locks & hardware for metal gates 2015/16for keyless entry through gates. this marine grade...

www.signetlocks.co.uk LOCKS & HARDWARE FOR METAL GATES 2015/16

[email protected] 552066

‘Lock’ head

ing‘Lo

ck’ heading

1



3

Contents

Locks1. Bolt-on Locks 04

2. Weld-in Locks 06

3. Digital Locks 08

4. ScrewfixedLocks 11

5. Handles 13

6. Mortise Locks 14

7. Sliding gate Locks 15

8. Fire Brigade Locks 15

9. Eurocylinders 16

10. Padlocks 16

Gate Closers

11. Buffers 17

12. Gate Closers 18

13. Closing Hinges 20

Hinges

14. Hinges 21

Panic Hardware

15. Panic Hardware 27

Electric Gate Hardware

16. Electric Gate Hardware 28

Gate Hardware

17. Gate Hardware 31

Sliding Gate Hardware18. Cantilever Gate Kits 35

19. Gate Wheels & Track 35

20. Overhead Track System 37

www.signetlocks.co.uk

[email protected]

01243 552066


[email protected]

01243 552066

‘Lock’ head

ing

‘Lock’ head

ingLOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066

4

Locks



Locks

5

1. Bolt-on Locks Bolt-on Locks .1

GATEMASTER Select Pro bolt-on gatelocksA quality range of gatelocks designed and built in the UK. Available in two sizes, code 01 to fit 10mm to 30mm gate frames and code 02 to fit 40mm to 60mm gate frames

• Can be used on left or right hand gates

• Adjustable deadbolt (up to 27mm adjustment) for precise fitting on site

• 1 piece machined stainless steel locking bolt

• Only requires 3 holes to be drilled in the gate frame

• Brushed finish stainless steel bolt support plate with brass bearing. Reduces friction, wear and increases product life

One lockA robust, easy to fit lock for use on metal or wooden gates. The lock couples easy access with deadlocking for security. Pull bolt across to hold gate closed and use key to deadlock for security, more convenient than using a padlock

5 lever locking mechanism supplied with keep plate, fixing bolts and security nuts

Lock size 154 x 130 x 36mm

77mm throw deadbolt OL1000

New Product

Bolt on latch deadlockStainless steel latchbolt springs 13mm into the gate post and is retracted using the handles. Turning the key shoots the bolt 30mm and deadlocks it for added security. The latchbolt is adjustable in length for precise fitting on site. This lock is supplied with a bolt guide plate and gate post strike plate

10 – 30mm SBLD1601

40 – 60mm SBLD1602

New Product

Bolt on deadlockA very convenient, easy to use long throw deadlock for every application. Gone is the hassle of removing a padlock, gone is the hassle of fabricating a slide bolt. Simply turning the key, throws the stainless steel deadbolt 30mm

10 – 30mm SBD1601

40 – 60mm SBD1602

New Product

Digital gatelockDigital gatelocks have been developed to meet the demand for keyless entry through gates. This marine grade Digital Gatelock has many unique features

See page 8 for details

LocinoxlockThis popular lock is available in 2 designs – Industrial design and Ornamental design

• Supplied with handles • Supplied with 4 pin double sided eurocylinder• Available in sizes to fit 10mm flat bar to 60mm box section• 25mm deadbolt movement • Adjustable latchbolt and deadbolt – 18mm of adjustment

Locinox lock – industrial design, 10mm – 30mm LOC 1030



Locinox lock – ornamental design, 10mm – 30mm LOCO 1030



Slotted backplateFor use when securing double gates OL1001

Angle bracketfor use when fixing lock to gates made from flat bar OL1002

Collar toolLocinox Collar Tool

LOCT

LocinoxkeepUsed with the Locinox lock, also acts as a gate stop LOC K

LocinoxgatelockLocinox Gatelock 2 collar fixing 10mm LOC 2C 10

Locinox Gatelock 2 collar fixing 30 – 50mm LOC 2C 3050

QuickexitlockThis quick exit gate lock is designed to allow rapid exit through gates. Designed specifically for metal gates, the unit is simple to install yet robust. The unit will automatically latch shut when the gate is closed. There are two options available on this lock, with either a digital keypad access or keyed access on the outside. These locks come in left hand and right hand. Right hand lock shown

Digital keypad on one side

10mm – 30mm Left hand SQED1601LH

10mm – 30mm Right hand SQED1601RH

40mm – 60mm Left hand SQED1602LH

40mm – 60mm Right hand SQED1602RH

Key access on one side

10mm – 30mm Left hand SQEL1601LH

10mm – 30mm Right hand SQEL1601RH

40mm – 60mm Left hand SQEL1602LH

40mm – 60mm Right hand SQEL1602RH

New Product

Bolt on keylatchThe Select Pro keylatch is perfect for securing the gate every time it is closed. When the gate is closed the lock latches shut and can only be opened with a key. This has proven very popular for use on communal, school and alley gates.

10 – 30mm SBKLLT1601

40 – 60mm SBKLLT1602

New Product

Bolt on latchA very simple bolt on latch, compatible with the Select Pro range. Holds the gate shut and is released using the handles. With no locking facility this latch is perfect for just holding a gate shut, and is commonly used on housing developments and playgrounds

10 – 30mm SBL1601

40 – 60mm SBL1602

New Product

• Designed for heavy use gates

• Deadbolt has 30mm bolt throw for added security

• Square case, easily incorporated into gate design • 1000 hours salt spray tested

• 5 pin eurocylinder for added security

• 3 handle types available, AH, OK

and TDH. See page 13 for details

LOCKS & HARDWARE FOR METAL GATES 2015/16 www.signetlocks.co.uk [email protected] 01243 552066

6

Locks



Locks

7

2. Weld-in Locks Weld-in Locks .2

GATEMASTER Select Pro weld-in gatelocks

A quality range of gatelocks designed and built in the UK

• Stainless steel deadbolt which moves 30mm with one turn of the key• Bolt is adjustable in length for precise fitting on site• Lock case is made from 2.5mm steel• Available in 4 widths to suit different box section sizes New Product

Weld-in deadlockA very convenient, easy to use, long throw deadlock for every application. Simply turning the key, throws the stainless steel deadbolt 30mm

Lockcase width

30mm SWD1630

40mm SWD1640

50mm SWD1650

60mm SWD1660

Weld-in latch deadlockStainless steel latchbolt springs 13mm into the gate post and is retracted using the handles. Turning the key shoots the bolt 30mm and deadlocks it for added security

Lockcase width

30mm SWLD1630

40mm SWLD1640

50mm SWLD1650

60mm SWLD1660

Weld-in latchHolds the gate shut and is released using the handles. With no locking facility this latch is perfect for just holding a gate shut

Lockcase width

30mm SWL1630

40mm SWL1640

50mm SWL1650

60mm SWL1660

GATEMASTER high security deadlock Kit Lock size 140 x 115 x 31mm

This deadlock kit is ideal for use on double gates or for extra security on single gates. The lockplate, keepset and deadlock are fitted to one gate and the keep plate welded to the other. In use, the keep plate is captured in the slot by the deadlock and prevents the gates being forced apart

5GK

GATEMASTER10Kextraheavy duty gate lockThis heavy gate lock is designed to provide maximum protection and security. The base plate is welded on to the gate and the lock is assembled onto it after galvanising using an ingenious fixing system which is inaccessible when the gate is locked. Ideal for securing single and double gates

Lock size – 250 x 160 x 55mm

10K

Bullet lock & housingThe removable locking pin secures itself within the weldable housing

BLAlso available Keyed Alike

Weldable Strike Plate For use with GLD locks

GLD P

MildsteelboxWeldable mild steel box for stainless steel gatelock—60 x 40 x 219mm

HYBB

GATEMASTER double throw latch deadlockA traditional latch deadlock, for use when handles are required. Perfect for use in traditional wrought iron gate designs, the case is welded into the gate frame. After the gate has been galvanised and painted the lock mechanism is easily installed into the case

• Suitable for left or right hand gates• Deadbolt throws 24mm with two turns of the key• 4 different case widths available• Also available keyed alike or in Fire Brigade version to accept FB1 & FB2 key.• 5 pin eurocylinder included• Accepts standard handle designs Available in 4 widths

GATEMASTER double throw latch deadlock, 30mm GLD 30




Order handles separately, see page 13

Stainless steel lockcaseGATEMASTER double throw latch deadlock with stainless steel case, 30mm case width GLDS 30

GATEMASTER double throw latch deadlock with stainless steel case, 40mm case width GLDS 40

Order handles separately, see page 13

Weld in lock with vertical boltsWeld in lock with 2 vertical bolts for increased security, 40mm width lockcase

GLD 40 2XVB

Vertical bolts are assembled using standard M10 studding – order separately

Stainless steel gatelock All stainless steel construction with a deadlocking hook bolt which throws 33mm

HYB

Stainless steel handleStainless steel Handle set to suit stainless steel gatelock

HYBH

GATEMASTER double throw deadlockThis Gatemaster deadlock is simply welded into the gate, and has proved to be extremely reliable. Available in 5 different widths to suit your application, the deadlock will blend into any gate design

• 24mm double throw movement• 5 pin eurocylinder included• Cost effective method of introducing a reliable locking system • Also available keyed alike or in Fire Brigade version to accept FB1 & FB2 keys• Case designed to be galvanised/painted Available in 5 widths

GATEMASTER double throw deadlock, 25mm GD 25





Weld-in deadlocking latchThis latch provides convenient security on communal or high usage gates. The latchbolt automatically deadlocks when the gate is shut, preventing the latch being pushed back

Left hand version shown

Available in 4 widths

Deadlocking latch – 30mm LH GDL30L

Deadlocking latch – 30mm RH GDL30R







Weld-in keylatchThe Select Pro keylatch is perfect for securing the gate every time you shut it behind you. When the gate is closed the lock latches shut and can only be opened with a key

Lockcase width

30mm SWKLLT1630

40mm SWKLLT1640

50mm SWKLLT1650

60mm SWKLLT1660


8

Locks



Locks

9

3. Digital Locks Digital Locks .3

GATEMASTER Digital GatelockDigital gatelocks have been developed to meet the demandfor keyless entry through gates. This marine grade Digital Gatelock has many unique features.

Deadlocking – punch in the code, turn the handle and the stainless steel latch bolt moves forward 30mm anddeadlocks, especially useful on double gates.

Auto-latching – close the gate and the latchbolt latches into the gate frame. To open the gate, enter the code and turn the handle.

No power needed – High quality digital keypads ensure long lasting durability. Perfect for single and double gates.

• Marine grade keypads ensure long lasting durability• Latchbolt moves 13mm and can be deadlocked another 30mm• Brushed finish stainless steel bolt support plate with brass bearing. Reduces friction, wear and increases product life.

Marine grade bolt on digital gatelockThis digital gatelock is straightforward to use, and designed to function fitted to a metal gate in a marine environment. The auto-latching design means that you can be assured your gate will latch shut behind you.

• To suit 40 – 60mm gate frames• 14 digit keypads• Marine grade – salt water tested• 1 year guarantee• 20mm latching movement

All locks also available with lever handles – easier to operate.

Gatemaster single keypad lockLeft hand lock shown

To suit 10 - 30mm, Left hand DGLS01L

To suit 10 - 30mm, Right hand DGLS01R

To suit 40 - 60mm, Left hand DGLS02L

To suit 40 - 60mm, Right hand DGLS02R

Marine grade single keypad lock and handleLeft hand lock shown

Left hand MGS-L

Right hand MGS-R

Gatemaster double keypadlock

To suit 10 - 30mm DGL01

To suit 40 - 60mm DGL02

Marine grade doublekeypad lockRight hand lock shown

Left hand MGD-L

Right hand MGD-R

Keypad on both sides

Marine grade keypad lockwith key overrideLeft hand lock shown

Double keypad

Left hand MGDK-L

Right hand MGDK-R

Single keypad and handle

Left hand MGSK-L

Right hand MGSK-R


10

Locks



Locks

11

3. Digital Locks Screwfixedlocks.4

GATEMASTER weldable steel lock cases for digital locksConvenient and cost effective, these lock cases are fully prepared for receiving 14 button keypads – simply weld the lock case into the gate and fit the digital lock after painting/galvanising. 2 types of lock case are available, digital lock case and digital lock case with security keep, each type available in a choice of 3 widths

Order digital keypads separately

Digital lock case, 30mm width DLC 30



GATEMASTER Digital lock case with security keepDesigned for extra security on single gates andfor use on double gates. The keep plate is captured between the lockcase and the security keep and prevents the gates being forced apart.

Order digital keypads separately

Digital lock case with security keep30mm width DLCK 30



Standard duty double throw deadlock and strike plateA compact lock which can be screw fixed into a steel fabrication. 95mm x 82mm x 17mmAvailable in electro galvanised finish or in stainless steel

Standard duty double throw deadlock, Electro galvanised SDL

Standard duty double throw deadlock, Stainless steel SDLS

Gatemaster locking boltA robust locking bolt for surface fitting to metal or wooden gates. This lock is unique as it has a strong steel deadbolt that throws 53mm with one turn of the key

• Key both sides• 53mm throw• Electro-galvanised finish • Suitable for left or right hand gates• A rang of fixing plates available – see list below

GATEMASTER locking bolt80mm x 80mm x 17mm GLB

Heavy duty double throw deadlockThis lock has an exceptionally large deadbolt measuring 48mm x 10mm which throws 25mm. 105mm x 105mm x 23mm

Right hand lock shown

Heavy duty double throw deadlock, Left hand DTL

Heavy duty double throw deadlock, Right hand DTR

GATEMASTER locking bolt withextendedeurocylinderThis version has a eurocylinder which projects 56mm from the back of the lock. Used for fixing to timber gates or through metal box section gate frames

GLB02

Heavy duty digital keypadDesigned for high volume use. This digital keypad has an integral handle for ease of operation. Supplied with tubular dead locking latch

Heavy duty single keypad and rear handle HDSK

Heavy duty double keypad HDDK

Marine grade version of above keypads.Ideal for exposed locations

Heavy duty single keypad and rear handle Marine grade HDSK MG

Heavy duty double keypad Marine grade HDDK MG

Latch lock – Latch version of above deadlockSlam the gate to secure shut and use the key to open. Keyed both sides

Right hand lock shown

Bolt on latch LH GLBL LH

Bolt on latch RH GLBL RH

14 button double keypadAccess through the gate from either side using code. Supplied with tubular dead locking latch

Available in two finishes

14 button double keypad, Satin Chrome DK

14 button double keypad, Black DKB

Mechanical Digital LockThis popular lock is opened by keying a 5 digit code on the 14 button keypad. Code can be reset by owner. Supplied with tubular deadlocking latch

Available in two finishes

14 button Single keypad and rear handle – with hold back facility, Satin Chrome SK

14 button Single keypad and rear handle, Black SKB

Single Keypad with rim deadlock

SKR

Marine grade mechanical digital lockThese 14 button keypads are produced using materials suitable for use in exposed and marine locations. Supplied with tubular deadlocking latch

Available in two versions

Marine grade single keypad – with rear handle SKM

Marine grade double keypad DKM

GATEMASTER Rear handle shroudRestricts access to the handle from outside

Right hand version shown

Rear handle shroud, left hand SKHSL

Rear handle shroud, right hand SKHSR

Electrogalvanised plates to suit the GATEMASTER locking bolt

Slotted screw fixed lock plate

GLB ST

Screw fixed keep plate

GLB KT

Screw fixed escutcheon

GLB ET

Weld-in lock plates to suit the GATEMASTER locking boltStandard lock plate – used for single gates, supplied with lock fixing screws

GLB P

Used for securing double gates. A keep plate is welded to the second gate so that it passes through the slot in the lockplate and is secured with the deadbolt. This ensures the gates can not be ‘sprung’ open

Also used for extra security on single gates

GLB S

4mm thick steel keep plate

GLB K


12

Locks



Locks

Locks

13

4.Screwfixedlocks Handles .5

Heavy duty deadlockA very useful deadlock, brass deadbolt moves 20mm with one turn of the key. 17 x 75 x 85mm. Electrogalvanised

HDD

Camlock for triangular keyCamlock for triangular key

CLT

Magnet action catchIdeal for securing gates, the permanent magnet draws the latch across as the gate closes ensuring the gate is secured every time

MAC

Budget lockscrew fix or weld, electrogalvanised

BL

Budget lock keyBudget lock key

BLK

Magnet action safety lockThis magnet action latch is opened by pulling the knob on the top. This is out of reach of small children. Its special design means that no latching force is required, ensuring that the gate latches shut reliably every time. The knob can be locked using the key

MSL

Rod LocksThis lock uses a Tee key to operate 2 rods which extend up and down into the frame of the gate or door

2 way Rod Lock RL

Tee key for above Rod lock TKRL

Triangular keyTriangular key for camlock

CLT KEY

Camlock A useful lock for fitting to small fabricated doors. Also availalable keyed alike

CL

Push pin lock Also available keyed alike

PPL

Mini camlock 8mm long thread & 30mm cam. Also available keyed alike

CMINI

Pull handle230mm long. Black paint finish

Other sizes availablePH2

Weldable handle boss setEnables the metalworker to produce unique handles to suit the design of the gate

SB

Single sided 8mm square barFor use when fitting a handle to one side of a lock only

SS8Stainless steel pull handle300mm x 19mm Back to Back

PH 300 BB SS

Tubular steel handleTubular steel handle, 180mm

TSH 180

Traditional handle set Lock handle

TDH

Alloy handle setLock handle

AH

Child safety handleLock handle

CPH

Stainless steel handle set Stainless steel handle set

SSH

Octagon knob setLock handle

OK

Twisted handle set Lock handle

TH


14

Locks



Locks

Locks

15

6. Mortise locks Sliding gate locks .7

Fire brigade locks .8

GATEMASTER Hook lock and digital lock kitThis kit comprises a hook lock, a pair of digital keypads and a weldable steel case. Used on sliding gates which need to be latched shut for security. Also keyed both sides for deadlocking the hook

Available in 3 widths

Hook lock and digital lock kit, 30mm width HLDK 30



Single sided version—keypad one side, handle the other side

Hook lock and single digital lock kit, 30mm width HLSK 30



Narrow hook lock Heavy hookbolt projects 24mm when locked, can be used on hinged gates where the hook can be used to locate into the gate post to prevent the gate being forced open

Also used for sliding gates NHL

Narrow auto deadlocking latchThe latch deadlocks automatically on shutting the gate. This prevents access by pushing back the latch. Used with a gate closer, this deadlocking latch is ideal for communal gates which need to be automatically locked whenever the gate is closed

NAL

Narrow latch deadlock Narrow latch deadlock NLD

Order handles seperatly

Narrow deadlock Heavy deadbolt projects 34mm when locked

ND

Quality 5 lever sashlock with brass forend

Conforms to BS3621 – deadboltmoves 20mm 5SL

Also available Keyed Alike 5SL KA

GATEMASTER steel case for 5 lever sashlock 30mm – 165 x 85 x 31mm 5SLC

High security insurance deadlock

5 lever, conforms to BS3621, deadbolt moves 20 mm 5CD

Also available Keyed Alike 5CD KA

GATEMASTER steel case for high security deadlock – 140 x 85 x 31mm 5CDC

Double throw deadlockDeadbolt projects 35mm unlocked and 60mm double locked. Galvanised case and unplated steel deadbolt. Supplied with double sided eurocylinder

CD

Double throw latch deadlockSimilar to the above deadlock this gate latch deadlock has a spring loaded unplated latch bolt which moves forward and deadlocks when the key is turned. Supplied with a double sided eurocylinder

CLD

Order handles separately

Quality 5 lever deadlock with brass forend

Conforms to BS3621 deadbolt moves 20mm 5DL

Also available Keyed Alike 5DL KA

GATEMASTER steel case for 5 lever deadlock – 130 x 85 x 31mm 5DLC

Hook lock for sliding gatesThis substantial hook lock is excellent value. The locating pin prevents the gate being released by lifting

Supplied with eurocylinder and keep plate

HL

HooklockboxWeldable box in zinc finish steel. Available in 2 sizes for fitting to 40mm and 50mm box section. The hook lock is fitted in a slot in the 40mm or 50mm box gate frame and the lock box is welded onto the back of the gate frame

Hook lock box for 40mm gate frames HLB40

Hook lock box for 50mm gate frames HLB50

Narrow LocksNarrow locks for fitting into box section gate frames – minimum size box 40 x 40mm

Slam locks

FB4 Slam lock LH open in SL FB4 LH OI

FB4 Slam lock RH open in SL FB4 RH OI

FB4 Slam lock LH open out SL FB4 LH OO

FB4 Slam lock RH open out SL FB4 RH OO

Rim deadlock

FB1 Rim deadlock LH RD FB1 LH

FB1 Rim deadlock RH RD FB1 RH

FB2 Rim deadlock LH RD FB2 LH

FB2 Rim deadlock RH RD FB2 RH

Mortise deadlock

FB1 Mortise deadlock MD FB1

FB2 Mortise deadlock MD FB2

Galvanised padlockFB11 padlock, galvanised PAD FB11

Yellow padlockFB14 padlock, yellow

PAD FB14

Fire brigade key

FB1 Key KEY FB1

FB2 Key KEY FB2

FB4 Key KEY FB4

FB11 Key KEY FB11

FB14 Key KEY FB14

Fire brigade LocksA range of locks which can be operated by special keys carried bythe Fire Brigade


16

Locks

Locks



Locks

Gate clo

sers

17

9. Eurocylinders

Quality brass padlock• Solid brass body• Hardened, nickel and chrome plated steel shackle• Double locking

50mm B50

60mm B60

EurocylindersAll cylinders available as keyed alike – just add KA to the end of the code

Also available

• Other cylinder lengths• Offset eurocylinders• Restricted section eurocylinders – keys can only be cut by specified dealers

Rectangular steel armoured padlock

• Solid brass body armoured with a chrome plated and hardened steel case• Armoured padlocks are tested to the European EN Standards (BS EN 12320 - CEN GRADE) and meet grade 4 (80mm) and grade 3 (60 mm)

60mm S60

80mm S80

10. Padlocks

Padlocks .10

Traditional steel padlock Traditional steel padlock keyed to PES12

PES12

Rectangular solid steel padlock 84mm High security solid steel padlock, 84mm wide

S84

Disc padlock70mm diameter, stainless steel

D70

Marine grade padlock

• Stainless steel shackle and inside workings• Comes with a lifetime guarantee

50mm MG50

60mm MG60

Buffers .11

Eurocylinder double sided

Double sided 60mm, 30mm + 30mm EC 60



Eurocylinder with thumbturn

60mm, 30mm + 30mm TEC 60

70mm, 35mm + 35mm TEC 70

90mm, 45mm + 45mm TEC 90

Eurocylinder single sided30mm + 10mm overall length

SC 40

Bump stop 18 diameter18 diameter x 7mm buffer, M6 x 16 thread

BS 18

Bump stop 50 diameter50 diameter x 30mm buffer, M10 x 25 thread

BS 50

Bump stop 64 diameter64 diameter x 25mm buffer

BS 64

Adjustable gate damperThis top quality stainless steel unit will arrest a gate as it closes and ensure slow, quiet closing. Ideal for use with maglocks

AGD

Gatemaster Gate Silencer KitSimple but effective – gate stop fitted with rubber bump stops

GSK

Bump stop 25 diameter25 diameter x 12mm buffer

BS 25


18

Gate clo

sers



Gate clo

sers

19

12. Gate closers Gate closers .12

GATEMASTER gate closerweld-onStainless steel gate closer with weld-on brackets

GSS

Gas release toolGas release tool for GSS

GSTS

Gas release toolGas release tool for GSB

GSTB

GATEMASTER gate closerscrewfixedStainless steel gate closer with screw fixed brackets

GSSW

Adjustable speed gate closerThis gate closer has a unique adjusting system which enables the closing speed to be controlled simply by turning the cover tube

GSA

Surface mounted gate closerThis popular gate closer has two variable closing speeds for closing and latching. Can also be used to hold open a gate at 90 degrees

For gates up to 50kg

SMC

GATEMASTER gate closerThe robust and reliable GSB gas strut is a top seller due to its suitability for a wide range of applications from commercial gates to ornate wrought iron gates

The gas strut is mounted on the inside of the gate and with its dampened action will not ‘slam’ the gate closed. Exceptionally easy to install due to the innovative design of the adjustable brackets included

• Weld on or screw fixed adjustable brackets available• Unique oil dampened design to control closing speed• Black or stainless steel finish designed for exterior use• No need to reduce gas simply move the strut along the slots in the brackets to adjust closing force• Suitable for gates up to 80kg

Weld on gate closing strut GSB

Screw fix gate closing strut GSBW

Surface mounted gate closer with slide railThe same closer as above but with an additional slide rail to enable easy fitting in most situations

SMR

Stainless steel gate closing spring

Gate closing spring – 250mm. Stainless steel

SSS

Spring gate closerCloses gates up to 80 kg, adjustable force, includes roller bracket to guide spring arm

SGC

Black gate closing springGate closing spring – 250mm. Black finish

SBL

Zinc gate closing spring

Gate closing spring – 250mm. Zinc finish

SZ

Door closer

80kg capacity DC3

120kg capacity DC4-6

140kg capacity DC6-7

Industrial Gas SpringsAvailable in a range of sizes, these Gas Springs have a wide range of uses including supporting the weight of steel hatches and for holding doors and hatches open safely. Any size can be manufactured to order. Not suitable for closing gates

Finished with a hard chromed rod and black powder coated body. Supplied at maximum force with a release valve for reducing the force as required. Supplied with ball joint end fittings

Sizes given are the distance between the centre of the fittings at maximum extension x lengthof stroke

Gas spring 300 x 100mm GS300




GATEMASTER hydraulic gate closer and hinge kitThe hydraulically dampened APS closer, closes gates up to 120kg. Mounted underneath the gate, the closer unit is unobtrusive and hidden inside its own steel case

This unit is highly vandal resistant

The closing speed is easily adjusted using the special key provided and due to the two separate speed adjustment valves the latching speed can be set separately to the closing speed. A fully adjustable top hinge is included

• Very robust unit which has been tried and tested• Meets ROSPA recommendations for gate closing speed• Vandal resistant• Speed adjustable• For welding into a gate• No power required and maintenance free• Will allow a gate to be opened both ways if required and close to the centre• Hold back option available, please ask

APS


20

Gate clo

sers



Hing

es

21

13. Closing hinges Hinges .14

Built-in hingeAdjustable hinge for building into masonry

Built-in hinge M18 BH18

Built-in hinge M22 BH22

Single C hinge withthrust bearingA very strong hinge with horizontal adjustment and a thrust bearing to support the gate weight

SCH

180˚hingeAn adjustable hinge with a slotted plate which gives 2-way adjustment and can be used to allow gates to open 180° 180˚ hinge M18 1818

180˚ hinge M22 1822

Long thread hingeA long thread, fully adjustable hinge to suit all metal gates. These hinges are more aesthetically pleasing than using standard hooks and eyes and are a cost effective solution

Long thread hinge M16 x 135 x 100mm LT16



Weld-in nut hingeRemovable hinge pin is retained with a strong circlip, Electrogalvanised

thread dia x overall length x thread length

Weld-in nut hinge M18 x 75 x 38mm WN18



Hinge plate with captive nutFor bolting hinges to gate posts, electrogalvanised

Hinge plate with captive nut, M18, Plate size – 90 x 90 x 4mm P18

Hinge plate with captive nut, M22, Plate size – 110 x 110 x 5mm P22

Double C hingeA very strong hinge with horizontal adjustment

CCH

Rising hinge

100mm, steel, RH – drilled RH RH

100mm, steel, LH – drilled RH LH

Spring hinges – reinforced polymerThese top quality bolt on spring hinges are made from reinforced polymer and have an adjustable stainless steel spring within the hinge. Used in pairs, the 92mm hinge can close gates up to 25kg and the 125mm hinge, 50kg

Spring hinge. 92mm long SC 810

Spring hinge. 125mm long SC 830

Rising hinges setHeavy duty – A well proven product. This hinge set can close gates and doors up to 250 kg in weight. Used as a pair, one hinge lifts the gate as it opens

Maximum vertical movement – 25mm at 180 degrees opening. 38mm dia

Designed to be welded in place Rising hinge set, heavy duty – Right hand RHS RH

Rising hinge set, heavy duty – Left hand RHS LH

Spring hinges – steelA range of steel hinges that can be used to close gates. Available as single action and double action – where the gate will open both ways and return to the centre. Made from steel with a paint finish. Also available in stainless steel

Used in pairs these hinges can close gates up to the weights shown

Sold singly

Additional hinges can be used to increase gate weight capacity

Spring hinge single action steel 100mm – 15 kg gate SHS 100



Spring hinge single action stainless steel 100mm – 22 kg gate SHS SS 100



Captive nut hingeTo adjust, slacken off the 2 lock nuts and lock them together, rotate them to adjust the gate and then reclamp them against the heavy washerThread dia x overall length x thread length

Captive nut hinge M18 x 75 x 38mm CN18

Weld-in nut hinge M22 x 85 x 46mm CN22

Extraheavydutyhingewith sealed bearingsM30 thread and adjustable nut with weld in captive washer. Overall width 170mm x height 87mm. This hinge can support gates up to 750 kg (depending on the design of the gate)

EHDH

Adjustable hinge with bearingsIntegral roller and thrust bearing. M20 x 160mm thread, galvanised

AHB

Heavy duty hinge with plain bearingsA precision hinge with plain brass thrust and radial bearings and grease point. M30 x 200mm thread, galvanised

5KH

Spring hinge double action

Steel 125mm – 25 kg gate SHD 125

Steel 175mm – 45 kg gate SHD 175

Stainless steel 100mm – 22 kg gate SHD SS 100

Stainless steel 150mm – 40 kg gate SHD SS 150

Gate closing hinge kitSimple and robust weldable gate hinge with integral adjustable spring

Available in two choice of brackets

Square gate frame CHKS

Round gate frame CHKR


22

Hing

es



Hing

es

23

14. Hinges Hinges .14

Connection pinFor welding into gate frames. For use with round clamp hinges. Dia x overall height x square size

Connection pin 30 dia x 60 x 30mm CP30



Top pivot with ball bearing Provides a low friction top pivot and has horizontal adjustment. The stub pivot is welded to the top of the gate and the plate and bearing assembly is welded to the post

Top pivot with ball bearing 50mm dia R50

Top pivot with ball bearing 65mm dia R65

Bottom pivot with taper roller bearing

50 dia x 40mm high – 500 kg capacity TRB50

65 dia x 46mm high – 1000kg capacity TRB65

Bottom pivot with ball bearing

50 dia x 40mm high – 300 kg capacity BB50

65 dia x 46mm high – 600kg capacity BB65

Base pivot pin

20 dia x 35 high P20

24 dia x 35 high P24

Offset pivot pin

20 dia OP20

24 dia OP24

Pivot pin base plate

20.5 dia hole B20

24.5 dia hole B24

Weldable base pivotWeldable base pivot with 20mm dia steel ball

WBP

Pivot set with barConsists of a bottom pivot with a steel ball and a top pivot with an adjustable pin

To adjust – remove protective cap, loosen lock nut and rotate pin

Pivot set with bar for 40mm box PSB40

Pivot set with bar for 50mm box PSB50

Pivot set Consists of a bottom pivot with a 25mm diameter steel ball and a top pivot with a pin

For fitting into box section

Pivot set for 40mm box PS40

Pivot set for 50mm box PS50

Round clamp hinge with adjustable nutTo adjust, slacken off the 2 lock nuts and lock them together, rotate them to adjust the gate and then re clamp them against the heavy washerThread dia x overall length x thread length x hole dia

Round clamp hinge with adjustable nut M18 x 103 x 46 x 30mm dia RC18



Round clamp hinge with weld-in nutOne piece nut and washer. To adjust, support gate, remove bolt from hinge, adjust as required and reassemble. Thread dia x overall length x thread length x hole dia

Round clamp hinge with weld-in nut M18 x 103 x 46 x 30mm dia RN18

Round clamp hinge with weld-in nut M22 x 116 x 52 x 35mm dia RN22

Round clamp hinge with weld-in nut M27 x 136 x 65 x 40mm dia RC27

Weld on gate eyes, self colourTo fit pin dia x distance from centre of hole to back edge

Weld on gate eyes, 12 x 27mm E12






Thrust BearingsUse to reduce friction on universal weld on hinges and gate hooks and eyes Thrust bearing 12mm PTB 12

Thrust bearing 16mm PTB 16

Thrust bearing 20mm PTB 20

Weld on gate hooks, self colourPin dia x distance from centre of hole to back edge

Weld on gate hooks, 12 x 27mm H12






Hinge pin security collarsThese electro galvanized steel security collars clamp to the hinge pin and prevent gates being lifted off

Available in five sizes

Hinge pin security collars for 12mm pin SC 12





Adjustable gate eyes with 2 nuts

To fit pin dia x length x thread dia

Adjustable gate eyes with 2 nuts, 12 x 100 x M12 AE 12 100






Adjustable gate eyes with 2 nuts, 22 x 150 x M20 Galv AE 22 150





GATEMASTER safety restraint systemThis simple safety device is used to restrain the top of a gate in the event of the top hinge failing

Used on gates up to 150kg it is an essential addition to increase safety in today’s increasingly safety conscious world. Can be welded or boltedin place

Safety restraint system SRS

Permanentfast-fixsecurity collarsStainless steel

These push-on security collars will prevent gates being lifted off. Adds a pleasing aesthetic touch to gate hinges

Available in 4 sizes Security collar for 12mm pin SCP 12

Security collar for 16mm pin SCP 16




24

Hing

es



Hing

es

25

14. Hinges Hinges .14

2 part pressed hinge stainless steel2 part lift off hinge with removable pin and brass washer. Length x overall width x pin dia x material thickness

2 part pressed hinge stainless steel, 100 x 25.5 x 10 x 2mm 2PHS 100

2 part pressed hinge stainless steel, 140 x 29 x 11 x 2.5mm 2PHS 140

3 part pressed hinge mild steel3 part lift off hinge with removable pin and steel washer. Length x overall width x pin dia x material thickness

3 part pressed hinge mild steel, 100 x 46 x 10 x 2mm 3PH 100

3 part pressed hinge mild steel, 140 x 26 x 11 x 2.5mm 3PH 140



3 part pressed hinge stainless steel3 part lift off hinge with removable pin and brass washer. Length x overall width x pin dia x material thickness

3 part pressed hinge stainless steel, 100 x 46 x 10 x 2mm 3PHS 100

3 part pressed hinge stainless, steel, 140 x 26 x 11 x 2.5mm 3PHS 140

4 part pressed hinge mild steelLarge 4 part hinge with 19.8 dia steel pin and brass washers

4 part pressed hinge mild steel, 210 high x 19.8 dia pin 4 PH

Universal weld on hinge, steel, brass pin, self colourLength x body dia x pin dia

Universal weld on hinge, steel, brass pin 60 x 10 x 6mm UNI 60B







Universal weld on hinge with grease point, self colourLength x body dia x pin dia

Universal weld on hinge with grease point, 100 x 14 x 8mm UNI 100SG





Universal weld on hinge, steel, steel pin, self colourLength x body dia x pin dia

Universal weld on hinge, steel, steel pin 60 x 10 x 6mm UNI 60S







Universal weld on hinge stainless steelLength x body dia x pin dia

Universal weld on hinge, steel, steel 60 x 10 x 6mm UNI 60SS





New Product

2 part pressed hinge mild steel 2 part lift off hinge with removable steel pin and steel washers

Length x overall width x pin dia x material thickness

2 part pressed hinge mild steel, 60 x 18 x 5.8 x 2mm 2PH 60


2 part pressed hinge mild steel, 100 x 25.5 x 8.8 x 2mm 2PH 100

2 part pressed hinge mild steel, 140 x 30 x 11 x 2.5mm 2PH 140



Heavy duty weldable hingeWeldable hinge 190 x 38mm dia with 25mm dia pin and grease point

RHS D

Flag hinges2 part pressed flag hinge with fixed pin. Available in left hand and right hand versions. Left hand hinge shown

Length x overall width x pin dia x material thickness

2 part pressed flag hinge, 70 x 54 x 8 x 2.6mm LH FH60L

2 part pressed flag hinge, 70 x 54 x 8 x 2.6mm RH FH60R

2 part pressed flag hinge, 114 x 80 x 10 x 3mm LH FH100L

2 part pressed flag hinge, 114 x 80 x 10 x 3mm RH FH100R





3partpressedflaghingewith removable pinLength x overall width x pin dia x material thickness

3 part pressed flag hinge, 130 x 105 x 9.8 x 2.5mm 3FH110

3 part pressed flag hinge, 160 x 94 x 11.8 x 3mm 3FH140

3 part pressed flag hinge, 190 x 110 x 11.8 x 3.5mm 3FH170

3 part pressed flag hinge, 220 x 116 x 12.8 x 4mm 3FH200

2partpressedflaghingewith removable pin2 part pressed flag hinge, Length x overall width x pin dia x material thickness150 x 150 x 11.8 x 3.5mm LH/RH

FH150

HeavydutyflaghingeCan be used as LH or RH. Produced from solid steel this flag hinge has a 14mm pin and thrust bearing. Maximum capacity per hinge 125kg Overall height 140mm, overall width 92mm, pin dia 14mm

HDFH


26

Hing

es



Panic hard

ware

27

14. Hinges Panic hardware .15

Panicexitbar

Panic exit push bar – For use where the general public use the gate, 1200mm Long PBE

Panic exit push bar for double doors PBED

Extra length push bar 1650mm PB1650

Extra length push bar 2150mm PB2150

GATEMASTER Panic pad, digital lock and weldable lockcase kitPanic exit from the inside and access from outside via the keypad. Weld the lock case into the gate and fit the panic pad and digital lock after painting or galvanising

Available in 3 lock case widths.

Panic pad, digital lock and lockcase kit 30mm width PPDL 30



Panicexitbarwithvertical boltsPanic exit bar with vertical bolts

PBEV

Panicexitpadwithvertical boltsPanic exit pad with vertical bolts

PPEV

Panic padbolt

Panic padbolt – Break tube to operate RPB

Spare tube RPS

Outside access deviceFitted in conjunction with a panic bar or pad, this device allows access from outside via the lockable knob

OADE

PanicexitpadFor use where trained personnel use the gate

Panic exit pad PPE

GATEMASTER Panic pad security shieldHelps prevent panic pad being operated from outside

Left hand version shown

Panic pad security shield, left hand PPSSL

Panic pad security shield, right hand PPSSR

HeavydutyboltonflaghingeOne leaf is welded and the other is bolted in place. Used where the fabrication needs to be disassembled

Overall height 140mm, overall width 130.5mm, pin dia 14mm

HDFHB

Heavy duty 2 part hingeMade from solid steel, this hinge has a 12mm dia pin and a thrust bearing. Slotted fixing holes allow horizontal and vertical adjustment. Hinges can be fitted after fabrication is painted/galvanised.

Supplied with fixing bolt covers

Overall height 99.5mm, overall width 84mm, pin dia 12mm

HDH 2P

Heavy duty 3 part hingeAs the above hinge but 3 part to increase the load bearing capacity.

Overall height 153mm, overall width 84mm, pin dia 12mm

HDH 3P

Undrilled hingeMild steel hinge without holes. Self colour

Height x overall width x leaf thickness

Undrilled hinge, 76 x 63 x 2mm UD 76

Undrilled hinge, 102 x 73 x 2.6mm UD 100

Heavy duty undrilled hingeStrong double pressed hinge, self colour, used for security doors


Heavy duty undrilled hinge, 76 x 60 x 4.2mm UDH 76

Heavy duty undrilled hinge, 102 x 72 x 4.2mm UDH 102

Heavy duty undrilled hinge, 150 x 98x 6.0mm UDH 150

Heavy duty drilled hingeElectro galvanised


Heavy duty drilled hinge, 76 x 60 x 4.2mm DH 76



Heavy duty drilled hingeStainless steel with bearings


Heavy duty drilled hinge, 75 x 50 x 3mm 304 stainless steel DHS4 75




Continuous hinge undrilledOpen width x length x material

Continuous hinge undrilled, steel, 38 x 1829 x 1.2mm CH 38

Continuous hinge undrilled, steel, 51x 1829 x 2.0mm CH 51

Continuous hinge undrilled, stainless steel, 51 x 1829 x 2.0mm CHS 51

Continuous hinge undrilled, stainlesssteel, 51 x 1829 x 1.2mm CHS 51L

Continuous hinge undrilled, steel, 80 x 2000 x 3.0mm CH 80

Continuous hinge undrilled, Stainless steel, 80 x 2000 3.0mm CHS 80


28

Electric g

ate hardw

are



Electric g

ate hardw

are

29

16. Electric gate hardware Electric gate hardware .16

Electric gate lockEasy to fit and reliable, this electric lock has a galvanised case and solid brass deadlocking latch. Keyed both sides this lock can also be remotely released using a 12V AC supply.

Electric gate lock right hand open in EKK 1

Electric gate lock left hand open in EKK 2

Electric gate lock right hand open out EKK 3

Electric gate lock left hand open out EKK 4

Electric gate lockKeyed both sides with electric release and mechanical release button

Electric gate lock with release button, right hand open in EKKP 1

Electric gate lock with release button, left hand open in EKKP 2

Electric gate lock with release button, right hand open out EKKP 3

Electric gate lock with release button, left hand open out EKKP 4

High security electric gate lockA high security electric gate lock that can be used for both left and right hand gates. Also ideal for use on double gates

Keyed both sides with electric release CE

Keyed both sides with electric release and mechanical release button CEP

Transformer for CE/CEP TCE

Electromagnet – mortise

Electromagnet Electrogalvanised, 250kg capacity, 38 x 186 x 28mm

EMM250

Gate Maglock SystemThis kit includes a stainless steel 545kg holding force external use maglock and attachment plates with integral pull handles. The simplest way to fit an electromagnet to a gate

EMGK

Electric release, mortise, heavy duty, monitoredHeavy duty electric release with an integral switchthat can be used to confirm that the gate is closed

ER HDM

Electromagnet Stainless Steel270kg capacity, surface fixed44 x 230 x 40mm

EMS270

Electromagnet Stainless Steel545kg capacity, surface fixed63 x 222 x 39mm

EMS545

Electric releasesA range of electric releases that are used to release gates remotely. Can be used with manyof the gate latches in this catalogue – please ask

Available as fail safe and fail secure

Fail safe – when the power is off the electric release unlocks

Fail secure – when the power is off the electric release remains locked

Electric release, mortise, fail safe ER FSF

Electric release, mortise, fail secure ER FSC

Heavy duty keypad, with integral electronicsStrong stainless steel housing and robust keys make this keypad an ideal choice for car parks and industrial areas

HDKS

Audio and Video entry systemsA high quality range of entry phone kits which are simple to fit and have excellent speech quality

We can create bespoke systems, contact us with your requirements

StainlesssteelproximityreaderSurface mounted reader with sealed electronics. High resistance to vandalism. 97 x 76 x 20mm.Tri-coloured LEDs indicate recognition of the card or fob

SSPR

Stainlesssteelproximityreader – Narrow styleAs above SSPR. Measuring 140 x 35 x 22mm this reader can be fitted to a gate post

SSPR NS

ControllerforproximityreadersUsed with the above proximity readers, this controller has integral electronics to control up to two doors and recognise up to 500 proximity cards or fobs

CPR

ProximityfobFits onto a key ring

PF

Brackets for EMS270

Brackets for EMS270 EMS270Z

Brackets for EMS545 EMS545Z


t

30

Electric g

ate hardw

are



Gate hard

ware

31

16. Electric gate hardware Gate hardware .17

PushbuttonexitswitchStainless steel, surface mounted

PBS

Domed push button exitswitchStainless steel, surface mounted

DPBS

Pushbuttonexitswitchnarrow styleStainless steel, surface mounted

PBSN

Door loopFor protecting cables from the gate post to the gate. 600mm

DL

Armoured door loopWith vandal resistant ends. 600mm

ADL

Relay and timer module0 – 20 second delay timer with relay for operating locking devices

RTM

Key switchesSurface mounted, stainless steel key switches with a high resistance to vandalism

Available in 3 versions

Maintained switch from which the key can be removed in both the on or off position KSM

Momentary switch. Insert the keyand rotate it against a spring to switch a device on or off KSMO

3 position switch. KS3

7 day timer

Timer, 7 day 12V, Robust and easy to program T12

Timer, 7 day 24V T24

Timer, 7 day 240V T240

Dropboltgalvanisedfinish450mm overall length 16mm dia

GDB

Dropbolt socketGalvanised, to concrete in

DBS

Heavy padbolt, 210mm overall length10 x 25 steel bar, electrogalvanised

HPB

Padlockable dropbolt galvanisedfinish450mm overall length, 16mm dia

PDB

Padlockable dropbolt stainless steelPadlockable dropbolt stainless steel 450mm

PDBSS

Stainless steel spring dropboltFor double gates. Closing the second gate shoots the bolt into position

SDB

Concealed vertical dropboltA very neat drop bolt for double gates which is enclosed within the box section frame of the gate – minimum box section 30 x 30mm. When the second gate is closed, the dropbolt cannot be lifted

CDD

As above product, to suit single gates CDS

GATEMASTER Autolocking dropboltFor double gates, weld fixed

In use, the dropbolt is lowered and rotated so that the lifting plate folds across the edge of the first gate. The dropbolt is now locked in position. Closing the second gate prevents the dropbolt being unlocked. The second gate can now be locked to the first gate with a standard gate lock. The gates cannot be ‘spread apart’ because the dropbolt is locked in position

ADB

As above Dropbolt but fixed with bolts to the edge of wooden or metal gates. ADBS

New Product

Light padbolt

130mm overall length – 6 x 16 steel bar, electrogalvanised P130



Metal cased power supplies with battery charging circuit and space for batteryOrder battery separately

Metal cased power supply, 12V dc 1.0 amp, 215 x 215 x 80mm MCPS12 1

Metal cased power supply, 12V dc 2.0 amp, 215 x 215 x 80mm MCPS12 2

Power supply, 12V dc. 1.5 amp

142 x 92 x 60mm. DIN Rail mounting PS12 15

with built-in timer adjustable from 0.5to 3.5 seconds. 142 x 92 x 60mm. DIN Rail mounting PS12T 15


32

Gate hard

ware



Gate hard

ware

33

17. Gate hardware Gate hardware .17

Galvanised padbolt220mm overall length -16 dia bolt

GPB

Gate hookGalvanised, 150mm

GH150

Gate holdbackFor concreting in

GHC

Locking bar for padlocksHeavy galvanised locking bar – Horizontal

HB

Locking bar for padlocksHeavy galvanised locking bar – Vertical

VB

Stainless steel padboltStainlesss steel padbolt

SPB

Padlockable slide bolt – blackPadlockable slide bolt – black

PSB

Springbolt

9.5mm dia SB 9

12mm dia SB 12

16mm dia SB 16

Heavy hasp & staple

Heavy hasp & staple HS

Heavy hasp & staple stainless steel HSSS

High quality security chain,

1200mm long MDC12

2000mm long MDC20

Carbine hook316 Stainless steel 5 x 50mm

CHK 5

Round escutcheon45mm diameter

ROE

Security escutcheon to weldThis security escutcheon protects the eurocylinder from attack. 30 x 46mm

4mm WSE04

8mm WSE08

12mm WSE12

Staple on plate

316 Stainless steel 5mm SPSS5

316 Stainless steel 8mm SPSS8

Link

316 Stainless steel 4mm LSS4

316 Stainless steel 6mm LSS6

ChainsandfittingsA range of popular sizes of steel chain and fittings. Sizes indicate link material diameter x length

Sold in metres

Chain BZP 1 x 10mm x 1M CG1

Chain Black 2.5 x 30mm x 1M CB1

Chain Heavy duty Galv 2.5 x 24mm x 1M CG2






Chain 316 Stainless steel 3.0 x 22mm x 1M CSS1

Chain 316 Stainless steel 5.0 x 32mm x 1M P130

Stainless steel escutcheonStainless steel escutcheon

SSE

Black plastic escutcheon32 x 67mm

BPE

Brush stripMultiple applications. Fix to doors to prevent draughts

For more information visit our website at:www.signetlocks.co.uk

or phone us

Post capsA range of post caps are available

For more information visit our website at:www.signetlocks.co.uk

or phone us


34

Gate hard

ware



Slid

ing g

ate hardw

areG

ate hardw

are

35

17. Gate hardware Cantilever track .18

Gate wheels and track .19

Cantilever Sliding Gate SystemThese cantilever gate kits are designed for applications where a sliding gate is required but the ground is uneven or the gateway is being used by heavy machinery that could damage standard track.

• Quieter than floor track systems• No need to excavate the roadway and the roadway can be used during installation• The solution for installing sliding gates on sloping ground• No track wear even in high usage applications• Track is delivered in 6m lengths and extra lengths are available• Free delivery to most of the UK on all cantilever gate kits• CGK250 and CGK550 track size - 66 high x 58 wide x 3mm thick x 6m long• CGK800 – 60 high x 60 wide x 3.5mm thick x 6m long

Cantilever gate kit, 3m opening, 250kg weight limit CGK 250



Gate latch strike8mm thick

GLS

Railing lug double hole73mm overall length – 25 x 5 material, 11mm holes

RL73

Railing lug adjustable60mm overall length, 25 x 8 material, 13mm slot

RLA

GrillfixingspacerThese decorative spacers are adjustable in length and are used when fixing grills into reveals in brickwork. Length – 32mm to 40mm, Dia – 35mm, hole dia – 14mm

GFS

Dropbolt eyeWeldable eye with 19.5mm dia hole

DBE

Dropbolt holderTo retain dropbolt when lifted

DBH

Dropbolt carrierDropbolt carrier

DBC

Gate latch160mm x 30mm x 6mm

GL

Gate latch strap

75mm overall length – 25 x 5mm material GLS75

90mm overall length – 25 x 5mm material GLS90

Railing lug single hole

33mm overall length – 25 x 5 material, 11mm hole RL33

52mm overall length – 25 x 5 material, 11mm hole RL52

Gate stop

Cast. Heavy cast stop for bolting to floor SC HD

Pressed. Pressed stop for screw fixing, electrogalvanised SP

Concreting. Electrogalvanised for concreting SC

Railing lug slotted

12mm slot – 52mm overall length, 25 x 8 material RLS 2512

16mm slot – 52mm overall length, 30 x 8 material RLS 3016

40 x 9 material – 60mm overall length, 12mm slot RLS 4012

50 x 9 material – 62mm overall length, 12mm slot RLS 5012

Drop catch to boltIdeal for securing doors and hatches

DCB

Drop catch to weldIdeal for securing doors and hatches

DCW

Gate top guide roller

M14 thread – 30mm dia x 35mm long nylon roller TR14

M16 thread – 40mm dia x 62mm long nylon roller TR16

Gate top guide roller assemblyAdjusts to guide gates made from 40mm to 60mm wide box

TG

Gate wheel with enclosed springGalvanised finish, 100mm dia wheel – for supporting the leading edge of a hinged gate

GWE


36

Gate hard

ware



Gate hard

ware

37

19. Gate wheels and track Overhead track system .20

Tracksurfacefixed

For 16mm dia groove wheels, 3m length TS 16

For 20mm dia groove wheels, 3m length TS 20

Track concreted in

For 16mm dia groove wheels, 3m length TC 16

For 20mm dia groove wheels, 3m length TC 20

Track joining pin

For TS/TC16 TJP 16

For TS/TC20 TJP 20

Gate stop wall mountedGate stop wall mounted

SE

GatestopfloormountedGate stop floor mounted

SF

Gate stop for weldingGate stop for welding

SG

Heavy duty overhead track systemSteel track, 200 kg capacity, 3m length

OTH

Wall bracketFor use with heavy duty overhead track system

OTH WB

Medium duty overhead track systemSteel track, 85 kilo capacity, 3M length

OTS

Double wheel assemblyFor use with medium duty overhead track system both steel and aluminium

OTA WA

Wall bracketFor use with medium duty overhead track system

OTS WB

Rubber end stopFor use with medium duty overhead track system both steel and aluminium

OTA ES

Lower guide trackGuide system for sliding doors. Heavy duty

LGT

Single wheel assemblyFor use with heavy duty overhead track system

OTH SW

Single swivel wheel assemblyFor use with heavy duty overhead track system

OTH SWS

Double wheel assemblyFor use with heavy duty overhead track system

OTH DW

Rubber end stopFor use with heavy duty overhead track system

OTH ES

Lower guide wheelGuide system for sliding doors. Heavy duty

LGW

Weld on wheel

80mm dia – Fits 16mm dia track. 300kg capacity WB80

140mm dia – Fits 20mm dia track. 600kg capacity WB140

Bolt through wheel

80mm dia – Fits 16mm dia track. 300kg capacity WA80



Bolt on wheel

80mm dia – Fits 16mm dia track. 300kg capacity WC80



Flush gate trackFor sliding gates, this track fits flush with the surface leaving no bump in the road. The trip hazard associated with traditional surface track is removed, also producing a professional appearance to your sliding gate project

Perfect for use in entrances used by solid wheel vehicles such as forklifts

SFTS20



‘Lock’ head

ing‘Lo

ck’ heading

39


38

Notes


[email protected]

01243 552066


[email protected]

01243 552066


40

‘Lock’ head

ing‘Lo

ck’ heading

locks & hardware for metal gates 2015/16for keyless entry through gates. this marine grade...

Documents