load cells and mounting kits - optima...
TRANSCRIPT
LOAD CELLS AND MOUNTING KITS
SINGLE POINT
BENDING BEAM
SHEAR BEAM
DOUBLE SHEAR BEAM
COMPRESSION-LOW PROFILE
COLUMN
COMPRESSION / TENSION
TENSION
PIN
FOR FOOT BRAKE
ANCHOR
WIRE ROPE MEASURING
MOUNTING KITS AND COMPLEMENTARY ACCESSORIES
LEVEL MEASUREMENTS - FALSE CELLS
2
LAUMAS offers a wide range of load cells of the most common types in the main industrial sectors providing for each of them the quality, availability and assistance.
Load cellsSingle point, shear beam, double shear, bending, tension, compression, low profile, pin, anchor, wire rope measuring, pre-amplified, column, foot brake, for weighing bridge, digital, load limiters.
Mounting kits for load cellsFor all load cells, LAUMAS is able to provide suitable weigh modules, with the aim of obtaining the correct application of the cell and maximum reliability and accuracy, and compatibly with the mechanical, electrical and pneumatic connections present on the weighing structure.
Production of load cells on CUSTOMER’S REQUEST
LAUMAS designs and manufactures “CUSTOM” load cells to offer the best solutions to customer needs. Customizations are designed to solve specific problems or meet particular needs of applications in special conditions.
• Pre-amplified load cells• Biaxial and triaxial• Two strain gauges Wheatstone bridges• Torque detection• Special cables high / low temperature with
non-standard thermal compensation
Load cells and mounting kits
Certifications
OIML R60 - International Organization of Legal Metrology
ATEX/IECEx - Directive 2014/34/EU - for use in potentially explosive atmosphere
NTEP - compliant to the metrological standards of United States and Canada
EAC - conforme aux normes de l’Union Douanière Eurasienne (Russie, Biélorussie, Kazakhstan)
IP69K - watertight protection against dust and water
Calibration report (ACCREDIA LAT traceability)
3
4
4/5
5
6
6
7
7
8
8
8
9
9
9
9
10
10
10
11
11
11/12
12
13/14
14
LOAD CELLS
SINGLE POINT
BENDING BEAM
SHEAR BEAM
DOUBLE SHEAR BEAM
COMPRESSION-LOW PROFILE
COLUMN
COMPRESSION / TENSION
TENSION (COMPRESSION)
TENSION
PIN
FOR FOOT BRAKE
ANCHOR
WIRE ROPE MEASURING
MOUNTING KITS FOR LOAD CELLS
for SINGLE POINT load cells
for BENDING BEAM load cells
for SHEAR BEAM load cells
for DOUBLE SHEAR BEAM load cells
for COMPRESSION-LOW PROFILE load cells
for COLUMN load cells
COMPLEMENTARY ACCESSORIES FOR LOAD CELLS
LEVEL MEASUREMENTS - FALSE CELLS
4
5, 15, 50
0.25, 0.5, 1
3, 5, 6, 10, 15, 20, 30, 50
6, 15, 30, 50
3, 6, 15
30, 50
10, 15, 20, 30, 50, 100
10, 20, 50
100, 200, 300, 500
10, 30, 50, 100, 200
30, 50, 75, 100, 150
60, 100, 150, 200, 300
150 x 150 mm
200 x 200 mm
250 x 350 mm
350 x 350 mm
250 x 400 mm
400 x 600 mm
400 x 400 mm
400 x 400 mm
800 x 800 mm
400 x 400 mm
400 x 400 mm
400 x 400 mm
IP65
IP65
IP65
IP67
IP65
IP65
IP68
IP67
IP67
IP65
≤ ±0.05%
3 mV/V ±5%
≤ ±0.03%
1-2 mV/V ±15%
≤ ±0.02%(0.017% C4; 0.014% C5)
2 mV/V ±10%
≤ ±0.02%
2 mV/V ±10%
≤ ±0.02%
2 mV/V ±10%
≤ ±0.02%(0.017% C4)
2 mV/V ±10%
≤ ±0.02%(0.017% C4)
2 mV/V ±10%
≤ ±0.03%
2 mV/V ±10%
≤ ±0.02%
2 mV/V ±10%
≤ ±0.02%(0.017% C4; 0.014% C5)
2 mV/V ±5%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
AFAS
ALL
PRC
AUAZ
LAZ
SPT
CAM
AZLI
-
LOAD CELLS
SINGLE POINT
Special steel
Aluminum alloy
Aluminum alloy
AISI 420stainless steel
Aluminum alloy
Aluminum alloy
17-4 PHstainless steel
AISI 420stainless steel
AISI 420stainless steel
Aluminum alloy
for capacities:15, 20, 30, 50 kg
for capacities:10, 20, 50 kg
IP69K: Declaration of conformity + IP69K marking protection rating
Stainless steel + rubber waterproof kit
CAPACITY kg PLATFORM
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
page 10page 14
page 10
page 10page 14
page 10page 14
page 14
page 14
For all models on request: II 1GD (zone 0-1-2-20-21-22) -
5
50, 100, 150, 200, 300, 500
75, 150, 300, 500
600 x 600 mm
600 x 600 mm
IP65
IP67
≤ ±0.02%(0.017% C4)
2 mV/V ±10%
≤ ±0.02%
2 mV/V ±10%-
500, 1000
1000, 2000
800 x 800 mm
1200 x 1200 mm
IP65
IP65
≤ ±0.02%
2 mV/V ±10%
≤ ±0.02%
2 mV/V ±10%
- -
-
-
-
-
APL
PEC
ARAT
L
5, 10
20, 50, 100, 200, 350, 500
30, 50, 75, 150, 300, 500
50, 75, 150, 300
75, 150, 300
75, 150, 300
IP68
IP68
IP68
IP68
IP67
IP67
≤ ±0.02%
2 mV/V ±1%
≤ ±0.02%(0.017% C4)
2 mV/V ±1%
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.017%
2 mV/V ±0.1%
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.02%
2 mV/V ±0.4%
-
-
-
-
-
-
-
-
FCK
FCOL
FCAX
FCAL
FTP
FTK
LOAD CELLS
SINGLE POINT
CAPACITY kg PLATFORM
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
Aluminum alloy
AISI 420stainless steel
Aluminum alloy
Aluminum alloy
Stainless steel + rubber waterproof kit
for capacities:150, 200,300, 500 kg page 14
page 14
BENDING BEAM
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
17-4 PHstainless steel
17-4 PHstainless steel
AISI 420stainless steel
17-4 PHstainless steel
AISI 420stainless steel
Special steel
for capacitiesfrom 50 to 500 kg
page 10page 13page 14
page 10page 13page 14
page 10page 13page 14
page 10page 11page 13
page 10page 13page 14
page 10page 11page 13
For all models on request: II 1GD (zone 0-1-2-20-21-22) -
6
500, 1000, 2000, 3000, 5000
500, 1000, 2000
500, 1000, 1500, 2000, 3000, 5000
300, 500, 1000, 2000
500, 1000, 2000, 5000
500, 1000, 2000, 5000, 7500, 10000
750, 1000, 1500
500, 750, 1000, 1200, 1500, 2000, 3000, 5000, 10000
5000, 10000
25000
IP68
IP68
IP67
IP68
IP67
IP68
IP68
IP68
IP68
IP68
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.02%(0.017% C4;0.014% C5)
3 mV/V ±0.4%
≤ ±0.017%
2 mV/V ±0.1%
≤ ±0.02%
3 mV/V ±0.4%
≤ ±0.02%(0.017% C4)
2 mV/V ±0.4%
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.02%
2 mV/V ±0.4%
≤ ±0.1%
1 mV/V ±0.5%
≤ ±0.02%
2 mV/V ±0.2%
-
-
-
-
-
-
-
-
-
-
-
-
FTK
FT-P
FTKL
FTL
FTZ
FTZA
FCAX
FTP
FTH
DTL
LOAD CELLS
SHEAR BEAM
DOUBLE SHEAR BEAM
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
Special steel
17-4 PHstainless steel
Special steel
17-4 PHstainless steel
17-4 PHstainless steel
17-4 PHstainless steel
AISI 420stainless steel
AISI 420stainless steel
Special steel
Special steel
capacities from1000 to 5000 kg
IP69K: Declaration of conformity + IP69K marking protection rating
capacities from5000 to 10000 kg
capacities from500 to 2000 kg
capacities from500 to 2000 kg
Suitable for on-board vehicle weighing
page 10page 11page 13
page 10page 11page 13
page 10page 11page 13
page 10page 11page 13
page 10page 11page 13
page 11page 14
page 10page 11page 13
page 10page 13page 14
For all models on request: II 1GD (zone 0-1-2-20-21-22) -
7
15000, 25000, 50000
COK-AR 25000
25000
30000, 60000
30000
IP68
IP68
IP68
IP68
≤ ±0.02%
2 mV/V ±0.1%
≤ ±0.017%
2 mV/V ±0.1%
≤ ±0.013%
2 mV/V ±0.1%
≤ ±0.013%
200000 ±0.05% counts (RS485)
-
-
-
-
COK
COCO
LCO
LD
200, 500, 1000, 2500
1000, 2000, 5000
250, 500, 1000, 2500, 5000, 7500, 10000, 12500, 15000, 30000, 50000, 100000
15000, 30000, 50000
200000, 300000, 500000, 750000
IP67
IP68
IP68
IP68
IP68
≤ ±0.5%
1 mV/V ±10%
≤ ±0.03%
2 mV/V ±0.4%
≤ ±0.03%(0.02% C3)
2 mV/V ±0.1%
≤ ±0.035%
2 mV/V ±0.1%
≤ ±0.10%
2 mV/V ±0.1%
-
-
-
-
-
-
-CKCL
SCB
XCB
LSCB
L
LOAD CELLS
COLUMN
Special steel
17-4 PHstainless steel
17-4 PHstainless steel
17-4 PHstainless steel
anti rat cable
page 11page 12
page 12
page 11page 12
page 11page 12
COMPRESSION-LOW PROFILE
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
17-4 PHstainless steel
AISI 420stainless steel
17-4 PHstainless steel
17-4 PHstainless steel
17-4 PHstainless steel
capacities from2500 to 10000 kg
• 10 m long cable version.• Calibration report (ACCREDIA LAT
traceability).• Two redundant strain gauges
Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• AISI 420 stainless steel version (not OIML approved).
• IP69K: Declaration of conformity + IP69K marking protection rating
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
capacities from2500 to 12500 kg
page 11page 13
page 12page 14
page 12page 14
page 14
For all models on request: II 1GD (zone 0-1-2-20-21-22) -
8
15, 30, 60
25, 100, 200, 300, 500, 1000, 2500
500, 1000, 2500, 5000
50, 100, 200, 300
100, 200, 300, 500, 1000, 2500, 5000, 7500, 10000, 12500
5000, 10000, 20000
30000, 40000, 50000, 60000, 100000, 250000
2000, 5000, 10000*, 20000*
500, 1000, 2000, 5000, 10000, 20000, 30000, 60000, 100000*, 150000*, 200000*
IP65
IP67
IP67
IP68
IP68
IP68
IP67
IP68IP67*
≤ ±0.02%
2 mV/V ±10%
≤ ±0.02%(0.017% C4)
2 mV/V ±0.2%
≤ ±0.03%
2 mV/V ±0.4%
≤ ±0.02%
2 mV/V ±0.1%
≤ ±0.03%
2 mV/V ±0.1%
≤ ±0.08%
1.0 mV/V ±0.1%
≤ ±0.05%≤ ±0.1% *
2 mV/V ±0.3%
≤ ±0.05%
2 mV/V ±0.3%
-
-
-
-
-
-
-
-
-
-
-
-
SASL
CTOL
CTL
TAL
CLCL
KTB
T
LOAD CELLS
TENSION (COMPRESSION)
TENSION
COMPRESSION / TENSION
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
Special steel
Special steel
AISI 420stainless steel
17-4 PHstainless steel
17-4 PHstainless steel
17-4 PHstainless steel
Special steel
17-4 PHstainless steel
capacities from100 to 2500 kg
capacities from500 to 12500 kg
capacities from100 to 2500 kg
Can also be used as load limiter for lifting equipment
Can also be used as load limiter for lifting equipment
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• IP69K: Declaration of conformity + IP69K marking protection rating.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
page 13
page 13
page 13
page 13
For all models on request: II 1GD (zone 0-1-2-20-21-22) -
9
5000, 10000, 20000
100
30000, 50000, 75000, 100000, 125000, 150000, 180000, 250000
20004000100002000040000
IP67
IP65
IP68
IP67
≤ ±0.1%
1 mV/V ±0.1%
≤ ±0.08%
1 mV/V ±0.2%
≤ ±0.1%
2 mV/V ±0.1%
3 mV/V ±0.1%
-
-
-
- -
-
-
-
6-1410-1816-2624-3624-36
LAU
LPED
CAFU
N
LOAD CELLS
PIN
FOR FOOT BRAKE
ANCHOR
WIRE ROPE MEASURING
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KIT
17-4 PHstainless steel
Aluminum
17-4 PHstainless steel
Special steel
Can also be used as load limiter for lifting equipment
Suitable as load limiter for lifting equipment
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
• Calibration report (ACCREDIA LAT traceability).
• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.
Switching accuracy ±2% on Full Scale
page 14
CAPACITY kg
MATERIAL
PROTECTIONRATING
COMBINED ERROR
RATED OUTPUT
OIML R60CERTIFICATION
OPTIONSON REQUEST
KITROPE Ø mm
10
T8-AZLIT8-AZLT8-AZST8-AM
AZL, AZLI, AZS, AM
TFC-GP
TFC-FSB
TFC-PVTFC-PV10
FCK, FCOL
FCK, FCOL
FCK, FCOL
TF-PVTF-PVZ
TF-PV-2000
FCALFCAX: 30÷500 kg
FCALFCAX: 30÷500 kgFCAX: 750÷1000 kg
FCAL
FCAX: 30÷500 kg
FCAL
FCAX: 30÷500 kg
FCALFCAX: 30÷500 kg
FCALFCAX: 30÷500 kgFCAX: 750÷1500 kg
FCAL
FCAX: 30÷500 kg
FCAX: 750÷1500 kg
TF-FSB
TF-AST
T12-FCA-GP
TF-GP
TF-GP-2000
T12-FTA-GP
FTL, FTKL, FT-P, FTZ
FTK: 75÷300 kgFTK: 500÷2000 kg
FTP: 75÷300 kgFTP: 500÷2000 kg
MOUNTING KITS FOR LOAD CELLS
for SINGLE POINT load cells
for BENDING BEAM load cells
MODELAPPLICATIONRANGE
DESCRIPTION FOR LOAD CELLS
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in galvanized steel; constraint against lateral forces and anti-tilt by self-centring galvanized steel joint foot; adjustable height.
Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.
Mounting kit provided with compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in AISI 304 stainless steel; constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel (TF-PV, TF-PV-2000) or in galvanized steel (TF-PVZ); limited height adjustment.
Mounting kit provided with compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.
Mounting kit provided with tension ball joint in aluminum alloy; lower plate and block in AISI 304 stainless steel; galvanized screws.
Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate, block and screws in galvanized steel.
Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate, block and screws in galvanized steel.
Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.
B
B
B
B
BS
BS
B
S
BS
BS
from 10 to 300 kg
from 5 to 500 kg
from 5 to 500 kg
from 5 to 200 kg
from 30 to 500 kg
from 30 to 1000 kg
from 30 to 500 kg
from 30 to 500 kg
from 30 to 500 kg
from 30 to 1500 kg
from 30 to 1500 kg
from 75 to 2000 kg
B = bending beam load cell; S = shear beam load cell
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in AISI 304 stainless steel; constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.
11
PVPVZ
TF-PS 2000
PV80
PV80Z
PS
PS10T
VCOKDTL
TF500
TF2000TF2000Z
10000 kg
FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500 kgFTP: 75÷300 kgFTP: 500 kg
FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500÷2000 kgFTP: 75÷300 kgFTP: 500÷2000 kg
FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500÷2000 kgFTP: 75÷300 kgFTP: 500÷2000 kg
FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500÷2000 kgFTP: 75÷300 kgFTP: 500÷2000 kg
FTP: 3000÷5000 kgFTZ: 5000 kg
FTP: 3000÷5000 kgFTK: 3000÷5000 kgFTZ: 5000 kg
FTK: 3000÷5000 kg
FTP: 10000 kg
DTL
COLCOLDCOK
PVCLS
PV80CLS
PSCLS
5000 kg
5000 kg
CLS: 1000÷2000 kg
CLS: 5000 kg
CLS: 5000 kg
MOUNTING KITS FOR LOAD CELLS
for SHEAR BEAM load cells
for DOUBLE SHEAR BEAM load cells
MODELAPPLICATIONRANGE
DESCRIPTION FOR LOAD CELLS
Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.
Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts.
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV80); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.PV80: lower plate and block in AISI 304 stainless steelPV80Z: lower plate and block in galvanized steel
Hot worked galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.
for COMPRESSION-LOW PROFILE load cells
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV80); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.
Hot worked galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.
from 1000to 2000 kg
from 75 to 2000 kg
from 75 to 2000 kg
from 75 to 2000 kg
from 3000to 5000 kg
from 3000to 5000 kg
from 15000to 50000 kg
from 75 to 500 kgBSBS
S
S
S
SS
BSBS
BSBS
BSBS
B = bending beam load cell; S = shear beam load cell
Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber.TF500: lower plate, block and screws in AISI 304 stainless steelTF2000: lower plate, block and screws in AISI 304 stainless steelTF2000Z: lower plate, block and screws in galvanized steel
Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); constraint against lateral forces and anti-tilt by self-centring joint foot; adjustable height.PV: lower plate, block and foot in stainless steelPVZ: lower plate, block and foot in galvanized steel
12
KIT_COK
KIT_COL
KIT_CO
PIA_CO25000 kg
COKCOK-AR
COLCOLD
CO
V15000
V30000
V100000
P10000+BASESUP
BASEINF+BASESUP
PIASTRA+BASEINF
CBL: 15000 kg*CBX: 30000 kg
CBL: 30000 kg*CBX: 50000 kg
CBL: 50000÷100000 kg*CBX: 50000 kg
CBL: 250÷12500 kg
CBX: 15000 kg
CBL: 250÷12500 kg
CBX: 15000 kg
CBL: 250÷12500 kg
CBX: 15000 kg
V10000V10275
CBL: 250÷12500 kg
CBX: 15000 kg
MOUNTING KITS FOR LOAD CELLS
for COMPRESSION-LOW PROFILE load cells
for COLUMN load cells
MODELAPPLICATIONRANGE
DESCRIPTION FOR LOAD CELLS
Mounting kit composed by protective rubber seal, 2 bases (upper and lower) and 3 self-centring cylindrical plates.KIT_COK: special steelKIT_COL: AISI 420 hardened steel
Kit composed by 2 stainless steel bases.
Kit composed by 2 special steel plates (upper and lower) for KIT_CO bases.
Lower plate and turned upper base in AISI 304 stainless steel.
Turned upper and lower bases in AISI 304 stainless steel.
Lower plate and turned lower base in AISI 304 stainless steel.
AISI 304 stainless steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; laminas against lateral forces, anti-tilt and jack functions.
from 15000to 30000 kg
from 30000to 50000 kg
from 50000to 100000 kg
from 250to 15000 kg
from 250to 15000 kg
from 250to 15000 kg
from 15000to 50000 kg
from 30000to 60000 kg
AISI 304 stainless steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; laminas against lateral forces, anti-tilt and jack functions.
from 250to 15000 kg
* with adapter (page 14)
13
PIEDINOSB2M8PIEDINOSB2M10PIEDINOSB2INOXPIEDINOSB2M20PIEDINOSB2ZNCM8PIEDINOSB2ZNCM10PIEDINOSB2ZNCPIEDINOSB2ZNCM20
SNODOGE12AX
SNODOGE20AXKIT
ACCSFERM12
PPV
ANTIV35ANTIV40ANTIV45
ACCSFERM20
PPV80
SNODOGE25AXKIT
M8 x 1.25 mm max 500 kgM10 x 1.50 mm max 500 kgM12 x 1.75 mm max 2000 kgM20 x 2.50 mm max 5000 kgM8 x 1.25 mm max 500 kgM10 x 1.50 mm max 500 kgM12 x 1.75 mm max 2000 kgM20 x 2.50 mm max 5000 kg
M12 x 1.75 mm
M20 x 2.50 mm
FCAL, FCAX, FCOL, FTK, FTKL, FTL, FTP, FT-P, FTZ
CLS, FTK, FTKL, FTL, FTP, FT-P, FTZ
FTKL, FTL, FTP, FT-P, FTK, FTZ, CLS
FTK, FTKL, FTL, FTP, FT-P, FTZ
FCOL, FCKFTKL, FTL, FCAL, FCAX, FTP, FT-P, FTK, FTZ CLSFCAL, FCAX
CLS 5000 kg, FTK 3000-5000 kg, FTKL,FTZ 5000 kg
FTK, FTKL, FTP 3000-5000 kg,FTZ 5000 kg, CLS 5000 kg
FTK, FTP, FTZ
FTP 10000 kg
EM6EM8EM10EM12EM16
M6 x 1.00 mmM8 x 1.25 mmM10 x 1.50 mmM12 x 1.75 mmM16 x 2.00 mm
SASLSLSL, CTOL, CTLCTOL, CTL
EM20EM25EM30EM35
M20 x 1.50 mmM24 x 2.00 mmM30 x 2.00 mmM36 x 3.00 mm
SL, CTOL, CTLCTOL, CTLCTLCTL
COMPLEMENTARY ACCESSORIES FOR LOAD CELLS
Self-centring joint foot
Spherical plain thrust bearings to compensate for misalignment
Ball-and-socket joint
Accessory with ball
Adjustable upper plate
Compression joint
MODEL DESCRIPTION
MODEL MODELDESCRIPTION DESCRIPTION
FOR LOAD CELLS
FOR LOAD CELLS FOR LOAD CELLS
Steel joint.
Kit composed by steel joint + galvanized bolt (20x80 mm) and washer (22x60 mm).
Kit composed by steel joint + galvanized bolt (24x100 mm) and washer (26x72 mm).
stainless steelstainless steelstainless steelstainless steelgalvanized steelgalvanized steelgalvanized steelgalvanized steel
stainless steel / max static load 2000 kg
AISI 304 stainless steel plates for self-centring joint foot.
Stainless steel + rubber joints, to compensate for misalignment of the support plates:
Ø25x63 mm; M8 x 1.25 mm; max static load 500 kg
Ø30x75 mm; M12 x 1.75 mm; max static load 2000 kg
Ø30x79 mm; M12 x 1.75 mm; max static load 2000 kg
stainless steel / max static load 5000 kg
14
ALL
AZS, PRC
AZL, AM
APL
PEC
FCK, FCOLFCAX, FCAL
DTL
AM, APL
CA
BLOCPRC
BLOCT8Z
BLOCAPL
BLOCPEC
STAFFE -FC/FCA
PIATTODTL
CBL250-10000 - CBX15000CBL15000 - CBX3000CBL30000 - CBX5000CBL50000-100000
FCAL-FCAXFCK-FCOLFTK75-2000FTP75-2000FTL300-2000FTZ500-2000FTK3000-5000FTP3000-5000
-
-
CBLCBX
CBL: 15000 kgCBX: 30000 kgCBL: 30000 kgCBX: 50000 kgCBL: 50000÷ 100000 kg
CBX: 15000 kg
CBX: 30000 kg
CBX: 50000 kg
TENDITORE300
PTEND
STAFFEALL
IP68 -AM/APL
BASESUPFIL
BINF100
BINF126
BINF165
ADAT100CBX15T
ADAT126CBX30T
ADAT165CBX50T
BOTTONE200
BOTTONE
BOTTONE750
PIAS50CASUPPIAS75CASUPPIAS120CASUPPIAS165CASUPPIAS225CASUP
PIAS50CAINFPIAS75CAINFPIAS120CAINFPIAS165CAINFPIAS225CAINF
Ø110x22 mm
Ø140x23 mm
Ø180x23 mm
Ø100x6 mm
Ø126x9 mm
Ø165x29 mm
Ø98x25 mmØ98x27.5 mmØ150x27.5 mmØ199x30 mmØ250x30 mm
Ø170x25 mmØ170x25 mmØ240x30 mmØ290x30 mmØ330x35 mm
F
F F
F
C C
F
F
C
CML
CBLS: 500000÷ 750000 kg
CBLS: 300000 kg
CBLS: 200000 kg
Pair of tension stainless steel brackets (max 50 kg)
Stainless steel drawn block31x30 mm; tickness 10 mm
Galvanized steel drawn block36x35 mm; tickness 10 mm
Stainless steel drawn block60x43 mm; tickness 5 mm
Stainless steel drawn block50x32.5 mm; tickness 5 mm
Pair of tension stainless steel brackets:max static load: 100 kgmax static load: 300 kg
Galvanized steel plate210x80 mm; tickness 12 mm
Upper plate
Galvanized steel upper / lower plate for load distribution
LEVEL MEASUREMENTS - FALSE CELLSCAPACITY kg MATERIAL DESCRIPTION
Stainless steel
“False cells” (ML) are structural mechanical steel elements that can be used in combination with the load cells for measuring the level of liquid or weighing powder products that do not require a high degree of precision. False cells feature similar dimensions to the load cells and can be mounted on the same accessories as the latter.
- Structure with 3-point support = 1 load cell + 2 false cells- Structure with 4-point support = 2 load cells + 2 false cells
Galvanized steelSignal mV x 3 Signal mV x 2 Signal mV x 2
C = SUPPORT FOOT WITH LOAD CELLF = SUPPORT FOOT WITH FALSE CELL
Stainless steel + rubber waterproof kit
MODEL / DESCRIPTION MODEL / DESCRIPTIONFOR LOAD CELLS FOR LOAD CELLS
Galvanized steel stay rod with dual ball-and-socket joints suitable for static applications, to be placed horizontally.Working load: 2500 kgBreaking load: 10000 kg
Threaded upper base in AISI 304 stainless steel for compression load cells
Galvanized steel anchor plate for TENDITORE300
Turned lower base in AISI 304 stainless steel for compression load cells:
AISI 304 stainless steel adapter for mounting kits:V15000, V30000, V100000.
Ø119 mm; tickness 60 mm
Ø198 mm; tickness 60 mm
Ø198 mm; tickness 89 mm
15
www.laumas.com
By scanning the QR code, you can access directly with your smartphone or tablet to our web site where consult the items on catalog and find the information; it’s also possible discover the full range of Laumas products.
The application is available for free on the Apple App Store (iOS), Google Play (Android), Windows Phone or Blackberry App World Store.
JUNCTION BOXES
Stainless steel or ABS junction boxes, including equalization boards or parallel connection boards, to connect from 1 to 4 or from 5 to 8 load cells.IP67 protection rating.Lightning and electrical shock protection versions.ATEX II 1GD certified versions.
Watch the presentation video of each product.
PRODUCT VIDEOS on www.laumas.com
w w w . l a u m a s . c o mLAUMAS ELETTRONICA SRLVIA I MAGGIO N. 643022 MONTECHIARUGOLO (PR) - ITALY
PHONE (+39) 0521 683124FAX (+39) 0521 681091
EXPORT SALES DEPARTMENT: [email protected] follow us