L I M I T E D

Over 35 years experience in supplying bulk handling solutions to the oil and gas industries

ENGINEERING WORLDWIDE

n Blast curtainsn Pressure vesselsn General fabricationn Augers & screw conveyorsn Hoppers, bins & mix tanks

n Hazard area electrical equipmentn Skip filling & transfer stationsn Offshore personneln Mud agitatorsn Pipe work

Spirotech-SRD Group Ltd is one of the largest single-source providers of bespoke design and build solutions and systems for screw conveyor and pressure vessel packages, with its Aberdeen facility fully dedicated to providing systems and maintenance for the oil and gas industry.

“Could not fault Spirotech. From start to finish the design, implementation, risk assessments and method statements were all done to a high standard.”

In-house manufacture of ATEX screw conveyors and pressure vessels to the Pressure Equipment Directive PD5500

Tailor-made screw conveyors for the oil and

gas industries

Spirotech has been designing, manufacturing and delivering

screw conveyors since the company’s inception in 1979

Spirotech manufacture and support the world’s most advanced and safest screw conveyor solutions, supplying explosion proof electrical equipment and associated fabrication services to leading operators and drilling and engineering contractors working onshore and offshore. With the focus on safety, quality and operational performance Spirotech has supported customers in over 80 countries around the world.Spirotech Aberdeen, as part of the Spirotech-SRD Group, focusses on designing bespoke products to suit your particular oil or gas industry requirement and cater for the most demanding commercial environments worldwide. Build is carried out at Spirotech’s 40,000 square feet manufacturing facility in Cambridgeshire and all service and maintenance is handled by the Spirotech York office with its fully trained and experienced engineers on call 24/7.

L I M I T E D

Spirotech York’s Service & Maintenance team

Spirotech-SRD Group Ltd 40,000 sq ft HQ

Spirotech are able to offer versatile manufacturing techniques to cater for every application

www.spirotech-aberdeen.co.ukwww.spirotech-aberdeen.co.uk

SCREW CONVEYORSSpirotech’s screw conveyor systems are tailor-made for many types of product processing and the Design & Production team have extensive knowledge with regard to the characteristics of materials and their properties.Spirotech’s experienced team design efficient and cost-effective screw conveyors to suit individual requirements. High build quality coupled with Spirotech’s own commitment to high standards of design and production ensure a top quality experience for its customers – from initial consultations through a thorough design process, testing of materials and systems to delivering the final product on time and always to budget.Spirotech has over 30 years experience of designing screw conveyors and all of Spirotech’s screw convertors are designed to be fully conversant with the standards required. As one of its foremost products Spirotech has strived to deliver a better quality product and service than its many competitors. Visit http://www.spirotech-aberdeen.co.uk/products/screw-conveyors for full details

VERTICAL AND CANTED SCREW CONVEYORSSpirotech’s new range of canted flight screw conveyors are capable of moving many products – especially friable materials. This makes it a very good alternative to bucket elevators or flexible conveyors with far less moving parts to worry about and requiring far less maintenance.Visit http://www.spirotech-aberdeen.co.uk/products/screw-conveyors for full details

www.spirotech-aberdeen.co.ukwww.spirotech-aberdeen.co.uk

AUGERSIdeal for both light and heavy usage, Spirotech’s auger systems are tailor-made for many types of product processing across a wide variety of markets. Spirotech’s flight press system can produce 360 degree flights up to 1600mm in diameter.Spirotech’s screw conveyor systems are also tailor-made for many types of product processing and the Design & Production team have extensive knowledge with regard to the characteristics of materials and their properties.Visit http://www.spirotech-aberdeen.co.uk/products/augers for full details

BLAST CURTAINSSpirotech supplies cutting edge pressure test barriers and blast curtains that are engineered and designed specifically for the oil & gas industry. Fitted around the choke & kill manifolds/stand pipes/cement lines/cement units and anything else that will be under pressure, our blast curtains safeguard personnel and allow operators to achieve revenue increases by alleviating downtime during pressure testing. Visit http://www.spirotech-aberdeen.co.uk/products/gas-and-oil-rig-blast-curtains for full details

Spirotech produce 360º screw flights up to 1600mm diameter and 30mm thick

Auger systems are tailor-made for many types of product processing

Spirotech supply blast and frag curtains for maximum protection

High pressure, high temperature tubular

screw conveyor

Design and manufacture of pressurised screw conveyors

Over 40 years’ experience in the offshore environment

Tailor-made fabication of walkways, handrails and ladders

35 ton oil blending vessel installation

PRESSURE VESSELSSpirotech has been a leading manufacturer of pressure vessels and chemical holding tanks for the oil & gas sectors for over 35 years, designing and manufacturing many types of pressure vessel in a wide range of sizes and materials for some of the most hazardous and dangerous environments around the world. Visit http://www.spirotech-aberdeen.co.uk/products/pressure-vessels for full details

GENERAL FABRICATIONFrom simple components to full design and fabrication, Spirotech offer a general service that can encompass a full design and fabrication or just a simple laser cut component. Materials cover the full range of ferrous & non-ferrous and vary in thickness from 0.5mm – 100mm.Visit http://www.spirotech-aberdeen.co.uk/products/ for full details

OFFSHORE PERSONNELSpirotech Aberdeen offer not only onshore fabrication capabilities, but can also offer a full offshore mobilization and installation service. Our welders/fabricators have over 40 years’ experience in the offshore environment, are fully qualified and up-to-date with all the necessary documentation for offshore work and are ready to travel anywhere in the world whenever you need for all types of installation work, commissioning, welding and fabrication as well as site surveys and fault finding.

www.spirotech-aberdeen.co.ukwww.spirotech-aberdeen.co.uk

HAZARD AREA ELECTRICAL EQUIPMENTSpirotech provide bespoke control panel systems for hazardous area enclosures that comply with the latest safety requirements following full ATEX Guidelines and are supplied with the relevant declaration of conformity and hazardous area certificate.

Visit http://www.spirotech-aberdeen.co.uk/products/ for full details

HOPPERS, BINS AND MIXERSSpirotech design, manufacture and install all types of mixers, hoppers, tanks and bins to suit customers’ individual requirements. Various easy-clean and robust options are available which can also be fitted with weighing systems for maximum accuracy and optimisation of powder/liquid usage. The materials of construction and finish are varied to suit the individual application. Spirotech can also supply discharge aids such as aeration, vibration or screw dischargers and rotating agitators for more challenging materials along with level indication such as level probes and continuous loadcell weighing. In addition, ATEX Cat 3D Zone 22 compliant systems can also be provided. Visit www.spirotech-aberdeen.co.uk/products/hoppers for full details

SKIP FILLING / TRANSFER STATIONSSpirotech Aberdeen can design single lift Skip Stations to DNV 2.7-1 for any amount of skips to the clients specification. Complete with 360 deg swivel discharge points for accessing the skips on both sides. Supplied with manual or pneumatic slide gates.Visit http://www.spirotech-aberdeen.co.uk/products/ for full details

MUD AGITATORSReliable, quality mechanical mud agitators for the oil and gas industries in a variety of blades and shafts. Visit http://www.spirotech-aberdeen.co.uk/products/mud-agitators for full details

Pipework including water, steam, condensate, glycol and chilled water & primary refrigerants

Design and manufacture of integrated skip filling and transfer stations

Downward flow axial mixer

ATEX IECEx control panel with run stop lights

No-feed screw conveyor assemblies

Prefabricated pipework in carbon and stainless steel, duplex, hastelloy and cunifer

PIPE WORKSpirotech supply various types of pipework for different applications in a selection of materials and offer a variety of quality documentation i.e. full weld traceability, welder certification, material certification, PH testing, non destructive metrology testing, pressure testing and as built drawings.Visit http://www.spirotech-aberdeen.co.uk/products/ for full details

Spirotech-SRD Group Ltd is committed to providing a quality service.

Suppliers of Blast Control blast curtains.

Contact Spirotech Aberdeen Ltd now for more information and a competitive quote.

www.spirotech-aberdeen.co.uk

For more information please contact Spirotech Aberdeen on +44 (0)1224 502038 or email: sales@spirotech-aberdeen.co.uk for a competitive quote for your project.

Spirotech Aberdeen Ltd Waterton Yard, Stoneywood, Aberdeen, AB21 9HX T: +44 (0)1224 502038 E: sales@spirotech-aberdeen.co.uk

Part of the Spirotech-SRD Group of companies

L I M I T E DENGINEERING WORLDWIDE

Solutions for the oil and gas industry worldwide

Offering full in-house design & manufacture since the company’s inception in 1979, Spirotech-SRD Group aim to deliver a better quality product and service and offer a full range of equipment & engineering solutions.

Rollers

Design o�ces

ReceptionAccounts & HR

Production o�cesCNC �ight press

Screw/auger fabrication

Paint shop

Yard

Store

BeadBlast

Storage

Car parkTesting facility

Stainless steel

fabrication

Heavy

fabricationPaint

shop

Shot blastin

g

booth

Machine shop

CNC press

Fabrication

Fabrication

Test area

Lasercuttin

g

Store

Entrance

Visitors car park

SPIROTECH-SRD MANUFACTURING FACILITIES