livestock handling & farm products range - … handling & farm products range 2016 catalogue...

11300 306 204metalcorp.com.au 1300 306 204

Your rural steel expert!

Livestock handling & farm products range

2016 CATALOGUE - NSW EDITION

2 www.metalcorp.com.au

31300 306 204

Metalcorp supplies a wide range of quality rural farm products such as fencing and stock handling equipment.

We also supply a range of steel for building and fabrication. Metalcorp know how important it is to go

the extra mile to support our customers – both farming and commercial – in regional Australia. We listen

carefully to our customer’s feedback to improve the service we deliver.

LIVESTOCK HANDLING & FARM PRODUCTS RANGE

2016 CATALOGUE


BULLOCKMASTER® Crush

CATTLEMASTER® Crush

Features:• Easy to use parallel squeeze holds animals secure and

minimize movement• Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate

Features:• Easy to use single sided parallel squeeze holds animals

secure and minimises movement• Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate

Features:• Easy to use diagonal side squeeze, to assist with

immobilisation of cattle • Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate• Split gates on both sides for maximum access

CLASSIC PLUS® CrushTop of the range heavy duty crush with full vet facilities. Designed to completely immobilise cattle quickly and efficiently, with a double sided parallel squeeze keeping safety top of mind.

Top of the range heavy duty crush with full vet facilities. Designed to completely immobilise cattle quickly and efficiently, with a single sided parallel squeeze keeping safety top of mind.

The CATTLEMASTER® is one of our most popular crushes, a genuine all-rounder with heavy duty construction.

DIMENSIONS: 3437mm (L) x 1310mm (W) x 2370mm (H) INTERNAL: 750mm WEIGHT: 712kg PRODUCT NUMBER: 143333



CATTLE CRUSH RANGE

51300 306 204

FARMHAND® Headbail

Features:• Easy to use diagonal side squeeze to assist with

immobilisation of cattle • Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate

Features:• Infinite lock on headbail, locks in any position• Drop-away operating handle • Simple to operate and release chin bar with infinite adjustment • Available in near side and off side • Triple protection, enamel coating, super etch undercoat, galvanised

construction

FARMHAND® CrushThe FARMHAND® is an excellent heavy duty crush that is suited for most applications. This crush is designed for producers who do not need to engage in complicated vet practices.

The FARMHAND® Headbail is our most popular heavy duty headbail. Offering the same strength, quality and security as our top-of-the-range crushes.

DIMENSIONS: 2550mm (L) x 1370mm (W) x 2350mm (H) WEIGHT: 400kg PRODUCT NUMBER: 150715

DIMENSIONS: 1310mm (W) x 2370mm (H) WEIGHT: 250kg PRODUCT NUMBER: 155760

METALCORP CATTLE CRUSH OPTIONAL EXTRAS

Optional features:• Rear operation kit available

OR

ROOF KITBAULK GATE GALVANISED FLOORCHIN SCOOP

PRODUCT NUMBER: 172396




CATTLE CRUSH RANGE


With Metalcorp’s nation wide footprint we can arrange delivery of all your farm needs no matter where you might be.

HOBBYMASTER® Crush

HOBBYMASTER® Headbail We can arrange delivery

Features:• Infinite lock on headbail, locks in any position• Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Drop-away handles can be operated independently from front or back

while other handle remains safely disengaged • Simple to operate and release chin bar with infinite adjustment • Split gates on both sides for maximum access

Features:• Infinite lock on headbail, locks in any position• Internal vet access gate in rear slide gate• Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Drop-away handles can be operated independently from front or back while other

handle remains safely disengaged • Simple to operate and release chin bar with infinite adjustment • Split gates on both sides for maximum access

Features:• Infinite lock on headbail, locks in

any position• Drop-away operating handle • Available in near side and off side • Manufactured from high quality,

Australian made galvanised steel

HOBBYMASTER® Vet CrushThe HOBBYMASTER® Vet is our leading economy Vet crush, loaded with key features to suit all veterinarian requirements.

The HOBBYMASTER® is our most popular economy crush, loaded with key features without compromising on strength or durability.

The HOBBYMASTER® Headbail is our leading economy headbail. Suitable for general purpose cattle restraint.



DIMENSIONS: 1310mm (W) x 2288mm (H) WEIGHT: 120kg PRODUCT NUMBER: 194826

cattle crush RANGE

OR

71300 306 204

STOCKSAFE® Force Range

CATTLE KING® Rotary Force

CATTLEMASTER® safety force

Features:• 360o dual sheeted gates• Fully enclosed• Safety lock forcing gates• Quiet operation• Nylon sleeved hinged system• Greased nipples• Manufactured from Australian made galvanised steel • Easy to erect• Can be added to any existing yard system

Features:• 3m radius• Sheeted for safety• Easy to erect• Anti-backing locking mechanism on gate

for operator safety

The Metalcorp CATTLE KING® rotary force is designed for the safe and effective flow of cattle in the lead up to the race, reducing stress on livestock by separating operator and beast. The 360 degree dual gates offer continuous flow.

The CATTLEMASTER® Safety Force is suitable for any sized cattle operation, designed with operator and animal safety in mind. It assists with the easy flow of cattle into your race or loading facility, making a stress free working area while reducing bruising with fully sheeted sides.




CATTLE KING® LOADING RAMPS

Features:• Heavy duty construction, manufactured

from 115mm x 42mm non-bruise oval rail • Non slip walkway with safety rail and

access ladder standard• Hardwood timber floor• Manway Gate at top of ramp for easy

access to race and truck access• Overhead bracing for additional strength• Levelled loading platform at top of ramp

CATTLE KING® 5.2 metre Deluxe Cattle RampOur top of the line heavy duty ramp, designed with continuous flow and high volume loading and unloading of cattle in mind.


CATTLE KING® 3.6 metre Load Ramp with walkway

Features:• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail • Non slip walkway with safety rail • High tensile pressed metal galvanised sides, adding strength and reducing noise• Hardwood timber floor• Overhead bracing for additional strength

Optional Features:• Walkway can be provided on either side OR both sides upon request

Heavy duty 3.6metre ramp, designed with safety in mind for both operator and beast. Our most popular model, suited for all applications.

PRODUCT NUMBER: 202373DIMENSIONS: 3600mm (L) x 1705mm (W) x 3135mm (H) WEIGHT: 495kg

CATTLE KING® 3.6 metre adjustable Ramp with walkway

Features:• Contains Metalcorp’s unique spring assisted adjustment system • One hand adjustment operation, with dual pin locking system• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail• Hardwood timber floor• Overhead bracing for additional strength

Optional Features:• Walkway can be provided on either side

Heavy duty adjustable 3.6metre ramp with walkway, designed with safety in mind for both operator and beast, featuring Metalcorp’s unique spring assisted adjustment system.

PRODUCT NUMBER: 212421DIMENSIONS: 3600mm (L) x 1800mm (W) x 3300mm (H) WEIGHT: 652kg

Optional Features• Walkway can be

provided on either side OR both upon request

• Can have fully sheeted sides

91300 306 204

CATTLE KING® LOADING RAMPS

Features:• Fully portable loading solution • Simple to erect in minutes• 5 individual components make up this ramp• Easily constructed by two people in a matter of minutes• Sheeted galvanised sides for added strength, noise reduction and stock and operator safety• Hardwood timber floor

PREMIER® 3 metre Knock-down Load RampThe PREMIER® 3 metre knock-down load ramp offers heavy duty construction, while still offering a portable solution. DIMENSIONS: 3000mm (L) x 1800mm (W) x 3140mm (H) WEIGHT: 388kg PRODUCT NUMBER: 194830

Features:• Includes Metalcorp’s unique spring assisted adjustment system • One hand adjustment operation, with dual pin locking system• Heavy duty construction, manufactured from 115mm x 42mm non-

bruise oval rail • High tensile pressed metal galvanised sides, adding strength and

reducing noise• Hardwood timber floor• Overhead bracing for additional strength

CATTLE KING® 3.6 metre Adjustable Load Ramp Heavy duty adjustable 3.6m ramp, designed with safety in mind for both operator and beast, featuring Metalcorp’s unique spring assisted adjustment system.

DIMENSIONS: 3600mm (L) x 1800mm (W) x 3300 (H) WEIGHT: 425kg PRODUCT NUMBER: 202414

CATTLE KING® 3.6 metre Load Ramp

Features:• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail • High tensile pressed metal galvanised sides, adding strength and reducing noise• Hardwood timber floor• Overhead bracing for additional strength

Heavy duty 3.6m ramp, designed with safety in mind for both operator and beast. Our most popular fixed height model, suited for all applications.



CATTLE KING® Range

CATTLE KING® Yard Equipment

Features:• Rails: 115 x 42mm Cattle Rail | Legs: 50 x 50mm SHS• Steel cap top and bottom• 5 rail system, great visual deterrent - 575mm • Reduced bruising factor while handling cattle• Panels available in 3.1m, 2.5m, 2.25m• Height of top rail is 1.8m

The CATTLE KING® yard equipment range is Metalcorp’s top of the line, heavy duty stock handling solution, suitable for all heavy and intense cattle handling requirements. When only the best will do, CATTLE KING® delivers safe and secure systems.

PRODUCT NUMBER: 192315 PRODUCT NUMBER: 202815

CATTLE KING® Panels available in 3.1m, 2.5m, 2.25m lengths

CATTLE KING® Slide Gate

CATTLE KING® Manway Gate

CATTLE KING® Race Bow

CATTLE KING® 2.5m Gate-In-Frame

CATTLE KING® 5m Double Gate-In-Frame

PRODUCT NUMBER: 188546 PRODUCT NUMBER: 203570 PRODUCT NUMBER: 200903

111300 306 204

CATTLE KING® Range


CATTLE KING® Manway Panel available in 2.5m & 3.1m lengths

CATTLE KING® 7 Bar Panels Available in 2.5m & 3.1m

All products are available in hot dipped galvanised on request

CATTLE KING® Blind Panel available in 2.25m & 2.5m lengths

CATTLE KING® Force Bow Available in 2.5m

CATTLE KING® 6 Bar Panels Available in 2.25m & 2.5m


CattleMASTER® LOADING RaMPS

Features:• Galvanised 75x40mm rail construction• Hardwood timber floor • Overhead bracing for strength

CATTLEMASTER® 3 METRE CATTLE RAMPThis 3m loading ramp is our entry level to the CATTLEMASTER® loading ramp range.

Features:• Non slip walkway with safety handrail• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor • Overhead bracing for strength

CATTLEmaster® 3 metre adjustable cattle ramp with walkwayThe CATTLEMASTER® adjustable loading ramp with walkway has all the key features you need in a load ramp.This quality Australian made loading ramp is made with safety of both user and stock in mind.


CATTLEmaster® 3 metre adjustable cattle ramp

Features:• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor• Easy to relocate• Overhead bracing for strength

The CATTLEMASTER® 3 meter adjustable cattle ramp is a great ramp for loading and unloading various height vehicles.

Features:• Non slip Walkway with safety handrail• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor• Overhead bracing for strength

CATTLEmaster® 3 metre Cattle Ramp with WalkwayThis is one of our most common load ramps, it comes with a non slip walkway and hand rail, this great all-rounder is just what your farm needs.




131300 306 204

CattleMASTER® RANGE


CATTLEMASTER® Panels vailable in 2.25m & 2.5m lengths

CATTLEMASTER® Slide Gate

CATTLEMASTER® Manway Panel

CATTLEMASTER® Race Bow

CATTLEMASTER® 2.5m Gate-In-Frame

CATTLEMASTER® 5m Double Gate-In-Frame

CATTLEMASTER® Yard Equipment

Features:• Rails: 75x40mm oval rail Legs: 50x50mm SHS• Steel capped top and bottom• 6 rail system = 450mm of visual rail• Height of the top rail is 1.8m• Interchangeable with the other Metalcorp ranges

CATTLEMASTER® yard equipment is the newest line to the Metalcorp range. This quality Australian made product is designed to be an all-round system that meets all your farm stock handling needs. Great value without compromising quality or strength.



Stockmaster® loading ramps

Features:• Galvanised pipe construction• Hardwood timber floor• Lightweight for easy relocating

STOCKMASTER® 3 METRE CATTLE RAMPThe STOCKMASTER® Loading Ramp is a practical, light weight loading ramp, suitable for the hobby farmer or as a transportable option to load & unload at your adjustment height.DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140mm (H) WEIGHT: 290kg PRODUCT NUMBER: 183868

Features:• Walkway with safety handrail• Chain adjustment to suit various loading & unloading heights• Galvanised pipe construction• Hardwood timber floor

Stockmaster® 3 metre adjustablecattle ramp with walkwayThe STOCKMASTER® Adjustable Loading Ramp provides a cheaper alternative to the end user without compromising quality. Excellent entry level ramp with a wide range of features.


stockmaster® 3 metre adjustable cattle ramp

Features:• Chain adjustment for various loading & unloading heights• Galvanised pipe construction• Hardwood timber floor• Lightweight for easy relocating

The STOCKMASTER® Adjustable Cattle Loading Ramp is great for loading various height vehicles.


Features:• Walkway with safety handrail• Galvanised pipe construction• Hardwood timber floor

STOCKMASTER® 3 metre Cattle Ramp with WalkwayThe STOCKMASTER® Loading Ramp is a practical, lightweight loading ramp, suitable for the hobby farmer or as a transportable option to load & unload at your adjustment height.DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140mm (H) WEIGHT: 550kg PRODUCT NUMBER: 215252

151300 306 204


STOCKMASTER®Race Bow


STOCKMASTER®Manway Panel 2.5m

STOCKMASTER®Manway Gate

STOCKMASTER® Slide Gate

STOCKMASTER® Yard EquipmentThe Metalcorp STOCKMASTER® yard range is made to suit entry level cattle handling. Manufactured form 32nb galvanised pipe.


STOCKMASTER® Panels 2.25m & 2.5m

STOCKMASTER® Gate-in-Frame 2.5m

STOCKMASTER® 5m Double Gate in Frame

Stockmaster® RANGE


TRANSPORTABLE STOCK HANDLING EQUIPMENT

Transportable Loading Ramp 3.7m Long

Heavy Duty Transportable Sheep Race With 3 Way Draft



METALCORP RANGE

Features:• 4.7m diameter• 7 Way Draft Facility• Overhead controls with platform• Heavy duty construction• Portable or fixed options available• Drafting way options variable

CATTLE KING® Drafting Pound

CATTLE KING® 3 Way Race Draft



Features:• 3 Way Drafting Module• Suitable for either in front of crush

or in race• Fixed unit• Gates only move one direction

(inwards) for ease of drafting• Controlled on operating side using

Stainless Steel manual cable system• Manufactured from Australian made

galvanised steel

Features:• Can transport a whole yard

– panels stack on the side • Removable draw bar• H/D solid axle

Features:• Can transport a whole yard

– panels stack on the side • No Wheels to remove• Draw Bar just folds up out

of the way

3 Way Draft With Working Gates

171300 306 204

CATTLE YARD DESIGNS

Suitable for the CATTLE KING® and CATTLEMASTER® ranges

20 HEAD WORKING (40 HEAD HOLDING)

Optional Cattle Crush

Optional Load Ramp

7.2m Ra

dius

12.5m

8.6m

2.252.25

2.25

2.25

20 C 55 HEAD WORKING (70 HEAD HOLDING)55 S

15m

10m Optional Cattle CrushOptional Cattle Crush Optional Cattle CrushOptional Load Ramp

85 HEAD WORKING (125 HEAD HOLDING)85 C

17.5m

15.4

m

10.9m Radius

2.5m Radius

10.2m Radius

7.2m Ra

dius

2.25

2.25 2.252.25

2.25Optional Cattle Crush

Optional Cattle Crush

Optional Load Ramp

Optional Calf Race

125 HEAD WORKING (210 HEAD HOLDING)125 S

24m

14.6

m

Optional Cattle Crush Optional Load Ramp

165 HEAD WORKING (280 HEAD HOLDING)

26.5m

9.8m Radius

7.2m Radius

2.252.25

2.25

17.3

m

165 C

Optional Cattle CrushOptional Cattle Crush

Optional Load Ramp

Optional Cattle Race


SHEEPKING® 3m Adjustable Loading Ramp wITH WalkwaySHEEPKING® 3 metre adjustable load ramp, solid construction with walkway. Suitable for all on-farm stock loading.

Features:• Adjustment feature allows loading from semi-trailer down to box trailer• Metalcorp’s lockable chain adjustment system • Solid construction, manufactured from galvanised oval rail• Non-slip walkway with safety rail • Sheeted galvanised W-strap sides, for added strength, noise reduction and stock and operator safety• Hardwood timber floor• Overhead bracing for additional strength


SHEEPKING® 3m Adjustable Loading Ramp3 metre adjustable load ramp, solid construction. Suitable for all on-farm stock loading.

Features:• Solid construction, manufactured from galvanised oval rail• Metalcorp’s lockable chain adjustment system • Sheeted galvanised W-strap sides, for added strength, noise reduction

and stock and operator safety• Hardwood timber floor• Overhead bracing for additional strength


SHEEPKING® 3 PART LOADING RAMPPRODUCT NUMBER: 207780

Features:• 2.4 m long• V shaped in construction• Light weight and transportable• Fully galvanised oval rail construction

SHEEPKING® V-Race

Features:• 3.2m long • V shaped sheeted sides• 3-Way draft • Gate stops to allow quick drafting• Latches on gates• Solid construction


SheepKING® HANDLING EQUIPMENT

191300 306 204

SHEEPKING® Panels Available in 2.75m

SHEEPKING® Race Bow

SHEEPKING® Manway Panel 2.75m Concrete Posts

SHEEPKING® Drench Panel

SHEEPKING® Slide Gate

SHEEPKING® 2.75m Gate-In-Frame

SHEEPKING® 2.4m Blind Panel






SheepKING® RANGE


SHEEPKING® RANGE

Features:• All products are 1.2m High• 115mm x 42mm visible top rail• 53mm x 35mm anti-bruise panel rails• Dog friendly • Extra high to discourage jumpers • Manufactured from Australian Made

galvanised steel tube• Fully sheeted, galvanised blind panel

option for forcing area

SHEEPKING® 5.5m Double-Gate-In-Frame



SHEEP & goat HANDLING EQUIPMENT

Sheep & Goat Handling Equipment

• 3 unit rotary with stand• Robust construction, suitable for different sized lambs• Legs clamped individually• Automatic releasing• Cradle available in single buy

• Simple manual operation, securely holding sheep around the middle, immobilising them at a safe working height

• 1m high• Available in 2.5m• Manufactured from high strength galvanised steel• Steel caps top and bottom• Compatible with any Metalcorp sheep system

• 2.8 x 1.3m• 7 rail configuration 53mm x 35mm oval • Steel caps top and bottom

LAMB MARKING CRADLE

SHEEP AND GOAT CATCHER

SHEEPMASTER® ECONOMY SHEEP PANEL

ECONOMY GOAT PANEL





211300 306 204

SHEEP YARD DESIGNS

320 HEAD YARD 485 HEAD YARD

740 HEAD YARD655 HEAD YARD

1155 HEAD YARD 1370 HEAD YARD


HORSE YARDS

HORSE KING® management systems

HORSE KING® Round Yards

PREMIER®

The HORSE KING® yard range is manufactured from quality lightweight Australian made steel for easy interchanging of yard components. Its high tensile properties provide great flexibility in the yards to handle any accident to the components that can incur when working.

HORSE KING® round yards are a more flexible option than a permanent round yard. Not only can the size be reduced or increased as needed, the HORSE KING® round yard allows for an effective working environment for both animal and trainer.

PREMIER® is your 6 rail system for all your on farm needs. It is very popular for the horse market.

Features:• Strong 1.6mm Australian made tube• Manufactured from 53x35mm oval rail• Ideal for horse round yards• Fully galvanised• Interchangeable with all of Metalcorp’s other ranges• Rubber matting available for walls around the yard

HORSE KING® 5 Bar 3.1m Panel

PREMIER® 6 Bar 2.1m Panel

PREMIER® High Gate in Frame 6 Bar

2.1m (L) x 3.1m (H)

HORSE KING® High Gate in Frame 5 Bar

2.1m (L) x 3.1m (H)

1 X High Gate in frame & 15 x 3.1m panels

32 pins

15 METER

15M

20 METER1 x High Gate in frame

& 20 x 3.1m panels42 pins

20M

28 METER1 x High Gate in frame

& 28 x 3.1m panels58 pins

28M




Features:• Strong 1.6mm Australian made tube• Manufactured from 53x35mm oval rail• Ideal for horse round yards• Fully galvanised• Interchangeable with all of Metalcorp’s other ranges• Rubber matting available for walls around the yard

231300 306 204

STABLEHAND® MANAGEMENT SYSTEMS

STABLEHAND® Horse Crush

STABLEHAND® Stable Partitions

STABLEHAND® Horse Shelter

Features:• Lightweight• Portable • Easy to transport• Suitable for gymkhanas and

horse shows • Horse float brackets also

available

Features:• Non-slip rubber• Comes with tie down straps• Holds 6 panels• Removable arm

Features:• Inside door which can be opened for quick release• Dual back gates, the top one is removable enabling access for veterinary

procedures while protecting the handler• Removable head restraint allows mouth access while in place• Rotating vet tray that is interchangeable from front to rear• Non-bruising oval rail sides. Equipped with holes for bar restraints which can hold

the animal to the front or rear of the crush• Adjustable bridle holder to handle all sized horses• Front gate, top rail cut out to assist the veterinarian with all procedures

STABLEHAND® Float Panels STABLEHAND® FLOAT BRACKET

The STABLEHAND® horse crush ensures the complete protection of the handler whilst the horse is in a stable.

The STABLEHAND® stable partitions are the perfect choice for both permanent and portable stable solutions. The permanent stable partitions have been designed to fit into any structure and transform it into a strong and durable stable system. The STABLEHAND® stable partitions make taking care of your horses easy while providing you with peace of mind knowing that they are safe and secure.

The STABLEHAND® horse shelter is designed to protect your horses from rain and sun, all year round.


DIMENSIONS: 2000mm (L) x 1330mm (H) PRODUCT NUMBER: 216426 PRODUCT NUMBER: 216427

ROOF AREA: 4.0m x 4.0m INTERNAL AREA: 2.1m (W) x 4.0m (L) x 2.6m (H)


STOCKSAFE® Farm Access Grids

STANDARD SIZE: 4.0m x 2.0m STANDARD MATERIAL: Galvanised RHSSTANDARD FINISH: All welds are painted

All STOCKSAFE® grids are manufactured with mounting brackets for side wings. Wing sets are available to suit as an optional extra. CATTLE KING® Wings constructed with three rails of Cattle Rail.

STOCKSAFE® UNRATED Farm Access Grid

GRID WINGS

NB: Metalcorp reserves the right to produce grid sub-frames from RHS, U-Beams, U-Columns or similar products, the overall height may vary.

Light duty aprilla GRID

Medium duty aprilla GRID

• 2.1m x 3.5m• 500mm High• Single modular units• 40mpa concrete base• 5 year warranty• Grid wings included

• 2.1m x 4.0m• 500mm High• Single modular units• 40mpa concrete base• 5 year warranty• Grid wings included





251300 306 204

Range of Livestock Feeders

jumbo grain feeder

Round bale feeder Multi Feeder


Features:• 2400mm long• Extremely well made. Solid construction• 3000kg grain holding capacity• Ladder and walkway so you can safely inspect from the top• The shutter doors are adjustable to adjust grain flow

Features:• One piece solid construction• 2100mm in diameter• 1550mm high• Made from Australian made

galvanised oval rail

Features:• 2400mm long• Holds up to 4 bales of hay in the

hot dipped galvanised section• Holds up to 4 bags of feed in the

grain section• Adjustable feeding flow

Sheep Lick feeder Cattle lick feeder

Features:• Australian made galvanised

steel• Easy fill design• Heavy duty skids• Adjustable feed control

Features:• Australian made galvanised

steel• Easy fill design• Heavy duty skids• Adjustable feed control


PRODUCT NUMBER: 173723tombstone extensions

Features:• Extend your 2 piece to a 4 piece

to fit square bales• Pins together• Galvanised for paddock conditions

PRODUCT NUMBER: 143332tombstone Feeders

Features:• 2 piece construction• Pins together• Pins are attached with chains

so you wont lose them• Galvanised for paddock conditions



CALF HANDLING EQUIPMENT

Spin Roll Calf Cradle

Calf Crush

CALF RACE CALF YARD COMPONENTS

Features:• 650mm off ground working height• Scissor action, ratchet locking design • Automatic releasing gate • Contoured table for easy access• Adjustable height • Triple protection, enamel coating, super etch undercoat,

galvanised construction

Features:• 1730mm x 500mm• The innovative immobilising swing bar ensures the calf remains

completely still whilst the operator performs their tasks• The upright position relaxes the animal and reduces strain on the

operator• Minimises the chance of infection and provides safer work practices for

calf management including castration and branding;• It is recommended that the cradle be bolted to a concrete slab

Metalcorp’s spin roll table calf cradle is designed for fast processing of calves and energy efficient to the user.

The invention of the Calf Crush is based on the cutting edge vertical design. This type of cradle is designed to hold the calf vertically, in its normal stance, for better restraint.




Features:• 24320mm x 430mm• 2 section Race for cost effective transport• Sheeted Race Gate at front of Race (excellent blocking)• 2 x adjustable Race gates (lockable)• Suits all types of calf cradles

271300 306 204

TRAPS / WIRE WINDERS /WEIGH PRODUCTS

Spear Traps

TRU-TEST weigh equipment

Wire Winders

SPEAR TRAPS WITH GATESSuperior strength medium

and heavy grade steel used in construction of this product ensures longevity of the product. Designed to be attached to any portable yard system.

Weighing replaces guess-work with facts, making it a powerful performance measurement tool for farmers. The information provided by Tru-Test weigh scales assists critical decision making about feed, health treatments and herd size management. Speak to Metalcorp today.

Superior strength medium and heavy grade steel used in construction of this product ensures longevity of the product. Swinging gate attached with robust chain latch to lock any beast within yards.

DIMENSIONS: 2100mm (HIGH), 720mm (OPENING)

DIMENSIONS: 2100mm (HIGH), 720mm (OPENING)

THE HYDRAULIC WINDER MOTORISED WIRE WINDER

• The ultimate tool for wire recovery• Can adjust recoil speed as needed, which

reduces the chance of wire breakage• Can be used for both plain and barbed wire• Category 2, three point mount• Removable wheel for easy unloading of wire• Replaceable moly impregnated polyethylene

bushing on shaft to prevent wear

4 ARM CONFIGURATION 5 ARM CONFIGURATIONPRODUCT NUMBER: 188561

PRODUCT NUMBER: 198775PRODUCT NUMBER: 216277


• 5.5 hp Honda petrol engine• Belt driven on clutch side for easy servicing• Chain driven on reel side• Shaft between clutch and reel drive rides on mounted

bearings for years of use• Clutch can be operated from either side of unit• Standard split reel holds 500m of 1.8HT or 400m of 2.5mm

Barbed wire or 1500m of plain wire.• Reel shaft rides on two moly impregnated poly brushes• Unit is designed with tie off loops on the frame to hold it in

place during operation• A lifting hook in the centre of the machine makes it a one

man operation to load and unload the machine


FENCING

PLAIN WIRE

HINGED JOINT BARBED WIRE

NETTING

GALVANISED POSTS

MAX-LOC HORSE FENCING

BLACK POSTS

STRAINERS & stays

STRAINERS100NB 2100mm100NB 2400mm

STAYS40NB 3250mm50NB 3250mm

HINGED JOINT6x70x30x2.5mm galvanised x 200m8x80x15x2.5m galvanised x 100m6x90x30x2.5m galvanised x 200m7x90x30x2.5m galvanised x 200m8x90x30x2.5m galvanised x 200m

PLAIN WIRE2.5mm galvanised MT-1500mm2.5mm galvanised HT-1500mm2.8mm galvanised HT-1000mm3.15mm galvanised ST-750mm4.0mm galvanised ST-500mm

BARBED WIRE1.57mm high tensile galvanised 500m1.8mm high tensile galvanised 500m2.5mm IOWA galvanised 400m

NETTINGNET-HX-40-40-1.4-300-100mNET-HX-40-40-1.4-900-100mNET-HX-40-40-1.4-1050-100m

Post driver

Posts available in:• 165cm• 180cm

Posts available in:• 45cm • 135mm • 210mm• 60cm • 165mm • 240mm• 90cm • 180mm

METALCORP POST DRIVER • 800mm long• Solid construction

291300 306 204

YARD BUILDING PRODUCTS

VERTICAL BRACE (MESH) GATES (1170mm High)

WOPS & WOS FITTINGS

WELDING HEMLET

CATTLE CABLE

CAPS AVAILABLE TO SUIT SLAM LATCHES GATE HINGE PACKS

6 BAR GATES (1490mm High)

N-STAY GATES (1170mm high)

5 BAR GATES (1170mm High)

DIY CATTLE YARD FENCING OPTIONS

Features:• 7 strand• Galvanised• 400m roll

We stock a wide range of material and fittings for your permanent yard systems.

VERTICAL BRACE (MESH) GATES (1170mm High)850mm [3’] No Brace 8kg1160mm [4’] No Brace 10kg1460mm [5’] No Brace 13kg1770mm [6’] No Brace 14kg2070mm [7’] No Brace 16kg2380mm [8’] 1 Brace 20kg2980mm [10’] 1 Brace 22kg3580mm [12’] 1 Brace 26kg4180mm [14’] 2 Braces 31kg4780mm [16’] 2 Braces 36kg

2980mm [10’] N Brace 26kg3580mm [12’] N Brace 29kg4180mm [14’] N Brace 33kg4780mm [16’] N Brace 37kg

6 Bar gates come in limited sizes and can be made to order

2370mm [8’] 1 Brace 25kg2970mm [10’] 1 Brace 29kg3570mm [12’] 1 Brace 34kg4170mm [14’] 2 Braces 41kg4780mm [16’] 2 Braces 44kg

Cattle RailCATTLE RAIL

Features:• Available in galvanised or painted• Other rail sizes available

115 x 42 x 2mm x 6100mm

Features:• Available in 12, 16, 20 & 27mm

Features:• Auto Darkening with grind mode• Helmets are solar powered

Features:• Available in 10,14, 20 & 25mm


Features:• Round caps available from

20nb – 150nb • Square caps available from

25sq – 125sq


ELECTRIC FENCING

2.5km SOLAR energiser

GATE HANDLE

FAULT LOCATOR

Electric fence warning sign

200m 12mm TAPE

15km Main Energiser

GEARED REELS

7.5km battery energiser

Cattle prodder

10km Solar energiser

311300 306 204

ELECTRIC FENCING

CUT OUT SWITCHSTEEL POST CAP INSULATOR PORCELAIN RACKET STRAINER

UNDERGROUND CABLE 150mm plastic stand off

Steel post insulator

split bolt Wire Joint Clamp

Porcelain large REEL insulator

300mm Porcelain Reel Offset

Porcelain end strain insulator

Super end strain insulator

Steel post pinlock insulator

32 www.metalcorpsteel.com.aumetalcorp.com.au 1300 306 204

Your rural steel expert!

The information contained in this brochure is provided by way of general information only, and should not be relied upon by any person. You must seek specific advice as to the suitability of the products featured in this brochure for the purpose for which, and the manner in which, you propose to use them. This may involve further independent analysis and

testing. Metalcorp, and its related bodies corporate take no responsibility for any adverse consequences of any nature which arise as a result of reliance on this brochure © 2015. Metalcorp is a registered Trademark of BlueScope Steel Limited (ABN 88 096 380 068).

livestock handling & farm products range - … handling & farm products range 2016 catalogue...

Documents