteel, plated parts, or anodized aluminum). Whenworking with inactive metals, it is generallyrecommended that a primer be used to increase thecure speed of the retaining compound.

New Loctite® retaining compounds have historically beenformulated as liquids due to their reactivity, and toensure they remain stable and ready to use. Recentbreakthroughs have led to the development of stable, asemi-solid stick formulation. This has opened the door toapplications where the liquids were considered too messyor inconvenient. This new semi-solid formulation allowsdirect contact of the compound to the part, and ensuresnot only that the product is placed exactly where it isneeded, but that it also stays there as the cylindricalassembly is positioned and assembled.

The following are ºkey factors to consider whenchoosing a retaining compound.

1. Gap Size Between Parts – Typically, low viscosityretaining compounds (125 to 2000 cps) are used forgaps up to 0.010". For gaps greater than 0.010",retaining compounds with higher viscosities (> 2000 cps) should be used.

2. Temperature Resistance – Most Loctite® retainingcompounds are made to withstand temperatures up to 300°F. For those applications that requireresistance greater than 300°F, Henkel offers a line of high temperature resistant Loctite® retainingcompounds that can withstand temperatures up to 450°F.

3. Bond Strength – In applications that require apermanent bond, a high -strength retainingcompound is recommended. If at some point in thefuture, parts will need to be taken apart for service, itis better to use a low or medium strength product.

4. Cure Speed – Many production applications requireretaining compounds with fast cure speed in order tomaximize production rate. On the other hand, someapplications require a slower cure so that adjustmentscan be made after the parts have been assembled. Ourrange of Loctite® retaining compounds offers varyingrates of cure enabling you to choose the one that bestmatches your application.

This chart should not be used to specify products without specific testing. It is recommended that you conduct on-parttesting to ensure product performance before specifying anyretaining compounds.


Retaining Compounds Selector Guide

91

RE

TA

ININ

GS

elector G

uide

Loctite® 620™

Retaining Compound

Loctite® 603™

Retaining Compound

Loctite® 609™

Retaining Compound

Loctite® 648™

Retaining Compound

Loctite® 675™

Retaining Compound

YES

NO

MEDIUM STRENGTH

HIGH STRENGTH

HIGH STRENGTH

5 MINUTE FIXTURE

20 MINUTE FIXTURE

Loctite® 641™

Retaining Compound

Loctite® 638™

Retaining Compound

Loctite® 680™

Retaining Compound

MEDIUM STRENGTH

Loctite® 232™

Retaining Compound

LOW STRENGTH

HIGH STRENGTH

HIGH STRENGTH

5 MINUTE FIXTURE

10 MINUTE FIXTURE

Loctite® 635™

Retaining Compound

HIGH STRENGTH

1 HOUR FIXTURE

300°F Maximum Temperature

Oil Contamination

Temperatures above 300°F


Loose-Fitting Parts Between0.010" to 0.015" Gap

Loctite® 660™ Quick Metal®

Retaining Compound

Worn Parts Up to 0.020" Gap

What Type of Parts are being Assembled?

Loctite® 640™

Retaining Compound


Loctite® QuickStix™ 668™

Retaining Compound


Close-Fitting Parts Up to 0.010" Gap


CLOSE-FITTING PARTSLOCTITE® 232™ RETAINING COMPOUNDHeavy Press Fit/Medium StrengthA medium viscosity, mediumstrength retaining compound with a slow cure and lubricity for highlytorqued threaded assemblies andheavy press fits.

LOCTITE® 603™ RETAINING COMPOUNDPress Fit / Oil TolerantA retaining compound tolerant of oiland other contamination. Seals andsecures cylindrical assemblies up to0.005" diametral clearance. Fixturesin 10 minutes. Prevents fretting andcorrosion of metal assemblies.

LOCTITE® 609™ RETAININGCOMPOUNDPress Fit/General PurposeA low viscosity retainingcompound that bonds rigid metal assemblies. Ideal for gapdistances up to 0.005" diametral.Fixtures in 10 minutes andprovides a shear strength of 3,000 psi after 24 hours. Easilyjoins dissimilar metals. Withstands temperatures to 300°F.

LOCTITE® 648™ RETAINING COMPOUNDPress Fit /High Strength/Rapid CureA retaining compoundrecommended for continuousworking temperatures up to 300°F.Fills gaps up to 0.006" diametralclearance. Fixtures in 5 minutes.

GENERAL PURPOSELOCTITE® QUICKSTIX™ 668™

RETAINING COMPOUNDA high temperature retainingcompound in a revolutionary semi-solid formula. Patented, no-mess package offers addedconvenience and portability. Ideal for gaps up to 0.005" on thediameter. Withstands temperaturesto 400°F (204°C).

HIGH TEMPERATURE

LOCTITE® 620™ RETAININGCOMPOUNDSlip Fit / High Temperature A high temperature (450°F), high viscosity liquid retainingcompound. Provides a shear strength of over 3,800 psi on steel.Locks and secures metal cylindricalassemblies up to 0.015" diametralclearance. Prevents metal frettingand corrosion. Seals against leakage.

92

RE

TA

ININ

G

Henkel Corporation has applied their pioneered anaerobic technology to develop retaining compounds thatincrease the shear strength of cylindrical, non-threaded assemblies. Marketed under the brand name Loctite®,these compounds have gained wide acceptance as a standard method for assembling press and slip - fitted parts.Loctite® retaining compounds fill the “inner space” between components and cure to form a strong precisionassembly. Formulated in a variety of viscosities, gap fills, flexibility, and strength characteristics, Loctite®retaining compounds can be applied with automated process equipment or dispensed manually.

Retaining

NEW

93

RE

TA

ININ

G

LOOSE-FITTING PARTSLOCTITE® 635™ RETAINING COMPOUNDSlip Fit / High Strength/ Slow CureA high viscosity, high strengthretaining compound with slow cure speed to permit readjustmentof parts during assembly.

LOCTITE® 638™ RETAININGCOMPOUNDSlip Fit /Maximum StrengthA maximum strength retainingcompound for use where highdynamic force or cyclic loading is expected. Locks cylindricalassemblies up to 0.010" diametralclearance. Fixtures in 5 minutes.

LOCTITE® 680™ RETAINING COMPOUNDSlip Fit / High StrengthA high strength, high viscosity roomtemperature -curing adhesiveused to join fitted cylindrical parts. It fixtures in 10 minutes andprovides a shear strength of 4,000psi after 24 hours. Capable of filling diametral gaps up to 0.015"(0.27 mm). Loctite® 680™ allowsrelaxed machining tolerances andreplaces clamp rings, set screws,and snap rings.

MEDIUM STRENGTHLOCTITE® 641™ RETAINING COMPOUNDPress & Slip Fit / Controlled StrengthA controlled strength retainingcompound that is ideal forcylindrical parts that requiredisassembly. Recommended formaximum diametral clearance of0.008". Fixtures in 20 minutes.

MACHINERY REPAIRLOCTITE® 660™ QUICK METAL®

RETAINING COMPOUNDPress Fit RepairA creamy, non-running gel that isapplied onto cylindrical parts to fillsurface imperfections and repairworn areas. It contains no metal, but once assembled hardens to astrength that often doubles that of a press fit. Use Loctite® 660™ tosalvage worn metallic parts, or tokeep machinery running until newparts arrive. Use to 300°F (149°C).

� Clean parts with Loctite®

ODC-Free Cleaner & Degreaser before applying the adhesive.

� If the threadlocker will be applied below 40°F, pre-treat with Loctite® 7649™ Primer N™.

� If the parts were in contact with aqueous washing solutions or cutting fluids which leave a protective layer on the surface,wash with hot water before use.

94

RE

TA

ININ

G

CLO

SE-F

ITTI

NG

PA

RTS

LOO

SE-F

ITTI

NG

PA

RTS

GEN

ERA

LPU

RPO

SEM

ACHI

NERY

REPA

IRM

EDIU

MST

RENG

THH

IGH

TEM

PER

ATUR

E

Loctite® Retaining CompoundsProperties Chart


Package Type & Size TE

MPE

RATU

RERA

NGE

CURE

SPE

ED*

SPEC

IFIC

GRA

VITY

RECO

MM

ENDE

DPR

IMER

TYPI

CAL

USE

COLO

R

MAX

IMUM

GAP

FILL

(DIA

MET

ER)

AGEN

CYAP

PROV

ALS

VISC

OSIT

Y (c

P)

SHEA

R ST

RENG

THST

EEL/

STEE

L* (P

SI)

* Varies with substrates. ** For new designs. Indicates worldwide availability. Indicates TOP CHOICE products.

232™1860727863

1 liter bottle250 ml bottle

Medium strength for heavy press fits

Brown 0.015" 5,0001,350 psi*(2 hr. heat

cure)

-65°F to300°F

Fixture – >1 hourFull – 24 hours

N™ or T™ 1.02 N/A

603™ 214402144121442

10 ml bottle50 ml bottle250 ml bottle

For close-fittingparts with lightcontamination

Green 0.005" 125 3,770-65°F to300°F

Fixture – 10 minutes

Full – 24 hours

N™ or T™ 1.10 N/A

609™ 6090560921609316094160943

0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle

1st generation to augment press fits

Green 0.005" 1252,300(min.)

-65°F to300°F


Full – 24 hours

N™ or T™ 1.10

MIL-R-46082Bfor existing

designs, ASTMD-5363**, CFIA

648™214432144421445


Fast fixturing forclose-fitting parts,high strength forstainless steel

Green 0.006" 500 3,900-65°F to350°F


Full – 24 hours

N™ or T™ 1.13 N/A

675™

67541 250 ml bottle 1st generation forclose-fitting parts

Green 0.005" 125 3,000-65°F to300°F


Full – 24 hours

N™ or T™ 1.09

MIL-R-46082B forexisting designs,ASTM D-5363**

QuickStix™

668™391473914839149


General purpose,high temperature

GreenStick

0.005" Semi-solid 3,800-65°F to400°F


Full – 24 hours

N™ or T™ 1.1228 N/A

620™ 6200562015620406207062085


For hightemperatureapplications

Green 0.015" 8,500 3,800-65°F

to450°F


Full – 24 hours

N™ or T™ 1.16 CFIA, ABS

640™

6403164041

50 ml bottle250 ml bottle

For hightemperatureapplications

Green 0.007" 600 3,000-65°F

to400°F

Fixture – 1 hourFull – 24 hours

N™ or T™ 1.12


635™

6353163541


1st generation high strength

for slip fitsGreen 0.010" 2,000 4,500

-65°F to300°F

Fixture – 1 hourFull – 24 hours

N™ or T™ 1.05


638™ 214472144821449


High strength forloose-fitting parts

Green 0.015" 2,500 4,500-65°F to300°F


Full – 24 hours

N™ or T™ 1.09 CFIA

680™ 6800568015680356806068090


High strength forslip-fitted parts

Green 0.015" 1,250 2,800-65°F to300°F


Full – 24 hours

N™ or T™ 1.11

NSF/ANSI 61,ABS

641™

2880221458


Medium strength for easier

disassemblyYellow 0.008"

525/1,950Thixotropic

1,700-65°F

to300°F


Full – 24 hours


660™ Quick Metal® 66010

6604030287

6 ml tube50 ml tube250 ml tube

For repair of wornmachinery parts

Silver 0.020"250,000/1,500,000Thixotropic

3,335-65°F

to300°F


Full – 24 hours


NEW

Loctite® Integrated Semi-Automatic Controller combines acontroller and reservoir into a single unit. Combined with thedigital timing feature, this unit will provide precise dispensing control with any Loctite® automatic dispense valve or pneumatic hand held applicator, sold separately. The reservoir is large enough to accept up to 2 kg bottles, and units can be equipped with low level sensing as shown in the chart below.

For available spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

RE

TA

ININ

G

95

Loctite® 50 ml and 250 ml HandPumps are portable, precision,bottle - top applicators that threaddirectly onto any 50 ml or 250 mlanaerobic bottle. They are designedto dispense at any angle from 0.01 to0.04 ml with viscosities up to 30,000cP, without leaks or product waste.


Item Numbers: 97001 (250 ml bottles),98414 (50 ml bottles)

DISPENSING OPTIONS Loctite® Shot Miser™ Dispense System is designed for both manualand timed dispensing of all single component products withviscosities ranging from 0 to 80,000 cP. All wetted components areinexpensive and disposable, resulting in low maintenance costsand minimal downtime. This is a complete dispense system whichincludes a reservoir, controller, and dispense valve. The reservoir will directly accept 250 ml and 1 pound product bottles (but not 1 liter containers).


Item Number: 98116Electrical Power: 120 VAC; 50/60 HzPackage Types and Size:250 ml and 1 lb. bottles

Loctite® Bond-A-Matic® 3000 Dispenser is a reliable, low costpneumatic dispenser that arrives ready to dispense Loctite®retaining compounds. This system comes complete with 2 literpressure reservoir and Loctite® Vari - Drop™ applicator. The pressure regulator can be chosen to best suit your application. The reservoir will accommodate 50 ml, 250 ml, and 1 liter package sizes.


Item Numbers: 982719 and 982722Weight: 18 lbs.Package Types and Size:250 ml and 1 lb. bottles

Item Numbers 97010 97020 97007 97017

Pressure Regulation 0 to 15 psi 0 to 100 psi

Used to Dispense Retaining Compounds

Package Types and Sizes 250 ml and 1 L bottles

Viscosity Range Low to Medium Medium to High

Low Level Sensing No Yes No Yes

96

Surface Preparation

Henkel a complete line of Loctite® surface preparationaccelerators, activators and primers as well as acomplete line of general -purpose Loctite® brandedcleaners and degreasers, and specialized products toensure the maximum performance of Loctite® adhesivesand sealants.

Loctite® accelerators are used to increase the cure speedand gap -filling capabilities of cyanoacrylate adhesives.Activators are specially- engineered curing agents forstructural adhesives. Loctite® primers are used to ensurecure on inactive surfaces and speed the cure ofmachinery adhesives.

Loctite® cleaners and degreasers are highly effective and are available in both aqueous and solvent-basedformulations. When choosing a cleaner or degreaser, the major factors to consider are dry time, residue, odor,and substrate compatibility. Residue is a particularlyimportant concern because if there is any secondaryprocessing of the part, e.g. painting or bonding, a residuecould interfere with that process. Substrate compatibilityis commonly a concern when dealing with plastics andsolvent-based cleaners. The following chart will help youto select the appropriate cleaner for your application.

This chart should not be used to specify products without specifictesting. It is recommended that you conduct on-part testing toensure product performance before specifying a certain type ofsurface preparation product.


Selecto

r Guid

eSU

RFA

CE

PR

EPA

RATIO

N

97

Surface Preparation Selector Guide

Loctite®

Natural Blue ®

Biodegradable Cleaner & Degreaser

Loctite®

Aqua Power ®

Biodegradable Cleaner & Degreaser

Loctite®

Non-ChlorinatedParts Cleaner

Loctite®

Pro Strength Parts Cleaner

Loctite®

Non-FlammableElectrical Contact

Cleaner

Loctite® Chisel ®

Gasket Remover(Methylene Chloride)

Loctite® Chisel ®

MC-Free GasketRemover

Loctite®

CyanoacrylateClean-Up Solvent

Loctite®

Electrical Contact &Parts Cleaner

Loctite®

Pro StrengthDegreaser

Loctite®

OCD-FreeBiodegradable

Cleaner &Degreaser (Naphtha)

Loctite® Electrical Contact Cleaner

Loctite®

Multi-PurposeGlass Cleaner

Loctite® IndustrialHand Wipes

Biodegradable

Solvent-Based

Electrical CleanerDegreaser Parts Cleaner Gasket/Remover

StrippersHand Wipes/Glass Cleaner

What Type of Cleaner is Needed?


Use a primer when both surfaces are considered inactive. It is necessary to apply theprimer to one surface, in most cases, unless gaps are excessive.

98

SU

RFA

CE

PR

EPA

RATIO

NA

ccel

erat

ors

,A

ctiv

ato

rs &

Pri

mer

s

Accelerators, Activators & Primers

Henkel Corporation offers a complete line of Loctite® surface preparation products to ensure themaximum performance of Loctite® adhesives and sealants. Accelerators are used to increase the cure speedand gap-filling capabilities of cyanoacrylate adhesives. Activators are specially -engineered curing agentsfor structural adhesives. Primers are used to ensure cure on inactive surfaces and speed the cure ofmachinery adhesives. All Loctite® surface preparation products are available in ozone - safe (non-chlorofluorocarbons), solvent -based and solventless formulations.

ACCELERATORSLOCTITE® 7113™ ACCELERATORThis accelerator features long on-part life. Use with Loctite® cyanoacrylate adhesives.

LOCTITE® 7452™ TAK PAK® ACCELERATORThis accelerator, with aggressivecleaning properties, promotes thecure speed of all Loctite®cyanoacrylate adhesives.

ACTIVATORSLOCTITE® 7075™ ACTIVATORAn acetone-based activator thatpromotes the proper cure of Loctite®324™ and 325™ Speedbonder™Structural Adhesives.

LOCTITE® 7380™ DEPEND® ACTIVATORThis solvent - free activator allowsimmediate mating of parts. Use with most Loctite® acrylic adhesives.

LOCTITE® 7387™ DEPEND® ACTIVATORThis activator promotes the cure ofmost Loctite® acrylic adhesives. Thisis a flammable product.

PRIMERSLOCTITE® 770™ PRISM® PRIMERAn adhesion promoter formulatedfor use with polyolefins and other low surface energy plasticmaterials. Use with Loctite®cyanoacrylate adhesives. Fast dry time and long on -part life.

LOCTITE® 7471™ PRIMER T™

A solvent-based primer that speedsthe cure of all Loctite® anaerobicadhesives and ensures proper cureon inactive metals.

LOCTITE® 7649™ PRIMER N™

A solvent-based primer that featuresvery long on-part life. Use to speedthe cure of all Loctite® anaerobicproducts and ensure proper cure oninactive metals. Ideal for cureconditions below room temperature.

LOCTITE® 7951™ PRISM® PRIMERA non-flammable and non-combustible adhesion promoterformulated for use with polyolefinsand other low surface energy plasticmaterials. Use with Loctite®cyanoacrylate adhesives. Fast drytime and long on-part life.

SU

RFA

CE

PR

EPA

RATIO

N

99

Accelerato

rs,A

ctivators &

Prim

ers

ACC

ELER

ATO

RS

ACT

IVAT

OR

SPR

IMER

S

Loctite® Accelerators, Activators &Primers Properties Chart


Package Type & Size

ON-P

ART

LIFE

DRY

TIM

E

APPL

ICAT

ION

COLO

R

AGEN

CYAP

PROV

ALS

VISC

OSIT

Y (c

P)

BASE

712™

Tak Pak®

203521863618390

1.75 fl. oz. bottle0.7 fl. oz. metered mist1 gallon can

Clear/Amber 1 Isopropanol 1 min.<30

secondsAll

cyanoacrylatesMIL-46050C for

existing designs, CFIA

7109™

Tak Pak® II2244023034

1.75 fl. oz. bottle1 qt. bottle

Clear/Amber 3 Perfluorocarbon 1 min.<5

secondsAll

cyanoacrylatesN/A

7113™1960519606

1.75 fl. oz. bottle1 gallon can

Clear 0.4 Heptane 24 hrs. 1 minuteAll

cyanoacrylatesN/A

7452™

Tak Pak®

1849018580186371857518576

1.75 fl. oz. brush-cap bottle1.75 fl. oz. spray-cap bottle0.7 fl. oz. metered mist1 quart can1 gallon can

Clear/Amber 0.4 Acetone 1 min.<30

secondsAll

cyanoacrylatesMIL-46050C for existing designs

7075™ 2134922671

1 quart can4.5 oz. net wt. aerosol can

Amber 2 Acetone 2 hrs. 3 minutes324™ or

325™ N/A

7380™

Depend®

198221982419907

1 liter can1.75 fl. oz. bottle1 gallon

Light Brown 43 Monomer 2 hrs. None Structurals N/A

7387™

Depend®

188611886221088

1.75 fl. oz. bottle1 quart can4.5 oz. net wt. aerosol can

Light Brown 1.5Heptane/

Isopropanol2 hrs. None Structurals N/A

2506225062 1 liter bottle

Thin Green/Fluorescent

1.03 Methacrylate 1 hr. NoneAnaerobics

on dichromatesurfaces

N/A

770™

Prism®1839618397

1.75 fl. oz. bottle16 fl. oz. can

Colorless 1.25 Heptane 8 hrs.30

secondsAll

cyanoacrylatesCFIA

793™

Prism®1865020246

1.75 fl. oz. bottle16 fl. oz. bottle

Clear/Light Amber

3Propylene-based

Glycol Ether/Water<2 hrs.

<10minutes

Allcyanoacrylates

N/A

7090™ 1936812695

1 fl. oz. bottle1 liter bottle

Light Amber 3 No solvent 1 hr.<10

minutesAnaerobics N/A

7471™

Primer T™192672247719268

1.75 fl. oz. bottle4.5 oz. net wt. aerosol can1 gallon can

Amber 2 Acetone/Isopropanol 7 days30 to 70seconds

AnaerobicsMIL-S-22473E for

existing designs, ASTMD-5363 for new designs

7649™

Primer N™

1926938402213472134819266

1.75 fl. oz. glass bottle1.75 fl. oz. aluminum bottle25 g net wt. aerosol can4.5 oz. net wt. aerosol can1 gallon can

Clear/Green 2 Acetone 30 days30 to 70seconds

Anaerobics

MIL-S-22473E forexisting designs, ASTM

D-5363 for new designs,NSF/ANSI 61,NSF P1, CFIA

7951™ Prism®27858 1.75 fl. oz. bottle

Colorless,Slightly Hazy

1Perfluorocarbon and

Chlorobenzotrifluoride8 hr.

< 30 seconds

Allcyanoacrylates

N/A


100

Cle

aner

s &

Deg

reas

ers

SU

RFA

CE

PR

EPA

RATIO

N

Cleaners & Degreasers

DEGREASERS

LOCTITE® NATURAL BLUE®

BIODEGRADABLE CLEANER & DEGREASERAll purpose, industrial strength,concentrated cleaner anddegreaser. Can be economicallydiluted with water. Natural Blue®is formulated for wipe down,pressure spraying, and immersioncleaning processes – at roomtemperature or heated. Pine-scented, non- flammable, and non-toxic. Contains no ozone-depleting chemicals (ODCs). CFIA approved.

DEGREASERSLOCTITE® NATURAL BLUE® BIODEGRADABLECLEANER & DEGREASERFragrance -FreeSame product as Loctite® NaturalBlue® Biodegradable Cleaner & Degreaser but without thefragrance. It can be used in alldepartments of a food processingplant. Contains no ozone-depletingchemicals (ODCs). CFIA approved.

LOCTITE® AQUA POWER®

BIODEGRADABLE CLEANER & DEGREASERPenetrates, dissolves and removesdirt and oil. Fast drying and residue - free. Environmentallyfriendly product is biodegradable,has low toxicity, contains no ozone- depleting chemicals (ODCs),and is non-corrosive/non-caustic.

LOCTITE® ODC-FREE CLEANER& DEGREASER (NAPHTHA)A non-aqueous, hydrocarbon-basedsolvent designed for cleaning anddegreasing surfaces to be bondedwith adhesives, as well as for generalpurpose industrial cleaning. Safe on aluminum, rubber and mostplastics, and will not cause flashrusting on water sensitive parts.Dries residue - free. Contains noozone-depleting compounds.(Formerly referenced as 7070.) NSF K1 approved.

LOCTITE® PRO STRENGTH DEGREASERQuickly dissolves and removesgrease, oil, and dirt from iron, steel, aluminum, magnesium,copper, rubber, plastic, and concrete. Rinses off with water.

� The Loctite® line of cleanersand degreasers include bothaqueous and solvent-basedproducts, all of which are freeof Class I ozone-depletingchemicals (ODCs).� Loctite® MC-Free Chisel®

Gasket Remover is the bestproduct for removingsilicones.

101

SU

RFA

CE

PR

EPA

RATIO

NC

leaners &D

egreasers

ELECTRICAL CLEANERSLOCTITE® ELECTRICAL CONTACT& PARTS CLEANERFast-evaporating cleaner removesgrease, oil, and other contaminantsfrom electrical parts and mechanicalequipment. Contains no CFCs orHCFCs and is safe on most plastics.Non- conductive, non-corrosive.

LOCTITE® ELECTRICALCONTACT CLEANERNon-FlammableRemoves grease, oil, and othercontaminants from electrical parts to prevent contact failure. Dries residue -free in seconds. Non-conductive, non- corrosive, non-flammable. Contains no CFCs or Class I ozone-depleting chemicals(ODCs). Contains HCFC-141b. Mayattack some sensitive plastics.

LOCTITE® NON-FLAMMABLEELECTRICAL CONTACT CLEANERUse as an electrical contact cleaner to remove grease, dirt, oil, and other surfacecontaminants from sensitiveelectrical /electronic parts. Non-flammable, fast evaporatingand leaves no residue. Contains no HCFCs or CFCs.

GASKET REMOVERS

LOCTITE® CHISEL® GASKET REMOVER(METHYLENE CHLORIDE)Removes gaskets from any type of assembly in 10 to 15 minutes.Prepares metal parts for newgaskets, eliminating scraping andsanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers.CFIA approved.

GLASS CLEANER/HAND WIPES

LOCTITE® CHISEL® MC-FREEGASKET REMOVERFree of Methylene Chloride,Loctite® Chisel® MC-Free GasketRemover has a foaming action thatlifts off gaskets from any type ofassembly in minutes. Performsbetter than Methylene Chlorideformulations on silicone gasketsand removes most spray paintsfrom steel panels in less than 30seconds. Convenient spray liquidpenetrates and cleans intricateshapes and will not run off, evenon vertical surfaces. Suitable forwood and plaster. Not for use on plastics, linoleum, or synthetic fibers.

GLASS CLEANER/HAND WIPESLOCTITE® MULTI-PURPOSEGLASS CLEANERFast-acting, professional strengthcleaner removes tough grease anddirt from glass, chrome, aluminum,stainless steel, and enamel finishes.Orange-scented formula will not run or streak. Contains no ozone-depleting chemicals (ODCs).

LOCTITE® INDUSTRIAL HAND WIPESPre -moistened with a powerfulcitrus -scented cleaning formulathat is abrasive enough to scrub off the toughest grease and grime. Quick and easy - to -use,these 9.5" x 12" towels eliminaterinsing and drying and leave noresidue behind. Perfect forindustrial and commercialenvironments in the painting,printing, maintenance,transportation, and constructionindustries.

PARTS CLEANERSLOCTITE® NON-CHLORINATEDPARTS CLEANERPenetrates, dissolves, and removes dirt and oil from metalparts. Leaves no residue. Does notcontain 1,1,1-trichlorethane; helpsmanage EPA halide limits.

LOCTITE® PRO STRENGTHPARTS CLEANERAggressively penetrates, dissolves, and removes oil andgrease from parts. Dries quicklywith no residue. Contains noozone-depleting chemicals (ODCs).

LOCTITE® 768™ X-NMS CLEAN-UP SOLVENTQuickly and safely dissolves curedcyanoacrylate -based adhesives.

STRIPPER / VARNISH REMOVERSLOCTITE® PRO STRENGTHVARNISH REMOVERSuper jet spray quickly cuts andremoves grease, gum, and varnishfrom chokes, baffle plates, andcarburetor linkage. Improvesperformance and fuel efficiency.

LOCTITE® INDUSTRIAL STRENGTHPAINT STRIPPERQuickly strips and removes paint.Eliminates sanding and scraping.Works in 10 to 15 minutes attemperatures from -40°F to 100°F.Contains no ozone-depletingchemicals (ODCs).

NEW

102

SU

RFA

CE

PR

EPA

RATIO

NC

lean

ers

&D

egre

aser

s

DEG

REA

SER

SPA

RTS

CLEA

NERS

ELEC

TRIC

AL

CLEA

NER

SG

ASK

ETR

EMO

VER

S

STRI

PPER

/VA

RNIS

HRE

MOV

ERS

GLAS

SCL

EANE

R/HA

ND W

IPES

Loctite® Cleaners & Degreasers Properties Chart

P R O D U C T Item Number

Package Type & Size DRYING TIME RESIDUE /RINSABILITY

ODOR

Natural Blue® BiodegradableCleaner & Degreaser

822448224982251822538225482255

4 fl. oz. bottle24 fl. oz. spray bottle1 gallon bottle 5 gallon pail15 gallon pail55 gallon drum

Equivalent to theevaporation rate of water.

Wiping or blowers willaccelerate dry time.

Rinses residue-free with water

Pine Scent

Natural Blue® Biodegradable Cleaner& Degreaser (Fragrance-Free) 23811

202791 gallon bottle55 gallon drum

Equivalent to the evaporation rate of water.


Rinses residue-free with water

Fragrance-Free

Aqua Power® Biodegradable Cleaner & Degreaser

30565 17 oz. net wt. aerosol 5 to 15 minutes No rinse and no residue Mild Citrus

ODC-Free Cleaner & Degreaser 223552016220260

15 oz. net wt. aerosol16 fl. oz. pump spray1 gallon can

Equivalent to the evaporation rate of water.


No rinse and no residue Mild Citrus

Pro Strength Degreaser 30521 15 oz. net wt. aerosolLeave on surface for

10 minutesRinses clean Mild Solvent

Electrical Contact & Parts Cleaner 25791 11 oz. net wt. aerosol < 30 seconds No rinse and no residue Mild Solvent

Electrical Contact Cleaner 24379 15 oz. net wt. aerosol < 30 seconds No rinse and no residue Mild Solvent

Non-Flammable Electrical Contact Cleaner

36646 14 oz. net wt. aerosol < 30 seconds No rinse and no residue Solvent

Chisel® Gasket Remover (Methylene Chloride)

79040 18 oz. net wt. aerosolLeave on surface for

5 to 10 minutes.Wipe/scrape clean.

Waxy residue Solvent

Chisel® MC-FreeGasket Remover

34663 15.25 oz. net wt. aerosolLeave on surface for

5 to 10 minutes.Wipe/scrape clean.

Oily residue Solvent

Multi-Purpose Glass Cleaner 30546 18.75 oz. net wt. aerosol Wipes dry No residue, wipes clean Orange Scent

Industrial Hand Wipes 3494334944

75 count canister130 count bucket

1 to 5 minutes No rinse and no residue Mild Citrus

Non-Chlorinated Parts Cleaner 30545 14.75 oz. net wt. aerosol 5 to 15 minutes No rinse and no residue Mild Solvent

Pro Strength Parts Cleaner 30548 19 oz. net wt. aerosol 5 to 15 minutes No rinse and no residue Mild Solvent

768™ X-NMS Clean-Up Solvent 7682076871

1.75 fl. oz. bottle1 gallon can

< 30 seconds No rinse and no residue Solvent

Pro Strength Varnish Remover 30529 12 oz. net wt. aerosol 5 minutes No rinse and no residue Aromatic

Industrial Strength Paint Stripper 81716 18 oz. net wt. aerosol 10 minutesRinses residue-free

with waterAcrid


NEW

103

SU

RFA

CE

PR

EPA

RATIO

NC

leaners &D

egreasers

Loctite® Cleaners Application Chart

P R O D U C T Function Application

DEG

REA

SER

SPA

RTS

CLEA

NERS

ELEC

TRIC

AL

CLEA

NER

SG

ASK

ETR

EMO

VER

S

STRI

PPER

/VA

RNIS

HRE

MOV

ERS

GLAS

SCL

EANE

R/

HAND

WIP

ES

Natural Blue® Biodegradable Cleaner & Degreaser

Removes grease, grime, oil, soot, cutting fluids,mildew, stains, light carbon, animal fat, polishing

compounds, and ink.

Cleans engine parts, ovens, exhaust hoods, drilling rigs.Can be diluted for general wipe down cleaning.

Formulated for pressure spraying and immersion cleaning processes, at room temperature or heated.

Natural Blue® Biodegradable Cleaner & Degreaser(Fragrance-Free)

Removes grease, grime, oil, soot, cutting fluids,mildew, stains, light carbon, animal fat, polishing compounds, and ink, without added fragrance.

Exhaust hoods, machinery, tanks, motors, concrete floors,asphalt, walls, floors, carpets, valves, equipment, vehicles,

compressors, exterior siding, engines, bearings.

Aqua Power ® Biodegradable Cleaner & Degreaser

Biodegradable cleaner for removing oil,grease, and asphalt.

All-purpose metal parts cleaner.

ODC-Free Cleaner & DegreaserRemoves grease, oil, lubrication fluids, metal cuttings and filings from parts, equipment,

and machinery.

Use as a spray or in immersion cleaning processes, at roomtemperature or heated. Recommended as a final pre-assembly

cleaning treatment for all surfaces bonded with adhesives.

Pro Strength DegreaserSelf-emulsifying degreaser that quickly cuts andremoves grease, oil, and dirt, as well as inhibiting

rust and corrosion.

Cleaning and degreasing industrial and farm equipment,lawn mowers, garage floors, tools.

Electrical Contact & Parts Cleaner

Removes grease, dirt, oil, flux, and surface contaminants from sensitive electrical/electronic devices.Also used for equipment requiring non-conductive, low

residue degreasing agents.

Switches, relays, motor controls, pc boards, connectors, tapeheads, sensors, control panels, electrically driven equipment,

general parts degreasing.

Electrical Contact Cleaner

Removes grease, dirt, oil, flux, and surface contaminantsfrom sensitive electrical/electronic devices. Also used for

equipment requiring non-conductive, low residue degreasingagents. Contains HCFC-141b. Non-flammable.

Switches, relays, motor controls, pc boards, connectors, tapeheads, sensors, control panels, electrically driven equipment.

Non-Flammable ElectricalContact Cleaner

Removes grease, dirt, oil, and flux from sensitiveelectrical/electronic devices.

Cleans motorized instruments, control panels, electrically drivenequipment, motors, and other electronic devices.

Chisel® Gasket Remover (Methylene Chloride)

Removes pre-cut conventional gasket cements as well as formed-in-place chemical gaskets.

Removing silicones, baked-on gaskets, gaskets from aluminumand small, difficult-to-reach components, weatherstrip

adhesive, dried oil, grease, paint, varnish.

Chisel® MC-FreeGasket Remover

Removes pre-cut conventional gasket cements as well as formed-in-place chemical gaskets.

Removing silicones, baked-on gaskets, gaskets from aluminumand small, difficult-to-reach components, weatherstrip

adhesive, dried oil, grease, paint, varnish.

Multi-Purpose Glass Cleaner Deodorizes and cleans window film.Glass, chrome, aluminum, stainless steel

and enamel finishes, plastics.

Industrial Hand Wipes Removes grease, grime, oil, soot, paints, and ink.Removes grease, grime, oil, soot, paints, and ink from

surfaces. Removes grease and grime from hands.

Non-Chlorinated Parts Cleaner Cleaner for removing oil, grease, and asphalt with no chlorinated solvent run-off.

All-purpose metal parts cleaner. Ideal for aluminum surfaces.

Pro Strength Parts CleanerRemoves oil, grease, brake fluids, oxidized oils (gum), and asphalt. Penetrates through dirt and

corrosion and flushes them away.All-purpose metal parts cleaner.

768™ X-NMS Clean-Up Solvent Dissolves cured cyanoacrylate-based adhesives. Disassembly of parts and clean-up of dispensing equipment.

Pro Strength Varnish Remover Dissolves and cleans residue deposited during normaloperation of gasoline engine powered equipment.

Carburetors, chokes, linkages, heat risers, PCV valves,metal parts, industrial equipment.

Industrial Strength Paint Stripper Removes paint, varnish, and glues from metal,wood, and plaster.

Cleaning paint spills, removing various types of paint,contact cements, glues, floor lines, decals, and labels.

NEW

Threadlocking

104

When used to assemble threaded fasteners, Loctite®threadlockers are vastly superior to mechanical lockingdevices. Applied drop-wise to the threads of a fastener,the anaerobic liquid cures to a hard thermoset plasticthat locks the threads together, preventing unwantedmovement or loosening, leaks, and corrosion. To further enhance their performance, unique anaerobic formulations have been developed forapplications with high temperatures, oil contamination, and less reactive surfaces.

Loctite® threadlockers have historically been formulatedas liquids due to their reactivity, and to ensure theyremain stable and ready to use. Recent breakthroughshave led to the development of stable, semi- solid stickformulations. This has opened the door to applicationswhere the liquids were considered too messy orinconvenient. These new semi-solid formulations allowdirect contact of the anaerobic product to the part, andensure not only that the product is placed exactly whereit is needed, but that it also stays there as the threadedpart is positioned and assembled.

Threadlockers

Threaded fasteners continually receive various types of differential stress. Stresses, such as vibration andshock, thermal expansion and contraction, and micro -movement of the fastened parts, all can reduceclamping force and ultimately cause machine failure.Many mechanical devices, such as spring washers, wireretainers and locking bolts, were developed to preventuncontrolled loosening of fasteners. These lockingmethods add substantial cost to the fastener assembly,yet cannot reliably prevent loosening due to theiruneven side or sliding motion. They also do not seal orprevent corrosion within the fastener assembly and mustbe sized appropriately for the specific fastener.

Contrary to common belief, any bolt previously lockedwith threadlocking adhesive is reusable simply byremoving the old adhesive before applying newthreadlocking material and reassembling. Threadlockersare available in low strength formulations for easyremoval, medium strength grades, which are removableusing common hand tools, and high strength gradesthat offer strong holding abilities. However, nothreadlocker is completely permanent; standard handtools remove even the highest - strength threadlockersfollowing direct exposure to heat (450°F to 500°F) forabout five minutes.

This chart should not be used to specify products without specifictesting. It is recommended that you conduct on-part testing toensure product performance before specifying any threadlocker.


In the last fifty years, the introduction of liquid anaerobic threadlockers has dramatically increasedthe reliability of threaded fasteners. In fact, since their introduction, liquid anaerobic products havebecome one of the most reliable ways to ensure that a threaded assembly will remain locked andleak-proof for the service life of the assembly.

105

TH

RE

AD

LO

CK

ING

Selecto

r Guid

e

How do I decide which threadlocker to use?Loctite® threadlockers are available in many grades tosatisfy a wide range of applications. To make grade selectioneasy, the grades are color-coded to help you identify onethreadlocker from the other.

LOW STRENGTH – Purple color, removable with hand tools,good for adjustment screws, calibration screws, metersand gauges, and for fasteners up to 1⁄4" in diameter.

MEDIUM STRENGTH – Blue color, removable with hand tools, good for machine tools and presses, pumps andcompressors, mounting bolts, gear boxes, and for fastenersup to 3⁄4" in diameter.

HIGH STRENGTH – Red color, for permanent assemblies,heavy equipment, suspension bolts, motor and pumpmounts, bearing cap bolts and studs, and for fasteners up to 1" and larger in diameter.

WICKING – Green color, removable with heat and handtools, for pre -assembled fasteners, instrumentation screws, electrical connectors, carburetors and fasteners up to 1⁄2" in diameter.

NON-LIQUIDS – The product “Tight” is a gel formulation and the products Loctite® QuickStix™ 248™ and Loctite®QuickStix™ 268™ are medium and high strength semi -solidthreadlocker sticks.

Is there a threadlocker for high temperature applications? Yes, Henkel has threadlockers for applications below300°F and between 300°F to 450°F. One example isLoctite® 246™, a medium strength product fortemperatures up to 450°F. Other high temperatureproducts can be found in the Properties Chart.

Are there products that work well on oily parts?There are several Loctite® products with oil -cuttingcapabilities. These include Loctite® 243™, 246™, 266™and 294™ threadlockers. Use the Properties Chart tochoose the one that is right for your application.

What do I do when I have a blind hole application?The application method for blind hole assembliesrequires that product be applied to both parts. If productis applied to the fastener only, air pressure will force theliquid threadlocker to escape as you torque down.

Do you have a product for inactive metals?Loctite® 2440™ (medium strength) and 2760™ (highstrength) threadlockers are the latest and besttechnology, enabling the assembly of inactive metalswithout the need to use a primer. These products areideal for use on metals such as stainless steel, zinc,magnesium, black oxide, cadmium, anodizedaluminum, passivated titanium, and others.

How much time is needed for the adhesive to cure?Most anaerobic adhesives attain full cure in around 24hours but will fixture in less time. For cure speed of thevarious products, refer to the Properties Chart or to theTechnical Data Sheets (TDS).

Can I use threadlockers on plastic threads?For plastic fasteners, only use the Loctite® 425™ Assure™Instant Adhesive, a surface curing threadlocker.

When should I use a primer?Primers help speed the curing process for faster returnto service. For this reason, they can be used in anyapplication but are most often used on less active metalsurfaces. Alternately, the use of Loctite® 2440™ and2760™ primerless products, provides a fast cure oninactive surfaces.

Choosing the right threadlocker for the application

What type of metal parts are being assembled?

Threadlocking Selector Guide

Loctite® 2440™ Threadlocker

Active Metals(Metals that rust)

YES – What temperatureperformance is needed?

Are the parts pre-assembled?

In-Active Metals(Metals that do not rust)

PRIMERLESS / MEDIUM STRENGTH

Loctite® 2760™ ThreadlockerPRIMERLESS / HIGH STRENGTH

Loctite® 220 ™ ThreadlockerWICKING / MEDIUM STRENGTH

Loctite® 290 ™ ThreadlockerWICKING / HIGH STRENGTH

300°F to 450°Fup to 300°F (150°C)

NO – Is a liquid or semi-solid/gel preferred?

Loctite® 242 ® ThreadlockerLoctite® 243™ Threadlocker

MEDIUM STRENGTH

Loctite® QuickStix ™

268 ™ Threadlocker HIGH STRENGTH

Loctite® QuickStix ™

248 ™ ThreadlockerLoctite® Tight ® Multi-Purpose

Anaerobic GelMEDIUM STRENGTH

Loctite® 222 ™ ThreadlockerLOW STRENGTH

Loctite® 266 ™ ThreadlockerLoctite® 272 ™ Threadlocker

HIGH STRENGTH

Loctite® 246 ™ ThreadlockerMEDIUM STRENGTH

Loctite® 262™ ThreadlockerLoctite® 271™ ThreadlockerLoctite® 267 ™ Threadlocker

WICKING / HIGH STRENGTH

300°F to 450°F

up to 300°F (150°C)

Liquid – What temperatureperformance is needed?

Semi-solid/gel

Loctite® 294 ™ ThreadlockerWICKING/ HIGH TEMPERATURE

NOTE: Please refer to pages 106-109for more information on these products.

108

TH

RE

AD

LO

CK

ING

� Removable with hand tools� Adjustment screws� Calibration screws� Meters and gauges� Up to 1⁄4" diameters

LOW STRENGTH THREADLOCKERS

MEDIUM STRENGTH THREADLOCKERS

HIGH STRENGTH THREADLOCKERS

WICKING THREADLOCKERS

� Removable with hand tools� Machine tools and presses� Pumps and compressors� Mounting bolts� Gear boxes� Up to 3⁄4" diameters

� Permanent assembly� Heavy equipment� Suspension bolts� Motor and pump mounts� Bearing cap bolts and studs� Up to 1" and larger diameters

� Removable with heat and hand tools� Preassembled fasteners� Instrumentation screws� Electrical connectors� Carburetors� Up to 1⁄2" diameters

WICKINGLOCTITE® 220™ THREADLOCKERMedium Strength/BlueA low viscosity threadlockingadhesive that allows the product to wick along the threads ofpreassembled fasteners. Perfect forfasteners up to 1⁄4" diameter (6 mm).

LOCTITE® 290™ THREADLOCKERMedium Strength/GreenA low viscosity, medium strengththreadlocker for pre-assembledbolts up to 1⁄2" (12 mm) to securethem in place. Penetrates threads by capillary action. Seals porosities in welds and metal parts. Secures set screws and otherassemblies after settings arecompleted. Seals welds and porousmetal parts. Protects threads fromrust and corrosion. Localizedheating and hand tools are neededfor disassembly.

WICKINGLOCTITE® 294™ THREADLOCKERWicking Grade/High TemperatureIdeally suited for pre -assembledfasteners. Performs well on oily fasteners.

PLASTICLOCTITE® 425™ ASSURE™

INSTANT ADHESIVESurface Curing ThreadlockerLow strength, fast curingthreadlocker for plastic fasteners.Can be used as a tamper-proofingagent for the head of screws. Can be applied before or after assembly.

GELLOCTITE® TIGHT®

MULTI-PURPOSE ANAEROBIC GELThis product seals, locks, andretains. It seals against most liquids and gases and works well on coarse threads, large gaps, and all overhead applications.

PRIMERLOCTITE® 7649™ PRIMER N™

Decreases the set-up time ofLoctite® threadlockers and increases breakaway torque on most fastener surfaces. Allowsapplication of threadlockers in cold weather. Contains no ozone -depleting compounds.

Loctite® Shot Miser™ Dispense System is designed for both manualand timed dispensing of all single component products withviscosities ranging from 0 to 80,000 cP. All wetted components areinexpensive and disposable, resulting in low maintenance costsand minimal downtime. This is a complete dispense system whichincludes a reservoir, controller, and dispense valve. The reservoir will directly accept 250 ml and 1 pound product bottles (but not 1 liter containers). For available spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Number: 98116Electrical Power: 120 VAC; 50/60 HzPackage Types and Size:250 ml and 1 lb. bottles

DISPENSING OPTIONS

Loctite® Integrated Semi-Automatic Dispenser systems combinea controller and reservoir into a single unit for valve dispensingof all Loctite® threadlockers. These reservoirs are large enoughto accept up to 2 kg bottles, and units can be equipped with low level sensing.

For available valves, spare parts, accessories and dispense tips, please visit www.equipment.loctite.com.

Item Numbers: 97007, 97010, 97017 and 97020Dimensions: 13.2" H x 13.8" W x 9.1" DWeight: 16.5 lbs. (7.5 kg)Package Types & Sizes: 250 ml, 1 lb. , 1 L and

2 kg bottles, and 200 g squeeze tubes

Indicates TOP CHOICE products.Indicates worldwide availability.

109

TH

RE

AD

LO

CK

ING

LOW

STR

ENG

THR

EMO

VAB

LE S

TREN

GTH

HIG

H S

TREN

GTH

PLAS

TICG

ELPR

IMER

WIC

KIN

G

Loctite® Liquid ThreadlockersProperties Chart


PackageType & Size TE

MPE

RATU

RERA

NGE

CURE

SPE

ED(S

TEEL

AT

25°C

)

SPEC

IFIC

GRAV

ITY

RECO

MM

ENDE

DPR

IMER

OIL

TOLE

RANT

TYP

ICA

LU

SE

COLO

R

AGEN

CYAP

PROV

ALS

VISC

OSIT

Y (c

P)†

TORQ

UE IN

./LBS

.(M

10 S

TEEL

NUT

S &

BOLT

S)BR

EAK/

PREV

AIL

* Breakloose value. † Brookfield RVT spindle 3.20 RPM/25 RPM. ** For new designs.

222™ 2146321464

10 ml bottle50 ml bottle Purple Small screws

under 1⁄4"1,200/5,000Thixotropic 53/30 -65°F to

300°FFixture – 10 min.

Full – 24 hrs. N/A N™ orT™ 1.05 N/A

222MS™ 22205222212223122241

0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle

PurpleEasy removal,small screws

under 1⁄4"

1,200/5,000

Thixotropic53/30 -65°F to

300°F

Fixture – 10 min.

Full – 24 hrs.N/A N™ or

T™ 1.05

MIL-S-46163A forexisting designs,ASTM D-5363**,

NSF P1, CFIA

242® 2420524221242312424124243


BlueRemovable grade,

up to 1⁄4"to 3⁄4" bolts

1,200/5,000Thixotropic 110/43 -65°F to


Full – 24 hrs. N/A N™ orT™ 1.07


NSF/ANSI 61,NSF P1, ABS, CFIA

243™ 2397724077240782407921433


BlueFor 1⁄4" to 3⁄4" bolts

with light oilcontamination

2,250/12,000

Thixotropic180/62 -65°F to

300°FFixture – 5 min.Full – 24 hrs. N/A N™ or

T™ 1.08 NSF/ANSI 61, CFIA

246™ 295132951429515


Blue High temperature,medium strength 2,600 170/48* -65°F to


Full – 24 hrs. Yes N™ orT™ 1.15 N/A

QuickStix™

248™3768437087

9 g stick19 g stick Blue

1⁄4" to 3⁄4"(6 mm to 20 mm) Semi-solid 110/43 -65°F to

300°F

Fixture – 10 min.(3 min. w/primer)

Full – 24 hrs.N/A N™ 1.10 NSF/ANSI 61, CFIA

2432™ 25523 50 ml bottle Blue Low halogen, lowsulfur, medium strength 300 150/53 -65°F to


Full – 24 hrs. N/A N/A 1.08 N/A

2440™ 339463394733948


Blue Primerless,medium strength

1,800/6,800Thixotropic 215/53* -65°F to


Full – 24 hrs. N/A N™ orT™ 1.10 N/A

262™ 2620526221262312624126243

0.5 ml capsule10 ml tube50 ml bottle250 ml bottle1 liter bottle

Red High strength locking,up to 3⁄4" bolts

1,800/5,000Thixotropic 189/275 -65°F to

300°FFixture – 5 min.Full – 24 hrs. N/A N™ or

T™ 1.05

MIL-S-46163A forexisting designs,ASTM D-5363**,NSF P1, ABS, CFIA

266™ 267722677326774


Red-Orange

High strength,high temperature 3,750 to 9,000 270/75 -65°F to


Full – 24 hrs. Yes N™ orT™ 1.19 CFIA

QuickStix™

268™3768537686

9 g stick19 g stick Red Up to 3⁄4"

(Up to 20 mm) Semi-solid 202/4 -65°F to300°F

Fixture – 20 min.(5 min. w/primer)

Full – 24 hrs.N/A N™ 1.06 CFIA

271™ 2710527121271312714127143


RedHigh strength forfasteners up to

1" diameter500 250/275 -65°F to



MIL-S-46163A forexisting designs,ASTM D-5363**,UL Classified for

U.S., CFIA

272™ 272402727027285

50 ml bottle250 ml bottle1 liter bottle

Red High temperatureapplications 9,500 200/220 -65°F to


Full – 24 hrs. N/A N™ orT™ 1.11 CFIA

277™ 21434277312774127743

10 ml bottle50 ml bottle250 ml bottle1 liter bottle

Red High strengthfor large bolts 7,000 275/275 -65°F to



MIL-S-46163A forexisting designs,ASTM D-5363**

2760™ 32526325253252732528

10 ml bottle50 ml bottle250 ml bottle1 liter bottle

Red Primerless,high strength

2,900/10,000

Thixotropic325/320* -65°F to


Full – 24 hrs. N/A N™ orT™ 1.15 CFIA

220™ 373883918622041


BlueWicking grade for

small, pre-assembledfasteners under 1⁄4"

20 85/170 -65°F to300°F

Fixture – 6 min.Full – 24 hrs. No N™ or

T™ 1.08MIL-S-46163A forexisting designs,

ASTM D-5363**, CFIA

290™ 2900529021290312904129043


GreenWicking grade for

pre-assembled parts

12 85/250 -65°F to300°F

Fixture – 6 min.Full – 24 hrs. N/A N™ or

T™ 1.08


NSF/ANSI 61,NSF P1, CFIA

294™ 27934279352793627937


Green High temperature,wicking grade 34 289/237 -65°F to

450°FFixture – 6 min.Full – 24 hrs. Yes N™ or

T™ 1.13 N/A

425™

Assure™4254042561

20 g bottle1 lb. bottle Blue

For small metal andplastic fasteners and

tamper-proofing80 4/2 -65°F to

180°FFixture – 1.5 min.

Full – 24 hrs. N/A N/A 1.10 N/A

Tight® 5160451642

50 ml tube250 ml tube Blue

1⁄8" to 1 1⁄2"(3.175 mm to 38.1 mm) Gel 90/40 -65°F to

300°FFixture – 20 min.(5 min. w/primer) N/A N™ 1.15 N/A

7469™

Primer N™

1926938402213472134838402

1.75 fl. oz. glass bottle1.75 fl. oz. aluminum bottle25 g net wt. aerosol4.5 oz. net wt. aerosol1.75 fl. oz. aluminum bottle

MIL-S-46163A for existing designs, ASTM D-5363 †, NSF/ANSI 61, NSF P1, CFIA

NEW

NEW

Thread Sealing

110

Choosing a thread sealant

When choosing a thread sealant, there are several factors

that need to be considered. The single most important

questioned is substrate. Are we dealing with plastic threads,

metal threads or a combination of both? Plastic threads

usually require a different sealant than metal threads. In

some instances, the environment becomes a factor. If the

application requires the sealant to be in contact with harsh

chemicals, then a chemically -resistant sealant should be

chosen. In other cases, the type of thread comes into play.

For example, if the fitting to be sealed has large coarse

threads, then a sealant with more gap fill should be chosen.

Similarly, a low viscosity sealant would be better suited for

fine threads. When choosing a sealant, it is important to

consider all of the factors. The following chart will help

guide you through your choices.

Why use a solvent-based sealant on plastic fittings?

Anaerobic sealants work by hardening in the absence of air

with the presence of a metal surface. Solvent-based sealants

rely on the solvent evaporating to harden. In the case of

plastic fittings, you must rely on the solvent evaporating to

harden the sealant because there are no metal surfaces to

cure the adhesive. In those cases where you are joining

metal to plastic fittings, solvent - based sealants are still

recommended because inconsistent curing will result due

to only half the substrate being metal.

This chart should not be used to specify products without specifictesting. It is recommended that you conduct on-part testing toensure product performance before specifying any thread sealant.


111

Selecto

r Guid

eTH

RE

AD

SE

ALIN

G

Thread Sealing Selector Guide

General Purpose Low Strength

Chemical Resistance

Semi-Solid

Solvent-Based

Non-Curing

Loctite® Thread Sealant with PTFE

Loctite® No More Leaks™

Plastic Pipe Sealant

Loctite® H.V.A.C.Blue Pipe Joint Compound

Loctite® Thread Seal Tapewith PTFELoctite® QuickStix™ 561™

PST® Pipe Sealant

Gel

Loctite® Tight® Multi-PurposeAnaerobic Gel

Loctite® Pipe Joint Compound

Loctite® 560™ Thread Sealant



High Temperature


Pneumatic/Hydraulic



Nuclear Grade/Low Halogen







Loctite ® 55 ™ Pipe Sealing Cord

Plastic-to-Plastic and Plastic-to-Metal

Metal-to-Metal

Loctite® 567™

PST® Thread Sealant

Loctite® 592™


Loctite® 580™


What Type of Threads do you have?


113

TH

RE

AD

SE

ALIN

G

HYDRAULIC SEALANT CONT.LOCTITE® 569™ THREAD SEALANTHydraulic FittingsLow viscosity original hydraulicsealant. Designed for sealing finethreaded hydraulic fittings. Contains no fillers and has goodchemical resistance.

NUCLEAR GRADE/LOW HALOGENLOCTITE® 580™ PST® THREAD SEALANTLow SulfurFor threaded fittings in fossil fuel,solar and hydro plant piping systems.

LOCTITE® 5772™ THREAD SEALANTLow SulfurA medium strength thread sealantwith fast curing properties.Especially developed for use onsensitive metals, like Titanium, used in the Nuclear Industry. Partscan be separated using hand tools.

LOW STRENGTHLOCTITE® 560™ THREAD SEALANTLow StrengthDesigned for sealing of metal pipesand fittings. This product sealsinstantly for low pressure testing. It can be easily removed on large pipe assemblies.

LOCTITE® 572™ THREAD SEALANTLow StrengthLow strength sealant with moderate fixture speed for use on coarse threads.

CHEMICAL RESISTANCELOCTITE® 554™ THREAD SEALANTRefrigerant SealantExcellent solvent resistance onthreaded fittings and pipes up to 3" in diameter. Recommended forrefrigeration systems and servicewith aggressive chemicals.

LOCTITE® 571™ THREAD SEALANTChemical ResistanceMedium strength thread sealantdesigned for locking and sealingagainst corrosive products. Showsexcellent strength after longexposures to many chemicals.

SEMI-SOLID STICKLOCTITE® QUICKSTIX™ 561™

PST® PIPE SEALANTNew, patented, semi-solid stickformula offers added convenienceand portability. Like Loctite® 565™PST®, this product has immediate lowpressure sealing, eases disassembly,and will not contaminate or cloglines. The semi-solid formula alsomeans it won’t spill or leak, makingit great for overhead applications orcarrying in a pocket or toolbox.

GEL

LOCTITE® TIGHT®

MULTI-PURPOSE ANAEROBIC GELThis product seals, locks, andretains. It seals against most liquids and gases and works well on coarse threads, large gaps, and all overhead applications.

SOLVENT-BASED

LOCTITE® THREAD SEALANT WITH PTFEA general purpose sealant with theadded lubricity of PTFE for metalpipes. Won’t shred like tape andallows easy disassembly. Resistscommon shop fluids.

LOCTITE® PIPE JOINT COMPOUNDEconomical, general purpose pipe thread sealant that will notshred like tape and allows easydisassembly. Resists common shop fluids.

LOCTITE® NO MORE LEAKS™

PLASTIC PIPE SEALANTSeals plastic pipes and allows easydisassembly. Specially formulatedwithout the added lubricity of PTFEto avoid typical cracks when plasticjoints are over tightened.

LOCTITE® H.V.A.C. BLUEPIPE JOINT COMPOUNDTough, pliable sealant speciallyformulated for heating, airconditioning, and refrigerationapplications. Sets up quickly forimmediate assembly and to keepjoints tight in areas of highvibration and thermal cycling. Sealsoils, refrigerants, butane, propane,natural gas, and more. Easy cleanup.

NON- CURING

LOCTITE® THREAD SEAL TAPEWITH PTFE1⁄2" x 520" tape with plastic spool andshell. Can be used in applicationswith temperatures up to 500°F.Oxygen service compatible.

LOCTITE® 55™ PIPE SEALING CORDA general purpose threaded pipeand fitting sealant. A non-curing,coated multifilament cord that seals out air and other commongases and fluids. Recommended forsealing metal and plastic taperedpipe fittings up to 4" NPT. Allows forpost assembly adjustments.

NEW

GEN

ERA

L PU

RPO

SEH

IGH

TEM

PER

ATUR

EH

YDR

AUL

IC &

PNEU

MAT

ICNU

CLEA

R GR

ADE/

LOW

HALO

GEN

LOW

STR

ENG

THCH

EMIC

AL

RES

ISTA

NCE

SEMI

-SOL

IDST

ICKG

ELSO

LVEN

T-BA

SED

NO

N-C

URIN

G

114

TH

RE

AD

SE

ALIN

G

Loctite® Liquid Thread SealantsProperties Chart


PackageType & Size TE

MPE

RATU

RERA

NGE

PRES

SURE

RESI

STAN

CE (P

SI)

RECO

MM

ENDE

DPR

IMER

TYPI

CAL

USE

COLO

R AN

DAP

PEAR

ANCE

AGEN

CYAP

PROV

ALS

VISC

OSIT

Y (c

P)

564™ 2875428755


General purpose,low strength for large

diameter pipeWhite 90,500

-65°F to300°F

10,000N™ or

T™

CSA International, ULCClassified for Canada,

NSF/ANSI 61, CFIA

565™ PST® 565075653156541565715654356566

6 ml tube50 ml tube250 ml tube300 ml cartridge1 liter bottle10 liter bottle

Controlled strength White 300,000-65°F to300°F

10,000N™ or

T™

CSA International,UL Classified for U.S.,

ULC Classified for Canada,NSF/ANSI 61, CFIA

577™ 2145621457


Medium strength,coarse threads

Yellow24,000/80,000

Thixotropic-65°F to300°F

10,000N™ or

T™ N/A

579™ 57941 250 ml tubeLow strength,instant seal

Silver/Brown

20,000-65°F to300°F

10,000N™ or

T™ N/A

567™ PST® 5670756747567653324156790

6 ml tube50 ml tube250 ml tube350 ml brush can1 liter bottle

For stainless steeland all othermetal fittings

White 540,000-65°F to400°F

10,000N™ or

T™

CSA International,UL Classified for U.S.,

ULC Classified for Canada,ABS, CFIA, NSF/ANSI 61

592™ PST® 59214592315924159243

6 ml tube50 ml tube250 ml tube1 liter bottle

Medium strength White 350,000-65°F to400°F

10,000 NF™

UL Classified for U.S.,ULC Classified for Canada,

CFIA

542™ 2145337795


Fine threads Brown525/1,850Thixotropic

-65°F to300°F

10,000N™ or

T™ N/A

545™ 54505324295453154541


Pneumatic hydraulic sealant, no fillers

Purple 14,000-65°F to300°F

10,000N™ or

T™ ABS, CFIA

569™569315694156943

50 ml bottle250 ml bottle1 liter bottle

Original hydraulic sealant Brown 400-65°F to300°F

10,000N™ or

T™ CFIA

580™ PST® 58031 50 ml tubeLow halogen,

low sulfur, PTFE-freeWhite 600,000

-65°F to300°F

10,000 N/A N/A

5772™ 25524 50 ml bottleLow halogen, low sulfur,

medium strength, fast cureYellow 7,500

-65°F to300°F

10,000 N/A N/A

560™ 1178211505


Large diameter,slow cure, low strength

OffWhite

200,000/800,000

-65°F to300°F

10,000N™ or

T™ N/A

572™ 21454 50 ml tube Coarse threads White17,000/50,000

Thixotropic-65°F to300°F

10,000N™ or

T™ N/A

554™ 2588255441


Refrigerant sealant,high strength

Red 2,500-65°F to300°F

10,000N™ or

T™ CFIA

571™ 57141 250 ml bottleHigh strength, excellent

solvent resistanceBrown 2,000

-65°F to300°F

10,000N™ or

T™

Mil-S-22473E for existingdesigns, ASTM D-5363 for

new designs

QuickStix™

561™ PST® 37127 19 g stickGeneral purpose,

portable, overheadWhite Paste

Semi-solidpaste

-65°F to300°F

10,000N™ or

T™

UL Classified for U.S., ULCClassified for Canada, CSA

International, CFIA, NSF/ANSI 61

Tight ® 5160451642


General purpose, vertical Green Gel Gel-65°F to300°F

1,000N™ or

T™ N/A

Thread Sealant with PTFE

3053430561


General purpose, metalpipes, added lubricity

White Paste50,000 to

60,000-65°F to300°F

5,000 N/A CFIA

Pipe JointCompound

3055630557


General purpose, non-shredding, chemical resistant

Black Paste35,000 to

45,000-65°F to400°F

5,000 N/A N/A

No MoreLeaks™

807258072480726

2 fl. oz. tube7 fl. oz. tube1 pt. brush can

Plastic pipes,easy disassembly

White Paste90,000 to110,000

-65°F to400°F

5,000 N/A CFIA

H.V.A.C. Blue PipeJoint Compound

8248082481


Heating, air conditioning,refrigeration

Blue Paste20,000 to

30,000-65°F to400°F

5,000 N/A CFIA

Thread Seal Tapewith PTFE

399041⁄2" x 520" x0.003"

General purpose, oxygenservice compatible

White Tape N/AUp to500°F

PressureRating for Pipe

N/AConforms to MIL-T-27730

55™ Pipe Sealing Cord

3903635082

1,968 inches5,700 inches

Metal and plastic compatible,allows post adjustment

White Coated Cord

N/AUp to300°F

10,000 N/AUL Classified for U.S., CSAInternational, NSF/ANSI 61

Indicates worldwide availability. Indicates TOP CHOICE products.

NEW

Loctite® 50 ml and 250 ml Hand Pumpsare portable, precise, bottle -top applicators that thread directly onto any 50 ml or 250 ml anaerobicbottle. They are designed to dispense atany angle, in drop sizes from 0.01 to 0.04 ml, and with viscosities up to 30,000 cP. There are no leaks or product waste.


Item Numbers: 97001 (250 ml bottles),98414 (50 ml bottles)

TH

RE

AD

SE

ALIN

G

115

Loctite® Dispensing EquipmentHenkel has complete line of off - the -shelf equipmentsystems for dispensing Loctite® thread sealants. Thesemanual and semi-automatic equipment systems aredesigned to reduce waste and operator contact.

Loctite® Dial-A-Seal® Applicator is a touch -actuated, all -pneumaticapplicator for dispensing thread sealants onto threaded pipefittings. The system has a quick turn turret that is equipped withcavities for 1⁄16, 1⁄8, 1⁄2, 3⁄8, 1⁄2, 3⁄4 and 1" male pipe threads. Thisapplicator accepts 50 ml or 250 ml tubes or 1 liter wide mouth bottles.


Item Number: 998400

Loctite® Dispense TipsHenkel offers a comprehensive line of Loctite® tapered polyethylene and flexible polypropylene dispense tips. All tips are designed to stay intact during the toughest applications and provide reliable and consistent dispensing shot after shot.

For available accessories and dispense tips, please visit www.equipment.loctite.com.

Loctite® Cartridge Dispense Tip, 1⁄4" Male NPT Item Number: 98128

3⁄4" x 3⁄8" NPT Dispense Nozzle isdesigned for dispensing threadsealants in wide bands on pipethreads and fittings.

Item Number: 98610

Finding the right thread sealant for the application

1. What are the benefits of using thread sealants?

Thread sealants provide tight seals between joints, can withstand immense pressures, allow for easierassembly and disassembly, prevent corrosion, andprevent parts from “welding” to one another.

2. Which sealants have potable water approvals?

The following Loctite® thread sealants all have a NSF 61 potable water approval rating: Loctite®QuickStix™ 561™ PST®, 55™ Pipe Sealing Cord, 564™, 565™ PST®, and 567™ PST®.

3. What is galling?

Galling occurs when metals weld together due to lackof or ineffective lubrication during assembly. Withoutproper lubrication, mating surfaces wear against eachother and result in “welding” or seizure. Sealantscontaining PTFE increase lubricity, reduce galling, and enable easier assembly and disassembly.

4. Are there any thread sealants available that are compatiblewith systems in oxygen rich environments?

Loctite® Thread Seal Tape with PTFE is the only threadsealing product that is compatibly with systems inoxygen rich environments.

5. Why is the “squeeze out” material around the joint not cured?

In order for anaerobic material to cure, there has to be two mating metal surfaces. Any excess materialthat squeezes from the assembly can simply bewiped away.

SPECIALTY REPAIR LOCTITE® FORM-A-THREAD®

STRIPPED THREAD REPAIR KITPermanently repairs strippedthreads and fasteners in fiveminutes (up to SAE Grade 5 Englishand 8.8 metric). Allows up to 1,538in. lbs. torque (on 1" bolt) and 300°F.Resists most shop fluids.

LOCTITE® O-RING MAKING KITMakes replacement, highperformance o-rings in less than aminute. This compact kit containsthree-foot lengths of commondiameters of Buna N cord, Loctite®404™ Quick Set™ Instant Adhesive, o-ring fixture, blade, a waterproofingsolution, and a cleanup solution.Available in Metric and Standard.

LOCTITE® PIPE REPAIR KITUrethane impregnated fiberglass tape, activated by water, for reliable,temporary repairs of metal, plastic,and composite pipes. Includes Loctite®Fixmaster® Metal Magic Steel™ epoxystick, urethane impregnated fiberglasstape, and gloves. Cures in 30 minutes.

LOCTITE® UNDER PRESSUREPIPE REPAIR KITKit includes vinyl/rubber tape and a urethane impregnated fiberglasstape; designed to make on-site piperepairs in just minutes without theuse of tools or specially trainedpersonnel. Recommended for reliable,temporary, emergency repairs ofmetal, plastic, and composite pipes.Loctite® Urethane Impregnated PipeRepair tape is activated by water andapplied by simply wrapping aroundthe damaged area. Not recommendedfor use on pipelines carrying caustic,hazardous or otherwise harmful materials.

GENERAL MAINTENANCE LOCTITE® MAINTENANCE TACKLEBOXDesigned to fit in a mechanics toolchest, this kit contains 11 greatLoctite® products and a Loctite® “Do- it -Right” Users Guide.

LOCTITE® QUICK SERVICE TOOLKITThe “original” Loctite® kitcontaining 8 of the most commonly Loctite® products.

LOCTITE® TOOLBOXContaining 16 of the latest and best Loctite® technologies to solve the most common mechanicalfailures, this kit contains everything a professional needs to increasereliability at the base component level.

LOCTITE® MANUFACTURINGRELIABILITY TOOLBOXContains 13 Loctite® products and isused during Loctite® ManufacturingReliability Training.

LOCTITE® RELIABILITY TACKLEBOXAn alternative to the Loctite®Manufacturing Reliability Toolbox,this kit contains 14 Loctite® productsfor use during ManufacturingReliability Training.

116

TO

OLB

OX

ES &

SP

EC

IALT

Y K

ITS

Toolboxes &Specialty Kits

NEW

NEW

NEW

NEW

Loctite®

Precision O-Ring Cut and Splice Tool is a patent pending, digital, industrial grade tool that provides precise measuring, cutting and bonding of both standard and metric o-ring cord stock. For use with Item Number8900513, Loctite® Precision O-Ring Kit.

Item Number: 98613 Weight: 2.8 lbs.

DISPENSING OPTIONS

117

TO

OLB

OX

ES &

SP

EC

IALT

Y K

ITS

SPEC

IALT

Y R

EPA

IRG

ENER

AL

MA

INTE

NA

NCE

Loctite® Toolboxes & Specialty Kits Ordering Chart


Kit Contents and Container MAXIMUM TEMPERATURERESISTANCE

ADHESIVEAPPEARANCE

AGENCYAPPROVALS

Form-A-Thread® StrippedThread Repair Kit

28654 12.9 ml kit 300°F Grey (Mixed) CFIA

Loctite®

O-Ring Making KitStandard00112

Metric40488

1 oz. waterproofing solution, part number 741261 oz. clean-up solvent, part number 753261⁄3 oz. 404™ Quick Set™ instant adhesiveFixture and cutting blade[STANDARD] Cord - 3⁄32", 1⁄8", 3⁄16", 1⁄4"[METRIC] Cord 1.6 mm, 2.4 mm, 3.0 mm, 5.7 mm, 8.4 mm

N/A Clear CFIA

Pipe Repair Kit 9632196322

2" x 6' tape 4" x 12' tape

250°F Yellow CFIA

Under PressurePipe Repair Kit

4057940578

2" x 6' tape4" x 15' tape

250°F Yellow N/A

Loctite® Maintenance Tacklebox

33486 242® Threadlocker, Medium Strength, 50 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 g262™ Threadlocker, High Strength, 50 mlQuickStix™ 268™ Threadlocker, High Strength, 9 g609™ Retaining Compound, 10 ml660™ Quick Metal® Retaining Compound, 50 mlQuickStix™ 561™ PST® Pipe Sealant, 19 g518™ Gasket Eliminator® Flange Sealant, 50 ml598™ Black High Performance Silicone, 70 ml7649™ Primer N™, 25 g net wt. aerosol canQuickTite® Instant Adhesive Gel, 0.14 oz. net wt. bottle

N/A N/A N/A

Loctite®

Quick Service Toolkit00101 242® Threadlocker, Medium Strength, 10 ml

262™ Threadlocker, High Strength, 10 ml7649 Primer N™, 4.5 oz. aerosol454™ Prism® Instant Adhesive Gel, 3 g660™ Quick Metal® Retaining Compound, 6 ml565™ PST® Thread Sealant, 50 ml587™ Blue RTV Silicone Gasket Maker, 70 ml518™ Gasket Eliminator® Flange Sealant, 50 ml

N/A N/A N/A

Loctite® Toolbox 38956 220™ Threadlocker, Low Strength/Wicking, 10 ml222MS™ Threadlocker, Low Strength/Small Screw, 10 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 gQuickStix™ 268™ Threadlocker, High Strength, 9 g2440™ Threadlocker, Primerless Medium Strength, 10 ml2760™ Threadlocker, Primerless High Strength, 10 ml518™ Gasket Eliminator® Flange Sealant, 50 ml545™ Thread Sealant, Hydraulic/Pneumatic, 10 mlQuickStix™ 561™ PST® Pipe Sealant, 19 g565™ PST® Thread Sealant, 50 ml587™ Blue, High Performance RTV Silicone, 70 ml641™ Retaining Compound, Low Strength, 10 ml660™ Quick Metal® Retaining Compound, 50 mlQuickStix™ C5-A® Copper Anti-Seize, 20 g7649™ Primer N™, 1.75 oz. net wt. aerosol canQuickTite® Instant Adhesive Gel, 0.14 oz. net wt. bottle

N/A N/A N/A

Loctite® Manufacturing Reliability Toolbox

31362 222MS™ Threadlocker, Low Strength/Small Screw, 10 ml242® Threadlocker, Medium Strength, 50 mlQuickStix™ 248™ Threadlocker, Medium Strength, 9 g262™ Threadlocker, High Strength, 50 ml290™ Threadlocker, Wicking Grade, 50 ml518™ Gasket Eliminator® Flange Sealant, 50 ml545™ Thread Sealant, Hydraulic/Pneumatic, 10 ml565™ PST® Thread Sealant, 50 ml609™ Retaining Compound, 10 ml660™ Quick Metal® Retaining Compound, 50 ml7649™ Primer N™, 1.75 oz. net wt. aerosol canInstant Gasket, 7 oz. net wt. canQuickTite® Instant Adhesive Gel, 0.14 oz. net wt. bottle

N/A N/A N/A

Loctite® Reliability Tacklebox

39062 220™ Threadlocker, Low Strength/Wicking, 10 ml222MS™ Threadlocker, Low Strength/Small Screw, 10 ml243™ Threadlocker, Medium Strength/Oil Resistant, 50 mlQuickStix™ 248™ Threadlocker, Medium Strength, 19 gQuickStix™ 268™ Threadlocker, High Strength, 19 g515™ Gasket Eliminator® Flange Sealant, 50 mlQuickStix™ 561™ PST® Pipe Sealant, 19 g567™ PST® Thread Sealant, High Temperature, 50 ml609™ Retaining Compound, 50 ml660™ Quick Metal® Retaining Compound, 50 ml7649™ Primer N™, 1.75 oz. net wt. aerosol canInstant Gasket, 7 oz. net wt. canQuickStix™ Silver Grade Anti-Seize, 20 gQuickTite® Instant Adhesive Gel, 0.14 oz. net wt. bottle

N/A N/A N/A

NEW

NEW

NEW

NEW

118

Medical ApplicationSolutions

Loctite® adhesives have been specified by medical devicemanufacturers all over the world for over two decades. Ourexperience, products and engineering services are second tonone, with the world’s most diversified and comprehensiveline of adhesives, dispensing equipment, and curing systemsavailable anywhere. We offer nearly fifty products formedical device assemblies requiring biocompatibility, andhundreds of other products for applications not requiringtoxicity testing.

Loctite ® medical device adhesives offer many benefits, including:

✓ Comprehensive ISO-10993 Biocompatibility Testing ✓ Ability to Bond Dissimilar and Difficult Substrates ✓ Even Stress Distribution ✓ Excellent Gap Filling Capability ✓ Rapid Fixture and Overall Cure Times ✓ Structural Bonds ✓ Increased Throughput

Our medical device adhesives cover almost every adhesivechemistry conceivable, providing you with a wide range ofchoices and assembly solutions. We know one product won’tfit every design, and that’s why we continue to create andadd new products, new chemistries, and even newtechnologies. No matter what the application, chances arewe have the right adhesive for the job. Our products areavailable in viscosities ranging from water - thin liquids tothixotropic gels and are compatible with commonsterilization methods such as ethylene oxide, gammaradiation, electron beam, liquid sterilization, autoclave, andperoxide plasma.

Getting Started – Selecting a medical device adhesive

The following chart has been designed to help you select amedical device adhesive. This chart is intended to serve as ageneral guideline to help you determine which adhesivecategories are best suited for your application. The datapresented represents typical properties for each adhesivecategory; however, individual product properties may differ.Individual product information can be found on the pagesthat follow to help you narrow your search.



Henkel’s Medical Device Training ProgramsHenkel offers training programs that provide additionalsupport to device manufacturers. Training support continuesafter the seminar with links to a network of informationalsources including adhesive design guides, research data, andtechnical reports.

For more information on Henkel’s Advanced Medical DeviceAdhesive Workshops and our On- site Seminar program, visitus on the web or call 1-800-LOCTITE (562- 8483)

119

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Selecto

r Guid

e

PERFORMANCECONSIDERATIONS

ADHESIVE CATEGORY

Cyanoacrylates Epoxies Light Cure Adhesives Silicones Urethanes

BENEFITS Wide range of bondingapplications Wide range of formulations Rapid cure/

adhesion to plasticsExcellent temperature

resistanceExcellent toughness/

flexibility

LIMITATIONS Low solvent resistance Mixing required Light cure system required Low cohesive strength Sensitive to moisture


Typical for the category -65°F to +180°F -65°F to +300°F -65°F to +300°F -65°F to +400°F -65°F to +250°F

Highest Rated Product +250°F +300°F +300°F +400°F +250°F

ENVIRONMENTAL RESISTANCE

Polar Solvents(ex. H2O, Ethylene Glycol IPA, Acetone)

Poor1 Very Good Good Good Good

Non-Polar Solvents(ex. Motor Oil, Toluene, Gasoline, ATF)

Good Excellent Very Good Poor to Fair Good

ADHESION TO SUBSTRATES

Metals Very Good Excellent Good Good Good

Plastics 2 Excellent Fair Excellent Good Very Good

Glass Poor Excellent Excellent Good Good

Rubber Very Good Fair Fair Fair Good

Wood Good Very Good Poor Fair Fair

OVERLAPPING SHEAR STRENGTH High High High Low Medium

PEEL STRENGTH Low5 Medium Medium Medium Medium

TENSILE STRENGTH High High High Low Medium

ELONGATION / FLEXIBILITY Low Low Medium Very High High

HARDNESS Rigid Rigid Semi-Rigid Soft Soft

PROCESSCONSIDERATIONS

ADHESIVE CATEGORY

Cyanoacrylates Epoxies Light Cure Adhesives Silicones Urethanes

NUMBER OF COMPONENTS 1 1 and 2 1 1 2

CURE TEMPERATURES Room Temperature Heat or Room Temperature UV/Visible UV/Visible Room Temperature

FIXTURE TIME

Average 60 seconds 5 hours 30 seconds 10 minutes 5 hours

Fastest 5 seconds 15 to 20 minutes 5 seconds 60 seconds 5 hours

FULL CURE TIME 24 hours 1⁄2 to 24 hours30 to 60seconds

24 hours 24 hours

GAP FILL

Ideal (in inches) 0.001 to 0.003 0.004 to 0.006 0.002 to 0.010 0.004 to 0.006 0.004 to 0.006

Maximum (in inches) 0.010 0.5 0.25 0.25 0.5

DISPENSING / MIXINGEQUIPMENT REQUIRED

No Yes (2-parts) No No Yes

LIGHT CURE VERSIONS AVAILABLE? Yes No Yes Yes No

For more information on eachadhesive category refer to pages…

122-123 124-125 120-121 124-125 124-125

1 Cyanoacrylates have very good moisture resistance on plastics.2 Uncured liquid adhesives may cause stress cracking of certain thermoplastics, e.g. polycarbonate, acrylic, and polysulfone. Special products and

process techniques are available. Consult the Loctite® Design Guide to Bonding Plastics (LT-2197) or contact 1-800-LOCTITE (562-8483) for more information.3 Elevated temperatures are required to dispense liquid Hot Melt Adhesives.4 Urethane Hot Melts require 24 hours for full cure.5 Exception: Toughened cyanoacrylates have HIGH peel strength.

Henkel offers the most comprehensive line of Loctite® adhesives and sealantsavailable to the medical device industry. These ISO-10993 compliant products aredesigned specifically for the assembly of medical devices where toxicity testing andsterilization resistance are required.

Medical Applications Solutions Selector Guide

ACRYLICSLOCTITE® 3201™/3211™

LIGHT CURE ADHESIVESPolycarbonate/ ThermoplasticsHigh viscosity, UV/visible adhesivesthat form very flexible joints withminimal stress cracking. Ideal forbonding polycarbonate and other thermoplastics.

LOCTITE® 3301™/3311™/3321™

LIGHT CURE ADHESIVESPlastic/MetalLow viscosity, slightly flexible,UV/visible adhesives. Excellent forbonding thermoplastics andplasticized PVC.

LOCTITE® 3341™ LIGHT CURE ADHESIVEPlasticized SubstratesA rapid cure, UV/visible, fluorescing adhesive that bondshighly plasticized PVC and otherdifficult- to-bond substrates.

LOCTITE® 3345™ LIGHT CURE ADHESIVEGlass/MetalA medium viscosity, UV adhesivewith superior steam sterilizationresistance. Excellent for bondingglass, metal, and select plastics.

LOCTITE® 3381™ LIGHT CURE ADHESIVEFlexible/PlasticsA highly resilient, extremely flexible,thermalcycling-resistant UVadhesive that bonds most plastics.

ACRYLICS

LOCTITE® 3552™/3553™ INDIGO™

VISIBLE LIGHT CURE ADHESIVESHigh and low viscosity adhesives that cure in the visible spectrumoffering properties and performancesimilar to most UV/visible adhesives.Visible light adhesives cure withunique systems that minimizeventing or specialized safetyequipment. Benefits include lowerinitial investment and reducedmaintenance costs.

LOCTITE® 3921™/3922™/3924™/3926™ LIGHT CURE ADHESIVESPlastic/MetalFluorescing, UV/visible adhesivesoffering superior sterilizationresistance. Ideal for bonding a wide variety of plastic and metal components whereenvironmental resistance is required.

LOCTITE® 3941™/3942™/3943™

LIGHT CURE ADHESIVESHigh Performance/Various SubstratesFluorescing, UV/visible acrylicadhesives. Ideal for applicationswhere high strength on a variety of substrates and rapid surface cure are required.

LOCTITE® 3971™/3972™

LIGHT CURE ADHESIVESPlasticized Substrates Rapid curing, UV/visible,fluorescing adhesives that bond highly plasticized materials, including PVC and polyurethane.

120

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Acr

ylic

Ad

hesi

ves

Acrylic Adhesives

DISPENSING OPTIONSLoctite® 7700-HD LED Light Source is designed for continuous duty usage and equipped with an internalcooling fan.

Please visit www.equipment.loctite.com. Item Number: 98601 Weight: 0.75 lbs.

NEW

Indicates TOP CHOICE products. * Made-to-Order Item.

121

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Acrylic

Ad

hesives


Package Type & Size

ACRY

LIC

VISI

BLE

WIT

HFL

UORE

SCEN

CEA

CRYL

IC U

V/VI

SIB

LE W

ITH

FLU

OR

ESCE

NCE

ACR

YLIC

UV/

VISI

BLE

W⁄O

FLUO

RES

CEN

CEA

CRYL

ICUV

ON

LY

Loctite® Medical Device Acrylic Adhesives Properties Chart

3552™ Indigo™ 4097140972


Clear/Light Yellow

VisiblePolycarbonate, thermoplastic,

polyvinylchloride200 -65°F to 300°F �

3553™ Indigo™ 4097740973


Clear/Light Yellow

VisiblePolycarbonate, thermoplastic,

polyvinylchloride3400 -65°F to 300°F �

3341™ 2379223440


Clear/Straw/Fluorescent

Ultraviolet,visible

Thermoplastics, polyvinylchloride 450 -65°F to 300°F �3911™ 36536

36537*25 ml syringe1 liter bottle

Transparent toHazy/Fluorescent

Ultraviolet,visible

Glass, metal, thermoplastic 100 -65°F to 300°F �3912™ 36539



Ultraviolet,visible

Glass, metal, thermoplastic 6,300 -65°F to 300°F �3921™ 36484



Ultraviolet,visible

Glass, metal, thermoplastic,polycarbonate, polyvinylchloride

150 -65°F to 300°F �3922™ 32083



Ultraviolet,visible


300 -65°F to 300°F �3924™ 36488



Ultraviolet,visible


1,100 -65°F to 300°F �3926™ 36492



Ultraviolet,visible


4,500 -65°F to 300°F �3933™ 32084



Ultraviolet,visible

Glass, metal, thermoplastic,polycarbonate

3,250 -65°F to 300°F �3936™ 32304



Ultraviolet,visible

Glass, metal, thermoplastic,polycarbonate

10,000 -65°F to 300°F �3941™ 36437



Ultraviolet,visible

Glass, metal, thermoplastic,thermoset plastic

480 -65°F to 300°F �3942™ 36483



Ultraviolet,visible


1,200 -65°F to 300°F �3943™ 36480


Transparent toHazy/ Fluorescent

Ultraviolet,visible


6,000 -65°F to 300°F �3944™ 38210


Fluorescent/Pale Yellow

Ultraviolet,visible


5,000 -65°F to 300°F �3971™ 36792



Ultraviolet,visible

Metal, thermoplastic,polyvinylchloride, polyurethane

320 -65°F to 300°F �3972™ 36294



Ultraviolet,visible

Metal, thermoplastic,polyvinylchloride, polyurethane

4,500 -65°F to 300°F �3201™ 19727


Clear/Pale StrawUltraviolet,

visibleGlass, metal, thermoplastic,

polycarbonate4,000 -65°F to 300°F �

3211™ 1973019731*




polycarbonate10,000

Thixotropic-65°F to 300°F �

3301™ 1973319734




polycarbonate, polyvinylchloride150 -65°F to 300°F �

3311™ 1973619737




polycarbonate, polyvinylchloride300 -65°F to 300°F �

3321™ 1973919740




polycarbonate, polyvinylchloride5,000 -65°F to 300°F �

3345™ 3341730688*


Clear/Pale Straw Ultraviolet Glass, metal 1,500 -65°F to 300°F �3381™ 25785


Translucent/Colorless

Ultraviolet Thermoplastic, thermoset plastic 5,000 -65°F to 300°F �3913™ 36791



Ultraviolet Glass, metal, thermoplastic 8,500 -65°F to 300°F �

APPEARANCE/CLARITY/COLOR

CURE TYPE KEY SUBSTRATESVISCOSITY (cP)

BROOKFIELD (25°C)TEMPERATURE

RANGEISO-10993

COMPLIANT

NEW

NEW

122

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Cya

noac

ryla

tes,

Acc

eler

ato

rs &

Pri

mer

s

Cyanoacrylates, Accelerators & Primers

NEW

CYANOACRYLATES


MEDICAL DEVICE INSTANT ADHESIVEA low viscosity, instant adhesiveideally suited for dry environments,as well as for bonding acidic surfaces.


INSTANT ADHESIVEA high viscosity, instant adhesive ideally suited for dryenvironments, as well as forbonding acidic and porous surfaces.


INSTANT ADHESIVESurface Insensitive/ToughenedThe first true clear, surface insensitive,elastomer-modified instantadhesive. Faster fixture times overtraditional toughened adhesiveswith exceptional bond and peelstrength on metals, plastics,and rubbers.

LOCTITE® 4851™/4861™ PRISM®

INSTANT ADHESIVESFlexibleMedium and high viscosityinstant adhesives for the assembly of flexible components.

LIGHT CURE CYANOACRYLATES

LOCTITE® 4306™/4307™

FLASHCURE® LIGHT CUREADHESIVESLow or high viscosity fluorescentadhesives that achieve tack- freecures in less than 5 seconds.Surface versatile with shadow cure capability.

PRIMERS


MEDICAL DEVICE PRIMERAn adhesion promoter formulated for use withpolyolefins and other low surfaceenergy plastic materials. Use withLoctite® cyanoacrylate adhesives.Fast dry time and long on -part life.

NEW

NEW

ACC

ELER

ATO

R

AN

D P

RIM

ERS

123

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Cyano

acrylates,A

ccelerators &

Prim

ers

CYA

NOA

CRYL

ATES

LIGH

T CU

RECY

ANOA

CRYL

ATES


Package Type & Size

431™

Prism® (SI)

412544125541256


Clear HumidityThermoplastic, thermosetplastic, metal, elastomer,

including rubber1,000

-65°F to180°F

Pending

435™

Prism® (T)

410054099440995


Clear HumidityThermoplastic, thermoset plastic,metal, elastomer, including rubber

200-65°F to240°F

Pending

4011™

Prism® (SI)1868018681


Clear HumidityThermoplastic, thermosetplastic, metal, elastomer,

including rubber100

-65°F to180°F �

4013™

Prism® (GP)2026818013


Clear HumidityThermoplastic, thermoset

plastic, metal500

-65°F to180°F �

4014™

Prism® (GP)2026918014



plastic, metal3

-65°F to220°F �

4031™

Prism® (LO)1868218683



plastic, metal1,300

-65°F to160°F �

4061™

Prism® (SI)1868618687



20-65°F to180°F �

4081™

Prism® (LO)1868818689



plastic, metal5

-65°F to160°F �

4161™

Super Bonder® (GP)1974319744



plastic, metal1,500

-65°F to180°F �

4206™

Prism® (TR)2862828629*



375-65°F to250°F �

4541™

Prism® (SI)1869018691

20 g tube200 g tube


Gel-65°F to180°F �

4601™

Prism® (LO)1869218693



plastic, metal50

-65°F to160°F �

4851™

Prism® (FL)3773237733

20 g bottle 1 lb. bottle


400-65°F to125°F �

4861™

Prism® (FL)3770837711

20 g bottle 1 lb. bottle


4,000-65°F to125°F �

4981™

Super Bonder® (TR)1869418695



500-65°F to220°F �

4306™

Flashcure®

3743937442*



Ultraviolet,visible,

humidity

Thermoplastic, polycarbonate,elastomer, metal

20-65°F to180°F �

4307™

Flashcure®

3744137443*



Ultraviolet,visible,

humidity

Thermoplastic, polycarbonate,elastomer, metal

900-65°F to180°F �

713™ Prism®

Accelerator19889 1.75 fl. oz. bottle Clear N/A

Isopropanol-based accelerator for cyanoacrylates

1 N/A �7451™ Prism®

Accelerator19890 1.75 fl. oz. bottle Clear N/A

Acetone-based accelerator for cyanoacrylates

1 N/A �7701™ Prism®

Primer1988619887

1.75 fl. oz. bottle16 fl. oz. can

Clear N/AHeptane-based adhesionpromoter for low energy

surface plastics3 N/A �




RANGEISO-10993

COMPLIANT

(SI) – Surface Insensitive(GP) – General Purpose(LO) – Low Odor/Low Bloom

(FL) – Flexible(TR) – Thermally Resistant(T) – Toughened

* Made-to-Order Item

NEW

NEW


Loctite® Medical Device Cyanoacrylate Adhesives,Accelerators and Primers Properties Chart

NEW

NEW

124

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Ep

oxi

es, S

ilico

nes

& U

reth

anes

Epoxies, Silicones &Urethanes

EPOXIES

LOCTITE® 3981™/3982™/3984™

HYSOL® EPOXY ADHESIVESHigh Performance/Various SubstratesHighly fluorescent, one -part, heat cure epoxy adhesives offering superior physical,environmental and performanceproperties.

LOCTITE® M-21HP™ HYSOL®

MEDICAL DEVICE EPOXY ADHESIVEAn off white, toughened epoxy thatprovides high peel resistance andhigh shear strength on a widevariety of plastics and metals.

LOCTITE® M-31CL™ HYSOL®

MEDICAL DEVICE EPOXY ADHESIVEA low viscosity epoxy that bonds glass, ceramic, metal, and many rigid plastics. Ideal for applications where opticalclarity and excellent structuraland mechanical properties are required.

LOCTITE® M-121HP™ HYSOL®

MEDICAL DEVICE EPOXY ADHESIVEA high viscosity, non-sag epoxy for applications that require highimpact resistance and high peelstrength. Bonds dissimilar materialsincluding aluminum, steel, andother metals, as well as a variety of plastics and ceramics.

SILICONE ADHESIVES/SEALANTS


MEDICAL DEVICE SEALANTA self - leveling, UV or visible lightsilicone that also features asecondary moisture cure. Makestransparent, white tinted seals or bonds.


MEDICAL DEVICE SEALANTA self -leveling, UV silicone ideal forsealing and bonding extruded andmoldable silicones, glass, and metals.

URETHANELOCTITE® M-11FL™ HYSOL®

MEDICAL DEVICE URETHANE ADHESIVEA low viscosity urethane that bondspolycarbonate and a variety of otherplastics, glass, and metal. Whenfully set, product forms an ultra-clear bond line and providesexcellent peel strength.

NEW

125

ME

DIC

AL

AP

PLIC

ATIO

NSO

LU

TIO

NS

Ep

oxies, S

ilicones

& U

rethanes

DISPENSING OPTIONS Loctite® Digital Dispensing Syringe System more accuratelydispenses medical device adhesives and epoxies with varying viscosities from water- thin to paste - like consistencies.

For additional air line accessories, dispense tips and spare parts, please visit

www.equipment.loctite.com.

Item Number: 97006Dimensions: 5.7" W x 9" H x 10.2" DPower Supply: Selectable 90/260 VAC;

47/63 Hz

Loctite® 50 ml Dual Cartridge Manual Applicator providesa convenient, cost - effective method to apply productwith minimal waste. This applicator is compatible with1:1 and 2:1 mix ratio products.

For additional accessories, dispense tips and spare parts, please visit www.equipment.loctite.com.

Item Number: 98472

EPO

XIES

URET

HANE

SILI

CONE

ADHE

SIVE

/SEA

LANT

S

Loctite® Medical Device Epoxies, Silicones andUrethanes Properties Chart

3981™

Hysol®

3676637297


Transparent Yellow

Heat cure Thermoset plastic, metal,

glass, ceramic5,300

-65°F to300°F �

3982™

Hysol®

3676737298


Off White Heat cure Thermoset plastic, metal,

glass, ceramic8,000

-65°F to300°F �

3984™

Hysol®

3676837299*


Light Grey Heat cure Thermoset plastic, metal,

glass, ceramic25,500

-65°F to300°F �

M-21HP™

Hysol® 30671 50 ml dual cartridge Off WhiteRoom

temperature

Thermoplastic, thermosetplastic, elastomer, metal,


-65°F to300°F �

M-31CL™

Hysol®

3067330674*


Ultra ClearRoom

temperature

Thermoplastic, thermosetplastic, polycarbonate,metal, glass, ceramic

6,000-65°F to300°F �

M-121HP™

Hysol® 30680 50 ml dual cartridge AmberRoom

temperature

Thermoplastic, polycarbonate,polyvinylchloride, metal,


-65°F to300°F �

5240™

Nuva-Sil®

421984219742200

30 ml syringe300 ml cartridge40 lb. pail*

Translucent/yellow, tinted

liquid

UV/visible,humidity

Silicone, metal, glass, plastic 3,000-65°F to200°F

Pending

5248™

Nuva-Sil® 19987 300 ml cartridgeTranslucent/

StrawUV, humidity Elastomer, metal, glass 50,000

-65°F to350°F �

M-11FL™

Hysol® 30678 50 ml dual cartridge Ultra ClearRoom

temperature

Thermoplastic, thermosetplastic, polycarbonate,

elastomer, metal,glass, ceramic

3,800-65°F to250°F �

Indicates TOP CHOICE products.* Made-to-Order Item

NEW


Package Type & Size




RANGEISO-10993

COMPLIANT

126

Agency Approvals

NSF InternationalNON-FOOD COMPOUNDLoctite® 222MS™ Threadlocker, Low Strength/Small ScrewLoctite® 242® Threadlocker, Medium StrengthLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 290™ Threadlocker, Wicking GradeLoctite® 587™ Blue, High Performance RTV

Silicone Gasket MakerLoctite® 5900® Flange Sealant, Heavy Body RTV SiliconeLoctite® 7649™ Primer N™Loctite® Food Grade Anti-SeizeLoctite® Food Grade GreaseLoctite® ODC-Free Cleaner & Degreaser

STANDARD 51Loctite® Superflex® RTV Silicone Adhesive Sealants

(Black, Clear, White)

STANDARD 61Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-SagLoctite® 55™ Pipe Sealing CordLoctite® 242® Threadlocker, Medium StrengthLoctite® 243™ Threadlocker, Medium Strength/Oil ResistantLoctite® QuickStix™ 248™ Threadlocker,

Medium Strength/RemovableLoctite® 290™ Threadlocker, Wicking GradeLoctite® 480™ Prism® Instant Adhesive, Black/ToughenedLoctite® 518™ Gasket Eliminator® Flange SealantLoctite® QuickStix™ 561™ PST® Pipe Sealant Loctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 680™ Retaining Compound, Slip Fit/High StrengthLoctite® 7649™ Primer N™Loctite® Fixmaster® Metal Magic Steel™Loctite® ViperLube® Clear High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic Grease

American Bureau of Shipping (ABS)Loctite® 242® Threadlocker, Medium StrengthLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 454™ Prism® Instant Adhesive, Surface Insensitive GelLoctite® 495™ Super Bonder® Instant AdhesiveLoctite® 545™ Thread Sealant, Hydraulic/Pneumatic FittingsLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 587™ Blue, High Performance RTV

Silicone Gasket MakerLoctite® 598™ Black, High Performance RTV

Silicone Gasket MakerLoctite® 620™ Retaining Compound, Slip Fit/High TemperatureLoctite® 680™ Retaining Compound, Slip Fit/High StrengthLoctite® Extend® Rust TreatmentLoctite® Fixmaster® Aluminum LiquidLoctite® Fixmaster® Aluminum PuttyLoctite® Fixmaster® Poxy Pak™, Fast Cure EpoxyLoctite® Fixmaster® Fast Set Steel PuttyLoctite® Fixmaster® Flex 80™ PuttyLoctite® Fixmaster® Marine ChockingLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Wear Resistant PuttyLoctite® Fixmaster® Wet Surface Repair PuttyLoctite® Marine Grade Anti-SeizeLoctite® Nickel Anti-SeizeLoctite® Nordbak® Brushable Ceramic, GreyLoctite® Nordbak® Pneu-WearLoctite® Silver Grade Anti-Seize

Navy Environmental Health Center (NEHC) andNaval Sea Systems Command (NAVSEA)Loctite® Fixmaster® Aluminum PuttyLoctite® Fixmaster® Fast Set Steel EpoxyLoctite® Fixmaster® Marine Chocking – OrangeLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Superior Metal Loctite® Fixmaster® Wear Resistant PuttyLoctite® Fixmaster® Wet Surface Repair PuttyLoctite® Nordbak® Brushable Ceramic – GreyLoctite® Nordbak® Pneu-WearLoctite® Nordbak® Wearing Compound

Canadian Food Inspection Agency (CFIA)Loctite® 220™ Threadlocker, Wicking Grade/Low StrengthLoctite® 222MS™ Threadlocker, Low Strength/Small Screw Loctite® 242® Threadlocker, Medium StrengthLoctite® 243™ Threadlocker, Medium Strength/Oil ResistantLoctite® QuickStix™ 248™ Threadlocker,

Medium Strength/RemovableLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 266™ Threadlocker, High Strength/High TemperatureLoctite® QuickStix™ 268™ Threadlocker, High StrengthLoctite® 271® Threadlocker, High StrengthLoctite® 272™ Threadlocker, High Strength/High TemperatureLoctite® 2760™ Threadlocker, Primerless/High StrengthLoctite® 290™ Threadlocker, Wicking GradeLoctite® 330™ Depend® Adhesive, No MixLoctite® 380™ Black Max® Instant Adhesive, Toughened Loctite® 401™ Prism® Instant Adhesive, Surface InsensitiveLoctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 410™ Prism® Instant Adhesive, Black/ToughenedLoctite® 414™ Super Bonder® Instant Adhesive Loctite® 416™ Super Bonder® Instant AdhesiveLoctite® 422™ Super Bonder® Instant AdhesiveLoctite® 454™ Prism® Instant Adhesive, Surface Insensitive GelLoctite® 518™ Gasket Eliminator® Flange SealantLoctite® 545™ Thread Sealant, Pneumatic/HydraulicLoctite® QuickStix™ 548™ Gasket Eliminator® Flange SealantLoctite® 554™ Thread Sealant, Refrigerant SealantLoctite® QuickStix™ 561™ PST® Pipe SealantLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 569™ Thread Sealant, Hydraulic SealantLoctite® 5699™ Grey, High Performance RTV

Silicone Gasket MakerLoctite® 587™ Blue, High Performance RTV

Silicone Gasket MakerLoctite® 5900® Flange Sealant, Heavy Body RTV SiliconeLoctite® 5905™ Flange Sealant, RTV SiliconeLoctite® 5910® Flange Sealant, RTV SiliconeLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® 5920™ Copper, High Performance RTV

Silicone Gasket MakerLoctite® Superflex® Silicone Adhesive Sealant, Black Loctite® Superflex® Silicone Adhesive Sealant, WhiteLoctite® Superflex® Silicone Adhesive Sealant, ClearLoctite® Superflex® Red High Temp RTV,

Silicone Adhesive SealantLoctite® 598™ Black, High Performance RTV

Silicone Gasket MakerLoctite® 609™ Retaining Compound, Press Fit/General PurposeLoctite® 620™ Retaining Compound, Slip Fit/High TemperatureLoctite® 638™ Retaining Compound, Slip Fit/Maximum StrengthLoctite® 641™ Retaining Compound,

Press & Slip Fit/Controlled Strength

Loctite® 660™ Quick Metal® Retaining Compound,Press Fit Repair

Loctite® 680™ Retaining Compound, Slip Fit/High StrengthLoctite® 712™ Tak Pak® AcceleratorLoctite® 7649™ Primer N™Loctite® 770™ Prism® PrimerLoctite® Aviation Gasket SealantLoctite® Belt Dressing & ConditionerLoctite® Big Foot™ Acrylic Pedestrian GradeLoctite® Big Foot™ Heavy Duty Pedestrian GradeLoctite® Big Foot™ Low Profile Pedestrian GradeLoctite® Big Foot™ Vehicular GradeLoctite® Big Foot™ Zero V.O.C.Loctite® QuickStix™ C5-A® Copper Anti-SeizeLoctite® Chisel® Gasket RemoverLoctite® Cold Galvanizing CompoundLoctite® Color Guard®, BlackLoctite® Color Guard®, BlueLoctite® Color Guard®, RedLoctite® Color Guard®, YellowLoctite® Contact Adhesive, YellowLoctite® Contact Adhesive, BlackLoctite® Extend® Rust TreatmentLoctite® Fixmaster® Aluminum LiquidLoctite® Fixmaster® Aluminum PuttyLoctite® Nordbak® Brushable Ceramic, GreyLoctite® Nordbak® Brushable Ceramic, RedLoctite® Nordbak® Brushable Ceramic, WhiteLoctite® Nordbak® Chemical Resistant CoatingLoctite® Fixmaster® Deep Pour GroutLoctite® Fixmaster® Fast Cure Epoxy, Mixer CupsLoctite® Fixmaster® Poxy Pak™Loctite® Fixmaster® Fast Set GroutLoctite® Fixmaster® Fast Set Steel EpoxyLoctite® Fixmaster® Fast Set Steel PuttyLoctite® Fixmaster® Floor FillLoctite® Fixmaster® General Purpose Epoxy, Mixer CupsLoctite® Fixmaster® High Performance EpoxyLoctite® Fixmaster® High Performance QuartzLoctite® Fixmaster® Magna-CreteLoctite® Fixmaster® Marine ChockingLoctite® Nordbak® Fast Cure Pneu-WearLoctite® Nordbak® Pneu-WearLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Superior MetalLoctite® Fixmaster® Underwater Repair EpoxyLoctite® Fixmaster® Wear Resistant PuttyLoctite® Food Grade Anti-SeizeLoctite® Food Grade GreaseLoctite® Silicone LubricantLoctite® Form-A-Thread® Stripped Thread RepairLoctite® Gasket Sealant 1Loctite® High Temperature Gasket MakerLoctite® H.V.A.C. Blue Pipe Joint CompoundLoctite® 0151™ Hysol® Epoxy Adhesive, Ultra ClearLoctite® 10C™ Hysol® Epoxy AdhesiveLoctite® 11C™ Hysol® Epoxy AdhesiveLoctite® 1C™ Hysol® Epoxy AdhesiveLoctite® 608™ Hysol® Epoxy Adhesive, High StrengthLoctite® 615™ Hysol® Epoxy Adhesive, SandableLoctite® 6C™ Hysol® Epoxy AdhesiveLoctite® 907™ Hysol® Epoxy AdhesiveLoctite® 9340™ Hysol® Epoxy AdhesiveLoctite® E-00CL™ Hysol® Epoxy Adhesive, Low OdorLoctite® E-00NS™ Hysol® Epoxy Adhesive, Non-SagLoctite® E-05CL™ Hysol® Epoxy Adhesive, ToughenedLoctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast SettingLoctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder

127

AG

EN

CY

AP

PR

OVA

LS

The information above is an abbreviated list of Loctite® products that hold industry approvals. It is designed to serve as a quickreference tool only and is subject to change. There are other Loctite® brand products that qualify for additional industry approvals thatare not promoted in this catalog. Please call Henkel Technical Support at 1-800-LOCTITE (562-8483) with any inquiries.

Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass BonderLoctite® E-40FL™ Hysol® Epoxy Adhesive, FlexibleLoctite® E-60HP™ Hysol® Epoxy Adhesive, ToughenedLoctite® E-60NC™ Hysol® Epoxy Adhesive,

Electrically Non-CorrosiveLoctite® E-90FL™ Hysol® Epoxy Adhesive, FlexibleLoctite® U-05FL™ Hysol® Urethane Adhesive, High StrengthLoctite® U-10FL™ Hysol® Urethane AdhesiveLoctite® Instant GasketLoctite® Maintain® Lubricant PenetrantLoctite® Maxi-Coat™, AerosolLoctite® Maxi-Coat™, LiquidLoctite® Natural Blue® Biodegradable Cleaner & DegreaserLoctite® Natural Blue® Biodegradable

Cleaner & Degreaser, Fragrance-FreeLoctite® No More Leaks™ Plastic Pipe SealantLoctite® O-Ring Making KitLoctite® Pipe Repair KitLoctite® QuickStix™ Silver Grade Anti-SeizeLoctite® Silver Grade Anti-SeizeLoctite® Silver Grade Anti-Seize, AerosolLoctite® Solvo-Rust® Super Penetrating OilLoctite® Thread Sealant With PTFELoctite® Urethane SealantLoctite® ViperLube® Clear High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic GreaseLoctite® ViperLube® High Performance Synthetic Grease, Aerosol

Military Specifications (Mil Spec)Loctite® 220™ Threadlocker, Wicking Grade/Low StrengthLoctite® 222MS™ Threadlocker, Low Strength/Small ScrewLoctite® 242® Threadlocker, Medium StrengthLoctite® 262™ Threadlocker, Medium to High StrengthLoctite® 271™ Threadlocker, High StrengthLoctite® 277™ Threadlocker, High Strength/Large ThreadsLoctite® 290™ Threadlocker, Wicking GradeLoctite® 571™ Thread Sealant, Pipe Sealant HVVLoctite® 609™ Retaining Compound, Press Fit/General PurposeLoctite® 635™ Retaining Compound,

Slip Fit/High Strength/Slow CureLoctite® 640™ Retaining Compound,

Press Fit/Medium Strength/High TemperatureLoctite® 675™ Retaining Compound, Press Fit/Medium StrengthLoctite® 712™ Tak Pak® AcceleratorLoctite® 5040™ RTV SiliconeLoctite® 5045™ Flange SealantLoctite® 7452™ Tak Pak® AcceleratorLoctite® 7471™ Primer T™Loctite® 7649™ Primer N™Loctite® C5-A® Copper Anti-Seize LubricantLoctite® Moly-50™ Anti-SeizeLoctite® QuickStix™ C5-A® Copper Anti-SeizeLoctite® QuickStix™ Silver Grade Anti-SeizeLoctite® Silver Grade Anti-SeizeLoctite® Thread Sealant With PTFE

Military Specifications (Commercial Item Standard)Loctite® 404™ Quick Set™ Instant Adhesive, General PurposeLoctite® 406™ Prism® Instant Adhesive, Surface InsensitiveLoctite® 414™ Super Bonder® Instant Adhesive Loctite® 415™ Super Bonder® Instant Adhesive Loctite® 416™ Super Bonder® Instant Adhesive Loctite® 420™ Super Bonder® Instant Adhesive Loctite® 422™ Super Bonder® Instant Adhesive Loctite® 430™ Super Bonder® Instant AdhesiveLoctite® 444™ Tak Pak® Instant AdhesiveLoctite® 493™ Super Bonder® Instant AdhesiveLoctite® 495™ Super Bonder® Instant AdhesiveLoctite® 496™ Super Bonder® Instant Adhesive

FDA CFR175.105Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA BasedLoctite® 232™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 236™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 342™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 740™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 0740LV™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 1942™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® 6002™ Hysol® Hot Melt Adhesive Loctite® CoolMelt™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® QuikPac™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® SuperPac™ Hysol® Hot Melt Adhesive, EVA BasedLoctite® WaxPac™ Hysol® Hot Melt Adhesive, EVA Based

UL Classified/Listed for U.S.Loctite® 55™ Pipe Sealing CordLoctite® 271™ Threadlocker, High StrengthLoctite® 510™ Gasket Eliminator® Flange SealantLoctite® 515™ Gasket Eliminator® Flange SealantLoctite® QuickStix™ 561™ PST® Pipe Sealant Loctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 587™ Blue, High Performance RTV

Silicone Gasket MakerLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® 5083™ Nuva-Sil® Silicone Potting CompoundLoctite® 5091™ Nuva-Sil® Silicone

Potting Compound, High AdhesionLoctite® 5600™ Silicone SealantLoctite® 5950™ Fastgasket® Flange Sealant, Cure-in-PlaceLoctite® 7804FRM-HV™ Hysol® Hot Melt AdhesiveLoctite® 7809FR™ Hysol® Hot Melt Adhesive, PolyamideLoctite® Superflex® Clear Non-Corrosive RTV,

Clear Silicone Adhesive SealantLoctite® Superflex® RTV, Silicone Adhesive Sealants


ULC Classified for CanadaLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® 592™ PST® Thread Sealant, Slow CureLoctite® QuickStix™ 561™ PST® Pipe SealantLoctite® Superflex® RTV, Silicone Adhesive Sealants


CSA InternationalLoctite® 55™ Pipe Sealing CordLoctite® 564™ Thread Sealant, General PurposeLoctite® 565™ PST® Thread Sealant, Controlled StrengthLoctite® 567™ PST® Thread Sealant, High TemperatureLoctite® QuickStix™ 561™ PST® Pipe Sealant

ISO-10993 ComplianceLoctite® M-11FL™ Hysol® Medical Device Urethane AdhesiveLoctite® M-21HP™ Hysol® Medical Device Epoxy AdhesiveLoctite® M-31CL™ Hysol® Medical Device Epoxy AdhesiveLoctite® M-121HP™ Hysol® Medical Device Epoxy AdhesiveLoctite® 713™ Prism® Medical Device AcceleratorLoctite® 3201™ Light Cure Adhesive,

Polycarbonate/ThermoplasticsLoctite® 3211™ Light Cure Adhesive,

Polycarbonate/ThermoplasticsLoctite® 3301™ Light Cure Adhesive, Plastic/MetalLoctite® 3311™ Light Cure Adhesive, Plastic/MetalLoctite® 3321™ Light Cure Adhesive, Plastic/MetalLoctite® 3341™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3345™ Light Cure Adhesive, Glass/Metal Loctite® 3381™ Light Cure Adhesive, Flexible/PlasticsLoctite® 3552™ Indigo™ Light Cure Adhesive

Loctite® 3553™ Indigo™ Light Cure AdhesiveLoctite® 3911™ Light Cure AdhesiveLoctite® 3912™ Light Cure AdhesiveLoctite® 3913™ Light Cure AdhesiveLoctite® 3921™ Light Cure Adhesive, Plastic/MetalLoctite® 3922™ Light Cure Adhesive, Plastic/MetalLoctite® 3924™ Light Cure Adhesive, Plastic/MetalLoctite® 3926™ Light Cure Adhesive, Plastic/MetalLoctite® 3933™ Light Cure AdhesiveLoctite® 3936™ Light Cure AdhesiveLoctite® 3941™ Light Cure Adhesive,

High Performance/Various SubstratesLoctite® 3942™ Light Cure Adhesive,

High Performance/Various SubstratesLoctite® 3943™ Light Cure Adhesive,

High Performance/Various SubstratesLoctite® 3944™ Light Cure AdhesiveLoctite® 3971™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3972™ Light Cure Adhesive, Plasticized SubstratesLoctite® 3981™ Hysol® Epoxy Adhesive,

High Performance/Various SubstratesLoctite® 3982™ Hysol® Epoxy Adhesive,

High Performance/Various SubstratesLoctite® 3984™ Hysol® Epoxy Adhesive,

High Performance/Various SubstratesLoctite® 4011™ Prism® Medical Device Instant AdhesiveLoctite® 4013™ Prism® Medical Device Instant AdhesiveLoctite® 4014™ Prism® Medical Device Instant AdhesiveLoctite® 4031™ Prism® Medical Device Instant AdhesiveLoctite® 4061™ Prism® Medical Device Instant AdhesiveLoctite® 4081™ Prism® Medical Device Instant AdhesiveLoctite® 4161™ Super Bonder® Medical

Device Instant AdhesiveLoctite® 4206™ Prism® Medical Device Instant AdhesiveLoctite® 4304™ Flashcure® Light Cure AdhesiveLoctite® 4305™ Flashcure® Light Cure AdhesiveLoctite® 4306™ Flashcure® Light Cure Adhesive, InstantLoctite® 4307™ Flashcure® Light Cure Adhesive, InstantLoctite® 4541™ Prism® Medical Device Instant AdhesiveLoctite® 4601™ Prism® Medical Device Instant AdhesiveLoctite® 4851™ Prism® Medical Device Instant Adhesive, FlexibleLoctite® 4861™ Prism® Medical Device Instant Adhesive, FlexibleLoctite® 4981™ Super Bonder® Medical Device Instant AdhesiveLoctite® 5248™ Nuva-Sil® Medical Device Silicone AdhesiveLoctite® 7451™ Prism® Medical Device AcceleratorLoctite® 7701™ Prism® Medical Device Adhesive Primer

Lloyd’s Register CertificationLoctite® Fixmaster® Aluminum Liquid Loctite® Fixmaster® Aluminum PuttyLoctite® Fixmaster® Fast Set Steel epoxyLoctite® Fixmaster® Marine Chocking – OrangeLoctite® Fixmaster® Marine Chocking – GreenLoctite® Fixmaster® Steel LiquidLoctite® Fixmaster® Steel PuttyLoctite® Fixmaster® Stainless Steel PuttyLoctite® Fixmaster® Superior MetalLoctite® Fixmaster® Wear Resistant PuttyLoctite® Nordbak® Pneu-WearLoctite® Nordbak® Brushable Ceramic – Grey

F.A.Q.s

128

Mathematical ConversionsThe following are some common conversions that might behelpful when utilizing Loctite® products:

• 1 milliliter (ml) = 1 cubic centimeter (cc)

• 1,000 ml = 1 liter

• 29.5 ml = 1 fl. oz.

• 3.78 liters = 1 gallon

• 473 ml = 1 pint

• 454 grams = 1 lb.

• 947 ml = 1 quart

• 1 kilogram = 2.2 lbs.

• Weight to Volume: grams ÷ specific gravity = cc (ml)

• Volume to Weight: cc (ml) x specific gravity = grams

• Density = specific gravity x 0.99823

• Centipoises = centistokes x density (at a given temp.)

• Temperature: degrees F - 32 x 0.556 = degrees C

degrees C x 1.8 + 32 = degrees F

• Square Inches to Square Feet: ÷ by 144

• Square Feet to Square Inches: x by 144

• In./ lbs. ÷ 12 = ft. / lbs.

• Ft./ lbs. x 12 = in. / lbs.

• 16 in. oz. = 1 in. lb.

• 192 in. oz. = 1 ft. lb.

Area CoverageFlat Parts:

Length x Width x Bondline Thickness x 16.4 = cc/ml requirement per part

Non-threaded Cylindrical Parts:Diameter x Engagement Length x Bondline Thickness(on radius/per side) x 3.14 x 16.4 = cc/ml requirement per part

Potting/Encapsulating Applications:Area (3.14 x R2 ) x Potting Depth x 16.4 = cc/mlrequirement per part

For no induced gap, make the bondline thickness figure 0.001".16.4 is a constant for converting cubic inches to cubic centimeters.

Durometer HardnessDurometer hardness is a property presented on technicaldata sheets that shows how hard the resin is in the curedstate. A durometer gauge is the actual measuring deviceconsisting of a small drill or blunt indentor point underpressure. Different measurement scales are used fordifferent materials depending on how soft or hard thematerial. The following chart compares three (3) differentgraduated measurement scales and relates hardness valuesto some common objects as well as Loctite® brand products.

The higher the number within each scale, the harder thematerial. Shore readings are typically used for plastics.Shore A is for softer materials; Shore D is for hardermaterials. Rockwell readings are typically used for metals.

SHORE A

SHORED

ROCKWELLM

REFERENCEOBJECT

LOCTITE®

PRODUCT

30 – – Art Gum Eraser 5140™

40 – – Pink Pearl Eraser 5900®

50 15 – Rubber Stamp –

60 – – Pencil Eraser 5699™

70 30 – Rubber Heel –

80 – – Rubber Sole –

90 45 – Typewrite Roller 366™

100 55 – Pipe Stem 3106™

– 74 0 Textbook Cover 334™

– 78 32 Douglas Fir Plywood –

– 82 63 – E-60HP™

– 86 95 Hardwood Desktop –

– 90 125 Glass or Formica –

example: L3 6 F A C 5 6 9

129

F.A.Q

.s

Shelf LifeWhat is the Henkel shelf life policy for Loctite® products?

The shelf life period for Loctite® products is one year fromdate of shipment from Henkel facilities or as indicated bypackage labeling. For optimal storage, maintain product at atemperature between 8°C (46°F) to 21°C (70°F). Storagebelow 8°C (46°F) or greater than 28°C (82°F) can adverselyaffect product properties. Cyanoacrylate products must bestored under refrigerated conditions at 2°C (36°F) to 8°C(46°F). Storage below 2°C (36°F) or greater than 8°C (46°F)can adversely affect product properties. Products requiringstorage at conditions other than those specified here arelabeled accordingly. Material removed from containers maybe contaminated during use. Do not return product tooriginal containers. Henkel cannot assume responsibility forproduct which has been contaminated or stored underconditions other than as recommended. This policysupersedes all previous policies regarding shelf life andstorage of Loctite® products.

Do the 9 character batch codes on containers signify thedate of shipment?

No... This code signifies date of manufacture. Certified shelf life is based on this code only if date ofshipment cannot be determined. This is generally twoyears from date of manufacturing for most products.

How do you read this 9 character batch code?

Once a product reaches its “1 year from date of shipment”date, does this mean it can no longer be used?

No... Henkel offers a policy for extension of shelf life.Contact Customer Service (800-243-4874) for details.

Location ofPackagerL3 = Puerto Rico

Last Digit in the Yearof Manufacture6 = 2006

Month within year of manufacture.H = 8th letter of alphabet. Thus, H = August, 8th month of year (A = Jan., B = Feb., etc.)

Last 3 to 5 characterssignify batch numberof that particular batch of product. (Henkel’s internal code)

ViscosityViscosity is a product property associated with all Loctite®adhesive/sealants. Viscosity is defined as a measure of theresistance of a fluid to flow (usually through a specificorifice). A measure of this fluid “thickness” is expressed incentipose values. The higher the number, the thicker theproduct. Thicker products are less flowable, and in mostcases, will fill a larger gap if necessary. The following chartrelates viscosity to some products we are all familiar with:

Some products are considered thixotropic. This describesmaterials that are gel- like at rest but fluid when agitated.Ketchup is a good example that exhibits this property.Loctite® products include Loctite® 262™ Threadlocker andLoctite® 509™ Flange Sealant.

PRODUCTAPPROXIMATEVISCOSITY IN

CENTIPOSE (CP)CYANOACRYLATES ANAEROBICS

Water at 70°C 1-5 420™ –

Blood or Kerosene 10 – 290™

Anti-Freeze or Ethylene Glycol

15 406™ Letter Grade A

Motor Oil SAE 10 orCorn Oil

50 -100 414™ / 496™ 609™

Motor Oil SAE 30 or Maple Syrup

150-200 – 675™

Motor Oil SAE 40 or Castor Oil

250-500 4203™ / 4471™ 640™

Motor Oil SAE 60 orGlycerin

1,000-2,000 403™ / 422™ 222MS™ / 242® / 262™

Corn Syrup or Honey 2,000-3,000 410™ / 4211™ 635™

Blackstrap Molasses 5,000-10,000 411™ / 382™ 277™ / 620™

Chocolate Syrup 10,000-25,000 – 324™ / 326™

Ketchup or Mustard 50,000-70,000 409™ 330™

Tomato Paste or Peanut Butter

150,000-250,000 – 592™

Shortening or Lard 1,000,000-2,000,000 – 660™

Caulking Compound 5,000,000-10,000,000 – 593™

Window Putty 100,000,000 – –

130

SE

RVIC

ES

Services

In today’s volatile and fluid market landscape, a manufacturer’s survival and success are directly relatedto its technical capability. Rapidly emerging, innovativeprocesses and materials mandate an unprecedentedbreadth and depth of engineering savvy. Not everycompany can house the equipment and engineering ºstaff necessary to compete in today’s marketplace. Theengineering services group of Henkel of understands thenecessity of partnering with manufacturers and sharingthis expertise with the industry through cost-effective,custom-tailored programs.

These programs range from specialized field teams that evaluate specifications and in-line processrequirements, to the development of adhesives, and thedesign, construction and implementation of dispensingand curing systems. Whether you need competent recommendations on chemical properties, or a full-blown, turnkey process line, the engineering services group of Henkel can provide solutions through theseamless integration of mechanical, electrical, industrial manufacturing, and chemical engineering teams.

Henkel Corporation offers complete engineering services for projects demanding expertise and support beyondthe limits of our standard technical services. As a result, our engineers and scientists can quote the followingvalue-added services:

• On-site engineering assistance • Joint product development programs • Prototype testing and fixture preparationand consultation • Contract lab services and testing • Custom formulations

The Application Engineering Lab plays host to a battery of testing equipment. Here, experienced technicians conducta multitude of tests, such as detack, surface contamination, deforming, fixture, tensile and peel strengths.

Engineering Services

131

SE

RVIC

ES

Eng

ineeringS

ervices

Crucial in the engineering process is determiningwhether the customer’s application and the adhesivecriteria can withstand the gauntlet of rigorousstrength tests performed by Henkel. Custom testfixtures and protocols can be developed to meetspecific end-use requirements.

Our engineers can also create environmentalconditions that simulate, and even exceed, the mostsevere conditions. With heat aging, salt fog, humidityand thermal cycling chambers, manufacturers can beprovided confidence in the durability and longevity ofan assembly in the field.

Engineers specializing in Loctite® products arefrequently called upon to provide process simulations of customer parts on short production runs, such asgasketing. Our prototyping capability provides valuabledata regarding the feasibility of full-scale manufacture.

To access these and other Engineering Services, contact our Adhesives and Sealants Specialists at 1-800-LOCTITE (562-8483).

Immediate technical assistance is available between 8 am to 5 pm EST.

132

SE

RVIC

ES

Educate your engineers on how to cut costs, improve quality and increase productionthrough the integration of adhesives into the new product design process. Eachinstructional event touches on the wide array of Loctite® product solutions includingadhesives and sealants, dispensing and curing equipment, as well as the unmatchedtechnical support of our product specialists.

LOCTITE® OEM WORKSHOPFull or half day on-site product training customized to addressspecific design needs at your client’s manufacturing location.

LOCTITE® OEM CUSTOMER TRAINING SCHOOL Full or half day off - site training designed specifically for design,product, process, material and manufacturing engineersresponsible for assemblies involving the use of adhesives.

DESIGNING PUMPS WITH ADHESIVES SEMINARTwo to four hour training on adhesives, coatings, lubricants andthe performance improvements their implementation provides to pump manufacturers.

DESIGNING ELECTRIC MOTORS WITH ADHESIVES SEMINARThis half -day seminar reviews in detail the many ways motormanufacturers are using adhesives and sealants to improveperformance, reduce costs and enhance manufacturability. The seminar includes many hands -on demonstrations and realworld case histories.

MEDICAL ADVANCED WORKSHOP A four to seven hour off - site program providing solutions tomedical device manufacturers on design and assemblychallenges. The workshop is designed specifically for product,manufacturing, and design engineers and includes hands -ondemonstrations of adhesives and equipment.

MEDICAL TECHNOLOGY ON-SITE SEMINARSelect from a menu of seven of the most requested medical device adhesive topics or create a customized seminar to meetyour client’s specific requirements. Courses are conducted at aclient location (“on-site”) and include instruction, hands -ondemonstrations, samples, and technical guides.

PLANT SURVEYA detailed manufacturing process evaluation performed by aLoctite® Adhesives and Sealant Specialist to identify potential costsavings and process improvements.

PR

OD

UC

T

WO

RK

SH

OP

SIN

DU

STR

Y W

OR

KSH

OP

SSE

RVIC

ES

OEM Training Services

OE

M T

rain

ing

Ser

vice

s

133

SE

RVIC

ES

LOCTITE® MAINTENANCE WORKSHOPTwo hours of on-site product training customized to your clients’needs. Optional cost documentation process available.

LOCTITE® PUMP REBUILD WORKSHOPTwo to four hours of product training on how Loctite®products can improve pump reliability and reduce commonfailures. Includes pump rebuild manual.

LOCTITE® MAINTENANCE CUSTOMER TRAINING SCHOOL Full or half day product training with review of commonmaintenance challenges and the appropriate Loctite® product solutions.

MAINTENANCE RELIABILITY TRAINING (MRT) Four hours of CEU accredited product and failure modetraining. Includes in-depth training manual and product tool kit.

MAINTENANCE RELIABILITY TRAINING (MRT) DOCUMENTEDFour hours of CEU accredited training on mechanical basics,failure fundamentals and the role of machinery adhesives inequipment reliability. Includes training manual and producttool kit. Optional cost documentation process included at no charge.

ENGINEERING ASSISTANCEHenkel offers many other services including air leak surveys,pump rebuild assistance, and flooring application assistance.In addition, Henkel offers an optional cost documentationprocess with the MRT programs and Maintenance Workshop listed above.

All of the following services will teach your maintenancepersonnel how to save time, reduce costs, improve safety in yourplant and increase the reliability of your equipment.

MRO Training ServicesP

RO

DU

CT W

OR

KSH

OP

SM

AN

UFA

CTU

RIN

G

RE

LIA

BIL

ITY T

RA

ININ

GSE

RVIC

ES

MR

O Training

Services

134

Index

Obsolete Part Number Listing

IND

EX

REMOVED LOCTITE® ITEM AVAILABLE REPLACEMENT LOCTITE® ITEM

IDH Number Product Description ProductNumber Product Description

10320 Loctite® 120042 Retaining Compound

18659 Loctite® 3091™ Medical Device Light Cure Adhesive

18870 Loctite® 3091™ Medical Device Light Cure Adhesive

20282 Loctite® 7453™ Accelerator

23692 Loctite® 3103™ Light Cure Adhesive 19890 N/A

24575 Loctite® Super Lube® Lubricant with PTFE

29345 Loctite® Hysol® U10-FL Urethane Adhesive

30507 Loctite® Instant Gasket 40479 Loctite® Instant Gasket

30541 Loctite® Superflex® Blue RTV Silicone Adhesive Sealant 40482 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant

30562 Loctite® Superflex® Clear RTV Silicone Adhesive Sealant 40481 Loctite® Superflex® Clear RTV, Silicone Adhesive Sealant

30563 Loctite® Superflex® Black RTV Silicone Adhesive Sealant 40464 Loctite® Superflex® Black RTV, Silicone Adhesive Sealant

30564Loctite® Superflex® Red High Temp RTV Silicone Adhesive Sealant

40465 Loctite® Superflex® Red High Temp RTV

30567Loctite® 587™ Blue, High Performance RTV SiliconeGasket Maker

40462Loctite® 587™ Blue, High Performance RTV SiliconeGasket Maker

30684 Loctite® Instant Gasket 40478 Loctite® Instant Gasket

31360 Krytox® RFE PFPE Lubricant 31361 Krytox® RFE PFPE Lubricant

38350Loctite® ViperLube® High Performance SyntheticLubricant, Gear Oil-90W

38351Loctite® ViperLube® High Performance SyntheticLubricant, Gear Oil-90W

38352Loctite® ViperLube® High Performance SyntheticLubricant, Lightweight Oil-10W





135

IND

EX

Ob

solete P

artN

umb

er Listing

REMOVED LOCTITE® ITEM AVAILABLE REPLACEMENT LOCTITE® ITEM

IDH Number Product Description ProductNumber Product Description



38877Loctite® ViperLube® High Performance SyntheticLubricant, Lightweight Oil – 20W

38878Loctite® ViperLube® High Performance SyntheticLubricant, Gear Oil – 140W



39363Loctite® ViperLube® Clear High Performance Synthetic Grease

39716 Loctite® Clover® Reel Sharp – 120 Grit

39727 Loctite® Clover® Reel Sharp – 150 Grit

40136 Loctite® Fixmaster® Concrete Repair

40141Loctite® 401™ Prism® Instant Adhesive,Surface Insensitive

40142 Loctite® Fixmaster® Concrete Repair

40143 Loctite® Fixmaster® MP Fast Setting Concrete Repair

40878 Loctite® H8500™ Speedbonder™




59866Loctite® 598™ Black, High Performance RTVSilicone Gasket Maker

40463Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker

61383 Loctite® PP Accelerator

82338 Loctite® Super Lube® Oil

82518 Loctite® Superflex® White RTV, Silicone Adhesive Sealant 40466 Loctite® Superflex® White RTV, Silicone Adhesive Sealant

98029 Loctite® Hysol™ 050-LITE Hot Melt Applicator 916281 Loctite® Hysol™ 050-LITE Hot Melt Applicator

98032 Loctite® Hysol™ 050-GAS Hot Melt Applicator 916268 Loctite® Hysol™ 050-GAS Hot Melt Applicator

7413762 Loctite® Thread Treatment Sticks Kit

136

IND

EX

Index

Listing by Item and Product NumberITEM/PART PRODUCT PAGENUMBER DESCRIPTION NUMBER

ITEM/PART PRODUCT PAGENUMBER DESCRIPTION NUMBER

E-00CL Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . . . . . . 24, 26E-05CL Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 26E-30CL Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . . 24, 26E-00NS Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 24, 26E-40FL Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26E-90FL Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26E-20HP Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 28E-60HP Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 28E-120HP Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 28E-214HP Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . 25, 27E-60NC Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive . . . . . . . . . . . 24, 26E-20NS Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . 25, 27M-11FL Loctite® M-11FL™ Hysol® Medical Device Urethane Adhesive . . . . . . . . . . . . . . . 124, 125M-121HP Loctite® M-121HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . 124, 125M-21HP Loctite® M-21HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 124, 125M-31CL Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 124, 125U-05FL Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 28U-09FL Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 26U-09LV Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . 25, 26D609 Loctite® D609™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26H3000 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . . 21, 23H3101 Loctite® H3101™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . . 21, 23H3151 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . 21, 23H3300 Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . 21, 23H4000 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . . 21, 23H4100 Loctite® H4100™ Speedbonder™ Structural Adhesive, Ultra Fast . . . . . . . . . . . . . . . . . . 23H4200 Loctite® H4200™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 23H4500 Loctite® H4500™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . 21, 23H4720 Loctite® H4720™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . 21, 23H4800 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 23H6051 Loctite® H6051™ Speedbonder™ Structural Adhesive, Plastic/Composite Bonder . . . 21, 23H8000 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 21, 23H8500 Loctite® H8500™ Speedbonder™ Structural Adhesive, High Toughness . . . . . . . . . . 21, 23H8600 Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . 21, 23MS930 Loctite® MS930™ Elastic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 55MS939 Loctite® MS939™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 55MS9360 Loctite® MS9360™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 550151 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . 24, 260232 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 110420 Loctite® 0420™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . . 8, 100430 Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . . 8, 100437 Loctite® 0437™ Hysol® SprayPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . 8, 100450 Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . . 8, 100452 Loctite® 0452™ Hysol® SprayPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . 8, 101C Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271C-LV Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271X Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 113X Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . 9, 116C Loctite® 6C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2611C Loctite® 11C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2650 Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 955 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114220 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . . . . 108, 109222 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . . 109222MS Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 106, 109232 Loctite® 232™ Retaining Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 94236 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 11242 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109243 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 109246 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 106, 109248 Loctite® QuickStix™ 248™ Threadlocker – Medium Strength . . . . . . . . . . . . . . . . 106, 109262 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 109266 Loctite® 266™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 109268 Loctite® QuickStix™ 268™ Threadlocker – High Strength . . . . . . . . . . . . . . . . . . 107, 109271 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109272 Loctite® 272™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 109277 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 107, 109290 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109

294 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 108, 109312 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22324 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 20, 22325 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . . 20, 22326 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . . 20, 22330 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22332 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . . 20, 22334 Loctite® 334™ Structural Adhesive, High Performance . . . . . . . . . . . . . . . . . . . . . . . 20, 22342 Loctite® 342™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 11349 Loctite® 349™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15352 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15363 Loctite® 363™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15366 Loctite® 366™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15380 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 4, 6382 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . 7392 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . . 20, 22401 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 6403 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . 4, 6404 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . 5, 7406 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 6408 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 6409 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . 7410 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . 6411 Loctite® 411™ Prism® Instant Adhesive, Clear/Toughened . . . . . . . . . . . . . . . . . . . . . 4, 6414 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7415 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7416 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7420 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7422 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7425 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 108, 109426 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 4, 6430 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7431 Loctite® 431™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6, 122, 123435 Loctite® 435™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 123438 Loctite® 438™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6444 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7454 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 6455 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . . 4, 6460 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 6480 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . . 6493 Loctite® 493™ Super Bonder® Instant Adhesive, Wicking Grade . . . . . . . . . . . . . . . . . . . . 7495 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . 5, 7496 Loctite® 496™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . 7498 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . . . . 5, 7499 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . 7504 Loctite® 504™ Gasket Eliminator® Flange Sealant, Gap Filling . . . . . . . . . . . . . . 50, 52, 53509 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . 50, 52, 53510 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . . . . . 50, 52, 53515 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53518 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53534 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing . . . . . . . . . . . . . . . . . . . . . 51, 52, 53542 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114545 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 112, 114548 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53549 Loctite® 549™ Instant Seal Plastic Gasket Thread Sealant . . . . . . . . . . . . . . . . . . . . . . . . 52554 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 113, 114560 Loctite® 560™ Thread Sealant, Large Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114561 Loctite® QuickStix™ 561™ PST® Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114564 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114565 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 114567 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 114568 Loctite® 568™ Flange Sealant, Plastic Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52569 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114571 Loctite® 571™ Thread Sealant, Pipe Sealant HVV . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114572 Loctite® 572™ Thread Sealant, Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114573 Loctite® 573™ Flange Sealant, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52574 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52577 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114

Items listed in RED are TOP CHOICE Selections

137

IND

EX

Listing b

y Item and

Pro

duct N

umb

er

579 Loctite® 579™ Thread Sealant, Instant Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114580 Loctite® 580™ PST® Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . 113, 114587 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . 57, 59592 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114598 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 59603 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . . . . . . . . . 92, 94608 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 26609 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 94615 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26620 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 94635 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . . . 93, 94638 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . . . . 93, 94640 Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temperature . . . . 94641 Loctite® 641™ Retaining Compound, Press & Slip Fit/Controlled Strength . . . . . . . . . 93, 94648 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . 92, 94660 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . 93, 94668 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . . . 92, 94675 Loctite® 675™ Retaining Compound, Press Fit/Medium Strength . . . . . . . . . . . . . . . . . . . 94680 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 94712 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99713 Loctite® 713™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123740 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 11740LV Loctite® 740LV™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . 11768 Loctite® 768™ X-NMS Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103770 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99793 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99907 Loctite® 907™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261942 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 812432 Loctite® 2432™ Threadlocker, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . . 106, 1092440 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 106, 1092760 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 107, 1093030 Loctite® 3030™ Adhesive, Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233032 Loctite® 3032™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 233034 Loctite® 3034™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 233100 Loctite® 3100™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153102 Loctite® 3102™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153103 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153104 Loctite® 3104™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153105 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153106 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153107 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153108 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153140 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose . . . . . . . . . . . . . . . . . . . . . . . 76, 783141 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature . . . . . . . . . . . . . . . . . . . . . . 76, 783142 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive . . . . . . . . . . . . . . . . . . . 76, 783145 Loctite® 3145™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . . . . . 76, 793160 Loctite® 3160™ Hysol® Epoxy Hardener, Glossy Surface Finish . . . . . . . . . . . . . 76, 78, 793162 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 793163 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . . . . . 76, 78, 793164 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . . . . . 76, 78, 793165 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . . . . . 76, 78, 793173 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . . . . . 76, 773175 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153182 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . 76, 773183 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . . . . . . 76, 773184 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant . . . . . . . . . . . . . . . 76, 773201 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 1213211 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 1213301 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213311 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213321 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213335 Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 143336 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 143337 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 143340 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 143341 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 1213345 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213355 Loctite® 3355™ Light Cure Adhesive, Pre-Activated Epoxy . . . . . . . . . . . . . . . . . . . . 12, 143381 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . 120, 1213407 Loctite® 3407™ OptiLOC® Fiber Optic Adhesive, Silicone/Heat Cure . . . . . . . . . . . . . . . . 583491 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153492 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153493 Loctite® 3493™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153494 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153525 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153526 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 153552 Loctite® 3552™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 1213553 Loctite® 3553™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 1213631 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . . . 8, 103650 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . 813651 Loctite® 3651™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . 8, 10, 813751 Loctite® 3751™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3761 Loctite® 3761™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153911 Loctite® 3911™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213912 Loctite® 3912™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213913 Loctite® 3913™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213921 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213922 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213924 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213926 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 1213933 Loctite® 3933™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213936 Loctite® 3936™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213941 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 1213942 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 1213943 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 1213944 Loctite® 3944™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213971 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 1213972 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 1213981 Loctite® 3981™ Hysol® Epoxy Adhesive,

High Performance/Various Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28, 124, 1253982 Loctite® 3982™ Hysol® Epoxy Adhesive,


High Performance/Various Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28, 124, 1253985 Loctite® 3985™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 284011 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . 122, 1234013 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234014 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234031 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234046 Loctite® 4046™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 114061 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234081 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234161 Loctite® 4161™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234203 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . 64204 Loctite® 4204™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . 5, 64205 Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . 64206 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234306 Loctite® 4306™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . 5, 6, 12, 14, 122, 1234307 Loctite® 4307™ Flashcure® Light Cure Adhesive, Instant . . . . . . . . . 5, 6, 12, 14, 122, 1234541 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234601 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234851 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 1234861 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 1234981 Loctite® 4981™ Super Bonder® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . 1235031 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . 12, 14, 80, 815033 Loctite® 5033™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . 12, 145039 Loctite® 5039™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . 12, 14, 56, 585040 Loctite® 5040™ RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 815045 Loctite® 5045™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585083 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . 145091 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . . . 14, 815127 Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . 525182 Loctite® 5182™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525240 Loctite® 5240™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 1255248 Loctite® 5248™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 1255600 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585699 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 595772 Loctite® 5772™ Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . 113, 1145900 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone . . . . . . . . . . . . . . . . . . . . . 56, 585905 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58, 595910 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585920 Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . . . . . . . 56, 58, 595950 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585951 Loctite® 5951™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585960 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585963 Loctite® 5963™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 585964 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 585999 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Performance RTV Silicone . . 56, 586002 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 117075 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997090 Loctite® 7090™ Primer, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 997109 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 997113 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997380 Loctite® 7380™ Depend® Activator, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997387 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997451 Loctite® 7451™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237452 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997460 Loctite® 7460™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . 9, 107471 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 997500 Loctite® 7500™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . 9, 107649 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 1097701 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . 122, 1237804 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107804FRM-HV Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10




138

IND

EX

List

ing

by

Item

and

Pro

duc

t N

umb

erITEM/PART PRODUCT PAGENUMBER DESCRIPTION NUMBER



7809FR Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 9, 10, 817811 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . 9, 10, 817901 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . 9, 10, 80, 817951 Loctite® 7951™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 999340 Loctite® 9340™ Hysol® Epoxy Adhesive High Temperature . . . . . . . . . . . . . . . . . . . . 25, 279412 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269430 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 25, 289432NA Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 25, 279433 Loctite® 9433™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 289437 Loctite® 9437™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279459 Loctite® 9459™ Hysol® Epoxy Adhesive, High Temperature Resistance . . . . . . . . . . 25, 279460 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 289460F Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289460PB Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289462 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289739 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2700101 Loctite® Quick Service Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11700112 Loctite® O-Ring Making Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11700144 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2203333 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211505 Loctite® 560™ Thread Sealant, Large Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11411782 Loctite® 560™ Thread Sealant, Large Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11412224 Loctite® 366™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1512292 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 712294 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 712695 Loctite® 7090™ Primer, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9917412 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . . . 14, 8117421 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . . 4, 617430 Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . 5217451 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 4, 617528 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . 1417529 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 4, 617635 Loctite® 5083™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . 1417944 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1518010 Loctite® 5182™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5218013 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318014 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318030 Loctite® 409™ Super Bonder® Instant Adhesive Gel, Industrial Grade . . . . . . . . . . . . . . . 718074 Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . . . 14, 8118198 Loctite® 5951™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5818390 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9918396 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918397 Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918398 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 4, 618490 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918495 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5818575 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918576 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918580 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918581 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 5918582 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 5918583 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 5918607 Loctite® 232™ Retaining Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9418636 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9918637 Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918650 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9918666 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1518680 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . 122, 12318681 Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . 122, 12318682 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318683 Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318686 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318687 Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318688 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318689 Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318690 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318691 Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318692 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318693 Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12318694 Loctite® 4981™ Super Bonder® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . 12318695 Loctite® 4981™ Super Bonder® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . 12318718 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 5918751 Loctite® 3493™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1518861 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9918862 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919266 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 10919267 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919268 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919269 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 10919368 Loctite® 7090™ Primer, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9919605 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919606 Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919727 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 121

19728 Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 12119730 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 12119731 Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . 120, 12119733 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119734 Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119736 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119737 Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119739 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119740 Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12119743 Loctite® 4161™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12319744 Loctite® 4161™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12319822 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919824 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919861 Loctite® 3101™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1519862 Loctite® 3100™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1519886 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . 122, 12319887 Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . 122, 12319889 Loctite® 713™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12319890 Loctite® 7451™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . 12319907 Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9919987 Loctite® 5248™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 12520162 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10320166 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone . . . . . . . . . . . . . . . . . . . . . 56, 5820167 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone . . . . . . . . . . . . . . . . . . . . . 56, 5820168 Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone . . . . . . . . . . . . . . . . . . . . . 56, 5820170 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Performance RTV Silicone . . 56, 5820246 Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9920251 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2220252 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2220253 Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2220260 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10320268 Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12320269 Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12320279 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser, Fragrance-Free . . 100, 102, 10320352 Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9920419 Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 720420 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . 721088 Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9921347 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 10921348 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 10921349 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9921359 Loctite® 3761™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1521360 Loctite® 3761™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1521362 Loctite® 3751™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1521363 Loctite® 3751™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1521425 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8921426 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8921427 Loctite® Fixmaster® General Purpose Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . 87, 88, 8921433 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 10921434 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 107, 10921440 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . . . . . . . . . 92, 9421441 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . . . . . . . . . 92, 9421442 Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . . . . . . . . . 92, 9421443 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . 92, 9421444 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . 92, 9421445 Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . 92, 9421447 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . . . . 93, 9421448 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . . . . 93, 9421449 Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . . . . 93, 9421453 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11421454 Loctite® 572™ Thread Sealant, Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11421456 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11421457 Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11421458 Loctite® 641™ Retaining Compound, Press & Slip Fit/Controlled Strength . . . . . . . . . 93, 9421463 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . . 10921464 Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . . 10921472 Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . . . . . . . 56, 58, 5921525 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . 50, 52, 5321744 Loctite® 5999™ Flange Sealant, Heavy Body/Grey

High Performance RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5821746 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5821747 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5821748 Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5821921 Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . 4, 621922 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . 721924 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . 721925 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 622041 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . . . . 108, 10922205 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 106, 10922221 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 106, 10922231 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 106, 10922241 Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . 106, 10922309 Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . . 4, 6

139

IND

EX

Listing b

y Item and

Pro

duct N

umb

er

22355 Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10322423 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5322424 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5322440 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9922477 Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9922671 Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9923034 Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9923440 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12123690 Loctite® 3102™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1523691 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523692 Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523693 Loctite® 3104™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1523694 Loctite® 3104™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1523695 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523696 Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523697 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523698 Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1523792 Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12123811 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser, Fragrance-Free . . 100, 102, 10323977 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 10924018 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5224077 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 10924078 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 10924079 Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . 106, 10924205 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 10924221 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 10924231 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 10924241 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 10924243 Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 10924379 Loctite® Electrical Contact Cleaner, Non-Flammable . . . . . . . . . . . . . . . . . . . 101, 102, 10324690 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . 120, 12124707 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5825062 Loctite® Anaerobic Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9925523 Loctite® 2432™ Threadlocker, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . . 106, 10925524 Loctite® 5772™ Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . 113, 11425785 Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . 120, 12125791 Loctite® Electrical Contact & Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10325882 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 113, 11426205 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 10926221 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 10926231 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 10926241 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 10926243 Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . 107, 10926324 Loctite® 4204™ Prism® Instant Adhesive, Thermally Resistant . . . . . . . . . . . . . . . . . . . 5, 626325 Loctite® 4204™ Prism® Instant Adhesive, Thermally Resistant . . . . . . . . . . . . . . . . . . . 5, 626338 Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5226392 Loctite® 573™ Flange Sealant, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5226772 Loctite® 266™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10926773 Loctite® 266™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10926774 Loctite® 266™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10927105 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 10927121 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 10927131 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 10927141 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 10927143 Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 10927240 Loctite® 272™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10927270 Loctite® 272™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10927285 Loctite® 272™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . 107, 10927731 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 107, 10927741 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 107, 10927743 Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . 107, 10927858 Loctite® 7951™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 9927863 Loctite® 232™ Retaining Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 9427934 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 108, 10927935 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 108, 10927936 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 108, 10927937 Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . 108, 10928026 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . 628027 Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . 628028 Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . 628029 Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . 628030 Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . 628298 Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Performance RTV Silicone . . 56, 5828366 Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528367 Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528368 Loctite® 3493™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1528400 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528419 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528465 Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528466 Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1528628 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12328629 Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12328654 Loctite® Form-A-Thread® Stripped Thread Repair Kit . . . . . . . . . . . . . . . . . . . . . . 116, 117

28754 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11428755 Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11428802 Loctite® 641™ Retaining Compound, Press & Slip Fits/Controlled Strength . . . . . . . . 93, 9429005 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 10929021 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 10929031 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 10929041 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 10929043 Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 10929287 Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5829289 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629290 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629291 Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629294 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629295 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629296 Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629299 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 2629300 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 2629301 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 2629302 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 2629303 Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 24, 2629304 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629305 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629306 Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629309 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629310 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629311 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629312 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629313 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2629314 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 2829315 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 2829316 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 2829317 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 2829318 Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . 25, 2829319 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 2829320 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 2829321 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 2829322 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 2829323 Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 25, 2829324 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive . . . . . . . . 24, 26, 7729325 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive . . . . . . . . 24, 26, 7729326 Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive . . . . . . . . 24, 26, 7729329 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . . 24, 2629330 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . . 24, 2629331 Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . . 24, 2629334 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . 25, 2729335 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . 25, 2729336 Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . 25, 2729339 Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . 25, 2729340 Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . 25, 2729348 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 2829349 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 2829350 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 2829351 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 2829352 Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . 25, 2829353 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 2829354 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 2829355 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 2829356 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 2829357 Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . 25, 2829370 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 2629371 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 2629460 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 2629461 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 2629462 Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . 24, 2629487 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1529505 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1529506 Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1529513 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 106, 10929514 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 106, 10929515 Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . 106, 10929709 Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6829710 Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6829711 Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6830138 Krytox® RFE Advanced PTFE Dry Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6830220 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1530221 Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1530287 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . 93, 9430288 Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1430289 Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1430507 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5930509 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5930510 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330511 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53




140

IND

EX

List

ing

by

Item

and

Pro

duc

t N

umb

er

30512 Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330513 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330514 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330515 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330516 Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330517 Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330518 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . 57, 5930521 Loctite® Pro Strength Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 10330522 Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6930523 Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6930524 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330525 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330526 Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330527 Loctite® Belt Dressing & Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3530529 Loctite® Pro Strength Varnish Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10330530 Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6930533 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . 57, 5930534 Loctite® Thread Sealant with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11430535 Loctite® Copper Gasket Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330536 Loctite® Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6930537 Loctite® Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 1930538 Loctite® Heavy-Duty Rubberized Undercoating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3530539 Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3530540 Loctite® Black Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 1930542 Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . . . . . . . 56, 58, 5930543 Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6930544 Loctite® All-Purpose Spray Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 1930545 Loctite® Non-Chlorinated Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10330546 Loctite® Multi-Purpose Glass Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10330548 Loctite® Pro Strength Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10330556 Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11430557 Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11430558 Loctite® High Temperature Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5330560 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . 57, 5930561 Loctite® Thread Sealant with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11430565 Loctite® Aqua Power® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . 100, 102, 10330671 Loctite® M-21HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 124, 12530673 Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 124, 12530674 Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . 124, 12530678 Loctite® M-11FL™ Hysol® Medical Device Urethane Adhesive . . . . . . . . . . . . . . . 124, 12530680 Loctite® M-121HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . 124, 12530688 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12130756 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1530764 Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1530765 Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1531064 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1431065 Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 1431132 Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5831231 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231243 Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2231279 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1031291 Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . . . 8, 1031297 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . 8131302 Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . 8131303 Loctite® 3651™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . 8, 10, 8131361 Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6831362 Loctite® Manufacturing Reliability Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11732037 Loctite® 3936™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12132040 Loctite® 3933™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12132047 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12132083 Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12132084 Loctite® 3933™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12132304 Loctite® 3936™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12132429 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 112, 11432430 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 20, 2232490 Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . 20, 2232525 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 107, 10932526 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 107, 10932527 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 107, 10932528 Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . 107, 10932530 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . . 20, 2232586 Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . . 20, 2232629 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . . 20, 2232685 Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . . 20, 2233058 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2233064 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2233081 Loctite® 330™ Depend® Adhesive, No-Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 2233201 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . . 20, 2233241 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 11433275 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . . 20, 2233290 Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . . 20, 2233403 Loctite® 334™ Structural Adhesive, High Performance . . . . . . . . . . . . . . . . . . . . . . . 20, 22

33417 Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12133470 Loctite® 334™ Structural Adhesive, High Performance . . . . . . . . . . . . . . . . . . . . . . . 20, 2233486 Loctite® Maintenance Tackle Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11733510 Loctite® Fixmaster® Super Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4733946 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 106, 10933947 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 106, 10933948 Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . 106, 10934018 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 5934026 Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6534337 Loctite® 5963™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5834347 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5834348 Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5834395 Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6534517 Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6534518 Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6534663 Loctite® Chisel® MC-Free Gasket Remover . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10334731 Loctite® 3985™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2834894 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534895 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534896 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534897 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534931 Loctite® 349™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1534943 Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 101, 102, 10334944 Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 101, 102, 10334979 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534980 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534981 Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534982 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534983 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534984 Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534985 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534986 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534987 Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534988 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534989 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534990 Loctite® 349™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1534991 Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . . . 34, 3534994 Loctite® Primer for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . 34, 3534995 Loctite® Thinner for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . 34, 3535082 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11435173 Loctite® 3407™ OptiLOC® Fiber Optic Adhesive, Silicone/Heat Cure . . . . . . . . . . . . . . . . 5835241 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1535286 Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 1535939 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 21, 2335940 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 21, 2336045 Loctite® Big Foot™ Acrylic Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4336057 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1436058 Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1436132 Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5936160 Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . 21, 2336294 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12136295 Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12136331 Loctite® 363™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1536334 Loctite® Magna-Crete Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4636390 Loctite® 363™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1536437 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136476 Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136478 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136480 Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136481 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136483 Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates . . . . . 120, 12136484 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12136485 Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12136488 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12136489 Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . 120, 12136492 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136493 Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136536 Loctite® 3911™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136537 Loctite® 3911™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136539 Loctite® 3912™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136540 Loctite® 3912™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136631 Loctite® 366™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1536646 Loctite® Non-Flammable Contact Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10336766 Loctite® 3981™ Hysol® Epoxy Adhesive,



High Performance/Various Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28, 124, 12536780 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6936781 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6936782 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 69




141

IND

EX

Listing b

y Item and

Pro

duct N

umb

er

36783 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6936784 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6936786 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6936791 Loctite® 3913™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136792 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12136804 Loctite® 3913™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12136805 Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . 120, 12136906 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1436907 Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . 12, 1436923 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5837061 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6937087 Loctite® QuickStix™ 248™ Threadlocker – Medium Strength . . . . . . . . . . . . . . . 106, 10937127 Loctite® QuickStix™ 561™ PST® Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11437220 Loctite® 3030™ Adhesive, Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2337229 Loctite® QuickStix™ C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . 62, 64, 6537230 Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6537297 Loctite® 3981™ Hysol® Epoxy Adhesive,



High Performance/Various Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28, 124, 12537312 Loctite® Maximum Strength Headliner Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 1937316 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4737388 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . . . . 108, 10937439 Loctite® 4306™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 12337441 Loctite® 4307™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 12337442 Loctite® 4306™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 12337443 Loctite® 4307™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 12337535 Loctite® Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6937684 Loctite® QuickStix™ 248™ Threadlocker – Medium Strength . . . . . . . . . . . . . . . . 106, 10937685 Loctite® QuickStix™ 268™ Threadlocker – High Strength . . . . . . . . . . . . . . . . . . 107, 10937686 Loctite® QuickStix™ 268™ Threadlocker – High Strength . . . . . . . . . . . . . . . . . . . 107, 10937708 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12337710 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6937711 Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12337719 Loctite® Fixmaster® Instant Belt Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8537732 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12337733 Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12337795 Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11438004 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 4, 638050 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 4, 638061 Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . 4, 638181 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6538203 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . 738210 Loctite® 3944™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12138212 Loctite® 3944™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12138240 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . 738261 Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . 738402 Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 10938535 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58, 5938584 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6538588 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . 25, 2638589 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . 25, 2638590 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . 25, 2638591 Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . 25, 2638760 Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . 21, 2338761 Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . 21, 2338762 Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . 21, 2338956 Loctite® Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11739011 Loctite® H4720™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . 21, 2339036 Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11439062 Loctite® Reliability Tacklebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11739088 Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8939136 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4739146 Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . 66, 68, 6939147 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . . . 92, 9439148 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . . . 92, 9439149 Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . . . 92, 9439151 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5339152 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5339153 Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5339155 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing . . . . . . . . . . . . . . . . . . . . . 51, 52, 5339156 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing . . . . . . . . . . . . . . . . . . . . . 51, 52, 5339157 Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing . . . . . . . . . . . . . . . . . . . . . 51, 52, 5339186 Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . . . . 108, 10939202 Loctite® QuickTite® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739222 Loctite® QuickStix™ C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . 62, 64, 6539223 Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6539250 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . . 20, 2239275 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . . 20, 2239280 Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . . 20, 22

39312 Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2639341 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . . . 66, 68, 6939342 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . . . 66, 68, 6939364 Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . . . 66, 68, 6939366 Loctite® Fixmaster® Concrete Repair . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47, 86, 88, 8939395 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . . . . . 76, 78, 7939397 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant . . . . . . . . . . . . . . . 76, 7739398 Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant . . . . . . . . . . . . . . . 76, 7739401 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339404 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339406 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339413 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339418 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339426 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339428 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339431 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339439 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339441 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339444 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339452 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339455 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339457 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339458 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339463 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339465 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339466 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339468 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339473 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339476 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339478 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339479 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339483 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339486 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339488 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339499 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339504 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339510 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339512 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339515 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339523 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339528 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339536 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339541 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339542 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339549 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339551 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339554 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339561 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339566 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339574 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339579 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339587 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339589 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339590 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339592 Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339598 Loctite® Clover® Duplex Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339633 Loctite® Fixmaster® Rapid Rubber Repair Static Mixers . . . . . . . . . . . . . . . . . . . . . . . . . 8539635 Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8539636 Loctite® Fixmaster® Flex™ Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8439637 Loctite® Fixmaster® Fast Set Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4739643 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6539711 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339712 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339715 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339723 Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 7339893 Loctite® C-200® High Temperature Solid Film Lubricant . . . . . . . . . . . . . . . . . . . . . . 67, 6939894 Loctite® C-200® High Temperature Solid Film Lubricant . . . . . . . . . . . . . . . . . . . . . . 67, 6939895 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6939896 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6939897 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6939898 Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6939901 Loctite® Zinc Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6539904 Loctite® Thread Sealing Tape with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11439916 Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5939917 Loctite® Fixmaster® Fast Set Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8939918 Loctite® Nordbak® High Impact Wearing Compound . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3939944 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose . . . . . . . . . . . . . . . . . . . . . . . 76, 7839945 Loctite® 3140™ Hysol® Epoxy Resin, General Purpose . . . . . . . . . . . . . . . . . . . . . . . 76, 7839947 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature . . . . . . . . . . . . . . . . . . . . . . 76, 7839948 Loctite® 3141™ Hysol® Epoxy Resin, High Temperature . . . . . . . . . . . . . . . . . . . . . . 76, 7839950 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive . . . . . . . . . . . . . . . . . . . 76, 7939951 Loctite® 3142™ Hysol® Epoxy Resin, Thermally Conductive . . . . . . . . . . . . . . . . . . . 76, 79




142

IND

EX

List

ing

by

Item

and

Pro

duc

t N

umb

er

39958 Loctite® 3160™ Hysol® Epoxy Hardener, Glossy Surface Finish . . . . . . . . . . . . . 76, 78, 7939960 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 7939962 Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 7939964 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . . . . . 76, 78, 7939965 Loctite® 3162™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . . . . . 76, 78, 7939966 Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . . . . . 76, 78, 7939969 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . . . . . 76, 78, 7939970 Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . . . . . 76, 78, 7939973 Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . . . . . 76, 78, 7939984 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . . . . . 76, 7739985 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . . . . . 76, 7739986 Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . . . . . 76, 7739995 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . 76, 7739996 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . 76, 7739997 Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . 76, 7739998 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . . . . . . 76, 7739999 Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . . . . . . 76, 7740086 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . 12, 14, 80, 8140087 Loctite® 5031™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . 12, 14, 80, 8140088 Loctite® 5033™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . 12, 1440089 Loctite® 5033™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . 12, 1440104 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640140 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640161 Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640270 Loctite® Fixmaster® Magna-Crete Winter Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 4640271 Loctite® Fixmaster® Magna-Crete Summer Additive . . . . . . . . . . . . . . . . . . . . . . . . . 45, 4640302 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4340303 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4340304 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . 4, 640340 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . 4, 640346 Loctite® Fixmaster® Crack Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4740347 Loctite® Fixmaster® Flexible Joint Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4740352 Loctite® Big Foot™ Low Profile Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4340361 Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . 4, 640404 Loctite® 5040™ RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 8140405 Loctite® 5040™ RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 8140407 Loctite® 5040™ RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 8140408 Loctite® 5045™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5840409 Loctite® 5045™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5840438 Loctite® 5039™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . 12, 14, 56, 5840439 Loctite® 5039™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . 12, 14, 56, 5840462 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . 57, 5940463 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 5940464 Loctite® Superflex® Black RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5940465 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . 57, 5940466 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5940478 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5940479 Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 5940481 Loctite® Superflex® Clear RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5940482 Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . 57, 5940488 Loctite® O-Ring Making Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11740505 Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . 56, 58, 5940511 Loctite® 3145™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . . . . . 76, 7940512 Loctite® 3145™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . . . . . 76, 7940515 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5840578 Loctite® Under Pressure Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11740579 Loctite® Under Pressure Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11740590 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3940591 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3940592 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3940604 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640640 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640661 Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . 4, 640724 Loctite® 5045™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5840759 Loctite® 3032™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 2340760 Loctite® 3032™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 2340792 Loctite® 3355™ Light Cure Adhesive, Pre-Activated Epoxy . . . . . . . . . . . . . . . . . . . . 12, 1440793 Loctite® 3355™ Light Cure Adhesive, Pre-Activated Epoxy . . . . . . . . . . . . . . . . . . . . 12, 1440840 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 640861 Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 640870 Loctite® 3985™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2840875 Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . 21, 2340884 Loctite® H8500™ Speedbonder™ Structural Adhesive, High Toughness . . . . . . . . . . 21, 2340888 Loctite® H8500™ Speedbonder™ Structural Adhesive, High Toughness . . . . . . . . . . 21, 2340889 Loctite® H8500™ Speedbonder™ Structural Adhesive, High Toughness . . . . . . . . . . 21, 2340900 Loctite® Fixmaster® Superior Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8940904 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . 740945 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . 740969 Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5840971 Loctite® 3552™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 12140972 Loctite® 3552™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 12140973 Loctite® 3553™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 121

40974 Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . 740977 Loctite® 3553™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . 13, 15, 120, 12140994 Loctite® 435™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12340995 Loctite® 435™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12340996 Loctite® 438™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640997 Loctite® 438™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641004 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . 641005 Loctite® 435™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 12341006 Loctite® 438™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641045 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . 641061 Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . 641104 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . . . . 4, 641145 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . . . . 4, 641161 Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . . . . 4, 641205 Loctite® QuickStix™ Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6541254 Loctite® 431™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6, 122, 12341255 Loctite® 431™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6, 122, 12341256 Loctite® 431™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6, 122, 12341327 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5841378 Loctite® MS930™ Elastic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541379 Loctite® MS9360™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541380 Loctite® MS939™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541382 Loctite® MS939™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541383 Loctite® MS930™ Elastic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541384 Loctite® MS9360™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541385 Loctite® MS930™ Elastic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541386 Loctite® MS9360™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541387 Loctite® MS939™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 5541404 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741450 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741461 Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741550 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741561 Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741650 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741661 Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741732 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 5842050 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742061 Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742197 Loctite® 5240™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 12542198 Loctite® 5240™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 12542200 Loctite® 5240™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . 124, 12542250 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742261 Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742540 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 108, 10942561 Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . 108, 10943004 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 743050 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 743061 Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 745404 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 645440 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 645474 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 645478 Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . 4, 646004 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 646040 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 646061 Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . 646548 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . 5, 746551 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . 5, 746561 Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . 5, 748040 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . . 648061 Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . . 649350 Loctite® 493™ Super Bonder® Instant Adhesive, Wicking Grade . . . . . . . . . . . . . . . . . . . . 749361 Loctite® 493™ Super Bonder® Instant Adhesive, Wicking Grade . . . . . . . . . . . . . . . . . . . . 749504 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . 5, 749550 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . 5, 749561 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . 5, 749595 Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . 5, 749650 Loctite® 496™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . 749661 Loctite® 496™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . 749850 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . . . . 5, 749861 Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . . . . 5, 749904 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . . 749945 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . . 749974 Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . . 750441 Loctite® 504™ Gasket Eliminator® Flange Sealant, Gap Filling . . . . . . . . . . . . . . 50, 52, 5350480 Loctite® 504™ Gasket Eliminator® Flange Sealant, Gap Filling . . . . . . . . . . . . . . 50, 52, 5350965 Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . 50, 52, 5351001 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551002 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551003 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551004 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551005 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551006 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65




143

IND

EX

Listing b

y Item and

Pro

duct N

umb

er

51007 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551008 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551009 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551011 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551031 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . . . . . 50, 52, 5351041 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . . . . . 50, 52, 5351048 Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551049 Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551050 Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551074 Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . . . . . 50, 52, 5351084 Loctite® Graphite-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551094 Loctite® Moly-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551102 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551115 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551116 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551117 Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551144 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551145 Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551146 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551147 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551152 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551168 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551170 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551171 Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551211 Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3551213 Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3551221 Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6951242 Loctite® Extreme Pressure Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6951243 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551245 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551246 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551252 Loctite® Food Grade Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6951269 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551270 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551272 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551273 Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551277 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551286 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551299 Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6551346 Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551360 Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6951387 Loctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . 57, 5951388 Loctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . 57, 5951517 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5351531 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5351572 Loctite® High Performance N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . 63, 64, 6551580 Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5351604 Loctite® Tight®, Multipurpose Anaerobic Gel . . . . . . . . . . . . . . . . . . . . . 108, 109, 113, 11451605 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551606 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551607 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551608 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551609 Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 6551642 Loctite® Tight®, Multipurpose Anaerobic Gel . . . . . . . . . . . . . . . . . . . . . 108, 109, 113, 11451817 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5351831 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5351845 Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . 50, 52, 5354505 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 112, 11454531 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 112, 11454541 Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . 112, 11454941 Loctite® 549™ Instant Seal Plastic Gasket Thread Sealant . . . . . . . . . . . . . . . . . . . . . . . . 5255441 Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . 113, 11456507 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456531 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456541 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456543 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456566 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456571 Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . 112, 11456707 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 11456747 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 11456765 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 11456790 Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . 112, 11456841 Loctite® 568™ Flange Sealant, Plastic Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5256931 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11456941 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11456943 Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11457141 Loctite® 571™ Thread Sealant, Pipe Sealant HVV . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11457941 Loctite® 579™ Thread Sealant, Instant Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11458031 Loctite® 580™ PST® Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . 113, 11458730 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . 57, 5958775 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . 57, 5958791 Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . 57, 59

59214 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11459231 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11459241 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11459243 Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . 112, 11459330 Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959375 Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959430 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959475 Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959530 Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959575 Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 5959630 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . 57, 5959675 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . 57, 5959830 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 5959875 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 5959891 Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . 57, 5960905 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 9460921 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 9460931 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 9460941 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 9460943 Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . 92, 9462005 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 9462015 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 9462040 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 9462070 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 9462085 Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . 92, 9463531 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . . . 93, 9463541 Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . . . 93, 9464031 Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temperature . . . . 9464041 Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temperature . . . . 9466010 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . 93, 9466040 Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . 93, 9467541 Loctite® 675™ Retaining Compound, Press Fit/Medium Strength . . . . . . . . . . . . . . . . . . . 9468005 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 9468015 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 9468035 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 9468060 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 9468090 Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . 93, 9475430 Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3575448 Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3575465 Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3576732 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6576759 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6576764 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6576775 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6576820 Loctite® 768™ X-NMS Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10376871 Loctite® 768™ X-NMS Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10377124 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6577164 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6577175 Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6579040 Loctite® Chisel® Gasket Remover (Methylene Chloride) . . . . . . . . . . . . . . . . . 101, 102, 10380032 Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6980206 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6580209 Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 6580724 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11480725 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11480726 Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11480964 Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 5381120 Loctite® Fixmaster® Poxy Pak™, Fast Cure Epoxy . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8981204 Loctite® Maintain® Lubricant Penetrant, Moisture Displacer & Rust Preventer . . . . . . 67, 6981246 Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6981251 Loctite® Gear, Chain and Cable Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 6981252 Loctite® Solvo-Rust® Super Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 6981716 Loctite® Industrial Strength Paint Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 10382039 Loctite® Cold Galvanizing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3582046 Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . . . . . . . 56, 58, 5982093 Loctite® Fixmaster® Underwater Repair Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8982244 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382249 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382251 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382253 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382254 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382255 Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . 100, 102, 10382279 Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . 57, 5982480 Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11482481 Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 11483000 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . 21, 2383001 Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . 21, 2383006 Loctite® H3101™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . 21, 2383007 Loctite® H3101™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . 21, 2383014 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . 21, 2383015 Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . 21, 2383019 Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . 21, 23




144

IND

EX

List

ing

by

Item

and

Pro

duc

t N

umb

er

83020 Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . 21, 2383022 Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . 21, 2383024 Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . 21, 2383025 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . . 21, 2383028 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . . 21, 2383031 Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . . 21, 2383032 Loctite® H4100™ Speedbonder™ Structural Adhesive, Ultra Fast . . . . . . . . . . . . . . . 21, 2383038 Loctite® H4200™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 2383041 Loctite® H4500™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . 21, 2383045 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 2383046 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 2383047 Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . 21, 2383062 Loctite® H6051™ Speedbonder™ Structural Adhesive, Plastic/Composite Bonder . . . 21, 2383063 Loctite® H6051™ Speedbonder™ Structural Adhesive, Plastic/Composite Bonder . . . 21, 2383065 Loctite® H6051™ Speedbonder™ Structural Adhesive, Plastic/Composite Bonder . . . 21, 2383069 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683075 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683082 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683083 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683086 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683087 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683088 Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . 24, 2683089 Loctite® D609™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683094 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683095 Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683098 Loctite® 907™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683104 Loctite® 9340™ Hysol® Epoxy Adhesive High Temperature . . . . . . . . . . . . . . . . . . . . 25, 2783105 Loctite® 9340™ Hysol® Epoxy Adhesive High Temperature . . . . . . . . . . . . . . . . . . . . 25, 2783107 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683108 Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683113 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 25, 2883114 Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . 25, 2883119 Loctite® 9433™ Hysol® Epoxy Adhesive, Self-Leveling . . . . . . . . . . . . . . . . . . . . . . . 25, 2883126 Loctite® 9459™ Hysol® Epoxy Adhesive, High Temperature Resistance . . . . . . . . . . 25, 2783127 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883128 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883129 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883130 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883131 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883133 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883134 Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2883135 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883142 Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883149 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783150 Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783176 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683178 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683179 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683180 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683181 Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . 24, 2683183 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783186 Loctite® 11C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683200 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783201 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783202 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783206 Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783207 Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783208 Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783211 Loctite® 6C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2683216 Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783217 Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . 25, 2783224 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883225 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883226 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883227 Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883230 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883231 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883232 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883233 Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2883237 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183239 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183241 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183244 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183245 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183246 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183247 Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183251 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183252 Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183255 Loctite® 342™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183257 Loctite® 0452™ Hysol® SprayPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . 8, 1083260 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183261 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

83263 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183264 Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . 1183266 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183267 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183268 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183269 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183271 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183272 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183273 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183274 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . .9, 11, 80, 8183275 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183276 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183277 Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . 9, 11, 80, 8183278 Loctite® 4046™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183279 Loctite® 4046™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183283 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183285 Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183308 Loctite® 7460™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . 9, 1083312 Loctite® 7500™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . 9, 1083313 Loctite® 7500™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . 9, 1083325 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083326 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083327 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083328 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083329 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083330 Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083337 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . 9, 10, 8183339 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . 9, 10, 8183340 Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . 9, 10, 8183341 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . 9, 10, 80, 8183342 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . 9, 10, 80, 8183343 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . 9, 10, 80, 8183344 Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . 9, 10, 80, 8183346 Loctite® 0420™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083348 Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083349 Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083350 Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . 1083351 Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . 1083352 Loctite® 0437™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083353 Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083354 Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . 8, 1083355 Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . 1083356 Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . 1083357 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183358 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183359 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183360 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183362 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183364 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183365 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183367 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183368 Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 1183369 Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . 9, 1183370 Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . 9, 1183373 Loctite® 740LV™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . 1183374 Loctite® 740LV™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . 1183382 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083383 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083384 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083386 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083387 Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1083388 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 9, 10, 8183390 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 9, 10, 8183391 Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . 9, 10, 8183393 Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183394 Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183395 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183397 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183398 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183399 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183400 Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . 9, 1183402 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . 9, 1183403 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . 9, 1183404 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . 9, 1183405 Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . 9, 1183408 Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . 9, 1183410 Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . 9, 1183653 Loctite® 9437™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2783668 Loctite® 9437™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2794142 Loctite® Big Foot™ Water Based Primer/Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4395551 Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4795555 Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47




145

IND

EX

Listing b

y Item and

Pro

duct N

umb

er

95581 Loctite® Big Foot™ Acrylic Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4395591 Loctite® Big Foot™ Acrylic Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4395724 Loctite® Fixmaster® 2000° Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8996092 Loctite® Nordbak® Chemical Resistant Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 3596102 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4796121 Loctite® Phenolic Roller Cores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4396131 Loctite® Mixer Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4396132 Loctite® Big Foot™ Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396153 Loctite® Bristle Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4396211 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396221 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396231 Loctite® Big Foot™ Zero V.O.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396251 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396255 Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396261 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396265 Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 4396303 Loctite® Nordbak® Combo Bead Wearing Compound . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3996321 Loctite® Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11796322 Loctite® Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 11796332 Loctite® Nordbak® Ultra High Temperature Pneu-Wear . . . . . . . . . . . . . . . . . . . . 36, 38, 3996363 Loctite® Nordbak® Fast Cure Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3996373 Loctite® Nordbak® Fast Cure Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3996392 Loctite® Nordbak® Ultra High Temperature Wearing Compound . . . . . . . . . . . . . . 36, 38, 3996433 Loctite® Nordbak® High Temperature Brushable Ceramic . . . . . . . . . . . . . . . . . . 37, 38, 3996443 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3996495 Loctite® Fixmaster® High Performance Quartz . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4796583 Loctite® Fixmaster® Wet Surface Repair Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8996604 Loctite® Fixmaster® Fast Set Steel Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8996675 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8596676 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8596677 Loctite® Fixmaster® Rapid Rubber Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8597001 Loctite® Hand Pump, 250 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 107, 11597002 Loctite® Hand Held Pneumatic Cartridge Dispenser, 300 ml . . . . . . . . . . . . . . . . . . . . 16, 5497006 Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12597007 Loctite® Integrated Semi-Automatic Controller Dispenser 0-100 psi . . . . . . . . . . . 5, 95, 10897010 Loctite® Integrated Semi-Automatic Controller Dispenser 0-15 psi . . . . . . . . . . . . 5, 95, 10897017 Loctite® Integrated Semi-Auto. Controller Dispenser

w/Low Level Sensor 0-100 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 95, 10897020 Loctite® Integrated Semi-Auto. Controller Dispenser

with Low Level Sensor 0-15 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 95, 10897412 Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8597413 Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8597422 Loctite® Fixmaster® Flex 80™ Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 84, 8597423 Loctite® Fixmaster® Flex 80™ Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 84, 8597434 Loctite® Fixmaster® 4 Minute Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8997443 Loctite® Fixmaster® Stainless Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997453 Loctite® Fixmaster® Aluminum Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997463 Loctite® Fixmaster® Aluminum Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997473 Loctite® Fixmaster® Superior Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997483 Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997484 Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8997572 Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 4797762 Loctite® Nordbak® Ceramic Tile Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3998011 Loctite® Hysol™ Reactive Urethane Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . 998116 Loctite® Shot Miser™ Dispense System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 10898128 Loctite® Cartridge Dispense Tip, 1/4" Male NPT (5 pack) . . . . . . . . . . . . . . . . . . . . . 22, 11598135 Loctite® Hysol™ Bulk-34 System -230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198145 Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198146 Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198147 Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198148 Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198149 Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8198344 Loctite® Ribbon Tip Adapter (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7698372 Loctite® Nordbak® High Temperature Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3998382 Loctite® Nordbak® Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3998383 Loctite® Nordbak® Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3998414 Loctite® Hand Pump, 50 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 95, 107, 11598415 Loctite® Caulking Gun Conversion Kit for 50 ml cartridges, 10:1 ratio . . . . . . . . . . . . . . . 2398430 Loctite® 200/400 ml Mix Nozzle, 9.3 mm, 40 elements, Stepped Tip (500 pack) . . . . . . . 7698431 Loctite® Industrial Manual Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6798432 Loctite® Industrial Pneumatic Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6798433 Loctite® Industrial Cordless Electric Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . 6798454 Loctite® 50 ml Mix Nozzle, Luer Tip, 6.0 mm, 21 elements (10 pack) . . . . . . . . . . . . . . . . 2398455 Loctite® 50 ml Mix Nozzle, Stepped Tip, 6.0 mm, 21 elements (10 pack) . . . . . . . . . . . . . 8898456 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 6.3 mm, 24 elements (10 pack) . . . . . . . . 7698457 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 8.0 mm, 24 elements (10 pack) . . . . . . . . 7698458 Loctite® Luer-Lok Adapter for 6.3 and 8 mm Stepped Tip Mix Nozzles (10 pack) . . . . . . . 7698459 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 10.0 mm, 24 elements (10 pack) . . . . 23, 7698460 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 8.0 mm, 24 elements (10 pack) . . . . . . . . 7698461 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 10.0 mm, 24 elements (10 pack) . . . . . . . 2398463 Loctite® 50 ml Mix Nozzle, 0.25", Stepped Tip Keyed, 28 elements (10 pack) . . . . . . . . . 2398466 Loctite® Caulking Gun Conversion Kit for 50 ml cartridges, 1:1 and 2:1 ratios . . . . . . . . . 23

98467 Loctite® 200/400 ml Mix Nozzle, Snap Tip, 8.0 mm, 24 elements (10 pack) . . . . . . . . . . 7698469 Loctite® 200/400 ml Mix Nozzle, Snap Tip, 9.3 mm, 24 elements (10 pack) . . . . . . . . . . . 7698470 Loctite® Snap Tip Mix Nozzle and Ribbon Tip Sample Kit . . . . . . . . . . . . . . . . . . . . . . . . . 7698471 Loctite® Flex™ Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8498472 Loctite® 50 ml Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 12598473 Loctite® 50 ml Square Mix Nozzle, Luer/Stepped Combo Tip,

5.3 mm2, 24 elements, (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 7698474 Loctite® 200/400 ml Square Mix Nozzle, Stepped Tip, 7.5 mm, 24 elements (10 pack) . . 23, 7698476 Loctite® 12 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7698477 Loctite® 25 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7698478 Loctite® 43 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7698544 Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 998545 Loctite® Hysol™ 050-H Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 998548 Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 598601 Loctite® 7703-HD0 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12098610 Loctite® 3/4" x 3/8" NPT Dispense Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11598613 Loctite® Precision O-Ring Cut and Splice Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11698693 Loctite® Fixmaster® Flex™ Conveyor Belt Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . 84, 8598732 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3998733 Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3998742 Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . . . . . . . 36, 38, 39, 87, 88, 8998743 Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . . . . . . . 36, 38, 39, 87, 88, 8998853 Loctite® Fixmaster® Metal Magic Steel™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8998992 Loctite® Nordbak® Castable Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 3999112 Loctite® Nordbak® High Temperature Wearing Compound . . . . . . . . . . . . . . . . . . 36, 38, 3999361 Loctite® Fixmaster® Floor Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4799365 Loctite® Fixmaster® Floor Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4799392 Loctite® Fixmaster® High Performance Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8999393 Loctite® Fixmaster® High Performance Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8999394 Loctite® Fixmaster® High Performance Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 8999545 Loctite® Fixmaster® Deep Pour Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 4799626 Loctite® Fixmaster® Etching Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8499812 Loctite® Nordbak® Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3999813 Loctite® Nordbak® Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 3999912 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8999913 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 8999914 Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89922089 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58922122 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58922128 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58922129 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58922544 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58922546 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58924104 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58924107 Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58960971 Loctite® 3034™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23960973 Loctite® 3034™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23982621 Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54982719 Loctite® Bond-A-Matic® 3000 Dispenser, 0-15 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95982722 Loctite® Bond-A-Matic® 3000 Dispenser, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95983436 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25983438 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25985246 Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25986000 Loctite® Pump-A-Bead™ II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51988715 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988716 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988717 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988718 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988719 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988720 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988721 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 55988722 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988723 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988724 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988725 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988726 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988843 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988844 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988845 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988846 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988847 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988848 Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55988903 Loctite® Meter Mix 1000H Dispense System, Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . 80988909 Loctite® Meter Mix 3000 Dispense System, Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80989516 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 0.188" ID, 32 elements (50 pack) . . . . . . . 76989518 Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 0.188" ID, 48 elements (10 pack) . . . . . . . 76998400 Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115




146

IND

EX

Listing by Product NamePRODUCT DESCRIPTION PAGE NUMBER PRODUCT DESCRIPTION PAGE NUMBER

Krytox® RFE Advanced PTFE Dry Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 68Krytox® RFE PFPE High Performance Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 68Krytox® RFE PFPE Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 68Loctite® 3/4" x 3/8" NPT Dispense Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Loctite® 1C-LV™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Loctite® 1C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® 1X™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® 3X™ Hysol® Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® 6C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Loctite® 11C™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Loctite® 12 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® 25 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® 43 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® 50 ml Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 125Loctite® 50 ml Mix Nozzle, 0.25", Stepped Tip Keyed, 28 elements (10 pack) . . . . . . . . . . . . . . . . . . . . 23Loctite® 50 ml Mix Nozzle, Luer Tip, 6.0 mm, 21 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Loctite® 50 ml Mix Nozzle, Stepped Tip, 6.0 mm, 21 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . 88Loctite® 50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 5.3 mm2, 24 elements, (10 pack) . . . 23, 76Loctite® 55™ Pipe Sealing Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 200/400 ml Mix Nozzle, 9.3 mm, 40 elements, Stepped Tip (500 pack) . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Snap Tip, 8 mm, 24 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Snap Tip, 9.3 mm, 24 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 0.188" ID, 32 elements (50 pack) . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 0.188" ID, 48 elements (10 pack) . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 10 mm, 24 elements (10 pack) . . . . . . . . . . . . . . . . . 23, 76Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 6.3 mm, 24 elements (10 pack) . . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Mix Nozzle, Stepped Tip, 8.0 mm, 24 elements (10 pack) . . . . . . . . . . . . . . . . . . . 76Loctite® 200/400 ml Square Mix Nozzle, Stepped Tip, 7.5 mm, 24 elements (10 pack) . . . . . . . . . . 23, 76Loctite® 220™ Threadlocker, Wicking Grade/Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109Loctite® 222™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Loctite® 222MS™ Threadlocker, Low Strength/Small Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 232™ Retaining Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® 236™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Loctite® 242® Threadlocker, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 243™ Threadlocker, Medium Strength/Oil Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 246™ Threadlocker, Medium Strength/High Temperature . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 262™ Threadlocker, Medium to High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 266™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 271™ Threadlocker, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 272™ Threadlocker, High Strength/High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 277™ Threadlocker, High Strength/Large Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 290™ Threadlocker, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109Loctite® 294™ Threadlocker, Wicking Grade/High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109Loctite® 312™ Speedbonder™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Loctite® 324™ Speedbonder™ Structural Adhesive, High Impact . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 325™ Speedbonder™ Structural Adhesive, High Temperature . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 326™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 330™ Depend® Adhesive, No Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 332™ Structural Adhesive, Severe Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 334™ Structural Adhesive, High Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 342™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Loctite® 349™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 352™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 363™ Impruv® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 366™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 380™ Black Max® Instant Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 382™ Tak Pak® Instant Adhesive, Ultra Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 392™ Structural Adhesive, Fast Fixture/Magnet Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 22Loctite® 401™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 403™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7Loctite® 406™ Prism® Instant Adhesive, Surface Insensitive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 408™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 409™ Super Bonder® Instant Adhesive, Industrial Grade Gel . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Loctite® 410™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 411™ Prism® Instant Adhesive, Clear Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 414™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 415™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 416™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 420™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 422™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 425™ Assure™ Instant Adhesive, Surface Curing Threadlocker . . . . . . . . . . . . . . . . . . . 108, 109Loctite® 426™ Prism® Instant Adhesive, Black/Toughened Gel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 430™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7Loctite® 431™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6, 122, 123Loctite® 435™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 123Loctite® 438™ Prism® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 444™ Tak Pak® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7Loctite® 454™ Prism® Instant Adhesive, Surface Insensitive Gel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 455™ Prism® Instant Adhesive Gel, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 6Loctite® 460™ Prism® Instant Adhesive, Low Odor/Low Bloom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 480™ Prism® Instant Adhesive, Black/Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 493™ Super Bonder® Instant Adhesive, Wicking Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 495™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7Loctite® 496™ Super Bonder® Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® 498™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant . . . . . . . . . . . . . . . . . . . 5, 7Loctite® 499™ Super Bonder® Instant Adhesive, Thermal Cycling Resistant Gel . . . . . . . . . . . . . . . . . . 7Loctite® 504™ Gasket Eliminator® Flange Sealant, Gap Filling . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® 509™ Gasket Eliminator® Flange Sealant, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® 510™ Gasket Eliminator® Flange Sealant, High Temperature . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® 515™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® 518™ Gasket Eliminator® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® 542™ Thread Sealant, Fine Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 545™ Thread Sealant, Hydraulic/Pneumatic Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 549™ Instant Seal Plastic Gasket Thread Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 554™ Thread Sealant, Refrigerant Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 560™ Thread Sealant, Large Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 564™ Thread Sealant, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 565™ PST® Thread Sealant, Controlled Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 567™ PST® Thread Sealant, High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 568™ Flange Sealant, Plastic Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 569™ Thread Sealant, Hydraulic Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 571™ Thread Sealant, Pipe Sealant HVV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 572™ Thread Sealant, Low Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 573™ Flange Sealant, Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 574™ Flange Sealant, Fast Curing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 577™ Thread Sealant, Coarse Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 579™ Thread Sealant, Instant Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 580™ PST® Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 587™ Blue, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® 592™ PST® Thread Sealant, Slow Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 114Loctite® 598™ Black, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® 603™ Retaining Compound, Press Fit/Oil Tolerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® 608™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® 609™ Retaining Compound, Press Fit/General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® 615™ Hysol® Epoxy Adhesive, Sandable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® 620™ Retaining Compound, Slip Fit/High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® 635™ Retaining Compound, Slip Fit/High Strength/Slow Cure . . . . . . . . . . . . . . . . . . . . . . 93, 94Loctite® 638™ Retaining Compound, Slip Fit/Maximum Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 93, 94Loctite® 640™ Retaining Compound, Press Fit/Medium Strength/High Temperature . . . . . . . . . . . . . . . 94Loctite® 641™ Retaining Compound, Press & Slip Fits/Controlled Strength . . . . . . . . . . . . . . . . . . . 93, 94Loctite® 648™ Retaining Compound, Press Fit/High Strength/Rapid Cure . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® 660™ Quick Metal® Retaining Compound, Press Fit Repair . . . . . . . . . . . . . . . . . . . . . . . . 93, 94Loctite® 675™ Retaining Compound, Press Fit/Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Loctite® 680™ Retaining Compound, Slip Fit/High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93, 94Loctite® 712™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Loctite® 713™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 740™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11


147

IND

EX

Listing b

y P

rod

uct Nam

e


PRODUCT DESCRIPTION PAGE NUMBER PRODUCT DESCRIPTION PAGE NUMBER

Loctite® 768™ X-NMS Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® 770™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 793™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Loctite® 907™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Loctite® 0151™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® 0232™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® 0420™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . 8, 10Loctite® 0430™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . . . . . . . . . . . . 10Loctite® 0437™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . 8, 10Loctite® 0450™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, EVA Based/Red . . . . . . . . . . . . . . 10Loctite® 0452™ Hysol® SprayPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10Loctite® 1942™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11, 80, 81Loctite® 2432™ Threadlocker, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 2440™ Threadlocker, Primerless/Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® 2760™ Threadlocker, Primerless/High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® 3030™ Adhesive, Polyolefin Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Loctite® 3032™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® 3034™ Structural Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® 3100™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3101™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3102™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3103™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3104™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3105™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3106™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3107™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3108™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3140™ Hysol® Epoxy Resin, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78Loctite® 3141™ Hysol® Epoxy Resin, High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78Loctite® 3145™ Hysol® Epoxy Resin, Flame Retardant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 79Loctite® 3160™ Hysol® Epoxy Hardener, Glossy Surface Finish . . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 79Loctite® 3162™ Hysol® Epoxy Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 79Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 79Loctite® 3164™ Hysol® Epoxy Hardener, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 79Loctite® 3165™ Hysol® Epoxy Hardener, Low Shrinkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 78, 79Loctite® 3173™ Hysol® Polyurethane Resin, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77Loctite® 3175™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3182™ Hysol® Polyurethane Hardener, Fast Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77Loctite® 3183™ Hysol® Polyurethane Hardener, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77Loctite® 3184™ Hysol® Polyurethane Hardener, Flame Retardant . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77Loctite® 3201™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3211™ Light Cure Adhesive, Polycarbonate/Thermoplastics . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3301™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3311™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3321™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3335™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 3336™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 3337™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 3340™ Light Cure Adhesive, UV Cationic Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 3341™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3345™ Light Cure Adhesive, Glass/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3355™ Light Cure Adhesive, Pre-Activated Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 3381™ Light Cure Adhesive, Flexible/Plastics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3407™ OptiLOC® Fiber Optic Adhesive, Silicone/Heat Cure . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Loctite® 3491™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3492™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3493™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3494™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3525™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3526™ Light Cure Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15Loctite® 3552™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15, 120, 121Loctite® 3553™ Indigo™ Visible Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 15, 120, 121Loctite® 3631™ Hysol® Hot Melt Adhesive, Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10Loctite® 3650™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Loctite® 3651™ Hysol® Hot Melt Adhesive, Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10, 81Loctite® 3751™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3761™ LiteTak® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Loctite® 3911™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3912™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3913™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Loctite® 3921™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3922™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3924™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3926™ Light Cure Adhesive, Plastic/Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3933™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3936™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3941™ Light Cure Adhesive, High Performance/Various Substrates . . . . . . . . . . . . . . . . 120, 121Loctite® 3942™ Light Cure Adhesive, High Performance/Various Substrates . . . . . . . . . . . . . . . . 120, 121Loctite® 3943™ Light Cure Adhesive, High Performance/Various Substrates . . . . . . . . . . . . . . . . 120, 121Loctite® 3944™ Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Loctite® 3971™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3972™ Light Cure Adhesive, Plasticized Substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121Loctite® 3981™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . . . . . . 25, 28, 124, 125Loctite® 3982™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . . . . . . 25, 28, 124, 125Loctite® 3984™ Hysol® Epoxy Adhesive, High Performance/Various Substrates . . . . . . . 25, 28, 124, 125Loctite® 3985™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® 4011™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123Loctite® 4013™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4014™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4031™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4046™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® 4061™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4081™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4161™ Super Bonder® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4203™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 4204™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6Loctite® 4205™ Prism® Instant Adhesive, Thermal Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Loctite® 4206™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4306™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 123Loctite® 4307™ Flashcure® Light Cure Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 12, 14, 122, 123Loctite® 4541™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4601™ Prism® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 4851™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 123Loctite® 4861™ Prism® Instant Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6, 122, 123Loctite® 4981™ Super Bonder® Medical Device Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 5031™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 80, 81Loctite® 5033™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14Loctite® 5039™ Nuva-Sil® Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 56, 58Loctite® 5040™ RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 81Loctite® 5045™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5083™ Nuva-Sil® Silicone Potting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Loctite® 5091™ Nuva-Sil® Silicone Potting Compound, High Adhesion . . . . . . . . . . . . . . . . . . . . . . 14, 81Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 5182™ Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® 5240™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® 5248™ Nuva-Sil® Medical Device Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® 5600™ Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5699™ Grey, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5772™ Thread Sealant, Low Halogen/Low Sulfur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® 5900® Flange Sealant, Heavy Body RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5905™ Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5910® Flange Sealant, RTV Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5920™ Copper, High Performance RTV Silicone Gasket Maker . . . . . . . . . . . . . . . . . . . 56, 58, 59Loctite® 5950™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5951™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5960™ Fastgasket® Flange Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5963™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58Loctite® 5964™ Procure™ Cure-In-Place Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 58Loctite® 5999™ Flange Sealant, Heavy Body/Grey High Performance RTV Silicone . . . . . . . . . . . . . 56, 58Loctite® 6002™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® 7075™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 7090™ Primer, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Loctite® 7109™ Tak Pak II® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Loctite® 7113™ Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 7380™ Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 7380™ Depend® Activator, Solventless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 7387™ Depend® Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 740LV™ Hysol® Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Loctite® 7451™ Prism® Medical Device Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Loctite® 7452™ Tak Pak® Accelerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99

148

IND

EX

List

ing

by

Pro

duc

t N

ame


Loctite® 7460™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . 9, 10Loctite® 7471™ Primer T™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 7500™ Hysol® SprayPac™ Polyshot™ Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . 9, 10Loctite® 7649™ Primer N™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99, 108, 109Loctite® 7701™ Prism® Medical Device Adhesive Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123Loctite® 7703-HD LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Loctite® 7804FRM-HV™ Hysol® Hot Melt Adhesive, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Loctite® 7804™ Hysol® Hot Melt Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Loctite® 7809FR™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10, 81Loctite® 7811™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10, 81Loctite® 7901™ Hysol® Hot Melt Adhesive, Polyamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10, 80, 81Loctite® 7951™ Prism® Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99Loctite® 9340™ Hysol® Epoxy Adhesive High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® 9412™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Loctite® 9430™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® 9432NA™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® 9433™ Hysol® Epoxy Adhesive, Self-Leveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® 9437™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Loctite® 9459™ Hysol® Epoxy Adhesive, High Temperature Resistance . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® 9460™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® 9460F™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Loctite® 9460PB™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Loctite® 9462™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Loctite® 9739™ Hysol® Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Loctite® C-200® High Temperature Solid Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® E-00CL™ Hysol® Epoxy Adhesive, Low Odor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-00NS™ Hysol® Epoxy Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-05CL™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-20HP™ Hysol® Epoxy Adhesive, Fast Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® E-20NS™ Hysol® Epoxy Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® E-30CL™ Hysol® Epoxy Adhesive, Glass Bonder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-40FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-60HP™ Hysol® Epoxy Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® E-60NC™ Hysol® Epoxy Adhesive, Electrically Non-Corrosive . . . . . . . . . . . . . . . . . . . 24, 26, 77Loctite® E-90FL™ Hysol® Epoxy Adhesive, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® E-120HP™ Hysol® Epoxy Adhesive, Ultra Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® E-214HP™ Hysol® Epoxy Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27Loctite® H.V.A.C. Blue Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® M-11FL™ Hysol® Medical Device Urethane Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® M-121HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® M-21HP™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® M-31CL™ Hysol® Medical Device Epoxy Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125Loctite® N-1000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® N-7000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® O-Ring Making Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® U-05FL™ Hysol® Urethane Adhesive, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 28Loctite® U-09FL™ Hysol® Urethane Adhesive, Highly Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® U-09LV™ Hysol® Urethane Adhesive, Low Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26Loctite® C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65Loctite® D609™ Hysol® Epoxy Adhesive, Ultra Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26Loctite® H3000™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H3101™ Speedbonder™ Structural Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H3151™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H3300™ Speedbonder™ Structural Adhesive, General Purpose/Fast Fixture . . . . . . . . . . . 21, 23Loctite® H4000™ Speedbonder™ Structural Adhesive, Non-Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H4100™ Speedbonder™ Structural Adhesive, Ultra Fast . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H4200™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H4500™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H4720™ Speedbonder™ Structural Adhesive, Metal Bonder . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H4800™ Speedbonder™ Structural Adhesive, Toughened . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H6051™ Speedbonder™ Structural Adhesive, Plastic/Composite Bonder . . . . . . . . . . . . . . 21, 23Loctite® H8000™ Speedbonder™ Structural Adhesive, Fast Fixture . . . . . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H8500™ Speedbonder™ Structural Adhesive, High Toughness . . . . . . . . . . . . . . . . . . . . . 21, 23Loctite® H8600™ Speedbonder™ Structural Adhesive, Galvanized Bonder . . . . . . . . . . . . . . . . . . . 21, 23Loctite® MS930™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 55Loctite® MS939™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 55Loctite® MS9360™ Elastic Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17, 54, 55Loctite® Multi-Purpose Glass Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® All-Purpose Spray Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19

Loctite® Anaerobic Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Loctite® Aqua Power® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 103Loctite® Aviation Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® Belt Dressing & Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Loctite® Big Foot™ Acrylic Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Acrylic Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Heavy Duty Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Low Profile Pedestrian Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Vehicular Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Water Based Primer/Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Big Foot™ Zero V.O.C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Loctite® Black Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19Loctite® Bond-A-Matic® 3000 Dispenser, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Loctite® Bond-A-Matic® 3000 Dispenser, 0-15 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Loctite® Bristle Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Loctite® Cartridge Dispense Tip, 1/4" Male NPT (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 115Loctite® Caulking Gun Conversion Kit for 50 ml cartridges, 1:1 and 2:1 ratios . . . . . . . . . . . . . . . . . . . . 23Loctite® Caulking Gun Conversion Kit for 50 ml cartridges, 10:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Loctite® Chisel® Gasket Remover (Methylene Chloride) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Chisel® MC-Free Gasket Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Clover® Duplex Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73Loctite® Clover® Silicon Carbide Grease Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73Loctite® Clover® Silicon Carbide Pat Gel® Water Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73Loctite® Cold Galvanizing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Color Guard®, Tough Rubber Coating/Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Color Guard®, Tough Rubber Coating/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Color Guard®, Tough Rubber Coating/Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Color Guard®, Tough Rubber Coating/Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19Loctite® Copper Gasket Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Loctite® Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Loctite® Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Loctite® Electrical Contact & Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Electrical Contact Cleaner, Non-Flammable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Extend® Rust Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Extreme Pressure Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Fixmaster® 2000° Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® 4 Minute Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® Aluminum Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Aluminum Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Concrete Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47, 86, 88, 89Loctite® Fixmaster® Crack Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 47Loctite® Fixmaster® Deep Pour Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® Etching Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® Fast Set Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® Fast Set Steel Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® Fast Set Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Flex 80™ Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85Loctite® Fixmaster® Flex 80™ Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 84, 85Loctite® Fixmaster® Flexible Joint Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 47Loctite® Fixmaster® Flex™ Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Loctite® Fixmaster® Flex™ Conveyor Belt Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85Loctite® Fixmaster® Floor Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® General Purpose Epoxy, Mixer Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® High Performance Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® High Performance Quartz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® Instant Belt Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85Loctite® Fixmaster® Magna-Crete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® Magna-Crete Summer Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46Loctite® Fixmaster® Magna-Crete Winter Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46Loctite® Fixmaster® Marine Chocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46, 47Loctite® Fixmaster® Metal Magic Steel™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Poxy Pak™, Fast Cure Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Loctite® Fixmaster® Rapid Rubber Repair Static Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85


IND

EX

149

Listing b

y P

rod

uct Nam

e



Loctite® Fixmaster® Stainless Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Steel Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Steel Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Super Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 46, 47Loctite® Fixmaster® Superior Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Underwater Repair Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 88, 89Loctite® Fixmaster® Wear Resistant Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39, 87, 88, 89Loctite® Fixmaster® Wet Surface Repair Putty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88, 89Loctite® Flex™ Metal Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Loctite® Food Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Food Grade Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Form-A-Thread® Stripped Thread Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Gasket Sealant 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® Gasket Sealant 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® Gear, Chain and Cable Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 69Loctite® Graphite-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Hand Held Pneumatic Cartridge Dispenser, 300 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 54Loctite® Hand Pump, 250 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 107, 115Loctite® Hand Pump, 50 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 95, 107, 115Loctite® Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Heavy-Duty Rubberized Undercoating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Hi-Tack Gasket Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® High Performance N-5000™ High Purity Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® High Temperature Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® High Viscosity Paste Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 55Loctite® Hydraulic Jack Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Hysol® CoolMelt™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® Hysol® QuikPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® Hysol® SuperPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® Hysol® WaxPac™ Hot Melt Adhesive, EVA Based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 11Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Loctite® Hysol™ 050-H Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Loctite® Hysol™ Bulk-34 System – 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Loctite® Hysol™ Reactive Urethane Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Loctite® Industrial Cordless Electric Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Loctite® Industrial Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 101, 102, 103Loctite® Industrial Manual Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Loctite® Industrial Pneumatic Grease Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Loctite® Industrial Strength Paint Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Instant Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Integrated Semi-Automatic Controller Dispenser with Low Level Sensor 0-100 psi . . . . 5, 95, 108Loctite® Integrated Semi-Automatic Controller Dispenser with Low Level Sensor 0-15 psi . . . . . 5, 95, 108Loctite® Luer-Lok Adapter for 6.3 and 8 mm Stepped Tip Mix Nozzles (10 pack) . . . . . . . . . . . . . . . . . . 76Loctite® Magna-Crete Activator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Loctite® Maintain® Lubricant Penetrant, Moisture Displacer & Rust Preventer . . . . . . . . . . . . . . . . . 67, 69Loctite® Maintenance Tackle Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Manufacturing Reliability Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Marine Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Maxi-Coat™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Maximum Strength Headliner Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19Loctite® Meter Mix 1000H Dispense System, Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Loctite® Meter Mix 3000 Dispense System, Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Loctite® Mixer Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Loctite® Moly Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Moly Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Moly-50™ Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® Natural Blue® Biodegradable Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 103Loctite® Natural Blue® Biodegradable Cleaner & Degreaser, Fragrance-Free . . . . . . . . . . . . 100, 102, 103Loctite® Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65Loctite® No More Leaks™, Plastic Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® Non-Chlorinated Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Non-Flammable Contact Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Nordbak® Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39Loctite® Nordbak® Castable Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39Loctite® Nordbak® Ceramic Tile Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39Loctite® Nordbak® Chemical Resistant Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Nordbak® Combo Bead Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Fast Cure Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Fast Cure Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39

Loctite® Nordbak® High Impact Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39Loctite® Nordbak® High Temperature Brushable Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39Loctite® Nordbak® High Temperature Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® High Temperature Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Ultra High Temperature Pneu-Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Ultra High Temperature Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® Nordbak® Wearing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38, 39Loctite® ODC-Free Cleaner & Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 103Loctite® Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Phenolic Roller Cores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Loctite® Pipe Joint Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Precision O-Ring Cut and Splice Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Loctite® Primer for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Pro Strength Degreaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 103Loctite® Pro Strength Parts Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Pro Strength Varnish Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 103Loctite® Pump-A-Bead™ II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Loctite® Quick Service Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® QuickStix™ 248™ Threadlocker – Medium Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 106, 109Loctite® QuickStix™ 268™ Threadlocker – High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107, 109Loctite® QuickStix™ 534™ Hi-Tack Gasket Dressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52, 53Loctite® QuickStix™ 548™ Gasket Eliminator® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 52, 53Loctite® QuickStix™ 561™ PST® Pipe Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® QuickStix™ 668™ Retaining Compound, High Temperature . . . . . . . . . . . . . . . . . . . . . . . . 92, 94Loctite® QuickStix™ C5-A® Copper Based Anti-Seize Lubricant . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65Loctite® QuickStix™ Heavy Duty Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® QuickStix™ Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65Loctite® QuickTite® Instant Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Loctite® Reliability Tacklebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Ribbon Tip Adapter (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® Shot Miser™ Dispense System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 108Loctite® Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 69Loctite® Silver Grade Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64, 65Loctite® Snap Tip Mix Nozzle and Ribbon Tip Sample Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Loctite® Solvo-Rust® Super Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Loctite® Superflex® Black RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® Blue RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® Clear RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® Non-Corrosive RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® Red High Temp RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® RTV, Black Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® RTV, Clear Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® RTV, White Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Superflex® White RTV, Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® Thinner for Color Guard® Tough Rubber Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35Loctite® Thread Sealant with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® Thread Sealing Tape with PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114Loctite® Tight®, Multipurpose Anaerobic Gel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109, 113, 114Loctite® Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Under Pressure Pipe Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116, 117Loctite® Urethane Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 59Loctite® ViperLube® Clear High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . . . . . . . 66, 68, 69Loctite® ViperLube® High Performance Synthetic Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 68, 69Loctite® White Hi-Temp Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65Loctite® White Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69Loctite® Zinc Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64, 65

Loctite ® products for design, assembly,manufacturing, and maintenance

the

volume 7

the adhesive sourcebook 2007volum

e 7

U.S.A.For your local Loctite® Adhesives and SealantsSpecialist, the nearest authorized Loctite® productsdistributor, to place an order, to arrange an in-plantseminar or for technical product assistance, call:1.800.LOCTITE (562.8483)

Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, Connecticut 06067Tel: 860.571.5100Fax: 860.571.5465www.henkelna.com/industrialwww.loctite.com

CanadaFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order, to arrange an in-plant seminar, or for technical productassistance, call:1.800.263.5043 (within Canada)

Henkel Canada Corporation2225 Meadowpine Blvd.Mississauga, Ontario, Canada L5N 7P2Tel: 1.800.263.5043 (within Canada)Tel: 905.814.6511Fax: 905.814.6522

MexicoFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order,to arrange an in-plant seminar or for technical product assistance,call: 01 800 901 8100 (within Mexico)

Henkel Capital S.A. de C.V. Boulevard Magnocentro No. 8 Piso 2Centro Urbano Interlomas52760 Huixquilucan, Estado de MexicoTechnical Product Assistance: 01 800 901 8100 (within Mexico)To place an order:Tel: +52 (55) 5836 3644Fax: +52 (55) 5787 9404www.loctite.com.mx

Central AmericaFor your local Loctite® Adhesives and SealantsSpecialist, for your nearest authorized Loctite®

products distributor, to place an order,to arrange an in-plant seminar, or for technical product assistance,call: 506.277.4868 (within Costa Rica)

Henkel Costa Rica Ltda.San Joaquin de FloresHeredía, Costa RicaTel: 506.277.4868 (within Costa Rica)Tel: 506.277.4800Fax: 506.277.4883www.loctite.com.mx

Henkel CorporationEngineering Adhesives1001 Trout Brook CrossingRocky Hill, CT 06067U.S.A.www.henkelna.com/industrialwww.loctite.com

Henkel –Your partner worldwide

Except as otherwise noted, all trademarks in this catalog are trademarks of Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office.Krytox is a registered trademark of E.I. DuPont de Nemours Co., Inc. UL is a registered trademark of Underwriter’s Laboratories, Inc. NSF is a registered trademark of NSF International. CSA is a registered trademark of CSA International. © Henkel Corporation, 2007. All rights reserved. 3848 / LT-3355 (1/2007)

South AmericaFor your local Loctite ® Adhesives and Sealants Specialist, for your nearest authorizedLoctite® products distributor, to place an order,to arrange an in-plant seminar, or for technical product assistance, contact:

Henkel Ltda.Rua Karl Huller, 136 – Jd. Canhema 09941-410Diadema/SP, BrazilTel: 0800 704 2334 (within Brazil)Tel: 55.11.4075.8955Fax: 55.11.4075.8887www.loctite.com.br

Henkel Argentina S.A.Tte. Cnel. Magán 1990 – Sarandi(B1872HRN) AvellandaBuenos Aires, ArgentinaTel: 0800 33 30213

(within Argentina)Tel: 54 11 4001 0100Fax: 54 11 4205 3442www.loctite.com.ar

Henkel Chile Ltda.Av. Apoquindo 3355, Oficina 8 – 1º PisoLas Condes, Santiago, ChileTel: 800 212002 (within Chile)Tel: 56 2 2333606Fax: 56 2 2341448www.loctite.cl

Henkel Colombiana S.A.Calle 17 No. 68-B-73Bogotá D.C., ColombiaTel: 01 800 01 14173 (within Colombia)Tel: 571 423 9000Fax: 571 425 1331www.loctite.com.co

Henkel Venezolana S.A. Zona Industrial Pruinca Calle 2 Parcela 31 y 32Guacara – Edo Carabobo, VenezuelaTel: 0800 436 5300 (within Venezuela)Tel: 5824 5560 2611Fax: 5824 5560 2660www.loctite.com.ve

Distributor Information

Material Safety Data Sheets

Technical Data Sheets

Product Application Assistance

Product Literature

Visit the web for immediate access to:

Material Safety Data Sheets and TechnicalData Sheets also available by 24-hour fax.1.800.LOCTITE (562.8483)1.800.263.5043 (within Canada)

For information on ManufacturingReliability Training call:1.800.LOCTITE (562.8483)1.800.263.5043 (within Canada)

adhesivesourcebook2007

loctite lt3355 adhesive source book 2007

Documents