linux development kit with arm11
DESCRIPTION
Linux Development kitwith ARM 11 coreProduct number: Ec95849Emblitz Linux ARM11 Highlights:· Source Code for Linux 2.6· Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.· 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC· 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional· 2M Bytes NOR Flash, AMD AM29LV160DB· 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption· SDIO WIFI Module, supporting IEEE802.11b/g· LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD(current stock is available with only 7” TFT touch screen display)· Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 MatrixKeyboard, USB 3G Modem.· GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header· One audio input interface (3.5mm audio jack)· One 2-channel audio output interface (3.5mm audio jack)· One 100M Ethernet interface (RJ45)· One USB2.0 Host port (USB A/F type interface)· One USB2.0 Device port (Mini USB type interface)· Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface)· 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)· Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)· One 5x2 pins JTAG interface· Seven buttons (Reset, Boot, User defined, On/Off)· One TVOUT· Board Dimension: 116.6 x 76.8 x 17mm· Power supply: +12VSBC6410 Description:SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform.Software: OSItemFeatureDescriptionLinux2.6.28Bootloaderu-bootu-boot-1.1.6 Main functions: 1. Supporting Nand Flash erase/write/read 2. Supporting USB download Image 3. Supporting print, set, save Environment Variables 4. Supporting memory’s contents display/compare/modify 5. Supporting bootm, bootargs settingSdboot1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGOImage updateSupporting Image update from SD Card or USBKernel and driversVersionLinux 2.6.28.8File system FormatROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFSDriversDDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 3.5”,4.3” ,7” and 10.4” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DMFile SystemFile SystemYaffs or NFS File SystemFunctionProvided Lib (ALSA -lib, tslib, glibc), udev supportEmbedded GUIQtopia 2.2.0Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager.Network protocol & applicationNetwork protocolTCP/IP protocol, Telnet, FTP Client/server, Boa webserverApplicationH.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUTCross compiler Environment3.3.2 , 3.4.1 , 4.3.3-eabiLinux Development kit with ARM 9 SBC6410 Contents:. One ARM11 SBC6410 Board with 7” touch screen . One CD-ROM (Linux 2.6, Documents, tools, Schematic Drawing, datasheets) . One Serial cable (IDC10-to-DB9) . One 12V@2A Power adapter. One USB cable . One Cross Ethernet cableWarrenty: OneTRANSCRIPT
Linux Development kit with ARM 11 core
Product number: Ec95849
Emblitz Linux ARM11 Highlights:
· Source Code for Linux 2.6
· Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.
· 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC
· 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional
· 2M Bytes NOR Flash, AMD AM29LV160DB
· 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption
· SDIO WIFI Module, supporting IEEE802.11b/g
· LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD
(current stock is available with only 7” TFT touch screen display)
· Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix
Keyboard, USB 3G Modem.
· GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header
· One audio input interface (3.5mm audio jack)
· One 2-channel audio output interface (3.5mm audio jack)
· One 100M Ethernet interface (RJ45)
· One USB2.0 Host port (USB A/F type interface)
· One USB2.0 Device port (Mini USB type interface)
· Four serial ports (Two are five-wire interface, another two are three-wire TTL serial
interface)
· 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)
· Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)
· One 5x2 pins JTAG interface
· Seven buttons (Reset, Boot, User defined, On/Off)
· One TVOUT
· Board Dimension: 116.6 x 76.8 x 17mm
· Power supply: +12V
SBC6410 Description:
SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating
system and application code, and for dedicated video processing. Low voltage Mobile DDR
enables very low power consumption in regular operation and in standby. For embedded
applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports,
I/O lines and other essential functions, while integrated WiFi interface implement industry
standard wireless connectivity.The small size and low power consumption of the SBC6410
allows its integration into hand-held and mobile devices, while its low price makes it an ideal
selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio
significantly better than that of any other platform.
Software: OS
Item Feature Description
Linux2.6.28
Bootloader
u-boot
u-boot-1.1.6 Main functions: 1. Supporting Nand Flash erase/write/read 2. Supporting USB download Image 3. Supporting print, set, save Environment Variables 4. Supporting memory’s contents display/compare/modify 5. Supporting bootm, bootargs setting
Sdboot 1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGO
Image update Supporting Image update from SD Card or USB
Kernel and drivers
Version Linux 2.6.28.8
File system Format
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS
Drivers
DDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 3.5”,4.3” ,7” and 10.4” LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DM
File System
File System Yaffs or NFS File System
Function Provided Lib (ALSA -lib, tslib, glibc), udev support
Embedded GUI Qtopia 2.2.0 Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager.
Network protocol & application
Network protocol
TCP/IP protocol, Telnet, FTP Client/server, Boa webserver
Application
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT
Cross compiler Environment
3.3.2 , 3.4.1 , 4.3.3-eabi
Linux Development kit with ARM 9 SBC6410 Contents: . One ARM11 SBC6410 Board with 7” touch screen . One CD-ROM (Linux 2.6, Documents, tools, Schematic Drawing, datasheets) . One Serial cable (IDC10-to-DB9) . One 12V@2A Power adapter . One USB cable . One Cross Ethernet cable Warrenty: One Year Technical Support: Dedicated team will support for one complete year ASK FOR QUOTE OR FOR MORE DETAILS: Emblitz Technologies Pvt Ltd, #738/33, 12th Main, 3rd Blk, Rajajinagar, Bangalore 560010 India, www.emblitz.com, [email protected] Phones: 90 80 23140344, 90 80 23146229, Mobile: 09449104615 09980562847