linux embedded hardware
DESCRIPTION
Accelerate your development with All-In-One Emblitz ARM11 Development board with 7” touch screen. Supports: Linux, WinCE, Android, Ucos ARM11 All-In-One SBC6410 Development kit Highlights: • Source Code for Android2.0, WinCE6.0 and Linux2.6.28 • Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz. • 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC • 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional • 2M Bytes NOR Flash, AMD AM29LV160DB • 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption • SDIO WIFI Module, supporting IEEE802.11b/g • LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD, and 10.4" LCD (7" TFT LCD with standard Package) • Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard, USB 3G Modem. • GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header • One audio input interface (3.5mm audio jack) • One 2-channel audio output interface (3.5mm audio jack) • One 100M Ethernet interface (RJ45) • One USB2.0 Host port (USB A/F type interface) • One USB2.0 Device port (Mini USB type interface) • Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface) • 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage) • Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit) • One 5x2 pins JTAG interface • Seven buttons (Reset, Boot, User defined, On/Off) • One TVOUT • Board Dimension: 116.6 x 76.8 x 17mm • Power supply: +12VSBC6410 Description:SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform. Software:OS Item Feature DescriptionLinux2.6.28 Bootloader u-boot u-boot-1.1.6 Main functions:1. Supporting Nand Flash erase/write/read2. Supporting USB download Image3. Supporting print, set, save Environment Variables4. Supporting memory’s contents display/compare/modify5. Supporting bootm, bootargs setting Sdboot 1. SD Card boot-up and download Image via USB (can replace JTAG)2. Replace booting LOGO Image update Supporting Image update from SD Card or USB Kernel and drivers Version Linux 2.6.28.8 File system Format ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS Drivers DDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 3.5”,4.3” ,7” and 10.4” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DM File System File System Yaffs or NFS File System Function Provided Lib (ALSA -lib, tslib, glibc), udev support Embedded GUI Qtopia 2.2.0 Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager. Network protocol& application Network protocol TCP/IP protocol, Telnet, FTP Client/server, Boa webserver Application H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT Cross compiler Environment 3.3.2 , 3.4.1 , 4.3.3-eabi WinCE6.0 Boot Stepldr Providing Source code and STEPLDR.bin Eboot Providing Source code and EBOOT.binEboTRANSCRIPT
EmBlitz EMBEDDED SYSTEMS
Linux 2.6 Embedded Hardware kit
ARM11 All-In-One SBC6410 Development kit Highlights:
· Source Code for Android2.0, WinCE6.0 and Linux2.6.28
· Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.
· 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC
· 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional
· 2M Bytes NOR Flash, AMD AM29LV160DB
· 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption
· SDIO WIFI Module, supporting IEEE802.11b/g
· LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD, and 10.4" LCD (7" TFT LCD with standard Package)
· Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard, USB 3G Modem.
· GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header
· One audio input interface (3.5mm audio jack)
· One 2-channel audio output interface (3.5mm audio jack)
· One 100M Ethernet interface (RJ45)
· One USB2.0 Host port (USB A/F type interface)
· One USB2.0 Device port (Mini USB type interface)
· Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface)
· 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)
· Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)
· One 5x2 pins JTAG interface
· Seven buttons (Reset, Boot, User defined, On/Off)
· One TVOUT
· Board Dimension: 116.6 x 76.8 x 17mm
· Power supply: +12V
SBC6410 Description:
SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform.
Software:
OS Item Feature Description
Linux2.6.28
Bootloader
u-boot
u-boot-1.1.6 Main functions: 1. Supporting Nand Flash erase/write/read 2. Supporting USB download Image 3. Supporting print, set, save Environment Variables 4. Supporting memory’s contents display/compare/modify 5. Supporting bootm, bootargs setting
Sdboot 1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGO
Image update Supporting Image update from SD Card or USB
Kernel and drivers
Version Linux 2.6.28.8
File system Format ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS
Drivers DDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 3.5”,4.3” ,7” and 10.4” LCD including
Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DM
File System
File System Yaffs or NFS File System
Function Provided Lib (ALSA -lib, tslib, glibc), udev support
Embedded GUI
Qtopia 2.2.0 Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager.
Network protocol & application
Network protocol TCP/IP protocol, Telnet, FTP Client/server, Boa webserver
Application
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT
Cross compiler Environment
3.3.2 , 3.4.1 , 4.3.3-eabi
WinCE6.0 Boot
Stepldr Providing Source code and STEPLDR.bin
Eboot
Providing Source code and EBOOT.bin Eboot main functions: 1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts. 2. USB download: update the image via USB OTG 2.0 3. Format Nand Flash 4. Format BinFS 5. Low-level Format 6. Set boot-up delayed time 7. Booting process bar
Sdboot 1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGO
System Driver 1.3.5” ,4.3”,7” LCD,10.2” and 10.4”(LVDS)
including Touch Screen, TVOUT, LEDs 2. Supporting 16/18/24Bpp 3. Supporting LCD display rotate
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB Device, Serial ports, RTC,GPS, WIFI,IIC,JPEG, SPI,Keyboard, NandFlash, wavedev, CF_ATA, CMM, DMA, DrvLib, MFC, Powerbutton, Powercontrol, UA0
Function
220MB NAND Flash for user
Power Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system support
Application
MFC VideoEncode/decode
Providing Source Code and user manual, supporting MPEG-4/H264/H263/VC-1 and API operation manual
DirectShow Filter
Providing Source Code including: AACDecoderFilter, FrameExtractFilter, MFCDecoderFilter, MP4testcode, mpeg4ip_mp4v2, SsapMP4Parser
JPEG JPEG/JPG encoding and decoding, providing driver and test program.
OpenGL OpenGL ES1.1&2.0, providing source code and user manual
Camera Supporting CMOS Image sensor-ov9650/9653/9655
TCPMP
Hardware decode MPEG-4/H263/H264/VC-1, supporting avi,mp4, m4v, mov, 3gp, flv, MPG. Supporting DIVX, XVID Supporting MP1, MP2, MP3, AC3, AAC more audio kinds.
OFFICE Word, Excel, PowerPoint, PDF,txt, Skype,
Android-2.0
Boot
Version U-boot 1.1.6
Boot Mode Boot Android from SD card, NAND Flash
Image update Support updating image from SD card or USB
Kernel and drivers
Version Linux 2.6.29-Android
Drivers DDR, Flash, Serial ports, RTC, 4.3” and
7” LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, DM9000, IIC,SPI, keyboard, WAVEDEV, DMA, USB device, JPEG, MFC, TV OUT, Rotator, OpenGGES1.1 & 2.0, D3DM
Application Alarm Clock, ASTRO, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader
File System File System Format Yaffs2 (Androidfs-sdk-m5-rc15)
Embedded GUI
Android-2.0 Support file browser, Mediaplayer
Cross compiler Environment
Arm-none-linux-gnueabi
Debug Tools DNW, MoviNAND_Fusing_Tool.exe
Downloads: All-in one ARM11 S3C6410 Development kit DatasheetM 11 SBC6410 Single Board Computer Contents:
One ARM11 SBC6410 with 7” LCD touchscreen module.
One DVD (WinCE 6.0 BSP, Linux BSP, Android, Documents, tools, Schematic Drawing, datasheets) QT environment for application development GTK support, Complete source code for boot loader and example application programs.
one Serial cable (IDC10-to-DB9)
One 12V@2A Power adapter
One USB cable
One Cross Ethernet cable
Warranty: one Year, Delivery: 3 days from the date of payment, Warranty: one year
Payment method: http://www.emblitz.com/embedded
Call: 91 80 23140344, Fax: 91 80 23146229
Mobile: 91 09449104615, 91 09980562847, Email: [email protected]
Visit: www.emblitz.com