lil tipper - ddks industriesddksindustries.com/pdf/ddks_tippingvalve_1.20.17.pdflil tipper • pump...
TRANSCRIPT
Heavy & Medium Duty Dump Trucks & Trailers
LIL TIPPER
• Pump and cylinder protected in the “Raise” and “Neutral” position of the spool
• Manual shift or factory installed “OE” air shifts
• Built-in load check maintains dump body angle and is installed in the cylinder port for superior self-cleaning
• Built-in direct acting relief valve set at factory
• 100% factory tested relief valve
• SAE and NPT ports available
• Neutral lock-out safety cap for use with pull-off cable
Precision-Engineered Fluid Power Products
The Sensible Choice for Pumps
FeaturesDump TrucksWalking Floor
Permco USA | 1500 Frost Road | P. O. Box 2068 | Streetsboro, Ohio 44241
Copyright © 2015 © Bulletin # TV-215 Version 2.3
Pumps
Dimensional Data (inches)
Permco is a leading manufacturer of high-pressure hydraulic gear/vane pumps and motors, flow dividers, intensifiers, and acces-sories. Available in a wide variety of sizes and configurations to suit your application needs.
www.permco.com
Lil Tipper Code
TV - ORB - AS - 1 - **Tipping Valve
NPT - PortsORB - Ports
AS Air ShiftMS Manual Shift
Pressure Setting20 2000 psi25 2500 psi30 3000 psi
1 RP-5514X RP-5514-3000XX/XX Gemini*
.50
1-1/4"T PORT
.50
1.25
.25
2.01
A
B
1" P PORT
6.27 6.00
4.59
.132 .243.583.51
A
C
1" P1 PORT
1/8" NPT LOWER PORT
1/8" NPT RAISE PORT
7.27
1.55
5.27
5.24
6.56
.13
2.41C
B
2.375
3.750
.47( 7/16 SHCS CUSTOMER SUPPLIED)
1.188
1.875
1.84
1.813
B
C
P
T
P1AIR SHIFT
*25/32(2500/3200 psi) is the most common pressure setting for the Gemini. Other pressure settings are specified by the XX/XX. Example 20/28 = 2000/2800 psi
P Outlet (to cylinder)
P1 Inlet (from pump)
TTank Line
(Return to Tank)
586-323-5909