lightning & grounding topraklama ve yÝldÝrÝmdan …
TRANSCRIPT
1thru 3-Aluminum Air TerminalsPart No. Diameter Length Class3812CUAT 3/8” 12” I3824CUAT 3/8” 24” I1212CUAT 1/2” 12” II1224CUAT 1/2” 24” II5812CUAT* 5/8” 12” II5824CUAT* 5/8” 24” II* Thread size is 1/2” Diameter• For nickel or tin plated air terminals addsuffix N for nickel and suffix T for tin.
1 thru 3 - Copper Air Terminals
* Thread size is 1/2” Diameter
Part No. Diameter Length Class1212CUAT 1/2” 12” I1224CUAT 1/2” 24” I5812CUAT* 5/8” 12” II5824CUAT* 5/8” 24” II
* Nominal pipe size range 1.25” - 2”• Other sizes available - contact factory.• Air terminal not included.• Accepts lightning conductor up to 9/16” diameter.
1 thru 4 - Universal Bases
Part No. MaterialCPRB1.5/2AT12* Tinned Bronze 1/2”CPRB1.5/2AT38* Tinned Bronze 3/8”APRB1.5/2AT12* Aluminum 1/2”
Air TerminalSize
• Add prefix T for electro tin plated bases.• Accepts #14 bonding conductor up thru Class IIlightning conductor.
5 - Pipe Rail Bases InternallyPart No. Material Threaded HubCUBU38I Bronze 3/8”CUBU12I Bronze 1/2”AUBU12I Alumunim 1/2”
6 - Class II - Copper
29-50COIL 29 16 AWG 72,50029-100 29 16 AWG 72,50029-250 29 16 AWG 72,500
X-SectionalSize Area in CM
Strands Size
No. ofStrandPart No.
6 - Class I - Copper
28-50COIL 28 14 AWG 115,00028-100 28 14 AWG 115,00028-250 28 14AWG 115,000
X-SectionalSize Area in CM
Strands Size
No. ofStrandPart No.
• Approximate diameter is 3/8”• Electro tin plated conductor also available
• Approximate diameter is 1/2”• Electro tin plated conductor also available
• Approximate diameter is 9/16”
A37-50COIL 37 13 AWG 192,000A37-100 37 13 AWG 192,000A37-250 37 13 AWG 192,000
6 - Class II - AluminumX-Sectional
Size Area in CMStrands
SizeNo. ofStrandPart No.
A24-50COIL 24 14 AWG 98,600A24-100 24 14 AWG 98,600A24-250 24 14 AWG 98,600
6 - Class I - AluminumX-Sectional
Size Area in CMStrands
SizeNo. ofStrandPart No.
• Approximate diameter is 7/16”
• For use with all cables thru 4/0 or up to 9/16” diameter• Electro tin plated holders also available
Part No. Material262 Stamped CopperA262 Aluminum
8 - Cable Holders
www.afielektrik.comE 01
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
9 - 1 Bolt Parallel ConnectorsPart No. Material ClassB1BC Bronze IIA1BC Aluminum IITBIBC ETPB* II
*Electro Tin Plated Bronze• Accepts all main size wire up to 5/8” diameter.
10 - Bi-Metal 1 Bolt Parallel ConnectorsPart No. Material ClassBM1BC Bi-Metal II• 2” x 1-1/2” connector allows for splicing ofaluminum and copper conductors.
11 - Bi-Metal ConnectorsPart No. Material Class211 Bi-Metal II• Accepts all main size wire up to 17/32” diameter.
Part No.230V-12230V-18230V-24230VBM12230VBM18230VBM24
12 - Thru-Roof Connectors
DescriptionCopper roof conductor tocopper downlead cable
with vertical baseconnector.
Aluminum roof conductorto copper downlead cable
with vertical baseconnector.
Length
12”18”24”12”18”24”
14 - Bonding PlatesPart No. Material Class217 ETPB* II*Electro Tin Plated Bronze• Accepts all main size wire up to 9/16” diameter.
13 - Bonding LugsPart No. Material216 ETPB*A216 Aluminum*Electro Tin Plated Bronze• Accepts bonding conductors #6AWG - #4AWG.
• Stainless Steel “U” bolt for strength and corrosionresistance.• Provides over 1-1/2” of contact between the groundelectrode and conductors.• Accomodates two horizontal conductors thru 250MCM.• Accomodates one vertical conductor up to 500MCM.
Ground Rod ConductorPart No. Size Range
305 Up thru 1” #6 Str - 500MCM
16 - Ground Rod Clamp
• 10.3 fluid oz. cartridge.• Application coverage (per tube) is approximately 5 cable holders and 5 bases.• For use on metal, masonry and wood. Not for use on TPO or Hypolon roofs.• Use on clean surface, free of dirt surface in temperatures not below 30°.
15 - M-1 Structural SealantPart No. Color
M1-10OZ-B BlackM1-10OZ-G GrayM1-10OZ-L LimestoneM1-10OZ-W White
ACC2 Aluminum A28 & A24 N/AACC3 Aluminum A37 N/ACCC1 Copper #14 2 Str., 4 Str., 2 Sol.CCC2 Copper 29 & 32 1/0 Str. & 2/0 Str.CCC3 Copper 28 & 24 4/0
Part No. MaterialFits Lightning Fits Grounding Conductors Conductors
7 - Cable Clips
• Electro tin plated clips also available
E 02
www.afielektrik.com
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
Copper Clad Steel Ground Rods
Sectional Copper Clad Steel Ground Rods
www.afielektrik.comE 03
Approx. Wt. Standard Approx. Wt. UL WithPart No. Size Each (lbs.) Bundle lbs./Bundle Mark UPC Label
12N6X2 1/2" x 6' 4 5 20 No No12N6X2UPC 1/2" x 6' 4 5 20 No Yes12N8X2 1/2" x 8' 6 5 30 No No12N8X2UPC 1/2" x 8' 6 5 30 No Yes1208UPC 1/2" x 8' 6 5 30 Yes Yes1210 1/2" x 10' 7 5 35 Yes No12N10X2 1/2" x 10' 7 5 35 No No12N10X2UPC 1/2" x 10' 7 5 35 No Yes586XUPC 5/8" x 6' 6 5 30 No Yes588 5/8" x 8' 7 5 35 Yes No588RUS 5/8" x 8' 7 5 35 Yes No588UPC 5/8" x 8' 7 5 35 Yes Yes5810 5/8" x 10' 9 5 45 Yes No5810UPC 5/8" x 10' 9 5 45 Yes Yes348 3/4" x 8' 11 5 55 Yes No3410 3/4" x 10' 13 5 65 Yes No3412 3/4" x 12' 15 5 75 Yes No110 1" x 10' 23 3 69 Yes No
Sectional Stainless SteelGround Rods Notes:SS-3 = Type 300 Stainless Steel -Non-ferrous UL listed.Other sizes available.Contact factory for details.
APPLICATION NOTES:• Sectional ground rods are used to
help reduce ground resistance inpoor soils such as sand and gravel.
• Doubling ground rod length theoretically reduces resistance 40%.
Approx,Wt. Standard Approx,Wt. ULPart No. Size Each (Ibs.) Bundle Ibs./Bundle Mark
S1210 1/2" x 10' 7 5 35 YesS582 5/8" x 2' 2 5 10 NoS583 5/8" x 3' 3 5 15 NoS585 5/8" x 5' 5 5 25 NoS588 5/8" x 8' 7 5 35 YesS5810 5/8" x 10' 9 5 45 YesS348 3/4" x 8' 11 5 55 YesS3410 3/4" x 10' 13 5 65 YesS110 1" x 10' 23 3 69 Yes
• Light duty ground rod clamp for securing cable to ground rod.
• Eliminates the need to inventory assorted different-size clamps.
• Replaces a wide range of products made for economy, standard duty, heavy duty and extra heavy duty applications.
• Made from corrosion resistant siliconbronze.
• Accommodates 3/8" to 3/4" groundrods and #10 Solid to 1/0 Strandedconductor.
• UL and CSA listed for Direct Burial under UL467*.
• Tested to 300 inch-pounds.
Universal Ground Rod Clamp
Ground Conductor Box Approx.Box ULRod Size Range Qty. Wt. (Ibs.) Listed*
3/8" 1/0 - 10 SOL 10 2 No1/2" 1/0 - 10 SOL 10 2 Yes5/8" 1/0 - 10 SOL 10 2 Yes3/4" 1/0 - 8 SOL 10 2 Yes
302UGRC
Part No.
NEC 2005 Article 250-53(G)(Summarized)The electrode shall be installedso that 8” of length is in contactwith the soil. It shall be driven toa depth of not less than 8” exceptwhere rock bottom isencountered. In the case ofbedrock, the electrode shall bedriven at an angle not to exceed45 degrees from the vertical orshall be buried in a trench that isat least 2-1/2” deep.
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
APPLICATION NOTES:• Ground Rod Clamps for lightning protection systems require1-1/2" of surface contact betweenconductor and ground rod.• Light duty series (300LD, 301LD, 302LD & 302UGRC)acceptable for electrical grounding, but notlightning protection.
• Light duty ground rod clamp.• Bronze cap screw secures the cable to the ground electrode.• Commonly called acorn or tear drop clamp.
Ground Conductor Approx.BoxBox ULPart No. Rod Size Range Wt. (Ibs.) Qty. Mark
300LD 1/2" 10 SOL - #2 STR 10 2 Yes301LD 5/8" 10 SOL - #2 STR 10 2 Yes302LD 3/4" 10 SOL - #2 STR 10 2 Yes303LD 1" 8 SOL - #4/0 10 6 Yes
TECHNICAL NOTES:• Ground Rod Clamps for lightning protection systems
require 1-1/2" of surface contact between conductorand ground rod.
• Heavy duty bronze ground rod clamps.• Provides more than 2 inches of contact area with cables and
ground rod.• Two stainless steel cap screws secure the cable to the ground
electrode for a positive electrical connection.• UL 96 listed. UL 50H2 is Harger's identification number.
Ground Rod ClampGround Conductor Box Approx.Box
Part No. Rod Size Range Qty. Wt. (Ibs.)
300 1/2" #4 Str - 4/0 AWG 10 5301 5/8" #6 Str - 4/0 AWG 10 5302 3/4" #6 - 4/0 AWG 5 3
• Bronze ground rod clamp features astainless steel "U" bolt
for strength and corrosion resistance.• Provides over 1-1/2" of contact betweenthe ground
electrode and conductors.• Accommodates two horizontalconductors thru 250 MCM.• Accommodates one vertical conductorup to 500 MCM.• Fits all ground rods through 1" diameter.Ideal for connecting
down conductors to ground loopconductors.
Ground Conductor Box Approx.BoxPart No. Rod Size Range Qty. Wt. (Ibs.)
305 Up thru 1" #6 AWG - 500 MCM 5 3
Ground Rod Clamp
Ground Rod Clamp
www.afielektrik.comE 04
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
Ground Rod Coupler
• Corrosion resistant silicon bronzethreaded ground rod coupler forsectional ground rods.• Also available in stainless steel.Stainless steel couplers are notUL Listed.
www.afielektrik.comE 05
• The cartridges are packaged in a plastic box containingeither 10 units per box (5 boxes per case) or 20 unitsper box (10 boxes per case).
• Each box also contains instructions and metal disks.• One metal disk is used for each connection.
Weld MetalSize Qty. Per
CartonUWM15 20UWM25 20UWM32 10UWM45 20UWM65 20UWM90 10UWM115 10UWM150 10UWM200 10UWM250 10UWM500 10
Sectional Box Approx.BoxPart No. Ground Material Qty. Wt. (Ibs.)
GRC12 1/2" Bronze 5 2-1/2GRC12SS 1/2" Stainless Steel 5 2-1/2GRC58 5/8" Bronze 5 2-1/2GRC58SS 5/8" Stainless Steel 5 2-1/2GRC34 3/4" Bronze 5 2-1/2GRC34SS 3/4" Stainless Steel 5 2-1/2GRC1 1" Bronze 5 5GRC1SS 1" Stainless Steel 5 5
• The disk rests on the bottom of the crucible and holds the weld metal powder in place
until the reaction occurs.• A new disk is required each time a weld is made.• Disks are included with the Weld Metal.
Box Approx.BoxPart No. Description Diameter Qty. Wt. (Ibs.)
DISK15/65 Used in molds using 3/4" 20 1/8UWM15 thru UWM65 weld metal
DISK90/115 Used in molds using 1" 10 1/8UWM90 thru UWM115 weld metal
DISK150/500 Used in molds using 1-1/2" 10 1/4UWM150 thru UWM500 weld metal
Ground Rod Driver
• High strength alloy driving studprevents damage to the coupler orground rod threads when drivingground rods.
Ground Rod Box Approx. BoxPart No. Size Qty. Each (lbs.)GDS12 1/2" 5 2-1/2GDS58 5/8" 5 2-1/2GDS34 3/4" 5 2-1/2GDS1 1" 3 3
Disk
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
• Under normal usage, the high temperature graphite moldcan last for an average of 50 or more connections.
• The smokeless process uses an integrated filter systemon the mold and electric ignition of the weld to producea finished connection with minimal smoke emission. Idealfor indoor and confi ned space working conditions.
• For smokeless process, ignition is accomplished with theuse of a rechargeable battery.
Wear Plates• Depending on the care and treatment of the mold, it will
average 50 or more welds.• The openings of the mold get worn down due to forcing
a mold shut over "out of round" conductors, the ends ofconductors hitting and chipping the openings, etc.
• Wear plates can be supplied for all molds for cable sizes;#2 Solid 1/0 AWG through 500 MCM and Copperwel cable7/#10 through 19/#6.
• To order, add the suffi x "-WP" to the Ultraweld part number.Example: RT-4/04/0B-WP
*Wear plates only available on1/0 stranded & larger orCopperweld 7/#10 and largerrun and tap cables.Also available from #2 solid run& tap cables.
Smokeless Mold
Flint Igniter
Torch Head
Available Number ofWeld Type Wear PlatesBH 2BS 2GD 2GO 3GS 3HB 1HU 2LE 1PB* 3PT* 4RO 2RS 2RT 3VA 1VH 2VT 2XO 4
#BATTPACKBattery Pack
SmokelessMold
www.afielektrik.comE 06
• Mold Handle Clamps are required for all molds.• Some molds are used with specialized frames.• Handle clamps MH1 & MH2 come with a flint
igniter (FLTIG).• Handle clamps have a Zinc Ultraseal plated finish.
Mold Handle Clamp
Approx.Wt.Part No. Description Qty. Each (Ibs.)
MH1 For All molds with B, E, K, P & Q mold price key (3" wide) EA 2-3/4MH2 For All molds with C, D, F & Z mold price key EA 3-1/2MH3 For Combo molds with L, M & N mold price key EA 1/4MH4 For Combo molds with R mold price key EA 1-1/2
• When making a connection, Flint Igniters are used to ignite the starting material.
• Flint Igniters with MH1 and MH2 handle clamps.• Replacement Flints are also available.
• Self*igniting Torch Head is designed to fit 14 or16 ounce propane cylinders.
• Torches are required to remove moisture from the mold and conductors before making the Ultraweld connections.
Approx, Wt.Part No. Description Qty. Each (Ibs.)FLTG Flint Igniter EA 1/4FLTIGEXT 36” Extention EA 1-1/2RPLFLT Replacement Flints EA 1/8
Approx, Wt.Part No. Qty. Each (lbs.)TRCHD EA 1-1/4
MH1, MH2
MH4
MH3
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
Part No. Wt.ULTRAFILL 50 lbs.
Ultrafill - Earth (Ground) Enhancement Material
For example, placing a 5/8" x 10' ground rod ina 4" hole would require 63 pounds of Ultrafill.
Hole Size 5/8" Ground Rod 2" EGR4" 6.3 4.86" 14.3 12.98" 25.7 24.210" 40.2 38.712" 57.9 56.5
Pounds of Ultrafill Required Per FootLiquid Mixing Instructions:If mixing Ultrafill into a slurry form, use 3 to3-1/2 gallons of waterper bag of Ultrafill. To facilitate ease of mixing,we recommend theuse of a standard cement mixer.
For example, using 2" of material in a 6" wideby 10' long trench would require 62 pounds ofUltrafill.
Widht 1 2 3 44" 2 4.1 6.2 8.26" 3.1 6.2 9.2 12.18" 4.1 8.2 12.3 16.410" 5.2 10.4 15.6 20.812" 6.2 12.4 8.6 24.8
Pounds of Ultrafill Required Per Foot
Thickness of Ultrafill (Inches)Trench
www.afielektrik.comE 07
Rasp• Ideal for removing mill scale and
rust from steel surfaces.
Part No. Qty. Approx. Wt. Each (lbs.)RASP EA 7
• Cold Galvanizing Spray is used on galvanized steel surfaces to touch up heat affected areas after welding.
• The repair is often cosmetic due to minimal damage that may occur to the galvanized surface.
• CGS available in 16 ounce aerosol can.
Cold Galvanizing Spray
• Slag can be cleaned from the molds by using a MoldCleaning Spade.
• The cleaning spade is especially useful on horizontallysplit molds.
• The cleaning spades are specifi cally designed to fit the mold crucible for a given range of weld metal sizes.
• Consistent and proper use of cleaning spades will aidin maintaining or exceeding the average mold life of 50 connections.
Mold Cleaning Spade
• Slag can be removed from molds by using a Mold Cleaning Brush.
• The brush is especially useful on vertical split molds.• Consistent and proper use of the brush will aid in
maintaining or exceeding the average mold life of 50connections.
MCBRSH1
MCBRSH2Click Here for DWG
Mold Cleaning Brush
Part No. Qty. Approx. Wt. Each (lbs.)MCBRSH1 EA 1/4MCBRSH2 EA 1/16
Part No. Qty. Approx. Wt. Each (lbs.)CGS EA 1
Part No. Weld Metal Sizes Qty. Approx. Wt. Each (lbs.)MCSPD15/65 UWM15 thru UWM65 EA 1/4MCSPD90/500 UWM90 thru UWM500 EA 1/4
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-UL Listed
SipariflKodu
BYU-4005BYU-4010BYU-4015BYU-4020BYU-4025BYU-4030BYU-4035
Ø(mm)
2003004005006008001000
16161616161616
L(mm)
SipariflKodu
BYU-4040BYU-4045BYU-4050BYU-4055BYU-4060BYU-4065BYU-4070
Ø(mm)
2003004005006008001000
20202020202020
L(mm)
Krom nikel ya dabak›r üzeri nikelkaplamal› olarak daüretilebilir.
Bak›r Yakalama Ucu
BAKIR GALVAN‹Z ALÜM‹NYUM
2x50 BTK-10 BTK-20 BTK-30
Kesitmm2
BAKIR GALVAN‹Z ALÜM‹NYUM
20x3
20x5
30x3
30x5
40x3
40x5
BTK-1010
BTK-1020
BTK-1030
BTK-1040
BTK-1050
BTK-1060
BTK-2010
BTK-2020
BTK-2030
BTK-2040
BTK-2050
BTK-2060
BTK-3010
BTK-3020
BTK-3030
BTK-3040
BTK-3050
BTK-3060
Kesitmm2
Bak›r Yakalama Ucu Taban›
Plastik Kutulu Test Klemensi
Lama Test Klemensi
Trifonlu ‹nifl Klemensleri (Yuvarlak ‹letken)BAKIR GALVAN‹Z ALÜM‹NYUM
10
16
25
35
50
70
95
120
150
185
240
B‹K-1101
B‹K-1102
B‹K-1103
B‹K-1104
B‹K-1105
B‹K-1106
B‹K-1107
B‹K-1108
B‹K-1109
B‹K-1110
B‹K-1111
B‹K-1201
B‹K-1202
B‹K-1203
B‹K-1204
B‹K-1205
B‹K-1206
B‹K-1207
B‹K-1208
B‹K-1209
B‹K-1210
B‹K-1211
B‹K-1301
B‹K-1302
B‹K-1303
B‹K-1304
B‹K-1305
B‹K-1306
B‹K-1307
B‹K-1308
B‹K-1309
B‹K-1310
B‹K-1311
Øinç
www.afielektrik.comE 08
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Elektrolitik Bak›r Rulo (Bant)
SipariflKodu
Ölçü(mm)
Kesit (mm2)
A¤›rl›k(kg/mt.)
10x210x310x515x215x315x520x220x320x525x225x325x530x230x330x540x240x340x550x250x350x5
2030503045754060
1005075
1256090
15080
120200100150250
0,1780,2670,4450,2670,4000,6670,35505340,8900,4450,6671,1100,5340,8001,3350,7121,0681,7800,8901,3352,225
BCR - 1020BCR - 1030BCR - 1050BCR - 1520BCR - 1530BCR - 1550BCR - 2020BCR - 2030BCR - 2050BCR - 2520BCR - 2530BCR - 2550BCR - 3020BCR - 3030BCR - 3050BCR - 4020BCR - 4030BCR - 4050BCR - 5020BCR - 5030BCR - 5050
ELEROL‹T‹K MONO BAKIR TEL
SipariflKodu
Kesitmm2
BCM - 1,5BCM - 2,5BCM - 4BCM - 6BCM - 10BCM - 16BCM - 25BCM - 35BCM - 50
1,52,546
1016253550
Tel Çap›(Ø mm)
A¤›rl›k(kg/mt.)
1,381,782,302,803,604,505,60
68
0,01340,02220,03550,05330,08990,14220,22220,31110,4445
www.afielektrik.comE 09
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Mono Bak›r Teller: TS 3 ve DIN-48201
Standartlar›na uygun imal edilmektedir.
‹letkenlik; 58 m/ohm mm2(min.)
Elektrolitik Örgülü Bak›r Tel
Örgülü Bak›r Teller: TS 3 ve DIN-48201
standartlar›na uygun imal edilmektedir.
‹letkenlik; 58 m/ohm mm2(min.)
SipariflKodu
Kesitmm2
Tel Çap› Ø mm
A¤›rl›k(kg/mt.)
BCU - 10BCU - 16BCU - 25
BCU - 35
BCU - 50BCU - 70BCU - 95BCU - 120BCU - 150BCU - 185BCU - 240
101625
35
507095
120150185240
7x1,327x1,707x212
7x2,50
7x3,0019x1,7619x2,1219x250
19x2,8037x2,2037x2,5037x2,80
0,08990,14220,2222
0,3111
0,44450,06230,08461,06681,33501,64502,1350
Lama-Lama Ba¤lant› Klemensi
Lama-‹letkenBa¤lant› Klemensi
Lama-‹letkenBa¤lant› Klemensi
SipariflKodu
BLT - 451
BLT - 452
BLT - 453
BLT - 454
BLT - 455
BLT - 456
BLT - 457
BLT - 458
BLT - 459
BLT - 460
BLT - 461
A(mmxmm)
B (mm2)
40x340x540x340x540x340x540x340x540x340x540x340x540x340x540x340x540x340x540x340x540x340x5
10
16
25
35
50
70
95
120
150
185
240
Lama-‹letkenBa¤lant› Klemensi
SipariflKodu
BLT - 351
BLT - 352
BLT - 353
BLT - 354
BLT - 355
BLT - 356
BLT - 357
BLT - 358
BLT - 359
BLT - 360
BLT - 361
A(mmxmm)
B (mm2)
30x330x530x330x530x330x530x330x530x330x530x330x530x330x530x330x530x330x530x330x530x330x5
10
16
25
35
50
70
95
120
150
185
240
SipariflKodu
BLT - 251
BLT - 252
BLT - 253
BLT - 254
BLT - 255
BLT - 256
BLT - 257
BLT - 258
BLT - 259
BLT - 260
BLT - 261
A(mmxmm)
B (mm2)
25x325x525x325x525x325x525x325x525x325x525x325x525x325x525x325x525x325x525x325x525x325x5
10
16
25
35
50
70
95
120
150
185
240
SipariflKodu
BLT - 2010BLT - 2016BLT - 2025BLT - 2035BLT - 2050BLT - 2070BLT - 2095BLT - 2120BLT - 2150BLT - 2185BLT - 2240
A(mm2)
B (mm2)
10162535507095
120150185240
10162535507095
120150185240
Alüminyum Mono Tel
Galvaniz Çelik Halat
Galvaniz Mono Tel
SipariflKodu
BLT - 1253BLT - 1255BLT - 1303BLT - 1305BLT - 1403BLT - 1405
A(mmxmm)
B(mmxmm)
25x325x530x330x540x340x5
25x325x530x330x540x340x5
www.afielektrik.comE 10
Lama-Lama Ba¤lant› Klemensi
Galvaniz Topraklama fieridi
SipariflKodu
BGL - 3030BGL - 3035BGL - 4040BGL - 4045BGL - 5050BGL - 6050
Kesit(mmxmm)
Boy
30x3,0030x3,5040x4,0040x5,0050x5,0060x5,00
RuloRuloRuloRuloBoy
(6-8 mt.)Boy
(6-8 mt.)
SipariflKodu
Ø(mm)
Kesit(mm2)
Galvaniz Mono Tel
BGM - 8BGM - 10BGM - 12
81012
507095
SipariflKodu
Ø(mm)
Kesit(mm2)
Alüminyum Mono Tel
BAM - 8BAM - 10BAM - 12
89,5012
507095
SipariflKodu
Ø(mm)
Kesit(mm2)
Galvaniz Çelik Halat
BÇH - 8BÇH - 10BÇH - 12
81012
507095
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
BLK - 40BLK - 50
40x550x5
BLK - 30BLK - 8BLK - 10BLK - 12
30x3Ø 8
Ø 10Ø 12
BLK - A30BLK - A8BLK - A10BLK - A11BLK - A12BLK - A15
30x3 mm50 mm2
70 mm2
95 mm2
120 mm2
150 mm2
www.afielektrik.comE 11
Bak›r TopraklamaKroflesi
Galvaniz TopraklamaKroflesi
Galvaniz TopraklamaKroflesi
SipariflKodu
Ölçü SipariflKodu
Ölçü(mm)
SipariflKodu
Ölçü(mm)
Galvaniz Ba¤lant› Klemensleri SipariflKodu
A(mm)
B(mm)
L1(mm)
L2(mm)
Civata(Ø mm)
BLT - 3010BLT - 3020BLT - 3030BLT - 3040BLT - 3050BLT - 4010BLT - 4020BLT - 4030BLT - 4040BLT - 4050
30x330x330x330x330x340x440x440x440x440x4
30x3Ø 8
Ø 16Ø 20Ø 2640x4Ø 8
Ø 16Ø 20Ø 26
65656565658080808080
65656565658080808080
M.6M.6M.6M.6M.6M.8M.8M.8M.8M.8
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
SipariflKodu
BTÇ-2000
BTÇ-2005
BTÇ-2010
BTÇ-2050
Ømm
20
20
20
20
Lmm
1000
1500
1750
3000
SipariflKodu
BTÇ-1800
BTÇ-1895
BTÇ-1810
BTÇ-1850
Ømm
18
18
18
18
Lmm
1000
1500
1750
3000
SipariflKodu
BTÇ-1600
BTÇ-1605
BTÇ-1610
BTÇ-1650
Ømm
16
16
16
16
Lmm
1000
1500
1750
3000
Krom nikel ya da bak›r üzeri nikel kaplamal› tedarik edilebilir.
BSU-16 BAB-16 BÇT-16 BSU-10BSU-12
BÇT-10BÇT-12
BAB-10BAB-12
Beton Topraklama Rogar›
BTR-20300 x 300 x 300 mm
BTR-25400 x 400 x 400 mm
BTR-10Ø 300 mm
BTR-30600 x 600 x 600 mm
www.afielektrik.comE 12
Plastik Topraklama Rogar›
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Bak›r Topraklama Çubuklar›
Bak›r Topraklama Çubuk Aksesuarlar›
Topraklama Rogarlar›
YATAY TOPRAKLAMA ‹LETKEN‹ ‹LE TOPRAKLAMA UYGULAMASI
1) 10 cm. geniflli¤inde 75 cm. derinli¤inde bir kanal
kazarak taban› 2-3 cm. kal›nl›¤›nda topraklama
katk› malzemesi ile doldurun.
2) Katk› malzemelerinin üzerine iletkeni yerlefltirin.
3) 2-3 cm kal›nl›¤›ndaki katk› malzemesini iletkenin
üzerine dökün (iletkenin tamamen kapand›¤›ndan
emin olun).
4) Üzerini 10 cm kal›nl›¤›nda toprakla doldurun.
TOPRAKLAMA ÇUBU⁄U ‹LE UYGULAMA MONTAJI
1) Çubuk boyundan 15 cm. derin ve 8 cm.
geniflli¤inde bir çukur aç›n.
2) Çubu¤u deli¤e yerlefltirin ve klemens ba¤lant›lar›n›
yap›n.
3) Çubu¤un üst noktas›na kadar gerekli miktarda
katk› malzemesi ile doldurun.
4) Geri kalan bofllu¤u toprakla doldurun.
Elektrod Ba¤lant› Klemensi
C Tipi W Tipi S Tipi
M Tipi T Tipi K Tipi
Topraklama Katk› Maddesi
1 TORBA GEM’‹N DOLDURACA⁄I TAHM‹N‹ DER‹NL‹K (Yo¤unluk 1-142 Kg/m)
ÇUKUR DER‹NL‹⁄‹
ÇUKURÇAPI
(7.8 cm)(10 cm)
(12.7 cm)(15.2 cm)(20.3 cm)(25.4 cm)(22.9 cm)(30.5 cm)
223568
1012
(1.8m)
23579
121518
(2.7m)
469
1317222834
(5.2m)
470
1419253138
(5.8m)
47
101520263240
(1.8m)
23468
111316
(2.4m)
234579
1214
(2.1m)
1 TORBA GEM’‹N KANAL ‹Ç‹NDE KAPLANACA⁄I YAKLAfiIK TOPRAKLAMA ‹LETKEN‹ BOYU
KATKI MADDES‹N‹N TOPLAM KALINLI⁄I
KANALINGEN‹fiL‹⁄‹
(2.5 cm)
(4.3 m)
(2.3 m)
(2.1 m)
(1.7 m)
(1.4 m)
(5.1 cm)
(2.1 m)
(1.4 m)
(1.1 m)
(0.9 m)
(0.7 m)
(7.8 cm)
(1.4 m)
(0.9 m)
(0.7 m)
(0.6 m)
(0.5 m)
(10.2 cm)
(1.1 m)
(0.7 m)
(0.5 m)
(0.4 m)
(0.4 m)
(10 cm)
(15.2 cm)
(20.3 cm)
(25.4 cm)
(30.5 cm)
SipariflKodu
BÇK - A16BÇK - A18BÇK - A20
Ø(mm)
161820
35-7035-7035-70
Kesit(mm2)
SipariflKodu
BÇK - C16BÇK - C18BÇK - C20BÇK - C32
Ø(mm)
16182032
35-7035-7035-7035-70
Kesit(mm2)
SipariflKodu
BÇK - W16BÇK - W18BÇK - W20
Ø(mm)
161820
35-7035-7035-70
Kesit(mm2)
SipariflKodu
Ø(mm)
Kesit(mm2)
BÇK - S16BÇK - S18BÇK - S20
161820
35-7035-7035-70
SipariflKodu
BÇK - M161BÇK - M162BÇK - M163BÇK - M181BÇK - M182BÇK - M183
Ø(mm)
161616
18 - 2018 - 2018 - 20
25x3-25x530x3-30x540x3-40x525x3-25x530x3-30x540x3-40x5
Kesit(mm2)
SipariflKodu
BÇK - U16BÇK - U18BÇK - U20
Ø(mm)
161820
35-15035-15035-150
Kesit(mm2)
SipariflKodu
BÇK - T161BÇK - T162BÇK - T163BÇK - T164BÇK - T165BÇK - T181BÇK - T182BÇK - T183BÇK - T184BÇK - T185
Ø(mm)
1616161616
18 - 2018 - 2018 - 2018 - 2018 - 20
25x3-25x530x3-30x540x3-40x550x3-50x560x3-60x525x3-25x530x3-30x540x3-40x550x3-50x560x3-60x5
Kesit(mm2)
A Tipi
U Tipi
SipariflKodu
BÇK - K161BÇK - K162BÇK - K163BÇK - K164BÇK - K165BÇK - K181BÇK - K182BÇK - K183BÇK - K184BÇK - K185BÇK - K201BÇK - K202BÇK - K203BÇK - K204BÇK - K205
Ø(mm)
161616161618181818182020202020
50-7095120150185
50-7095120150185
50-7095120150185
Kesit(mm2)
www.afielektrik.comE 13
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Bak›r Ba¤lant› Klemensleri
PirinçTespit Klemensleri
Siparifl KoduA
mmmm2 Bmm
Dmm
Lmm
Ømm
BTP-2010
BTP-2015
BTP-2020
BTP-2025
10-35
35-70
70-150
150-185
8
10
16
18
14
17
29
33
18
21
28
31
22
25
39
45
M6M8M6M8M6M8M6M8
Pirinç Ek ve Tespit Klemensi (Alt› Köfle)
Siparifl KoduA
mmmm2 Bmm
Dmm
Lmm
Ømm
BTP-1010
BTP-1015
BTP-1020
BTP-1025
10-35
35-70
70-150
150-185
8
10
16
18
14
17
29
33
18
21
28
31
22
25
39
45
M6M8M6M8M6M8M6M8
Pirinç Ek ve Tespit Klemensi (Silindir)
BTP-16BTP-25BTP-35BTP-50BTP-70
BTP-120
10-1625355070
95-120
SipariflKodu
Kesit(mm2)
Prinç T›rnakli Klemens
BUP-6BUP-10BUP-16BUP-25BUP-35BUP-50BUP-70BUP-95
BUP-120
610162535507095
120
SipariflKodu
Kesit(mm2)
Prinç U Klemens
www.afielektrik.comE 14
Bak›r “C” Klemens
Siparifl Kodu Kesit (mm2)
BCK - 101BCK - 102BCK - 103BCK - 104BCK - 105BCK - 106BCK - 107BCK - 108
35 -5050 -5070 -7095 - 95
120 - 120150 - 150185 -185240 - 240
Bak›r “H” Klemens (Kalayl›)
Siparifl Kodu Kesit (mm2)
BHK - 201BHK - 202BHK - 203BHK - 204BHK - 205BHK - 206BHK - 207BHK - 208
35 -5050 -5070 -7095 - 95
120 - 120150 - 150185 -185240 - 240
Bak›r “C” Klemens (Kalayl›)
Siparifl Kodu Kesit (mm2)
BCK - 201BCK - 202BCK - 203BCK - 204BCK - 205BCK - 206BCK - 207BCK - 208
35 -5050 -5070 -7095 - 95
120 - 120150 - 150185 -185240 - 240
Bak›r “H” Klemens
Siparifl Kodu Kesit (mm2)
BHK - 101BHK - 102BHK - 103BHK - 104BHK - 105BHK - 106BHK - 107BHK - 108
35 -5050 -5070 -7095 - 95
120 - 120150 - 150185 -185240 - 240
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Bak›r Ba¤lant› Klemensleri
SipariflKodu
Kesit(mm2)
BDB-50BDB-70
5070
SipariflKodu
Kesit(mm2)
SipariflKodu
Kesit(mm2)
BPT-200 50
SipariflKodu
Kesit(mm2)
BPT-100 50
BHB-200 70-95
SipariflKodu
Kesit(mm2)
H Tipi Bak›r Ba¤lant›
BDB-5070 50-70
SipariflKodu
Kesit(mm2)
B Tipi Bak›r Dörtlü Ba¤lant›
SipariflKodu
Kesit(mm2)
BPB-101BPB-102
5070
BPB-201BPB-202
5070
SipariflKodu
Kesit(mm2)
B Tipi Paralel Ba¤lant›A Tipi Paralel Ba¤lant›
www.afielektrik.comE 15
A Tipi Prinç Dörtlü Ba¤lant›
A Tipi Bak›r Dörtlü Ba¤lant›
B Tipi Prinç Dörtlü Ba¤lant› H Tipi Prinç Ba¤lant›
BHB-100 70-95
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
Kalayl› Yass› BaraTavl› Yass› Bara
SipariflKodu
BFB-106BFB-110BFB-116BFB-125BFB-135BFB-150BFB-170
Kesitmm2
SipariflKodu
6101625355070
BFB-206BFB-210BFB-216BFB-225BFB-235BFB-250BFB-270
Eflpotansiyel Bara
Tip 3 Bak›r Eflpotansiyel Bara
SipariflKodu
BEP-15005BEP-15010BEP-15015BEP-15020BEP-15025BEP-15030BEP-15035BEP-15040BEP-15045BEP-15050BEP-15055BEP-15060BEP-15065BEP-15070
300500300500300500300500300500300500300500
30x530x540x540x5
40x1040x1050x550x5
50x1050x1060x560x5
60x1060x10
Kesit(mmxmm)
L(mm)
Kalay kapl› vegalvaniz kapl›tedarik edilebilir.
BEP-13010
BEP-14010
SipariflKodu
BEP-18005BEP-18010BEP-18015BEP-18020BEP-18025BEP-18030BEP-18035BEP-18040BEP-18045BEP-18050BEP-18055BEP-18060BEP-18065BEP-18070
300500300500300500300500300500300500300500
30x530x540x540x540x1040x1050x550x550x1050x1060x560x560x1060x10
Kesit(mmxmm)
L(mm)
Çift Ay›r›c›l› Bak›r Eflpotansiyel Bara
SipariflKodu
BEP-17005BEP-17010BEP-17015BEP-17020BEP-17025BEP-17030BEP-17035BEP-17040BEP-17045BEP-17050BEP-17055BEP-17060BEP-17065BEP-17070
300500300500300500300500300500300500300500
30x530x540x540x540x1040x1050x550x550x1050x1060x560x560x1060x10
Kesit(mmxmm)
L(mm)
Kalayl› Yass› BaraTavl› Yass› Bara
SipariflKodu
BFB-1006BFB-1010BFB-1016BFB-1025BFB-1035BFB-1050BFB-1070BFB-1095BFB-1120BFB-1150BFB-1185
Kesitmm2
SipariflKodu
610162535507095120150185
BFB-2006BFB-2010BFB-2016BFB-2025BFB-2035BFB-2050BFB-2070BFB-2095BFB-2120BFB-2150BFB-2185
www.afielektrik.comE 16
Tavl› Flexible BaralarTeknik resim ölçülendirildi¤inde ihtiyacauygun izoleli ve izolesiz tavl› flexiblebara yapmak mümkündür.
Kalayl› Flexible BaralarTeknik resim ölçülendirildi¤inde ihtiyacauygun izoleli ve izolesiz kalayl›› flexiblebara yapmak mümkündür.
Yaprak Folyo Bak›r BaralarTeknik resim ölçülendirildi¤inde ihtiyacauygun izoleli ve izolesiz yaprak folyobak›r bara yapmak mümkündür.
Tek Ay›r›c›l› Bak›r Eflpotansiyel Bara (Kalayl›)
Flexible Baralar
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart
BKP-ABKP-CBKP-D
ACD
SipariflKodu
PotaTipi
BKP-P1BKP-P2
CD
SipariflKodu
PotaTipi
BKT-15BKT-25BKT-32BKT-45BKT-65BKT-90
BKT-115BKT-150BKT-200BKT-250
152532456590
115150200250
SipariflKodu
PotaTipi
BKP-Ç BKP-K
BKP-F
www.afielektrik.comE 17
Kaynak Potas› Termo Kaynak TozuPota Pensesi
Montaj Örnekleri
LIGHTNING & GROUNDINGTopraklama ve Y›ld›r›mdan Korunma-IEC Standart