lntertek - regent products 16 cfr 1500 california tableware safety programs - ceramic or pewter or...

G t81J-L(

lntertek

Target Corporation Hardlines Test Report

Number: SZHH00650829

Ben N.L. Lin General Manager

lntertek Testing Services Shenzhen Ltd.-TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: (86-755) 2602 0111 Fax: (86-755) 2683 7118/9 Poslcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

To be continued

of 33

lntertek

Target Corporation


Hardlines Test Report

Applicant: ANKYO DEVELOPMENT L TO. RM.703-4,7/F.,N0.4-5 KNUTSFORD TERRACE, T .S. T ,KLN

Date: Dec 12, 2011

Attn: MILLER SZE

Testing Stage Top of Production

Overall Rating Satisfactory

R I f eport n ormat on Retest - Previous Report Numbers --Related Reports ISZHH00638342-Pre-Production. lfarget Test Protocol rTRGT -8000-US. Supplemental Protocol rTRGT -9067 -US TRGT -6572-US. Lab Identification IShenzhen Hardlines. Product Category ITovs. Service Requested Reaular. Date In Dec 05,2011. Date Out Dec 12 2011. Turn Around Time 5. Order Type Store Order. TCPS Black Seal Numbers 0001844.

V d /F I f en or actory n ormat on Vendor Name ~nkvo Development Ltd. Vendor 10 Number 1200809. Vendor Phone Number as2-2424 7366. BPM Factory Name Puiianr:~ Jintailanr:~ Toy Factory. BPM Factory 10 16820205. Email Distribution rniller~~~kyoltd.com;[email protected];[email protected];annchao@ankyoltd

.cn·info ankvolld.com.

······································•*******************************************·····················································


Tel: (86-755) 2602 0111 Fax: (86-755) 2683 7118/9 Poslcodo: 518067 Attention Is drawn to the terms and conditions printed overleaf.

To be continued

of 33

lntertek


Product Information Product Description Brand I Program Name

ountry of Origin Department Number DPCI's/UPC

rres!Tvpe Style Number Package Provided Testing Quantity

s I I f tl ample n orma on Sample Identification

P k I & L b I' Cl I ac agmg a e mg • ams vlaims Claims Listed on TRF ulaims on Packaging/Labeling


Novelty Squirter. No Brand Name/Water Toys. vhina. 234. A 234/09/0058 886804001760 B 234/09/0058 886804001777 c 234/09/0058 886804001784 D 234/09/0058 886804001791 E 234/09/0058 886804001838 F 234/09/0058 1886804001845 uiiTest. -

!Yes. 190 Pieces.

(A) Novelty Squirter (Orange)-DPCI: 234/09/0058 (Full Test).

(B) Novelty Squirter (Biue)-DPCI: 234/09/0058 (Partial Test).

(C) Novelty Squirter (Purple)-DPCI: 234/09/0058 (Partial Test).

(D) Novelty Squirter (Green)-DPCI: 234/09/0058 (Partial Test).

(E) Novelty Squirter (Pink)-DPCI: 234/09/0058 (Partial Test).

(F) Novelty Squirter (Yellow)-DPCI: 234/09/0058 (Partial Test).

No. --

To be continued

of 33 lntertek Testing Services Shenzhen Ltd.-TFH Division

7/F., ShekouTechnology Main Building, lnduslrial7lh Road,Shekou,Shenzhen, China Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Poslcode: 518067

Attention Is drawn lo lho terms and conditions printed overleaf.

lntertek

Target Corporation



Executive Summary:

Protocol Test Property

TRGT -9067 -US Labeling

TRGT-8000-US Labeling

TRGT -8000-US Analytical

TRGT-8000-US Hazards

TRGT-8000-US Flammability Properties

TRGT-8000-US Workmanship

TRGT -8000-US Performance

TRGT-8000-US Colorfastness

TRGT-6572-US CA Prop 65 Review

Remarks : S = Satisfactory, NA = Not Applicable

Remark:

Sample Rating

All s All s All s All s All s All s All s All NA

All s

1. Please refer to the grouping form for actual tests conducted on the selected items.

Comments

Should you have any query on this report, you may contact Victor Wang at [email protected]; Kelly Gao at [email protected] ································••**********************************************"********"*******************************************


Tel: (86-755) :2602 0111 Fax: (86-755) 2683 7118/9 Poslcode: 518067 Allenllon Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



TARGETCORP.TESTPROTOCOL

TRGT·8000·US Toys (ASTM F963·08) V29

Testing Evaluation Citation/ Criteria

Method Supplemental Protocols *California TRGT-6572-US All samples should be reviewed against the Proposition 65 requirements of California Proposition 65 to determine if

additional testing or labeling is required.

Target packaging TRGT-9067-US Products in final retail packaging or open stock shall be and Labeling evaluated to the Target Packaging and Labeling requirements Requirements Protocol (TRGT -9067 -US) • Packaged TRGT -9000-US/ All samples shall be reviewed and tested to the product transit ITS-00000-GL appropriate requirements of protocol TRGT-9000-US/ITS-testing- if 00000-GL "Packaged Product Transit Testing". appJicable Electrical Safety ANSI/UL 696 [Standard for Electric Toys] Risk

3 Star Audit Shall pass electrical safety audit. Complete test package Audit - ANSI/UL provided upon request 696-3 STAR Electrical Safety UL697 [Standard for Toy Transformers] Risk

3 star audit Shall pass electrical safety audit. Complete test package Audit - ANSI/UL provided upon request 697-3 STAR Electrical Safety ANSI/UL 1310 [Standard for Class 2 Power Units] Risk

3 Star Audit Shall pass electrical safety audit. Complete test package

Audit - ANSI/UL provided upon request 1310-3 STAR Electrical Safety ANSI/UL 2089 [Standard for Vehicle Battery Adapters] Risk 3 Star Audit Shall pass electrical safety audit. Complete test package Audit - ANSI/UL provided upon request 2089-3 STAR

*Flammability- TRGT -3001-US [Indoor Item ONLY] California Shall meet the applicable requirements specified in the technical bulletin protocol 116 and 117 *Electronic CPSD-4999.9- Shall meet the requirements specified in CPSD-4999.9-products NA NA

Result

See Supplemental

Protocol TRGT-6572-US

See Protocol TRGT -9067 -US

NR

NA

NA

NA

NA

NA

NA

································································••*•******************************************************************


Tel: (86-755} 2602 0111 Fax: (86·755} 2683 7118/9 Poslcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Testing Evaluation Citation/ Criteria Result

Method Labeling *Mercury labeling Various state Toys with button cell batteries cannot have the mercury NA and registration - laws including: warning labeling. Item fails testing if this warning is as applicable to NY: Chap 145, present. button cell battery powered devices Title 21 Ch. Item must comply with the mercury limits (as noted in - not applicable 27 2101-2115 safety requirements below). to rechargeable Modified (Modification = not allow labeling) batteries CT: CGS

Section 22a-619, IN IC 13-29-17.5

Parts Labeling Visual Shall match the actual content if present s Accuracy or Visual Shall be legible and easy to understand; instructions s adequacy of shall be consistent with sample performance instructions Age grading ASTM F963-08 All products shall be tested according to either the Label age grade:

Annex A1/ appropriate age grade, as determined by lntertek, or the ages 4+

Section 5.2 labeled age grade if it is more stringent. In the event the Appropriate age sample is not age labeled, lntertek will determine the

appropriate age grade and test accordingly grade: over 1 years

All toys or their package must contain a labeled age grade. If labeled age grade is noted as N/A (not available) the product will be resulted as fail.

Stuffed toys Pennsylvania, Stuffed toys shall have a tab or label securely affixed NA labeling Ohio, and which contains:

Massachusetts A statement that "All New Material" was used Stuffed Toy -Labeling Law - Type of material

- The assigned state registration (Pennsylvania at a minimum)

number

- The name and principal place of business (city and state) of the manufacturer or vendor

···························•************************************************'************************************************** •• • •••••



of 33

lntertek

Target Corporation




Method Toy labeling ASTM F963-08 Shall have special labeling for specific features such as s

Section 4-7 but not limited to:

- Aquatic Toys

- Crib And Playpen Toys - Mobiles

- Strollers And Carriages - Toys Intended To Be Assembled By An Adult

- Simulated Protective Devices

- Toys With Functional Sharp Edges And Sharp Points - Small Objects, Small Balls, Marbles and Balloons

- Toy Caps

- Art Materials

- Electric Toys

- Battery-Operated Toys

- Battery-Powered Ride On Toys

- Toys In Contact With Food

- Magnets

Packaging, literature accompanying toys, and point-of-sale presentations shall not use words, statements, or graphic material that are inconsistent in any way with the safety labeling instructions for use assembly or age grading of the toy. Information and instructions provided for the safe use or assembly of a toy shall be easy to read and understand by persons of the age level for whom the toy is intended. Shall be in the English language at a minimum.

Either a principal component of a toy or the packaging of a toy shall be marked with the name and address of the producer or the distributor.

Labeling 16CFR Self-pressurized containers shall conform to the labeling NA requirements for 1500.130 requirements as defined by 16 CFR 1500.130 self pressurized containers .......................................................................................................................................


Tel: (86-755) 2602 0111 Fax: (86-755) 2683 711819 Poslcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation




Method Bedding and Association of Ali filling materials shall have a securely affixed tag or NA upholstered Bedding and label which contains the following information: furniture labeling Furniture - The statement, "UNDER PENALTY OF LAW THIS

TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER"

- A description of the filling contents preceded by the statement, "ALL NEW MATERIALS CONSISTING OF"

- The assigned state number (i.e. REG. NO. PA") - The statements, "Certification is made by the

manufacturer that the materials in this article are described in accordance with law".

Toy Gun Marking 15CFR1150 Sample shall comply with the requirements as defined in NA 15CFR1150

* Labeling review: 16 CFR 423 Shall have a label securely affixed that contains regular NA care care (customary and routine) information. * Labeling review: 16 CFR 423 Shall be tested to substantiate care label content. NA care Wearing apparel which is not required to contain a care

label but has a label present shall be laundered according to label instructions only. A general appearance evaluation shall be conducted.

Labeling review 16 CFR 300 I Shall have a label securely affixed that contains: NA fiber 303

The name and manufacturer or other marketing -or registration number

- The country of origin - The generic name and percentage of ali fibers in the

product * Labeling review: 16 CFR 300 I [Quantitative fiber identification- if claimed] NA fiber 303 Shall be tested to substantiate fiber content. Shall not

exceed a deviation of ± 3% from the label as allowed for blends and no deviation for items labeled 100% of a fiber.

Warning or Visual [PARTY POPPER ONLY] NA cautionary Shall bear the following or it's equivalent warning statements statements

WARNING: PULL POPPER AWAY FROM FACE . •••••••••• •• * •••••••••••••••••••••••••••••••••• ** ••••••••••••••••••••• **** ••••••• * ••••••• ** •••• * ** •••••••••• ** ••••••• * * •••••••••••••••



of 33

lntertek



Evaluation

• Chemistry set labeling 16 CFR

Hazardous materials labeling review 16 CFR 1500 California tableware safety programs -ceramic or pewter or enamel metalware • Food labeling I food ingredient list review

Testing Citation/ Method 16 CFR

500.83(a)(23)

16 CFR 1500.14(b)

(1-5)

California Health and Safety

Code Section 108870

21 CFR 101/21 CFR 73,

74, 82, & 170-189

Criteria

Chemistry sets, science education sets and replacement chemicals for such sets, are exempt from section 2(p)(1) of the Federal Hazardous Substances Act if (i) the immediate container of hazardous chemical bears on its main panel the name, appropriate signal word, and additional statement "Read back (or side) panel before using" and bears on the back (or side) panel the remainder of the appropriate cautionary statement; (ii) the experiment manual or other instruction book or booklet bears the following caution statement within the borders of a rectangle and in the type size specified in 1500.121: WARNING - This set contains chemicals that may be harmful if misused. Read cautions on individual containers carefully. Not to be used by children except under adult supervision. (iii) the outer carton bears on the main panel the caution statement specified in (ii). Substances have a special hazards to health shall have conform labeling requirement as defined by 16 CFR 1500.14(b)(1-5)

All tableware items distributed in the State of California with lead or cadmium intentionally added or which are unintentionally contaminated must be permanently and indelibly marked with the name, or if the item is too small, a registered trademark, of the manufacturer or importer. Food and Nutritional labeling shall be evaluated in accordance with the required size, format, contents, etc. as defined by the regulation . (Labeling evaluation shall be performed. Vendor shall be responsible for the accuracy of information contained)

Additives and colors contained in the ingredients list shall be evaluated in accordance with the approved list of ingredients as defined by the regulation. (Labeling evaluation shall be performed. Vendor shall be responsible for the accuracy of information contained)

Result

NA

NA

NA

NA

·····················*·····································································-··········································


Tel: (86-755) 2602 0111 Fax: (86-755) 2683 7118/9 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Evaluation

• Cosmetic labeling 21 CFR

Lot number

• Safety Agency Listing Verification

Claim verification

• Tracking labels for children's products

Testing Citation/ Method

21 CFR 73/74/ 81/82/

700 /701/740

Visual

Verification procedure

Claim verification

Consumer Product Safety

Improvement Act of2008 I Target

Requirement Document ID:

PT-QA-AII- P-11

Criteria

Toy cosmetics, including temporary tattoos, shall conform to the requirements of the FDCA as codified in 21 CFR 700 through 740 and color additive regulations in 21 CFR 73, 74, 81, and 82. Ingredients, color additives, etc. shall be evaluated in accordance with associated requirements in addition to any required warning labels.

Labeling and ingredient list evaluation shall be performed and rating shall be issued. Vendor shall be responsible for the accuracy of information contained. Cosmetic lot code:

Shall have lot code information provided Verify Client Acceptable Safety Agency Listing by contacting Listing Agency with the sample's Listing Number, Manufacturer, Model Number, and/or Agency Control Number. Shall be verified. Examine the packaging (or submitted artwork) - Report each packaging claim. - Each claim shall be evaluated in accordance with the

cited procedure. A permanent marking on the product and its retail packaging, per Target Tracking Labeling Requirements, containing, at a minimum, the following information:

- Manufacturer Name for D234 items and "Target" for all other items

- DPCI Number - BPM Factory ID Number - Manufacturing Date Code

Verify the content, order, format and font size meet Target Tracking Labeling Requirements. DPCI and BPM Factory ID number on product and packaging must match TRF information. Report markings shown on product.

~ Children's Product

Tracking Label Require Tracking Label Requirements for Target Owned Brand

Result

NA

NA

NA

s

s On packaging:

An kyo

234090058 F16820205 12/11

On product: An kyo

234090058 F16820205 12/11

·································································-····································································


Tel: (86-755) 2602 0111 Fax: (86-755) 2683 711819 Poslcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek



Evaluation

Illinois Lead Warning Label

Real Fur I Faux Fur


Illinois Lead Poisoning

Prevention Act I Target

Requirement

Visual Check/ New York State

General Business Law Section 399-

aaa/ Delaware Title 6

Chapter 25/ New Jersey Tille

56. Chapter 14. (New) Fur

Products §§1-3-C.56:14-1 to 3

I Massachusetts /Wisconsin

Criteria

Product shall not contain any Lead warning label per client's requirement. Refer to the analytical section for details.

'WARNING: CONTAINS LEAD. MAY BE HARMFUL IF EATEN OR CHEWED. MAY GENERATE DUST CONTAINING LEAD."

However, product must comply with the Lead limits as noted in safety requirements in the analytical section. Products containing real and I or faux fur must have a permanent label attached in a conspicuous place containing the following information:

Real Fur: - Fur Type: Real Fur

- The name or names of the animal or animals that produced the fur and species of animals as listed in the Products Name Guide of the Federal Trade Commission's Fur Products Labeling Act

- Fur country of origin - Name and address of the vendor - If fur is dyed, must be disclosed - If fur is made of pieces, must be disclosed

Faux fur: Faux fur must be listed on a "Permanent label" or

"Hana Tao" or "Sticker'' .

Result

NA

NA

•• • • It ••••• * •••• It It •••• It*. It***** It*.* •• *************** •••• *.* •• ** •• It ••••••••••• It. It •• It It. It It* •• It It It ••••••• * •••• It It. It It •• It It. It. It. It It. It... . .. It It It It.


Tel: (86·755) 2602 0111 Fax: (86·755) 2683 7118/9 Postcode: 516067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek



Evaluation

Analytical * BBP I DBP I DEHP content DNOP I DINP I DIDP I DnHP content

*Mercury in batteries


Consumer Product Safety Improvement Act of2008

Target Requirement

California Proposition 65

CPSC-CHC1001-09.3

Various state laws including: VT: Title 10, Chapter 159, Sec. 6621d, Rl: Title 23,

Chapter 23-24.9, CT: Public Act

02-90 NY: Chap 145, Title 21 Ch. 27

2101-2115

Criteria

For all toys: Diisononyl phthalate (DINP), diisodecyl phthalate (DIDP) , di-n- octyl phthalate (DNOP, di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP) or di-n-hexyl phthalate (DnHP): shall not be contained with concentration exceeding 0.1 %.

Actual testing would be conducted on all accessible plastics materials -plasticizer print, scrapable surface coatings, decals, polymeric coated materials (unscrapable), adhesives and sealants (exclude adhesive for stickers), toy nail polish, reusable packaging, electrical plug or cables and inaccessible plastic stealth of electrical wires - and any inaccessible plastic materials that become accessible after completing mechanical hazards testing.

Qualitative testing is allowed as follows: • Phthalates Requirement= 0.1 %or 1000 ppm • Max. = 3 materials • Due to qualitative concentration:

- Must meet 0.0333 % or 333 ppm for 3 materials - Must meet 0.05 % or 500 ppm for 2 materials

It Is acceptable to request up to fifteen (15) total samples or components for testing.

If 15 samples I components does not provide enough sample for testinQ, result is "NeQiiQible." [Target Requirement] If a button cell is found to have intentionally added mercury, such as by testing at over 5 ppm, testing will receive a Fail result.

Mercury battery warnings are not allowed, per Target, on button cell batteries used in children's products. Button Cell Batteries must comply with the mercury limits or not contain any mercury.

Result

s (See test data)

NA

······························11:·························*·············································································

lntertek Testing Services Shenzhen Ltd.-TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen. China

Tel: (86-755) 2602 Ot 11 Fax: (86·755) 2683 7118/9 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek



Evaluation

• Soluble heavy metals

• Extractable lead from crayons, chalk and art materials CPSC • CPSIA Total lead content in substrate material

EFFECTIVE MARCH 01, 2011


ASTM F963-08, Sections

4.3.5.21 8.3

CPSC Guidance Letter


Improvement Act of 20081

EPA3050B (mod) I EPA

3051(mod)l EPA 3052(mod)

Target Requirement

Criteria

Shall not contain compounds of which the metal content of the soluble material exceeds the levels by weight (mg/kg) of the contained solid including pigments, film solids and driers [Antimony (Sb) 60, Arsenic (As) 25, Barium (Ba) 1000, Cadmium (Cd) 75, Chromium (Cr) 60, Lead (Pb) 90, Mercury (Hg) 60, Selenium (Se) 500]

Note: Qualitative (composite) testing is not allowed Specific art materials shall comply with the requirements as defined by the guidelines of the CPSC of no greater than 0.01 % (100ppm) lead.

All accessible substrates on items intended for children up to 14 years of age shall not contain lead in excess of 0.01% (100 ppm) of the weight of the total content.

An accessible substrate material is any material or component of a product that is accessible to a child before and after mechanical hazards testing.

Qualitative testing is allowed as follows: • Lead in Substrate Requirement= 100 ppm • Max. = 3 materials

- For jewelry items, Max. = 2 matierals • Due to qualitative concentration:

- Must meet 33.33 ppm for 3 materials - Must meet 50 ppm for 2 materials


If 15 samples I components do not provide enough sample for testing, result is "Negligible."

Result

NA

NA

s (See test data)

.......................................................................................................................................


Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Poslcode: 516067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation


Hardllnes Test Report

Evaluation

• Illinois Lead Content in Substrate Materials

• Total lead content in surface coating



Prevention Act I

EPA30508 (Mod.)/ EPA 3051 (Mod.) I

EPA 3052 (Mod.) I

Target Requirement


Improvement Act of 2008/

16 CFR 1303/ AOAC

974.02(mod)

Target Requirement

Criteria

All accessible substrate materials of jewelry for children under 12 years of age, and child care articles for children under 6 years of age, in the as received state, shall contain less than 0.004% (40ppm) lead or lead components in which the lead content is the weight of the total content.

As a client requirement, the warning label is not allowed. Qualitative testing is allowed as follows: • Lead in Substrate Requirement = 40 ppm • Max. = 2 materials • Must meet 20 ppm due to qualitative concentration

Report actual results or include data table within report. All accessible surface coatings shall not contain lead in excess of 0.009% (90ppm) of the weight of the total content of paint or surface coating.

Report actual results or include data table within report

Qualitative testing is allowed as follows: • Lead in Surface Coating Requirement = 90 ppm • Max. = 2 materials • Must meet 45 ppm due to qualitative

concentration


Wet Paints are not acceptable. If 15 samples/components do not provide enough surface coating for testing, result is "Negligible" .

Result

NA

s (See test data)

• t * **. * * ** ••••• * •••••• **** •••••••••••• * * *. ** •••••••••••••••••••••••••••••• * •••••••••••••••• * ••• ** •• *.*it* ••••• itt •••• * •••• t *. •••• •• • •

lntertek Testing Services Shenzhen Ltd .-TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: (86-75512602 0111 Fax: (86-755) 2683 7118/9 Poslcode: 518067 Allentlon s drawn to tho terms and conditions printed overleaf.

of 33

lntertek

Target Corporation Hardllnes Test Report


Evaluation

• Illinois Lead Content in Surface Coatings



Prevention Act /AOAC 974.02

(Mod.) ffarget

Requirement

Criteria

All accessible surface coatings of jewelry for children under 12 years of age, child care articles for children under 6 years of age, and toys with paint for children under 12 years of age, in the as received stale, shall contain less than 0.004% (40ppm) lead or lead components in which the lead content is the weight of the total content.

As a client requirement, the warning label is not allowed.

Qualitative testing is allowed as follows: • Lead in Substrate Requirement = 40 ppm • Max. = 2 materials • Must meet 20 ppm due to qualitative

concentration

Report actual results or include data table within report.

It is acceptable to request up to fifteen (15) total samples or components for testing .

Wet Paints are not acceptable. If 15 samples components do not provide enough surface coating fo testinQ, result is "Neqliqible" .

Result

s (See test data)

........................................................................................................................................


Tel: (86·755) 2602 0111 Fax: (86·755) 2663 7116/9 Poslcode: 516067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation




Method CPSIA Total Lead Consumer Applies to all accessible substrates on Jewelry items: NA and Cadmium in Product Safety Shall not contain Lead in excess of 0.01% (100 ppm) of Jewelry Improvement Act the weight of the total content.

of 2008 I CPSC- Qualitative testing is allowed as follows: CH-E1001-08 I ·Lead in Substrate Requirement= 100 ppm

EFFECTIVE CPSC-CH- · Max. = 2 materials MARCH E1002-08 · Must meet 50 ppm due to qualitative concentration 01,2011 modified Shall not contain Cadmium in excess of 0.004% (40 ppm)

of the weight of the total content Qualitative testing is allowed as follows: · Cadmium in Substrate Requirement: < 40 ppm · Max. = 2 materials · Must meet 20 ppm due to qualitative concentration Notes: · Modification =Applying CPSIA Total Lead content method for determining Total Cadmium content · An accessible substrate material is any material or component of a product that is accessible to a child before and after mechanical hazards testing. · Textile Fabric/Threads, Elastics are exempt from this test · It is acceptable to request up to fifteen (15) total samples or components for testing. If 15 samples I components does not provide enough sample for testing, result is "Negligible". · Target Jewelry Definition: Jewelry means 1 )Any of the following ornaments worn by a person: anklet, arm cuff, bracelet, brooch, chain, crown, tiaras, cuff link, hair accessory, earring, necklace, pin, ring, body piercing jewelry, Jewelry placed in the mouth for display or ornament, Jewelry Making Kit, and any products which includes charms 2)Any bead, chain, link, pendant, or other component of an ornament specified in(1 )above; 3) Any ornament specified in (1) above, charm, link or pendant attached to any product, that is intended to be removed · Individual or cluster of beads, sequins, rhinestones, grommets, rivets that are glued, heat sealed, sewn in and intended to be permanently affixed to products are excluded from jewelry definition. Lab will test for Lead in Substrate only instead of both Lead and Cadmium in substrate as those are not considered as Jewelry and apply 100 ppm lead standard. Any ornament specified in (1 )-Jewelry definition above used on products that are intended to be removed (Detachable) will be tested to demonstrate compliance with Jewelry lead and Cadmium requirement.

• . • • ··········-·················································································· ................................... .



of 33

•

lntertek

Target Corporation




Method Mercury in 21 CFR 700.13 Shall not contain more than 0.0065% of mercury for NA cosmetics- cosmetics intended for use with the eyes and 0.0001% documentation of mercury for other cosmetics. In lieu of testing, test review report (together with guarantee letter indicating

genuineness) can be submitted if dated within one (1) vear.

• Mercury in Battery Act Public Alkaline-manganese batteries, alkaline-manganese NA batteries US PL Law 104-142 button cell batteries, zinc-carbon batteries, mercuric-

oxide button cell batteries shall conform to respective requirements.

• Toxicological 16 CFR 1500.3 Products intended for use by children, including toys NA risk assessment and parts of toys, must not be toxic (acute), a skin (TRA)- irritant, eye irritant, corrosive, or a strong sensitizer. Documentation Products that are not intended for use by children must review be labeled appropriately if a toxicological hazard is

present. Toxicity Risk Assessment shall be conducted to substantiate the compliance of the regulation for the following components:

• All toy cosmetics, liquids, pastes, putties, gels and powders regardless of claim

• Other materials bearing a "NON-TOXIC" claim on samples and/or its packaging

In lieu of testing, test report can be submitted if dated within five (5) years. Note: Vendor shall provide a list of Ingredients (not the formulation of ingredients) and shall be responsible for the accuracy of information contained.

* DEHP ASTM F963-08, Pacifiers, rattles, and teethers shall not intentionally NA Section 4.3.8 contain Di (2- ethylhexyl) phthalate. Shall not contain

more than 3% of total solid. Ozone depleting Clean Air Act Self-pressurized containers shall contain no banned NA chemicals- section 602 CFC or HCFC propellant as specified in Clean Air Act document review and 40 CFR Title VI - Stratospheric Ozone Protection.

Part 82 Labeling and ingredient list evaluation shall be performed against the CFC and HCFC banning list. Vendor shall also provide guarantee letter indicating no banned CFC & HCFC was used.

• Nitrosamine in ASTM F963-08, Rubber nipples on pacifiers, when sampled to ASTM NA rubber pacifier Section 4.20.1 I F1313, shall not contain more than 10 parts per billion

ASTM F1313-90 (ppb) of any one nitrosamine per three aliquots of sample nor exceed 20 ppb total nitrosamines.

··························································································································•***********


Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Poslcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Evaluation

*FDA FSSE 21 CFR 175-177

* Extractable Pb & Cd (interior) FDA

* Microbiological content for feather

* Extractable Pb & Cd (lip & rim) SGCD *Total plate count and total colifor m ASTM F963 *GRAS - FDA stainless steel guidelines

••••••••••••••••• * **

Testing Citation/ Criteria Result Method

21 CFR 170-189 Product intended to be used in contact with food shall NA conform to the applicable requirements of the Food, Drug, and Cosmetic Act (FDCA), specifically 21 CFR 170 through 189. All testing will be conducted on the final product.

ASTM F963-08, Toy made of ceramic intended or likely to hold food shall NA Section 4.3.3.2/ conform to the applicable requirements of the FDCA, FDCA section Section 402 (a)(2)(c) and FDA Compliance Policy 402 (a)(2)(c) Guides

FDA Total Plate Count: <5000 cfu/gram NA Bacteriological Total Coliform: <1 MPN/gram

Analytical Manual Fecal Coliform: <1 MPN/gram (Mod.) Salmonella: absence

Shigella: absence

Vendor shall submit documentation which specifies the method of sterilization, the country of origin of the feathers and type of bird the feathers come from. Report this data in results.

(Mod= Expand scope to other products) ASTM C927 -80 Exterior decorations applied within 20 mm of the rim of NA

(2004) cups, mugs, glasses or other vessels shall conform to the applicable requirements as defined by the standards

ASTM F963-08, Pure water used in filling of toys shall meet the NA Section 4.3.6.1 requirements of <= 100 CFU/ml of total plate count and

<= 1 CFU/100ml of total Coliform.

FDA- Generally Shall meet FDA GRAS Guidelines. In lieu of testing, a NA Regarded test report from a third party certified lab can be

as Safe (GRAS) submitted if dated within one (1) year. If acceptable Guidelines documentation is not available testing will be conducted.

***************A***** A*************************** t *******A A At*************************** t ***** ** ******* * *** ****


Tel: (86·755) 2602 0111 Fax: (86·755) 2683 7118/9 Poslcode: 518067 Attention Is drawn to lhe terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Testing Evaluation Citationl Criteria Result

Method * USP <61/62> USP <61> and Report actual. The following products shall be subjected NA Microbial limit test <62> I to

ASTM F963, requirements of ~ 5000 CFU/ml (or ~ 500 CFU/ml for Section 4.3.6.1 cosmetics intended for use with the eyes and baby & 8.4.1 (Scope products) for total viable count (total plate count+ yeast widened to & mold count) and shall not be contaminated with children Salmonella, E. Coli, Pseudomonas Aeruginosa, products)/ CTFA Staphylococcus Aureus, Clostridia, Bile-Tolerant Gram Microbiology Negative Bacteria or Candida Albicans as intended to Guidelines minimize risk associated with lack of cleanliness, shelf

life and contamination. -Cosmetics, liquids, pastes, putties, gels and powders used In toys (Including art materials) - Cosmetics, liquids, pastes, putties, gels and powders used In children products (Including art materials) - Cosmetics No documentation will be accepted. Report review will NOT be accepted.

• Pyrotechnic 16CFR 1507.11 Party poppers (also known as champagne party poppers NA Composition and party surprise poppers) and Christmas crackers

shall contain no more than 0.25 grains (16.2 mg) of pyrotechnic material.

If submitted sample is applicable for this test, rate as "Fail".

• Combustible 16CFR 1500.3 Method of test for flashpoint of potentially volatile NA liquids (c)(6)(iii) I combustible materials (150 •f I 65.6 •C). Ali liquid filled

16CFR items intended or likely to be used by children shall 1500.43(a) comply with this requirement.

Art materials 16 CFR 1500.14 Samples shall meet the requirements intended to NA (LHAMA) (b)(8) I minimize the potential risks associated with the use of documentation ASTM 04236/ art materials that present chronic, long-term heallh review ASTM F963-08, hazards (ASTM 04236/LHAMA). in lieu of testing, test

Section 4.29 report can be submitted If dated within five (5) vears. • Hazardous 16 CFR 1500.231 To identify the presence of potentially hazardous NA liquid GC scan ingredients found during the hazardous liquid screen. All

liquid filled items intended or likely to be used by children shall comJ)Iy with this reguirement.

• Down & feather IDFB 21 /IDFB 7 Real feathers only: NA oxygen number I JIS 6.6/ As Specified

EN 1162 20 maximum **************************************************************************************************************************************


Tel: (8&-755) 2602 0111 Fax: (86·755) 2683 711819 Poslcode: 518067 Allenlion Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation




Method Hazards Sound producing ASTM F963-08, Shall not produce continuous sound with an equivalent NA toys - general Section sound pressure level (LAeq) that exceeds 65 dB. Report (continuous 4.5.1.1/8.19 sound level. sound produced by close to the ear toys) Sound producing ASTM F963-08, Shall not produce continuous sound with an equivalent NA toys - general Section sound pressure level (LAeq) that exceeds 85 dB. Report (continuous 4.5.1.2/8.19 sound level. sound) Sound producing ASTM F963-08, Shall not produce an impact-type peak sound pressure NA toys - general Section level (LCpk) exceeding 95 dB. Report sound level. (impulsive sound 4.5.1.3/8.19 produced by close to ear toys) Sound producing ASTM F963-08, Shall not produce an impact-type peak sound pressure NA toys - general Section level (LCpk) exceeding 115 dB. Report sound level. (impulsive sound) 4.5.1.4 I 8.19 Sound producing ASTM F963-08, Shall not produce an explosive-type peak sound NA toys - explosive- Section pressure level (LCpk) exceeding 125 dB. Report sound type impulsive 4.5.1 .5/ 8.19 level. sound Small objects ASTM F963-08, Toys intended for children under 36 months (3 years) of s

Section 4.6 age shall not include removable, liberated components, /16 CFR 1501 or fragments of toys before or after use and abuse that

are small enough (without being compressed) to fit entirely within the small parts cylinder

Accessible edges ASTM F963-08, Toys intended for children under 8 years of age shall not s Section 4.7 have accessible, potentially hazardous sharp edges

/16 CFR 1500.49 before or after use and abuse testing Projections ASTM F963-08, Toys intended for children under 8 years of age shall not NA

Section 4.8 have accessible, potentially hazardous projections before or after use and abuse testing

Accessible points ASTM F963-08, Toys intended for children under 8 years of age shall not s Section 4.9 have accessible, potentially hazardous sharp points

/16 CFR 1500.48 before or after use and abuse testing Wires and rods ASTM F963-08, Shall not present potentially hazardous accessible sharp NA

Section 4.10 points, sharp edges, or projection hazard before or after use and abuse testing

Nails and ASTM F963-08, Shall not present potentially hazardous accessible sharp NA Fasteners Section 4.11 points, sharp edges, ingestion, or projection hazards

before or after use and abuse testing • • ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ****************************•••• ••••••

lntertek Testing Services Shenzhen Ltd.·TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China


of 33

lntertek




Method Packaging film ASTM F963-08, Shall be at least 0.00150 in (0.0381 0 mm) in nominal NA

Section 4.12 thickness but the actual thickness shall never be less than 0.00125 in (0.03175 mm) as required based on lenQth and perimeter criteria

Folding ASTM F963-08, Shall meet the requirements to eliminate the possible NA mechanisms and Section 4.13 crushing, laceration or pinching hazards that might occur hinges in folding mechanisms in toys designed to support a

child and hinQes in all toys. Cords, straps and ASTM F963-08, Shall be less than 12 in (300 mm) long and not permit NA elastics Section 4.14 the passage of the head probe when tested in

accordance with 8.22. Stability and ASTM F963-08, Samples shall meet the requirements intended to NA over-load Section 4.15 minimize unexpected hazards that can be caused by a requirements toy that can tip easily or is not capable of withstanding

an overload. Confined spaces ASTM F963-08, Samples shall meet the requirements intended to NA

Section 4.16 minimize the possible entrapment of children in toys that form enclosures

Wheels, tires, ASTM F963-08, Shall meet the requirements intended to eliminate the NA and axles Section 4.17 possibility of ingestion, laceration, and puncture hazards

that may be caused by the separation of associated assemblies

Holes ASTM F963-08, Shall meet the requirements intended to eliminate the NA clearances, and Section 4.18 possible hazard that may be caused by changing accessibility of clearances or permanent entrapment and pinching of mechanisms fixed openings Simulated ASTM F963-08, Samples shall meet the requirements intended tc NA protective Section 4.19 minimize the hazards that result if the material from whic~ devices they are constructed fails Projectile toys ASTM F963-08, Samples shall meet the requirements intended tc NA

Section 4.21 minimize certain potential hazards caused by projectile firing toys

leathers and ASTM F963-08, Samples shall meet the dimensional requirements fo NA teething toy Section 4.22/ rattles as specified in 16 CFR 1510

16 CFR 1510 Squeeze toys ASTM F963-08, Samples shall meet the dimensional requirements s

Section 4.24/ for rattles as specified in 16 CF R 1510 16 CFR 1510

Battery-Operated ASTM F963-08, Samples shall meet the requirements intended to NA Toys Section 4.25 minimize the risk or injury associated with battery

modified leakage, overheating, explosion, fire and choking. Shall also include associated instructional literature . .......................................................................................................................................


Tel: (66-755) 2602 0111 Fax: (66·755) 2663 7116/9 Postcode: 51 6067 Attention Is drawn to tho terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Evaluation

Toys intended to be Attached to a crib or playpen

Stuffed and beanbag-type toys Certain toys with spherical ends

Certain toys with spherical ends

Preschool play figures

Balls

Pompoms

Hemisphericshaped objects

Yo Yo elastic tether toys

Magnets

Testing Citation( Method

ASTM F963-08, Section 4.26


ASTM F963-08, Section 4.32.1








Criteria

S~~p!es shall meet the requirements intended to m1n1m1ze the risk or injury associated with entanglement or strangulation hazards that might be caused by toys intended to be attached to a crib or playpen Samples shall meet the applicable requirements associated with this section

Samples shall meet the requirements intended to minimize the potential impaction hazards associated with certain toys incorporating spherical-shape ends intended for children under 18 months. Samples shall meet the requirements intended to minimize the potential impaction hazards associated with certain toys incorporating snail, screw, and bolt shapes and spherical-shape ends intended for children between the ages of 18 months and 48 months. Preschool play figures intended for children under three years of age shall be designed so that their rounded ends are not capable of entering and penetrating to the full depth of the cavity Balls intended for children under 36 months (3 years) of age shall not include removable or liberated components before or after use and abuse that are small enough (without being compressed) to pass entirely through the template for small ball. Samples shall meet the requirements intended to minimize the potential choking hazards associated with pompoms on toys intended for children under 3 years of age Samples shall meet the requirements intended to minimize the potential suffocation risks presented by certain shape that can be placed over a young child's nose and mouth forming an airtight seal for children under 3 years of age. Toys with an end mass greater than 0.02kg (0.041b) shall have cord length less than 50 em (20in) measured when rotatin~:~ at 80 r/min. - Shall not contain a loose as-received hazardous magnet or a loose as- received hazardous magnetic component that have a flux index of 50 of greater and is a small object - Shall not liberate a hazardous magnet or hazardous magnetic component that have a flux index of 50 of greater and is a small object

Result

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

111 ••••• * *. *. ** ••• * * * •• ,. *. * •••••••• * *" •••••• * •• * ••••• * * * ** * •• * * ••• ** ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••


Tel: (86·755) 2602 0111 Fax: (86·755) 2683 71 18/9 Postcode: 518067 Attention Is drawn to tho terms and conditions printed overleaf.

of 33

lntertek


Testing Evaluation Citation/

Method Jaw Entrapment ASTM F963-08, in Section 4.39 Handles and Steering Wheels

Mechanical 16 CFR 1511/ hazards- ASTM F963-08, pacifiers Section 4.20 Mechanical 16 CFR 1500 hazards - dive stick Mechanical 16 CFR 1510 I hazards - rattles ASTM F963-08,

Section 4.23 Lenses - impact 21 CFR resistance 801.410-06 -document review

UL Testing (For electrically operated product)_

UL Standard

Electrically 16 CFR 1505/ Operated Toys ASTM F963-08,

Section 4.4 Transmittance ANSI Z80.3-properties 2010 clause for sunglasses 4.6. 1 to 4.6.3, and 4.6.5, 4.7.3 to evewear 4.7.4 and 4.8


Criteria Result

These requirements are intended to address potential NA jaw entrapment in handles and steering wheels that are accessible for teething in the following categories of toys intended for children under 18 months of age: activity tables intended to be played with by a standing child, large bulky toys, stationary floor toys, push toys intended to be pushed by a child walking upright, and ride-on toys.

The openings in handles and steering wheels shall meet the requirement as specified in section 4.39.3. Samples shall meet the safety requirements as specified NA in 16 CFR 1511 if nipple length longer than 0.63 inch

Samples shall meet the safety requirements as specified NA in 16 CFR 1500

Rattles shall meet the safety requirements as specified NA in 16 CFR 1510

Vendor must provide testing documentation and guarantee letter confirming test compliance to 21 CFR

NA

801.410 for either the uncut finished or finished lenses. Target Requirement: In addition, 30 pairs of uncut-finished or finished lenses need to undergo verification testing. Mark Results as NM Rate as Unsatisfactory if there is any broken lenses (even if the compliance documentation is provided) List the number of broken lenses. Item will be audited to verify compliance with the NA selected sections of the applicable and/or labeled UL standard. Toys operating from nominal 120-V branch circuits shall NA conform to the requirements of 16 CFR 1505

Non-prescription sunglasses and fashion eyewear shall NA comply with the requirements. Sunglasses containing a UVA/UVB protection and Traffic signal recognition claim will be tested to substantiate such claims.

••• . ... .. •• ••••• •• •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••



of 33

lntertek




Method Nonprescription ANSI Z80.3- Shall also comply with other requirements (except NA Sung lass 2010 UVA/UVB protection, Traffic signal recognition which and Fashion have been tested in test "Transmittance properties for Eyewear- sunglasses and eyewear" if claimed. doc review In lieu of testing, test report can be submitted if dated

within one (1) vear. Battery-Powered ASTM F963-08, Samples shall meet the safety requirement as specified NA Ride-on Toys Section 4.25.10 in ASTM F963-08, section 4.25.10 Stuffed toys ASTM F963-08, Shall meet the requirements of the "Tolerances of the NA materials Section 4.3.7 Commonwealth of Pennsylvania Regulation for Stuffed

Toys". It is the vendor's responsibility for conformity of this requirement.

Flammability Flammability of 16 CFR 1500.3 Self-pressurized container shall meet the flammability NA self-pressurized (c)(6)(viii) /16 requirements of 16 CFR 1500.3 (c)(6)(viii). containers CFR 1500.45 Flammability of 16 CFR 1610 All plain surface fabrics weighing 3.0 oz/yd' or less will NA clothing textiles (Mod.) be tested for flammability.

All raised surface fabrics regardless of fiber content and weight will be tested for flammability. All over embroidery fabrics will be tested regardless of fabric weight.

Plain surface textiles, regardless of weight, made entirely from any of the following fibers or entirely from combination of the following fibers: ACRYLIC, MODACRYLIC, NYLON, OLEFIN, POLYESTER, WOOL and coated (e.g. 100% Polyester coated with PU) will not be tested.

Target requires testing of 1 color way only for garments, trims and findings, feathers, fur, and faux fur, as applicable.

Results for trims, findings and feathers (where applicable) will report as "Data Only". (Note: Do not test narrow fabrics, trims and loose fibrous materials manufactured less than 50 mm (2 inches) in width and/or less than 150 mm (6 inches) in length.)

(Mod "' TarQet requirement) Flammability of 16 CFR 1611 Vinyl Plastic Film used in toys should comply with 16 NA vinyl plastic film CFR 1611 as applicable Flammability of 16 CFR 1500.44 Shall not exceed the maximum allowable limit of no s solids Qreater than 0.1 inches per second ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

lntertek Testing Services Shenzhen Ltd.-TFH Division 7/F., ShekouTechnology Main Building, lnduslrial7lh Road,Shekou,Shenzhen, China

Tel: (66·755) 2602 0111 Fax: (66-755) 2683 7118/9 Poslcode: 516067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation


Hardllnes Test Report


Method Workmanship Defects Visual Should display good workmanship with no major

defects s

Performance Actual use- Actual use Shall function as intended as received. Report details of s functionality - not evaluation (features tested I methods used I materials covered by other used I etc.). Report any features not evaluated. tests Effects of Temperature 24 hours @ 0 o F and 120 o F - no failure or visual s extreme change change temperature chanoe Liquid Filled EN 71 Part 1-2005 Shall be no leakage, splitting or cracking when test to NA Items Clause 5.5 EN 71 Part 1 Clause 8.15. (Permanently Sealed) Liquid Filled lntertek Shall remain Intact and no liquid shall be released when NA Items In-House Method a downward force of 591bs (the 95th percentile weight of (Permanently a 6 year old) is applied to the liquid filled item with a Sealed) specified foot template. Resistance to ASTM 8117-07 Shall withstand 24 hours In 1% salt spray (fog) with no NA corrosion- modified major corrosion or visual change. Modification = 1% Salt accessible metal (Fog) Spray. components in water-play or outdoor toy - 24 hours Moisture content Moisture Shall not exceed 6%- 12%, report actual value NA -wood and wood verification composite Colorfastness • Colorfastness to AATCC 107 [Outdoor Products) NA water

Class 4.0 (Min.) • Colorfastness to AATCC 15-07 [Fabric headwear- hats, masks, etc.) NA perspiration

Class 3.0 (Min.) • Colorfastness to AATCC 16 [ONLY applicable to all outdoor fabric items) NA light [Option 3 20FU)

Class 4.0 minimum ************* •• * ** * * ** * ** ** **** *** * * •• * •• **** *************** * • • •• * ** ••••••••••••• ••••••• *******"***************•*******'*************

lntertek Testing Services Shenzhen ltd.-TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Poslcode: 518067 Allenllon Is drawn to the terms and condlllons prlnled overleaf.

of 33

lntertek

Target Corporation



Test Items

PACKAGING/LABELING REQUIREMENTS TRGT-9067-US V8 Date: Sep 01 . 2011

Testing Citation/ 1 Method

RequiremenULimit 1 Result

ADDITIONAL INFORMATION Principal display The Principal Display Panel (PDP) shall be defined by location and area per the following: panel - PDP PDP Location = the side of the packaging that is displayed to the guest when shelved.

Hangtags PDP shall be defined as the side where both Product Name I Description and Net Quantity/Count appear. PDP Area = the total area where printed material exists on the PDP location. For example, the PDP of a Iaroe boxed TV would be iustthe size of the sticker on the box.

Open stock Open stock is defined as items that are unenclosed in packaging, where guest can fully view and touch product including the product's full dimensions and all required Target labeling per this protocol.

Mock-up If vendor is using packaging designed by Target and it is not complete at time of testing, mock-packaging up packaging will be accepted. If mock-up packaging is submitted, it must be clearly legible

and must include all regulatory requirements stated in this protocol. Handwritten mockup packaging is NOT acceptable. Warnings or other regulated labeling must appear in their proper location on mock up packaging. If these regulated warnings and labeling have sizing requirements, a separate "to scale" copy of these warnings and labeling can be submitted at the same time as the not-to-scale mock up packaoino.

Scope This Protocol Contains Packaging And Labeling Requirements. (Target Dept 55 And 219 Are Excluded From Trgl-9067). Target.Com Packaging/Labeling Should Only Be Tested To The Carb And Plastic Bao Warnino Test Lines.)

LABELING Product Name or Target Guidelines/ Product Name I Description shall be shown on PDP s Description FPLA or UPLR including open stock.

Declaration of Target Guidelines/ Report Declaration of Responsibility, Distribution s Responsibility, 19 CFR 134 Statement and COO. Shall be shown on package Distribution or hangtag. Statement, Country of Origin -package or hangtag

Declaration of Target Guidelines/ If Sewn-in tags are required, it shall include COO NA Responsibility, 19 CFR 134 and the Registered Identification Number (RN). If Distribution Distributed by Target, shall use Target RN per the Statement, following: RN17730 OR list the following statement Country of Origin - instead of an RN: Distributed by Target sewn-in tag/label Corporation, Minneapolis, MN 55403.

If Sewn-in tag is not required, but COO statement is present, rate as data . Client reauirement

* ••• * *** •••••••••••• *** ********* ******* ** ***. ** ** * * •••••• • •• * •••••• *... ...... ... .. ... . . ****:A.**** ******************* ******** ******


Tel: (86·755) 2602 0111 Fax: (86·755) 2683 7118/9 Postcodo: 518087 Attention Is drawn to tho terms and condillons printed overleaf.

of 33

lntertek

Target Corporation



Test Items Testing Citation/ Requirement/Limit Result Method Net Quantity Target Guidelines/ Net quantity shall be present on the package in NA

FPLAor UPLR terms of weight or mass, distance or length, capacity or volume, area, piece count or a combination of these units of measurement. Verify the presence or absence and accuracy of the net quantity. Note: Items using protocol 8266 must have piece count listed, otherwise fail. Do not verify labeled dimensions. Open Stock (defined above) is exempted from this requirement. Vendor note: Net Quantity I Count shall be expressed in terms that will be most descriptive to user's end-use. Target merchant will determine if the vendor should use count or dimensions. Example: Garden Hose = 25ft (7.6 m), Pencil = 10 pencils or 10 count, Beverage Drinking Glass = 32 fl oz (946 ml), Glassware Set = 4 - 32 fl oz (946 ml) glasses.

For Items Using Protocol 8266: Do Not Verify Labeled Dimensions. Must Have Piece Count Listed Otherwise Fail.

Net Quantity Visual Report claimed net quantity verbatim. C: 1 piece; R: 1 piece

Net Quantity Visual Net Quantity I Count weights & measurements shall NA Format be represented in both English units and metric

units. Metric units shall be placed immediately to the right of English units or on next line below. Metric units shall be enclosed within parentheses or brackets.

Vendor Note The absence of the metric units in parentheses or brackets will result in a failure. Example: 4 in x 4 in (10 em x 10 em) OR 18 in H x 12 in W x 4 in D (45.7 em x 30.4 em x 10.1 em)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

lntertek Testing Services Shenzhen Ltd.-TFH Division 7/F., ShekouTechnology Main Building, lnduslrial 71h Road,Shekou,Shenzhen, China

Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek



Test Items Testing Citation/ Requirement/Limit Result Method Net Quantity Visual Net quantity shall not use periods in abbreviations and NA Format shall not use symbols for units (such as ' ,#, or the like)

This does not apply to weights & measurements used in the Product Name I Description, descriptive copy, or charts and tables. Vendor Note-Product Name I Description, descriptive copy, or charts and tables do not replace requirement for Net Quantity I Count. Net Quantity I Count weights & measurements shall NA follow "Rule of 1 to 1000." Use units that, when converted, result in numerical values between 1 and 1000. Example: 48 in= 121.9 em NOT 48 in= 1219 mm, 5 in= 12.7 em NOT 5 in= .127m

CA Formaldehyde Title 17, CA Code A label review is only required if composite wood is NA Product!Packagin of Regulations, present in the sample (stated by the Sample g Labeling Section Declaration Form) (Applicable to 93120.7(d) ~ wood and Fabricator Label wooden Requirements CARB 5arrple products only) Declaration Formdoc

Vendor must provide a completed and approved Sample Declaration Form if wood is present in the product. Sections A, 8, and 0 must always be completed. If Vendor selects 8 .3: -Section C must be completed -Acceptable labeling must be present on the product packaging or if an open stock item, the label is to be on the product. -If the labeling is on the product packaging it can be printed, stamped, or stickered and is to be in English. -If a label is present on the product, it shall consist of a stamp, tag, or sticker and be in English. A bar code cannot replace the label information. -The labeling shall include: Name of fabricator or responsible party. (Target Distribution Statement satisfies this requirements.) Date of production for the finished good. (Month and Year, mmlyy) Compliance Statement, "California 93120 Compliant for Formaldehyde"

For finished goods, if label in NOT present, vendor shall indicate if the raw material was manufactured before September 30, 2009 for HWPW-CC (selection of 8.2 on Form)

·······················································································••*********************************************



of 33

lntertek



Test Items Testing Citation/ Requirement/Limit Result Method CA Formaldehyde Title 17, CA Code A copy of the certificate of conformance from the mill NA - Mill's Certificate of Regulations, for the board or panels purchased to fabricate the of Conformance Section 93120.7(d) test items is to be submitted to the lab and reviewed. (Applicable to Fabricator Label wood and Requirements Verify the certificate of conformance is from the wooden CARB approved lab and is for the same type of products onlv) materials identified in the Sample Declaration Form. CA Formaldehyde Title 17, CA Code A copy of the mill's CARB Approved Certification NA -Mill's CARB of Regulations, from which the boards or panels where purchased is Certification Section 93120.7(d) to be submitted to the lab for review. (Applicable to Fabricator Label wood and Requirements Verify the identified mill is listed on the CARS's listing wooden of approved mills. products only) Plastic Bag CA Code 22200- Applies to all plastic bags, excluding : NA

22202 - Items tested to 8000(toy protocol) Rl Code 11-9-16 - Plastic bags for food products weighing less

MA I ASTM F963- than 51bs 08, Section 8.21

Plastic bags with a thickness of less than 1 mil, in Target's which a diameter is 5 inches or greater (when formed

Requirements into a circle) used as packaging or packaging article for domestic/household use (e.g. laundry bag, garbage bag) shall contain a warning statement similar to below on the bag in English:

"WARNING: To Avoid Danger of Suffocation, Keep This Bag Away From Babies and Children. Do Not Use This Bag in Cribs, Beds, Carriages, or Playpens"

Type size for the warning is as follows: Total Length and Width of Size of Print Bag 60 inches or more At least 24

points 40 inches to less than 60 At least 18 inches points

25 inches to less than 40 At least 14 inches points

Less than 25 inches Atleast 10 points

The warning must be repeated at 20 in intervals on bags whose length plus width is more than 40 inches . ........... ,. ......................................................................................................................... .

lntertek Testing Services Shenzhen Ltd.·TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: (86·755) 2602 0111 Fax: (86·755) 2683 7118/9 Postcodo: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



Test Items Testing Citation/ Requirement/Limit Method Plastic Bag with CA 22203 If a plastic bag has: Cartoon pictures 1. Average gauge thinner than .001 inch, and or 2. An opening of a 5 inch diameter or a capacity of characters greater than 125 cubic inches

Then the bag is prohibited from having cartoons, pictures, or caricatures which encourage use of the bag as a toy by children under 12 years of age.

Lot Code Visual Report Lot Code on product if listed on TRF. Rate as data.

HOUSEHOLD CHEMICALS • CA PRO 65 (TRGT- 6572 - US) (REVISION 12 DATED 18 February, 2011)

Item Products Case Requirement Labeling

1 Toys: designed for BG-350969 Phthalate: (each DEHP, BBP, No warning was or reasonable used RG-356892 DBP, DIDP and DnHP) provided. by children under :50.1% (1000ppm) six years of age.

Lead: Each Accessible Surface Coating

:50.009% (90ppm)

Each accessible PVC substrate s0.02% (200ppm)

Each accessible substrate :50.03% (300ppm)

Abbreviation : S =Satisfactory; NA =Not Applicable; NR =Not Requested by the Applicant

Result

NA

NA

Result

s (See test

data)

s (See test

data)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••



of 33

lntertek



Test Data:

Total Lead (Pbl Content in Surface Coating

With reference to ASTM E 1613-04 I E 1645-01, acid digestion method was used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.

Tested Component (1)

ppm = parts per million < =Less than

Result (ppm) <10

Tested Component: See component list in the last section of this report

2 Total Lead (Pb) Content in Non-Surface Coating Materials (Substrate)

Limit (ppm) 90

With reference to U.S. Consumer Product Safety Improvement Act 2008, Title I, Section 101 for children's products containing Lead, acid digestion method was used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.

Tested Component (2/3/4) (5/6/7)

ppm = parts per million < =Less than

Result (ppm) <10 <10

Tested Components: See component list in the last section of this report

3 Total Lead (Pb) Content

Limit (ppm) 100 100

With reference to Illinois Lead Poisoning Prevention Act 410 ILCS 45 • acid digestion method was used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.


<=Less than

Result(%) <0.001

Tested Component: See component list in the last section of this report

Limit(%) 0.004

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••


Tel: (86-755) 2602 0111 Fax: (86·755) 2683 7118/9 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



4 Total Lead Content (for Toys)

Acid digestion method was used and total Lead content was determined by Inductively Coupled Argon Plasma Spectrometry.


(2/3/4) (5/6/7)

Result(%) <0.001 <0.001 <0.001

Limit(%) 0.009 0.02 0.02

The above limit was quoted from the Consent Judgement No. BG-350969 & RG-356892 settled by superior court of the State of California for the county of Alameda, for toys based on the California Proposition 65.

< ; Less than

Tested components: See component list in the last section of this report

5 Phthalate Content

With reference to CPSC-CH-C1001-09.3, determined by Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Dibutyl phthalate (DBP) Diethyl hexyl phthalate (DEHP) Benzyl butyl phthalate (BBP) Di-iso-nonyl phthalate (DINP) Di-n-octyl phthalate (DnOP) Di-iso-decyl phthalate (DIDP) Di-n-hexyl phthalate (DnHP)

<;Less than

ill Negligible# Negligible# Negligible# Negligible# Negligible# Negligible# Negligible#

Result(%) (2/3/4) <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01

(5/6/7) <0.01 <0.01 <0.01 <0.01 <0.01 <0.01 <0.01

Limit(%)

0.1 0.1 0.1 0.1 0.1 0.1 0.1

Remark:#; As per Target protocol, phthalate content was not conducted on the listed component of submitted samples because sufficient sample weight cannot be obtained from 15 sets of submitted samples.

Tested Components: See component list in the last section of this report *""******************************************"'***************************************************************************************

lntertek Testing Services Shenzhen Lld.-TFH Division 7/F., ShekouTechnology Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: (86-755) 2602 0111 Fax: {86-755) 2663 711819 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

of 33

lntertek

Target Corporation



6 Phthalate Content

By solvent extraction and Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Result (0.1>) Limit (O.J,) ill (2/3/4) (5/617)

Dibutyl phthalate (DBP) Negligible# <0.01 <0.01 0.1 Di-(2-ethyl hexyl) phthalate (DEHP) Negligible# <0.01 <0.01 0.1 Benzyl butyl phthalate (BBP) Negligible# <0.01 <0.01 0.1 Di-iso-decyl phthalate (DIDP) Negligible# <0.01 <0.01 0.1 Di-n-hexyl phthalate (DnHP) Negligible# <0.01 <0.01 0.1

The above limit was quoted from the Consent Judgement no. BG-350969 settled by superior court of the state of California for the county of Alameda, for toys (designed for or reasonable used by children under six years of age) based on the California Proposition 65.

< =Less than

Remark:#= As per Target protocol, phthalate content was not conducted on the listed component of submitted samples because sufficient sample weight cannot be obtained from 15 sets of submitted samples.

Tested Components: See component list in the last section of this report

*******"'********••···········································································•************************************** Component list:

(1) Coatings (white, black) on plastic (eyes of all styles). (2) Transparent orange plastic (orange style). (3) Transparent blue plastic (blue style). (4) Transparent purple plastic (purple style). (5) Transparent green plastic (green style). (6) Transparent pink plastic (pink style). (7) Transparent yellow plastic (yellow style).

*lr*********U'*************************************************************1t1t*********ll*********•*l<"'lt1titll-1t"'****"*****;U•It1t**************

lntertek Testing Services Shenzhen Ltd.-TFH Division 7/F., ShekouTechno!ogy Main Building, Industrial 7th Road,Shekou,Shenzhen, China

Tel: {86-755) 2602 0111 Fax: (86·755) 2683 7118!9 Postcode: 518067 Attention Is drawn to the terms and conditions printed overleaf.

End of report

of 33

lntertek - regent products 16 cfr 1500 california tableware safety programs - ceramic or pewter or...

Documents