lista industrial workbenches - multi-industriel · feature: heavy-duty welded leg one-piece leg...

Lista Industrial Workbenches

Rugged Lista industrial work-

benches stand up to the demands

of the harshest environments. At

General Hydrogen, a Lista bench

with galvanized steel worksurface

is used as a welding station. The

double width cabinet pedestal

allows the storage of welding

rods in adjacent drawers.

Multi-Industriel A.D. Ltd. [email protected] Toll-free : 1-800-363-4463 Tel : 514-875-6604 Fax : 514-875-6664

47

Lista Industrial WorkbenchesIndustrial Workbench Features 48

Industrial Workbench Examples 50

Industrial Workbench Easy-Order Combinations 52

Industrial Workbench Easy-Order Mobile Combinations 54

Industrial Workbench Worksurfaces 56

Industrial Workbench Under-Worksurface Legs and Accessories 57

Industrial Workbench Above-Worksurface Accessories 58

How to Order Industrial Workbench Custom Configurations 59

R U G G E D , D U R A B L E W O R K S P A C E S O L U T I O N S

T O S U I T A N Y E N V I R O N M E N T


48

Lista Industrial Workbench Features

Rugged. Durable. Built to han-

dle the harshest work environ-

ments. Lista’s industrial

workbenches feature flexible

Feature: Wide choice of above-worksurface accessoriesCreate task-specific configurations

Benefit: Greater productivity and efficiency

Feature: Variety of worksurfacesDurable tops come in a variety of sizes

Benefit: Worksurface always appropriate to application

Feature: Removable lock coreLocks can be replaced in the field

Benefit: Greater security, easy replacement

Feature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothing

protrudes. Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomics

Feature: Customizable drawer compartmentsA wide variety of drawer accessories for maximum

partitioning flexibilityBenefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and stylesWide variety of workbench support options

Benefit: Customized to your needs

Feature: Heavy-duty welded legOne-piece leg with bottom hole for leveling glides

Benefit: Provides support for heavy-duty applications

Feature: MobilityCabinets and legs are available

with castersBenefit: Work areas can easily be reconfigured,

components can be moved toand from the work site

standard components and

can be cost-effectively custom

configured to meet the specific

needs of your application.


49Multi-Industriel A.D. Ltd. [email protected] Toll-free : 1-800-363-4463 Tel : 514-875-6604 Fax : 514-875-6664

50

Lista Industrial Workbenches Make Any Workspace Work

Lista’s rugged industrial work-

bench systems and their large

variety of accessories can be

configured to suit almost any

application or working environ-

ment.

Sets of workbenches make maxi-

mum use of the available space in

this machine tool room at the

Mercedes-Benz Training Center.

Mobile industrial workbenches

can be moved right to the point

of use, even in a crowded, busy

machine shop.

At Landmark Aviation, corporate jets are

repaired and maintained at durable Lista work-

benches with the Nexus Accessory System.

Cabinet pedestals with plenty of drawers

provide storage for parts and tools, and the

companion mobile cabinet allows additional

storage with the convenience of mobility.


51

Heavy-duty Lista industrial work-

benches combine with Lista

stacked cabinets to create an

organized, efficient workspace

that stands up to the challenges

of this marine emergency

response company.

A wide range of Lista work-

benches brings Toyota Racing

Development up to speed in a

host of different departments.

An industrial workbench pro-

vides a rock-solid platform for

this inspection station.

Sturdy industrial workbenches at

the Con Edison Corporate

Learning Center have rugged gal-

vanized steel worksurfaces for

extra durability. Specialized test-

ing equipment and heavy-duty

components on the work surfaces

enhance this durable, ergonomic

workspace.


52

Easy-Order Industrial Workbenches

PART NO. INCLUDESWB1003-�� 12" adjustable riser shelf

with back stopworkbench back stop and

end stops

Easy-Order workbenches include MPWidth (22 3⁄16" wide) cabinet pedestals(see page 67 for description). Customer-specified cabinet pedestals (shown ingray) must be ordered separately – forEasy-Order cabinet pedestals, seepages 62-63 for Narrow Width cabi-nets and pages 68-69 for MP Widthcabinets.

How to order an Easy-OrderIndustrial Workbench

1. Select Easy-Order workbench configuration.

2. � Select worksurface style. Seepage 56 for descriptions.LTS = Lista TopGLS = Galvanized steelPLS = Plastic laminateBTS = Butcher block

All worksurfaces have a stan-dard square edge and are 30"deep.

3. � Select worksurface size.4830 = 48" long x 30" deep6030 = 60" long x 30" deep7230 = 72" long x 30" deep

4. �� Select paint color. For colorchart, see back cover or below.

EXAMPLE: to order a WB1201 work-bench with a 72" long plastic laminateworksurface and Bright Blue paint, thepart number would be WB1201-PLS7230BB.

5. Select cabinet pedestals (forWB03xx and WB06xx configura-tions). For Easy-Order cabinetpedestals, see pages 62-63 forNarrow Width cabinets and pages68-69 for MP Width cabinets.

EXAMPLE (CUSTOMER-SPECIFIEDCABINETS): to order a WB0300 work-bench with a 72" long plastic laminateworksurface, and an MP0750-0601NAcabinet pedestal with Bright Bluepaint, the workbench part numberwould be WB0300-PLS7230BB, andthe cabinet part number would be MP0750-0601NA-NBRGBB.

PART NO.WB1000-��

Workbenches with 2 ListaLegs

Workbenches with 2 ListaLegs and 1 Drawer

Workbenches with 1 ListaLeg and 1 Cabinet

PART NO. INCLUDESWB1001-�� back stop and end stops

PART NO. INCLUDESWB1002-�� stationary riser shelf with

back stop + full rear panelworkbench end stops



end stops







end stops





Overall bench height including work-surface is 35 1⁄4". Includes:

• 2 Lista Legs (legs are 33 1⁄2" high)• 1 stringer

Overall bench height including work -surface is 35 1⁄4". Includes:

• 2 Lista Legs (legs are 33 1⁄2" high)• 1 stringer• 1 WBHC150-1 hanging cabinet

Overall bench height including work -surface is 35 1⁄4". Includes:

• 1 Lista Leg (leg is 33 1⁄2" high)• 1 stringer• 1 MP0600-0402NA-F6RG cabinet

� BE (Beige paint) � BB (Bright Blue paint) � BK (Black paint) � CB (Classic Blue paint) � GR (Dark Gray paint)


53

Workbenches with 1 Legand 1 Customer-SpecifiedCabinet

Workbenches with 2 Cabinets Workbenches with 2 Customer-SpecifiedCabinets



end stops







end stops






w/back stopworkbench back stop and

end stops







end stops






• 1 Lista Leg (leg is 33 1⁄2" high)• 1 stringer• cabinet pedestal chosen by customer


• 1 MP0600-0402NA-F6KA cabinet* • 1 MP0600-0202NA-F6KA cabinet**includes keyed-alike locks


• 1 MP0600-0501NA-F6KA cabinet* • 1 MP0600-0204D-F6KA cabinet**includes keyed-alike locks


• 2 cabinet pedestals chosen by customer

� GG (Green paint) � LG (Light Gray paint) � NR (Red paint) � SN (Sand paint) �� FW (White paint)


54

Easy-Order mobile workbenchesinclude MP Width (22 3⁄16" wide) cabi-net pedestal (see page 68 for descrip-tion). They include 2 fixed and 2 swivel6" x 2" casters with wheel locks.

How to order an Easy-OrderIndustrial Mobile Workbench

1. Select Easy-Order workbench configuration.

2. � Select worksurface style. See page 56 for descriptions.LTS = Lista TopGLS = Galvanized steel PLS = Plastic laminate BTS = Butcher block

All worksurfaces have a stan-dard square edge and are 30"deep.



EXAMPLE: to order a WB2201 work-bench with a 72" long plastic laminateworksurface and Bright Blue paint, thepart number would be WB2201-PLS7230BB.

Easy-Order Industrial Mobile Workbenches





Overall bench height including worksur-face is 37 1⁄4". Includes:

• 1 Lista Mobile Leg (leg is 35 1⁄2"high)

• 1 stringer• 1 MP0600-0402NA cabinet









Mobile Workbenches with 2 Lista Mobile Legs

Mobile Work benches with 2 Mobile Legs and 1 Drawer

Mobile Work benches with 1 Mobile Leg and 1 Cabinet


• 2 Lista Mobile Legs (legs are 33 1⁄2"high)

• 1 stringer


• 2 Lista Mobile Legs (legs are 33 1⁄2"high)

• 1 stringer• 1 WBHC150-1 hanging cabinet




end stops



end stops



end stops


55















This corporate aircraft operator wanted to upgrade

its maintenance facility to match the quality of its air-

craft. Several mobile benches, including this mobile

inspection station, are used in the company’s hangar

and support shop.

The mobile workbench used at this electronic repair

facility brings repair tools and parts right to the

point of use, without sacrificing durability and

drawer storage space. The companion mobile stor-

age cabinet (designed to be stored between the

workbench cabinet pedestals) adds to the flexibility

of this arrangement. For information on ordering

mobile workbenches with two cabinet pedestals,

contact your Lista distributor.

Mobile Work benches with 1 Mobile Leg and 1 Cabinet




end stops



end stops


56

Butcher BlockSatin finish 1 3⁄4" thick hardwood.Available in standard square edge(shown above) or bullnose front edge.To order a bullnose edge, add “BN” tothe end of the part number.

PART NO. LENGTH24" deepBTOP-4824 48" BTOP-6024 60" BTOP-7224 72" BTOP-8424 84" BTOP-9024 90" BTOP-9624 96" 30" deepBTOP-48 48" BTOP-60 60" BTOP-72 72" BTOP-84 84" BTOP-90 90" BTOP-96 96" 36" deepBTOP-4836 48" BTOP-6036 60" BTOP-7236 72" BTOP-8436 84" BTOP-9036 90"BTOP-9636 96"

Lista Top1 3⁄4" thick worksurface with woodcore and 3⁄8" thick sanded oil-resistantpressed wood, top and bottom.

PART NO. LENGTH30" deepLTOP-48 48" LTOP-60 60" LTOP-72 72" LTOP-84* 84" LTOP-90* 90" LTOP-96* 96" 36" deepLTOP-4836 48" LTOP-6036 60" LTOP-7236 72" LTOP-8436* 84" LTOP-9036* 90" LTOP-9636* 96"

*requires additional support (third leg or hatsection stiffener)

Galvanized Steel OverWoodLista Top with additional heavy-gaugegalvanized steel cover that is fitted overtop and sides of wood core, 1 13⁄16"thick.

PART NO. LENGTH30" deepLSTOP-48 48" LSTOP-60 60" LSTOP-72 72"LSTOP-84 84" LSTOP-90 90" LSTOP-96 96" 36" deepLSTOP-4836 48" LSTOP-6036 60" LSTOP-7236 72" LSTOP-8436 84" LSTOP-9036 90" LSTOP-9636 96"

Stainless Steel Over WoodWorksurface is constructed of durable,heavy gauge stainless steel, fitted overtop and sides of wood core, 1 13⁄16"thick.

PART NO. LENGTH30" deepLSSTOP-48 48" LSSTOP-60 60" LSSTOP-72 72"LSSTOP-84 84"LSSTOP-90 90"LSSTOP-96 96"36" deepLSSTOP-48X36 48" LSSTOP-60X36 60"LSSTOP-72X36 72"LSSTOP-84X36 84" LSSTOP-90X36 90" LSSTOP-96X36 96"

Lista worksurfaces are all

easy to maintain, rugged, and

durable.

Worksurfaces come in 48",

60", 72", 84", 90" and 96"

lengths, and are 24", 30" or 36"

deep, depending on worksur-

face. Other sizes are available,

and certain worksurfaces are

available with a bullnose front

edge.

Plastic LaminateParticle board core with plastic lami-nated top and sides. 1 9⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able in standard square edge or bullnose frontedge (shown above). To order a bull-nose edge, add “BN” to the end of thepart number.

PART NO. LENGTH24" deepPTOP-4824 48" PTOP-6024 60" PTOP-7224 72" PTOP-8424* 84" PTOP-9024* 90" PTOP-9624* 96" 30" deepPTOP-48 48" PTOP-60 60" PTOP-72 72"PTOP-84* 84" PTOP-90* 90" PTOP-96* 96" 36" deepPTOP-4836 48" PTOP-6036 60" PTOP-7236 72" PTOP-8436* 84"PTOP-9036* 90" PTOP-9636* 96"


Industrial Workbench Worksurfaces


57

Industrial Workbench Under-Worksurface Accessories

Lista LegsEach welded one-piece leg assembly is 2 1⁄ 2" wide heavygauge steel. Each foothas a bottom hole forleveling glide (included)or anchoring. Height shown includesleveling glide.

PART NO. WORKSURFACE DEPTH27 1⁄2" (700mm) highWBLL27.5X22.5 24" (610mm)WBLL27.5X28.5 30" (762mm)WBLL27.5X34.5 36" (915mm)29 1⁄2" (750mm) highWBLL29.5X22.5 24" (610mm)WBLL29.5X28.5 30" (762mm)WBLL29.5X34.5 36" (915mm)31 1⁄2" (800mm) highWBLL31.5X22.5 24" (610mm)WBLL31.5X28.5 30" (762mm)WBLL31.5X34.5 36" (915mm)33 1⁄2" (850mm) highWBLL33.5X22.5 24" (610mm)WBLL33.5X28.5 30" (762mm)WBLL33.5X34.5 36" (915mm)35 1⁄2" (900mm) highWBLL35.5X22.5 24" (610mm)WBLL35.5X28.5 30" (762mm)WBLL35.5X34.5 36" (915mm)39 1⁄2" (1000mm) highWBLL39.5X22.5 24" (610mm)WBLL39.5X28.5 30" (762mm)WBLL39.5X34.5 36" (915mm)

Lista Mobile LegsSame basic constructionas the Lista Leg but with2 factory mounted 6"heavy duty casters. Legis available with eitherfixed casters or swivelcasters with wheel locks.Requires stringer.

Fixed CastersPART NO. WORKSUR. DPTH.33 1⁄2" (850mm) overall heightWBLL/M33.5X22.5R6B 24" (610mm)WBLL/M33.5X28.5R6B 30" (762mm)WBLL/M33.5X34.5R6B 36" (915mm)35 1⁄2" (900mm) overall heightWBLL/M35.5X22.5R6B 24" (610mm)WBLL/M35.5X28.5R6B 30" (762mm)WBLL/M35.5X34.5R6B 36" (915mm)

Swivel CastersPART NO. WORKSUR. DPTH.33 1⁄2" (850mm) overall heightWBLL/M33.5X22.5S6B 24" (610mm)WBLL/M33.5X28.5S6B 30" (762mm)WBLL/M33.5X34.5S6B 36" (915mm)35 1⁄2" (900mm) overall heightWBLL/M35.5X22.5S6B 24" (610mm)WBLL/M35.5X28.5S6B 30" (762mm)WBLL/M35.5X34.5S6B 36" (915mm)

Panel LegsSame basic con-struction as theLista Leg with aformed panelwelded in place.Includes levelingglides.

PART NO. WORKSURFACE DPTH.27 1⁄2" (700mm) highWBLL /P27.5X22.5 24" (610mm)WBLL /P27.5X28.5 30" (762mm)WBLL /P27.5X34.5 36" (915mm)29 1⁄2" (750mm) highWBLL /P29.5X22.5 24" (610mm)WBLL /P29.5X28.5 30" (762mm)WBLL /P29.5X34.5 36" (915mm)31 1⁄2" (800mm) highWBLL /P31.5X22.5 24" (610mm)WBLL /P31.5X28.5 30" (762mm)WBLL /P31.5X34.5 36" (915mm)33 1⁄2" (850mm) highWBLL /P33.5X22.5 24" (610mm)WBLL /P33.5X28.5 30" (762mm)WBLL /P33.5X34.5 36" (915mm)39 1⁄2" (1000mm) highWBLL /P39.5X22.5 24" (610mm)WBLL /P39.5X28.5 30" (762mm)WBLL /P39.5X34.5 36" (915mm)

MobilePanel LegsSame basic con-struction as thePanel Leg butwith 2 factorymounted 6"heavy duty cast-ers. Availablewith either fixed casters or swivel cast-ers with wheel locks.

Fixed CastersPART NO. WORKSUR. DPTH.33 1⁄2" (850mm) overall heightWBLL/MP33.5X22.5R6B 24" (610mm)WBLL/MP33.5X28.5R6B 30" (762mm)WBLL/MP33.5X34.5R6B 36" (915mm)35 1⁄2" (900mm) overall heightWBLL/MP35.5X22.5R6B 24" (610mm)WBLL/MP35.5X28.5R6B 30" (762mm)WBLL/MP35.5X34.5R6B 36" (915mm)

Swivel CastersPART NO. WORKSUR. DPTH.33 1⁄2" (850mm) overall heightWBLL/MP33.5X22.5S6B 24" (610mm)WBLL/MP33.5X28.5S6B 30" (762mm)WBLL/MP33.5X34.5S6B 36" (915mm)35 1⁄2" (900mm) overall heightWBLL/MP35.5X22.5S6B 24" (610mm)WBLL/MP35.5X28.5S6B 30" (762mm)WBLL/MP35.5X34.5S6B 36" (915mm)

Leg HeightsUse the leg heights shown below tomatch a cabinet pedestal in a leg-plus-cabinet below-worksurface configuration. For a selection ofdrawer cabinets to serve as pedes talsfor workbenches, see pages 60-69.

LEG HEIGHT MATCHES CAB. PEDESTAL27 1⁄2" 600 height without base29 1⁄2" 600 height with 2" base31 1⁄2" 600 height with 4" base33 1⁄2" 600 height with 6" base

750 height without base351⁄2"(mobile) 600 height w/mobile base39 1⁄2" 900 height without base

750 height with 6" base

Privacy PanelsSteel panel attaches to leg or cabinetand runs full length of worksurface. 22 3⁄4" high.

PART NO. WORKSURF. LENGTHWBLPP22.8X48 48"WBLPP22.8X60 60"WBLPP22.8X72 72"WBLPP22.8X84 84"WBLPP22.8X90 90"WBLPP22.8X96 96"

Stringers/Foot RestsTelescoping heavy gauge U channel with2 mounting holes on each end plate.

PART NO. WORKSURF. LENGTHWBLST48/�� 48"WBLST60/�� 60"WBLST72/�� 72"WBLST84/�� 84"WBLST90/�� 90"WBLST96/�� 96"

Bottom ShelvesTelescoping heavy gauge steel shelf,12" deep, for use as storage or foot rest.150 lb. weight capacity for evenly dis-tributed loads, except as noted.

PART NO. WORKSURF. LENGTHWBLBS48/�� 48"WBLBS60/�� 60"WBLBS72/�� 72"WBLBS84/�� 84"WBLBS90/��* 90"WBLBS96/��* 96"

*100 lb. weight capacity

How to order stringers andbottom shelves

1. Select part number based onworkbench length.

2. � Specify left-hand (facing theworkbench) bench support.LL = Lista Leg or Panel LegNW = NW cabinetMP = MP cabinet

3. � Specify right-hand (facingthe workbench) bench support.LL = Lista Leg or Panel LegNW = NW cabinetMP = MP cabinet

EXAMPLE: to order a bottom shelffor a workbench with a 72" work-surface, an MP Width cabinet as theleft-hand pedestal and a Lista Leg asthe right-hand support, the partnumber would be WBLBS72/MPLL.


58

Industrial Workbench Above-Worksurface Accessories

Stationary Riser Shelves – 10 1⁄2" deepMade of steel to support heavy loads.Shelf is 13 1⁄2" overall height (12"clearance). Optional louvered closedback rear panel is shown above.

Open Riser ShelvesOpen shelf (open back, no shelf back stop)

PART NO. WORKSURFACE LENGTHSRS48 48"SRS60 60"SRS72 72"SRS84 84"SRS90 90"SRS96 96"

Open Riser Shelves with ShelfBack Stop Shelf with back stop (open back)

PART NO. WORKSURFACE LENGTHSRS48-1 48"SRS60-1 60"SRS72-1 72"SRS84-1 84"SRS90-1 90"SRS96-1 96"

Riser Shelves with Full PanelSolid closed back, with shelf back stop

PART NO. WORKSURFACE LENGTHSRS48-2 48"SRS60-2 60"SRS72-2 72"SRS84-2 84"SRS90-2 90"SRS96-2 96"

Pegboard closed back, with shelf back stop

PART NO. WORKSURFACE LENGTHSRS48-2P 48"SRS60-2P 60"SRS72-2P 72"SRS84-2P 84"SRS90-2P 90"SRS96-2P 96"

Louvered closed back, with shelf back stop(shown above)

PART NO. WORKSURFACE LENGTHSRS48-2L 48"SRS60-2L 60"SRS72-2L 72"SRS84-2L 84"SRS90-2L 90"SRS96-2L 96"

Stationary Riser Shelves – 15" deepProvides additional storage depth.Particularly suited for supporting over-head cabinets. Shelf is 13 1⁄2" overallheight (12" clearance). Optional peg-board closed back rear panel is shownabove.

Open Riser ShelvesOpen shelf (open back, no shelf back stop)

PART NO. WORKSURFACE LENGTHSRS48-15D 48"SRS60-15D 60"SRS72-15D 72"SRS84-15D 84"SRS90-15D 90"SRS96-15D 96"

Open Riser Shelves with ShelfBack Stop Shelf with back stop (open back)

PART NO. WORKSURFACE LENGTHSRS48-1-15D 48"SRS60-1-15D 60"SRS72-1-15D 72"SRS84-1-15D 84"SRS90-1-15D 90"SRS96-1-15D 96"

Riser Shelves with Full Panel Solid closed back, with shelf back stop

PART NO. WORKSURFACE LENGTHSRS48-2-15D 48"SRS60-2-15D 60"SRS72-2-15D 72"SRS84-2-15D 84"SRS90-2-15D 90"SRS96-2-15D 96"

Pegboard closed back, with shelf back stop(shown above)

PART NO. WORKSURFACE LENGTHSRS48-2P-15D 48"SRS60-2P-15D 60"SRS72-2P-15D 72"SRS84-2P-15D 84"SRS90-2P-15D 90"SRS96-2P-15D 96"

Louvered closed back, with shelf back stop

PART NO. WORKSURFACE LENGTHSRS48-2L-15D 48"SRS60-2L-15D 60"SRS72-2L-15D 72"SRS84-2L-15D 84"SRS90-2L-15D 90"SRS96-2L-15D 96"

The bench components on

this page allow you to cus-

tomize above the worksurface

for your particular needs.

All parts must be ordered

separately to match the length

of the worksurface you have

chosen.

How to order workbench above-worksurface accessories

1. Select worksurface length anddepth (see page 56).

2. Select back stop, end stop, shelfor panel part numbers to corre-spond to both length and depthof worksurface.

3. Specify paint color from thechart on the back cover.

Back Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approxi-mately 3" above the worksurface. Foruse with worksurfaces or shelves.

Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"

End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"

Adjustable Riser ShelfAssembliesShelves measure 1 1⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able sup-port brackets shown in the charts.

Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3

Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3

Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.

PART NO.

ARS-BR

Overhead CabinetsFor a selection of overhead cabinetsfor additional storage above 15"deepstationary riser shelves, see ourGeneral Storage Catalog.

Above-worksurface accessories

using the Nexus System are

shown on pages 76-85.


59

How to Order Industrial Workbench Custom Configurations

These are the basic steps

required for ordering custom

workbenches from Lista.

Select above-work-surface accessoriesSelect the back stop and endstops (page 58), shelves (sta-tionary or adjustable – see page 58) and/or Nexus Systemcomponents (pages 76-85) thatsuit your needs.

Select colorsSelect a color from the chart onthe back cover. Cabinet housingand drawer fronts can be differentcolors, but drawer interiors arealways gray.

3

4

3

31

2

22

3

Select worksurfaceSelect the worksurface that best suits your needs from the choices onpage 56. Choose the worksurfacelength, depth and style that you prefer.

Select below-worksur-face accessories or basesSelect either 2-leg,1-leg-with-cabinet or 2-cabinet configuration. Legs, stringers,bottom shelves and privacy panels areshown on page 57. Hanging cabinetsare shown on page 36. To select a cabinet pedestal(s), please see pages 60-69.

2

1

Sample Workbench Order

QTY. PART NO. DESCRIPTION

1 BTOP-60butcher block worksurface

1 WBLL33.5X28.5Lista Leg

1 WBLST60LLMP stringer

1 MP0600-0402-F6RGBB Easy-Order cabinet pedestal

1 WBTBS-60 back stop

1 ARS60B butcher block adjustable

riser shelf

1 WBTBS-60 shelf back stop

BBbright blue paint

3

3

3

2

2

2

1

4

TO ORDER AN EASY-ORDER

COMBINATION (WORK-

BENCH WITH PRECONFIG-

URED ACCESSORIES):

• PAGES 52-53 FOR INDUS-

TRIAL WORKBENCHES

• PAGES 54-55 FOR INDUS-

TRIAL MOBILE WORK-

BENCHES


60

NW Narrow Width Cabinets – 16 7⁄8" wide x 28 1⁄2" deep

• Ideal workbenchpedestals

• The right storage solutionwhen space is at a premium

Narrow Width cabinets serve as

workbench pedestals at this

biotech manufacturer’s central

utility plant’s maintenance hub.

The department’s electricians,

mechanics and technicians each

have a workstation which, in

addition to housing their com-

puter, tools and test equipment,

also has storage space for per-

sonal items.

Space-saving solutions for every workspace WE OFFER A NUMBER

OF PRE-CONFIGURED

EASY-ORDER COMBI-

NATIONS

• NARROW WIDTH

CABINETS:

PAGES 62-63

• NARROW WIDTH

MOBILE CABINETS:

PAGE 64


67

Lista’s modular building

block system means that your

MP Width cabinets can be con-

figured to exactly suit your

requirements.

To configure your custom

cabinet, simply follow the steps

shown in the charts to the left.

Total drawer and/or door

model numbers must add up to

the model number of the housing.

EXAMPLE: 900 housing

EXAMPLE: 900 housing with flushhinged door

18"(459MM)*27 UNITS

*INSIDE DIMENSIONS

➤

➤

➤

➤

24"(610MM)*36 UNITS

Select shelves, traysand doors

ShelvesShelves allow storage of bulky items inclose proximity to high density drawerstorage.

Adjustable ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-AS 19 3⁄4" (502mm) 24 1⁄4" (616mm)

Bottom ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-BS 19 13⁄16"(503mm) 23 3⁄4" (604mm)

Roll-Out TraysRoll-out trays allow easy access tostored items, even in the farthest cor-ner. Trays have 150 lb. (70kg) weightcapacity for evenly distributed loads.

PART NO. USABLE WIDTH USABLE DEPTHMP-TCN* 17 1⁄8" (435mm) 24" (609mm)

*mounts behind MP flush door (see below)

Flush Hinged DoorsDoors protect cabinet contents storedon shelves. Door with integrated han-dle is reversible in field to allow door toopen in opposite direction. To order,door opening orientation (“R” for rightor “L” for left) must be written in placeof the red box (■ ) in the part number.Only bottom and adjustable shelvesmay be installed behind flush doors.

PART NO. HEIGHTFD300-27■* 11 13⁄16" (300mm)FD450-27■* 17 11⁄16" (450mm)FD600-27■* 23 5⁄8" (600mm)FD750-27■ 29 9⁄16" (750mm)FD900-27■ 35 7⁄16" (900mm)

*limit: 1 adjustable shelf and 1 bottom shelf

Select drawer parti-tions and dividers• MP Width drawer interior sets, p. 71• Individual drawer partitioning

accessories, see our GeneralStorage Catalog

Select colorsTo order cabinet housing and drawerfront paint colors, see the back cover.

Select baseLista offers a wide array of cabinetbases to suit any need. For descrip-tions, see our General Storage Catalog.

Fork Truck BasePART NO. HEIGHTMP-FTB 2 3⁄8" (60mm)

Frame BasesPART NO. HEIGHT RAISE 600 CABS. TOMP-2 2" (50mm) desk heightMP-4 4" (100mm) low bench heightMP-6 6" (150mm) standard bench ht.

Mobile BasesMobile bases include a set of 2 fixedand 2 swivel casters with wheel locks.Mobile bases not recommended for usewith 1225 height or higher cabinets.

PART NO. CASTERS OAH CAP.Use with 1 MP housingCB-MP4B 4" x 2" 6 1⁄4" 1400 lb.CB-MP6B 6" x 2" 8 1⁄8" 2400 lb.Use with 2 MP housings on 1 pan baseMBP-MP/MP4ML 4"x 2" 6 1⁄4" 1400 lb.MBP-MP/MP6ML 6"x 2" 8 1⁄8" 2400 lb.

Select topTop depth is 28 1⁄2". (For tops for 29 1⁄2" deep housings with doors, con-tact your Lista representative.) For topdescriptions, see pages 42 and 56.

PART NO. DESCRIPTION HT.MP-RT retainer top w/ribbed mat 3⁄4"MP1BCT butcher block 1 3⁄4"MP1PCT plastic laminate 1 9⁄16"MP1RCT phenolic resin 1"MP1LSCT galvanized steel over wood 113⁄16"MP1SSC stainless steel cabinet cover 1⁄16"

Select drawersDrawers have 150 lb. (70kg) weightcapacity for evenly distributed loads.For MP Width cabinets with 440 lb.(200kg) weight capacity, see ourGeneral Storage Catalog.

PART NO. USABLE HT. SIDEWALL HT.MP75N 2 3⁄8" (61mm) 2" (52mm)MP100N 3 3⁄8" (86mm) 3" (77mm)MP125N 4 3⁄8" (111mm) 3" (77mm)MP150N 5 1⁄4" (133mm) 5" (127mm)MP175N 6 1⁄4" (159mm) 5" (127mm)MP200N 7 1⁄4" (185mm) 7" (177mm)MP250N 9 1⁄4" (229mm) 8 15⁄16" (227mm)MP300N 11" (279mm) 1015⁄16"(277mm)

Select cabinet housingLista’s steel cabinet housings offerstrength and flexibility. Drawers,shelves and roll-out trays can beassembled in any sequence.

MP Width Cabinet Housings22 3⁄16" wide x 28 1⁄2" deep(564mm x 725mm)

PART NO. OVERALL HEIGHT (without base)MP300 15 3⁄4" (400mm)MP450 21 5⁄8" (550mm)MP600 27 1⁄ 2" (700mm)MP750 33 1⁄ 2" (850mm)MP900 39 3⁄8" (1000mm)MP1225 52 3⁄16" (1325mm)MP1350 57 1⁄8" (1450mm)

MP Width Double Hinged DoorCabinet HousingsDouble hinged door housings are theonly door cabinets into which drawersand roll-out trays can be installed(shelves can also be installed in thesehousings). Includes individual lock (RG)and 2 keys.

22 3⁄16" wide x 29 1⁄2" deep(564mm x 750mm)

PART NO. OVERALL HEIGHT (without base)MPDHD600 27 1⁄ 2" (700mm)MPDHD750 33 1⁄ 2" (850mm)MPDHD900 39 3⁄8" (1000mm)MPDHD1225 52 3⁄16" (1325mm)MPDHD1350 57 1⁄8" (1450mm)

Select lockCabinets come equipped with an indi-vidual lock (RG) and 2 keys. To selectother locking options, choose from thechart below or see our General StorageCatalog.

PART NO. LOCK TYPERG individual lockKA keyed alike lockMA master lockNL* no lock wanted

*not available for double hinged door cabinets

•

100 drawer

100 drawer

150 drawer

150 drawer

200 drawer

200 drawer

For detailed directions on

ordering custom cabinets and

complete descriptions of the

options on this page, please

see our General Storage

Catalog.

Total drawer height= 900

•

150 drawer

150 drawer

600 flush doorTotal drawer and doorheight = 900

MP Width Custom Cabinet Ordering MP


62

PART NO. DRWS. COMPTS.NW0600-0701N-�� 7 -NW0600-0701NA-�� 7 59

DRAWER HT. DRAWER INTERIOR

2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1073" (100N) 1073" (100N) 107

How to read the charts on thispage

The 2 columns to the right of each cabinet illustration indicate:

• Drawer heights• Drawer interior sets (shown on

page 65)

The chart below the illustration indicates:

• Part numbers• Number of drawers• Number of drawer compartments

created by the interior sets (shownon page 65)

How to order a Narrow Width Easy-Order Cabinet

1. Select Easy-Order Cabinet Combi -na tion either without or with drawerinterior sets (designated by an “A”at the end of the part number – i.e.,NW0600-0601NA).

2. � Select base type.NB = noneF2 = 2" frame baseF4 = 4" frame baseF6 = 6" frame base

For additional bases, see page 61;for Easy-Order mobile combinations,see page 64.

3. � Select lock type.NL = noneRG = individualKA = keyed-alikeMA = master

For additional lock options, see ourGeneral Storage Catalog.

4. �� Select paint color. For colorchart, see the back cover or below.

EXAMPLE: to order an NW0600-0402N cabinet with a 6" frame base, an individual lock and Bright Blue paint, the part number would be NW0600-0402N-F6RGBB (shown in photo at top of page).

NW600 Cabinets for Workbench Pedestals27 1⁄ 2" high



2" (75N) 1052" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 104



2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 104

7" (200N) 104



2" (75N) 0183" (100N) 2124" (125N) 104

11" (300N-FFH) FILE DRAWER



3" (100N) 2125" (150N) 104

5" (150N) 104

7" (200N) 104


2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1043" (100N) 1073" (100N) 1075" (150N) 104



5" (150N) 104

5" (150N) 104




2" (75N) 2122" (75N) 2122" (75N) 1072" (75N) 1073" (100N) 1075" (150N) 104

7" (200N) 104



2" (75N) 0182" (75N) 0183" (100N) 2125" (150N) 104

5" (150N) 104

7" (200N) 104



2" (75N) 0183" (100N) 2124" (125N) 104

5" (150N) 104



PART NO. DRWS. COMPTS.NW0600-0201N-�� 2 -






5" (150N) 104

450 DOOR

BOTTOM SHELF

NW750 Cabinets for Workbench Pedestals33 1⁄ 2" high

NW Narrow Width Easy-Order Cabinet Combinations



63






NW900 Cabinets39 3⁄8" high

NW1225 Cabinets52 3⁄16" high


3" (100N) 2123" (100N) 2125" (150N) 104

5" (150N) 104

9" (250N) -



5" (150N) 107

5" (150N) 104

7" (200N) 107

9" (250N) 104



5" (150N) 104





5" (150N) 104

600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF



2" (75N) 0182" (75N) 0182" (75N) 2122" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 104

5" (150N) 104



2" (75N) 2122" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 1073" (100N) 1075" (150N) 104

7" (200N) 104



2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 104

5" (150N) 104

5" (150N) 104

7" (200N) 104



3" (100N) 2123" (100N) 2125" (150N) 104

5" (150N) 104

5" (150N) 104

9" (250N) -



5" (150N) 107

5" (150N) 107

5" (150N) 104

7" (200N) 104

9" (250N) 104



7" (200N) 104

7" (200N) 107

9" (250N) 104

9" (250N) 108



5" (150N) 107

6" (175N) 104












5" (150N) 104

750 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF


16 7⁄8" wide x 28 1⁄2" deep NW



64

PART NO. DRWS. COMPTS.NW0600-0501N-M-�� 5 -NW0600-0501NA-M-�� 5 50

includes 4" x 1 1⁄4" casters






3" (100N) 2125" (150N) 104

5" (150N) 104

7" (200N) 104


2" (75N) 1052" (75N) 2123" (100N) 1073" (100N) 1073" (100N) 107

5" (150N) 104


2" (75N) 0182" (75N) 2123" (100N) 2125" (150N) 104

7" (200N) 104

NW Narrow Width Easy-Order Mobile Cabinet Combinations



PART NO. DRWS. COMPTS.MNW0600-0701-�� 6 -MNW0600-0701A-�� 6 38

includes 4" x 2" casters

INCL. INT.

5" (150N) 104

450 DOOR

BOTTOM SHELF


2" (75N) 0182" (75N) 0183" (100N) 2125" (150N) 104

5" (150N) 104

7" (200N) 104




3" (100N) 2125" (150N) 107

5" (150N) 107

5" (150N) 104

7" (200N) 104




2" (75N) 2122" (75N) 2123" (100N) 2123" (100N) 1075" (150N) 107

9" (250N) 104

DRAW.HT. INT.

2" (75N) 2122" (75N) 1073" (100N) 1075" (150N) 104

7" (200N) 104



INCLUDES

600 DOOR

ADJ. SHELF

BOTTOM SHELF

DRAW.HT. INT.

3" (100N) 2123" (100N) 2125" (150N) 107

9" (250N) 104



INCL. INT.

5" (150N) 104

450 DOOR

BOTTOM SHELF

INCL. INT.

5" (150N) 104

450 DOOR

BOTTOM SHELF

Each mobile cabinet comes with:

• 2 fixed and 2 swivel casters withwheel locks

• Handles• Individual drawer latches • 150 lb. load capacity


The 2 columns to the right of each cabi-net illustration indicate:


page 65)




How to order a Narrow Width Easy-Order Mobile Cabinet

1. Select Easy-Order CabinetCombi na tion either without or withdrawer interior sets (designated byan “A” near the end of the partnumber – i.e., NW0600-0601NA-M).



3. �� Select paint color. For colorchart, see back cover.

EXAMPLE: to order an NW0600-0501NA-M cabinet with an individuallock and Red paint, the part numberwould be NW0600-0501NA-M-RGNR (shown in photo at top of page).

NW600 Mobile Cabinets33 1⁄8" high

Mobile Cabinet Options

NW750 Mobile Cabinets39 1⁄8" high

NW600 Mobile WorkCenters33 3⁄4" high x 33 3⁄4" wide

NW Mobile Cabinet TopsFor top descriptions, see page 42.

PART NO. DESCRIPTION HT.NW-RT retainer top with 3⁄4"

ribbed mat2NW-RT* retainer top with 3⁄4"

ribbed matNW1BCT butcher block 1 3⁄4"NW2BCT* butcher block 1 3⁄4"NW1PCT plastic laminate 1 9⁄16"NW2PCT* plastic laminate 1 9 ⁄16"

*use with mobile work centers

Mesh Drawer LinerNon-slip polyester mesh liner protectsitems in drawers without drawer inte-rior sets from shifting or sliding.Protects drawer bottom from scratchesand dents. Liner is non-toxic, washableand treated to inhibit mold and mildew.

PART NO.NWMDL

FoldingShelvesShelf can be mounted on either the leftor right side of any mobile or stationarycabinet. 50 lb. maximum capacity. Shelfis 15" wide x 28 1⁄2" deep.

PART NO. MOUNTS TOFS-36DX15-L left sideFS-36DX15-R right side


65

How to order a Narrow Width Easy-Order Drawer Interior Set

To order the drawer interior sets shownon this page, use the part number inthe chart and add the drawer height inplace of the green box.

EXAMPLE: to order an NWDR106drawer interior set for a 100 height (3")drawer, the part ordering numberwould be NWDR106-100.

For all drawer heightsPART NO. COMPTS. CMPT. WIDTHNWDR104-� 2 5 1⁄ 2"

2 6 1⁄4"

For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR105-� 3 4 1⁄8"

2 7 1⁄ 2"


3 5 1⁄ 2"


8 3 1⁄ 2"

For drawer heights 75 through 100PART NO. COMPTS. CMPT. SIZENWDR008-� 8 6" x 6"


4 6" x 6"


For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR018-� 2 6" x 6"

8 3" x 6"8 3" x 3"


8 3" x 6"


24 3" x 2"

For drawer height 75PART NO. COMPTS. CMPT. SIZENWDR083� 32 2" x 3"

24 2" x 2"

Sliding accessory trayFor drawer heights 100 through 250PART NO. COMPTS. CMPT. WID.NWDR-AT06-� 5 3"


3 7 1⁄ 2"

For all drawer heightsPART NO. COMPTS. CMPT. WIDTHNWDR108-� 4 5 1⁄ 2"

4 6 1⁄4"

For drawer heights 75 through 200PART NO. COMPTS. CMPT. WIDTHNWDR209-� 6 3 1⁄ 2"

3 4 1⁄8"

NW Narrow Width Easy-Order Drawer Interior Sets NW


66

• Perfect workbenchpedestals

• Can be adapted to serveas mobile cabinets

Multi-purpose versatility and functionality

MP Width Cabinets – 22 3⁄16" wide x 28 1⁄2" deep

WE OFFER A NUMBER

OF PRE-CONFIGURED

EASY-ORDER COMBI-

NATIONS

• MP WIDTH CABI-

NETS: PAGES 68-69

• MP WIDTH MOBILE

CABINETS: PAGE 70

Repair workbenches at Tinker

Air Force Base feature MP Width

cabinet pedestals to provide

technicians with ample storage

for tools and parts needed to

service aircraft hydraulics and

electronics.


67

Lista’s modular building

block system means that your

MP Width cabinets can be con-

figured to exactly suit your

requirements.

To configure your custom

cabinet, simply follow the steps

shown in the charts to the left.

Total drawer and/or door

model numbers must add up to

the model number of the housing.

EXAMPLE: 900 housing

EXAMPLE: 900 housing with flushhinged door

18"(459MM)*27 UNITS

*INSIDE DIMENSIONS

➤

➤

➤

➤

24"(610MM)*36 UNITS

Select shelves, traysand doors

ShelvesShelves allow storage of bulky items inclose proximity to high density drawerstorage.

Adjustable ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-AS 19 3⁄4" (502mm) 24 1⁄4" (616mm)

Bottom ShelfPART NO. USABLE WIDTH USABLE DEPTHMP-BS 19 13⁄16"(503mm) 23 3⁄4" (604mm)

Roll-Out TraysRoll-out trays allow easy access tostored items, even in the farthest cor-ner. Trays have 150 lb. (70kg) weightcapacity for evenly distributed loads.

PART NO. USABLE WIDTH USABLE DEPTHMP-TCN* 17 1⁄8" (435mm) 24" (609mm)

*mounts behind MP flush door (see below)

Flush Hinged DoorsDoors protect cabinet contents storedon shelves. Door with integrated han-dle is reversible in field to allow door toopen in opposite direction. To order,door opening orientation (“R” for rightor “L” for left) must be written in placeof the red box (■ ) in the part number.Only bottom and adjustable shelvesmay be installed behind flush doors.

PART NO. HEIGHTFD300-27■* 11 13⁄16" (300mm)FD450-27■* 17 11⁄16" (450mm)FD600-27■* 23 5⁄8" (600mm)FD750-27■ 29 9⁄16" (750mm)FD900-27■ 35 7⁄16" (900mm)

*limit: 1 adjustable shelf and 1 bottom shelf

Select drawer parti-tions and dividers• MP Width drawer interior sets, p. 71• Individual drawer partitioning

accessories, see our GeneralStorage Catalog

Select colorsTo order cabinet housing and drawerfront paint colors, see the back cover.

Select baseLista offers a wide array of cabinetbases to suit any need. For descrip-tions, see our General Storage Catalog.

Fork Truck BasePART NO. HEIGHTMP-FTB 2 3⁄8" (60mm)

Frame BasesPART NO. HEIGHT RAISE 600 CABS. TOMP-2 2" (50mm) desk heightMP-4 4" (100mm) low bench heightMP-6 6" (150mm) standard bench ht.

Mobile BasesMobile bases include a set of 2 fixedand 2 swivel casters with wheel locks.Mobile bases not recommended for usewith 1225 height or higher cabinets.

PART NO. CASTERS OAH CAP.Use with 1 MP housingCB-MP4B 4" x 2" 6 1⁄4" 1400 lb.CB-MP6B 6" x 2" 8 1⁄8" 2400 lb.Use with 2 MP housings on 1 pan baseMBP-MP/MP4ML 4"x 2" 6 1⁄4" 1400 lb.MBP-MP/MP6ML 6"x 2" 8 1⁄8" 2400 lb.

Select topTop depth is 28 1⁄2". (For tops for 29 1⁄2" deep housings with doors, con-tact your Lista representative.) For topdescriptions, see pages 42 and 56.

PART NO. DESCRIPTION HT.MP-RT retainer top w/ribbed mat 3⁄4"MP1BCT butcher block 1 3⁄4"MP1PCT plastic laminate 1 9⁄16"MP1RCT phenolic resin 1"MP1LSCT galvanized steel over wood 113⁄16"MP1SSC stainless steel cabinet cover 1⁄16"

Select drawersDrawers have 150 lb. (70kg) weightcapacity for evenly distributed loads.For MP Width cabinets with 440 lb.(200kg) weight capacity, see ourGeneral Storage Catalog.

PART NO. USABLE HT. SIDEWALL HT.MP75N 2 3⁄8" (61mm) 2" (52mm)MP100N 3 3⁄8" (86mm) 3" (77mm)MP125N 4 3⁄8" (111mm) 3" (77mm)MP150N 5 1⁄4" (133mm) 5" (127mm)MP175N 6 1⁄4" (159mm) 5" (127mm)MP200N 7 1⁄4" (185mm) 7" (177mm)MP250N 9 1⁄4" (229mm) 8 15⁄16" (227mm)MP300N 11" (279mm) 1015⁄16"(277mm)

Select cabinet housingLista’s steel cabinet housings offerstrength and flexibility. Drawers,shelves and roll-out trays can beassembled in any sequence.

MP Width Cabinet Housings22 3⁄16" wide x 28 1⁄2" deep(564mm x 725mm)

PART NO. OVERALL HEIGHT (without base)MP300 15 3⁄4" (400mm)MP450 21 5⁄8" (550mm)MP600 27 1⁄ 2" (700mm)MP750 33 1⁄ 2" (850mm)MP900 39 3⁄8" (1000mm)MP1225 52 3⁄16" (1325mm)MP1350 57 1⁄8" (1450mm)

MP Width Double Hinged DoorCabinet HousingsDouble hinged door housings are theonly door cabinets into which drawersand roll-out trays can be installed(shelves can also be installed in thesehousings). Includes individual lock (RG)and 2 keys.

22 3⁄16" wide x 29 1⁄2" deep(564mm x 750mm)

PART NO. OVERALL HEIGHT (without base)MPDHD600 27 1⁄ 2" (700mm)MPDHD750 33 1⁄ 2" (850mm)MPDHD900 39 3⁄8" (1000mm)MPDHD1225 52 3⁄16" (1325mm)MPDHD1350 57 1⁄8" (1450mm)

Select lockCabinets come equipped with an indi-vidual lock (RG) and 2 keys. To selectother locking options, choose from thechart below or see our General StorageCatalog.

PART NO. LOCK TYPERG individual lockKA keyed alike lockMA master lockNL* no lock wanted

*not available for double hinged door cabinets

•

100 drawer

100 drawer

150 drawer

150 drawer

200 drawer

200 drawer

For detailed directions on

ordering custom cabinets and

complete descriptions of the

options on this page, please

see our General Storage

Catalog.

Total drawer height= 900

•

150 drawer

150 drawer

600 flush doorTotal drawer and doorheight = 900

MP Width Custom Cabinet Ordering MP


68


The 2 columns to the right of each cabi-net illustration indicate:


page 71)

The chart below the illustration indi-cates:



How to order an MP Width Easy-Order Cabinet

1. Select Easy-Order Cabinet Combi -na tion either without or with drawerinterior sets (designated by an “A”at the end of the part number – i.e.,MP0750-0302NA).

2. � Select base type.NB = noneFT = fork truckF2 = 2" frame baseF4 = 4" frame baseF6 = 6" frame base

For additional bases, see page 67;for Easy-Order mobile combinations,see page 70.



4. �� Select paint color. For colorchart, see the back cover or below.

EXAMPLE: to order an MP0750-0302NA cabinet with a fork truck base,an individual lock and Light Gray paint,the part number would be MP0750-0302NA-FTRGLG(shown in photo at top of page).

MP300 Cabinets15 3⁄4" high

MP600 Cabinets for Workbench Pedestals27 1⁄2" high

PART NO. DRWS. COMPTS.MP0300-0401N-�� 4 -MP0300-0401NA-�� 4 50


2" (75N) 3162" (75N) 3162" (75N) 2092" (75N) 209



2" (75N) 3163" (100N) 2094" (125N) 209



3" (100N) 2097" (200N) 104



5" (150N) 209

5" (150N) 104



2" (75N) 3162" (75N) 3162" (75N) 2092" (75N) 2093" (100N) 2093" (100N) 2093" (100N) 209



2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104



2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 104

7" (200N) 104



3" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104

5" (150N) 104



2" (75N) 3163" (100N) 2094" (125N) 104

11" (300N) -



3" (100N) 3165" (150N) 209

5" (150N) 104

7" (200N) 104



5" (150N) 209

7" (200N) 104

9" (250N) 104



5" (150N) 104

450 DOOR

BOTTOM SHELF


MP Width Easy-Order Cabinet Combinations


69


5" (150N) 104

600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF

MP750 Cabinets for Workbench Pedestals33 1⁄2" high

MP900 Cabinets39 3⁄8" high



2" (75N) 5102" (75N) 5102" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2099" (250N) 104



3" (100N) 3163" (100N) 2095" (150N) 209

5" (150N) 104

9" (250N) 104



2" (75N) 5102" (75N) 5102" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2093" (100N) 2095" (150N) 104

5" (150N) 104



2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 209

5" (150N) 104



5" (150N) 209

5" (150N) 104

7" (200N) 104

9" (250N) 104



3" (100N) 3165" (150N) 209

7" (200N) 104

11" (300N) -



2" (75N) 0282" (75N) 3163" (100N) 2095" (150N) 209

5" (150N) 104

7" (200N) 104



2" (75N) 3162" (75N) 3163" (100N) 2093" (100N) 2095" (150N) 104

9" (250N) 104




5" (150N) 209

5" (150N) 104

5" (150N) 104

7" (200N) 104

9" (250N) 104



2" (75N) 3162" (75N) 3163" (100N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104

7" (200N) 104



3" (100N) 3165" (150N) 209

5" (150N) 209

7" (200N) 104

11" (300N) -



2" (75N) 0282" (75N) 3163" (100N) 3165" (150N) 209

5" (150N) 209

5" (150N) 104

7" (200N) 104



3" (100N) 2097" (200N) 104

600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF



3" (100N) 3163" (100N) 2095" (150N) 209

5" (150N) 104

5" (150N) 104

9" (250N) 104



5" (150N) 104

750 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF


22 3⁄16" wide x 28 1⁄2" deep MP


70

PART NO. DRWS. COMPTS.MCMP0300-0301N-�� 3 -MCMP0300-0301NA-�� 3 34

includes 4" x 1 1⁄4" castersincludes 4-sided retainer top with ribbed mat

PART NO. DRWS. COMPTS.MCMP0300-0201N-�� 2 -MCMP0300-0201NA-�� 2 13


PART NO. DRWS. COMPTS.MSC-�� - -



3" (100N) 2097" (200N) 104


2" (75N) 3163" (100N) 2094" (125N) 209

MP Width Easy-Order Mobile Cabinet Combinations

PART NO. DRWS. COMPTS.MP0600-0601N-M-�� 6 -MP0600-0601NA-M-�� 6 82


PART NO. DRWS. COMPTS.MMP0600-0702-�� 5 -MMP0600-0702A-�� 5 49

includes 6" x 2" casters44 3⁄8" wide

INCLUDES

600 DOOR

ADJ. SHELF

BOTTOM SHELF


2" (75N) 0282" (75N) 3163" (100N) 3163" (100N) 2093" (100N) 2095" (150N) 104




3" (100N) 3165" (150N) 209

5" (150N) 104

7" (200N) 104




2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 104

7" (200N) 104

DRAW.HT. IN.

2" (75N) 3162" (75N) 3163" (100N) 2095" (150N) 104

7" (200N) 104

DRAW.HT. IN.

5" (150N) 104

450 DOOR

BOTTOMSHELF

DRAW.HT. IN.

5" (150N) 104

450 DOOR

BOTTOMSHELF

INCLUDES

600 DOOR

ADJ. SHELF

BOTTOM SHELF

DRAW.HT. IN.

2" (75N) 5102" (75N) 0183" (100N) 3165" (150N) 209

7" (200N) 104

PART NO. DRWS. COMPTS.MMP0600-0402-�� 2 -MMP0600-0402A-�� 2 8

includes 6" x 2" casters44 3⁄8" wide

PART NO. DRWS. COMPTS.MMPNW0600-0703-�� 5 -MMPNW0600-0703A-�� 5 57

includes 6" x 2" casters39" wide (MP width drawers, NW width door)

Each mobile cabinet comes with:

• 2 fixed and 2 swivel casters withwheel locks

• Tubular steel handles• Individual drawer latches • 150 lb. load capacity


The 2 columns to the right of each cabinet illustration indicate:


page 71)




How to order an MP Width Easy-Order Mobile Cabinet

1. Select Easy-Order CabinetCombi na tion either without or withdrawer interior sets (designated byan “A” near the end of the partnumber – i.e., MP0600-0402NA-M).



3. �� Select paint color. For colorchart, see back cover.

EXAMPLE: to order an MP0600-0501NA-M cabinet with an individuallock, Bright Blue paint and a retainertop, the part number would beMP0600-0501NA-M-RGBB, with anMP-RT top (shown in photo at top ofpage).

MP300 Mobile Carts32 1⁄2" high

MP600 Mobile Cabinets35 1⁄2" high

MP600 Mobile WorkCenters35 1⁄2" high

MP Mobile Cabinet TopsFor top descriptions, see page 42.

PART NO. DESCRIPTION HT.MP-RT retainer top with 3⁄4"

ribbed mat2MP-RT* retainer top with 3⁄4"

ribbed matMP1BCT butcher block 1 3⁄4"MP2BCT* butcher block 1 3⁄4"MP1PCT plastic laminate 1 9 ⁄16"MP2PCT* plastic laminate 1 9 ⁄16"

*use with 2 MP housings

Folding ShelvesShelf can be mounted on either the leftor right side of any mobile or stationarycabinet. 50 lb. maximum capacity. Shelfis 15" wide x 28 1⁄2" deep. Not for usewith mobile carts.

PART NO. MOUNTS TOFS-36DX15-L left sideFS-36DX15-R right side

Mobile Cabinet Options

Mesh Drawer LinerNon-slip polyester mesh liner protectsitems in drawers without drawer inte-rior sets from shifting or sliding.Protects drawer bottom from scratchesand dents. Liner is non-toxic, washableand treated to inhibit mold and mildew.

PART NO.MPMDL


71

For all drawer heightsPART NO. COMPTS. CMPT. WIDTHMPDR104-� 2 7 1⁄ 2"

2 9 1⁄4"



For drawer heights 75 through 150PART NO. COMPTS. CMPT. WIDTHMPDR316-� 4 3 1⁄ 2"

12 4 1⁄ 8"


9 4 1⁄ 8"


12 2 5⁄ 8"


12 3 1⁄ 2"

For drawer heights 75 through 150PART NO. COMPTS. CMPT. DEPTHMPDR510-� 3 3 1⁄ 2"

4 15 5⁄ 8"

For drawer heights 75 through 125PART NO. COMPTS. CMPT. SIZEMPDR012-� 12 6" x 6"

For drawer heights 75 through 125PART NO. COMPTS. CMPT. SIZEMPDR018-� 12 3" x 6"

6 6" x 6"

For drawer heights 75 and 100PART NO. COMPTS. CMPT. SIZEMPDR024-� 24 3" x 6"

For drawer height 75PART NO. COMPTS. CMPT. SIZEMPDR028-� 16 3" x 3"

8 3" x 6"4 6" x 6"

For drawer height 75PART NO. COMPTS. CMPT. WIDTHMPDR480-� 24 1 1⁄4"

16 1 3⁄4"

For drawer height 75PART NO. COMPTS. CMPT. WIDTHMPDR482-� 23 1 3⁄4"

14 2 3⁄4"

Sliding accessory trayFor drawer heights 100 through 300PART NO. COMPTS. CMPT. WIDTHMPDR-AT10-� 1 6"

8 3"

How to order an MP Width Easy-Order Drawer Interior Set

To order the drawer interior sets shownon this page, use the part number inthe chart and add the drawer height inplace of the green box.

EXAMPLE: to order an MPDR206drawer interior set for a 100 height (3")drawer, the part ordering numberwould be MPDR206-100.

MP Width Easy-Order Drawer Interior Sets MP


Lista Technical Electronic Workstations

Arizona State University’s

Architecture Department has

equipped a number of its student

work areas with versatile Lista

tech nical electronic workstations.

The workstations’ attractive

design, wealth of available

accessories and configurability

have made them a popular solu-

tion with both students and staff.


39

Featuring a sleek, aestheti-

cally pleasing design, the real

beauty of Lista’s technical elec-

tronic workstations is their abil-

ity to perfectly suit the widest

variety of applications.

Our modular approach is the

key to our technical electronic

workstation’s versatility, with

flexible standard components

and accessory options both

above and below the worksur-

face, leading to greater produc-

tivity and efficiency.

Many configurations feature

a built-in electrical power sup-

ply, conveniently located on

either an instrument riser or as

a part of the Nexus accessory

system (for more on the Nexus

system, see pages 76-85).

Choose from a wide array of

static-safe components, includ-

ing ESD paint, worksurfaces

and shelves, conductive plastic

boxes and grounding acces-

sories.

Technical electronic work-

stations have a 1,000 lb.

(454kg) weight capacity, and

can be configured with a vari-

ety of leg and cabinet pedestal

choices, including mobile bases

for increased flexibility and

ease of reconfiguration. Mobile

workstations can be quickly

moved to and from a work site.

Wide choice of above-work -surface accessories

Access to electrical power avail-able on instrument risers andNexus Accessory System

Durable worksurfaces come inmultiple lengths and depths, in achoice of materials, including ESD

Front and rear top support rails protect integrity of worksurface

Choice of pedestal and leg sup-ports, including Tech Leg, TechPanel Leg and a large selection ofcabinet pedestals

Choice of leveling glides ormobile casters (for 4-leg configurations)


40

��

��

��

Easy-Order Technical Electronic Workstations

PART NO. INCLUDESTB3003-�� 15" deep station. riser shelf

with louvered back panel(2) 16" high overhead cabs

with retractable doors*

*48" long benches include (1) overhead cabinet

Easy-Order technical electronic work-stations include Narrow Width (16 7⁄8"wide) cabinet pedestals (see page 61for descriptions). Customer-specifiedcabinet pedestals (shown in gray) mustbe ordered separately – for Easy-Order cabinet pedestals, see pages 62-63 forNarrow Width cabinets and pages 68-69 for MP Width cabinets. For moreinformation on overhead cabinets, seeLista’s General Storage Catalog.

How to order an Easy-OrderTechnical ElectronicWorkstation

1. Select Easy-Order workstation configuration.

2. � Select worksurface style. Seepage 42 for descriptions.PLB = Plastic laminate BTB = Butcher blockSDB = Static dissipative (includes

ground cord and hardware)All worksurfaces have a bull-nose front edge and are 30"deep.



EXAMPLE: to order a TB3201 work-station with a 72" long plastic lami-nate worksurface and shelf and BrightBlue paint, the part number would be TB3201-PLB7230BB.

5. Select cabinet pedestals (forTB03xx and TB06xx configurations).For Easy-Order cabinet pedestals,see pages 62-63 for Narrow Widthcabinets and pages 68-69 for MPWidth cabinets.

EXAMPLE (CUSTOMER-SPECIFIEDCABINETS): to order a TB0300 work-station with a 72" long plastic lami-nate worksurface, and anNW0750-0601NA cabinet pedestal with Bright Blue paint, the workstation part number would beTB0300-PLB7230BB, and the cabinet part number would beNW0750-0601NA-NBRGBB.

PART NO.TB3000-��

Overall bench height including worksurface is 35 1⁄4". Includes: • 2 tech panel legs (legs 33 1⁄2" high)• 1 pair of top support rails• 1 stringer

PART NO. INCLUDESTB3001�� 12" adj. riser shelf w/back stop

workstation back stop

Overall bench height including worksurface is 35 1⁄4". Includes: • 2 tech panel legs (legs 33 1⁄2" high)• 1 pair of top support rails• 1 stringer• 1 WBHC150-1 hanging cabinet

PART NO. INCLUDESTB3002-�� (2) 16" instrument riser

supports (1 with power) 12" deep instru. riser shelfworksta. + shelf back stops

Overall bench height including worksurface is 35 1⁄4". Includes: • 1 tech panel leg (leg 33 1⁄2" high)• 1 pair of top support rails• 1 stringer• 1 NW0600-0402NA-F6RG cabinet






PART NO. INCLUDESTB3101-�� 12" adj. riser shelf w/back stop













---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Workstations with 2 TechLegs

Workstations with 2 TechLegs and 1 Drawer

Workstations with 1 TechLeg and 1 Cabinet



41

��

��

��

��

Overall bench height including worksurface is 35 1⁄4". Includes: • 1 tech panel leg (leg 33 1⁄2" high)• 1 pair of top support rails• 1 stringer• cabinet pedestal chosen by customer

Overall bench height including worksurface is 35 1⁄4". Includes: • 1 NW0600-0402NA-F6KA cabinet*• 1 NW0600-0202NA-F6KA cabinet**includes keyed-alike locks

Overall bench height including worksurface is 35 1⁄4". Includes: • 1 NW0600-0501NA-F6KA cabinet*• 1 NW0600-0201N-F6KA cabinet**includes keyed-alike locks

Overall bench height including worksurface is 35 1⁄4". Includes: • 2 cabinet pedestals chosen by

customer



















PART NO. INCLUDESTB0603�� 15" deep station. riser shelf




PART NO.TB0600��














---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Workstations with 1 Leg, 1 Customer-Specified Cab.

Workstations with 2 Cabinets Workstations with 2 Customer-SpecifiedCabinets



42

Plastic LaminateParticle board core with plastic lami-nated top and sides. 1 9⁄16" thick. Dovegray is standard but other colors areavailable on request. Avail able in standard square edge or bullnose frontedge (shown above). To order a bull-nose edge, add “BN” to the end of thepart number.

PART NO. LENGTH24" deepPTOP-4824 48" PTOP-6024 60" PTOP-7224 72" PTOP-8424* 84" PTOP-9024* 90" PTOP-9624* 96" 30" deepPTOP-48 48" PTOP-60 60" PTOP-72 72" PTOP-84* 84" PTOP-90* 90" PTOP-96* 96" 36" deepPTOP-4836 48" PTOP-6036 60" PTOP-7236 72" PTOP-8436* 84"PTOP-9036* 90" PTOP-9636* 96"


Phenolic ResinA high-pressure laminate designed forlab oratory worksurfaces. Resistant tochemicals, stains or discoloration.Worksurface is 1" thick phenolic resin,available in black.

PART NO. SIZERTOP-48 48" long x 30" deep RTOP-60 60" long x 30" deep RTOP-72* 72" long x 30" deep RTOP-84* 84" long x 30" deep RTOP-90* 90" long x 30" deep RTOP-96* 96" long x 30" deep


Static Dissipative PlasticLaminateParticle board core with plastic lami-nated top and sides, 1 9⁄16" thick.Grounding bolt and 10' grounding cordwith a 1 megohm resistor included.Standard color is dove gray but other colors available on request. Available instandard square edge or bullnose frontedge (shown above). To order a bull-nose edge, add “BN” to end of partnumber.

Worksurfaces display electrical proper-ties within static dissipative boundariesof 106-109 ohms over a wide range ofrelative humidities (ranging from 60%RH to as low as 10% RH) to meet ESDspecifications. Meets EOS/ESD S4.1specifications. For detailed specifica-tions, please contact Lista.

PART NO. LENGTH24" deepSDTOP-4824 48" SDTOP-6024 60" SDTOP-7224 72" SDTOP-8424* 84" SDTOP-9024* 90" SDTOP-9624* 96" 30" deepSDTOP-48 48" SDTOP-60 60" SDTOP-72 72" SDTOP-84* 84" SDTOP-90* 90" SDTOP-96* 96" 36" deepSDTOP-4836 48" SDTOP-6036 60"SDTOP-7236 72" SDTOP-8436* 84" SDTOP-9036* 90" SDTOP-9636* 96"


Lista worksurfaces are all

easy to maintain, rugged, and

durable.

Worksurfaces come in 48",

60", 72", 84", 90" and 96"

lengths, and are 24", 30" or 36"

deep, depending on worksur-

face. Other sizes are available,

and certain worksurfaces are

available with a bullnose front

edge.

Butcher BlockSatin finish 1 3⁄4" thick hardwood.Available in standard square edge orbullnose front edge (shown above). Toorder a bullnose edge, add “BN” to theend of the part number.

PART NO. LENGTH24" deepBTOP-4824 48" BTOP-6024 60" BTOP-7224 72" BTOP-8424 84" BTOP-9024 90" BTOP-9624 96" 30" deepBTOP-48 48" BTOP-60 60" BTOP-72 72" BTOP-84 84" BTOP-90 90"BTOP-96 96" 36" deepBTOP-4836 48" BTOP-6036 60"BTOP-7236 72" BTOP-8436 84"BTOP-9036 90" BTOP-9636 96"

Technical Electronic and Align® Workstation Worksurfaces

Static DissipativeWorksurface AccessoriesESD Isolation KitsRequired to prevent a redundantground (ground loop) with cabinet/worksurface grounding system.Necessary when powered items areused with either non-ESD paintedNexus accessories, ESD paintedNexus accessories with static dissipa-tive worksurfaces, or powered instru-ment riser shelves on staticdissipative worksurfaces.

PART NO. DESCRIPTIONESDISO-KIT/IRSS instrument riser

shelf isolation kit

Worksurface Grounding KitKit is supplied with all static dissipa-tive worksurfaces.

PART NO. DESCRIPTIONGCT 8' cord w/1 megohm resistor

Ball Transfer WorksurfacesBall transfer worksurfaces offer a costeffective, efficient means of workflowmanagement for products or pallets inan assembly, repair or rework environ-ment. Please contact your Lista repre-sentative for help in configuring asystem and providing the solution bestsuited to your requirements.


43

Technical Electronic Workstation Below-Worksurface Components

Tech LegExtendersPair of extenders isused to add addi-tional height adjust-ment for stationaryTech Legs and TechPanel Legs. Adds upto 6" in height in 1" increments.Extender accepts glides for levelingand/or additional height adjustment.

PART NO. DESCRIPTIONWBTL / EXT6 pair

Top Support RailsPair of rails support front and back ofwork surface to protect integrity of top.Required for all technical electronicworkstations with at least one leg.Not for use with workstations with 2 cabinet pedestals. Comes as pair.

PART NO. WORKSURF. LENGTHWBTSC48/�� 48"WBTSC60/�� 60"WBTSC72/�� 72"WBTSC84/�� 84"

Tech Legs2" x 2" tube leg pairwith cross piece. Legsinclude glides for lev-eling on uneven sur-faces. Top supportrails are requiredfor all workstationconfigurationswhich include TechLeg(s) (not included).

PART NO. WORKSURFACE DEPTH27 1⁄2" (700mm) highWBTL27.5X22.5 24" (610mm)WBTL27.5X28.5 30" (762mm)WBTL27.5X34.5 36" (915mm)33 1⁄2" (850mm) highWBTL33.5X22.5 24" (610mm)WBTL33.5X28.5 30" (762mm)WBTL33.5X34.5 36" (915mm)

Tech Panel LegsSame basic construc-tion as the Tech Legwith a formed panelwelded in place.Includes levelingglides. Top supportrails are required forall workstation con-figurations whichinclude Tech Panel Leg(s) (notincluded).

PART NO. WORKSURFACE DEPTH27 1⁄2" (700mm) highWBTL /P27.5X22.5 24" (610mm)WBTL /P27.5X28.5 30" (762mm)WBTL /P27.5X34.5 36" (915mm)33 1⁄2" (850mm) highWBTL /P33.5X22.5 24" (610mm)WBTL /P33.5X28.5 30" (762mm)WBTL /P33.5X34.5 36" (915mm)

Tech LegMobileCastersPair of casters usedto add mobility toTech Legs and Tech Panel Legs. Swivelstem casters are 5" x 1 1⁄4" and replaceglides which come with stationary legs.Tech Legs with mobile casters can notbe paired with a cabinet pedestal.

PART NO. DESCRIPTIONWBTL/CAST5WB pair, with wheel brakeWBTL/CAST5NB pair, w/o wheel brake

How to order top supportrails

1. Select part number based onworksurface length.

2. � Specify left-hand (facing theworkstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinet

3. � Specify right-hand (facingthe workstation) bench support.TL = Tech Leg or Panel LegNW* = NW cabinetMP* = MP cabinet

EXAMPLE: to order a pair of topsupport rails for a workstation witha 72" worksurface, an MP Widthcabinet as the left-hand pedestaland a Tech Leg as the right-handsupport, the part number would be WBTSC72/MPTL.

*top support rail not used to supportworksurface of workstations with 2 cabinet pedestals

Stringers/Foot RestsTelescoping heavy gauge U channel with2 mounting holes on each end plate.

PART NO. WORKSURF. LENGTHWBLST48/�� 48"WBLST60/�� 60"WBLST72/�� 72"WBLST84/�� 84"WBLST90/�� 90"WBLST96/�� 96"

Bottom ShelvesTelescoping heavy gauge steel shelf,12" deep, for use as storage or foot rest.150 lb. weight capacity for evenly dis-tributed loads, except as noted.

PART NO. WORKSURF. LENGTHWBLBS48/�� 48"WBLBS60/�� 60"WBLBS72/�� 72"WBLBS84/�� 84"WBLBS90/��* 90"WBLBS96/��* 96"

*100 lb. weight capacity

Privacy PanelsSteel panel attaches to leg or cabinetand runs full length of worksurface. 22 3⁄4" high.

PART NO. WORKSURF. LENGTHWBLPP22.8X48 48"WBLPP22.8X60 60"WBLPP22.8X72 72"WBLPP22.8X84 84"WBLPP22.8X90 90"WBLPP22.8X96 96"

Wrist Strapand GroundBlockMounts to under -side of work surface.Dual receptacles for2 wrist straps.

PART NO. DESCRIPTIONGB ground block WS wrist strap with 6' coil cord*

* with 1 megohm resistor

Ground KitsKit is supplied with all static dissipativeworksurfaces or shelves. Includes attach-ing hardware.

PART NO. DESCRIPTIONGCT worksurface kit with 8' cord*GCS shelf kit with 6' cord**

* with 1 megohm resistor** without 1 megohm resistor

How to order stringers andbottom shelves

1. Select part number based onworksurface length.

2. � Specify left-hand (facing theworkstation) bench support.TL = Tech Leg or Panel LegNW = NW cabinetMP = MP cabinet

3. � Specify right-hand (facingthe workstation) bench support.TL = Tech Leg or Panel LegNW = NW cabinetMP = MP cabinet

EXAMPLE: to order a bottom shelffor a workstation with a 72" work-surface, an MP Width cabinet as theleft-hand pedestal and a Tech Leg asthe right-hand support, the partnumber would be WBLBS72/MPTL.

Cabinet PedestalsFor a selection of drawer cabinets to serve as pedestals for technicalelectronic workstations, see pages 60-69.


44

Technical Electronic Workstation Above-Worksurface Accessories

Back Stops and End StopsSteel back stops and end stops haverounded corners. Stops extend approxi-mately 3" above the worksurface. Foruse with worksurfaces or shelves.

Back StopsPART NO. WORKSURFACE LENGTHWBTBS-48 48"WBTBS-60 60"WBTBS-72 72"WBTBS-84 84"WBTBS-90 90"WBTBS-96 96"

End Stops (pair)PART NO. WORKSURFACE DEPTHWBTES-22 24"WBTES-28 30"WBTES-34 36"

Adjustable Riser ShelfAssembliesShelves measure 1 1⁄4" thick x 12" deep.Shelf height can be adjusted in 1 1⁄2"increments from 12"-18". A steel backstop is available for the shelf assembly(ordered separately – see above).Includes the number of adjust able sup-port brackets shown in the charts.

Assemblies with PlasticLaminate ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS90P 90" 3ARS96P 96" 3

Assemblies w/Butcher Block ShelfPART NO. WKSURF. LGTH. # SUPPORTSARS48B 48" 2ARS60B 60" 2ARS72B 72" 2ARS84B 84" 2ARS90B 90" 3ARS96B 96" 3

Adjustable Support BracketBracket supports riser shelf. May berequired to supplement the supportsincluded with shelf assemblies (seecharts above) for support of longshelves or shelves carrying heavy loads.

PART NO.ARS-BR

Instrument Riser ShelfSupportsEither 16", 20" or 24" high, withremovable side panels. 20" and 24"models provide extra space to run airlines or meet additional power require-ments. Ordered individually. Shelvesordered separately (see right). Seepage 42 for isolation kits when usedwith static dissipative worksurfaces.

16" High SupportsPART NO. DESCRIPTIONIRSS16 no powerIRSS16/15 with 15 ampIRSS16/20 with 20 amp IRSS16/GF-15 with 15 amp GFCIIRSS16/GF-20 with 20 amp GFCI

Lista recommends using a third center support with 84", 90" and 96" shelves

20" High SupportsPART NO. DESCRIPTIONIRSS20 no powerIRSS20/15 with 15 amp IRSS20/20 with 20 amp IRSS20/GF-15 with 15 amp GFCIIRSS20/GF-20 with 20 amp GFCI


24" High SupportsPART NO. DESCRIPTIONIRSS24 no powerIRSS24/15 with 15 amp IRSS24/20 with 20 amp IRSS24/GF-15 with 15 amp GFCIIRSS24/GF-20 with 20 amp GFCI


Riser ShelvesAll shelves measure 1 1⁄4" thick x 12"or 15" deep and mount to shelf sup-ports. Add “12” or “15” in place of thegreen box (� ) in the part number tospecify a shelf depth of 12" or 15".Back stops for shelves can be orderedfrom the chart to left.

Plastic Laminate ShelvesPART NO. LENGTHPS48 � 48"PS60 � 60"PS72 �* 72"PS84 �** 84"PS90 �** 90"PS96 �** 96"

*Lista recommends using a back stop or third center support with 72" shelves

**Lista recommends using a third center support with 84", 90" and 96" shelves

Static Dissipative PlasticLaminate ShelvesComes with grounding bolt andgrounding cord. See page 42 for staticdissipative specifications.

PART NO. LENGTHSD48 � 48"SD60 � 60"SD72 �* 72"SD84 �** 84"SD90 �** 90"SD96 �** 96"

*Lista recommends using a back stop or third center support with 72" shelves

**Lista recommends using a third centersupport with 84", 90" and 96" shelves

Butcher Block ShelvesPART NO. LENGTHBS48 � 48"BS60 � 60"BS72 � 72"BS84 �* 84"BS90 �* 90"BS96 �* 96"

*Lista recommends using a third center support with 84", 90" and 96" shelves

Instrument Riser Shelf Rear PanelsFull rear panel extends from worksur-face to form back panel between theworksurface and riser shelf. Availableflush with the shelf or with a 2" backstop for the riser shelf.

PART NO. DESCRIPTIONFlush with shelfIRS-FRP�� solid rear panelIRS-FRP�� -P pegboard rear panelIRS-FRP�� -L louvered rear panelWith 2" back stopIRS-FRP�� -2 solid rear panelIRS-FRP�� -2P pegboard rear panelIRS-FRP�� -2L louvered rear panel

Above-worksurface accessories

using the Nexus System are

shown on pages 76-85.

How to order a rear panel

1. Select part number.

2. � Specify shelf length.48 = 48" long60 = 60" long72 = 72" long84 = 84" long90 = 90" long96 = 96" long

3. � Specify shelf supportheight.16 = 16" high20 = 20" high24 = 24" high

EXAMPLE: to order a pegboardrear panel for a 60" long shelf with16" shelf supports, the part numberis IRS-FRP6016-P.

Overhead CabinetsFor a selection of overhead cabinetsfor additional storage above instru-ment riser shelves, see our GeneralStorage Catalog.


45

How to Order Technical Electronic Workstation Custom Configurations

These are the basic steps

required for ordering custom

technical electronic work -

stations.

Select above-worksurface accessoriesSelect the back stop and endstops (page 44), shelves (instru-ment riser or adjustable – seepage 44) and/or Nexus Systemcomponents (pages 76-85) thatsuit your needs.

Select colorsSelect a color from the chart on theback cover. Cabinet housing anddrawer fronts can be different colors,but drawer interiors are always gray.

3

4

TO ORDER AN EASY-ORDER

COMBINATION (WORKSTA-

TION WITH PRECONFIG-

URED ACCESSORIES), SEE

PAGES 40-41.

Select worksurfaceSelect the worksurface that best suitsyour needs from the choices on page42. Choose the worksurface length,depth and style that you prefer.

Select below-worksur-face accessories or basesSelect either 2-leg,1-leg-with-cabinet or 2-cabinet configuration. Legs, stringers,bottom shelves and privacy panels areshown on page 43. Hanging cabinetsare shown on page 36. To select a cabi-net pedestal(s), please see pages 60-69.

2

1

��

3

31

2

2

22

3

3

Sample Workstation Order

QTY. PART NO. DESCRIPTION

1 PTOP-60BNplastic laminate worksurface

with bullnose edge 60" x 30"

1 WBTL33.5X28.5Tech Leg

1 WBLST60TLNW stringer

1 WBTSC60TLNW top support rails (pair)

1 NW0600-0402N-F6RGBB Easy-Order cabinet pedestal

1 WBTBS-60 workstation back stop

1 IRSS20 instrument riser support

1 IRSS20/15instrument riser support

1 PS6012plastic laminate riser shelf

1 WBTBS-60 shelf back stop

BBbright blue paint

2

4

3

3

3

3

3

2

2

2

1


lista industrial workbenches - multi-industriel · feature: heavy-duty welded leg one-piece leg...

Documents