Every Channel CheckedQuickly and Conveniently

Liqu

id H

andl

ing

Calib

ratio

n De

vice

s

In the tightest spaceMCP1-S, with its extremely compact racks of liquid containers, is a great space saver. Every container is transported automatically and placed on the weighing pan individually.

... and single-channel pipettesSimply swap the 12-channel transport carriage with the supplied glass evaporation trap and calibrate your single-channel pipettes in a trice. Two in one - fast and simple.

For multi-channel pipettes...Calibrate all your multi-channel pipettes with a dispensed volume of ≥ 10 µl with the MCP1-S from METTLER TOLEDO. Check 12 channels at a time in a single step – practical, quick and ISO 8655-compliant.Suitable for both right-handed and left-handed people.

MCP1-S Pipette Calibration SystemFor single- and multi-channel pipettes

MCP1-S is the ideal solution for simple and cost-effective calibration of all single-channel and multi-channel pipettes at your workplace. Every individual channel in an 8 or 12-channel pipette is checked separately in the shortest possible time. On a conventional balance, under ISO 8655 up to 360 measurements must be taken; MCP1-S needs just 30! The fully automatic process makes calibration more ergonomic and up to 10 times faster than with a conventional analytical balance.The highly compact system is a great space saver and weighs just 8 kg. It is supplied in a solid case so that all the components can be transported safely.

MCP1-S increases your calibration productivity and guarantees reliable values – the ideal solution for calibrating single-channel and multi-channel pipettes.

Fast Data ManagementThe Calibry software optimizes the calibration of all pipettes according to ISO 8655. Optimal data management and full traceability is guaranteed – ready for 21 CFR Part 11.

220

mm

91 m

m

177 mm

296

mm

160 mm

88 mm

171 mm

164

mm

SpecificationsNumber of channels up to 12

Container volume 12 x 16 ml with fill level warning

Evaporation trap integrated

Readability 0.01 mg

Maximum capacity 101 g

Repeatability (s) 0.02 mg

Stabilisation time (typical) 5 s

Dimensions of analysis device and motor control (LxWxH in mm)

220x177x91

Dimensions of measuring unit (LxWxH in mm)

296x171x164

Weight 8 kg, 15 kg including carrying case and accessories

MCP1-S Pipette Calibration SystemOrdering information and accessories

MCP1-S (incl. evaporation trap, multi-channel set, calibration set, one channel pump and carrying case) 11138007

4-channel exhaust pump 11138252

Glass tubes (set of 5) 11138253

Water reservoir (25 units) 17007543

Water reservoir (50 units) 17007544

FACT – Fully automatic internal adjustment.

Technical data

MCP1-S Pipette Calibration SystemFor single- and multi-channel pipettes

Highly compact and ideal for all situationsWhether used for analysis, quality control or in a diagnostic laboratory, the MCP1-S system is always right! With its elegant carrying case, it is easy to transport and ready for use in just a few minutes.

Safe and sound - with the MCP1-S Pipette Calibration System

Subject to technical changes©05/2007 Mettler-Toledo AGPrinted in Switzerland 11795689

Quality certificate ISO9001Environment certificate ISO14001Internet: http://www.mt.comWorldwide service

www.mt.com/mcp For more information

Supplied as standard• Single-channel set with 20 ml evaporation trap• Multi-channel set for up to 12 channels (12x16ml)• Calibration set with E2 OIML certified 20g weight• Carrying case• Exhaust pump• Reservoir for collecting the test fluid