listing constructional data report (cdr)ecx.images-amazon.com/images/i/b1hewey546s.pdf · report...

Listing Constructional Data Report (CDR)

Report Number GZ12090944-1 Original Issued: 19-Nov-2012 Revised: 17-Nov-2015

Standard(s)

Applicant Manufacturer

Address Address

Country CountryContact ContactPhone PhoneFAX FAX

Email Email

Electric Household Cooking and Food Serving Appliances - UL1026, Issued: Jan. 27, 2012, 6th Edition, Rev. May 29, 2014Portable Electrical Motor-Operated and Heating Appliances: Particular Requirements forPortable Electric Cooking Appliances - CSA C22.2 No. 1335.2.9, Issued: Jan. 1, 1993, R2013(See also CSA C22.2 No. 1335.1, Issued: Jan. 1, 1993, 1st Edition, R2013)

[email protected]

86-755-8621 7301

[email protected] /[email protected]

Guangdong Galanz MicrowareElectrical AppliancesManufacturing Co, Ltd

86-760-2330 5504

1.0 Reference and Address

No. 3, Xingpu Road East, HuangpuTown, ZHONGSHAN CITY,Guangdong, CHINA

86-755-8621 7260 86-760-2330 5919

3001 Deming Way, Middleton WI53562-1431, USA

Ms. Lilian Ip / Ms. He Hui Tina FangUSA China

Spectrum Brands Inc

of 34

Report No. GZ12090944-1Spectrum Brands Inc

of 34 Issued: 19-Nov-2012Revised: 17-Nov-2015

ProductBrand name

Description

Models

Model Similarity

RatingsOther Ratings

2.0 Product Description

Toaster OvenBLACK & DECKER or BLACK + DECKER or APPLICA CONSUMER PRODUCTS, INC.

NA

120V, 60Hz,1150W

The products covered by this report are toaster ovens, rated 120V, 60Hz, for household andindoor use only, provided with a non-detachable flexible power supply cord terminated in a 3-wire grounding plug.

TO1322****, TO1332****, TO1373****, TO1303**** and TO1313****, TO1356****, where '*' be0-9, A-Z or blank.

All models are identical except the Door Handle and Knobs and the following:TO1322****, TO1332**** are two knobs construction.TO1356****, TO1373****, TO1303**** and TO1313**** are three knobs construction.TO1322****, TO1332****, TO1303**** and TO1313**** share the same construction of Paneland Glass Door.Suffix '****' is referring for aesthetics (such as color, etc...) or other commercial purpose.

ED 16.3.15 (1-Jan-13) Mandatory



Photo 1 - External View of Model TO1322****


3.0 Product Photographs

Photo 2 External View of Model TO1332

1

2

3

4

5




3.0 Product Photographs






3.0 Product PhotographsPhoto 4A - External View of Model TO1356****


Photo 6 - Internal View of Model MC21B##--LR




3.0 Product PhotographsPhoto 6 - External View of all models

6

7

Photo 7 - External View of all models

8

24




3.0 Product PhotographsPhoto 8 - Internal View of Model TO1322**** 9

10

1112

Photo 9 - Internal View of Model TO1322****

13

14

15

16

1718




3.0 Product PhotographsPhoto 10 - Internal View of Model TO1373****

Photo 11 - Internal View of Model TO1373****

the cover base is optionally provided for TO1303****, TO1313****, TO1373****




3.0 Product PhotographsPhoto 12 - Internal View of Model TO1373****

19

the fiberglass sleeving for the blue wire is optionally provided

Photo 13 - Internal View of all models

Remark: when the fiberglass sleeving for the blue wire is not provided, the metal surfaces upon whichthe blue wire may bear shall be smooth, well-rounded to prevent abrasion.

20

21

22




3.0 Product PhotographsPhoto 14 - View of Accessory

23

Photo 15 - External View of Model TO1332**** with alternative handle




3.0 Product PhotographsPhoto 16 - View of alternative construction for all models

Remark: change the sleeving from door spring to lower heater terminal

Photo 17 - View of alternative construction for all models

Remark: add a cable tie for power cord and internal wires




3.0 Product PhotographsPhoto 18 - View of alternative Handle and Knob construction for model TO1313****




Ph

oto

#

Item

no.1Name

Manufacturer/

trademark2 Type / model2Technical data and securementmeans

Mark(s) ofconformity

3

2 1Power SupplyCord Set

Various HPN

18AWG/3C, rated 300V, 105,VW-1, the cord length from cordentry to plug face should bebetween 0.6m and 2.1m, flexiblecord integrally molded on a 3-wiregrounding plug type 5-15P.

cULus

2 2 Panel Various Various

SPCD or SUS430 material.Measured 0.5mm or 0.4mm thick.Overall dimension 390mm x184mm x 22mm.

NR

2 3Glass DoorAssembly

Various Various It consists of the following items: NR

2 3a Door Handle Various Various

PBT or PA6 material. Rated atleast HB, min. 1.0mm thick.Secured with Door Clamp byscrews.

cURus

2 3bUpper & LowerDoor Clamp

Various VariousSPCC material. Measured 0.6mmor 0.5mm thick.

NR

2 3c Glass Door Various Various

Toughened glass. Measured thethickness 4mm, overall dimension284mm x 162.7mm forTO1373***, and 284mm x 149mmfor TO1322***, TO1332***,TO1303***, TO1313***.

NR

2 4 Knobs Various Various

PBT or PA6 material. Rated atleast HB, min. 2.0mm thick.Tightly snapped at stem ofThermostat or Timer or Function-select Switch.

cURus

2 5 Top Enclosure Various Various

SPCC or SUS430 material.Measured 0.4mm thick. Measuredoverall dimension 393mm(L) x234mm(W) x 185.5mm(H). Fixedon the back enclosure and bottomenclosure by screws.

NR

6 6 Spacer

CHEVRONPHILLIPSCHEMICAL CO LP

BR111

PPS material. Rated V-0, 220.Min. 1.5mm thick, measured15.3mm O.D x 12mm long, fixedto black enclosure by riveting.

URus

6 7 Cord BushingKAI SUH SUHENTERPRISE COLTD

SR-F51Rated 75. Snapped into blackenclosure tightly and serviced asstrain relief.

URus

7 8 Foot Various Various

PP material. Rated at least HB,Min. 115. Min. 2mm thick. Fourprovided, measured 45mm (L) x18mm (W) x 25mm (H). With fourrubber mats snapped in it,secured on bottom enclosure byscrews.

cURus

4.0 Critical Components




Ph

oto

#

Item

no.1Name

Manufacturer/



3


Various Various

Galvanized steel. 0.4mm thick, itconsists of back enclosure,bottom enclosure and U innerplate, fixed together with eachother by screws. Measured overalldimensions of 274mm(L) x225mm(W) x 175mm(H).

NR

Various Various SPCC material. 0.35mm thick. NR

8 10Close-endConnector

Various VariousRated min. 300V, 105. Forwiring connection between powersupply cord and internal wire.

cURus

8 11 Cable Tie Various Various PA material. Rated at least 105. cURus

8 12 Internal Wire Various 3122

Rated 200, 300V. Min. 18 AWGfor the connecting to Timer, PowerSupply Cord, and the connectionbetween Thermostat andFunction-select Switch. Min. 22AWG for the connecting toIndicator Light. Min. 20 AWG forthe others internationalconnection.

cURus

9 13IndicatorAssembly

Various Various It consists of the following items: NR

FORMOSAIDEMITSUPETROCHEMICAL CORP

#2200+(f2)

PC material. Rated V-2, HWI=3,HAI=0, 125, minimum 1.5 mmthick. Secured on the controlpanel.

cURus

MITSUBISHIENGINEERING-PLASTICS CORP

7022(l)

Only for TO1322***, TO1332***.PC material. Rated V-2, HWI=2,HAI=0, 115, minimum 1.5 mmthick. Secured on the controlpanel.

cURus

9 13bFiberglassSleeving

Various VariousEnclosed the indicator leads and aresistor covered by HeatShrinkable Tube.

cURus

9 13cHeat ShrinkableTube

Various VariousRated 125, 600V, VW-1.Employed to cover indicator leadsand a resistor.

cURus

11 13dCover Base(optional)

LG CHEM LTD H1315

Only for TO1303***, TO1313***,TO1373***. PP, rated HB, 110,minimum 1.5 mm thick. Fixed withthe Indicator cover.

cURus

FOSHAN CITYCHANCHENGHUALILAIELECTRICAL COLTD.

FZ31-9Rated 125V, 60Hz, 13A, 125,endurance 6K cycles. Secured onthe control panel by screws.

cURus

FOSHANSHUNDEXINGTANYUANFENGHARDWAREELECTRICALAPPLIANCES COLTD

YX1Rated 125 V, 50/60 Hz, 20 A, 125. 6000 cycles endurance.Others same as above.

cURus

9 13a Indicator Cover

Metal Chamber98

9 14Function-selectSwitch




Ph

oto

#

Item

no.1Name

Manufacturer/



3


LINTONELECTRICALLTD

IT-168

Rated 125V, 60Hz, 12A,maximum operating temperature176 for TO1322*** andTO1332***, 192 for TO1373***,181 for TO1303*** andTO1313***, subjected to 100,000cycles endurance test.

cURus

SHENZHENFOREVERGREATTECHNOLOGYCO LTD

XWX-WK-03

Rated 125V, 60Hz, 15A,maximum operating temperature176 for TO1322*** andTO1332***, 192 for TO1373***,181 for TO1303*** andTO1313***, subjected to 100,000cycles endurance test.

cURus

HANGZHOUWESTLAKETIMER SWITCHFACTORY.

DKJ/1-30

Rated 125V, 15A, 120,endurance 6K cycles, maximumtime setting 30 minutes. Securedon the control panel by screws.

cURus

JIANGSUSHALONGMECHANICAL &ELECTRICALTECHNOLOGYCO LTD

SL-30BRated 120V, 15A, 120, otherssame as above.

cURus

HANGZHOUTIANMA TIME-CONTROL SI-TECH CO LTD

DKJ-Y-30Rated 125V, 15A, 120, otherssame as above.

cURus

HANGZHOUGUANZUANELECTRICALAPPLIANCE COLTD

DKJ/1-1 thru240

Rated 125V, 15A, 125, otherssame as above.

cURus

9 17 Terminal SheathWYNCA TINYOSILICONE COLTD

TY26E9

SIR. White color, rated V-0, 150. Two provided for enclosingQuick Connector to Function-select Switch.

cURus

9 18 Quick ConnectorSHUN SHENGTERMINAL MFGLTD

751A-BSFive provided. For the connectionto terminals of Thermostat andFunction-select Switch.

URus

12 19 Spring Various Various

65Mn. Measured Ø0.9mm for thewire. Measured overall 32mm longfor the idle stage and 8mm outerdiameter.

NR

13 20Quartz ProtectingCover

Various VariousTwo provided. SA1C material.0.4mm or 0.35mm thick.

NR

13 21Upper QuartzElement

GALANZGA (redmarking 600Woutput)

Rated 120Vac, 60Hz, 600W. Itconsists of resistance wire, 0.75mm diameter, resistance21.2~23.4 Ω, encased in a 1mmthick quartz glass sheath, overall8~9mm OD. Supported by twoCeramic Insulating Terminal.Refer to Illustration no.4 for detail.

NR

9 15 Thermostat

9 16 Timer




Ph

oto

#

Item

no.1Name

Manufacturer/



3


13 22Lower QuartzElement

GALANZGA (bluemarking 550 Woutput)

Rated 120Vac, 60Hz, 550W. Itconsists of resistance wire,0.65~0.7mm diameter, resistance25.1~27.3Ω, encased in a 1mmthick quartz glass sheath, overall7.5~8.5mm OD. Supported by twoCeramic Insulating Terminal.Refer to Illustration no.4 for detail.

NR

14 23 Attachments Various VariousIt consisted of a Crumb Tray, aFood Tray, and a Wire Rack.

NR

7 24 Marking Label Various Various

Painting, silk screen, engrave,laser or molding on the outersurface of Bottom Enclosure.Refer to Illustration 1 for details.

cURus

3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted andonly visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section5.0 for details.

NOTES:

2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)of conformity" can be used.

1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.




No CEC Unlisted Components are used in this report.

5.0 Critical Unlisted CEC Components




2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and displaylamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or othermounting format that prevents turning of the component.

3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or theequivalent.

4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a metal or non-metallic enclosure constructed with no openings other than those specifically described in Sections 4 and 5.

5. Grounding - All exposed dead-metal parts and all dead-metal parts within the enclosure that are exposed areconnected to the grounding lead of the power supply cord .

6. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminatingin soldered connections are made mechanically secure prior to soldering. Recognized Componentseparable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other typesspecifically described in the text of this report are also acceptable as internal wiring terminals. At pointswhere internal wiring passes through metal walls or partitions, the wiring insulation is protected againstabrasion or damage by plastic bushings or grommets.

7. Markings - The product is marked as follows:- manufacturer’s name, trade name- model number- date of manufacture- electrical ratings (volts, power & frequency)- refer to Illustration 1 - Marking for details.

8. Carton Marking - The following are required:-The “HOUSEHOLD USE ONLY” or “HOUSEHOLD TYPE” must be located on at least one outside surface.-Appear in lettering not less than the height as specified, The dimension of the carton panel (mm) Minimum height of lettering (mm) 0~152 3.2 152~254 4.8 more than 254 6.4

9. Cautionary Markings - The following are required:- Refer to illustration 1 for details.

Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of aproduct that has a direct bearing on the product’s conformance to applicable requirements of the productstandard.Construction Details - For specific construction details, reference should be made to the photographs anddescriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to thespecific construction details described in this Report, the following general requirements also apply.

Recognized Component - A component part, which has been previously evaluated by an accredited certificationbody with restrictions and must be evaluated as part of the basic product considering the restrictions as specifiedby the Conditions of Acceptability.

6.0 Critical Features

Unlisted Component - A part that has not been previously evaluated to the appropriate designated componentstandard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing orcomponent recognition.

1. Spacing - In primary circuits, min. 1.6 mm spacing is maintained through air or over surfaces of insulatingmaterial between current-carrying parts of opposite polarity and between bare live parts and other npn-current-carring conductive parts other than the enclosure, and minimum 1.6 mm spacing between current-carrying parts and conductive enclosure.

Listed Component - A component part, which has been previously Listed or Certified by an accreditedCertification Organization with no restrictions and is used in the intended application within its ratings.




6.0 Critical Features10. Installation, Operating and Safety Instructions - Instructions for installation and use of this product are

provided by the manufacturer.- The “IMPORTANT SAFEGUARDS” and “SAVE THESE INSTRUCTIONS” was min. 4.8 mm in height.- The letter of contents was: for upper case letter, 2.11 mm high min., for lower case letter, 1.6 mm in heightmin.- Refer to Instruction illustration 2 for details




Illustration 1 - Marking Label7.0 Illustrations

TO1332**** TO1332****

TO1332**** TO1332****

TO1322**** TO1322****

TO1322**** TO1322****

Notes:(1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows:Y = Last digit of the yearWW = Week of the yearExample:523 = 23rd week of year 2005(2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUSPROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4mm) in height.(3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the letteringshall be not less than 1.5 mm in height.(4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028"shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm.(5). Models: TO1322****, TO1332****, where '*' be 0-9, A-Z or blank.(6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door.

TO1332****TO1332****TO1322**** TO1322****




7.0 IllustrationsIllustration 1A - Marking Label

TO1303**** TO1303****TO1373**** TO1373****

TO1373**** TO1373**** TO1303**** TO1303****

Notes:(1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows:Y = Last digit of the yearWW = Week of the yearExample:523 = 23rd week of year 2005(2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUSPROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4mm) in height.(3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the letteringshall be not less than 1.5 mm in height.(4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028"shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm.(5). Models: TO1373****, TO1303****, where '*' be 0-9, A-Z or blank.(6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door.(7). Alternative Models: TO1356****, where '*' be 0-9, A-Z or blank.

TO1303****TO1303****TO1373****TO1373****




7.0 IllustrationsIllustration 1B - Marking Label

TO1313**** TO1313****

TO1313**** TO1313****

Notes:(1). The date code is die stamped on the metal blades of the AC attachment plug. The date code is as follows:Y = Last digit of the yearWW = Week of the yearExample:523 = 23rd week of year 2005(2). “DO NOT IMMERSE IN WATER ”, “HOUSEHOLD USE ONLY”, "TO ENSURE CONTINUOUSPROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETONLY", "To prevent electric shock, unplug before cleaning" and their French shall be not less than 3/32 inch (2.4mm) in height.(3). “CONFORMS TO UL STD. 1026 ”, “CERTIFIED TO CSA STD. C22.2 NO.1335.1 & 1335.2.9”, the letteringshall be not less than 1.5 mm in height.(4). The ETL logo shall not be less than 8.0 mm in width and 8.0 mm in height, and the “ US”, "C", "3171028"shall be not less than 2 mm in height. "Intertek" shall be not less than 3.0 mm.(5). Models: TO1313****, where '*' be 0-9, A-Z or blank.(6). Alternative brand name "BLACK & DECKER" or "BLACK + DECKER", will be marked on the Glass door.

TO1313****TO1313****




7.0 IllustrationsIllustration 2 - Instruction Manual




7.0 IllustrationsIllustration 2A - Instruction Manual




7.0 IllustrationsIllustration 3 - Circuit Diagram




7.0 IllustrationsIllustration 4 - Drawing of Heater Element

Upper Quartz Element:

Lower Quartz Element:Lower Quartz Element:




Evaluation Period Project No. GZ12090944

Sample Rec. Date Sep. 21, 2012 Condition Prototype Sample ID.S12090944-001~009

Test Location

Test Procedure

UL1026 6thEdition, Rev.Jan. 27, 2012clause

CSA C22.2 No.1335.1-93, Rev.2008 and CSAC22.2 No.1335.2.9-93,Rev. 2008clause

UL 746C, 6thEdition, Rev. Mar.7, 2012clause

8 20.1.2 /10 25.15.1 /31 27 /37 10 /38 13 /39 / /41 11 /

43 15.3.3 /44 16 /47 / /50 / /52 21.2 /

53 / /55 19.4 /

60

18.2.104,24.15.2

/

/ / 31

/ / 56/ / 61

/19.101.4-19.101.7

/

Stability Test

8.0 Test Summary

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch (Address: Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City,GETDD, Guangzhou, China 510663).

Testing Lab

Test Description

Sep. 21, 2012~Nov. 19, 2012

Determination of the result includes consideration of measurement uncertainty from the test equipment andmethods. The product was tested as indicated below with results in conformance to the relevant test criteria.

The following tests were performed:

Strain Relief Test

Tests for Insulation Resistance and Leakage Currentas a Result of MoistureDielectric Voltage Withstand TestPush Back Relief Test

Metal Enclosure Impact TestGlass Window or Door Impact Test

Non-Metal Enclosure Fasteners Test

Abnormal Operation Test

Leakage Current Test

Polymeric Enclosure Impact Test

Component Switch and Control Device

Strain Relief Test after Mold Stress-Relief DistortionTest

Grounding TestPower Input Test

Operational TestNormal Temperature Test

Mold Stress-Relief Distortion Test

Burnout bread test




8.0 Test SummaryEvaluation Period Project No. 140106067GZUSample Rec. Date Jan. 6, 2014 Condition Prototype Sample ID. S140106067-001

Test Location

Test Procedure

UL1026 6thEdition, Rev.Jan. 27, 2012clause

CSA C22.2 No.1335.1-93, Rev.2008 and CSAC22.2 No.1335.2.9-93,Rev. 2008clause

/

41 11 /52 21.2 /

Evaluation Period Project No. 140701103GZU

Completed by: Reviewed by:Title: Title:

Signature: Signature:

Test Description

Jul. 1, 2014 ~ Jul. 14, 2014

Jan. 6, 2014 ~ Jan. 17, 2014

Team Leader

Metal Enclosure Impact Test

Intertek Testing Services Shenzhen Ltd. Guangzhou Branch (Address: Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou Science City,GETDD, Guangzhou, China 510663).

Testing Lab

Determination of the result includes consideration of measurement uncertainty from the test equipment andmethods. The product was tested as indicated below with results in conformance to the relevant test criteria.

Due to the previous testing performed under Intertek Report GZ12090944-1, only the following testing wasperformed:

Due to the previous testing performed and reported above, no additional testing was necessary for UL1026,Issued: Jan. 27, 2012, 6th Edition, Rev. May 29, 2014 and CSA C22.2 No. 1335.2.9, Issued: Jan. 1, 1993,R2013 (See also CSA C22.2 No. 1335.1, Issued: Jan. 1, 1993, 1st Edition, R2013).

Signature on file Signature on file

8.1 Signatures

A representative sample of the product covered by this report has been evaluated and found to comply withthe applicable requirements of the standards indicated in Section 1.0.

Sidney Guo CJ Zhong

Normal Temperature Test

Engineer




BASIC LISTEE

Address

CountryProduct

MULTIPLE LISTEE 1AddressCountry

Brand Name

MANUFACTURERAddressCountry

BASIC LISTEE MODELS


Brand Name

MANUFACTURER

Address

Country

BASIC LISTEE MODELS


Brand Name

MANUFACTURER

Address

Country

BASIC LISTEE MODELSMULTIPLE LISTEE MODELS

None.

MULTIPLE LISTEE MODELS

USA

MULTIPLE LISTEE MODELS

None.

9.0 Correlation Page For Multiple ListingsThe following products, which are identical to those identified in this report except for model number and Listeename, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.

Spectrum Brands Inc

3001 Deming Way, Middleton WI 53562-1431, USA

None.

Toaster Oven




10.0 General InformationThe Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance withthe requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorizationprior to using alternate parts, components or materials.

COMPONENTSComponents used shall be those itemized in this Intertek report covering the product, including any amendmentsand/or revisions.

LISTING MARKThe ETL Listing mark applied to the products shall either be separable in form, such as labels purchased fromIntertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark issubject to the control of Intertek.

The mark must include the following four items:

1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU"2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate)3) a control number issued by Intertek4) a product descriptor that identifies the standards used for certification. Example:

For US standards, the words, “Conforms to” shall appear with the standard number along with the word, “Standard” or “Std.” Example: “Conforms to UL Std. XX.”

For Canadian standards, the words “Certified to CSA Standard CXX No. XX.” shall be used, or abbreviated, “Cert. to CSA Std. CXX No. XX.”

Can be used together when both standards are used.

Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use.The facsimile need not have a control number. A control number will be issued after signed CertificationAgreements have been received by the Follow-up Services office, approval of the facsimile of yourproposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factoryassessment in your facility.

MANUFACTURING AND PRODUCTION TESTSManufacturing and Production Tests shall be performed as required in this Report.

FOLLOW‑UP SERVICEPeriodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shallbe scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to thefollowing:

1. Conformance of the manufactured product to the descriptions in this Report.2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.3. Manufacturing changes.4. Performance of specified Manufacturing and Production Tests.

In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, theApplicant shall take one or more of the following actions:

1. Correct the non-conformance.2. Remove the ETL Mark from non-conforming product.3. Contact the issuing product safety evaluation center for instructions.




10.1 Evaluation of Unlisted Components

Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writingwhen these components must be selected and sent to the CEC for re-evaluation

Ship the samples to:Intertek Testing Services Shenzhen Limited Guangzhou BranchETL Component Evaluation CenterBlock E, No. 7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou ScienceCity

CETDD Guangzhou, China.Attn: Ms. Joey Kuang

Sample Disposition: Due to the destructive nature of the testing, all samples will bediscarded at the conclusion of testing unless, the manufacturer specifically requests thereturn of the samples. The request for return must accompany the initial component

shipment.

Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,Intertek may require these components to be tested and/or evaluated at least once annually, more often forcertain components, as part of the independent certification process. The Unlisted Components in Section 5.0require testing and/or evaluation as indicated.




Product Test Voltage Test TimeAll products covered by this Report. 1000V 60 s

or1200V 1 s

11.0 Manufacturing and Production TestsThe manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:

Required Tests

Products Requiring Grounding Continuity Test:All products covered by this Report.

Each product listed below shall be subjected to a test to determine that there is continuity between accessibledead-metal parts of the product and the grounding pin or blade of the attachment plug.

If all accessible dead metal is connected, only a single test need be performed. A visual or audible device(ohmmeter, buzzer, etc.) may be used to indicate grounding continuity.

Dielectric Voltage Withstand TestGrounding Continuity Test

If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by either:1 - a voltmeter in the primary circuit;2 - a selector switch marked to indicate the test potential; or3 - a marking in a readily visible location to indicate the test potential for test equipment having a single testpotential output.In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test potentialis present at the test equipment output. All test equipment shall be maintained in current calibration.

The test shall be conducted on products, which are fully assembled. Prior to applying the test potential, allswitches, contractors, relays, etc., should be closed so that all primary circuits are energized by the test potential.If all primary circuits cannot be tested at one time, then separate applications of the test potential shall be made.

The test voltage specified below shall be applied between primary circuits and accessible dead-metal parts. Thetest voltage may be gradually increased to the specified value but must be maintained at the specified value forone second or one minute as required.

Test Equipment

11.1 Dielectric Voltage Withstand TestMethod

One hundred percent of production of the products covered by this Report shall be subjected to a routineproduction line dielectric withstand test.

The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate theapplied test potential, and an audible and/or visual indicator of dielectric breakdown.The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test potentialif the rated output of the test equipment is less than 500VA.

Products Requiring Dielectric Voltage Withstand Test:

11.2 Grounding Continuity TestMethod




Date/ Project Handler/Proj # Site ID Reviewer

21-Jan-2013 Richard Liang 3.0Photo

2Corrected the photo for External View of Model TO1332***.

130104013GZUPhoto16-17

Added photo for view of alternative construction for allmodels.

Benson Li

17-Jan-2014 Richard Liang 1.0 --Changed the manufacturer name from "Zhongshan GalanzHousehold Appliances Co., Ltd." to "Guangdong GalanzMicroware Electrical Appliances Manufacturing Co, Ltd".

140106067GZU 3.0Photo11, 12

Added remark for photo 11, 12.

CJ Zhong 4.0 2Added alternative 0.4mm thick SPCD or SUS430 material forPanel.

3bAdded alternative 0.5mm thick SPCC material for Upper &Lower Door Clamp.

9Added alternative 0.35mm thick SPCC material for MetalChamber.

13dAdded an optionally provided Cover Base for TO1303***,TO1313***, TO1373***.

20Added alternative 0.35mm thick SA1C material for QuartzProtecting Cover.

8.0 -- Added evaluation information.

14-Jul-2014 Sidney Guo 1.0 --

Updated the standard from "UL1026 6th Edition, Rev. Jan.27, 2012" to "UL1026, Issued: Jan. 27, 2012, 6th Edition,Rev. May 29, 2014", updated the standard from "CSA C22.2No. 1335.2.9-93, Rev. 2008 (See also CSA-C22.2 No.1335.1-93, Rev. 2008)" to "CSA C22.2 No. 1335.2.9, Issued:Jan. 1, 1993, R2013 (See also CSA C22.2 No. 1335.1,Issued: Jan. 1, 1993, 1st Edition, R2013)".

140701103GZU CJ ZhongFull

report--

Revised the Applicant from "Applica Consumer Products Inc"to "Spectrum Brands Inc".

1.0, 9.0 --Updated the Applicant address to "3001 Deming Way,Middleton WI 53562-1431, USA".

1.0 -- Updated the Applicant contact information.

2.0 --

Updated the brand name from "Black & Decker" to "BLACK& DECKER" for all models.Added brand name BLACK + DECKER for all models.Added brand name APPLICA CONSUMER PRODUCTS,INC. for all models.

--Revised the models suffix from “***” to "****", revised thesuffix description for all models.

3.0All

photos

Revised the models suffix from “***” to "****".

4.0 14 Added an alternative Function-select Switch, model YX1.

7.0 Ill. 1

Updated the brand name from "Black & Decker" to "BLACK& DECKER" on marking labels for all models.Added marking labels with brand name BLACK + DECKERfor all models.

Ill. 1Updated the models suffix from “***” to "****" on the markinglabels, revised the suffix description for all models.

8.0 -- Added the test summary for this evaluation.8.1 -- Revised with new signatures.

13-Feb-2015 Spark Li 2.0 --Added the models TO1356****, where '*' be 0-9, A-Z orblank.

150211022GZU Harry Song 3.0Photo

4AAdded the photo for TO1356****.

7.0 Ill. 1A Added the note item 7.

12.0 Revision SummaryThe following changes are in compliance with the declaration of Section 8.1:

Section Item Description of Change


listing constructional data report (cdr)ecx.images-amazon.com/images/i/b1hewey546s.pdf · report...

Documents