LIMITED NEW ZEALAND

SPECS SKYJIB SUPER 6

Payload Capacity: 2.5 kg Diameter: 1092 mm

Flight Endurance: 20 minutes Pack-down Dimensions: 1092 x 251 mm

MTOW: 7 kg Payload/Ground Clearance: 450mm

The Aeronavics SkyJib is an iconic aerial robotic workhorse designed for payloads between 2.5 to 7.5 kg, depending on the

configuration. Designed with field operations in mind it is easy to pack down and deploy with quick release components. The craft is

made from high quality carbon composites and aircraft grade alloys including Titanium. The several camera mounting options

accommodate a variety of cameras and offer smooth and fully stabilised footage.

+

+

Package 1 - This package includes a fully assembled and tested craft to add to your fleet and bind to your existing radio. READY TO 23,475.00 NZDOPERATE

READY TO FLY 16,585.00 NZD

BIND ‘N FLY 13,995.00 NZD Package 3 - Only add a Camera and you are setup to capture fully stabilized imagery (video and stills) and see

real-time what the camera is recording with Mission Control Lite.

2.4 Ghz Radio controller System Handover

Zenmuse gimbal (camera not included) Mission Control Lite

+LiPo batteries and charging station

Package 2 - A fully assembled and tested craft including 9 channel radio fully setup and configured,

two batteries, battery charging station and 2 hour instruction.

Wireless video downlink

NZD 700.00

Canon 5D

A surcharge fee applies

Zenmuse

For Sony Nex5 / Nex7

Panasonic

GH3 / GH4

CAMERA MOUNT OPTIONS

Choose your camera mount. The camera mount is included in package 3 - Ready to Operate.

UNIVERSAL CAMERA MOUNTS ARE AVAILABLE ON REQUEST.

Waypoint Data Link

Autonomous flight programming

Dual Operator Setup

Dedicated operator for camera control

Custom Pelican Transport Case

Keep your craft safe and secure

Flight Training

Intermediate 1 day

Pix4D Mapping System

See Pix4D section for package price

OPTIONAL EXTRAS

Light-bridge

High Definition wireless video downlink

NZD 395.00

NZD 1895.00

NZD 495.00 NZD 1750.00

Mission Control Flight Ops

Joystick control and iPad operation

Set of Carbon Propellers

18 x 6 CW+CCW

Mission Control Ground Station

Setup for pilot and camera operator

Field Repair Kit

SkyJib first aid kit - worth over NZD 750,00

Extra Battery

6S LiPo 10000mAh

1st Service Discounted

Full check, test and tune. (Normally NZD 899.00)

OPTIONAL EXTRAS

NZD 4,950.00 NZD 7,940.00 NZD 155.00

NZD 600.00 NZD 415.00NZD 799.00 NZD 1699.00

Replace Bearings

Batteries Check

Upgrade Firmware

Frame Check

Electronics

Test Flights

FLIGHT SCHOOL & CERTIFICATION

Aeronavics offers a range of flight training aligned with and recognised by CAA

RPAS, including the “Manufacturer Training” required for certification in various

countries. The packages are designed to supply the operator with the knowledge

and skills to operate aerial robotic craft safely and within Aviation Authority

regulations.

The following training programs are offered / implemented:

Intermediate (1 day):

• Introduction to flight safety

• Technical overview of electronics

• Overview of controller and modes

• Practical assisted flights and controls with basic manoeuvres

Comprehensive (3-5 days):

• Extensive overview of safety, flight logging and craft maintenance

• Basic Air Law - TBD

• Full technical overview of crafts and all their components

• Configuration and assembly of electronic components

• Full technical overview of flight controller

• Configuration of flight controller

• Flight controller modes and features

• Standard operation procedures for performing flights

• Flight simulator - 2 hours

• Basic assisted flights - 2 hours

• Basic flight modes - 2 hours

• Basic flight manoeuvres - 4 hours

• Comprehensive fails safe and recoveries - 4 hours

• Autonomous waypoint flying - 8 hours

• Intermediate flight manoeuvres - 4 hours

• Manual (unstabilised) flight training - 4 hours

• Full technical evaluation - 4 hours

• Full piloting evaluation - 4 hours

Please contact us for specialised training and assistance requirements.

Consultancy services are available for Agricultural applications in collabora-

tion with AbacusBio - details available on request.

Regulation/Certification requirements differ per country – we can supply you with

the relevant information.

MISSION CONTROL

Aeronavics has developed a range of Ground or Base Station units (Mission

Control) to allow the operator of the Aerial Robot to easily view on board video

streams. Live telemetry data shows the state and health of the craft and also

allows for a means to operate the craft without hand held control interfaces such

as RC transmitters.

The “Lite” unit is an RC Transmitter mounted display screen and wireless video

downlink - this is the simplest way to interact with the craft in order to pilot and

view simultaneously what the craft is seeing, and operate the camera remotely.

The “Ground Station” unit is housed in a quality and robust SKB case and offers

a variety of interface options - this self-powered unit can run additional monitors,

provide USB charging, video control interfaces as well as its own Hi Resolution

monitor and Remote control unit.

Dimensions: 500 x 400 x 280 mm

The “Flight Ops” version has all the features of the “Ground Station” unit as well

as a joystick control 2.4 Ghz 6 channel transmitter for a second operator to con-

trol the craft or its on-board devices such as Thermal imaging cameras and laser

sighting equipment.

It also has an i-Pad mounting facility for tablet control interfaces such as way-

point and grid pattern autonomous flight modes and an array of automated flight

and camera functions.

This unit enables two people to efficiently conduct full search and rescue, sur-

veillance and situational awareness operations in the field, as

well as advanced camera control for film and television.

Dimensions: 500 x 400 x 280 mm

Pix4Dmapper is used by a wide range of industries such as Mining, Agriculture,

Topography, Natural Resources Management, Emergency Response and many

more to help professionals of multiple domains with mapping as an easy day-to-

day task.

Pix4Dmapper converts aerial and oblique images taken by the SkyJib into

geo-referenced 2D orthomosaics and 3D surface models and point clouds.

With its advanced automatic aerial triangulation based purely on image con-

tent and unique optimisation techniques. Pix4Dmapper software offers up to

centimeter-grade 3D precision, features a fully automatic workflow and can

be used by anyone as it is intuitive and easy to use.

You can assess, edit and improve projects directly in the software using the

rayCloud and Mosaic Editor and seamlessly import results into any professional

GIS, CAD and traditional photogrammetry software package.

• Survey-grade accuracy: Achieve up to cm grade, LiDAR like 3D precision.

• Intuitive & easy to use: no training needed, easily process projects thanks to

the fully automated workflow and visualise & edit results.

PIX4D SOFTWARE

Aeronavics offers a Pix4D package deal with your Ready to Operate SkyJib 6:

30,920.00 NZD. This solution can be used in Mining, Topography, Agriculture,

Natural Resource Management, Construction and Emergency Response

industries. It will give you the opportunity to:

• Annotate and measure polylines (breaklines), surfaces and volumes

(stockpiles) with the highest precision achievable

• Generate your orthomosaics, DSMs and point clouds from aerial and oblique

imagery using any camera and lens, including multi-band images. Keep full

control over your projects at all times by assessing and editing all tie points

(GCPs, Check points, etc.).

• Use the fully automatic workflow and let the software handle all calibration

and processing to achieve survey grade accurate outputs. Increase efficiency

and save on extra field trips with Rapid Check mode for instant quality

assessment directly on site.

• Assess and edit your projects using the rayCloud and Mosaic Editor.

Improve the accuracy of your projects and annotate objects directly in the

software, then seamlessly import your results and vector objects into your

industry specific workflow and any GIS, CAD and traditional photogrammetry

software package.

Discover how our SkyJib Ready to Operate and Pix4Dmapper package can

cover the needs of your industry by clicking on the video below or by visiting

our .

AERIAL ROBOTICS – THE NEXT “BIG THING”

Aerial Robotics or Unmanned Aerial Vehicles, are already proving to be ‘the

next big thing’ comparable to the personal computer 40 years ago. There are

countless applications in a wide array of industries to help save time and money,

increase safety, offer peace of mind and expand creative perspectives. Systems

are easy to use, affordable, quiet and environmentally friendly; more great

reasons to adopt this technology.

• Modular setup - easy pack down for transport

• Pelican Custom Travel Cases (optional)

• Real-time streaming of onboard video to mission control ground stations

• GPS coordination and waypoint programming (various degrees)

• Various fail safes including ‘auto-leveling’, ‘position hold’, ‘return to base’,

‘auto-land on low battery’ and controller-redundancy (non-standard)

• Battery powered (LiPo)

• Operational wind speed for autonomous flight up to 40km/h

• Range of 3km (extendable up to 25km)

• Speed up to 80km/h

• Height ceiling of 400ft AGL (regulation enforced)

• Four hours support included

GENERAL SPECS ACROSS ALL MODELS

Application

From Hollywood blockbusters to wedding photography - aerial robotics is

changing the way video and images are captured. Surreal sweeping shots,

a true birds-eye view… Wildlife documentaries, commercials, news reports,

advertisements and live broadcasts of sporting events are all enhanced by

the new perspectives our systems offer.

World renowned for advanced vibration dampening, payload capacity,

transportability and durability, our systems have been the preferred choice for

industry professionals for several years.

For who: Benefits:

• Production Companies

• (Semi) Pro Camera Operators

• Camera Rental Companies

• Marketing Agencies

• Real Estate Agencies

• (Aerial) Photography Companies

• Expand Creative Potential &

Perspective

• Increase Efficiency / Flexibility

• Save Money / Time

• Increase Safety

• Reduce Environmental Impact

Application

Easy to deploy, operate and retrieve, these systems are an essential resource to

increase situational awareness, assess damage from natural disasters, search

for missing bushwalkers, find hot spots in forest fires, sample air for pollution,

map environments, inspect infrastructure, secure borders, report accidents and

monitor environmental change.

Infrared and Thermal Imaging cameras and various other equipment such as

3D LIDAR expand the functional value of these craft; the potential is limitless

and we are ever expanding the scope of possibility.

For who: Benefits:

• Police / Law Enforcement

• (Rural) Fire Brigades

• SAR Organizations

• Councils

• Coast Guard

• Federal Agencies

• Universities/Research

• Increase Situational Awareness

• Increase Safety

• Increase Efficiency

• Save Money / Time

• Reduce Environmental Impact

MEDIA PUBLIC SERVICES INDUSTRY

Application

Cost effective, saving time and reducing risk to human lives – industrial

applications are expanding for this technology and we are developing

specialized craft for these; an ideal tool for mapping, planning and progress

monitoring. Property developers can provide views from the 3rd, 4th, 10th floor

of a building that does not even exist yet. Damage to property and the

environment can be swiftly and accurately assessed after natural disasters;

architects can create instant 3D images and imprints of subject areas and

structures. Mining companies can gather volumetric data in just minutes;

surveyors and construction companies can 3D map area’s with relative ease;

a power company can inspect lines and transformers…and carry leader lines

across gulley’s and ravines…and this list grows daily.

For who: Benefits:

• Mining Companies

• Civil Engineering Companies

• Oil and Gas Companies

• Energy / Utilities Companies

• Property Developers / Architects

• Insurance Companies

• Increase Safety

• Increase Efficiency

• Increase Precision

• Save Money / Time

• Reduce Environmental Impact

Application

Scan your property with a birds-eye view to inspect infrastructure and stock

- gathering crucial information for planning the day’s activities. Remove the

safety hazard of monitoring and mustering in rough terrain, save fuel, machinery

costs and time simultaneously. Count stock instantly, accurately and remotely,

recognise animals in distress. A number of agri-specific sensors are being

developed for Precision Agriculture to monitor crop health, growth, irrigation,

forecast yields, detect diseases at early stage and systems are even used to

scare birds. Precision Spraying is under development for quick and precise

crop and weed spraying, with greater safety for operator and environment.

Forestry and fisheries are also opening to new possibilities that enable greater

productivity.

For who: Benefits:

• Dairy Farmers

• Beef and Sheep Farmers

• Crop Farmers

• Vineyards

• Forestry

• Fisheries

• Agricultural Contractors

• Save Money / Time

• Increase Efficiency

• Increase Precision

• Increase Safety

• Reduce Environmental Impact

• Attract Younger Generation

AGRICULTURE