lista de lucrĂ ri -...

MINISTERUL EDUCAUNIVERSITATEA “VALAHIA” din TARGOVISTE

LISTA LUCRĂRILOR PROFESIONALE PROPRII

1. Eugenia Minca, Adrian Filipescu, Alina Voda, Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator, Volume 31, October 2014, Pages 50

2. Minca, E(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation Based Control of a Mechatronics Line Served by Mobile Robot, journal, PTS 1-4 Book Series: Applied Mechanics and Materials Volume: 3211669 DOI:10.4028/www.scientific.net/AMM.321WOS:000324348201027, International Conference on Me(ICMII 2013), MAR 13

3. Eugenia MINCA, METHODES AVANCES DE MODELISATION DES SYSTEMES A EVENEMENTS DISCRETES. APPLICATION A LA SUPERVISION DES SYSTEMES DE PRODUCTION, Editura MatrixRom

4. Eugenia MINCA, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, AUTOMATE. FUNDAMENTE TEORETICE (vol.I), ISBN 978-973-755-565

5. Eugenia MINCA, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR,AUTOMATE. APLICATII (vol.II),755-566-3

6. Minca, E (Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid Model Based Control of Repetitive Processes, 2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013, Conference Title: 9th Asian Control Conference (ASCC), JUN 234673-5769-2; 978-1-4673

7. Minca, Eugenia; Dragomir, Otilia Elena; Dragomir, FlorinEnergy Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control and Automation (WCICA) Location: Jinan, PEOPLSponsor(s): IEEE , Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL

ROMÂNIA MINISTERUL EDUCAȚIEI ȘI CERCETĂRII ȘTIINȚIFICE

UNIVERSITATEA “VALAHIA” din TARGOVISTE

1

LISTA DE LUCRĂRIconf.dr.ing. Eugenia MINCA

RILOR RELEVANTE PENTRU REALIZĂPROFESIONALE PROPRII

, Adrian Filipescu, Alina Voda, Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator, Control Engeneering Practice

, October 2014, Pages 50–62, Editura Elsevier, CEP2014.

(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation Based Control of a Mechatronics Line Served by Mobile Robot, Mechatronics and industrial informatics

4 Book Series: Applied Mechanics and Materials Volume: 3211669 DOI:10.4028/www.scientific.net/AMM.321-324.1666 Published: 2013, Accession Number: WOS:000324348201027, International Conference on Mechatronics and Industrial Informatics (ICMII 2013), MAR 13-14, 2013, ISSN: 1660-9336, ISBN: 978-3-03785-694

METHODES AVANCES DE MODELISATION DES SYSTEMES A EVENEMENTS DISCRETES. APPLICATION A LA SUPERVISION DES SYSTEMES DE

Editura MatrixRom, ISBN 978-973-755-553-3, 2010

, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE. FUNDAMENTE TEORETICE (vol.I), Editura MatrixRom, 2010, 540 pg.(vol.

565-6

, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, CONDUCEREA INTELIGENTA A SISTEMELOR

APLICATII (vol.II), Editura MatrixRom, 2010, 540 pg.(vol.

(Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid Model Based Control of

itive Processes, 2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013, Conference Title: 9th Asian Control Conference (ASCC), JUN 23-26, 2013, Istanbul, TURKEY, ISBN: 978

4673-5767-8, Accession Number: WOS:000333734900084,

; Dragomir, Otilia Elena; Dragomir, Florin, Producer-Energy Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control and Automation (WCICA) Location: Jinan, PEOPLES R CHINA Date: JUL 06Sponsor(s): IEEE , Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL

RI

PENTRU REALIZĂRILE

, Adrian Filipescu, Alina Voda, Modelling and control of an assembly/disassembly Control Engeneering Practice,

(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation Based and industrial informatics

4 Book Series: Applied Mechanics and Materials Volume: 321-324 Pages: 1666-324.1666 Published: 2013, Accession Number:

chatronics and Industrial Informatics 694-9, ICMII2013

METHODES AVANCES DE MODELISATION DES SYSTEMES A EVENEMENTS DISCRETES. APPLICATION A LA SUPERVISION DES SYSTEMES DE

, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin CONDUCEREA INTELIGENTA A SISTEMELOR

, 2010, 540 pg.(vol. I),

, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin CONDUCEREA INTELIGENTA A SISTEMELOR

Editura MatrixRom, 2010, 540 pg.(vol. I), ISBN 978-973-

(Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid Model Based Control of

itive Processes, 2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013, Conference 26, 2013, Istanbul, TURKEY, ISBN: 978-1-

8, Accession Number: WOS:000333734900084, ASCC2013

-Consumer Distributed Energy Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control

ES R CHINA Date: JUL 06-09, 2010, Sponsor(s): IEEE , Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL


AND AUTOMATION (WCICA)Published: 2010, ISI Web of Knowledge ,

8. Minca E, D. Racoceanu, Zerhouni N, Fuzzy Petri nets for monitoring and recovery, Page(s): 4318 - 4323 vol.3, Proceedings. ICRA '03. IEEE International Conference on Robotics and Automation, 2003. ISSN : Number: 7906721, Digital Object Identifier : 2003, Issue Date : 14-19 Sept. 2003;

9. Eugenia Minca, Daniel Racoceanu, Otilia Dragomir,Veronica Stefan, Florin Dragomir, Predictive modelling of the monitoring function. a predictive modelling application for fault states in a manufacturing systemChristchurch, NEW ZEALAND Date: DEC 09INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1Series: IEEE International Conference on Control and AutDOI: 10.1109/ICCA.2009.5410578

10. Minca, E(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line SRobot with Manipulator, PROCEEDINGS OF THE 2013 IEEE 8TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA) Book Series: IEEE Conference on Industrial Electronics and Applications Pages: 1296WOS:000326679200237, Title: 8th IEEE Conference on Industrial Electronics and Applications (ICIEA2013), JUN 19-21, 2013, Melbourne, AUSTRALIA, ISBN: 978978-1-4673-6320-4, ICIEA2013

TEZE DE DOCTORAT

T1) “CONTRIBUTII LA MONIT

VEDEREA OPTIMIZARII

COMANDA NUMERICA

Tehnologice, Universitatea Politehnica Bucuresti, 2002

Director științific : prof. Dorin Alexandru, Facultatea de Ingineria Sistemelor TehnologicePolitehnica Bucure

T2) “CONTRIBUTION A LA RESEAUX DE PETRI FLOd’Automatique de Besançon (UMR CNRS 6596), UNIVERSITE de FrancheComté, Spécialité

Director științific : prof. Maintenance et Laboratoire d’Automatique de Besançon

CARȚI SI CAPITOLE ÎN CAR

METHODES AVANCES DE MODELISATION DES SYSTEMES A EVENEMENTS DISCRETES. APPLICATION A LA SUPERVISION DES



2

AND AUTOMATION (WCICA) Pages: 1668-1673 DOI: 10.1109/WCICA.2010.5554783 Published: 2010, ISI Web of Knowledge , WCICA 2010

, Zerhouni N, Fuzzy Petri nets for monitoring and recovery, 4323 vol.3, Proceedings. ICRA '03. IEEE International Conference on Robotics

ISSN : 1050-4729, Print ISBN: 0-7803-7736-2, INSPEC Accession Digital Object Identifier : 10.1109/ROBOT.2003.1242268

19 Sept. 2003; pp. 4318-4323, Taipei,Taiwan. ICRA 2003

, Daniel Racoceanu, Otilia Dragomir,Veronica Stefan, Florin Dragomir, Predictive modelling of the monitoring function. a predictive modelling application for fault states in a manufacturing system, IEEE International Conference on Control and Automation LoChristchurch, NEW ZEALAND Date: DEC 09-11, 2009, Sponsor(s): IEEE , Source: 2009 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1Series: IEEE International Conference on Control and Automation ICCA Pages: 1487DOI: 10.1109/ICCA.2009.5410578 Published: 2009, ISI Web of Knowledge; ICCA 2009

(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line SRobot with Manipulator, PROCEEDINGS OF THE 2013 IEEE 8TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA) Book Series: IEEE Conference on Industrial Electronics and Applications Pages: 1296-1301 Published: 2013, Accession NumbeWOS:000326679200237, Title: 8th IEEE Conference on Industrial Electronics and Applications

21, 2013, Melbourne, AUSTRALIA, ISBN: 978-1-4673ICIEA2013

CONTRIBUTII LA MONITORIZAREA SI OPTIMIZAREA PROCESULUI DE AS

VEDEREA OPTIMIZARII PROCESULUI DE PRELUCRARE PE MASINI UNELTE CU

COMANDA NUMERICA”, Facultatea de Ingineria şi Managementul Sistemelor Universitatea Politehnica Bucuresti, 2002

: prof. Dorin Alexandru, Facultatea de Ingineria ş

Sistemelor Tehnologice, Catedra de Maşini şi Sisteme de ProducţBucurești.

CONTRIBUTION A LA SUPERVISION DES SYSTEMES DE PRODUCTION ARESEAUX DE PETRI FLOUS : APPLICATION A LA E-MAINTENANCEd’Automatique de Besançon (UMR CNRS 6596), UNIVERSITE de FrancheComté, Spécialité : Automatique et Informatique, 2005

: prof. Noureddine Zerhouni, responsabilul echipei Ingénierieet E-maintenance din cadrul Université de Frache Comte

Laboratoire d’Automatique de Besançon

ÎN CARȚI


DOI: 10.1109/WCICA.2010.5554783

, Zerhouni N, Fuzzy Petri nets for monitoring and recovery, Volume: 3, 4323 vol.3, Proceedings. ICRA '03. IEEE International Conference on Robotics

INSPEC Accession 10.1109/ROBOT.2003.1242268, 10 November

ICRA 2003

, Daniel Racoceanu, Otilia Dragomir,Veronica Stefan, Florin Dragomir, Predictive modelling of the monitoring function. a predictive modelling application for fault states

, IEEE International Conference on Control and Automation Location: 11, 2009, Sponsor(s): IEEE , Source: 2009 IEEE

INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1-3 Book Pages: 1487-1492,

ICCA 2009

(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, PROCEEDINGS OF THE 2013 IEEE 8TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA) Book Series: IEEE Conference

1301 Published: 2013, Accession Number: WOS:000326679200237, Title: 8th IEEE Conference on Industrial Electronics and Applications

4673-6322-8, ISBN:

REA PROCESULUI DE ASCHIERE IN

MASINI UNELTE CU

i Managementul Sistemelor

: prof. Dorin Alexandru, Facultatea de Ingineria şi Managementul i Sisteme de Producţie, Universitatea

EMES DE PRODUCTION A L’AIDE DES MAINTENANCE“, Laboratoire

d’Automatique de Besançon (UMR CNRS 6596), UNIVERSITE de Franche-

Zerhouni, responsabilul echipei Ingénierie de de Frache Comte -



SYSTEMES DE PRODUCTION, 978-973-

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE.

TEORETICBREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura MatrixRom, 2010, 540 pg.(vol.

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE.

(vol.II): EugeniaSTEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura MatrixRom, 2010, 540 pg.(vol. I), ISBN 978

ELEMENTE DE PRODUCTICA,

ISBN 978

TEORIA SISTEMELOR AUTOMATE. FUNDAMENTE TEORETICE SI APLICATII MATLAB, Otilia DRAGOMIR, Florin DRAGOMIR, MINCA, Cristian DUMITRACHE, Editura MatrixRom, 2011, ISBN 978646-2

SISTEME DE CONVERSIE SI ACHIZITII DE DATE, Gabriel PREDUSCA,

Florian I973-8413

INGINERIA REGLARII AUTOMATE. INDRUMAR DE LABORATOR, Florin

Dragomir,

SISTEME OPTIMALE SI ADAPTIVE. Dragomir,

ARTICOLE/STUDII PUBLICATE ÎN REVISTE DE CIRCULAINTERNAȚIONALĂ, INDEXATE ISI

Ris1) Eugenia Mincaassembly/disassembly mechatronics line served by mobile robot with manipulator, Control Elsevier.

Ris2) Minca, EAssembly/Disassembly Mechatronics Line Served by an Autonomous Robotic System, Pages: 13WOS:000333661500002

Ris3) Adrian FILIPESCU,“DiscreteDriving/Steering Wheels”,Book Title: Series ISSN 1876Selected Papers from the 2011 InternatRobotics (ICAR 2

Ris4) Dragomir, O.E. Dragomirsystems,



3

SYSTEMES DE PRODUCTION, Eugenia MINCA, Editura MatrixRom, ISBN -755-553-3, 2010

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE. TEORETICE (vol.I), : Eugenia MINCA, Cristian DUMITRACHE, Iulian BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura MatrixRom, 2010, 540 pg.(vol. I), ISBN 978-973-755-565-6

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE. Eugenia MINCA, Cristian DUMITRACHE, Iulian BREZEANU, Veronica

STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura MatrixRom, 2010, 540 I), ISBN 978-973-755-566-3

ELEMENTE DE PRODUCTICA, Eugenia MINCA, Editura MatrixRom, 2010, ISBN 978-973-755-574-8

IA SISTEMELOR AUTOMATE. FUNDAMENTE TEORETICE SI APLICATII MATLAB, Otilia DRAGOMIR, Florin DRAGOMIR,

, Cristian DUMITRACHE, Editura MatrixRom, 2011, ISBN 978

SISTEME DE CONVERSIE SI ACHIZITII DE DATE, Gabriel PREDUSCA, Florian ION, Alexandru IVAN, Eugenia MINCA, Editura Bibliotheca, 2005, ISBN

8413-19-2

INGINERIA REGLARII AUTOMATE. INDRUMAR DE LABORATOR, Florin Dragomir, Eugenia Minca

SISTEME OPTIMALE SI ADAPTIVE. INDRUMAR DE LABORATOR, Florin Dragomir, Eugenia Minca.

ARTICOLE/STUDII PUBLICATE ÎN REVISTE DE CIRCULA, INDEXATE ISI(Ris)

Eugenia Minca, Adrian Filipescu, Alina Voda, Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator, Control Engeneering Practice, Volume 31, October 2014, Pages 50Elsevier.

Minca, E., A New Approach for the Control OptimizAssembly/Disassembly Mechatronics Line Served by an Autonomous Robotic System, STUDIES IN INFORMATICS AND CONTROL, Volume: 23, Issue: 1, Pages: 13-22, Published: MAR 2014, ISSN: 1220-1766, Accession Number: WOS:000333661500002

Adrian FILIPESCU, Viorel MINZU, Adriana FILIPESCU, “Discrete-Time Sliding-Mode Control of a Mobile Platform with Four Driving/Steering Wheels”, Chapter : Lecture Notes in Electrical Engineering

Title: Advances in Automation and Robotics, Vol.1 Series ISSN 1876-1100, Publisher Springer Berlin Heidelberg. Book Subtitle: Selected Papers from the 2011 International Conference on Automation and Robotics (ICAR 2011), Dubai, December 1–2, 2011

Dragomir, O.E. Dragomir, E Minca, Adaptive control access of standsystems, 2011 2nd International Conference on Advances in Energy Engineering

Editura MatrixRom, ISBN

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE. FUNDAMENTE , Cristian DUMITRACHE, Iulian

BREZEANU, Veronica STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura

CONDUCEREA INTELIGENTA A SISTEMELOR AUTOMATE. APLICATII , Cristian DUMITRACHE, Iulian BREZEANU, Veronica

STEFAN, Florin DRAGOMIR, Otilia DRAGOMIR, Editura MatrixRom, 2010, 540

, Editura MatrixRom, 2010,

IA SISTEMELOR AUTOMATE. FUNDAMENTE TEORETICE SI APLICATII MATLAB, Otilia DRAGOMIR, Florin DRAGOMIR, Eugenia

, Cristian DUMITRACHE, Editura MatrixRom, 2011, ISBN 978-973-755-

SISTEME DE CONVERSIE SI ACHIZITII DE DATE, Gabriel PREDUSCA, , Editura Bibliotheca, 2005, ISBN

INGINERIA REGLARII AUTOMATE. INDRUMAR DE LABORATOR, Florin

INDRUMAR DE LABORATOR, Florin

ARTICOLE/STUDII PUBLICATE ÎN REVISTE DE CIRCULAȚIE

, Adrian Filipescu, Alina Voda, Modelling and control of an assembly/disassembly mechatronics line served by mobile robot with manipulator,

, October 2014, Pages 50–62, Editura

., A New Approach for the Control Optimization of an Assembly/Disassembly Mechatronics Line Served by an Autonomous Robotic

, Volume: 23, Issue: 1, 1766, Accession Number:

Viorel MINZU, Adriana FILIPESCU, Eugenia MINCA, Mode Control of a Mobile Platform with Four

Lecture Notes in Electrical Engineering. , Series Volume 122,

1100, Publisher Springer Berlin Heidelberg. Book Subtitle: ional Conference on Automation and

, Adaptive control access of stand-alone power 2011 2nd International Conference on Advances in Energy Engineering


(ICAEE), 2012/12/31

Ris5) Zemouri R., Filip F., Performances of the Recurrent Neural Network by the Fuzzy MinJournal of Information Science and 69-90, ISSNFI= 0.188

Ris6) Rakotondrabe M. , Ivan A., Stihi V. Noveanu S., of a piezoelectrically actuated microvalveon Applied Physics, Constanta (IBWAP'09), 1221-146X

Ris7) Minca E., reseaux de Petri synchronises flousA, ISSN 1454

Ris8) Minca E., Racoceanu D., Zerhouni N., “analysis using fuzzy Petri netsJournal, SIC vol.11, nr.4, editatat((http://scientific.thomsonreuters.com

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE INTERNAŢIONALE RECUNOSCUTE (CU ISSN SAU ISBN) DIN ŢARĂ ŞI DIN STRĂINĂTATE (BDis),

BDis1) Minca, E(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation

Based Control of a Mechatronics Line Served by Mobile Robot, MECHATRONICS AND INDUSTRIAL INFORMATICS, PTS 1Applied Mechanics and Materials Volume: 321DOI:10.4028/www.scientific.net/AMM.321Number: WOS:000324348201027, International Conference on Mechatronics and Industrial Informatics (ICMII 2013), MAR 13978-3-03785

BDis2) Minca, E(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, PROCEEDINGS OF THE 2013 IEEE 8TH CONFERAND APPLICATIONS (ICIEA) Book Series: IEEE Conference on Industrial Electronics and Applications Pages: 1296Number: WOS:000326679200237, Title: 8th IEEE Conference on Industrial Electronics aAUSTRALIA, ISBN: 978

BDis3) Petrea, G (Petrea, G.); Filipescu, A (Filipescu, A.); Filipescu, A (Filipescu, A., Jr.); Serbencu, A (Serbencu, A.); Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 2013 17TH INTERNATIONAL



4

, Energy Procedia, Volume 14, pages552-557, Publisher Elseiver, /12/31

Zemouri R., Filip F., Minca E., Racoceanu D., Noureddine Z., Performances of the Recurrent Neural Network by the Fuzzy MinJournal of Information Science and Technology (ROMJIST), Vol. 12, No.1, pag

ISSN 1453-8245, 2009, Romania ((http://scientific.thomsonreuters.com

Rakotondrabe M. , Ivan A., Stihi V. Noveanu S., Minca E., “Design and modeliof a piezoelectrically actuated microvalve”, 10th International Balkan Workshop on Applied Physics, Constanta (IBWAP'09), Romanian Journal of Physics

146X, 2009, Romania (http://scientific.thomsonreuters.com

Filip F., Zemouri R, “Approche de la surveillance des systemes par reseaux de Petri synchronises flous”, Proceedings of Romanian Academy, Series

1454-9069, 2008, Romania (http://apps.isiknowledge.com

., Racoceanu D., Zerhouni N., “Monitoring systems modeling and analysis using fuzzy Petri nets”, revista Studies in Informatics and Control

, SIC vol.11, nr.4, editatată de ICI Bucuresti, ISSN http://scientific.thomsonreuters.com).

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE INTERNAŢIONALE RECUNOSCUTE (CU ISSN SAU ISBN) DIN ŢARĂ ŞI DIN

(BDis), INDEXATE ISI

(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation Based Control of a Mechatronics Line Served by Mobile Robot, MECHATRONICS AND INDUSTRIAL INFORMATICS, PTS 1Applied Mechanics and Materials Volume: 321-324 Pages: 1666DOI:10.4028/www.scientific.net/AMM.321-324.1666 Published: 2013, Accession Number: WOS:000324348201027, International Conference on Mechatronics and Industrial Informatics (ICMII 2013), MAR 13-14, 2013, ISSN: 1660

03785-694-9, ICMII2013

(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, PROCEEDINGS OF THE 2013 IEEE 8TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA) Book Series: IEEE Conference on Industrial Electronics and Applications Pages: 1296-1301 Published: 2013, Accession Number: WOS:000326679200237, Title: 8th IEEE Conference on Industrial Electronics and Applications (ICIEA2013), JUN 19-21, 2013, Melbourne, AUSTRALIA, ISBN: 978-1-4673-6322-8, ISBN: 978-1-4673-6320

Petrea, G (Petrea, G.); Filipescu, A (Filipescu, A.); Filipescu, A (Filipescu, A., Jr.); Serbencu, A (Serbencu, A.); Minca, E (Minca, Eugenia); Voda, A (Voda, Alina), Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 2013 17TH INTERNATIONAL

557, Publisher Elseiver,

, Racoceanu D., Noureddine Z., Boosting the Performances of the Recurrent Neural Network by the Fuzzy Min-Max, Romanian

Vol. 12, No.1, pag http://scientific.thomsonreuters.com)

Design and modeling ”, 10th International Balkan Workshop

Romanian Journal of Physics, ISSN http://scientific.thomsonreuters.com)

Approche de la surveillance des systemes par Proceedings of Romanian Academy, Series

http://apps.isiknowledge.com)

Monitoring systems modeling and Studies in Informatics and Control

1220-1766, 2002


(Minca, Eugenia), A Theoretical Approach of the Time Cycle Optimisation Based Control of a Mechatronics Line Served by Mobile Robot, MECHATRONICS AND INDUSTRIAL INFORMATICS, PTS 1-4 Book Series:

324 Pages: 1666-1669 324.1666 Published: 2013, Accession

Number: WOS:000324348201027, International Conference on Mechatronics and 14, 2013, ISSN: 1660-9336, ISBN:

(Minca, Eugenia); Voda, A (Voda, Alina); Filipescu, A (Filipescu, Adrian); Filipescu, A (Filipescu, Adriana, Jr.), Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, PROCEEDINGS

ENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA) Book Series: IEEE Conference on Industrial

1301 Published: 2013, Accession Number: WOS:000326679200237, Title: 8th IEEE Conference on Industrial

21, 2013, Melbourne, 6320-4, ICIEA2013

Petrea, G (Petrea, G.); Filipescu, A (Filipescu, A.); Filipescu, A (Filipescu, A., Jr.); inca, Eugenia); Voda, A (Voda, Alina),

Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 2013 17TH INTERNATIONAL


CONFERENCE ON SYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), Pages: 410Control and Computing (ICSTCC), OCT 11978-1-WOS:000330660500063,

BDis4) Dumitrascu, B (Dumitrascu, B.); Filipescu, A (Filipescu, A.); Petrea, G (Petrea, G.); Minca, ELaser-based Obstacle Avoidance Algorithm for Four Driving/Steering Wheels Autonomous VehicSYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), Pages: 187192, 2013, 17th International Conference System Theory, Control and Computing (ICSTCC), OCT 11978-1-

BDis5) Minca, E (Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid Model Based Control of Repetitive PCONFERENCE (ASCC), 2013, Conference Title: 9th Asian Control Conference (ASCC), JUN 234673-5767

BDis6) Filipescu, A (FiFilipescu, S (Filipescu, S.); control of a processing/reprocessing mechatronics line served by an autonomous robotic system, 2013 4TH IAND ELECTRONICS ENGINEERING (ISEEE), 2013, 4th International Symposium on Electrical and Electronics Engineering (ISEEE), Conference Date: OCT 11ROMANIWOS:000335153400054,

BDis7) E(Minca, E.); Filipescu, A (Filipescu, A.); Voda, A (Voda, A.), New Approach in Control of Assembly/Disassembly Line Served by Robotic Manipulator Mounted on Mobile Platform, 20ROBOTICS AND BIOMIMETICS (ROBIO 2012) Published: 2012, Accession Number: WOS:000321004000046, IEEE International Conference on Robotics and Biomimetics (ROBIO2012), DEC 11ISBN: 978

BDis8) Dumitrascu, B (Dumitrascu, Bogdan); Filipescu, A (Filipescu, Adrian); Minzu, V (Minzu, Viorel); Voda, A (Voda, Alina); Minca, E(Minca, Eugenia), DiscreteTime SlidingVehicle, 203625 Published: 2011, Accession Number: WOS:000312652103146, 30th Chinese Control Conference, JUL 22988-17255

BDis9) Minca, EugeniaDistributed Energy Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control and AutomatiLocation: Jinan, PEOPLES R CHINA Date: JUL 06Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA)10.1109/WCICA.2010.5554783 WCICA 2010



5

CONFERENCE ON SYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), Pages: 410-415, 2013, 17th International Conference System Theory, Control and Computing (ICSTCC), OCT 11-13, 2013, Sinaia, ROMANIA, ISBN:

-4799-2228-4; 978-1-4799-2227-7, Accession Number: WOS:000330660500063, ICSTCC2013

Dumitrascu, B (Dumitrascu, B.); Filipescu, A (Filipescu, A.); Petrea, G (Petrea, G.); Minca, E (Minca, Eugenia); Filipescu, S (Filipescu, S.); Voda, A (Voda, Alina),

based Obstacle Avoidance Algorithm for Four Driving/Steering Wheels Autonomous Vehicle, 2013 17TH INTERNATIONAL CONFERENCE ON SYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), Pages: 187192, 2013, 17th International Conference System Theory, Control and Computing (ICSTCC), OCT 11-13, 2013, Sinaia, ROMANIA, ISBN: 978

-4799-2227-7, Accession Number: WOS:000330660500031,

(Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid Model Based Control of Repetitive Processes, 2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013, Conference Title: 9th Asian Control Conference (ASCC), JUN 23-26, 2013, Istanbul, TURKEY, ISBN: 978-

5767-8, Accession Number: WOS:000333734900084,

Filipescu, A (Filipescu, A., Jr.); Petrea, G (Petrea, G.); Filipescu, A (Filipescu, A.); Filipescu, S (Filipescu, S.); Minca, E (Minca, E.), Discrete modelling based control of a processing/reprocessing mechatronics line served by an autonomous robotic system, 2013 4TH INTERNATIONAL SYMPOSIUM ON ELECTRICAL AND ELECTRONICS ENGINEERING (ISEEE), 2013, 4th International Symposium on Electrical and Electronics Engineering (ISEEE), Conference Date: OCT 11-13, 2013, Conference Location: Dunarea de Jos Univ Galati, Galati, ROMANIA, ISBN: 978-1-4799-2442-4, Accession Number: WOS:000335153400054, ISEEE 2013

E(Minca, E.); Filipescu, A (Filipescu, A.); Voda, A (Voda, A.), New Approach in Control of Assembly/Disassembly Line Served by Robotic Manipulator Mounted on Mobile Platform, 2012 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (ROBIO 2012) Published: 2012, Accession Number: WOS:000321004000046, IEEE International Conference on Robotics and Biomimetics (ROBIO2012), DEC 11-14, 2012, ISBN: 978ISBN: 978-1-4673-2125-9, ROBIO2012

Dumitrascu, B (Dumitrascu, Bogdan); Filipescu, A (Filipescu, Adrian); Minzu, V (Minzu, Viorel); Voda, A (Voda, Alina); Minca, E(Minca, Eugenia), DiscreteTime Sliding-Mode Control of Four Driving-Steering Wheels Autonomous Vehicle, 2011 30TH CHINESE CONTROL CONFERENCE (CCC) Pages: 36203625 Published: 2011, Accession Number: WOS:000312652103146, 30th Chinese Control Conference, JUL 22-24, 2011, Yantai, PEOPLES R CHINA, ISBN: 978

17255-9-2, CCC2011

Minca, Eugenia; Dragomir, Otilia Elena; Dragomir, Florin, istributed Energy Production Systems modeling with a new Approach of

Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control and AutomatiLocation: Jinan, PEOPLES R CHINA Date: JUL 06-09, 2010, Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA) Pages: 166810.1109/WCICA.2010.5554783 Published: 2010, ISI Web of Knowledge WCICA 2010

CONFERENCE ON SYSTEM THEORY, CONTROL AND COMPUTING 5, 2013, 17th International Conference System Theory,

13, 2013, Sinaia, ROMANIA, ISBN: 7, Accession Number:

Dumitrascu, B (Dumitrascu, B.); Filipescu, A (Filipescu, A.); Petrea, G (Petrea, G.); (Minca, Eugenia); Filipescu, S (Filipescu, S.); Voda, A (Voda, Alina),

based Obstacle Avoidance Algorithm for Four Driving/Steering Wheels le, 2013 17TH INTERNATIONAL CONFERENCE ON

SYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), Pages: 187-192, 2013, 17th International Conference System Theory, Control and Computing

13, 2013, Sinaia, ROMANIA, ISBN: 978-1-4799-2228-4; 7, Accession Number: WOS:000330660500031, ICSTCC2013

(Minca, Eugenia); Filipescu, A (Filipescu, Adrian); Voda, A (Voda, Alina), Book Group Author(s): IEEE, A Theoretical Approach of the Generalized Hybrid

rocesses, 2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013, Conference Title: 9th Asian Control Conference

-1-4673-5769-2; 978-1-8, Accession Number: WOS:000333734900084, ASCC2013

lipescu, A., Jr.); Petrea, G (Petrea, G.); Filipescu, A (Filipescu, A.); (Minca, E.), Discrete modelling based

control of a processing/reprocessing mechatronics line served by an autonomous NTERNATIONAL SYMPOSIUM ON ELECTRICAL

AND ELECTRONICS ENGINEERING (ISEEE), 2013, 4th International Symposium on Electrical and Electronics Engineering (ISEEE), Conference Date:

13, 2013, Conference Location: Dunarea de Jos Univ Galati, Galati, 4, Accession Number:

E(Minca, E.); Filipescu, A (Filipescu, A.); Voda, A (Voda, A.), New Approach in Control of Assembly/Disassembly Line Served by Robotic Manipulator Mounted

12 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (ROBIO 2012) Published: 2012, Accession Number: WOS:000321004000046, IEEE International Conference on Robotics

14, 2012, ISBN: 978-1-4673-2127-3,

Dumitrascu, B (Dumitrascu, Bogdan); Filipescu, A (Filipescu, Adrian); Minzu, V (Minzu, Viorel); Voda, A (Voda, Alina); Minca, E(Minca, Eugenia), Discrete-

Steering Wheels Autonomous 11 30TH CHINESE CONTROL CONFERENCE (CCC) Pages: 3620-

3625 Published: 2011, Accession Number: WOS:000312652103146, 30th Chinese 24, 2011, Yantai, PEOPLES R CHINA, ISBN: 978-

Otilia Elena; Dragomir, Florin, Producer-Consumer istributed Energy Production Systems modeling with a new Approach of

Recurrent Synchronized Fuzzy Petri Nets, Book Group Author(s): IEEE, Conference: 8th World Congress on Intelligent Control and Automation (WCICA)

2010, Sponsor(s): IEEE , Source: 2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND

Pages: 1668-1673 DOI: Published: 2010, ISI Web of Knowledge ,


BDis10) Stefan, V (Stefan, Veronica); Stanescu, I (Stanescu, Ioana); Roceanu, I (Roceanu, Ion); Minca, E(Minca, Eugenia); Stefan, A (Stefan, Antonin), Prospective Topography of Mobile Learning Solutions, PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCProceedings of the International, Conference on Virtual learning Pages: 311Published: 2010, Accession Number: WOS:000323685800044, Conference Date: OCT 29-31, 2010, Targu Mures, ROMANIA

BDis11) Zemouri R., Racoceanu D., Zerhouni N, neural network by the Fuzzy MinIntelligent Systems and Automation (CISA’09), 23-25 2009, Tunisia 2009

BDis12) O. Dragomir, F. Dragomir, prognostic toolAutomation (CISA’09), (http://apps.isiknowledge.com

BDis13) AMINCA E., DRAGOMIR O., DRAGOMIR F., ISTUDOR modeling of monitoring functions in hierarchical systemsIEEE, Conference: 17th Mediterranean Conference on Control and Automation Location: Thessaloniki, GREECE Date: JUN 2417TH MEDITERRANEAN CONFERENCE ON CONTROL & AUTOMATION, VOLS 1-3

BDis14) Minca E, Filip F, Racoceanu D, Stefan V, Stefan A, recurrent hierarchical systems modeling. Application to producerdistributed energy production system7th Asian Control Conference (ASCC 2009) Location: Hong Kong, PEOPLES R CHINA Date: AUG 27Syst Soc; Hong Kong Inst EngineerEduc Fdn; Res Grant Council Hong Kong , Source: ASCC: 2009 7TH ASIAN CONTROL CONFERENCE, VOLS 1http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5410578Knowledge,

BDis15) Eugenia MincaDragomir, application for fault states in a manufacturing systemConference on Control and Automation Location: Christchurch, NEW ZEALAND Date: DEC 09INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATVOLS 1-3Automation ICCA Published: 2009, ISI Web of Knowledge;

BDis16) D. Racoceanu, Volume: International Conference on Robotics and Automation, 2003.Print ISBN:Object Identifier : Date : 14-

BDis17) Minca E., Racoceanu D.,production system diagnosis,Cybernetics and Informatics (SCI 2002)/8th International Conference on Information Systems Analysis and Synthesis ISAS 2002), JUL 14



6

Stefan, V (Stefan, Veronica); Stanescu, I (Stanescu, Ioana); Roceanu, I (Roceanu, Ion); Minca, E(Minca, Eugenia); Stefan, A (Stefan, Antonin), Prospective Topography of Mobile Learning Solutions, PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON VIRTUAL LEARNING, ICVL 2010 Book Series: Proceedings of the International, Conference on Virtual learning Pages: 311Published: 2010, Accession Number: WOS:000323685800044, Conference Date:

31, 2010, Targu Mures, ROMANIA; ICVL 2010

R., Racoceanu D., Zerhouni N, Minca E., Filip F., Training the Recurrent neural network by the Fuzzy Min-Max, 2nd Mediterranean Conference on Intelligent Systems and Automation (CISA’09), ISBN 978-0-7354

25 2009, Tunisia (Web of Science),(http://apps.isiknowledge.com

O. Dragomir, F. Dragomir, Minca E., An application oriented guideline for choosing a prognostic tool, 2nd Mediterranean Conference on Intelligent Systems and Automation (CISA’09), ISBN 978-0-7354-0642-1, March 23-http://apps.isiknowledge.com) ; CISA 2009

., DRAGOMIR O., DRAGOMIR F., ISTUDOR I., Advanced methods for modeling of monitoring functions in hierarchical systems, Book Group Author(s): IEEE, Conference: 17th Mediterranean Conference on Control and Automation Location: Thessaloniki, GREECE Date: JUN 24-26, 2009, Source: MED: 2009

MEDITERRANEAN CONFERENCE ON CONTROL & AUTOMATION, Pages: 1114-1119 Published: 2009, MED 2009

, Filip F, Racoceanu D, Stefan V, Stefan A, Advanced methods for recurrent hierarchical systems modeling. Application to producer

ributed energy production systems, Book Group Author(s): IEEE, Conference: 7th Asian Control Conference (ASCC 2009) Location: Hong Kong, PEOPLES R CHINA Date: AUG 27-29, 2009 , Sponsor(s): Asian Control Assoc; IEEE Control Syst Soc; Hong Kong Inst Engineers; Hong Kong Univ Sci & Technol; KC Wong Educ Fdn; Res Grant Council Hong Kong , Source: ASCC: 2009 7TH ASIAN CONTROL CONFERENCE, VOLS 1-3 Pages: 1542-1547 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5410578Knowledge, ASCC 2009

inca, Daniel Racoceanu, Otilia Dragomir,Veronica ragomir, Predictive modelling of the monitoring function. a predictive modelling

application for fault states in a manufacturing system, IEEE International Conference on Control and Automation Location: Christchurch, NEW ZEALAND Date: DEC 09-11, 2009, Sponsor(s): IEEE , Source: 2009 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMAT

3 Book Series: IEEE International Conference on Control and Automation ICCA Pages: 1487-1492 DOI: 10.1109/ICCA.2009.5410578 Published: 2009, ISI Web of Knowledge; ICCA 2009

Minca E, Zerhouni N, Fuzzy Petri nets for monitorinVolume: 3, Page(s): 4318 - 4323 vol.3, Proceedings. ICRA '03. IEEE International Conference on Robotics and Automation, 2003. ISSN : Print ISBN: 0-7803-7736-2, INSPEC Accession Number: Object Identifier : 10.1109/ROBOT.2003.1242268, 10 November 2003,

-19 Sept. 2003; ICRA 2003

Racoceanu D., Zerhouni N., Brezeanu I., Fuzzy based Petri Nets for the production system diagnosis, 6th World Multiconference on Systemics, Cybernetics and Informatics (SCI 2002)/8th International Conference on Information Systems Analysis and Synthesis ISAS 2002), JUL 14

Stefan, V (Stefan, Veronica); Stanescu, I (Stanescu, Ioana); Roceanu, I (Roceanu, Ion); Minca, E(Minca, Eugenia); Stefan, A (Stefan, Antonin), Prospective Topography of Mobile Learning Solutions, PROCEEDINGS OF THE 5TH INTERNATIONAL

E ON VIRTUAL LEARNING, ICVL 2010 Book Series: Proceedings of the International, Conference on Virtual learning Pages: 311-317 Published: 2010, Accession Number: WOS:000323685800044, Conference Date:

Training the Recurrent Mediterranean Conference on

7354-0642-1, March http://apps.isiknowledge.com) ; CISA

An application oriented guideline for choosing a Mediterranean Conference on Intelligent Systems and

-25 2009, Tunisia

dvanced methods for , Book Group Author(s):

IEEE, Conference: 17th Mediterranean Conference on Control and Automation 26, 2009, Source: MED: 2009

MEDITERRANEAN CONFERENCE ON CONTROL & AUTOMATION,

Advanced methods for recurrent hierarchical systems modeling. Application to producer-consumer

s, Book Group Author(s): IEEE, Conference: 7th Asian Control Conference (ASCC 2009) Location: Hong Kong, PEOPLES R

29, 2009 , Sponsor(s): Asian Control Assoc; IEEE Control s; Hong Kong Univ Sci & Technol; KC Wong

Educ Fdn; Res Grant Council Hong Kong , Source: ASCC: 2009 7TH ASIAN Published: 2009,

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5410578, ISI Web of

eronica Stefan, Florin Predictive modelling of the monitoring function. a predictive modelling

, IEEE International Conference on Control and Automation Location: Christchurch, NEW ZEALAND

11, 2009, Sponsor(s): IEEE , Source: 2009 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION,

Book Series: IEEE International Conference on Control and DOI: 10.1109/ICCA.2009.5410578

, Zerhouni N, Fuzzy Petri nets for monitoring and recovery, 4323 vol.3, Proceedings. ICRA '03. IEEE

ISSN : 1050-4729, 7906721, Digital

10 November 2003, Issue

Fuzzy based Petri Nets for the 6th World Multiconference on Systemics,

Cybernetics and Informatics (SCI 2002)/8th International Conference on Information Systems Analysis and Synthesis ISAS 2002), JUL 14-18, 2002,


Orlando, FInformatics, VOL XII, Proceedings 433(http://apps.isiknowledge.com

ARTICOLE/STUDII PUBLICATE ÎN REVISTE DE CIRCULAŢIE INTERNAŢIONALĂ INDEXATE BDI(Rbd)

Rbd1) E. Minca, A Fuzzy Approach of the Optimal Analysis Based of Failure States in Manufacturing SystemsUNIVERSITY OF GALATI 454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

Rbd2) A. Filipescu,Assembly/Disassembly Mounted on Mobile JOS” UNIVERSITY OF GALATI 1221-454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

Rbd3) Minca E., Modelling and optimization of a reversible mechatronics line served bymanipulator mounted on mobile robot, UNIVERSITY OF GALATI 454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

Rbd4) Minca E., General approach for modelling and time cyclassembly/disassembly mechatronics line served by mobile robot with manipulator, THE ANNALS OF “DUNIII, 2012ELECTRONICS, AUTOMATIC CONTROL, INF

Rbd5) Minca E, Dragomir O, Dragomir F, Istudor I, Lucaci G., “Prognosis in Optimal Analysis of Manufacturing SystemsElectrical Engineering Faculty, Vol. 9, nr. 4 (9), (CNCSIS Tip B+), (

Rbd6) Istudor I., Minca E.,Technology Web BasedVol. 9, nr. 4 (9),

Rbd7) E. Mincă, O. Dragomir, F. Dragomir, I. Istudor, “intelligent control of manufacturing systems maintenanceElectrical EngRomania (CNCSIS Tip B+), (

Rbd8) Dragomir F., Dragomir O., with microcontroller PICVol. 9, nr. 2 (9), pg.61(http://journals.indexcopernicus.com

Rbd9) Dragomir F., Iliescu S., Dragomir O., intelligent controlElectric Systems, Oradea (EMES09), Vol.2, Nr.1, pg.97Science and Control



7

Orlando, Florida 6th World Multiconference on Systemics, Cybernetics and Informatics, VOL XII, Proceedings 433-438, 2002 http://apps.isiknowledge.com); SCI 2002

ARTICOLE/STUDII PUBLICATE ÎN REVISTE DE SPECIALITATE DE CIRCULAŢIE INTERNAŢIONALĂ INDEXATE BDI(Rbd)

A Fuzzy Approach of the Optimal Analysis Based of Failure States in Manufacturing Systems (pp. 5-10), THE ANNALS OF “DUNUNIVERSITY OF GALATI FASCICLE III, 2012, VOL. 35, 454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

, E. Minca, A. Filipescu Jr., G. Petrea, Modeling and Control of Assembly/Disassembly Mechatronic Line Served by Robotic Manipulator Mounted on Mobile Platform (pp. 17-22) THE ANNALS OF “DUNJOS” UNIVERSITY OF GALATI FASCICLE III, 2012, VOL. 35, NO. 1, ISSN

454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

Modelling and optimization of a reversible mechatronics line served bymanipulator mounted on mobile robot, THE ANNALS OF “DUNUNIVERSITY OF GALATI FASCICLE III, 2012, VOL. 35, NO. 2, ISSN 1221454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

General approach for modelling and time cycle optimization of an assembly/disassembly mechatronics line served by mobile robot with manipulator, THE ANNALS OF “DUNĂREA DE JOS” UNIVERSITY OF GALATI

2012, VOL. 35, NO. 3, ISSN 1221-454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL, INFORMATICS

, Dragomir O, Dragomir F, Istudor I, Lucaci G., “Fuzzy Petri Networks Used for Prognosis in Optimal Analysis of Manufacturing Systems”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 4 (9), 2009, Romania, (CNCSIS Tip B+), (http://journals.indexcopernicus.com)

Minca E., Stefan V., “Prevision and Warning Systems Using Mobile Technology Web Based”, Scientific Bulletin of Electrical EngiVol. 9, nr. 4 (9), 2009, Romania, ISSN 1843-6188 (CNCSIS Tip B+)

, O. Dragomir, F. Dragomir, I. Istudor, “Advanced methods for optimal intelligent control of manufacturing systems maintenance”, Scientific Bulletin of Electrical Engineering Faculty - UVT, Vol.9, nr.1, ISSNRomania (CNCSIS Tip B+), (http://journals.indexcopernicus.com

Dragomir F., Dragomir O., Minca E., “A fuzzy logic control approach of a motor with microcontroller PIC”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), pg.61-65, ISSN 1843-6188, 2009, Romania (CNCSIS Tip B+), http://journals.indexcopernicus.com)

omir F., Iliescu S., Dragomir O., Minca E., “PV grid connected system with fuzzy intelligent control”, 10th International Conference on Engineering of Modern Electric Systems, Oradea (EMES09), Vol.2, Nr.1, pg.97-101, Journal of Computer Science and Control Systems ISSN1844-6043, Volume: 2; Issue: 1; Start page: 97;

lorida 6th World Multiconference on Systemics, Cybernetics and 438, 2002 (Web of Science),

SPECIALITATE DE CIRCULAŢIE INTERNAŢIONALĂ INDEXATE BDI(Rbd)

A Fuzzy Approach of the Optimal Analysis Based of Failure States in THE ANNALS OF “DUNĂREA DE JOS”

, VOL. 35, NO. 1, ISSN 1221-454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL,

Modeling and Control of Line Served by Robotic Manipulator

THE ANNALS OF “DUNĂREA DE , VOL. 35, NO. 1, ISSN

454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL,

Modelling and optimization of a reversible mechatronics line served by THE ANNALS OF “DUNĂREA DE JOS”

, VOL. 35, NO. 2, ISSN 1221-454X ELECTROTECHNICS, ELECTRONICS, AUTOMATIC CONTROL,

e optimization of an assembly/disassembly mechatronics line served by mobile robot with manipulator,

REA DE JOS” UNIVERSITY OF GALATI FASCICLE 454X ELECTROTECHNICS, ORMATICS

Fuzzy Petri Networks Used for ”, Scientific Bulletin of

, Romania, ISSN 1843-6188

Prevision and Warning Systems Using Mobile ”, Scientific Bulletin of Electrical Engineering Faculty,

6188 (CNCSIS Tip B+)

Advanced methods for optimal ”, Scientific Bulletin of

ISSN 1843-6188, 2, 2009, http://journals.indexcopernicus.com)

A fuzzy logic control approach of a motor drive ”, Scientific Bulletin of Electrical Engineering Faculty,

, Romania (CNCSIS Tip B+),

PV grid connected system with fuzzy ”, 10th International Conference on Engineering of Modern

101, Journal of Computer 6043, Volume: 2; Issue: 1; Start page: 97;


ISSN: 1844(http://journals.indexcopernicus.com

Rbd10) Istudor I., Minca EScientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), 2008, ISSN 1843-6188, Romania (CNCSIS Tip B+), (

Rbd11) F. Dragomir, O.Dragomir, with microcontroller PIC”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), 2008, ISSN 1843(http://journals.indexcopernicus.com

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE INTERNAŢIONALE RECUNOSCUTE (CU ISSN SAU ISBN) DIN ŢARĂ ŞI DIN STRĂINĂTATE (Bdi), IDEXATE

Bdi1) Eugenia Minca, A Generalised Approach Assembly/Disassembly Mechatronics Line Served by Mobile Robot with Manipulator, Proceedings of the 33rd Chinese Control Conference, July 282014, Nanjing, China, pp. pp:3881number CFP:1441A

Bdi2) George Petrea, Adrian Filipescu Jr., modeling based control of an processing/reprocessing mechatronics line an autonomous robotic system, ELECTRICAL AND ELECTRONICS ENGINEERING http://www.aciee.ugal.ro/ISEEE/2013Faculty of Automation, Computer Science, Electrical and Electronics Engineering, 11-13 October, 2013 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6674360

Bdi3) Dumitrascu B., Filipescu, A., Petrea, G. ; Filipescu, S. ; Minca, Eugenia ; Voda, Alina Laser-based obstacle avoidance algorithm for four driving/steering wheels autonomouComputing (ICSTCC), Date of Conference: 11ISBN 978:10.1109/ICSTCC.2013.6688958http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6688958

Bdi4) Petrea G., Filipescu, A. ; Filipescu, A. ; Serbencu, A. ;

Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 17th International Conference System Theory, Control and Computing (ICSTCC), Date of Conference: 11Pages 41010.1109/ICSTCC.2013.6688993http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6688993



8

: 1844-6043, 2009, Oradea (CNCSIS Tip B+), http://journals.indexcopernicus.com)

Minca E., “Software Object-Oriented Analysis and Design Using UML”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), 2008, ISSN

6188, Romania (CNCSIS Tip B+), (http://journals.indexcopernicus.com

F. Dragomir, O.Dragomir, Minca E., “A fuzzy logic control approach of a motor drive with microcontroller PIC”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), 2008, ISSN 1843-6188, Romania (CNCSIS Tip B+), http://journals.indexcopernicus.com)


IDEXATE BDI

, A Generalised Approach to the Temporal Optimisation Cycle of an Assembly/Disassembly Mechatronics Line Served by Mobile Robot with Manipulator, Proceedings of the 33rd Chinese Control Conference, July 282014, Nanjing, China, pp. pp:3881-3886, ISBN:978-988-15638-number CFP:1441A-CDR.(link)

George Petrea, Adrian Filipescu Jr., Eugenia Minca and Adriana Filipescu modeling based control of an processing/reprocessing mechatronics line an autonomous robotic system, THE 4TH INTERNATIONAL SYMPOSIUM ON ELECTRICAL AND ELECTRONICS ENGINEERING http://www.aciee.ugal.ro/ISEEE/2013, Dunărea de Jos” University of GALATI Faculty of Automation, Computer Science, Electrical and Electronics Engineering,

13 October, Digital Object Identifier: 10.1109/ISEEE.2013.66743

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6674360Dumitrascu B., Filipescu, A., Petrea, G. ; Filipescu, S. ; Minca, Eugenia ; Voda, Alina

based obstacle avoidance algorithm for four driving/steering wheels autonomous vehicle,), 17th International Conference System Theory, Control and Computing (ICSTCC), Date of Conference: 11-13 Oct. 2013, Pages 187ISBN 978-1-4799-2227-7, Digital Object Identifier 10.1109/ICSTCC.2013.6688958, ICSTCC 2013 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6688958

Petrea G., Filipescu, A. ; Filipescu, A. ; Serbencu, A. ; Minca, Eugenia ; Voda, Alina, Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 17th International Conference System Theory, Control and Computing (ICSTCC), Date of Conference: 11Pages 410-415, ISBN 978-1-4799-2227-7, , Digital Object Identifier : 10.1109/ICSTCC.2013.6688993, ICSTCC 2013 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6688993

, Oradea (CNCSIS Tip B+),

Design Using UML”, Scientific Bulletin of Electrical Engineering Faculty, Vol. 9, nr. 2 (9), 2008, ISSN

http://journals.indexcopernicus.com)

., “A fuzzy logic control approach of a motor drive with microcontroller PIC”, Scientific Bulletin of Electrical Engineering Faculty,

6188, Romania (CNCSIS Tip B+),


to the Temporal Optimisation Cycle of an Assembly/Disassembly Mechatronics Line Served by Mobile Robot with Manipulator, Proceedings of the 33rd Chinese Control Conference, July 28-30,

-4-2, IEEE Catalog

and Adriana Filipescu - Discrete modeling based control of an processing/reprocessing mechatronics line served by

THE 4TH INTERNATIONAL SYMPOSIUM ON ELECTRICAL AND ELECTRONICS ENGINEERING

rea de Jos” University of GALATI Faculty of Automation, Computer Science, Electrical and Electronics Engineering,

10.1109/ISEEE.2013.6674360, ISEEE

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6674360 Dumitrascu B., Filipescu, A., Petrea, G. ; Filipescu, S. ; Minca, Eugenia ; Voda, Alina

based obstacle avoidance algorithm for four driving/steering wheels s vehicle,), 17th International Conference System Theory, Control and

13 Oct. 2013, Pages 187-192, 7, Digital Object Identifier

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6688958

Minca, Eugenia ; Voda, Alina, Hybrid modelling based control of an processing/reprocessing mechatronics line served by an autonomous robotic system, 17th International Conference System Theory, Control and Computing (ICSTCC), Date of Conference: 11-13 Oct. 2013,

7, , Digital Object Identifier :



Bdi5) E. Minca, A. Filipescu and A. Voda, Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, 8th Conference onIndustrial El6566567 , pp.1296Identifier :http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6566567

Bdi6) E. Minca, A. Filipescu and A. Voda, A Theoretical Approach of the Generalized Hybrid Model Based on the Control of Repetitive ProcessesConference5767-8, INSPEC Accession Number::10.1109/ASCC.2013.6606073http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6606073

Bdi7) E. Minca, A. Filipescu and A. Voda,

Line Served by Robotic Manipulator Mounted on Mobile Platform,The 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO 2012), 978

Bdi8) A. Radaschin, A. Voda,

Assembly/Disassembly Process, 14th IFAC ConfeProblems in Manufacturing, May 23ISBN: 978

Bdi9) Adrian Filipescu, Silviu Filipescu,

Assembly/Disassembly MechMobile Platform, The 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), 18Number CFP 1220A10.1109/ICIEA.2012.6360769http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6360769

Bdi10) A Voda, A Radaschin,

manipulator16th International System Theory, Control and Computing (ICSTCC), Page(s): 1 6 , Conference Location : of Current Version : 2012

Bdi11) E Minca, V Stefan, A Filipescu, A Serbencu, Two approaches in modeling of

assembly/disassembly line with integrated manipulator mounted on mobile platform, 16th International System Theory, ContrPage(s): 1 4534-7, Date of Current Version : 2012; ICSTCC 2012

Bdi12) Dragomir, O.E., Dragomir, F.,

radial basis function (RBF) neural networks8th International Conference on Informatics in Control, Automation and Robotics 2, pp. 409

Bdi13) Minca E., Dragomir O., Dragomir F.,

Appllied to Manufacturing Flexible Lines Served by Collaborative Robots, Pg.



9

A. Filipescu and A. Voda, Hybrid Model Based Control of a Mechatronics Line Served by Mobile Robot with Manipulator, Proceedings of the 2013, IEEE 8th Conference onIndustrial Electronics andApplications, ICIEA 20136566567 , pp.1296-1301, Conference Location :Melbourne, VIC,Identifier :10.1109/ICIEA.2013.6566567 , ICIEA 2013 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6566567

A. Filipescu and A. Voda, A Theoretical Approach of the Generalized Hybrid Model Based on the Control of Repetitive Processes, 2013 9th AsianConference (ASCC), 23-26 June, Istanbul, 2013 , Pages: 1

8, INSPEC Accession Number: 13847803, Digital Object Identifier 10.1109/ASCC.2013.6606073, ASCC 2013 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6606073

A. Filipescu and A. Voda, New Approach in Control of Assembly/Disassembly Line Served by Robotic Manipulator Mounted on Mobile Platform,

2012 IEEE International Conference on Robotics and Biomimetics (ROBIO 2012), 978-1-4673-2126-6/12/$31.00 © 2012 IEEE, ROBIO 2012

A. Radaschin, A. Voda, E. Minca, A. Filipescu, Task Planning Algorithm in Hybrid Assembly/Disassembly Process, 14th IFAC Conference on Information Control Problems in Manufacturing, May 23-25, 2012, Bucharest, ISSN: 1474ISBN: 978-3-902661-98-2, pp. 571-576; INCOM 2012

Adrian Filipescu, Silviu Filipescu, Eugenia Minca, Hybrid System Control of an Assembly/Disassembly Mechatronic Line Using Robotic Manipulator Mounted on Mobile Platform, The 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), 18-20 Julay, 2012, Singapore, pp. 433Number CFP 1220A-CDR, ISBN: 978-1-4577-2117-5; Digital Ob10.1109/ICIEA.2012.6360769., ICIEA 2012 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6360769

A Voda, A Radaschin, E Minca, A Filipescu, Control of automatic robot with guided manipulator integrated into flexible manufacturing system using Hybrid Petri Nets, 16th International System Theory, Control and Computing (ICSTCC), Page(s): 1

, Conference Location : Sinaia, Romania, Print ISBN: 978of Current Version : 13 December 2012, Issue Date : 12-14 Oct. 2012;

, V Stefan, A Filipescu, A Serbencu, Two approaches in modeling of assembly/disassembly line with integrated manipulator mounted on mobile platform, 16th International System Theory, Control and Computing (ICSTCC), Page(s): 1 – 6, Conference Location : Sinaia, Romania, Print ISBN:

7, Date of Current Version : 13 December 2012, Issue Date : ICSTCC 2012

Dragomir, O.E., Dragomir, F., Minca, E., Forcasting of renewable energy load with radial basis function (RBF) neural networks, ICINCO 2011 8th International Conference on Informatics in Control, Automation and Robotics

pp. 409-412, SCOPUS; ICINCO 2011

, Dragomir O., Dragomir F., Enache A., Temporal Recurrent Modelling Appllied to Manufacturing Flexible Lines Served by Collaborative Robots, Pg.

A. Filipescu and A. Voda, Hybrid Model Based Control of a Mechatronics Proceedings of the 2013, IEEE

ectronics andApplications, ICIEA 2013 , art. no. Conference Location :Melbourne, VIC, Digital Object


A. Filipescu and A. Voda, A Theoretical Approach of the Generalized Hybrid 2013 9th Asian Control

e, Istanbul, 2013 , Pages: 1-6, ISBN 978-1-4673-Digital Object Identifier


New Approach in Control of Assembly/Disassembly Line Served by Robotic Manipulator Mounted on Mobile Platform, Proceedings of

2012 IEEE International Conference on Robotics and Biomimetics (ROBIO ROBIO 2012

, A. Filipescu, Task Planning Algorithm in Hybrid rence on Information Control

25, 2012, Bucharest, ISSN: 1474-6670;

, Hybrid System Control of an atronic Line Using Robotic Manipulator Mounted on

Mobile Platform, The 7th IEEE Conference on Industrial Electronics and 20 Julay, 2012, Singapore, pp. 433-438, IEEE Catalog

Digital Object Identifier :


Control of automatic robot with guided integrated into flexible manufacturing system using Hybrid Petri Nets,

16th International System Theory, Control and Computing (ICSTCC), Page(s): 1 - 978-1-4673-4534-7, Date

14 Oct. 2012; ICSTCC

, V Stefan, A Filipescu, A Serbencu, Two approaches in modeling of assembly/disassembly line with integrated manipulator mounted on mobile

ol and Computing (ICSTCC), Sinaia, Romania, Print ISBN: 978-1-4673-

13 December 2012, Issue Date : 12-14 Oct.

of renewable energy load with ICINCO 2011 –Proceedings of the

8th International Conference on Informatics in Control, Automation and Robotics

Temporal Recurrent Modelling Appllied to Manufacturing Flexible Lines Served by Collaborative Robots, Pg. 749


- 754 , 8th Asian Control ConferenceControl Conference, 956056-4-6, Number: 12072609, 18 May 2011CDR; ASCC 2011http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5899165

Bdi14) Dumitrascu B., Filipescu A., Radaschin A., Filipescu A. Jr.,

Sliding Mode Control of Wheeled Mobile Robots, Proceedings of the 8th Asian Control Conference, pp. 771 978-89-956056Number: 12072609,18 May 2011 CEP11832-http://ieeexplore

BDis18) Minca E., Dragomir O., Dragomir F., Radaschin, AssemblyLines and Collaborative Robots Considered as Hierarchical Systems in Temporal Recurrent Modelling, Pg. ISBN: 978Object Identifier : Date of Current Version : IEEE Catalog Number: CFP11496©2011 IEEE;

BDis19) Filipescu, A.; Minzu, V.; Dumitrascu, B.; Filipescu, A.; and discreteIEEE International Conference on Information and Automation (ICIA)Conference Location : ISBN: 978Object Identifier : 6-8 June 2011http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5948958

BDis20) Dumitrascu, B.; Filipescu, A.; Vasilache, C.;

sliding-mode control of four driving/steering wheels mobile platform, Pg. 1081, The Proceedings of 19th IEEE Mediterranean Conference on Control & Automation, pp. 1076 4577-0124-: 10.1109/MED.2011.5983167Issue Date : : 10.1109/MED.2011.5983167http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5983167

BDis21) Dumitrascu, Bogdan; Filipescu, Adrian; Minzu, Viorel; Voda, Alina; Discrete-time slidingvehicle, Pg.(CCC 2011), 988-17255-Number: 12300988, 22-24 July 2011; http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=6001526

BDis22) A. Besançon-Voda, A. Filipescu, I. Susnea, Avoidance of a



10

754 , 8th Asian Control Conference ASCC2011, Proceedings of the 8th Asian Control Conference, Conference Location : Kaohsiung, E-

6, Print ISBN: 978-1-61284-487-9, INSPEC Accession 12072609, Date of Current Version : 20 June 2011,

18 May 2011, Kaohsiung, Taiwan, China, IEEE Catalog Number: CEP11832ASCC 2011

http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5899165

Dumitrascu B., Filipescu A., Radaschin A., Filipescu A. Jr., MincaESliding Mode Control of Wheeled Mobile Robots, Proceedings of the 8th Asian Control Conference, pp. 771 – 776, Conference Location : Kaohsiung,

956056-4-6, Print ISBN: 978-1-61284-487-9, INSPEC Accession 12072609, Date of Current Version : 20 June 2011,

18 May 2011 pp. 749 – 754, Kaohsiung, Taiwan, China, IEEE Catalog Number: -CDR; ASCC 2011


Dragomir O., Dragomir F., Radaschin, Assembly-Disassembly Flexible Lines and Collaborative Robots Considered as Hierarchical Systems in Temporal Recurrent Modelling, Pg. 69 - 74 ; Conference Location :

978-1-61284-698-9, INSPEC Accession Number: 12145322, Object Identifier : 10.1109/WCICA.2011.5970637Date of Current Version : 01 August 2011, Issue Date : IEEE Catalog Number: CFP11496-DVD, ISBN: 978-1-61284©2011 IEEE; WCICA 2011

Filipescu, A.; Minzu, V.; Dumitrascu, B.; Filipescu, A.; Minca, E. Trajectoryand discrete-time sliding-mode control of wheeled mobile robots, Pg. 27IEEE International Conference on Information and Automation (ICIA)Conference Location : Shenzhen, E-ISBN : 978-1-4577

978-1-4577-0268-6, INSPEC Accession Number: 12116415, Object Identifier : 10.1109/ICINFA.2011.5948958, 11 July 2011,

8 June 2011; ICIA 2011 http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5948958

Dumitrascu, B.; Filipescu, A.; Vasilache, C.; Minca, E.; Filipescu, A.; Discretemode control of four driving/steering wheels mobile platform, Pg.

The Proceedings of 19th IEEE Mediterranean Conference on Control & Automation, pp. 1076 – 1081, Conference Location : Corfu, Print ISBN:

-5, INSPEC Accession Number: 12189318, Digital Object Identifier 10.1109/MED.2011.5983167, Date of Current Version :

Issue Date : 20-23 June 2011ISBN: 978-1-4577-0124-5, Digital Object Identifier 0.1109/MED.2011.5983167, 20-23 June 2011, Corfu, Greece;


Dumitrascu, Bogdan; Filipescu, Adrian; Minzu, Viorel; Voda, Alina; time sliding-mode control of four driving-steering wheels autonomous

vehicle, Pg. 3620 - 3625 Proceedings of the 30th Chinese Control Conference (CCC 2011), Conference Location : Yantai, ISSN : 1934-1768,

-9-2, Print ISBN: 978-1-4577-0677-6, INSPEC Accession 12300988, Date of Current Version : 25 August 2011,

24 July 2011; CCC 2011 http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=6001526

Voda, A. Filipescu, I. Susnea, E. Minca, "Control and Obstacle Avoidance of a Mobile Platform Used as Robotic Assistant for Elderly and

ASCC2011, Proceedings of the 8th Asian -ISBN : 978-89-

INSPEC Accession 20 June 2011, Issue Date : 15-

IEEE Catalog Number: CEP11832-


MincaE, Discrete-Time Sliding Mode Control of Wheeled Mobile Robots, Proceedings of the 8th Asian

Kaohsiung, E-ISBN : INSPEC Accession

20 June 2011, Issue Date : 15-IEEE Catalog Number:

.ieee.org/xpl/freeabs_all.jsp?arnumber=5899169

Disassembly Flexible Lines and Collaborative Robots Considered as Hierarchical Systems in Temporal

Conference Location : Taipei, Print 12145322, Digital

10.1109/WCICA.2011.5970637 21-25 June 2011,

61284-700-9/11/$26.00

. Trajectory-tracking trol of wheeled mobile robots, Pg. 27-32, 2011

IEEE International Conference on Information and Automation (ICIA), 4577-0269-3, Print 12116415, Digital

11 July 2011, Issue Date :


.; Filipescu, A.; Discrete-time mode control of four driving/steering wheels mobile platform, Pg. 1076 –

The Proceedings of 19th IEEE Mediterranean Conference on Control & Print ISBN: 978-1-

Digital Object Identifier 11 August 2011,

5, Digital Object Identifier 23 June 2011, Corfu, Greece; MED 2011


Dumitrascu, Bogdan; Filipescu, Adrian; Minzu, Viorel; Voda, Alina; Minca, Eugenia., steering wheels autonomous

Proceedings of the 30th Chinese Control Conference 1768, E-ISBN : 978-

INSPEC Accession 25 August 2011, Issue Date :


, "Control and Obstacle Mobile Platform Used as Robotic Assistant for Elderly and


Disabled", The 6th National ConferenceMay 24

BDis23) A. Radaschin, A. Filipescu, V. Minzu, sequence control by using mobile robots and system information, Pg. 2International Conference on System Theory, Control and Computing (ICSTCC2011), INSPEC Accession Number:November 2011, ICSTCC 2011http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=6085732

BDis24) O. Dragomir, F. Dragomir, short- Automation4577-0124: 10.1109/MED.2011.5982974Issue Date : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5982974

BDis25) Dragomir F, Dragomir OE, Minca E, voltage electrical networks with distributed power from renewable resources606 –(EnergyCon), INSPEC Accession Number: 10.1109/ENERGYCON.2010.57717532011, Issue Date :

BDis26) Minca E., Dragomir O., Dragomir F., detection/diagnosis, The 29th3809 (CCC2010), 6263-6, September 2010Issue Date : http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5524311

BDis27) Minca E., Dragomir O., Dragomir F., Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Pg. 1668 Control & Automation, Jinan, (WCICA2010), Print ISBN:Digital Object Identifier : Date of Current Version : WCICA 2010

BDis28) Minca E.detection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system, 2010 8th IEEE International Conference on Control and Automation (ICCA), Pg. 1456 Xiamen, China, ISBN: 10.1109/ICCA.2010.5524311Issue Date :

BDis29) Dragomir O., Dragomir F.,Using ANFIS PredictorAutomation, Marrakech, pg. 551 Marrakech, Morocco,



11

Disabled", The 6th National Conference on "Control Architectures of Robots", May 24-25, 2011, Grenoble, FRANCE, 2011

A. Radaschin, A. Filipescu, V. Minzu, E. Minca, A. Filipescu Jr., Adaptive dissequence control by using mobile robots and system information, Pg. 2International Conference on System Theory, Control and Computing (ICSTCC2011), Conference Location : Sinaia, Print ISBN:INSPEC Accession Number: 12402814, Date of Current Version : November 2011, Issue Date : 14-16 Oct. 2011 14-16 october, 2011, Sinaia; ICSTCC 2011 http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=6085732

O. Dragomir, F. Dragomir, E. Minca, MLP neural network as load term horizon,Pg. 1265 - 1270 , Mediterranean Conference on Control and

Automation- MED 2011, Conference Location : Corfu, 0124-5, INSPEC Accession Number: 12178648, Digital Object Identifier

10.1109/MED.2011.5982974, Date of Current Version : Issue Date : 20-23 June 2011Corfu, Grecia; MED 2011 http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5982974

Dragomir F, Dragomir OE, Minca E, A fuzzy approach to intelligent control of low voltage electrical networks with distributed power from renewable resources

– 611, 2010 IEEE International Energy Conference and Exhibition (EnergyCon), Conference Location : Manama, Print ISBN:INSPEC Accession Number: 12007899, Digital Object Identifier : 10.1109/ENERGYCON.2010.5771753, Date of Current Version :

Issue Date : 18-22 Dec. 2010; ENERGYCON 2011

, Dragomir O., Dragomir F., Improvement of temporal modeling of recurrent detection/diagnosis, The 29th IEEE Chinese Control Conference, Beijing, pg.38043809 (CCC2010), Conference Location : Beijing, Print ISBN:

6, INSPEC Accession Number: 11572358, Date of Current Version : September 2010Issue Date : 29-31 July 2010; CCC 2010 http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5524311

, Dragomir O., Dragomir F., Producer-Consumer Distributed Energy Production Systems modeling with a new Approach of Recurrent Synchronized Fuzzy Petri Nets, Pg. 1668 - 1673 , The 8 th IEEE World Congress on Intelligent Control & Automation, Jinan, (WCICA2010), Conference Location : Print ISBN: 978-1-4244-6712-9, INSPEC Accession Number:Digital Object Identifier : 10.1109/WCICA.2010.5554783Date of Current Version : 23 August 2010, Issue Date : WCICA 2010

Minca E., Dragomir O., Dragomir F, Improvement of recurrent fuzzy detection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system, 2010 8th IEEE International Conference on Control and Automation (ICCA), Pg. 1456 – 1461, Conference Location : Xiamen, China, ISSN : 1948-3449, E-ISBN : 978-

ISBN: 978-1-4244-5195-1, Digital Object Identifier : 10.1109/ICCA.2010.5524311, Date of Current Version :

Issue Date : 9-11 June 2010; ICCA 2010

Dragomir O., Dragomir F., Guriveau R, Minca E., Medium Term Load Forecasting Using ANFIS Predictor, The 18th IEEE Mediterranean Conference on Control and Automation, Marrakech, pg. 551-556 (MED2010), Conference Location : Marrakech, Morocco, Print ISBN: 978-1-4244-8091-3, Digital Object Identifier

on "Control Architectures of Robots",

, A. Filipescu Jr., Adaptive disassembly sequence control by using mobile robots and system information, Pg. 2-6, The 15th International Conference on System Theory, Control and Computing

Print ISBN: 978-1-4577-1173-2, Date of Current Version : 28

16 october, 2011, Sinaia;


, MLP neural network as load forecasting tool on , Mediterranean Conference on Control and

Corfu, Print ISBN: 978-1-Digital Object Identifier

Date of Current Version : 11 August 2011,


A fuzzy approach to intelligent control of low voltage electrical networks with distributed power from renewable resources, Pg.

611, 2010 IEEE International Energy Conference and Exhibition Print ISBN: 978-1-4244-9378-4, Digital Object Identifier :

Date of Current Version : 19 May ENERGYCON 2011

Improvement of temporal modeling of recurrent IEEE Chinese Control Conference, Beijing, pg.3804-

Print ISBN: 978-1-4244-Date of Current Version : 20

September 2010


Consumer Distributed Energy Production Systems modeling with a new Approach of Recurrent Synchronized

th IEEE World Congress on Intelligent Conference Location : Jinan,

INSPEC Accession Number: 11511343, 10.1109/WCICA.2010.5554783 Issue Date : 7-9 July 2010;

, Dragomir O., Dragomir F, Improvement of recurrent fuzzy detection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system, 2010 8th IEEE International Conference on

Conference Location : -1-4244-5196-8, Print

Digital Object Identifier : f Current Version : 26 July 2010

Medium Term Load Forecasting , The 18th IEEE Mediterranean Conference on Control and

Conference Location : Digital Object Identifier


: 10.1109/MED.2010.5547727MED 2010

BDis30) Minca E., Stefan V., Dragomir O., Dragomir F., Application for manufacturing systems served by collaborative robots monitoring, Pg. 138 Conference on Automation and Logistics, Hong Kong/Macau, pg.138(ICAL2010), 4244-8374-Number: 11556265, Date of Current Version : Issue Date :

BDis31) Minca E., Brezeanu I., Dragomir O., Dragomir F., “Improvement of recudetection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system”, 8th IEEE International Conference on Control & Automation (ICCA'10),3449 E-ISBN: 978Identifier : 2010, Issue Date :

BDis32) Stefan V., Stanescu I., Roceanu I., Stefan A., Minca E., Prospective topography of mobile learning solutions, Virtual learningMethodologies Technologies and Software Solution, Romania,

BDis33) Dragomir O., DrUncertainties using Fuzzy/Possibility Approach, The 14th IEEE International Conference on System Theory and Control, Sinaia,

BDis34) Dragomir F., Dragomir O., on Fuzzy Logic for Low Voltage Electrical Networks with Distributed Power from Renewable Resources”, The 25th European Photovoltaic Solar Energy Conference and Exhibition (25th EU PVSEC) and 5th World Conference on Photovoltaic Energy Conversion (WCPEC

BDis35) Dragomir O., Dragomir F.,Balance on Medium Term, Large Scale Systems: Theory and Applications, Villeneuve d’Ascq, Fran

BDis36) Minca E., Filip F., Zemouri R., Dragomir F., Dragomir O., “hierarchical discrete systems modeling”Information Control Problems in Manufacturing, Moscow, June 3 (INCOM'09), Preprints pg.1650

BDis37) Minca E., Zemouri R., Dragomir F., Dragomir O., “using recurrent synchronized fuzzy Petri Nets”ECC'09, Budapest, Hungary, pg.4775Hungary, (

BDis38) Dragomir O., Gouriveau R., Dragomir F., Problem in Academicals And Industrial Area of Interest”Conference, ECC'09, Budapest, Hungary, pg.15872009, Hungary, ,

BDis39) Minca E., D. Racoceanu, events systems recoveryManagement and control of Production and Logistics, MCPL 2007, Sept 2007, Sibiu, Romania, (Dumitrache, I, Filip, F.G., Bologa, O. Eds) 481-1, pp. 585



12

10.1109/MED.2010.5547727, 12 August 2010, Issue Date : MED 2010

, Stefan V., Dragomir O., Dragomir F., Application for manufacturing systems served by collaborative robots monitoring, Pg. 138 - 143 , The IEEE IntConference on Automation and Logistics, Hong Kong/Macau, pg.138(ICAL2010), Conference Location : Hong Kong and Macau,

-7, Print ISBN: 978-1-4244-8375-4, INSPEC Accession 11556265, Digital Object Identifier : 10.1109/ICAL.2010.5585397

Date of Current Version : 23 September 2010Issue Date : 16-20 Aug. 2010; ICAL 2010

., Brezeanu I., Dragomir O., Dragomir F., “Improvement of recudetection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system”, 8th IEEE International Conference on Control & Automation (ICCA'10),Conference Location : Xiamen, China,

978-1-4244-5196-8, Print ISBN: 978-1-4244-5195-1, Identifier : 10.1109/ICCA.2010.5524311, Date of Current Version:

Issue Date : 9-11 June 2010 , Xiamen, China, ICCA 2010

Stefan V., Stanescu I., Roceanu I., Stefan A., Minca E., Prospective topography of mobile learning solutions, Virtual learning-Virtual Reality. Model and Methodologies Technologies and Software Solution, Romania, 2010

Dragomir O., Dragomir F., Rafael G, Minca E., Reliability Prediction under Uncertainties using Fuzzy/Possibility Approach, The 14th IEEE International Conference on System Theory and Control, Sinaia, 2010

Dragomir F., Dragomir O., Minca E., Olariu N., Iliescu S.S., “Control Solution Based on Fuzzy Logic for Low Voltage Electrical Networks with Distributed Power from Renewable Resources”, The 25th European Photovoltaic Solar Energy Conference and Exhibition (25th EU PVSEC) and 5th World Conference on Photovoltaic

nversion (WCPEC-5), Valencia, 2010

Dragomir O., Dragomir F., Guriveau R., Minca E., Forecasting of Renewable Energy Balance on Medium Term, Large Scale Systems: Theory and Applications, Villeneuve d’Ascq, Franţa (LSS2010), ISBN 978-2-915913-26-2, France,

Filip F., Zemouri R., Dragomir F., Dragomir O., “Advanced methods in hierarchical discrete systems modeling”, The 13th IFAC Symposium on Information Control Problems in Manufacturing, Moscow, June 3 (INCOM'09), Preprints pg.1650-1655, 2009, Russia; INCOM 2009

Zemouri R., Dragomir F., Dragomir O., “Hierarchical systems Monitoring using recurrent synchronized fuzzy Petri Nets”, European Control Conference, ECC'09, Budapest, Hungary, pg.4775-4779, ISBN 978-963

(http://ieeexplore.ieee.org); ECC 2009

Dragomir O., Gouriveau R., Dragomir F., Minca E., “Review of The Prognosis Problem in Academicals And Industrial Area of Interest”, European Control Conference, ECC'09, Budapest, Hungary, pg.1587-1592, ISBN2009, Hungary, , (http://ieeexplore.ieee.org); ECC 2009

D. Racoceanu, Fl. Dragomir, N. Zerhouni, Fuzzy approach in discrete events systems recovery, Preprints of the 4th International Conference on Management and control of Production and Logistics, MCPL 2007, Sept 2007, Sibiu, Romania, (Dumitrache, I, Filip, F.G., Bologa, O. Eds) ISBN

pp. 585-590, 2007, (http://www.ifac-papersonline.net); MCPL 2007

23-25 June 2010;

, Stefan V., Dragomir O., Dragomir F., Application for manufacturing systems 143 , The IEEE International

Conference on Automation and Logistics, Hong Kong/Macau, pg.138-143 Hong Kong and Macau, E-ISBN : 978-1-

INSPEC Accession 10.1109/ICAL.2010.5585397,

23 September 2010

., Brezeanu I., Dragomir O., Dragomir F., “Improvement of recurrent fuzzy detection/diagnosis functions modeling. A temporal modeling application for fault states in a manufacturing system”, 8th IEEE International Conference on Control

Xiamen, China, ISSN: 1948-

1, Digital Object Date of Current Version: 26 July

ICCA 2010

Stefan V., Stanescu I., Roceanu I., Stefan A., Minca E., Prospective topography of Virtual Reality. Model and

2010

agomir F., Rafael G, Minca E., Reliability Prediction under Uncertainties using Fuzzy/Possibility Approach, The 14th IEEE International

rol Solution Based on Fuzzy Logic for Low Voltage Electrical Networks with Distributed Power from Renewable Resources”, The 25th European Photovoltaic Solar Energy Conference and Exhibition (25th EU PVSEC) and 5th World Conference on Photovoltaic

Forecasting of Renewable Energy Balance on Medium Term, Large Scale Systems: Theory and Applications,

2, France, 2010

Advanced methods in , The 13th IFAC Symposium on

Information Control Problems in Manufacturing, Moscow, June 3 - 5, INCOM 2009

Hierarchical systems Monitoring , European Control Conference,

963-311- 0, 2009,

Review of The Prognosis , European Control

ISBN 978-963-311-0,

Fuzzy approach in discrete Preprints of the 4th International Conference on

Management and control of Production and Logistics, MCPL 2007, Sept 2007, ISBN 978-973-739-MCPL 2007


BDis40) Minca E., Racoceanu D., flou, PENTOMNouvelles Technologies en Maintenance, Valenciennes, 282-905725

BDis41) Minca E.,

détectionet Sûreté de Fonctionnement 18France

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE NATIONALE RECUNOSCUTE (CU ISSN SAU ISBN), IDEXATE BDI

Vn1) Filipescu, I. Susnea, V. Minzu, and Bubble Rebound ObstacPg.404SYSTEMS AND COMPUTER SCIENCE, May 24University of Bucharest, Proceedings Vol 1, May 24University of Buc

Vn2) Minca E., Dragomir O., Dragomir F., Racoceanu D., Olariu N., “used for prognosis in optimal analysis of manufacturing systems”International Conference on Control Systems and Computer Science (pg. 21-

Vn3) Dragomir F., Iliescu S., Dragomir O., Controllers: Application to Oil Level Control in a TankConference on Control Systems and Computer Sc4451, pg. 81

Vn4) Dragomir F., DragomirO., Balance ForecastingPetroleum Gas University of Ploiesti 1224-8495, 2009, Romania (CNCSIS Tip B)

Vn5) Minca E., Dragomir O., Dragomir F., Stefan V., “systemsPetroleum Gas University of Ploiesti Bulletin, Vol.LXI, No.3, pg.1531224-8495, 2009, Romania(CNCSIS Tip B)

Vn6) V. Stefan, Minca Eprocess control”17-19 noiembrie 2005, Ed. Bibliotheca Targoviste, pg. 141, Romania

Vn7) Dragomir O., Minca Econtrol systems optimisation”, Engineering

Vn8) Ivan A. , Ivan M., Dragomir F., architecture for interfacing quartz dual mode sensors”



13

, Racoceanu D., Zerhouni N., Approche de la détection par réseau de Petri PENTOM 2003, Congrès International Pluridisciplinaire Performance et

Nouvelles Technologies en Maintenance, Valenciennes, 28905725-51, France

Racoceanu D., Zerhouni N., Brezeanu I., Approche temporelle floue pour la détection QUALITA 2003, 5ème Congrès International Pluridisciplinaire Qualité et Sûreté de Fonctionnement 18-20 mars 2003, ISBN France.

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE NATIONALE RECUNOSCUTE (CU ISSN SAU ISBN), IDEXATE BDI (Vni)

Filipescu, I. Susnea, V. Minzu, E. Minca, A. Filipescu, Jr., Path Following Fuzzy Control and Bubble Rebound Obstacle Avoidance Method of a WMR Mobile Platform, Pg.404-410, CSCS-18, 18th INTERNATIONAL CONFERENCE ON CONTROL SYSTEMS AND COMPUTER SCIENCE, May 24-27, 2011 POLITEHNICA University of Bucharest, Proceedings Vol 1, May 24-27, 2011 POLITEHNICA University of Bucharest; CSCS 18

., Dragomir O., Dragomir F., Racoceanu D., Olariu N., “used for prognosis in optimal analysis of manufacturing systems”International Conference on Control Systems and Computer Science (

-26, ISSN: 2066-4451, 2009, Romania

Dragomir F., Iliescu S., Dragomir O., E. Minca, “Framework for Design of Fuzzy Logic Controllers: Application to Oil Level Control in a Tank”, The 17th International Conference on Control Systems and Computer Science (CSCS17), 4451, pg. 81-86, 2009, Romania

Dragomir F., DragomirO., Minca E., “Artificial Intelligence Techniques for Energy Balance Forecasting”, The 6th Symposium on Process Control, Ploiesti (SPC'09), Petroleum Gas University of Ploiesti Bulletin, Vol.LXI, No.3, pg.301

8495, 2009, Romania (CNCSIS Tip B)

, Dragomir O., Dragomir F., Stefan V., “Optimal analysis of fuzzy manufacturing systems”, The 6th Symposium on Process Control, Ploiesti (SPC'09), Buletinul UP

leum Gas University of Ploiesti Bulletin, Vol.LXI, No.3, pg.1538495, 2009, Romania(CNCSIS Tip B)

Minca E., O. Dragomir, F. Dragomir, “Maintenance model for realprocess control”, International Symposium on Electrical Engineering

19 noiembrie 2005, Ed. Bibliotheca Targoviste, pg. 141, Romania

Minca E., Ivan A., Stefan V., “Artificial intelligence techniques in building control systems optimisation”, International Symposium on Electrical Engineering- ISEE 2005, 2005, ISBN 973-712-101-5, Romania

Ivan A. , Ivan M., Dragomir F., Mincă E., Dragomir O., Petrovici V., architecture for interfacing quartz dual mode sensors” , Proceedings to the 5th

Approche de la détection par réseau de Petri , Congrès International Pluridisciplinaire Performance et

-30 martie 2003, ISBN

Approche temporelle floue pour la , 5ème Congrès International Pluridisciplinaire Qualité

926429984X, Nancy –

ARTICOLE/STUDII PUBLICATE IN PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE NATIONALE RECUNOSCUTE

A. Filipescu, Jr., Path Following Fuzzy Control le Avoidance Method of a WMR Mobile Platform,

18, 18th INTERNATIONAL CONFERENCE ON CONTROL 27, 2011 POLITEHNICA 27, 2011 POLITEHNICA

., Dragomir O., Dragomir F., Racoceanu D., Olariu N., “Fuzzy Petri networks used for prognosis in optimal analysis of manufacturing systems”, The 17th International Conference on Control Systems and Computer Science (CSCS17),

Framework for Design of Fuzzy Logic ”, The 17th International

ience (CSCS17), ISSN: 2066-

Artificial Intelligence Techniques for Energy ”, The 6th Symposium on Process Control, Ploiesti (SPC'09),

Bulletin, Vol.LXI, No.3, pg.301-307, ISSN:

Optimal analysis of fuzzy manufacturing ”, The 6th Symposium on Process Control, Ploiesti (SPC'09), Buletinul UP

leum Gas University of Ploiesti Bulletin, Vol.LXI, No.3, pg.153-157, ISSN:

Maintenance model for real-time ectrical Engineering- ISEE 2005,

19 noiembrie 2005, Ed. Bibliotheca Targoviste, pg. 141, ISBN 973-712-101-5,

rtificial intelligence techniques in building Symposium on Electrical

5, Romania

., Dragomir O., Petrovici V., “Distributed , Proceedings to the 5th


International Symposium on Electrical Engineering 712-101-5, 2005, Romania

Data,

19.05.2015



14

International Symposium on Electrical Engineering -ISEE 2005, 2005, 5, 2005, Romania.

conf.dr.ing. Eugenia MINCĂ

Semnatura,

ISEE 2005, 2005, ISBN 973-

conf.dr.ing. Eugenia MINCĂ

Semnatura,

lista de lucrĂ ri -...

Documents