linear edits f 06 23 15 - cooper · pdf fileapplication io lighting’s line series .75 is...

2
Application io Lighting’s line series .75 is approximately .75" x .75" in cross section. UL listed for dry locations, its low profile housing enables functional luminous intensities from “tight” architectural details such as niches, coves and casework. Similar to halogen light sources, LEDs are point sources that offer superior definition to three-dimensional objects and sparkle to reflective surfaces. line .75 asymmetric is also suitable for closet applications. series .75 is a low voltage linear accent luminaire that may be ordered in incremental lengths that range from 6" to 72" nominal. The asymmetric beam spread is optimized for a forward throw distribution. For details on the symmetric beam spread, see dedicated specification sheet. Projected average rated life is 50,000 hours at 70% of lamp lumen output. To ensure proper performance, architectural details should allow for ventilation and air flow around the fixture. Ambient temperature surrounding the fixture shall not exceed 122˚ F (50˚C). Light Output line series .75 is available with three lumen outputs for white light only. All values below represent the initial raw lumens of the LED. IES format photometry of Lighting Facts labels represent actual light output measured in lumens and candlepower. Light Output losses include optical, thermal and power supply inefficiencies. IES LM-79 format files may be obtained from the factory or downloaded from www.iolighting.com. All products have a CRI greater than 80. Results are typical measurements. >> 3-step MacAdam Binning. Construction Extruded aluminum housing coupled with a patented optical assembly may not be dis- assembled for re-lamping. Customized acrylic optics offer very high transmissivity, UV stability and excellent longevity. Three mounting bracket options include: surface, side surface and field adjustable. Bracket material is composed of stainless steel for ease of installation and removal as required. Electrical 4'-0" 22 AWG, 300 volt rated power cords are supplied on one or both ends of the fixture as specified. Field configurable electrical feed guards against unforseen field conditions. For detailed information regarding daisy chain limitations, remote distance limitations, power supply options, and dimming options consult the io website (www.iolighting.com) or an io representative. Finish Anodized aluminum finish is standard. Custom finishes may be available upon request. ASYMMETRIC INTERIOR APPLICATIONS Dimensions line TM .75 Label references 72" line .75 asymmetric fixture in Very High Output 3000K. Lighting Facts for additional beam spreads and light output levels may be obtained from io Lighting. 5-year warranty LM 79 LM 80 .75" (19.1 mm) .75" (19.1 mm) io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E info@iolighting.com W iolighting.com 7'-0" (2.1m) w/22 AWG 18'-0" (5.5m) w/18 AWG 46'-0" (14.0m) w/14 AWG 71'-0" (21.6m) w/12 AWG DRIVER REMOTE DISTANCE 2700K White: 3000K White: 3500K White: 4000K White: INITIAL LUMENS POWER CONSUMPTION* V: 06_30_15 Standard Output 72 lms/ft 81 lms/ft 83 lms/ft 88 lms/ft 1.02 w/ft High Output 253 lms/ft 284 lms/ft 289 lms/ft 307 lms/ft 3.81 w/ft Very High Output 362 lms/ft 406 lms/ft 413 lms/ft 438 lms/ft 5.08 w/ft Non-standard color temperatures available as a custom offering at additional cost and lead-time. * Power Consumption does not include power supply losses.

Upload: vuongque

Post on 06-Mar-2018

219 views

Category:

Documents


4 download

TRANSCRIPT

Applicationio Lighting’s line series .75 is approximately .75" x .75" in cross section. UL listed for dry locations, its low profile housing enables functional luminous intensities from “tight” architectural details such as niches, coves and casework. Similar to halogen light sources, LEDs are point sources that offer superior definition to three-dimensional objects and sparkle to reflective surfaces. line .75 asymmetric is also suitable for closet applications.

series .75 is a low voltage linear accent luminaire that may be ordered in incremental lengths that range from 6" to 72" nominal. The asymmetric beam spread is optimized for a forward throw distribution. For details on the symmetric beam spread, see dedicated specification sheet. Projected average rated life is 50,000 hours at 70% of lamp lumen output. To ensure proper performance, architectural details should allow for ventilation and air flow around the fixture. Ambient temperature surrounding the fixture shall not exceed 122˚F (50˚C).

Light Outputline series .75 is available with three lumen outputs for white light only. All values below represent the initial raw lumens of the LED. IES format photometry of Lighting Facts labels represent actual light output measured in lumens and candlepower. Light Output losses include optical, thermal and power supply inefficiencies. IES LM-79 format files may be obtained from the factory or downloaded from www.iolighting.com. All products have a CRI greater than 80. Results are typical measurements.>> 3-step MacAdam Binning.

ConstructionExtruded aluminum housing coupled with a patented optical assembly may not be dis-assembled for re-lamping. Customized acrylic optics offer very high transmissivity, UV stability and excellent longevity. Three mounting bracket options include: surface, side surface and field adjustable. Bracket material is composed of stainless steel for ease of installation and removal as required.

Electrical4'-0" 22 AWG, 300 volt rated power cords are supplied on one or both ends of the fixture as specified. Field configurable electrical feed guards against unforseen field conditions. For detailed information regarding daisy chain limitations, remote distance limitations, power supply options, and dimming options consult the io website (www.iolighting.com) or anio representative.

FinishAnodized aluminum finish is standard. Custom finishes may be available upon request.

ASYMMETRIC

INTERIOR APPLICATIONS

Dim

ensi

ons

lineTM .75

Label references 72" line .75 asymmetric fixture in Very High Output 3000K. Lighting Facts for additional beam spreads and light output levels may be obtained from io Lighting.

5-year warranty

LM 79 LM 80

.75"(19.1 mm)

.75"(19.1 mm)

io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com

io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com

7'-0" (2.1m) w/22 AWG 18'-0" (5.5m) w/18 AWG46'-0" (14.0m) w/14 AWG 71'-0" (21.6m) w/12 AWG

DRIVER REMOTE DISTANCE

2700K White:3000K White:3500K White:4000K White:

INITIAl luMENS

POwER CONSuMPTION*

V: 06_30_15

Standard Output

72 lms/ft81 lms/ft83 lms/ft88 lms/ft

1.02 w/ft

High Output

253 lms/ft284 lms/ft289 lms/ft307 lms/ft

3.81 w/ft

Very High Output

362 lms/ft406 lms/ft413 lms/ft438 lms/ft

5.08 w/ft

Non-standard color temperatures available as a custom offering at additional cost and lead-time.* Power Consumption does not include power supply losses.

1. LINE SERIES03 .75 SO, HO or VHO

2. LOCATIONI InteriorIC Closet

3. COLOR27K White 2700K SO(1)

27KHO White 2700K HO(1)

27KVHO White 2700K VHO(1) 3K White 3000K SO(1)

3KHO White 3000K HO(1)

3KVHO White 3000K VHO(1)

35K White 3500K SO(1)

35KHO White 3500K HO(1)

35KVHO White 3500K VHO(1)

4K White 4000K SO(1)

4KHO White 4000K HO(1)

4KVHO White 4000K VHO(1)

CC Custom Color(2)

4. DISTRIBUTION90 Asymmetric clear lens91 Asymmetric opal white lens

5. MOUNTING100 Surface101 Side surface102 Field adjustable

6. FINISH1 Anodized aluminum2 Anodized custom color

7. LENGTH ACTUAL (in/mm)01 6" (6.53"/165.86mm)02 12" (12.22"/310.38mm)03 18" (17.97"/456.43mm)04 24" (23.53"/597.66mm)05 30" (29.22"/742.18mm)06 36" (34.97"/888.23mm)07 42" (40.53"/1029.46mm)08 48" (46.22"/1173.98mm)09 54" (51.97"/1320.03mm)10 60" (57.53"/1461.26mm)11 66" (63.22"/1605.78mm)12 72" (68.97"/1751.83mm)

8. ELECTRICAL FEED1 One feed right end2 One feed left end12 Double end feedNote: Electrical contractor may adjust orientation of electrical feed in the field.

9. VOLTAGE / DIMMING1 120v2 277v3 120v w/dim4 277v w/dim5 Other (International voltage)

10. SPECIFy DRIVER / DIMMING

Note: If not specified otherwise, io will supply 100 watt drivers. Download Power Supply specification sheet from www.iolighting.com.

11. CE Available upon request.

line .75 applications youtube.com/iolighting

LIGHT OUTPUT CONVERSION TABLE

3000K S.O. 5000K S.O. 5000K H.O.3000K H.O.

0.22(1) 1.09(1)0.24(1)1.0(1)

3000K M.O.

0.66(1)

5000K M.O.

0.72(1)

RED GREEN AMBERBLUE

0.53(2) 0.51(2)0.51(2) 0.30(2)

RED GREEN AMBERBLUE

0.53(2) 0.51(2)0.51(2) 0.30(2)

2700K S.O. 2700K H.O.

0.19(1) 0.88(1)

2700K M.O.

0.57(1)

StandardOutput

MidOutput

HighOutput

Very HighOutput

2700K White

3000K White

3500K White

4000K White

5000K White

0.27(1)

0.29(1)

0.73(1)

0.78(1)

1.39(1)

1.54(1)

1.00(1)

1.06(1)

0.29(1) 0.78(1) 1.49(1)1.06(1)

0.32(1) 0.87(1) 1.59(1)1.19(1)

0.25(1) 0.69(1) 1.30(1)0.94(1)

Note: Visit www.iolighting.com or contact an io representative for IES format photometrics.

ASYMMETRIClineTM .75

0 03

io 1 2 3 4 5 6 7 8

Mou

ntin

g Op

tions

9 10

102 Field adjustable (io part #: SA.BK.ADJMT)101 Side surface (io part #: SA.BK.WALL)100 Surface (io part #: SA.BK.SURF)

Orde

r Co

de

1. White light variance between LEDs is equal to or better than 3-step MacAdam Binning.2. Non-standard color temperature and CRI are available. Consult factory for availability.

Foot

note

s

Dim

ensi

ons

Dim

ensi

ons

0.75”(19.1 mm)

0.75”(19.1 mm)

1.07”(27.1 mm)

.50”(12.6 mm)

1.13”(24.4 mm)

.84”(21.4 mm)

.78”(19.9 mm)

.84”(21.4 mm) .50”

(12.6 mm)

0.62”(15.7 mm)

0.84”(21.4 mm)

1.07"(27.1 mm)

0.96”(24.3 mm)

BEAM DIRECTION

BOTTOM

BACK

ASYMMETRIC

115°

BEAM

SPR

EAD

BOTTOM

BEAM DIRECTION

BACK

Dim

ensi

ons

Dim

ensi

ons

0.75”(19.1 mm)

0.75”(19.1 mm)

1.07”(27.1 mm)

.50”(12.6 mm)

1.13”(24.4 mm)

.84”(21.4 mm)

.78”(19.9 mm)

.84”(21.4 mm) .50”

(12.6 mm)

0.62”(15.7 mm)

0.84”(21.4 mm)

1.07"(27.1 mm)

0.96”(24.3 mm)

BEAM DIRECTION

BOTTOM

BACK

ASYMMETRIC

115°

BEAM

SPR

EAD

BOTTOM

BEAM DIRECTION

BACK

Dim

ensi

ons

Dim

ensi

ons

0.75”(19.1 mm)

0.75”(19.1 mm)

1.07”(27.1 mm)

.50”(12.6 mm)

1.13”(24.4 mm)

.84”(21.4 mm)

.78”(19.9 mm)

.84”(21.4 mm) .50”

(12.6 mm)

0.62”(15.7 mm)

0.84”(21.4 mm)

1.07"(27.1 mm)

0.96”(24.3 mm)

BEAM DIRECTION

BOTTOM

BACK

ASYMMETRIC

115°

BEAM

SPR

EAD

BOTTOM

BEAM DIRECTION

BACK

I

1.07"(27.1 mm)

.62"(15.7 mm)

.84"(21.4mm)

.96"(24.3 mm)

.84"(21.4 mm)

.84"(21.4 mm).50"

(12.6 mm)

.78"(19.9 mm)

1.13"(24.4 mm)

1.07"(27.1 mm)

.50"(12.6 mm)

SECONDARy END CAP

Primary Endcap

RIGHT FRONT FEED LEFT FRONT FEEDLEFT BACK FEEDRIGHT END FEED RIGHT BACK FEEDLEFT END FEED

Secondary Endcap End Feed

Backfeed Endcap

Secondary Endcap Front Feed

NEW FIELD CONFIGURABLE ELECTRICAL FEED

Note: Electrical contractor may adjust orientation of electrical feed in the field.

11

30" 3KHO 90 DEGREE

Dim

ensi

ons

Dim

ensi

ons

0.75”(19.1 mm)

0.75”(19.1 mm)

1.07”(27.1 mm)

.50”(12.6 mm)

1.13”(24.4 mm)

.84”(21.4 mm)

.78”(19.9 mm)

.84”(21.4 mm) .50”

(12.6 mm)

0.62”(15.7 mm)

0.84”(21.4 mm)

1.07"(27.1 mm)

0.96”(24.3 mm)

BEAM DIRECTION

BOTTOM

BACK

ASYMMETRIC

115°

BEAM

SPR

EAD

BOTTOM

BEAM DIRECTION

BACK

30fc

41fc

33fc

44fc59fc

58fc

SHELF LIGHTING - 3000K High Output

Right handedendcap

Left handedendcap

BEAM DIRECTION CLOSET LIGHT APPLICATION

BOTTOMBOTTOM

BACK

BACK

Dim

ensi

ons

Dim

ensi

ons

0.75”(19.1 mm)

0.75”(19.1 mm)

1.07”(27.1 mm)

.50”(12.6 mm)

1.13”(24.4 mm)

.84”(21.4 mm)

.78”(19.9 mm)

.84”(21.4 mm) .50”

(12.6 mm)

0.62”(15.7 mm)

0.84”(21.4 mm)

1.07"(27.1 mm)

0.96”(24.3 mm)

BEAM DIRECTION

BOTTOM

BACK

ASYMMETRIC

115°

BEAM

SPR

EAD

BOTTOM

BEAM DIRECTION

BACK

19"(.48 m)

19"(.48 m)

105°

90°

120°

135°

3K HO 0 Degree

180

120

60

150°165°180°

C.P. Distribution

150˚165˚180˚

110

220

257

330

135˚

120˚

105˚

90˚C.P. Distribution

27"(.69 m)

72"(1.83 m)

115°

96"(2.44m

) L

ight

Out

put /

Dis

trib

utio

nsEl

ectr

ical

Fee

d Op

tions

io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com

io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com V: 06_30_15

io L

ight

ing

rese

rves

the

right

to m

odify

the

desi

gn o

r pe

rfor

man

ce o

f our

pro

duct

s at

any

tim

e.

3000K S.O. 5000K S.O. 5000K H.O.3000K H.O.

0.22(1) 1.09(1)0.24(1)1.0(1)

3000K M.O.

0.66(1)

5000K M.O.

0.72(1)

RED GREEN AMBERBLUE

0.53(2) 0.51(2)0.51(2) 0.30(2)

RED GREEN AMBERBLUE

0.53(2) 0.51(2)0.51(2) 0.30(2)

2700K S.O. 2700K H.O.

0.19(1) 0.88(1)

2700K M.O.

0.57(1)

StandardOutput

MidOutput

HighOutput

Very HighOutput

2700K White

3000K White

3500K White

4000K White

5000K White

0.27(1)

0.29(1)

0.73(1)

0.78(1)

1.39(1)

1.54(1)

1.00(1)

1.06(1)

0.29(1) 0.78(1) 1.49(1)1.06(1)

0.32(1) 0.87(1) 1.59(1)1.19(1)

0.25(1) 0.69(1) 1.30(1)0.94(1)