link bar • hdmi video inputs: 3 (support 4k uhd, hdmi 2.0)...link bar, puis accrochez-la au mur....

2
• Model No.: LINK BAR • Transducer: 2 x 20mm (0.8”) tweeter, 4x (44x80)mm racetrack driver • Total Maximum Power: 100W • Frequency response: 75Hz-20kHz • Signal-to-noise ratio: >85dBA • Power Supply: 100-240V~50/60Hz • HDMI Video Inputs: 3 (Support 4K UHD, HDMI 2.0) • HDMI Video Output (with Audio Return Channel): 1 (Support 4K UHD, HDMI 2.0) • HDCP Version: 2.2 and 1.4 • Ethernet: 10/100Mbps • Dolby Digital support • Bluetooth version: 4.2 • Bluetooth transmitter frequency range: 2402 – 2480MHz • Bluetooth transmitter power: ≤ 9dBm • Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK • Wi-Fi network: 802.11a/b/g/n/ac (2.4GHz/5GHz) • 2.4G Wi-Fi transmitter frequency range: 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels) • 2.4G Wi-Fi transmitter power: <20dBm • 2.4G Wi-Fi modulation: DBPSK, DQPSK, CCK, QPSK,BPSK,16QAM, 64QAM • 5G Wi-Fi transmitter power: <20dBm • 5G Wi-Fi modulation: QPSK, BPSK, 16QAM,64QAM, 256QAM • 5G Wi-Fi transmitter frequency range: 5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz • 5.8G Wireless transmitter frequency range: 5740-5840MHz • 5.8G Wireless transmitter power: < 8dBm • 5.8G Wireless transmitter modulation: GFSK • Dimensions (W x H x D): 1020 x 60 x 93mm • Gross Weight: 4.4kg • Net Weight: 2.5kg Note: LINK BAR is intended to be used for streaming music. A consumer can stream Bluetooth audio to the speaker. A consumer can connect their speaker to the local Wi-Fi Network and stream music with Google Chromecast. In addition, the speaker will work with Google Home. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi connection must remain active at all times to ensure proper operation. LINK BAR is in compliance with the European Union energy legislation. LINK BAR complies with European Commission Regulation (EC) No 1275/2008 (HiNA and (EU) No 801/2013 as a networked equipment with high network availability equipment and equipment with HiNA functionality). Power consumption: Off Mode: N/A Standby: N/A Network Standby: N/A Time to standby: N/A Active Standby*: 4.0W *Active Standby: LINK BAR is connected to a wireless network but does not provide active audio functions. when LINK BAR is plugged into a wall socket, regardless whether it is muted or not, words "Hey Google" or "Ok Google" it is automatically on active standby mode. It will respond to you if you say the trigger. LINK BAR 1. What’s in the box 3. Connect your LINK BAR 4. Power your LINK BAR and remote control LINK BAR Remote control Power cable* * Power cable types and numbers varied by regions. * Do confirm if HDMI CEC function on your TV is turned on. * AUX or Optical cable purchase separately * TV HDMI cable Wall-mount brackets Product information & wall-mount guide 2b. Wall mount the LINK BAR TV 3a. Connect LINK BAR to your TV by HDMI ARC Use tape to stick the wall-mounted paper guide on the wall, push a pen tip through the center of each mounting hole to mark the wall-mounted bracket location and remove the paper. For complete information about using all of your JBL LINK BAR, download the full Owner's Manual from www.jbl.com Screw the wall mount brackets on the pen mark; screw the threaded mounting post into the back of the LINK BAR, then hook it on the wall. HDMI IN OPTICAL IN OPTICAL OUT AUX-IN AUX-OUT 3b. Connect LINK BAR to other devices AUX cable 2-D=4mm HDMI (ARC) HDMI OUT (TV ARC) HDMI HDMI ≤8 mm/ 0.31" 4mm/0.16" ≥35 mm/1.4" 2 a b a b 1 1 2 3 HDMI OUT 2. Place your LINK BAR 2a. Place the LINK BAR on the table 5. Follow the setup instruction on TV 6c. Remote control 7. Product Specification 1) Microphone 2) TV Power on/off 3) Netflix 4) HDMI (toggle HDMI 1, 2, 3) 5) Optical / Aux (Toggle Optical / Aux) 6) Navigation key / OK 7) Back – Go back to previous screen 8) Google Assistant – press to ask your Google Assistant for help 9) Home – Go to home screen 10) Mute / unmute (for video and music) 11) Volume down / up 12) Bluetooth – switch to Bluetooth mode / pairing Volume down / up PrivacySwitch TM Mic mute / unmute * Source switch between: Home / HDMI (1, 2, 3) / Bluetooth Audio / Optical Audio / Aux Audio 6b. Top panel 6. Control your LINK BAR 6a. Voice control * Make sure using a HDMI cable connect the HDMI OUT (TV ARC) connector on LINK BAR to the HDMI IN (ARC) on your TV Far-field microphones Bluetooth ® Source * 2 3 5 9 4 1 6 7 10 11 8 12 For Remote Control • Bluetooth version: 5.0 • Bluetooth transmitter frequency range: 2402-2480MHz • Bluetooth transmitter power: < 4dBm Welcome Hi, how can i help? Just start with “OK Google” “Turn the TV on” “Search soccer highlights on YouTube” “Dim the lights” “Switch to HDMI 1”

Upload: others

Post on 03-Feb-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • • Model No.: LINK BAR• Transducer: 2 x 20mm (0.8”) tweeter,

    4x (44x80)mm racetrack driver• Total Maximum Power: 100W• Frequency response: 75Hz-20kHz • Signal-to-noise ratio: >85dBA • Power Supply: 100-240V~50/60Hz• HDMI Video Inputs: 3 (Support 4K UHD, HDMI 2.0)• HDMI Video Output (with Audio Return Channel): 1 (Support 4K UHD, HDMI 2.0)• HDCP Version: 2.2 and 1.4• Ethernet: 10/100Mbps• Dolby Digital support• Bluetooth version: 4.2• Bluetooth transmitter frequency range: 2402 – 2480MHz• Bluetooth transmitter power: ≤ 9dBm• Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK • Wi-Fi network: 802.11a/b/g/n/ac (2.4GHz/5GHz)• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472MHz (2.4GHz ISM Band, USA

    11 Channels, Europe and others 13 Channels) • 2.4G Wi-Fi transmitter power:

  • CH_JBL_LINK BAR_QSG_US_SOP_V5

    Chromecast built- in, Google Play and the Google Play logo are trademarks of Google LLC.Chromecast built-in may require subscription(s).The Google Assistant requires an internet connection and is not available in certain countries and languages. Availability and performance of certain features and services are device, service and network-dependent and may not be available in all areas. Controlling certain devices in your home requires compatible smart devices. Subscriptions for services and applications may be required and additional terms, conditions and/or charges may apply. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.The Wi-Fi CERTIFIED™ Logo is a certification mark of the Wi-Fi Alliance®.FCC/IC Radiation Exposure Statement: This equipment complies with FCC/IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.Cet équipement est conforme aux limites d'exposition aux radiationsFCC/ IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

    Торговая марка : JBLНазначение товара : АКТИВНАЯ АКУСТИЧЕСКАЯ СИСТЕМАИзготовитель : ХАРМАН ИНТЕРНЕШНЛ ИНДАСТРИЗ ИНКОРПОРЕЙТЕД, США, 06901 КОННЕКТИКУТ, Г.СТЭМФОРД, АТЛАНТИК СТРИТ 400, ОФИС 1500Страна происхождения : ВьетнамИмпортер в Россию : OOO “ХАРМАН РУС СИАЙЭС“, РОССИЯ, 127018, Г.МОСКВА, УЛ. ДВИНЦЕВ, Д.12, КОРПУС 1Гарантийный период : 1 годИнформация о сервисных центрах : www.harman.com/ru тел. +7-800-700-0467 Срок службы : 5 лет

    Товар сертифицирован : Дата производства : Дата изготовления устройства определяется по двум буквенным обозначениям из второй группы символов серийного номера изделия, следующих после разделительного знака «-». Кодировка соответствует порядку букв латинского алфавита, начиная с января 2010 года: 000000-MY0000000, где «M» - месяц производства (А - январь, B - февраль, C - март и т.д.) и «Y» - год производства (A - 2010, B - 2011, C - 2012 и т.д.).

    Use Restriction: This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in following countries:

    BE EL LT PT BG ES LU RO CZ FR HU SI DK HR MT SK DE IT NL FI EE CY AT SE IE LV PL UK

    Belgium (BE), Greece (EL), Lithuania (LT), Portugal (PT), Bulgaria (BG), Spain (ES), Luxembourg (LU), Romania (RO), Czech Republic (CZ), France (FR), Hungary (HU), Slovenia (SI), Denmark (DK), Croatia (HR), Malta (MT), Slovakia (SK), Germany (DE), Italy (IT), Netherlands (NL), Finland (FI), Estonia (EE), Cyprus (CY), Austria (AT), Sweden (SE), Ireland (IE), Latvia (LV), Poland (PL) and United Kingdom (UK).

    Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

    The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

    This product contains open source software licensed under GPL. For your convenience, the source code and relevant build instruction are also available at http://www.jbl.com/opensource.html. Please feel free to contact us at:

    Harman Deutschland GmbHATT: Open Source, Gregor Krapf-Gunther, Parkring 385748 Garching bei Munchen, Germany

    or [email protected] if you have additional question regarding the open source software in the product.

    FRPour des informations complètes sur la manière d'utiliser toutes vos JBL LINK BAR, téléchargez le Mode d'emploi sur www.jbl.com

    1. Contenu de la boîteTélécommande / Câble d’alimentation* / Câble HDMI / Support mural / Informations relatives au produit et guide de montage mural* Le nombre de câbles d’alimentation varie en fonction des régions

    2. Installer votre LINK BAR2a. Placez la LINK BAR sur une table2b. Vægmontering af LINK BARUtilisez du ruban adhésif pour coller le guide de montage mural en papier sur le mur, passez la pointe d’un crayon au travers pour marquer l’emplacement du support mural et retirez le papier.Vissez le support mural sur la marque de crayon ; vissez la tige de montage à l'arrière de la LINK BAR, puis accrochez-la au mur.

    3. Connecter votre LINK BAR3a. Connectez votre LINK BAR à votre téléviseur via le port HDMI ARC* Vérifiez que la fonction HDMI CEC est activée sur votre téléviseur.

    3b. Connecter la LINK BAR à d'autres appareils* câble AUX ou optique à acheter séparément.

    4. Alimentation et télécommande de votre LINK BAR

    5. Suivez les instructions de réglage de votre téléviseur* Vérifiez que vous utilisez un câble HDMI pour connecter la sortie HDMI (TV ARC) de la LINK

    BAR à l'entrée HDMI (ARC) de votre téléviseur

    6. Contrôler votre LINK BAR

    6a. Commande vocale

    6b. Panneau supérieurSource* / Bluetooth® / Réglage du volume plus fort/moins fort / PrivacySwitchTM Micro désactivé/micro activé / Micros longue portée* Interrupteur de changement de source: Accueil/HDMI (1, 2, 3)/audio Bluetooth/audio

    optique/audio AUX

    6c. Télécommande1) Microphone2) Téléviseur sous tension/hors tension3) Netflix4) HDMI (choix entre HDMI 1, 2, 3)5) Optique/AUX (choix entre optique et AUX)6) Touche de navigation/OK7) Retour : revenir à l'écran précédent8) Assistant Google : appuyer pour demander de l'aide à l'Assistant Google

    ESPara la información completa sobre el uso de tu barra de sonido JBL, descarga el manual completo del propietario en www.jbl.com

    1. Contenido de la cajaMando a distancia / Cables de alimentación / Cable HDMI / Soportes de montaje en pared / Información de producto y guía para montaje en pared* El número de cables  de alimentación varía de una región a otra

    2. Instalación de la barra de sonido 2a. Coloca la barra de sonido sobre la mesa2b. Monta la LINK BARUtiliza cinta adhesiva para fijar la guía de montaje en la pared, atraviésala con la punta de un bolígrafo o un lápiz para marcar el centro del soporte de montaje y retira el papel.Atornilla los soportes de montaje en la marca de lápiz; atornilla el poste de montaje roscado en la parte posterior de la barra de sonido y engánchala en la pared.

    3. Conecta la barra de sonido3a. Conecta la barra de sonido a tu televisor mediante el HDMI ARC* Asegúrate de que la función HDMI CEC de tu televisor esté activada.

    3b. Conecta la barra de sonido a otros dispositivos* Es necesario adquirir el cable AUX u Óptico por separado

    4. Conecta la alimentación de tu barra de sonido y el mando a distancia

    5. Sigue las instrucciones de con�guración en tu televisor* Asegúrate de usar un cable HDMI y conecta la salida HDMI OUT (TV ARC) de la barra de

    sonido al conector HDMI IN (ARC) de tu televisor

    6. Control de la barra de sonido

    6a. Control por voz

    6b. Panel superiorFuente* / Bluetooth® / Subir/bajar volumen / PrivacySwitchTM (Activador de privacidad) Silenciar/activar micrófono / Micrófono de largo alcance* Interruptor de fuente entre: Inicio/HDMI (1, 2, 3)/Audio Bluetooth/Audio óptico/Audio auxiliar

    6c. Mando a distancia1) Micrófono2) Encendido/apagado del televisor 3) Netflix 4) HDMI (interruptor alternativo HDMI 1, 2, 3) 5) Óptico/Aux (interruptor alternativo óptico/auxiliar) 6) Tecla de navegación/OK7) Regresar a la pantalla anterior8) Google Assistant: pulsa para pedir ayuda a Google Assistant9) Inicio: ir a la pantalla de inicio10) Silenciar/activar (para vídeo y música)11) Subir/bajar volumen12) Bluetooth: pulsa el botón para acceder al modo de pareado/Bluetooth

    7. Especi�caciones del producto• Modelo n.º: LINK BAR• Transductor: 2 altavoces de agudos de 20 mm (0,8 pulgadas), 4 controladores de audio

    ovalados de 44x80 mm• Potencia máxima total: 100W• Respuesta de frecuencia: 75 Hz-20 kHz • Relación señal/ruido: >85 dBA• Alimentación eléctrica: 100-240 V~50/60 Hz• Entradas de vídeo HDMI: 3 (Compatibilidad 4K UHD, HDMI 2.0)• Salida de vídeo HDMI (con canal de retorno de audio): 1 (Compatibilidad 4K UHD, HDMI 2.0)• Versión HDCP: 2.2 y 1.4• Ethernet: 10/100 Mbps• Compatible Dolby Digital• Versión Bluetooth: 4.2• Rango de frecuencia del transmisor Bluetooth: 2402 – 2480 MHz• Potencia del transmisor Bluetooth: ≤ 9dBm

    9) Accueil : revenir à l'écran d'accueil10) Couper/réactiver le son (pour vidéos et musique)11) Réglage du volume plus fort/moins fort12) Bluetooth : activer le mode Bluetooth/l'association Bluetooth

    7. Caractéristiques du produit• Désignation du modèle : LINK BAR• Transducteur : Haut-parleur d'aigus 2 x 20 mm, pilote de circuit 4 x (44 x 80) mm• Puissance maximale totale : 100 W• Réponse en fréquence : 75Hz-20KHz• Rapport signal/bruit : > 85 dB• Alimentation : 100-240 V~50/60 Hz• Entrées vidéo HDMI : 3 (formats UHD 4K et HDMI 2.0 pris en charge)• Sortie vidéo HDMI (avec canal de retour audio) : 1 (formats UHD 4K et HDMI 2.0 pris en

    charge)• Version HDCP : 2.2 et 1.4• Ethernet : 10/100 Mo/s• Support Dolby Digital• Version Bluetooth : 4.2• Gamme de fréquences de l'émetteur Bluetooth : 2402 – 2480 MHz• Puissance de l'émetteur Bluetooth : ≤ 9dBm• Modulation de l'émetteur Bluetooth : GFSK, π/4 DQPSK, 8 DPSK• Réseau sans fil : 802.11b/g/n/ac (2,4 GHz/5 GHz)• Plage de fréquences de l’émetteur WiFi 2,4G : 2412 – 2472 MHz (bande ISM 2,4 GHz, USA

    11 canaux, Europe et autres 13 canaux)• Puissance de l’émetteur WiFi 2,4G :