liquid rubber is the world’s only epdm rubber in liquid form. liquid rubber provides a seamless,...
TRANSCRIPT
EPDM LIQUID RUBBER® PRODUCTS
• Liquid Rubber is the world’s only EPDM rubber in liquid form.
• Liquid Rubber provides a seamless, single coat roof coating that can be applied up to 6 times thicker than your standard elastomeric.
• Liquid rubber is ideal for recoating EPDM roof membranes, troweled concrete, weathered metal roofing, foam, weathered siding and more!
• Liquid Rubber will withstand ponding water or immersion indefinitely
• Liquid Rubber can be installed over lightly rusted surfaces without a primer.
• Uncured Liquid Rubber will not be damaged by freezing temperatures.
• Now Available in a Low VOC Version
• Complies with South Coast Air Quality Management District
• Can be applied over rubber, metal, fiberglass, fabric and concrete
• Suitable for ponding water or continuous total immersion
• One Coat Application• Available in White• Packaged in 5 gallon
pails and 1 gallon cans with the catalyst included.
• EPDM Rubber Sealant is a trowelable two component 100% EPDM product
• It is liquid applied and cures at ambient temperatures.
• It is designed for use as a heavy duty sealant to protect against water intrusion on protective enclosures
• As a formed in place tank liner for chemical resistance
• Or to create custom gaskets to seal out water and a wide range of chemicals and acids in specialized equipment.
Original Sheet EPDM Roof
Recoated with EPDM Liquid
Rubber®
Concrete Storage Tank Originally Coated with an Elastomeric and Recoated with ProFlex Primer® and EPDM Liquid Rubber®
BeforeProFlex Primer
Applying Liquid Rubber
AFTER
• Liquid Rubber is Now Available in a Low VOC Version
• Complies with South Coast Air Quality Management District
• Can be applied over rubber, metal, fiberglass, fabric and concrete
• Suitable for ponding water or continuous total immersion
• One Coat Application• Available in White• Packaged in 5 gallon pails and 1
gallon cans with the catalyst included.
EPDM Rubber Sealant is a trowelable two component 100% EPDM product that has a convenient 1 to 1 volume mix ratio and a 3-4 hour pot life.
The EPDM Chemistry is “designed” to tolerate harsh environments – temperatures from -60°F to 400°F; climates from dry desert to tropical rainforests and marine; immersion in many solvents, salt, caustic and acidic solutions.
Suitable for use in extreme environments and will tolerate: High humidity, live steam and total immersion High salt concentrations - Alcohols and Polar solvents Many acids up to 50% concentrations - Liquids with a pH up to 12
Acceptable Substrates for Liquid Rubber Application “Liquid Rubber is designed to recoat structurally sound existing roof and protective materials. They should not be used in place of roofing membranes”.
Recommended substrates to coat: Metal – Coated or Galvanized Steel Weathered Aluminum Weathered CopperEPDM Rubber membraneConcrete (except foot traffic surfaces)Urethane FoamFiberglassPVC Sheet and PipeAcrylic SheetSponge Rubber insulation
Pro Guard Coatings Products are Available
Worldwide
1 INDUSTRIAL WAYP.O. BOX 289DENVER, PA 17517717-336-7900800-735-4399