literaturverzeichnis - springer978-3-662-56208-6/1.pdf · literaturverzeichnis 169...

Literaturverzeichnis 169

Literaturverzeichnis

[ALS06] Al-Sulaiman, F. A.; Yilbas, B. S.; Ahsan, M.: CO2 laser cutting of a

carbon/carbon multi-lamelled plain-weave structure. Journal of Materials

Processing Technology, Band 173, Heft 3, 2006, Seiten 345-351.

[ALB13] Alberdi, A.; Suárez, A.; Artaza, T.; Escobar-Palafox, G.A.; Ridgway, K.:

Composite Cutting with Abrasive Water Jet. Procedia Engineering, Band 63,

2013, Seiten 421-429.

[BAI07] Bai, Y.; Vallée, T.; Keller, T.: Modeling of thermo-physical properties for FRP

composites under elevated and high temperature. Composites Science and

Technology, Band 67, Heft 15-16, 2007, Seiten 3098-3109.

[BAR12a] Bargel, H.-J.; Schulze, G.: Werkstoffkunde. 11. Auflage, Berlin, Heidelberg,

Dordrecht, London, New York, Verlag Springer Vieweg, 2012.

[BAR12b] Barth, F.-M.: Thermodynamik für Maschinenbauer. München, Verlag

Oldenburg, 2012.

[BAY09] Bayer, W.: Energie auf einen Blick. Ausgabe 2009, Statistisches Bundesamt

(Hrsg.), Wiesbaden, 2009.

[BOS15] Bossi, R.H.; Giurgiutiu, V.: Nondestructive testing of damage in aerospace

composites. Polymer Composites in the Aerospace Industry, 2015, Seiten 413-

448.

[BUN89] Bundy, F.P.: Pressure-temperature phase diagram of elemental carbon. Physica

A: Statistical Mechanics and its Applications, Band 156, Heft 1, 1989, Seiten

169-178.

[BUS89] Busch, H.; Holländer, W.; Levsen, K.; Schilhabel, J.; Trasser, F.J.; Neder, L.:

Aerosol formation during laser cutting of fibre reinforced plastics. Journal of

Aerosol Science, Band 20, Heft 8, 1989, Seiten 1473-1476.

[BLU13] Bluemel, S.; Staehr, R.; Jaeschke, P.; Stute, U.: Determination of Corresponding

Temperature Distribution within CFRP during Laser Cutting. Physics Procedia,

Band 41, 2013, Seiten 408-414.

[BLU14a] Bluemel, S.; Brede, S.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Applying a

DOE model for the determination of appropriate process windows for

nanosecond laser processing of CFRP, ICALEO, 19.-23. Okt. 2014, San Diego,

Kalifornien, USA, Beitrag 707.

[BLU14b] Bluemel, S.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Comparative study of

achievable quality cutting carbon fibre reinforced thermoplastics using

continuous wave and pulsed laser sources. Physics Procedia, Band 56, 2014,

Seiten 1143-1152.

[BLU15] Bluemel, S.; Staehr, R.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Correlation

of internal and surface temperatures during laser cutting of epoxy-based carbon

fibre reinforced plastics. Journal of Reinforced Plastics and Composites. Band

34, Heft 8, 2015, Seiten 662-671.

[CAN14] Canisius, M.; Herzog, D.; Schmidt-Lehr, M.; Oberlander, M.; Albert, F.;

Broetje, S.; Ploog, P.; Emmelmann, C.: Virtual process chain for simulation of

heat affected zones during laser cutting of carbon fibre-reinforced plastics.

Tagungsband, NAFEMS Seminar “Simulation von Composites – Eine

geschlossene Prozesskette?”, 28.-29. Oktober 2014, Leipzig, Deutschland,

Seiten 274-282.

[CAN15a] Canisius, M.; Herzog, D.; Schmidt-Lehr, M.; Oberlander, M.; Direnga, J.;

Emmelmann, C.: Laser cutting of carbon fiber-reinforced plastic with an

absorber transparent for visible spectrum. Journal of Laser Applications, Band

27, 2015, Seite 032003.

© Springer-Verlag GmbH Deutschland 2018M. Canisius, Prozessgüte für das Laserstrahltrennen kohlenstofffaserverstärkter Kunststoffe, Light Engineeringfür die Praxis, https://doi.org/10.1007/978-3-662-56208-6

170 Literaturverzeichnis

[CAN15b] Canisius, M.; Oberlander, M.; Herzog, D.; Schmidt-Lehr, M.; Ploog, P.; Albert,

F.; Emmelmann, C.: Correlation between Temperature Field and Heat Affected

Zone during Laser Cutting of Carbon Fiber Reinforced Polymers. Tagungsband,

Lasers in Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland,

Beitrag 260.

[CAN16] Canisius, M.; Albert, F.: Remote Laser Drilling of Carbon Fiber Reinforced

Polymers supported by Simulation. 2016.

https://www.youtube.com/watch?v=mwt0IzXd8ig

[CAP95] Caprino, G.; Tagliaferri, V.; Govelli, L.: Cutting CFRP using CO2 laser with

multimodal Gaussian distribution. International Journal of Machine Tools and

Manufacture, Band 35, Heft 6, 1995, Seiten 831-840.

[CEN97] Cenna, A.A.; Mathew, P.: Evaluation of cut quality of fibre-reinforced plastics—

A review. International Journal of Machine Tools and Manufacture, Band 37,

Heft 6, 1997, Seiten 723-736.

[CEN02] Cenna, A.A.; Mathew, P.: Analysis and prediction of laser cutting parameters of

fibre reinforced plastics (FRP) composite materials. International Journal of

Machine Tools & Manufacture, Band 42, 2002, Seiten 105-113.

[CHA83] Chamis, C.C.: Simplified composite micro-mechanics equations for hygral,

thermal and mechanical properties. Tagungsband, 38th Annual Conference of

the Society of the Plastics Industry (SPI), Reinforced Plastics/Composites

Institute, 7.-11. Feb. 1983, Houston, Texas.

[CHE91] Chen, C.-C.; Cheng, W.: Material properties and laser cutting of composites.

Proceedings 23rd International SAMPE Technical Conference, 21.-24. Okt.

1991, Seiten 274-287.

[CHE98] Cheng, C.F.; Tsui, Y.C., Clyne, T.W.: Application of a three-dimensional heat

flow model to treat laser drilling of carbon fibre composites. Acta Materialia,

Band 46, Heft 12, 1998, Seiten 4273-4285.

[DAB72] Dabby, F.W.; Paek, U.-C.: High intensity laser-induced vaporization and

explosion of solid material. IEEE Journal of Quantum Electronics, Band QE-8,

1972, Seiten 106-111.

[DAH08] Dahotre, N. B.; Harimkar, S.: Laser Fabrication and Machining of Materials.

Berlin, Verlag Springer US, 2008.

[DAO16] Dao, D.Q.; Rogaume, T.; Luche, J.; Richard, F.; Valencia, L. B.; Ruban, S.:

Thermal degradation of epoxy resin/carbon fiber composites: Influence of

carbon fiber fraction on the fire reaction properties and on the gaseous species

release; Fire and Materials, Band 40, Heft 1, 2016, Seiten 27-47

[DEN07] Denkena, B.; Völkermeyer, F.; Kling, R.; Hermsdorf, J.: Novel UV-Laser

Applications for Carbon Fiber Reinforced Plastics. APT 07, International

Conference on Applied Production Technology, Production of Aircraft

Structures, 17.-19. September 2007, Bremen, Seiten 99-108.

[DII89] Di Ilio, A.; Tagliaferri, V.: Thermal damage in laser cutting of (0/90)2s

aramid/epoxy laminates. Composites, Band 20, Heft 2, 1989, Seiten 115-119.

[DII90] Di Ilio, A.; Tagliaferri, V.; Veniali, F.: Machining parameters and cut quality in

laser cutting of aramid fibre reinforced plastics. Materials and Manufacturing

Processes, Band 5, 1990, Seiten 591-608.

[DIT13] Dittmar, H.; Gäbler, F.; Stute, U.: UV-laser Ablation of Fibre Reinforced

Composites with Ns-Pulses. Physics Procedia, Band 41, 2013, Seiten 266-275.

[EMM13] Emmelmann, C.; Herzog, D.; Canisius, M.: Laser-Remote-Schneiden –

Großserienfähiges Trennverfahren für Faserverbundkunststoffe. 19. Nationales

Symposium SAMPE Deutschland e.V., 27.-28. Februar 2013, Hamburg, S. 68-

70.

[EMM11] Emmelmann, C.; Petersen, M.; Goeke, A.; Canisius, M.: Analysis of Laser


Ablation of CFRP by Ultra-Short Laser Pulses with Short Wavelength. Physics

Procedia, Band 12, Teil A, 2011, Seiten 565-571.

[FAA17] Faas, S.; Freitag, C.; Boley, S.; Berger, P.; Weber, R.; Graf, T.: Flow speed of

the ablation vapors generated during laser drilling of CFRP with a continuous-

wave laser beam. Appl. Phys. A, Band 123, Heft 156, 2017.

[FEN94] Fenoughty, K. A.; Jawaid, A.; Pashby, I. R.: Machining of advanced engineering

materials using traditional and laser techniques. Journal of materials processing

technology, Band 42, 1994, Seiten 391-400.

[FIS12] Fischer, F.; Kreling, S.; Dilger, K.: Surface Structuring of CFRP by using

Modern Excimer Laser Sources. Physics Procedia, Band 39, 2012, Seiten 154-

160.

[FIS08] Fischer, U.; Gomeringer, R.; Heinzler, M.; Kilgus, R.; Näher, F.; Oesterle, S.;

Paetzold, H.; Stephan, A.: Tabellenbuch Metall. 44. Auflage, Haan-Gruiten,

Verlag Europa-Lehrmittel, Nourney, Vollmer, 2008.

[FRE15] Freitag, C.; Alter, L.; Weber, R.; Graf, T.: Theoretical and experimental

determination of the polarization dependent absorptance of laser radiation in

carbon fibers and CFRP. Tagungsband, Lasers in Manufacturing Conference,

21.-25. Jun. 2015, München, Deutschland, Beitrag 111.

[FRE12] Freitag, C.; Onuseit, V.; Weber, R.; Graf, T.: High-speed Observation of the

Heat Flow in CFRP During Laser Processing. Physics Procedia, Band 39, 2012,

Seiten 171-178.

[FRE14] Freitag, C.; Wiedenmann, M.; Negel, J.-P.; Loescher, A.; Onuseit, V.; Weber,

R.; Abdou-Ahmed, M.; Graf, T.: Ultra-Short Pulse Laser Processing of CFRP

with Kilowatt Average Power. Tagungsband, ICALEO, 19.-23. Okt. 2014, San

Diego, Kalifornien, USA, Beitrag 702.

[FRE09] French, P. W.; Naeem, M.; Clowes, J.; Sharp, M. C.: Fibre laser material

processing of Aerospace Composites. Tagungsband, Fifth International WLT-

Conference on Lasers in Manufacturing, 15.-18. Jun. 2009, München,

Deutschland, Beitrag 902.

[FRI13] Friedrich, H. E.: Leichtbau in der Fahrzeugtechnik. Wiesbaden, Verlag Springer

Vieweg, 2013.

[FUC13] Fuchs, A. N.; Schoeberl, M.; Tremmer, J.; Zaeh, M. F.: Laser Cutting of Carbon

Fiber Fabrics. Physics Procedia, Band 41, 2013, Seiten 372-380.

[FUC15] Fuchs, A. N.; Woldrich, T.; Heimhilger, K. M.; Zaeh, M. F.: Analytical Model

for Laser Cutting of Carbon Fiber Fabrics: Maximum Cutting Speed and the

Heat Affected Zone. Tagungsband, Lasers in Manufacturing Conference, 21.-25.

Jun. 2015, München, Deutschland, Beitrag 177.

[FUE15] Fürst, A.; Hipp, D.; Rose, M.; Klotzbach, A.; Hauptmann, J.; Wetzig, A.; Beyer,

E.: Experimental and Analytical Description of the Multi Wavelength Remote

Laser Ablation Process at Fiber Reinforced Polymers. Tagungsband, Lasers in

Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag

230.

[FUE13] Fürst, A.; Klotzbach, A.; Hühne, S.; Hauptmann, J.; Beyer, E.: Remote Laser

Processing of Composite Materials with Different Opto–Thermic Properties.

Physics Procedia, Band 41, 2013, Seiten 389-398

[FUJ13] Fujita, M.; Somekawa, T.; Miyanaga, N.: Micromachining of CFRP with Ultra-

Short Laser Pulses. Physics Procedia, Band 41, 2013, Seiten 636-639.

[GEI14] Geis, T.; Klingelhöller, C.; Hintze, W.: Constant Depth Scoring of Fibre

Reinforced Plastic Structures to Prevent Delamination. Procedia CIRP, Band 14,

2014, Seiten 205-210.

[GLA06] Glaser, S.: Colorants and special additives for laser welding. Konferenzband

Joining Plastics 2006, 25.-26. April 2006, London, UK, Beitrag 23.


[GOE10] Goeke, A.; Emmelmann, C.: Influence of Laser Cutting Parameters on CFRP

Part Quality. Physics Procedia, Band 5, 2010, Seiten 253-258.

[GOE11] Goeke, A.: Laserstrahltrennen von Faserverbundkunststoffen. 1. Auflage,

Göttingen, Verlag Cuvillier, 2011.

[GRA12] Graf, T.; Weber, R.: Die besonderen Herausforderungen beim Laserschneiden

von CFK. In: Laser Magazin (2012) 1, Seiten 26-27.

[HAR12] Harada Y.; Kawai, K.; Suzuki, T.; Teramoto, T.: Evaluation of Cutting Process

on the Tensile and Fatigue Strength of CFRP Composites. Materials Science

Forum, Band 706-709, 2012, Seiten 649-654.

[HAT12] Hatwig, J.; Minnerup, P.; Zaeh, M.F.; Reinhart, G.; An automated path planning

system for a robot with a laser scanner for remote laser cutting and welding.

Tagungsband, 2012 IEEE International Conference on Mechatronics and

Automation (ICMA 2012), 5.-8. August 2012, Chengdu, China, Seiten 1323–

1328.

[HAR96] Hartwig, A.; Vitr, G.; Dieckhoff, S.; Hennemann, O. -D.: Surface treatment of

an epoxy resin by CO2 laser irradiation. Die Angewandte Makromolekulare

Chemie, Band 238, Nr. 4187, 1996, Seiten 177-189.

[HER08] Herzog, D., Jaeschke, P., Meier, O., Haferkamp, H.: Investigations on the

thermal effect caused by laser cutting with respect to static strength of CFRP.

International Journal of Machine Tools and Manufacture, Band 48, 2008, Seiten

1464-1473.

[HER14a] Herzog, D.; Canisius, M.; Schmidt-Lehr, M.; Rörig, B.; Schlude, N.; Hammer,

T.; Emmelmann, C.: Großserientauglicher Trennprozess – Endkonturzuschnitt

an CFK-Bauteilen durch Laser-Remote-Bearbeitung. In: Kunststoffe (2014) 6,

Seiten 46-49.

[HER14b] Herzog, D.; Schmidt-Lehr, M.; Canisius, M.; Oberlander, M.; Tasche, J.;

Emmelmann, C.: Laser cutting of CFRP using a 30 kW fiber laser.

Tagungsband, ICALEO, 19.-23. Okt. 2014, San Diego, Kalifornien, USA,

Beitrag 701.

[HER15b] Herzog, D.; Canisius, M.; Schmidt-Lehr, M.; Hergoss, P.; Daniel, C.; Hallmann,

S.; Emmelmann, C.; Scherner, M. V.: Investigations on the 3D Laser Cutting of

CFRP using a Nanosecond Pulse Fibre Laser. In: Applied Polymer Composites,

Band 2, Heft 4, 2015, Seiten 177-192.

[HER15a] Herzog, D.; Schmidt-Lehr, M.; Canisius, M.; Oberlander, M.; Emmelmann,C.:

Influence of laser cutting on handling, drape and infusion characteristics of

preforms. Proceedings of ICCST/10, 2.-4. September 2015, Lissabon, paper ID:

31.

[HIN07] Hintze, W.; Dose, F.; Hartmann, D.; Santos Quiroz, S.; Schwerdt, M.: Cutting,

abrasive and laser technologies for CFRP machining: State of the art and future

trends. Proceedings of the 2nd International Conference "Supply on the wings",

AIRTEC 2007, 24.-25.10.2007, Frankfurt (Main).

[HIN16] Hintze, W.; Cordes, M.; Geis, T.; Blühm, M.; Emmelmann, C.; Canisius, M.:

Laser Scored Machining of Fiber Reinforced Plastics to Prevent Delamination.

Procedia Manufacturing, Band 6, 2016, Seiten 1-8.

[HIN13] Hintze, W.; Hartmann, D.: Modeling of Delamination During Milling of

Unidirectional CFRP. Procedia CIRP, Band 8, 2013, Seiten 444-449.

[HOC13] Hocheng, H.; Tsai, H.-Y.: Advanced analysis of nontraditional machining. New

York, Verlag NY Springer, 2013.

[HOC93] Hocheng, H.; Pan, C.T.: Section area of heat affected zone in laser cutting of

carbon fibre-reinforced peek. Machining of Advanced Composites, MD-Vol.

45/PED-Vol. 66. ASME, 1993, Seiten 153-165.

[JAE10] Jaeschke, P.; Herzog, D.; Noelke, C.; Henning, B,; Haferkamp, H.:


Investigations into the Sealing of Heat Damaged Areas by Applying Polymer

Powders During Laser Cutting of Carbon Fiber Reinforced Composites.

Advanced Engineering Materials, Band 12, Nr. 7, 2010, Seiten 587-590.

[JAE14] Jaeschke, P.; Kern, M.; Stute, U.; Kracht, D.; Haferkamp, H.: Laser processing

of continuous carbon fibre reinforced polyphenylene sulfide organic sheets -

correlation of process parameters and reduction in static tensile strength

properties. Journal of Thermoplastic Composite Materials, Band 27, Nr. 3, 2014,

Seiten 324-337.

[JAR13] Jarwitz, M.; Onuseit, V.; Weber, R.; Graf, T.: Spectral Analysis of Laser

Processing of Carbon Fiber Reinforced Plastics. Physics Procedia, Band 41,

2013, Seiten 496-501.

[JUN13] Jung, K.-W.; Kawahito Y.; Katayama S.: Ultra High Speed Laser Cutting of

CFRP Using a Scanner Head. Transactions of JWRI, Band 42, Nr. 2, 2013,

Seiten 9-14.

[KIM96] Kim, M.J., Majumdar, P.: Boundary element method in evaporative laser

cutting. Applied Mathematical Modelling, Band 20, Heft 4, 1996, Seiten 274-

282.

[KIM00] Kim, M.J.: Transient evaporative laser-cutting with boundary element method.

Applied Mathematical Modelling, Band 25, Heft 1, 2000, Seiten 25-39.

[KIM04] Kim, M.J.: Transient evaporative laser cutting with moving laser by boundary

element method. Applied Mathematical Modelling, Band 28, Heft 10, 2004,

Seiten 891-910.

[KIM01] Kim, M.J.; Zhang, J.: Finite element analysis of evaporative cutting with a

moving high energy pulsed laser. Applied Mathematical Modelling, Band 25,

Heft 3, 2001, Seiten 203-220.

[KLO11a] Klotzbach, A.; Hauser, M.; Beyer, E.: Laser Cutting of Carbon Fiber Reinforced

Polymers using Highly Brilliant Laser Beam Sources. Physics Procedia, Band

12, Teil A, 2011, Seiten 572-577.

[KLO11b] Klotzbach, A.; Vessio, P.; Klotzbach, U.; Hauptmann, J.: Investigations in

Remote Cutting of Carbon Fiber Composite Materials. Tagungsband, ICALEO,

23.-27. Okt. 2011, Orlando, Florida, USA, Beitrag 1201.

[KRE13] Kreling, S.; Fischer, F.; Delmdahl, R.; Gäbler, F.; Dilger, K.: Analytical

Characterization of CFRP Laser Treated by Excimer Laser Radiation. Physics

Procedia, Band 41, 2013, Seiten 282-290.

[KRU96] Kruger, J.; Kautek, W.: Femtosecond pulse visible laser processing of fibre

composite materials. Applied Surface Science, Band 106, 1996, Seiten 383-389.

[LEO09] Leone, C.; Pagano, N.; Lopresto, V.; De Iorio, I.: Solid state Nd:YAG laser

cutting of CFRP sheet: Influence of process parameters on kerf geometry and

HAZ. Proceedings of 17th Int. Conf. on Composite Materials - ICCM-17,

Edinburgh UK, 2009, Seiten 1-10.

[LEO13] Leone, C.; Papa, I.; Tagliaferri, F.; Lopresto, V.: Investigation of CFRP laser

milling using a 30W Q-switched Yb:YAG fiber laser: Effect of process

parameters on removal mechanisms and HAZ formation. Composites Part A:

Applied Science and Manufacturing, Band 55, 2013, Seiten 129-142.

[LEO14] Leone, C.; Genna, S.; Tagliaferri, V.; Fibre laser cutting of CFRP thin sheets by

multi-passes scan technique. Optics and Lasers in Engineering, Band 53, 2014,

Seiten 43-50.

[LI10a] Li, Z.L.; Chu, P.L.; Zheng, H.Y.; Lim, G.C.; Li, L.; Marimuthu, S.; Negarestani,

R.; Sheikh, M.; Mativenga, P.: Laser machining of carbon fibre-reinforced

plastic composites. Advances in Laser Materials Processing, 2010, Seiten 136-

177.

[LI08] Li, Z.L.; Chu, P.L.; Zheng, H.Y.; Lim, G.C.; Li, L.; Negarestani, R.; Marimuthu,


S.; Sheikh, M.; Mativenga, P.: Process Development of Laser Machining of

Carbon Fibre Reinforced Plastic Composites. Tagungsband, ICALEO, 20.-23.

Okt. 2008, Temecula, Kalifornien, USA, Beitrag 406.

[LI09] Li, Z. L.; Chu, P. L.; Zheng, H. Y.; Lim, G. C.: Process development of laser

machining of carbon fibre reinforced plastic composites. SIMTech technical

reports, Band 10, Nr. 1, 2009.

[LI10b] Li, Z.L.; Zheng, H.Y.; Lim, G.C.; Chu, P.L.; Li, L.: Study on UV laser

machining quality of carbon fibre reinforced composites. Composites Part A:

Applied Science and Manufacturing, Band 41, Heft 10, 2010, Seiten 1403-1408.

[LIE98] Liebelt, S.: Analyse und Simulation des Laserstrahlschneidens von

Faserverbundkunststoffen. Berlin, Verlag PTZ [u.a.], 1998.

[LOP09] Lopez de Lacalle, N.; Lamikiz, A.; Campa, F.J.; Valdivielso, A.; Etxeberria, I.:

Design and Test of a Multitooth Tool for CFRP Milling, Journal of Composite

Materials 43, 2009, Seiten 3275-3290.

[MAL95] Malkusch, W.; Rehn, B.; Bruch, J.; In vitro method for medical risk assessment

of laser fumes. Optics & Laser Technology, Band 27, Heft 1, 1995, Seiten 39-

43.

[MAR95] Marek, R.; Götz, W.: Numerische Lösung von partiellen Differentialgleichungen

mit finiten Differenzen : eine methodische Einführung am Beispiel der

Wärmeleitung. Buchloe, Verlag Moreno, 1995.

[MAT99a] Mathew, J.; Goswami, G. L.; Ramakrishnan, N.; Naik, N. K.: Parametric studies

on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites.

Journal of Materials Processing Technology, Band 89–90, 1999, Seiten 198-203.

[MAT99b] Matthams, T.J.; Clyne, T.W.: Mechanical properties of long-fibre thermoplastic

composites with laser drilled microperforations: 1. Effect of perforations in

consolidated material. Composites Science and Technology, Band 59, Heft 8,

1999, Seiten 1169-1180.

[MAT99c] Matthams, T.J.; Clyne, T.W.: Mechanical properties of long-fibre thermoplastic

composites with laser drilled microperforations: 2. Effect of prior plastic strain.

Composites Science and Technology, Band 59, Heft 8, 1999, Seiten 1181-1187.

[MEL86] Mello, M.D.; Laser Cutting Of Non-Metallic Composites, Proceedings SPIE

0668, Laser Processing: Fundamentals, Applications, and Systems Engineering,

1986, Seiten 288-290.

[MOD96] Modest, M.F.: Three-dimensional, transient model for laser machining of

ablating/decomposing materials. International Journal of Heat and Mass

Transfer, Band 39, Heft 2, 1996, Seiten 221-234.

[MUE15] Müller-Hummel, P.: Werkzeuglösungen zur Bearbeitung von CFK – Praxistests

zum Vergleich der Technologien „Wasserstrahlschneiden“ und „Mechanische

Bearbeitung“, unter: http://www.carbon-composites.eu/sites/carbon-

composites.eu/files/anhaenge/gruppen/12/12/13/02_fi_mp_bf_4.pdf (abgerufen

am 04.02.2015).

[MUC13] Mucha, P.; Speker, N.; Weber, R.; Graf, T.: Momentum and velocity of the

ablated material in laser machining of carbon fiber preforms. Applied Physics A,

Band 113, Heft 2, 2013, Seiten 361-366.

[MUC14]

Mucha, P.; Weber, R.; Speker, N.; Berger, P,; Sommer, B.; Graf, T.: Calibrated

Heat Flow Model for Determining the Heat Conduction Losses in Laser Cutting

of CFRP. Physics Procedia, Band 56, 2014, Seiten 1208-1217.

[MUC15] Mucha, P.; Qualitäts- und produktivitätsbeeinflussende Mechanismen beim

Laserschneiden von CF und CFK. München, Herbert Utz Verlag, 2015.

[MUR15] Muramatsu, M.; Harada, Y.; Suzuki, T.; Niino, H.: Infrared stress measurements

of thermal damage to laser-processed carbon fiber reinforced plastics.

Composites Part A: Applied Science and Manufacturing, Band 68, 2015, Seiten


242-250.

[NN12] N.N.: Dritter Fortschrittsbericht der Nationalen Plattform Elektromobilität.

Gemeinsame Geschäftsstelle Elektromobilität der Bundesregierung (Hrsg.),

Bundesministerium für Verkehr, Bau und Stadtentwicklung, Bonn, 2012.

[NN14] N.N.: Verkehr im Überblick. Fachserie 8 Reihe 1.2 - 2013, Statistisches

Bundesamt (Hrsg.), Wiesbaden, 2014.

[NEG12] Negarestani, R.; Li, L.: Laser machining of fibre-reinforced polymeric

composite materials. Machining Technology for Composite Materials, 2012,

Seiten 288-308.

[NEG10a] Negarestani, R.; Li, L.; Sezer, H. K.; Whitehead, D.; Methven, J.: Nano-second

pulsed DPSS Nd:YAG laser cutting of CFRP composites with mixed reactive

and inert gases. International Journal of Advanced Manufacturing Technology,

Band 49, Heft 5-8, 2010, Seiten 553-566

[NEG10b] Negarestani, R.; Sundar, M.; Sheikh, M.A.; Mativenga, P.; Li, L.; Li, Z. L.; Chu,

P.L.; Khin, C.C.; Zheng, H.Y.; LIM, G.C.: Numerical simulation of laser

machining of carbon-fibre-reinforced composites. Proceedings of the Institution

of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Band

224, Heft 7, 2010, Seiten 1017-1027.

[NEI14] Neitzel, M.; Mitschang, P.; Breuer, U.: Handbuch Verbundwerkstoffe:

Werkstoffe, Verarbeitung, Anwendung. München, Verlag Hanser, Carl, 2014.

[NII13] Niino, H.; Kawaguchi, Y.; Sato, T.; Narazaki, A.; Kurosaki, R.; Muramatsu, M.;

Harada, Y.; Wakabayashi, K.; Nagashima, T.; Kase, Z.; Matsushita, M.;

Furukawa, K.; Nishino, M.: Laser cutting of carbon fiber reinforced plastics

(CFRP) by 1kW cw fiber laser irradiation. Proc. SPIE 8607, Laser Applications

in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVIII, Beitrag

860714, 2013.

[NII14] Niino, H.; Kawaguchi, Y.; Sato, T.; Narazaki, A.; Kurosaki, R.; Muramatsu, M.;

Harada, Y.; Anzai, K.; Wakabayashi, K.; Nagashima, T.; Kase, Z.; Matsushita,

M.; Furukawa, K.; Nishino, M.: Laser Cutting of Carbon Fiber Reinforced

Thermo-Plastic (CFRTP) by IR Laser Irradiation. JLMN-Journal of Laser

Micro/Nanoengineering, Band 9, Nr. 2, 2014, Seiten 180-186.

[OBE15] Oberlander, M.; Schmidt-Lehr, M.; Herzog, D.; Canisius, M.; Emmelmann, C.:

Laser-remote-cutting of large-scale semi-finished carbon-fiber products using a

solid state laser. Tagungsband, Lasers in Manufacturing Conference, 21.-25. Jun.

2015, München, Deutschland, Beitrag 137.

[OHK14] Ohkubo, T.; Tsukamoto, M.; Sato, Y.: Numerical Simulation of Laser Beam

Cutting of Carbon Fiber Reinforced Plastics. Physics Procedia, Band 56, 2014,

Seiten 1165-1170.

[ONU15] Onuseit, V.; Prieß, T.; Wiedenmann, M.; Freitag, C.; Faisst, B.; Giedl-Wagner,

R.; Rettich, T.; Weber, R.; Middendorf, P.; Graf, T.: Productive Laser

Processing of CFRP. Tagungsband, Lasers in Manufacturing Conference, 21.-

25. Jun. 2015, München, Deutschland, Beitrag 268.

[PAN96] Pan, C. T.; Hocheng, H.: The anisotropic heat-affected zone in the laser

grooving of fiber-reinforced composite material. Journal of Materials Processing

Technology, Band 62, Heft 1–3, 1996, Seiten 54-60.

[PAN98] Pan, C. T.; Hocheng, H.: Prediction of laser-induced thermal damage of fiber

mat and fiber MatUD reinforced polymers. Journal of Materials Engineering and

Performance, Band 7, Heft 6, 1998, Seiten 751-756.

[PAU82] Paufler, P: Phasendiagramme. Braunschweig, Wiesbaden, Verlag: Vieweg,

1982.

[PIE94] Pietro, M.; Cristina, R.; Marco, B.; Beyer, E.; Cantello, M.; La Rocca, A.V.;

Laude, L.D.; Olsen, F.O.; Sepold, G.: Mathematical modelling of laser treatment


processes. Proceedings SPIE 2207, Laser Materials Processing: Industrial and

Microelectronics Applications, 07. September 1994, Seiten 256-268.

[POP05] Poprawe, R.: Lasertechnik für die Fertigung : Grundlagen, Perspektiven und

Beispiele für den innovativen Ingenieur. Berlin, Heidelberg, New York, Verlag

Springer, 2005.

[ROD02] Rodden, W.S.O.; Kudesia, S.S.; Hand, D.P.; Jones, J.D.C.: A comprehensive

study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre

composites. Optics Communications, Band 210, Heft 3-6, 2002, Seiten 319-328.

[RIV12] Riveiro, A.; Quintero, F.; Lusquiños, F.; del Val, J.; Comesaña, R.; Boutinguiza,

M.; Pou, J.: Experimental study on the CO2 laser cutting of carbon fiber

reinforced plastic composite. Composites Part A: Applied Science and

Manufacturing, Band 43, Heft 8, 2012, Seiten 1400-1409.

[ROM12] Romoli, L.; Fischer, F.; Kling, R.: A study on UV laser drilling of PEEK

reinforced with carbon fibers. Optics and Lasers in Engineering, Band 50, Heft

3, 2012, Seiten 449-457.

[SAT15] Sato, Y.; Tsukamoto, M.; Matsuoka, F.; Yamashita, K.; Masuno, S.: Effect of

several gas ambiences on HAZ suppression in CFRP cutting with nanosecond

laser. Tagungsband, Lasers in Manufacturing Conference, 21.-25. Jun. 2015,

München, Deutschland, Beitrag 248.

[SAT13] Sato, Y.; Tsukamoto, M.; Nariyama, T.; Nakai, K.; Takahashi, K.; Masuno, S.;

Nakano, H.: Experimental study of CFRP cutting with nanosecond lasers.

Transactions of JWRI, Band 42, Nr. 1, 2013, Seiten 23-26.

[SCH13a] Schilling, N.; Lasagni, A.; Klotzbach, U.: Energy Dependent Processing of Fiber

Reinforced Plastics with Ultra Short Laser Pulses. Physics Procedia, Band 41,

2013, Seiten 421-427.

[SCH15a] Schmidt-Lehr, M.; Oberlander, M.; Herzog, D., Canisius, M.; Radek, M.;

Emmelmann, C.: Investigations on the process strategy of laser remote cutting of

carbon reinforced plastics with a thickness of more than 3 mm. ICCM20,

Copenhagen, 19.-25. Jul. 2015.

[SCH15b] Schneider, F.; Wolf, N.; Engelmann, C.; Moll, W.; Petring D.: Laser Cutting and

Joining in a Novel Process Chain for Fibre Reinforced Plastics. Tagungsband,

Lasers in Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland,

Beitrag 127.

[SCH13b] Schneider, F.: Wolf, N.; Petring, D.: High Power Laser Cutting of Fiber

Reinforced Thermoplastic Polymers with cw- and Pulsed Lasers. Physics

Procedia, Band 41, 2013, Seiten 415-420.

[SCH05] Schürmann, H.; Konstruieren mit Faser-Kunststoff-Verbunden. Berlin,

Heidelberg, New York, Verlag Springer, 2005.

[SHA13] Sha, W.: Steels – From Materials Science to Structural Engineering. London,

Heidelberg, New York, Dordrecht, Verlag Springer, 2013.

[SHA02] Shanmugam, D.K.; Chen, F.L.; Siores, E.; Brandt, M.: Comparative study of

jetting machining technologies over laser machining technology for cutting

composite materials. Composite Structures, Band 57, Heft 1-4, 2002, Seiten 289-

296.

[SHE95] Sheng, P.; Chryssolouris, G.: Theoretical Model of Laser Grooving for

Composite Materials. Journal of Composite Materials, Band 29, 1995, Seiten 96-

112

[SHE93] Sheng, P.; Chryssolouris, G.: Comparison of surface quality improvement

techniques for laser grooving of composite materials. Manufacturing Science

and Engineering. PED-Vol. 64. ASME, 1993, Seiten 795-801.

[SHY13] Shyha, I.: An Investigation into CO2 Laser Trimming of CFRP and GFRP

Composites. Procedia Engineering, Band 63, 2013, Seiten 931-937.


[SPR67] Springer, G.S.; Tsai, S.W.: Thermal Conductivities of Unidirectional Materials.

Journal of Composite Materials, Band 1, 1967, Seiten 166-173.

[STO12] Stock, J.; Zaeh, M. F.; Conrad, M.: Remote Laser Cutting of CFRP:

Improvements in the Cut Surface. Physics Procedia, Band 39, 2012, Seiten 161-

170.

[STO14] Stock, J. W.; Zaeh, M. F.; Spaeth, J. P.: Remote laser cutting of CFRP: Influence

of the edge quality on fatigue strength . Proc. SPIE 8963, High-Power Laser

Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III,

Band 8963, 2014.

[STO15] Stock, J. W.; Zaeh, M. F.: Influence of remote laser cutting on the fatigue

strength of CFRP. Tagungsband, Lasers in Manufacturing Conference, 21.-25.

Jun. 2015, München, Deutschland, Beitrag 166.

[TAG87] Tagliaferri, V.; Crivelli Visconti, I.; Di Ilio, A.: Machining of fibre reinforced

materials with laser beam: cut quality evaluation. Sixth international conference

on composite materials, Band 1, 1987, Seiten 1190-1198.

[TAG85] Tagliaferri, V.; Di Ilio, A.; Crivelli Visconti, I.: Laser cutting of fibre-reinforced

polyesters. Composites, Band 16, Nr. 4, 1985, Seiten 317-325.

[TAK15] Takahashi, K.; Tsukamoto, M.; Masuno, S.; Sato, Y.; Yoshida, H.; Tsubakimoto,

K.; Fujita, H.; Miyanaga, N.; Fujita, M.; Ogata, H.: Influence of Laser Scanning

Conditions on CFRP Processing with a Pulsed Fiber Laser. Journal of Materials

Processing Technology, Band 222, 2015, Seiten 110-121

[TRA92] Trasser, F.-J.: Laserstrahlschneiden von Verbundkunststoffen :

werkstofforientierte Prozessauslegung des Laserstrahlschneidens von aramid-

und glasfaserverstärkten Duroplasten. Düsseldorf, Verlag VDI-Verl., 1992.

[SAT14] Sato, Y.; Tsukamoto, M.; Matsuoka, F.; Takahashi, K.; Masuno, S.: Nanosecond

Laser Processing of CFRP in Ar Gas Ambience for HAZ Reduction.

Tagungsband, ICALEO, 19.-23. Okt. 2014, San Diego, Kalifornien, USA,

Beitrag 703.

[UHL14] Uhlmann, E.; Sammler, F.; Richarz, S.; Heitmüller, F.; Bilz, M.: Machining of

Carbon Fibre Reinforced Plastics. Procedia CIRP, Band 24, 2014, Seiten 19-24.

[UHL99] Uhlmann, E.; Spur, G.; Hocheng, H.; Liebelt, S.; Pan, C.T.: The extent of laser-

induced thermal damage of UD and crossply composite laminates. International

Journal of Machine Tools & Manufacture, Band 39, 1999, Seiten 639-650.

[USH12] Ushida, K.; Inami, W.; Shimamura, Y.; Kawata, Y.: Characteristic analysis of

CFRP cutting with nanosecond pulsed laser. Journal of Advanced Research in

Physics, Band 3, Nr. 1, 011211, 2012.

[VAV14] Vavilov, V.P.; Modeling and characterizing impact damage in carbon fiber

composites by thermal/infrared non-destructive testing. Composites Part B:

Engineering, Band 61, 2014, Seiten 1-10.

[VDI13] VDI-Gesellschaft Verfahrenstechnik und Chemieingenieurwesen: VDI-

Wärmeatlas. Berlin, Verlag Springer Vieweg, 2013.

[VOI06] Voisey, K.T.; Fouquet, S.; Roy, D.; Clyne, T.W.: Fibre swelling during laser

drilling of carbon fibre composites. Optics and Lasers in Engineering, Band 44,

Heft 11, 2006, Seiten 1185-1197.

[WAL15] Walter, J.; Hennigs, C.; Huse, M.; Hustedt, M.; Kaierle, S.; Overmeyer, L.:

Analysis of potentially hazardous substances emitted during laser processing of

carbon fiber reinforced plastics. Tagungsband, Lasers in Manufacturing

Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag 147.

[WAL14] Walter, J.; Hustedt, M.; Staehr, R.; Kaierle, S.; Jaeschke, P.; Suttmann, O.;

Overmeyer, L.: Laser Cutting of Carbon Fiber Reinforced Plastics –

Investigation of Hazardous Process Emissions. Physics Procedia, Band 56, 2014,

Seiten 1153-1164.


[WEB11] Weber, R.; Hafner, M.; Michalowski, A.; Graf, T.: Minimum Damage in CFRP

Laser Processing. Physics Procedia, Band 12, Teil B, 2011, Seiten 302-307.

[WEB12] Weber, R.; Freitag, C.; Kononenko, T. V.; Hafner, M.; Onuseit, V.; Berger, P.;

Graf, T.: Short-pulse laser processing of CFRP. Physics Procedia, Band 39,

2012, Seiten 137-146.

[WEB14] Weber, R.; Graf, T.; Berger, P.; Onuseit, V.; Wiedenmann, M.; Freitag, C.;

Feuer, A.: Heat accumulation during pulsed laser materials processing. Optics

express, Band 22, Nr. 9, 2014, Seiten 11312-11324.

[WIE15] Wiedenmann, M.; Freitag, C.; Haug, M.; Onuseit, V.; Weber, R.; Graf, T.:

Cutting of CFRP with short-pulsed lasers at 1 μm and 10 μm wavelength and

average powers of more than 1 kW. Tagungsband, Lasers in Manufacturing

Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag 143.

[WIS10] Wissemborski, R.; Klein, R.: Welding and Marking of Plastics with Lasers –

New Absorbers increase Possibilities for Application. Laser Technik Journal,

Band 7, Heft 5, 2010, Seiten 19-22.

[WIT14] Witten, E.; Kühnel, M.: Composites-Marktbericht 2014, unter: http://www.avk-

tv.de/files/20141008_marktbericht_gfkcfk.pdf (abgerufen am 16.01.2015).

[WOL11] Wolynski, A.; Herrmann, T.; Mucha, P.; Haloui, H.; L’huillier, J.: Laser ablation

of CFRP using picosecond laser pulses at different wavelengths from UV to IR.

Physics Procedia, Band 12, Teil B, 2011, Seiten 292-301.

[YOU08] Young, T.M.; Impact of Nd-YAG Laser Drilling on the Fatigue Characteristics

of APC-2A/AS4 Thermoplastic Composite Material. Journal of Thermoplastic

Composite Materials, Band 21, Nr. 6, 2008, Seiten 543-555.

[YU97] Yu, L.M.: Three-dimensional finite element modelling of laser cutting. Journal

of Materials Processing Technology, Band 63, Hefte 1-3, 1997, Seiten 637-639.

[ZHA98] Zhang, Z.; Modest, M. F.: Temperature-Dependent Absorptances of Ceramics

for Nd:YAG and CO2 Laser Processing Applications. Journal of Heat Transfer,

Band 120, Heft 2, 1998, Seiten 322-327.

literaturverzeichnis - springer978-3-662-56208-6/1.pdf · literaturverzeichnis 169...

Documents