list of mmm projects 2015
DESCRIPTION
List of MMMTRANSCRIPT
ENGG456/7 projects
Rian Dippenaar1. Quantitative analysis of the rate of the delta-to-gamma phase transition in Fe-C alloys2. In situ study of the delta-to-gamma phase transformation in Fe-C alloys
David Hastie#746 Investigation of MOOCs (Massively Open Online Courses) for Engineering#747 The Use of Technology for the Flexible Delivery of Engineering Mechanics#748 Non-Traditional Lecture Delivery for Engineering Subjects#811 Review of Standards for the Accurate Determination of Density of Bulk Solids
Senevi KiridenaStudying engineering design collaborations using network analysis techniquesStudying scientific collaborations (co-authorships) using network analysis techniques
Nano-micro tribological investigation in cold metal manufacturing.Zhengyi JiangDongbin Wei22
Isothermal precipitation of Sulphur inclusions in pipeline steels containing low Mn and high sulphur.Zhixin ChenMark Reid147
Synthesis of new damage tolerant MAX phase materials.David WexlerDruce Dunne152
Synthesis and characterization of dense, high temperature high hardness phases in ternary eutectic systems.David WexlerAndrzej Calka153
The effect of Ti on the morphology of the precipitates formed in the centerline of Nb-Ti containing thin cast slab.Zhixin Chen182The effect of hot working on the precipitation of sulphides in low Mn steels.Zhixin ChenMark Reid183Synthesis of mesopores carbons from organic waste.Zhixin ChenYue Zhao184
Structure and electro-chemical properties of mesopores carbon.Zhixin ChenZaiping Guo188
Benchmarking the Esprit Steel Package in the Field Emission SEM.Zhixin Chen199
Investigating the effects of defect structure on melting.David Wexler213
Synthesis of metallic and ceramic compounds using reactive plasma.Andrzej Calka
The effect of hot working on the precipitation of sulphides in low Mn steels.Zhixin Chen183
Synthesis of mesopores carbons from organic waste.Zhixin ChenYue Zhao184
Surface areas and hydrogen storage of composites with self assembled interconnected nano graphene networks.Zhixin ChenYue Zhao187
Structure and electro-chemical properties of mesopores carbon.Zhixin ChenZaiping Guo188
Benchmarking the Esprit Steel Package in the Field Emission SEM.Zhixin Chen199
Investigating the effects of defect structure on melting.David Wexler213
Synthesis of metallic and ceramic compounds using reactive plasma.
Andrzej Calka232
Reduction of metal oxides in hydrogen plasma.Andrzej Calka233
Rock permeability measurements - Laboratory tests and theory.The effect of cooling rate on the amount of delta ferrite in the HAZ of P92 creep resistant steel.Huijun LiMark Callaghan264
Optimised use of Niobium in the Production of Ferritic Stainless Steel grade 444 for Heavy PlateHuijun Li
The effect of welding parameters on the mechanical properties of laser welds as a function of alloy contentsHuijun Li
Fabrication of microporous/mesoporous films as anode for lithium ion batteries.Zaiping Guo272
TiO2-based nanostructures for energy storage application.Zaiping Guo278
Magnetically recoverable photocatalytic nanocomposite particles for water treatment.Zaiping Guo281
Graphene-based electrode materials for rechargeable lithium batteries.Zaiping Guo282
Computer Based Control System for Advanced Welding Processes.Alexey Pan301Vision Guided Industrial Robot Programming System.Alexey Pan302
Finite element modelling of metal forming process.Kiet Tieu
Computer Based Control System for Advanced Welding Processes.Alexey Pan301
Vision Guided Industrial Robot Programming System.Alexey Pan302
Finite element modelling of metal forming process.Kiet Tieu306
Testing of new lubricant in metal forming.Kiet Tieu307
Micro-Machining of Metals.Devi Saini325
Monitoring of Drilling Operations on Composite Metals.Devi Saini326
New Generation Coatings on Cutting Tools for Machining.Devi SainiYue Zhao327
Tool Wear Monitoring in High Speed Milling Operations.Devi Saini328
Micropollutant removal by unique adsorbent-amended membrane bioreactor (MBR) for safe wastewater reuse.Long NghiemFaisal Hai329
Removal of boron by selective ion exchange.Long Nghiem332
Development and synthesis of superhard thin films on the cutting tools.Yue Zhao340
Plasma treatment of Ti alloy surfaces for medical applications.
Yue Zhao341
Simulation and modelling of surface asperity in metal manufacturing.Zhengyi JiangDongbin Wei397
Comparison of the hot strengths of two plain carbon steels at temperatures in the range conventionally used for coiling thick hot rolled strip products.Ali Dehghan-ManshadiRian Dippenaar401
Effect of cooling rate and stop cooling temperature on the microstructure and strength of plain carbon structural hot rolled strip steels.Nima YazdipourElena Pereloma431
Phase change material (PCM) thermal storage systems for energy efficiency efficiency in commercial and domestic buildings.Zhenjun Ma441
UOW Solar Decathlon House 1 – an intelligent performance monitoring and display system for the Illawarra Flame house.Duane Robinson442
Effect of rolling on the inclusion distribution in high strength pipeline steel.Schambron
447
Formula SAE car - Driver Training and Development.Oliver KennedyRobert Wheway469
Instrumentation development to assist Driver Training.Oliver KennedyRobert Wheway470
FEA Simulation of Millipede Forming.Zhengyi Jiang472
Zhengyi Jiang473
Investigation of Transpired Solar Collectors in the SBRC Building.Zhenjun Ma505
Investigation of human behaviour change on building energy efficiency.Zhenjun Ma507
Role of Nb in dynamic recrystallisation.
Elena Pereloma509
Analysis of strip shape in cold rolling of thin strip.Zhengyi Jiang516
Study on oxidation of stainless steels.Zhengyi JiangDongbin Wei517
Laser Resurfacing of Al-Zn-5%Mg-4%Si Coatings and Microstructural Characterization.Zhixin ChenYue Zhao536
Synthesis and hydrogen storage of composites with self assembled interconnected nano graphene networks.Zhixin Chen538
Surface Characterisation of 55%Al-Zn Coatings.Zhixin ChenYue Zhao539
Laser Resurfacing of Al-Zn-5%Mg-4%Si Coatings and Microstructural Characterization.Zhixin ChenYue Zhao540
UOW Solar Decathlon House 3 - Design and Optimization of a Photovoltaic Thermal (PVT) solar system.Zhenjun Ma549
UOW Solar Decathlon House 4 – Air tightness of residential buildings, modelling and measurement of the performance of the Illawarra Flame house.Zhenjun Ma550
Surface Modification of Al-Zn-Mg-Si Coatings for Enhanced Passivation/Corrosion Performance.Yue ZhaoSurface Modification of Al-Zn-Mg-Si Coatings for Enhanced Passivation/Corrosion Performance.Yue Zhao552
Design and operation of the Solar Test Area of the Sustainable Buildings Research Centre (SBRC).Zhenjun Ma553
How accurate is recalled "usual" infrastructure utilisation?Sandra JonesChris Cook557
Infrastructure for healthy ageing.Navjot BhullarChris Cook558
Where are you going on the bus?Sandra Jones
Chris Cook559
A tool for assessing the healthiness of a community.Sandra JonesChris Cook560
Advanced ion sectioning techniques for investigations of hard and ultra-hard materials.David WexlerDarren Attard598
Rail Vehicle wheel cross-section acoustic optimization for rolling noise.Richard Dwight605
Asset management of energy pipeline systems.Richard Dwight606
Rail dampers (tuned mass damper) simulation and programming.Richard Dwight607Management of Energy Pipeline Assets.Richard Dwight608
Mechanics of electified vehicle contact wire systems.Richard Dwight
609
Slurry transport by pipeline with polymer additives.Shuqing YangTing Ren615
Image processing of high speed welding videos.Zengxi Pan630Investigations into the Dustiness of Bulk Materials.Peter WypychDavid Hastie634
Investigations into Pneumatic Conveying Processes using High-Speed Video Technology.Peter WypychDavid Hastie635
Development of Digital Processing of Flow Properties and Design Parameters.Peter WypychDavid Hastie636
Investigations into the Effect of Moisture on Product Flowability.Peter WypychDavid Hastie637
Investigations into Bulk Material Wall Friction using new Shear Testers.Peter WypychDavid Hastie638
3D-CAD Design and Construction of Pneumatic Conveying Plant.Peter WypychDavid Hastie639
Design and optimal control of building ventilation systems integrated with phase change material storage tank.Zhenjun Ma641
Production of FeAl alloy by reduction of bauxite ore.Guangqing Zhang644
Interaction of New Zealand Sand with other components during sintering.Guangqing ZhangBrian Monaghan646
Softening and melting of iron ore sinter containing New Zealand Sand.Guangqing ZhangBrian Monaghan648
In-depth reduction of iron ore and sinter.Guangqing Zhang
Brian Monaghan649
Sustainable Design with Building Information Model (BIM).Lan Ding651
Alternative technology of titanium production.Guangqing Zhang658
Modification of system parameters for optimisation of complex metallic components by means of Selective Laser Melting.Stephen BeirneGeoff Spinks663
Optimisation and Prototype Testing of Triples Clip-On Equipment.Guenter Arndt664
Design and construction of concrete-filled steel tubular structures (trusses, bridges).711
Engineering Project TenderingTom Goldfinch712
Desiliconisation in the BOSBrian MonaghanRay Longbottom745
Investigation of MOOCs (Massively Open Online Courses) for EngineeringDavid Hastie746
The Use of Technology for the Flexible Delivery of Engineering MechanicsDavid Hastie747
Non-Traditional Lecture Delivery for Engineering SubjectsDavid Hastie748
Development of a Rotating Wear Tester for Bulk Materials ApplicationsDavid Hastie749
Friction and wear tests of high speed steel work roll material on a high temperature wear test rigKiet Tieu750
Cold rolling of ultra thin foils with asymmetric rollingKiet Tieu751
Synthesis of hardmetals by Electric Discharge Assisted Mechanical Milling.Andrzej Calka752
Electron Microscopy Techniques for Materials CharacterisationElena Pereloma
755
Process modelling and simulationSenevi Kiridena756
Profiling project complexitySenevi Kiridena757
Business model researchSenevi Kiridena758
Organisation evaluation and adoption of technological innovationsSenevi Kiridena759Network analysis of supply chainsSenevi Kiridena760
Network analysis of inovation diffusionSenevi Kiridena761
The Sensitivity of Scale-up of Bulk Material Tests for Determination of Simulation ParametersDavid HastiePeter Wypych762
Comparison of industry robot and CNC machine for machining applicationsZengxi Pan768
Automatic seam identification in robotic weldingZengxi Pan769
Sensor fusion and CAD matching using 3D scannerZengxi Pan770
Weld modelling for additive manufacturingZengxi Pan771
Investigating the Sensitivity of the Australian Standard Dustiness TesterDavid HastiePeter Wypych772
Development of a hydraulics program for gas pipelineCheng Lu773
FEM simulation of Charpy testCheng Lu774
CFD modelling of the decompression process of Hydrogen pipelineCheng Lu
775Charpy test of high toughness line pipe steelCheng Lu776
Nanoindentation test of ultrafine grained aluminiumCheng Lu777
Tensile test of high toughness line pipe steelCheng Lu778
Design of connections for deconstructionLip Teh779
Strengthening steel structures for increased loading and/or retrofittingLip Teh780
Formulation of versatile and efficient 3D beam element for advanced analysis of steel framesLip Teh781
Modelling of materials manufacturingZhengyi Jiang782
Production of aluminum matrix composite reinforced with SiCZhengyi Jiang
Zhixin Chen783
Characterisation of resin coatings on steel by nanoindentation and nanoscratchHongtao Zhu785Rolling Mechanics in the Manufacture of Ultra Thin FoilsHongtao Zhu786
Computational fluid dynamics (CFD) of slurry motion in a pipelineHongtao Zhu787
Battery Management System for electric vehiclesHongtao Zhu788
Wheel-Rail Rolling Contact FEM ModelsHongtao Zhu789
MTTS Innovation Proposal for MUGAGuenter Arndt790
Dynamic simulation of electro-hydraulic system to reduce pressure fluctuations in a mine spray systemStephen Van Duin791
Automated spray applicator with integrated fibre reinforcement for strata confinement in underground coal mines
Stephen Van Duin792
Autonomous wall-following robotic manipulator for consistent sprayed coating thickness onto irregular surfacesStephen Van Duin793
Control system refinements for an automatically reciprocating high pressure pumpStephen Van Duin794