locker group pty. ltd. locker group (nz) limited · locker group offer a comprehensive range of...

MELBOURNE • SYDNEY • BRISBANE • TOWNSVILLE • DARWIN • ADELAIDE • PERTH • AUCKLAND • WELLINGTON • CHRISTCHURCH • SHANGHAI • MUMBAI

Locker Group Pty. Ltd.

2 Cojo Place, Dandenong South, Victoria 3175

Australia. ABN 99 004 353 922

Phone: +61 3 8791 1000 Fax: +61 3 8791 1099

Email: [email protected]

Website: www.locker.com.au

TOLL FREE 1800 635 947


Website: www.lockernz.co.nz

TOLL FREE 0800 285 837

Locker Group (NZ) Limited

12 Offenhauser Drive, East Tamaki,

Auckland New Zealand Coy No 101326

Phone: +64 9 273 9825 Fax: +64 9 274 5940





Phone: +61 3 8791 1000 Fax: +61 3 8791 1099



TOLL FREE 1800 635 947



TOLL FREE 0800 285 837




Phone: +64 9 273 9825 Fax: +64 9 274 5940

Locker Group offer a comprehensive range of conveyor belts including spiral woven wire, Rolmat and plastic hybrid belts to suit any conveyor application. Locker Group belts can be custom designed for all belt needs and requirements.

The following information provides a brief overview of the range of belts available through the Locker Group. Further specifications are available for each range through Locker Group Technical Data Sheets and through consultation with a Locker Group sales consultant.

Spiral Wire

The range of spiral wire belts are used

through a variety of industries from

food processing to heat treatment.

Spiral wire belts can be manufactured

from a range of materials including mild

steel or stainless steel, through to high

temperature alloys like Inconel 601®.

Belts are available in different wire

diameters, from 0.71mm to 8.0mm, and

widths to suit your application.

The woven spiral wire range includes:

Balance, Gratex, Cormel, Duplex,

Chain Driven, Lehr, Baking Bands, One

Directional.

PleaserefertoourTechnicalDataSheets

forfurtherinformation.

• High temperature use

• Small aperture belts available

• Friction Driven

Chain Driven

(for additional strength and control)

Balance

ChainDrive

Gratex

Cormel

OneDirectional

Advantage120

Plastic Hybrid

Hybrid belts combine the versatility of plastic with the strength of stainless steel. They’re ideal for a wide variety of applications, particularly the cooler temperature environments including seafood processing equipment through to freezer applications. Attachments such as side plate and cross flights combined with standard chain drive increase the range of applications further.

• Suitable for light products• No spotting issues caused by oily products

Lo Tension

The range of Lo Tension belts are designed to eliminate the need to transfer goods between belts. These belts operate in an extended range of temperatures; from cryogenic freezers to moderate temperature ovens. PleaserefertoourTechnicalDataSheets forfurtherinformation.

• Easy cleaning• Compact foot-print• Simple single drive

Spiral systems offer significant advantanges including decreased dwell time, a smaller footprint and increased production capacity. Spiral systems ranging up to 1400 metres long in a compact multi tier tower, offer easy cleaning and reduce wear on belts and other conveyor system components, typically reducing down time and replacement costs.





Phone: +61 3 8791 1000 Fax: +61 3 8791 1099



TOLL FREE 1800 635 947



TOLL FREE 0800 285 837




Phone: +64 9 273 9825 Fax: +64 9 274 5940

Omni-Grid®withOmniLite®O/Lay

Auxillary Drive

Cage/Drum

Tier Take-up





Phone: +61 3 8791 1000 Fax: +61 3 8791 1099



TOLL FREE 1800 635 947



TOLL FREE 0800 285 837




Phone: +64 9 273 9825 Fax: +64 9 274 5940

Rolmat

Rolmat belts provide a flat conveying surface

with maximum open area for free air and/or

water flow. Rolmat belts are the number one

choice as they overcome tracking errors,

and belt/pulley slip, while also providing

a very flat even surface, minimising wear

and tear. The belts are constructed with

precision formed wire ribbon joined by

straight connecting rods. Rolmat belts are

available in standard or heavy duty ribbons,

in a variety of materials, in any length or

width. The large open areas in Rolmat

belts allow for easy cleaning and airflow

for product cooling, making them ideal for

washing, cooling and baking applications.



• Large % Open Area

• High strength to weight ratio for

increased capacity

• Reduce tracking errors

• Reduce belt/pulley slip

Unigrid / Spiragrid

The Unigrid / Spiragrid belts can change

direction and travel along different

planes, hence they can be used to replace

several separate conventional units, each

with their own drive and transfer systems.

This contributes to reduce both the initial

installation cost and annual running

costs. The unique construction of this

range gives it the versatility for many

applications including freezing, heating,

drying, cooking or transportation. The

large open areas in either belt allow for

easy cleaning and airflow for product

cooling, while the optional overlay

available for Spiragrid adds additional

support where necessary.

Please refer to our Technical Data Sheets


• Large % open area

• Direction changes

• Different planes

Flex grid

Flex grid belts are ideal for lightweight

products in both straight-line and

turn conveyor applications. Flex grid

conveyors are constructed with parallel

wires, in a variety of steel grades, wire

sizes, and belt widths. Flex grid systems

use slider supports at, or near both

edges of the belt, on both the load and

return passes, rather than supports

under the full width of the belt. Flex grid

is sprocket driven, using two sprockets

on each head and tail shaft.



• Suitable for lightweight products

• Sprocket Driven

• Straight line, 90o or 180o turns

Uniflex

A highly flexible belt made up of

interlocking strands of high tensile wire.

These belts ensure perfect tracking as

they are positively driven by Stainless

Steel or Nylon Sprockets within the

wire mesh. Uniflex Belts have unlimited

applications in drying, washing, coating,

cooking, cooling and inspection to

name a few. The belts vary in number of

Spaces across the width, pitch and wire

diameter. Uniflex belts are made to an

overall width as requested.

Please refer to our Technical Data Sheets


• Large % area

• Sprocket driven

• Widely used in Confectionary and

Snack foods Industries

RolmatClenchedEdge

Unigrid

Uniflex

Spiragrid

Special Purpose

This range covers a wide variety; from

precision drive spiral belts to the eye link

range of belts complete with self cleaning

sprockets. Talk to your Locker Group

sales consultant about your application,

we’ll provide a solution to supply and

install a belt to your requirements.

The special purpose range includes: eye

link filter belts, rubber coated belts, beach

cleaning flat belts, and biscuit bands.

• Custom designed and manufacturedMELBOURNE • SYDNEY • BRISBANE • TOWNSVILLE • DARWIN • ADELAIDE • PERTH • AUCKLAND • WELLINGTON • CHRISTCHURCH • SHANGHAI • MUMBAI




Phone: +61 3 8791 1000 Fax: +61 3 8791 1099



TOLL FREE 1800 635 947



TOLL FREE 0800 285 837




Phone: +64 9 273 9825 Fax: +64 9 274 5940

FlexGrid





Phone: +61 3 8791 1000 Fax: +61 3 8791 1099



TOLL FREE 1800 635 947



TOLL FREE 0800 285 837




Phone: +64 9 273 9825 Fax: +64 9 274 5940

Belt Selection Process

Selection of the type of belt should be made in

conjunction with all the known features of the process

and application that will have any effect on the belt

performance. Consideration should be given to the

requirement for circulation for heating, cooling, washing

and drying mediums through the fabric. The diameter

of head, tail and other rollers require consideration, as

these determine the efficiency of drive and to a degree

the service life of the belt. The type and location of the

drive (as separate from the chain drive) also effect the

type of belt chosen.

In order to ensure the correct belt selection, it is

important to gather as much information as possible

regarding the requirements of your system. As you

understand the requirements of the system, you are in

the best position to provide this information. In some

circumstances the designer of the installation will also

hold some of the required details. In order for us to fully

understand your system and requirements, please refer

to and complete the Belt Specification Questionnaire,

Technical Data Sheet.



In addition to the conveyor belt products outlined

above, Locker Group’s wire division also manufactures

and supplies;

• A comprehensive range of woven wire mesh

• Wire Mesh rural flooring

• Wire & Poly Ripple screens

• Polyurethane and Rubber Screening panels

• Wedge Wire screens

• Piano Wire Screens

• Screening Unit Accessories.

A variety of screens are available to suit various

applications including food, beverage, petroleum,

chemical and petro-chemical industries, quarries and

mining.

TechnicalDataSheetsareavailablefor

furtherinformation,pleasevisit

www.locker.com.auorwww.lockernz.co.nz

locker group pty. ltd. locker group (nz) limited · locker group offer a comprehensive range of...

Documents