MICROCONTROLADORESClon Arduino Nano – $15000

14 Digital i/o8 Analog i/o1 Serial transceiver (RX / TX)6 PWM Atmel Atmega328P-AU MCU (32Kb Flash Memory) USB download and power

Support for external 5V ~ 12V DC power supply Support ISP downloadContenido:1x Clon Arduino Nano development board1x USB cable

Clon Arduino Duelmilanove – $20000

14 Digital i/o8 Analog i/o1 Serial transceiver (RX / TX)6 PWM Atmel Atmega328-SMD MCU (32Kb Flash Memory)

USB download and power Support for external 5V ~ 12V DC power supply Support ISP downloadContenido:1x Clon Arduino Duelmilanove development board

Clon Arduino UNO – U$D 22000

14 Digital i/o8 Analog i/o1 Serial transceiver (RX / TX)6 PWM Atmel Atmega328-SMD MCU (32Kb Flash Memory)USB download and power

Support for external 5V ~ 12V DC power supply Support ISP downloadContenido:1x Clon Arduino UNO development board

Arduino UNO Original – U$D 19500

14 Digital i/o8 Analog i/o1 Serial transceiver (RX / TX)6 PWM Atmel Atmega328-SMD MCU (32Kb Flash Memory)USB download and powerSupport for external 5V ~ 12V DC power supply

Contenido:1x Arduino UNO development board

Arduino MEGA Original – $ 28000

54 Digital i/o16 Analog i/o4 Serial transceiver (RX / TX)14 PWM Atmel Atmega2560 MCU (256Kb Flash Memory)

USB download and power Support for external 7V ~ 12V DC power supply Support ISP downloadContenido:1x Arduino MEGA development board1x USB line

SENSORESBH1750FVI Digital Light Sensor Module – $ 9850

Switchable Voltage: 4.5V~6V or 3.3VI2C bus Interface with 2 alternative address (f/s Mode Support)Spectral responsibility is approximately human eye responseWide range and High resolution (1 ~ 65535 lx)Adjustable measurement result for influence of optical window (It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.)The influence of infrared is very small.Small measurement variation (+/- 20%)

Contenido:1x BH1750FVI module1x 4-pin wire

MMA7660 3-Axis Orientation Module – $ 8575

Power supply is flexible: 4.5V~6V or 3.3VDigital Output (I2C): 3.3V TTL (5V compatible)Low Power Current ConsumptionConfigurable Samples per Second from 1 to 120 samples a second.Auto-Wake/Sleep Feature for Low Power ConsumptionTilt Orientation Detection for Portrait/Landscape CapabilityGesture Detection Including Shake Detection and Tap DetectionRobust Design, High Shocks Survivability (10,000 g)

This product contains:1x MMA7660 module1x 4-pin wire

L3G4200D 3-axis Gyroscope Module – $ 13000

3.6V ~6.5V Supply Voltage, typically 5VI2C and SPI interfaces3 Axis MeasurementsAdjustable range (250, 500, 2000 dps)Very sensitive measurements (8.75mdps/LSB)Anti-reverse IIC interface head to prevent again wrong hardware connection.

Contenido:1x L3G4200D module1x 4-pin wire

GY-521-6050 MPU-6050 3-axis Gyroscope + 3-axis Accelerometer Module – $ 15300

Model: MPU-6050 module/ Three-axis magnetic field+ three axis acceleration)Power supply :3-5v (internal low dropout regulator)Communication modes: standard IIC communication protocolThe gyroscope built-in 16bit AD converter, 16-bit data outputAcceleration range: ±2±4±8±16gGyro range: ±250 500 1000 2000 °/sUse of Immersion Gold PCB,Machine welding process to ensure quality standard 2.54mm pin spacing

Contenido:1x GY-521-6050 MPU-6050 module

HC-SR04 Ultrasonic Sensor Module – $ 6275

Voltage: DC5V Static current: less than 2mA Level output: high-5V Level output: the end of 0V Sensor angle: not more than 15 degrees Detection distance: 2cm-450cm

High precision: up to 0.3cm Connection: VCC, trig (control side), echo (receiving end), GNDContenido:1x ultrasonic module

OV7670 Camera Module For Robot – $ 20500

Array Size: 640x480Power Suply: 2.45V - 3.0VI/O voltage: DC 1.7V - 3.0VOutput frequency voltage: 0 ~ 5VOutput Format: YUV/YCbCr4:2:2, RGB, GRB 4:2:2, Raw RGBMax Rate: 30fps

Contenido:1x OV6707 Camera Module

HC-SR501 PIR Motion Sensor Detector Module – $ 5200

Infrared sensor with control circuit boardDetecting Range: Approx. 7m Detecting Angle: Less than 120 degreesWorking Voltage Range: DC 5V- 20VQuiescent Current: Less than 65uALevel Output Voltage: High 3V / Low 0VWorking Temperature: -15 to +70 degrees C

Trigger Method: L unrepeatable trigger / H repeatable triggerContenido:1x HC-SR501 PIR module

TCS3200 Color Recognition Sensor Module – $ 9499

Input voltage: DC 3V-5VOutput frequency voltage: 0 ~ 5VUse bright white LED lightscan be connected directly with Microcontroller Static detection of the measured object colorBest detection distance: 10mm

Contenido:1x TCS3200 Color Recognition Module

Tiny RTC I2C EEPROM & DS1307 Real Time Clock – $ 8450 The DS1307 I2C Real Time Clock chips (RTC)I2C EEPROM Memory 24C32 32KAdopt LIR2032 rechargeable lithium battery, with the charging circuitSolved the problem of DS1307 with battery backup can not read and write.Fully charged, can provide the DS1307 timing for 1 year .Compact design, 27mm * 28mm * 8.4mmLead off clock pin of DS1307 to provide clock signal for MCU .Can be cascaded to other I2C devices

Contenido:1x Tiny RTC module

Joystick Module Sensor – $ 8998

No data

Contenido:1x Joystick module

INTERFACESNokia LCD5110 Module with SD for Arduino – $ 9698

No data

Contenido:1x Nokia LCD module

Keypad & 1602 LCD Shield For Arduino – $ 9000

No data

Contenido:1x LCD module

5.0” ($400) – 4.3” ($380) – 3.2” ($350) – 2.4” ($300) TFT LCD with touch screen

TFT Transmissive Normal White 480x272 pixels with real 480,272 display color Support MVA (Multi-domain Vertical Alignment) wide view display Partial drive function, enabling partially driving an LCD panel at positions specified by user Separate RGB gamma Reduced color mode: 16-colors (3-bits MSB bits mode) Low -power consumption architecture

Contenido:1x TFT LCD module

MP3 Shield for Arduino with USB and SD – $ 23000

Plug in and play for ArduinoControl by Serial UART interface or keys onboard.Directly drive 32ohm headset.On-board Audio Amplifier to drive 3W/4Ω external loudspeaker.32 levels adjustable volume.Support FAT16/FAT32 file system.Support both SD/SDHC card and U-Disk.On board 64MBit SPI-FLASH.

Support copying audio files from SD card or U-Disk to SPI-FLASH. Supporting Sleep Mode. Support 16K~320Kbps MP3 files and 8K~44.1KHz sampling rate WAV files (SPI-FLASH only supports MP3 format)Contenido:1x mp3 shield module

Voice Recognition Module – $ 25690

Voltage:4.5-5.5VCurrent:<40mADigital Interface: 5V TTL level UART interfaceAnalog Interface: 3.5mm mono-channel mic connector + microphone pin interfaceSize: 30mm x 47.5mmThis module can store 15 pieces of voice instruction.

This module is speaker-dependent. If your friend speaks the voice instruction instead of you, it may not identify the instruction.Contenido:1x voice recognition module

Sensor Shield V6 for Arduino – $ 16000 No Data

Contenido:1x Sensor Shield V6

Arduino MEGA Sensor IO Expansion Shield – $ 18000 No Data

Contenido:1x Arduino Mega Sensor Expansion Board

NRF24L01 2.4G Wireless Module – $ 15880 Automatic answering and automatic retransmissionData transmission 1 or 2MbpsSPI interface data rate 0-8Mbps125 optional working channelA very short channel switching time, can be used for frequency hoppingCan accept 5V level inputWorking voltage of 1.9-3.6vContenido:

1x wireless Module

NRF905 433M Wireless Transceiver Module – $ 14000

433 MHz ISM receive and send together, interrupting sign on after transmit-receive completed on 170 channels. TDMA-CDMA-FDMA with Built-in hardware 8/16 CRCWorking voltage 1.9-3.6 V@30mA MAX or 2.5 uA at standby modeReceive sensitivity of -100 dBmSwitch time <650us at transmit-receive modeMaximum transmission power, 10 mw

Built-in SPI interface, strong anti-jamming performanceContenido:1x NRF905 transceiver module 1x Antenna

Mini SI4432 Transmitter through wall 1000 mts Module – $ 8650 Ultra-thin smallStrong ability to penetrateFrequency range: 433.92MHzHigh sensitivity up to -121dBmMaximum output power: 20dBmData transfer rate: 0.123-256kbpsFSK, GFSK and OOK modulation mode1.8-3.6 V power supplyUltra low power off mode and timing wake-up function

The digital received signal strength indicator (RSSI) Automatic antenna matching and bidirectional switch control 64 bytes RX data register (FIFO) Temperature sensing and 8 bit analog to digital converter Integrated voltage regulator Frequency hoppingContenido: SI4432 Module

GPS Shield - Fastrax UP501 – $ 40000

Hardware / Software Serial port support Mini SDcard interface Configurable fix rate, up to 10Hz Supply Voltage 3.3 - 4.2V DC Ultra High Sensitivity: –148dBm (Cold Start Acquisition) –165 dBm (Navigation) Embedded patch antenna 18.4 x 18.4 x 4.2 mm NMEA protocols (default speed: 9600bps) WAAS/EGNOS support

MediaTek MT3329, channel 66 acquisition and 22 tracking Optional Internal back-up battery Contenido:1x GPS Module

W5100 Ethernet Shield (support micro SD card) – $ 15990

Protocolos TCP & UDP – WiznetW5100 – 4 sockets simultaneos

Contenido:1x W5100 Ethernet Shield

ENC28J60 Network Module – $ 6890

Chip board ENC28J60-I/SOWorking freq: 25MHZ crystalNetwork interface: HR911105A3.3 V power supply pin

Contenido:1x ENC28J60 LAN Ethernet Network Board Module

WiShield 3.0, Arduino WiFi module – $ 65998

Compatible with Arduino UNO, Mega, Duemilanove and so onCompatible with most none-Arduino platform with SPI such as PICPower: 5V DCPlug and play solutionIEEE Std. 802.11b/g/n compatibleData Rate: 1 and 2 MbpsEasy access reset button on-board

External antenna with high sensitive 16 Mbit on-board DataFlash, can be used to store webpages, sensor, etc. Extra port to facilitate usage for non-Arduino platform such as PIC. Supports 802.1x, 802.1i security: WEP, WPA-PSK, and WPA-2-PSK. Support AdHoc.Contenido:1x Wifi Shield Module

UART WiFi Network Server/Client Module – $ 42198 Compatible with Arduino UNO, Mega, Duemilanove and so onSupport transparent transmission of serial,and achieve a plug & play serialSupport new AT+instruction set, Which is all based on ASCII format.Support more perfect TCP/IP protocol tack, support DHCP Embed WEB server, and achieve the long-range parameters configuration through wireless network with IE browser.Support more prefect transmission performance,the maximum sending rate can reach to 11KB/s.Interface: 2*4 pins of Interface: HDR254M-2X4RTS/CTS Hardware flow controlSingle 3.3V power supplySupport IEEE802.11b/g wireless standardsSupport two types of wireless networks: Ad hoc and InfrastructureSupport multiple security authentication mechanisms Support multiple network protocols: TCP/UDP/ICMP/DHCP/DNS/HTTPSupport two types of work modes: auto and command

Contenido:1x USB to TTL Module 1x UART – Wifi Module1x 4 pin wire.

4 pin Wireless Master Bluetooth Module – $ 9000

Module will only work on the master mode, can't switchThe master module of matching HC06 only from the slave module, the Master between modules cannot pair connection, Master module woks with 3.3 V level, can directly be connected with various TTL level serial port MCU (5 V MCU please series 1 K resistance) direct connection, set parameters can use the USB MCU

Contenido:1x Wireless Bluetooth Module 1x 4 pin dupont cable

Serial UART Bluetooth Module – $ 14999

EHB is the most powerful Bluetooth module. It supports up to 36 configuring commands (AT commands), which ensures its flexibility in application. And the function is useful, including data encryption, power saving, connection bind, extended I/O interface, RSSI etc. Most importance, it supports both Master Mode and Slave Mode. Also, we add power supply option on this module. It supports both 3.3V and 5V.

Contenido:1x UART Bluetooth Module

L298N Dual Bridge DC stepper Controller Board – $ 6289 Drive chip: L298N dual H bridge driver IC Power supply range VMS: drive + 5 V-35V Peak current Io: 2A/ Bridge Logic Power supply range Vss: 4.5-5.5V Input voltage range: high level 4.5-5.5V low level 0V Maximum power: 20W Direction & Power indicator lights Current detectionContenido:

1x L298N Dual Bridge DC stepper Controller Motor Driver Module

Motor Drive Shield L293D – $ 20000

2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer Can drive 4 DC motors or 2 stepper motors or 2 ServoUp to 4 bi-directional DC motors with individual 8-bit speed selectionThermal protection, can run motors on 4.5V to 36V DC2 external terminal power interface, for seperate logic/motor supplies

Contenido:1x L293D Motor Driver Shield

DC-DC Step-Down or Step-Up Modules – $ 9000

Rectification: Non-synchronous rectification Input voltage: 3V-34V step up or 4-35V step downOutput voltage: 4-35V step up or 1,25-30V step downInput Current: 3A (MAX) Output Current: 2.5A (MAX)

Contenido:1x DC-DC Step up or Step Down Module

Rc Mini Micro 9g Servo SG90 – $ 3000

Operating Speed (4.8V no load): 0.12sec/60 degreesStall Torque : 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V)Dead Band Width: 7usecOperating Voltage:3.0-7.2 VoltsTOWERPROSG-90 Micro ServoAll Nylon GearConnector Wire Length 150MMContenido:

1x Micro Servo 9G

x218650 4200mAh 3.7V Rechargeable Battery + Traveling Battery Charger – $ 14998

CHARGER:The AC adapter easily folds out to charge and pack away Smart charger support charging for two 18650 Li-ion batteries onceLED Indication: Power on, charging, full charge Input: AC 110V ~ 240V, 50 ~ 60Hz (international charger, can be used worldwide) Output: DC 4.2V, 600mA BATTERY:18650 3.7V Rechargeable Lithium BatteryCapacity: 4200mAh Voltage: 3.7V Compatible for bicycle flashlight

Contenido:2x 18650 3.7V 4200mAh rechargeable battery 1x Traveling battery charger

Cada batería adicional cuesta 50,00 y el cargador 49,98