lighting - scolmore lighting.pdf · lighting affects our environment and how we feel about it. what...
TRANSCRIPT
scolmore.com
LIGHTING CATALOGUE
Issue Six
Lighting affects our environment and how we feel about it. What you light and how you light it can impact on every facet of life and affect mood and atmosphere.
Lighting is a very subjective issue and this is why it is so important to provide a wide
to satisfy individual tastes in illuminating the environment which we occupy.
The Ovia® lighting collection featured in the following pages has been put together with these objectives in mind, ie. to offer as wide
providing optimum performance and energy saving technology.
No matter how good the product and how attractive a design, it is of little practical value to designers and installers unless stocks are readily available. We have invested heavily in our central distribution facility at the hub of the UK motorway network.
Our 100,000 ft² premises in Tamworth provide in depth stocking of all product lines and on-line ordering is supported by automated order picking and processing procedures which we believe offer unprecedented service levels within our industry.
Our own distribution activities are supported by a chain of Approved Electrical Wholesale Stockists throughout the UK and Ireland and many countries overseas.
We have a dedicated and professional team of regional sales and business development personnel operating in each of these areas and they can be called upon at any time to assist our customers with any queries they may have. In summary, we take lighting very seriously. All of the products in this catalogue are covered by a minimum of 12 months warranty against any fault in material or manufacture. In addition, we are constantly striving to improve standards in all aspects of our business ranging from product design and production through to the marketing of our products and the ultimate delivery of the required goods to our customers at the right time.
A wide range of indoor and outdoor lighting solutions are featured in the following pages. Our technical and sales staff are available to assist with any lighting queries.
High stocks of all standard products are available to service next day delivery to our extensive range of Stockists.
Welcome to Ovia® Lighting...a comprehensive range of indoor & outdoor lighting
Email: [email protected] Visit: scolmore.com
Call: 01827 63454 Fax: 01827 63362
Simple Connectivity & Control
We also sell WIRING ACCESSORIES
Please contact us to order your Wiring Catalogue.Ple
Wiring Accessories for a Smarter Home
Decorative Metal & Moulded Plastic
Wiring AccessoriesInterchangeable
Plates & Modules
The updated site now incorporates a number of improved features that allow users to access new information directly and easily:
Online Ordering
• Ordering 24 hours a day 7 days a week with the ability to check current stock levels as required, meaning you are not restricted to ordering during normal office hours
• Access to on-line catalogues will keep you fully updated with the complete product range and provide information on new products as and when they become available
• The order tracking service keeps you up to date with the progress of your shipment
• Managing your administration paper work is now even easier with instant access to reports and essential documents at a click of a button
• A ‘quick buy tab’ and the ability to store the most common orders for repeated use, adds to the versatility and flexibility of the revised system.
To Register: E-mail us at [email protected] or call our Sales Office on 01827 63454 and one of our Sales Representatives will be more than happy to get you on-line.
www.scolmore.commore.re.com
The new app from Click® Scolmore allows you to use your smart phone to browse our complete range of products, add products to your Favourites or to the Quote Basket. The app then allows you to email the contents of the basket back to yourself providing all the information you need to obtain any quotations.
With over 6000 products currently available you can use the search facility to easily locate the products required and if you require further information there’s an option to email us or find us on the map straight from the app.
An added bonus is the app being 100% native means you don’t have to be connected to the internet to use it.
Scolmore app
Need to set up an account? Call: 01827 63454 or Email: [email protected]
So, why not click and find out how we can help you?
Are you a Click® stockist? If so, you automatically have access to the Marketing Hub. Download all our latest literature, flyers to personalise and our full range of images for use on your website or artwork. Follow the links from www.scolmore.com for more information.
Need to set up an account? Call: 01827 63454 or Email: [email protected]
Marketing Hub
Have you ed yet?Visit www.scolmore.com to see our new website, packed with new features and easier navigation.
www.scolmore.com
NEW PRODUCTS to look out for...
A cost saving fire rated solution.
See Page A20
A compact, fire rated dimmable downlight.
See Page A10
Cutting edge technology with an adjustable colour temperature switch.
See Page A4
Contents
Inceptor® Omni A4
Inceptor® Nano5 A10
Inceptor® Pico A16
Inceptor® Pico FG A20
Inceptor® Evo A25
Inceptor® Accessories A34
LED Surface Lights B38
LED Wall Lights B47
Wall Lights B48
Klarheit Fittings B52
Undercupboard Lights B55
LED Strip Lighting B56
Modular LED Stair Lights B58
New Media™ Plates B59
Fixed Downlights C62/C70
Adjustable Downlights C63
Downlight Housing C64/C71
Cast Downlight Bezels C65/C72
Recessed Downlights C66
Cast Fixed Downlights C68
Suspended Pendant Fittings D74
Emergency Signs E82
Integrated LED Lighting
Indoor Lighting
Know the code? See the back of this catalogue for the product code index
GU10 Fixed Downlights H138/H144
GU10 Adjustable Downlights H139
Cast Fixed Downlights H140/H145
Cast Adjustable Downlights H141
GU5.3 Fixed Downlights H142
GU5.3 Adjustable Downlights H143
Downlight Housing H147
Back Boxes H150
Flow™ Distribution Hubs I162
Flow™ Connectors I164
LED Lamps J172
Lamps J176
Transformers J177
Fire & Acoustic Rated Downlights
Simple Connectivity & Control
Lamps & Accessories
Outdoor LED F96
Outdoor Bulkhead F108
Outdoor General F113
Outdoor Bollards G124
Outdoor Lighting
INCEPTOR LIGHTING
The Inceptor® lighting range combines a number of key features which we believe sets it apart from competitor products. Firstly each product within the range comes with integrated LED and driver.
Scolmore has also integrated its popular Flow™ Connectors into the majority of the range, creating a range of lighting which is quick and easy to install as well as to remove and replace for the purpose of circuit testing. All of the products in our Inceptor® range can be used with our Click Smart Wiring Accessories, providing simple, flexible installation and complete control.
The Inceptor® Omni, Inceptor® Nano5 and Inceptor® Pico FG incorporate our award-winning FlameGuard® system technology, which offers a 30, 60 & 90 minute fire rating and is acoustic and airflow compliant.
See page A4 See page A10 See page A20
The adjustable colour temperatue Inceptor® Omni provides cutting
edge features at a competitive price.
The Inceptor® Nano5 range comprises two compact, fire-rated,
dimmable downlights.
The Inceptor® Pico FG is ideal for installations where the void depth
is limited.
The Inceptor® Lighting Range is perfect for all types of installation...
NEW to the Range
The adjustable colour
ContentsA4 Inceptor® Omni
A6 Inceptor® Omni Construction
A8 Inceptor® Omni Technical Info
A10 Inceptor® Nano5
A12 Inceptor® Nano5 Construction
A14 Inceptor® Nano5 Technical Info
A16 Inceptor® Pico
A17 Inceptor® Pico Construction
A18 Inceptor® Pico Technical Info
A20 Inceptor® Pico FG
A21 Inceptor® Pico FG Construction
A22 Inceptor® Pico FG Technical Info
A24 Inceptor® Converter Plates
A25 Inceptor® Evo Intro
A26 Inceptor® Evo Construction
A28 Inceptor® Evo
A31 Inceptor® Evo Metal Housing
A32 Inceptor® Evo Technical Info
A34 Inceptor® Accessories
OVIA® LIGHTING
A4
INC
EPTO
R®
A4
INC
EPTO
R®
LED
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
Please add required finish in to the code e.g. LED4600CH7D
WW CW DL
IP65
230V 7W COB LED IP65 Inceptor® Omni Integrated Dimmable Downlights
Code Description
LED4600WH7D 230V 7W COB LED Dimmable Downlight - Colour Temperature Switch - White
LED4600CH7D 230V 7W COB LED Dimmable Downlight - Colour Temperature Switch - Chrome
LED4600SC7D 230V 7W COB LED Dimmable Downlight - Colour Temperature Switch - Satin Chrome
Inceptor® Omni
Emergency Pack available, please see page A34
IEC TR 62778: 2014 EN 62493: 2010 EN 55015: 2013 EN 61547: 2009 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 60598-1: 2015 EN 60598-2-2: 2012 2014/35/EUFire, Acoustic & Airflow: BS 476: Part 21: 1987 EN 1365-2: 2014 BS EN ISO 10140-2: 2010 BS EN ISO 10140-3: 2010+A1: 2015 BS 5250: 2011
Featuring Flow™ and FlameGuard® technologyProduct Approvals
A5
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Available Finishes
IP54
IP54 Inceptor® Omni Adjustable Bezels
Code Description
BZ4605WH Omni Adjustable Bezel - White
BZ4605CH Omni Adjustable Bezel - Chrome
BZ4605SC Omni Adjustable Bezel - Satin Chrome
Inceptor® Omni
WH SC CH
OVIA® LIGHTING
A6
INC
EPTO
R®
A6
INC
EPTO
R®
Inceptor® Omni Construction
Adding the insulation support helps create an air space allowing heat to dissipate and reduce temperatures.
The Inceptor® Omni’s high powered compact driver has been designed to be as small as possible whilst still being suitable for installation in a fire rated ceiling.
The custom-built, multifaceted lens gathers the natively broad beam of the COB LED and focuses the emitted light into a series of predefined beam angles to best replicate a traditional halogen lamp (at 2700K).
Our dual-phosphor COB architecture has been meticulously calibrated to deliver 3 crisply defined colour temperatures from a single-point light source.
The bezels for the Omni have a twist and lock feature and can be quickly and easily replaced as required. There is the choice of 3 different finishes in both fixed and adjustable options
Optional insulation support
Compact driver
Faceted lens (halogen effect)
Dual-phosphor chip-on-board
User-changeable fixed & adjustable bezels
A7
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Omni Construction
Our trademark blue strip of intumescent adds an extra barrier of protection against fire by expanding to fill the gap between the plasterboard and light fitting.
Ensures that water does not enter ceiling void through or around the fitting and seals the unit making it suitable for kitchens and bathrooms.
Our patented, multi-functional heat sink not only channels heat away from the LED chip, it also grants the unit’s ability to adapt from fixed to adjustable.
Trademark intumescent strip
Multiple moisture seals
Improved cooling
Flow™ connectorFlow™ is Click® Scolmore’s pre-wired connection system designed to speed up installation and allows even faster removal for testing and replacement of components. It also allows the quick and simple removal of the unit when carrying out routine maintenance or circuit testing, meaning testing procedures can be carried out quickly, accurately and effectively, with minimum disruption.
Insulation support bracketThe removable insulation support clip fixes directly onto the Omni. This means insulation is lifted away from the unit, maintaining a minimum air space and helping any generated heat to dissipate. Lowering the temperature around the fitting can extend the life of the unit.
Fire-Rated
30 60 90Minutes
OVIA® LIGHTING
A8
INC
EPTO
R®
A8
INC
EPTO
R®
Inceptor® Omni Technical Information
TECHNICAL INFORMATION
General information Standard version
Dimmable/non dimmable Dimmable
LED colour temperatures available 2700K (warm white) 4200K (cool white) 6500K (daylight)
Finish colours available White (WH), Chrome (CH) or Satin Chrome (SC)
Adjustable bezels available BZ4605CH (Chrome), BZ4605SC (Satin Chrome), BZ4605WH (White)
Material composition Steel, Aluminium, ABS, Nylon & Polycarbonate
Cut-out 65-70mm (fixed & adjustable)
Ceiling thickness 5-40mm
Ceiling void depth 65mm+, 85mm+ (with insulation support bracket)
Dimensions height Height 65mm, 85mm (with insulation bracket), Diameter 85mm
Warranty registered: Registered: 5 Years Unregistered: 2 Years
Weight 0.325Kg
Light output information
Output wattage (approx) 5.6W
CRI >80
LED lifetime (L70) (L70) 25,000 hrs
Total luminous flux (useful) 500lm (430lm) 580lm (480lm) 550lm (450lm)
Beam angle 40° 50° 65°
Total luminous efficacy (effective) 71 lm/W (61 lm/W) 83 lm/W (69 lm/W) 79 lm/W (64 lm/W)
Power factor 0.9
Driver information
Connection Pre-wired FlowTM connector
Input 220-240Vac / Rated 7W
Output 160mA / 35V DC
Switching cycles 20,000
Critical temperature 80°C
Part L1 Compliancy (as of 2014) Yes
Part L2 Compliancy (as of 2014) Yes
Regulation ratings
Fire rating 30, 60 & 90 minute
Ingress protection rating IP65 (Zone 1), IP54 with adjustable bezel
Acoustic rating 0dB (zero impact on sound insulation)
Air flow BS 5250: 20011 compliant (0.06M3/hr)
A9
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Omni Technical Information
Omni Features
The Omni features a built-in three position switch which grants the ability to change the colour temperature instantly.
The Inceptor® Omni combines cutting-edge chip-on-board LED technology and a custom built multifaceted lens to deliver a quality of light comparable to traditional light sources such as halogen lamps.
Switchable colour temperature
65M
M L
OW
PR
OFI
LE
4200K50° BEAM ANGLECOOL WHITE
580LM
2700K40° BEAM ANGLEWARM WHITE
500LM
6500K65° BEAM ANGLE
DAYLIGHT550LM
65-70MMCUT-OUT
5 YEARWARRANTY(Registered)
Flexibility and ease of installation are the key factors in the design of this product.
Existing technology found in the current Inceptor® products and innovative new features have been combined within one fitting, providing cutting-edge features at a competitive price.
Key features include an adjustable colour temperature switch, allowing the selection of colour temperatures to suit the installation.
The fitting also has the option to change bezels from a fixed version to adjustable option if required and a removable Insulation Support Clip is provided for use when insulation is present.
OVIA® LIGHTING
A10
INC
EPTO
R®
A10
INC
EPTO
R®
LED
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
IP65
Please add required finish in to the code e.g. LED5400CH5WD
WW CW
Inceptor® Nano5
230V 4.8W LED IP65 Inceptor® Nano5 Integrated Fixed Dimmable Downlights
Code Description
LED5400WH5WD 230V 4.8W LED Fixed Dimmable Downlight - Warm White - White
LED5400CH5WD 230V 4.8W LED Fixed Dimmable Downlight - Warm White - Chrome
LED5400SC5WD 230V 4.8W LED Fixed Dimmable Downlight - Warm White - Satin Chrome
LED5400WH5CD 230V 4.8W LED Fixed Dimmable Downlight - Cool White - White
LED5400CH5CD 230V 4.8W LED Fixed Dimmable Downlight - Cool White - Chrome
LED5400SC5CD 230V 4.8W LED Fixed Dimmable Downlight - Cool White - Satin Chrome
ISC1020 Insulation Support Bracket - suitable for use with Nano5 & Pico FG
Featuring Flow™ and FlameGuard® technology
Emergency Pack available, please see page A34
IEC TR 62778: 2014 EN 62493: 2010 EN 55015: 2013 EN 61547: 2009 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 60598-1: 2015 EN 60598-2-2: 2012 2014/35/EUFire, Acoustic & Airflow: BS 476: Part 21: 1987 EN 1365-2: 2014 BS EN ISO 10140-2: 2010 BS EN ISO 10140-3: 2010+A1: 2015 BS 5250: 2011
Product Approvals
A11
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
LED
Please add required finish in to the code e.g. LED5405CH5WD
IP54
WW CW
Inceptor® Nano5
230V 4.8W LED IP54 Inceptor® Nano5 Integrated Adjustable Dimmable Downlights
Code Description
LED5405WH5WD 230V 4.8W LED Adjustable Dimmable Downlight - Warm White - White
LED5405CH5WD 230V 4.8W LED Adjustable Dimmable Downlight - Warm White - Chrome
LED5405SC5WD 230V 4.8W LED Adjustable Dimmable Downlight - Warm White - Satin Chrome
LED5405WH5CD 230V 4.8W LED Adjustable Dimmable Downlight - Cool White - White
LED5405CH5CD 230V 4.8W LED Adjustable Dimmable Downlight - Cool White - Chrome
LED5405SC5CD 230V 4.8W LED Adjustable Dimmable Downlight - Cool White - Satin Chrome
ISC1020 Insulation Support Bracket - suitable for use with Nano5 & Pico FG
Emergency Pack available, please see page A34
Featuring Flow™ and FlameGuard® technology
IEC TR 62778: 2014 EN 62493: 2010 EN 55015: 2013 EN 61547: 2009 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 60598-1: 2015 EN 60598-2-2: 2012 2014/35/EUFire, Acoustic & Airflow: BS 476: Part 21: 1987 EN 1365-2: 2014 BS EN ISO 10140-2: 2010 BS EN ISO 10140-3: 2010+A1: 2015 BS 5250: 2011
Product Approvals
OVIA® LIGHTING
A12
INC
EPTO
R®
A12
INC
EPTO
R®
Inceptor® Nano5 Construction
The Inceptor® Nano5 has a custom-built, high-powered and extremely compact driver, designed to deliver maximum power in the smallest possible space.
The steel body, together with the Intumescent band, provides the fittings’ 30, 60 & 90 minute fire-ratings. The unique twin-section bracket has been optimised to provide maximum heat deflection for the lowest possible weight.
The optics platform comprises an aluminium body which holds the Lens creating a 40° beam angle.
Ensures that water does not enter ceiling void through or around the fitting and seals the unit making it suitable for kitchens and bathrooms.
The custom-built, multifaceted lens gathers the natively broad beam of the SMD LED and focuses the emitted light into a 40° beam angle to provide a clean, crisp light that rivals a traditional halogen lamp.
Compact driver
Fire-rated body
Optics platform
Moisture seals
Faceted lens (halogen effect)
A13
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Nano5 Construction
SMD LED’s require lower current and create less heat than standard LEDs, perfect when space is at a premium.
Our trademark blue strip of intumescent adds an extra barrier of protection against fire by expanding to fill the gap between the plasterboard and light fitting.
The engine combines a 4.8W Dimmable driver, Cast Aluminium Heat Sink and SMD LED chip together with a Flow™ connector for straight-to-mains connection.
SMD LED technology
Trademark intumescent strip
Engine
Flow™ connectorFlow™ is Click® Scolmore’s pre-wired connection system designed to speed up installation and allows even faster removal for testing and replacement of components. It also allows the quick and simple removal of the unit when carrying out routine maintenance or circuit testing, meaning testing procedures can be carried out quickly, accurately and effectively, with minimum disruption.
Insulation support clipThe removable Insulation Support Clip has been developed to allow installers to lay thermal insulation directly over the top of the Inceptor® Nano5. It creates a 20mm air-space above the driver which allows air to circulate and cool. This allows the driver to dissipate heat more effectively and in-turn allows the luminaire to run cooler.
Flow™ connector
l ti t li
ISC1020 sold separately, see page A34
Fire-Rated
30 60 90Minutes
OVIA® LIGHTING
A14
INC
EPTO
R®
A14
INC
EPTO
R®
Inceptor® Nano5 Technical Information
TECHNICAL INFORMATION
General information Standard version
Dimmable/non dimmable Dimmable
LED colour temperatures available 2700K (warm white) 4000K (cool white)
White (WH), Chrome (CH) or Satin Chrome (SC)
Material composition Steel, Aluminium, ABS, Nylon & Polycarbonate
Cut-out
Ceiling thickness 5-40mm
Ceiling void depth 45mm+, 54mm (adjustable)
Dimensions height (adjustable)
Standard warranty 2 Years
Weight (adjustable)
Light output information
Output wattage (approx) 3.8W
CRI >80
LED lifetime (L70) 25,000 hrs
400lm 450lm
Beam angle 40°
71 lm/W 81 lm/W
Power factor 0.8
Driver information
Connection Pre-wired Flow™ connector
Input 220-240Vac / Rated 4.8WMAX
Output 75mA / 50V DC
Switching cycles 20,000
Critical temperature 80°C
Part L1 Compliancy (as of 2014) Yes
Part L2 Compliancy (as of 2014) Yes
Regulation ratings
Fire rating 30, 60 & 90 minute
Ingress protection rating
Acoustic rating 0dB (zero impact on sound insulation)
BS 5250: 2011 compliant (0.06M3/hr)
A15
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Nano5 Technical Information
Nano5 Features 54M
M LO
W PR
OFILE45
MM
LO
W P
RO
FILE
The Inceptor® Nano5 range comprises two compact, fire-rated, dimmable downlights, which pack an array of features into their shallow profile. The Nano5 consumes less power and produces a comparable light output while reducing the size & cost.
With a highly competitive price point for the features and benefits offered, the high-performance, 4.8W LED lighting products are designed to have mass market appeal and are suitable for a variety of uses in domestic applications.
60MMCUT-OUT
75MMCUT-OUT
2 YEARWARRANTY
4000K40° BEAM ANGLECOOL WHITE
450LM
2700K40° BEAM ANGLEWARM WHITE
400LM
OVIA® LIGHTING
A16
INC
EPTO
R®
A16
INC
EPTO
R®
WH SC CH
IP65
Please add required finish in to the code e.g. LED3500CH5CD
Includes moisture seal. LED’s are integrated and non-replaceable.Emergency Pack available, please see page A34
230V 5.5W LED IP65 Inceptor® Pico Integrated Dimmable Downlights
Code Description
LED3500CH5CD 230V 5.5W LED Dimmable Downlight - Cool White LED - Chrome
LED3500SC5CD 230V 5.5W LED Dimmable Downlight - Cool White LED - Satin Chrome
LED3500WH5CD 230V 5.5W LED Dimmable Downlight - Cool White LED - White
LED3500CH5WD 230V 5.5W LED Dimmable Downlight - Warm White LED - Chrome
LED3500SC5WD 230V 5.5W LED Dimmable Downlight - Warm White LED - Satin Chrome
LED3500WH5WD 230V 5.5W LED Dimmable Downlight - Warm White LED - White
WW CW
Inceptor® Pico
2014/35/EU EN 60598-1:2015 EN 60598-2-2:2012 EN 61347-2-13:2014 EN 62471:2008 EN 55015:2013+A1:2015 EN 61547:2009 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 62493:2010
LED
Dimensions
Available Finishes
Colour Temperatures
65-75mm (cut-out)
83mm
47m
m
Product Approvals
A17
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Pico Technical Construction
A terminal cover with built-in cable-grip both saves time and ensures that no strain is placed on the terminal connections.
Surface mounted LED have high reliability performance and utilise very little power, resulting in low energy consumption which offers a cost saving solution against that of traditional lamps.
Loop in and out terminals allow easier connection
of multiple fittings (daisy-chain). The fitting is
double- insulated and no Earth is required.
Screw down cable-grip
SMD LED technology
Loop in & out terminals
Full Polymer body to ensure no weather erosion.
Single Piece Moulded Body
The fitting should not be covered in thermal insulation. We recommend leaving 50mm around and 20mm above the fitting to allow sufficient room for cooling.
Insulation 20MM
50MM50MM
OVIA® LIGHTING
A18
INC
EPTO
R®
A18
INC
EPTO
R®
Inceptor® Pico Technical Information
TECHNICAL INFORMATION
General Information Standard
Dimmable/non-dimmable Dimmable
Finish colours available Chrome, Satin Chrome and White
LED colour temperatures available 2700K (warm white) 4000K (cool white)
Luminous flux (typ) 350Lm 390Lm
Luminous efficacy (typ) 63Lm/W 70Lm/W
LED quantity 5
RA (min) >80
SDCM
Lifetime (L70) 20,000
Safety class Class II
IP rating IP65
Cut-out 65mm - 75mm
Ceiling thickness 5mm-25mm
Height 47mm
Beam angle 90°
Driver information
Input voltage 220-240V~
Input current 32mA
Input frequency 50/60Hz
Input wattage 5.5W
Power factor 0.8
Output voltage 45Vdc
Output current 100mA
Tc (surface temp) 80°C
Ta (ambient max) 40°C
A19
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Pico Technical Information
The Inceptor® Pico offers a cost effective LED solution whilst producing an excellent light output for the power utilised. The fitting combines a number of key features which sets it apart from competitor products. The Inceptor® Pico is ideal for installations where the void depth is limited and is an ideal solution for non fire-rated applications.
Once installed, ingress protection is applied making the Pico dust tight and offers protection against low pressure water jets. This makes the Pico an ideal solution for kitchens, bathrooms and wet rooms.
As well as being suitable for variable ceiling board thickness whether plasterboard or wooden panelling. The Pico has an adaptable cut-out and will fit apertures of 65mm to 75mm diameter.
The Inceptor® Pico downlight design utilises a lens constructed from high quality polycarbonate. The frosted front provides improved beam angle resulting in a smoother distribution of light.
Pico Features
45M
M L
OW
PR
OFI
LE
2 YEARWARRANTY
65-70MMCUT-OUT
The Inceptor® Pico has an energy saving rating of A+ and an L70 LED lifetime of 20,000 hours resulting in zero maintenance, low energy consumption for the lifetime of the product.
Energy efficient4000K
90° BEAM ANGLECOOL WHITE
390LM
2700K90°BEAM ANGLEWARM WHITE
350LM
OVIA® LIGHTING
A20
INC
EPTO
R®
A20
INC
EPTO
R®
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
Inceptor® Pico FG
WW CW
230V 5.5W LED IP65 Inceptor® Pico Fire Rated Integrated Dimmable Downlights
Code Description
LED3600CH5CD 230V 5.5W LED Fire Rated Dimmable Downlight - Cool White LED - Chrome
LED3600CH5WD 230V 5.5W LED Fire Rated Dimmable Downlight - Warm White LED - Chrome
LED3600SC5CD 230V 5.5W LED Fire Rated Dimmable Downlight - Cool White LED - Satin Chrome
LED3600SC5WD 230V 5.5W LED Fire Rated Dimmable Downlight - Warm White LED - Satin Chrome
LED3600WH5CD 230V 5.5W LED Fire Rated Dimmable Downlight - Cool White LED - White
LED3600WH5WD 230V 5.5W LED Fire Rated Dimmable Downlight - Warm White LED - White
ISC1020 Insulation Support Bracket - suitable for use with Nano5 & Pico FG
IP65LED
Includes moisture seal. LED’s are integrated and non-replaceable.Emergency Pack available, please see page A34
Product Approvals
EN 60598-1: 2014 EN 60598-2-2: 2012 IEC 61347-2-13: 2014 BS EN 60529: 1992+A2: 2013 2014/35/EUFire, Acoustic & Airflow: BS 476: Part 21: 1987 EN 1365-2: 2014 BS EN ISO 10140-2: 2010 BS EN ISO 10140-3: 2010+A1: 2015 BS 5250: 2011
Featuring FlameGuard® technology
Please add required finish in to the code e.g. LED3600CH5CD
A21
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Pico FG Construction
To complement existing installations of the original Pico the Pico FG uses the same Bezel and Lens so
once installed they look identical, this also means the Pico FG achieves the same IP65 rating.
IP65 Bezels
A terminal cover with built-in cable-grip both saves time and ensures that no strain is placed on the terminal connections.
Screw Down Cable-Grip
The pre attached fly lead provides easier installation
for contractors.
30cm Fly Lead
Height of spring brackets has been increased to allow the product to be installed in ceiling thicknesses of 36mm.
Spring Brackets & Springs
Steel can and intumescent band provide fire barrier. 30, 60 and 90 minute fire rating.
Intumescent Band
Surface mounted LED have high reliability performance and utilise very little power,
resulting in low energy consumption which offers a cost saving solution against that of
traditional lamps.
SMD LED TechnologyDiffuser
No Visible LED Spots.
Driver PCB
Integrated Dimmable Driver.
Acoustic, air flow and moisture resistant.
Moisture Seal
Fire-Rated
30 60 90Minutes
OVIA® LIGHTING
A22
INC
EPTO
R®
A22
INC
EPTO
R®
Inceptor® Pico FG Technical Information
TECHNICAL INFORMATION
General Information Inceptor® Pico FG
Dimmable/Non-Dimmable Dimmable
LED Type 2835-9V-1W
Finish Colours Available Chrome, Satin Chrome and White
LED Colour Temperatures available 2700K (Warm) 4000K (Cool)
Luminous Flux (typ) 350Lm 390Lm
Luminous Flux (min) 351Lm 351Lm
Useful Luminous Flux 230Lm 260Lm
63Lm/W 70Lm/W
LED quantity 5
RA (min) >80
SDCM
Lifetime (L70) 20,000
Safety Class Class II
IP Rating IP65
Cut-Out 70mm - 75mm
Ceiling Thickness 5mm-36mm
Height 52mm
Ceiling Void Depth >50mm
Beam Angle 90o
Driver information
Input Voltage 220-240V~
Input Current 32mA
Input Frequency 50/60Hz
Input Wattage 5.5W
Power Factor 0.8
Output Voltage 45Vdc
Output Current 100mA
82%
Tc (surface Temp) 80°C
Ta (ambient max) 40°C
For compatible dimmer switches please contact our technical department on 01827 63454.
A23
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Pico FG Technical Information
Pico FG Features
Ideal for installations where the void depth is limited and fire rating is required. Pico FG has an adaptable cut-out to fit apertures of 70mm to 75mm diameter, and is suitable for install into ceiling thicknesses of up to 36mm due to its heightened spring brackets.
Our latest Inceptor® downlight utilises a lens constructed from high quality polycarbonate. The frosted front provides improved beam angle resulting in smoother light distribution.
Once installed, ingress protection is applied making the Pico FG dust tight and offers protection against low pressure water jets, an ideal solution for kitchens, bathrooms and wet rooms.
Dimmable as standard Pico FG can be easily switched or dimmed utilising a variety of methods. It is suitable for use with the Click® Smart range - more details can be found at www.click-smart.com.
52M
M L
OW
PR
OFI
LEInsulation support clipThe removable Insulation Support Clip has been developed to allow installers to lay thermal insulation directly over the top of the Inceptor® Pico FG. It creates a 20mm air-space above the driver which allows air to circulate and cool. This allows the driver to dissipate heat more effectively and in-turn allows the luminaire to run cooler.
ISC1020 sold separately, see page A34
2 YEARWARRANTY
70-75MMCUT-OUT
The Inceptor® Pico has an energy saving rating of A+ and an L70 LED lifetime of 20,000 hours resulting in zero maintenance, low energy consumption for the lifetime of the product.
Energy efficient
4000K90° BEAM ANGLECOOL WHITE
390LM
2700K90°BEAM ANGLEWARM WHITE
350LM
OVIA® LIGHTING
A24
INC
EPTO
R®
A24
INC
EPTO
R®
Dimensions
Converter Plate 120mm for use with Inceptor® Downlights
Code Description
SP4120CH Converter Plate - Chrome
SP4120SC Converter Plate - Satin Chrome
SP4120WH Converter Plate - White
Inceptor® Converter Plates
For use with the standard Pico and Nano5 Downlights, (Excludes Inceptor® Nano5 Adjustable). Allows Inceptor®
WH SC CH
Available Finishes
D
A25
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Evo Features
The Inceptor® Evo was born with the contractor in mind. Installation of the bulkhead is made faster with the addition of the Flow™connector. Simple removal of the surface mount adaptor ring allows the product to be semi-recess mounted with ease.Available in two designs; circular and eyelid, Both utilise opal optical-grade polycarbonate diffusers and a reinforced, impact-resistant polycarbonate body. The product is double insulated and an earth-loop terminal is provided for convenience.The Evo is available with 4 distinct modes of operation:
• Standard driver• Microwave sensor• 3 hour emergency• 3 hour emergency & microwave sensor
Inceptor® Evo
Rear cable access can be achieved via the rubber grommet located in the centre. Suitable for use with 20mm and 25mm conduit fixings.
Prevent unauthorised access, theft or removal of the luminaire. This makes the Evo particularly suitable for public areas such as schools and shopping malls.
One rear and four side entry points
Anti-tamper screw (PC housing)
The twist and lock process saves time during the installation which simplifies the maintenance and servicing of the luminaire.
Fast-fit twist and lock installation
OVIA® LIGHTING
A26
INC
EPTO
R®
A26
INC
EPTO
R®
Inceptor® Evo Construction
Attaches to base using twist and lock mechanism. Secures diffuser in position.
Creates an even spread of light which eliminates bright spots and reduces glare from LED array.
Contains up to 170 LED’s to create a uniform spread of light.
Allows the fitting to be secured into place for semi-recess mount installations.
Circular style fascia
Diffuser
LED array
Recess bracket
A27
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Evo Construction
• Switches bulkhead on when presence is detected.
• Reduces unnecessary energy use.
• Time adjustment between 8 secs to 20 minutes.
• Daylight sensor adjustment between 2 – 2000 lux.
• Detection adjustment between 1 to 10 meters.
• Suitable for switching loads of up to 1000W.
• Microwave sensor controls orientated to allow easy adjustment during installation
The driver converts mains AC voltage input to DC voltage output to the LED array.
• Saves time during install.
• Integrated LED driver prewired to a 4 pole Flow™ connector to aid installation and future maintenance.
• Allows simple maintenance/ servicing of the luminaire.
• Quick & convenient wiring
• Multiple base mounting options allow for flexibility of install.
• 4 side entry points & 1 rear entry point.
• Includes moisture seal to achieve IP65 rating.
• Provision for over 3 hours reduced light output in the event of mains power failure.
• Also allows for consistency throughout installation i.e. the emergency luminaire looks the same as that of the mains only luminaires.
Removable to enable the fitting to be semi-recess mounted or for installing within the metal enclosure.
Microwave sensor
Driver Flow™ connectors
Base
Battery - 3 hour emergency operation
Surface mount adaptor ring
OVIA® LIGHTING
A28
INC
EPTO
R®
A28
INC
EPTO
R®
Product Approvals
LED
Dimensions
Colour Temperatures
2014/35/EU EN 60598-1:2015 EN 61347-1:2008+A2:2013 EN 61347-2-13:2014 EN 60598-2-1: 1989 EN 60068-2-75: 2014 BS EN 60598-2-22: 2014 BS EN 61347-2-7: 2012 BS EN 60335-2-29:2004+A2:2010 BS EN 62133: 2013 EN 55015:2013+A1:2015EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61547:2009 R&TTE
IP65
Available Finishes
10W LED Utility Bulkhead
Code Description
LED9500WH9 10W LED Utility Bulkhead - Standard - White
LED9500WH93EM 12W LED Utility Bulkhead - Emergency - White
LED9500WH9MS 12W LED Utility Bulkhead - Microwave Sensor - White
LED9500WH9MS3EM 17W LED Utility Bulkhead - Microwave Sensor & Emergency - White
CW
WH
Inceptor® Evo
Emergency Pack available, please see page A34
Featuring Flow™ technology
A29
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
LED
Dimensions
Available Finishes
Colour Temperatures
IP65
CW
WH
10W LED Utility Eyelid Bulkhead
Code Description
LED9505WH9 10W LED Utility Eyelid Bulkhead - Standard - White
LED9505WH93EM 12W LED Utility Eyelid Bulkhead - Emergency - White
LED9505WH9MS 12W LED Utility Eyelid Bulkhead - Microwave Sensor - White
LED9505WH9MS3EM 17W LED Utility Eyelid Bulkhead - Microwave Sensor & Emergency - White
Inceptor® Evo
Emergency Pack available, please see page A34
Product Approvals
2014/35/EU EN 60598-1:2015 EN 61347-1:2008+A2:2013 EN 61347-2-13:2014 EN 60598-2-1: 1989 EN 60068-2-75: 2014 BS EN 60598-2-22: 2014 BS EN 61347-2-7: 2012 BS EN 60335-2-29:2004+A2:2010 BS EN 62133: 2013 EN 55015:2013+A1:2015EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61547:2009 R&TTE
Featuring Flow™ technology
OVIA® LIGHTING
A30
INC
EPTO
R®
A30
INC
EPTO
R®
Inceptor® Evo
The robust polycarbonate construction (IK08) can be enhanced further by encasing the body in an additional metal enclosure, providing excellent vandal resistant protection (IK10).
Metal enclosures
An integrated 4 pole Flow™ connector allows for quick and simple connection & disconnection for initial and periodic testing to be carried out.
The Flow™ connector offers loop-in and out facility with large terminals accepting up to 3 x 2.5mm2.
Fast-fit integrated Flow™ connector
With an A+ energy rating and an L70 LED lifetime of 50,000 hours, the fitting affords excellent opportunities for cost savings compared to traditional lamp types.
Energy efficient
3 YEARWARRANTY
4200K120° BEAM ANGLE
COOL WHITE
closure,
A31
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Metal Housing for LED Utility Bulkhead
Code Description
LED9001BK Metal Housing for LED Utility Bulkhead - Circular - Black
LED9002BK Metal Housing for LED Utility Bulkhead - Eyelid - Black
LED9003BK Metal Housing for LED Utility Bulkhead - Grille - Black
Inceptor® Evo Metal Housing
Dimensions
Available Finishes
BK
IK10
OVIA® LIGHTING
A32
INC
EPTO
R®
A32
INC
EPTO
R®
Inceptor® Evo Technical Information
TECHNICAL INFORMATION
Input parameters Standard version Emergency version
Input voltage 230V 230V
Input current 0.063A 0.090A
Input wattage Total power: 10W Total power: 12W
Input frequency 50Hz~60Hz 50Hz~60Hz
Output parameters
No. of LED’s 150 PCS 170 PCS
Colour temperature 4200K 4200K
CRI 68.4 68.4
121lm/W 100.8lm/W
LED power 9W 9W
Lumen output (mains)
Without diffuser (lm): 1790lm
With diffuser (lm): 1210lm
2m Without diffuser (lux): 81lux
2m With diffuser (lux): 56lux
Without diffuser (lm): 1790lm
With diffuser (lm): 1210lm
2m Without diffuser (lux): 81lux
2m With diffuser (lux): 56lux
Lumen output (emergency) N/A
Without diffuser (lm): 494lm
With diffuser (lm): 349lm
2m Without diffuser (lux): 38lux
2m With diffuser (lux): 27lux
Light beam angle 120° 120°
Area of diffuser 490m² 490m²
Warranty 3 Years 3 Years
Operating temperature -5 - +45°C -5 - +45°C
Weight 1.43 kg 1.48 kg
Fixture parameters
Fixture class II II
Mode of mounting Ceiling mount, Wall mount Ceiling mount, Wall mount
IP rating IP65 IP65
UV stabilised Yes Yes
A33
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
INC
EPTO
R®
Inceptor® Evo Technical Information
TECHNICAL INFORMATION
Input parameters Microwave sensor version Emergency & microwave sensor version
Input voltage 230V 230V
Input current 0.095A 0.133A
Input wattage Total power: 12W Total power: 17W
Input frequency 50Hz~60Hz 50Hz~60Hz
Output parameters
No. of LED’s 150 PCS 170 PCS
Colour temperature 4200K 4200K
CRI 68.4 68.4
100.8lm/W 80.6lm/W
LED power 9W 9W
Lumen output (mains)
Without diffuser (lm): 1790lm
With diffuser (lm): 1210lm
2m Without diffuser (lux): 81lux
2m With diffuser (lux): 56lux
Without diffuser (lm): 2080lm
With diffuser (lm): 1370lm
2m Without diffuser (lux): 96lux
2m With diffuser (lux): 75lux
Lumen output (emergency) N/A
Without diffuser (lm): 494lm
With diffuser (lm): 349lm
2m Without diffuser (lux): 38lux
2m With diffuser (lux): 27lux
Light beam angle 120° 120°
Area of diffuser 490m² 490m²
Warranty 3 Years 3 Years
Operating temperature -5 - +45°C -5 - +45°C
Weight 1.78 kg 1.83 kg
Fixture parameters
Fixture class II II
Mode of mounting Ceiling mount, Wall mount Ceiling mount, Wall mount
IP rating IP65 IP65
UV stabilised Yes Yes
OVIA® LIGHTING
A34
INC
EPTO
R®
A34
INC
EPTO
R®
Integrated
Connector
Inceptor® Accessories
Emergency Pack
Code Description
EMCGLED2305M3Mains Universal Remote 9 Cell 3 Hour Emergency Pack 2.2A For Use With LED Downlights
Insulation Support BracketCode Description
ISC1020 Insulation Support Bracket - suitable for use with Nano5 & Pico FG
Dimensions
Dimensions
Product Approvals
EN 61000-3-2: 2014, EN 61547: 2009 IEC 61347-2-7: 2011, EN 55015: 2013 + A1: 2015
60mm
27m
m
515mm
42m
m
38m
m
270mm
68m
m
180º
30m
m
Tested Compatible Downlights:Inceptor® Omni, Inceptor® Nano5, Inceptor® Pico, Inceptor® Pico FG
INDOOR LIGHTING
Ovia® Lighting includes exciting lighting products ranging from traditional under cupboard lights and downlights for domestic use through LED emergency exit signs and metal halide display lighting for commercial applications and market leading fire and acoustic rated light fittings.
12 Month No Quibble Guarantee
All Ovia® Lighting Products are covered by our straight forward ‘No Quibble Guarantee’ against any fault in materials or manufacture experienced at any time within 12 months of the date of supply.
The Ovia® Lighting Range...
ContentsB38 Indoor Lighting
C62 Downlights
D74 Pendant and Suspended
E82 Emergency Signs
F96 Outdoor Lighting
G124 Outdoor Bollards
OVIA® LIGHTING
B38B38
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Available Finishes
Colour Temperatures
Product Approvals
CW
WH AL
LED Surface Lights
Complies with BS EN 60598
LED’s are integrated and non-replaceable
230V 4.5W Integrated LED Wall Light
Code Description Max Wattage
LED310WHAL 230V 4.5W Integrated LED Wall Light - Cool White LED - Aluminium 4.5W
LED310WHWH 230V 4.5W Integrated LED Wall Light - Cool White LED - White 4.5W
Please add required finish in to the code e.g. LED310WHAL.
B39
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
WH BK
WW
Complies with BS EN 60598
LED’s are integrated and non-replaceable
LED Surface Lights
230V 3W Integrated LED Chamfered Wall Light
Code Description Max Wattage
LED315WHBK 230V 3W Integrated LED Chamfered Wall Light - Warm White LED - Black
3W
LED315WHWH 230V 3W Integrated LED Chamfered Wall Light - Warm White LED - White
3W
LED
Please add required finish in to the code e.g. LED315WHBK.
OVIA® LIGHTING
B40B40
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Available Finishes
Colour Temperatures
Product Approvals
CW BL
AL
Complies with BS EN 60598
LED’s are integrated and non-replaceable
LED Surface Lights
230V 1W LED Integrated Mini Up or Down Wall Light
Code Description Max Wattage
LED311ALBL 230V 1W Integrated LED Up or Down Wall Light - Blue LED - Aluminium
1W
LED311ALWH 230V 1W Integrated LED Up or Down Wall Light - Cool White LED - Aluminium
1W
B41
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
LED’s are integrated and non-replaceable
LED Surface Lights
230V 2 x 1W Integrated LED Mini Up & Down Wall Light
Code Description Max Wattage
LED312ALBL 230V 2 x 1W Integrated LED Up & Down Wall Light - Blue LED - Aluminium
2 X 1W
LED312ALWH 230V 2 x 1W Integrated LED Up & Down Wall Light - Cool White LED - Aluminium
2 X 1W
Complies with BS EN 60598
CW BL
AL
LED
OVIA® LIGHTING
B42B42
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Available Finishes
Colour Temperatures
Product Approvals
LED’s are integrated and non-replaceable
230V 3W Integrated LED Cube Wall Light
Code Description Max Wattage
LED313WHBK 230V 3W Integrated LED Cube Wall Light - Warm White LED - Black 3W
LED313WHWH 230V 3W Integrated LED Cube Wall Light - Warm White LED - White 3W
Complies with BS EN 60598
WH BK
WW
LED Surface Lights
Please add required finish in to the code e.g. LED313WHBK.
B43
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
LED’s are integrated and non-replaceable
230V 3W Integrated LED Cube Down Light
Code Description Max Wattage
LED314WHBK 230V 3W Integrated LED Cube Down Light - Warm White LED - Black 3W
LED314WHWH 230V 3W Integrated LED Cube Down Light - Warm White LED - White 3W
Complies with BS EN 60598
LED Surface Lights
WH BK
LED
WW
Please add required finish in to the code e.g. LED314WHBK.
OVIA® LIGHTING
B44B44
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Available Finishes
Colour Temperatures
Product Approvals
CW BL
BS
LED’s are integrated and non-replaceable
230V 1.5W Integrated LED 126mm Square Wall Light
Code Description Max Wattage
LED325BLBS 230V 1.5W Integrated LED 126mm Square Wall Light - Blue LED - Brushed Stainless
1.5W
LED325WHBS 230V 1.5W Integrated LED 126mm Square Wall Light - Cool White LED - Brushed Stainless
1.5W
LED Surface Lights
Complies with BS EN 60598
B45
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
LED’s are integrated and non-replaceable
230V 1.5W Integrated LED 126mm Round Wall Light
Code Description Max Wattage
LED326BLBS 230V 1.5W Integrated LED 126mm Round Wall Light - Blue LED - Brushed Stainless
1.5W
LED326WHBS 230V 1.5W Integrated LED 126mm Round Wall Light - Cool White LED - Brushed Stainless
1.5W
CW BL
BS
LED Surface Lights
Complies with BS EN 60598
LED
OVIA® LIGHTING
B46B46
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Available Finishes
Colour Temperatures
Product Approvals
LED’s are integrated and non-replaceable
230V 2 x 1W Integrated LED Slim Up & Down Light
Code Description Max Wattage
LED316WHBK 230V 2 x 1W Integrated LED Slim Up & Down Light - Warm White LED - Black
2 x 1W
LED316WHWH 230V 2 x 1W Integrated LED Slim Up & Down Light - Warm White LED - White
2 x 1W
Complies with BS EN 60598
WH BK
WW
LED Surface Lights
Please add required finish in to the code e.g. LED316WHBK.
B47
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
LED’s are integrated and non-replaceable
230V IP44 Integrated LED Up & Down Light
Code Description Max Wattage
LED501BLCH 230V 2 x 1W IP44 Integrated LED Up & Down Light - Blue LED - Chrome
2 x 1W
LED501WHCH 230V 2 x 1W IP44 Integrated LED Up & Down Light - Cool White LED - Chrome
2 x 1W
LED Wall Lights
CW BL
CH
Complies with BS EN 60598
IP44LED
OVIA® LIGHTING
B48B48
IND
OO
R L
IGH
TIN
G
Dimensions
Available Finishes
Product Approvals
Lamp not included
230V Low Energy IP54 Single Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE601AL 230V GX53 9W Max. IP54 Single Angled Wall Light - Aluminium
1 GX53 9W
AL
Good protection against ingress of dust and moistureComplies with BS EN 60598
Wall Lights
IP54
B49
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Lamp not included
230V Low Energy IP54 Twin Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE602AL 230V GX53 2 x 9W Max. IP54 Twin Angled Wall Light - Aluminium
2 GX53 2 x 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
AL
IP54
Wall Lights
OVIA® LIGHTING
B50B50
IND
OO
R L
IGH
TIN
G
Dimensions
Available Finishes
Product Approvals
Lamp not included
230V Low Energy IP44 Single Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE611CH 230V E14 12W Max. Low Energy IP44 Single Wall Light - Chrome
1 E14 12W
CH
Complies with BS EN 60598
Wall Lights
IP44
B51
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Lamp not included
230V Low Energy IP44 Twin Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE612CH 230V E14 2 x 12W Max. Low Energy IP44 Twin Wall Light - Chrome
2 E14 2 x 12W
Complies with BS EN 60598
CH
Wall Lights
IP44
OVIA® LIGHTING
B52B52
IND
OO
R L
IGH
TIN
G
Dimensions
Available Finishes
Product Approvals
SV
Lamp not included
230V G24q 32W Max. Wall Light With Glass Cover
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
CF240SV 230V G24q 32W Max. Wall Light With Glass Cover - Silver
1 G24q 32W
Complies with BS EN 60598
Klarheit Fittings
B53
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
SV
Lamp not included
230V T5 1 x 24W Max. Wall Light With Glass Cover
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE510SV 230V T5 1 x 24W Max. Wall Light With Glass Cover - Silver
1 T5 (549mm) 24W
Complies with BS EN 60598
Klarheit Fittings
OVIA® LIGHTING
B54B54
IND
OO
R L
IGH
TIN
G
Dimensions
Available Finishes
Product Approvals
Lamp not included
230V T5 2 x 24W Max. Adjustable Wall Light With Glass Cover
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE520SV 230V T5 2 x 24W Max. Adjustable Wall Light With Glass Cover - Silver
2 T5 (549mm) 2 x 24W
SV
Complies with BS EN 60598
Klarheit Fittings
B55
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
Product Approvals
Dimensions
Available Finishes
Please add required finish in to the code e.g. LED105CH.
230V Low Energy Undercupboard Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE105CH 230V GX53 13W Max. Undercupboard Light - Chrome
1 GX53 13W
LE105SC 230V GX53 13W Max. Undercupboard Light - Satin Chrome
1 GX53 13W
SC CH
Double insulated, no earth connection required.Complies with BS EN 60598
Undercupboard Lights
OVIA® LIGHTING
B56B56
IND
OO
R L
IGH
TIN
GLED Strip Lighting
230V 2.7W Integrated LED 240mm Strip Light - c/w Mains Supply Lead
Code Description Max Wattage
LED301WHWH 230V 2.7W Integrated LED 240mm Strip Light - Cool White LED - White 2.7W
230V 3.6W Integrated LED 320mm Strip Light - c/w Mains Supply Lead
Code Description Max Wattage
LED302WHWH 230V 3.6W Integrated LED 320mm Strip Light - Cool White LED - White 3.6W
All our LED strip lights can be connected end to end LED’s are integrated and non-replaceable
All our LED strip lights can be connected end to end LED’s are integrated and non-replaceable
Dimensions
Dimensions
CW WH
LEDColour Temperatures Available Finishes
B57
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
LED Strip Lighting
230V 1M Main Supply Lead
Code Description Length
LED305WH 230V 1m Main Supply Lead 1M
230V LED Strip Light Accessories
Code Description Length
LED307WH 230V 0.25m Link Lead 0.25M
LED308WH 230V 0.5m Link Lead 0.5M
230V 6.8W Integrated LED 540mm Strip Light - c/w Mains Supply Lead
Code Description Max Wattage
LED303WHWH 230V 6.8W Integrated LED 540mm Strip Light - Cool White LED - White 6.8W
All our LED strip lights can be connected end to end LED’s are integrated and non-replaceable
Dimensions
Complies with BS EN 60598
Product Approvals
OVIA® LIGHTING
B58B58
IND
OO
R L
IGH
TIN
G
LED
Dimensions
Product Approvals
This module is compatible with 311 & 312 New Media™ Plates
Please see the following pages and the dedicated Click® Wiring Accessories catalogue for more information on New Media™ plates and back boxes.
Colour Temperatures
WW CW BL
Complies with BS EN 60598
Modular LED Stair Light
230V 1W Integrated LED (50mm x 50mm) Modular Stair Light
Code Description Max Wattage
MM1000BL 230V 1W Integrated LED Euro Module - Blue LED 1W
MM1000CW 230V 1W Integrated LED Euro Module - Cool White LED 1W
MM1000WW 230V 1W Integrated LED Euro Module - Warm White LED 1W
B59
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
IND
OO
R L
IGH
TIN
G
New Media™ Plates
New Media™ Unfurnished Plates
Code Description
DP*311 Deco® Plus 1 Gang Plate Twin Aperture (Unfurnished)
DP*312 Deco® Plus 2 Gang Plate Quad Aperture (Unfurnished)
VP*311 Deco® 1 Gang Plate Twin Aperture (Unfurnished)
VP*312 Deco® 2 Gang Plate Quad Aperture (Unfurnished)
FP*311 Define® 1 Gang Plate Twin Aperture (Unfurnished)
FP*312 Define® 2 Gang Plate Quad Aperture (Unfurnished)
SIN311BK Definity™1 Gang Insert Twin Aperture (Unfurnished)
SCP311* Definity™ 1 Gang Cover Twin Aperture (Unfurnished)
SIN312BK Definity™ 2 Gang Insert Quad Aperture (Unfurnished)
SCP312* Definity™ 2 Gang Cover Quad Aperture (Unfurnished)
CMA311 Mode® 1 Gang Plate Twin Aperture (Unfurnished)
CMA312 Mode® 2 Gang Plate Quad Aperture (Unfurnished)
PRW311 Polar™ 1 Gang Plate Twin Aperture (Unfurnished)
PRW312 Polar™ 2 Gang Plate Quad Aperture (Unfurnished)
CMA311AG Part M™ 1 Gang Plate Twin Aperture (Unfurnished)
CMA312AG Part M™ 2 Gang Plate Quad Aperture (Unfurnished)
DPAB311
CMA311 PRW311 CMA311AG
VPBR311 FPBN311 SCP311 SIN311BK
Products codes are explained overleaf
OVIA® LIGHTING
B60B60
IND
OO
R L
IGH
TIN
GNew Media™ Plate Product Codes
Plate Style
Plate Style
Plate Style
Product Finish
Product Finish
Product Finish
Product Number
Product Number
Product Number
Insert Colour
Insert Colour
Insert Colour
VP BN 311 BK
Deco® unique product codes
Deco® plates are manufactured from stainless steel, available in the following finishes:
Antique Brass* (AB), Polished Brass (BR), Satin Brass* (SB), Polished Chrome (CH), Satin Chrome* (SC), Black Nickel (BN), Pearl Nickel (PN) and Stainless Steel (SS).
Georgian Style (GCBR) plates are manufactured from cast brass. PLEASE NOTE: Antique Brass and Black Nickel are only available with black inserts.
Deco® Plus unique product codes
Deco® Plus plates are manufactured from stainless steel, available in the following finishes:
Antique Brass* (AB), Polished Brass (BR), Satin Brass* (SB), Polished Chrome (CH), Satin Chrome* (SC), Black Nickel (BN), and Stainless Steel (SS).
PLEASE NOTE: Antique Brass and Black Nickel are only available with black inserts.
Define® unique product codes
Every Define® product featured is available in 5 distinctive quality finishes:
Polished Chrome (CH), Stainless Steel (SS), Brushed Stainless* (BS), Pearl Nickel (PN) and Black Nickel (BN).
DP BN 311 BK
FP BN 312 BK
TM
TM Cover
Product Number
Product Number
Insert Colour
Product Finish
‘INGOT’ Switch Finish (if applicable)
SIN
SCP
311
311
BK
SS
SS
Definity™ unique product codes
Definity™ plates are coated stainless steel, available in the following finishes:
Brushed Stainless* (BS), Polished Chrome (CH) and Stainless Steel (SS), Red (RD), Matt Black (BK).White (PW) is also available, produced from polycarbonate.
Understanding the code
Understanding the code
Understanding the code
Understanding the code
*UK Design Registration 3015621
*UK Design Registration 3015621
*UK Design Registration 3015621
*UK Design Registration 3015621
DOWNLIGHTS
OVIA® LIGHTING
C62C62
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Available Finishes
WH SC CH
Please add required finish in to the code e.g. GZ015CH.
NOTE: Features a housed terminal block with loop-out facility.
Lamp not included Features a housed terminal block with loop-out facility
Complies with BS EN 60598
230V GZ10 50W Max. Fixed Downlight
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GZ015CH 230V GZ10 50W Max. Fixed Downlight - Chrome
1 GZ10/GU10 50W
GZ015SC 230V GZ10 50W Max. Fixed Downlight - Satin Chrome
1 GZ10/GU10 50W
GZ015WH 230V GZ10 50W Max. Fixed Downlight - White
1 GZ10/GU10 50W
Fixed Downlights
C63
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Available Finishes
WH SC CH
Please add required finish in to the code e.g. GZ020CH.
230V GZ10 50W Max. Adjustable Downlight
Code Description TiltNo. of Lamps
Lampholder Type
Max Wattage
GZ020CH 230V GZ10 50W Max. Adjustable Downlight - Chrome
30° 1 GZ10/GU10 50W
GZ020SC 230V GZ10 50W Max. Adjustable Downlight - Satin Chrome
30° 1 GZ10/GU10 50W
GZ020WH 230V GZ10 50W Max. Adjustable Downlight - White
30° 1 GZ10/GU10 50W
Complies with BS EN 60598
Adjustable Downlights
NOTE: Features a housed terminal block with loop-out facility.
OVIA® LIGHTING
C64C64
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Lamp not included Requires Bezel (GF495) not included
230V IP65 Fixed Downlight Housing c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GZ096 230V GZ10 50W Max. IP65 Fixed Downlight Housing
1 GZ10/GU10 50W
IP65
Complies with BS EN 60598
Downlight Housing
Requires Bezel (GF495) not included(See opposite page)
Integrated
Connector
C65
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OVI
A® D
OW
NLI
GH
TS
Requires GU395 or GZ096 Housing
Cast IP65 Bezel
Code Description
GF495CH Cast IP65 Bezel - Chrome
GF495SC Cast IP65 Bezel - Satin Chrome
GF495WH Cast IP65 Bezel - White
Cast Downlight Bezels
WH SC CH
Available Finishes
IP65
OVIA® LIGHTING
C66C66
OVI
A® D
OW
NLI
GH
TSRecessed Downlights
GF140CG GF145CG GF147CG
WH
Available Finishes Complies with BS EN 60598
Product Approvals
230V Low Energy Open Downlight With Optional Glass c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE120WH 230V E27 20W Max. 175mm Dia. Vertical Head Downlight - White
1 E27 20W
Glass Kits for LE120
Code Description
GF140CG IP65 Glass And Seal
GF145CG Drop Full Glass Kit (c/w Collars)
GF147CG Drop Halo Glass Kit (c/w Collars)
Lamp not included Optional glass covers available not included
Dimensions
Optional glass covers available not included
Open Downlight With Optional Gla
GF140CG GF145CGG GF147CGGF1
Integrated
Connector
C67
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OVI
A® D
OW
NLI
GH
TS
Recessed Downlights
GF240CG GF245CG GF247CG
WH
Available Finishes Complies with BS EN 60598
Product Approvals
230V Low Energy Open Downlight With Optional Glass c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE220WH 230V E27 2 x 20W Max. 230mm Dia. Horizontal Head Downlight - White
1 E27 2 x 20W
Glass Kits for LE220
Code Description
GF240CG IP65 Glass And Seal
GF245CG Drop Full Glass Kit (c/w Collars)
GF247CG Drop Halo Glass Kit (c/w Collars)
Lamp not included Optional glass covers available not included
Dimensions
Optional glass covers available not included
GF240CG GFF245CGGF GF247CGGF
Integrated
Connector
OVIA® LIGHTING
C68C68
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Available Finishes
WH SC CH
Please add required finish in to the code e.g. LE5211CH.
Lamp not included
230V Cast Fixed Square 122mm Downlights c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE5211CH 230V E27 12W Max. Fixed Downlight - Chrome
1 E27 12W
LE5211SC 230V E27 12W Max. Fixed Downlight - Satin Chrome
1 E27 12W
LE5211WH 230V E27 12W Max. Fixed Downlight - White
1 E27 12W
Complies with BS EN 60598
Cast Fixed Downlights
Integrated
Connector
C69
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Available Finishes
WH SC CH
Please add required finish in to the code e.g. LE5201CH.
Lamp not included
230V Cast Fixed 118mm Dia. Downlights c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE5201CH 230V E27 12W Max. Fixed Downlight - Chrome
1 E27 12W
LE5201SC 230V E27 12W Max. Fixed Downlight - Satin Chrome
1 E27 12W
LE5201WH 230V E27 12W Max. Fixed Downlight - White
1 E27 12W
Complies with BS EN 60598
Cast Fixed Downlights
Integrated
Connector
OVIA® LIGHTING
C70C70
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Available Finishes
WH SC CH
Please add required finish in to the code e.g. LE5101CH.
Lamp not included
230V Fixed 110mm Dia. Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE5101CH 230V E27 12W Max. Fixed Downlight - Chrome
1 E27 12W
LE5101SC 230V E27 12W Max. Fixed Downlight - Satin Chrome
1 E27 12W
LE5101WH 230V E27 12W Max. Fixed Downlight - White
1 E27 12W
Complies with BS EN 60598
Fixed Downlights
Integrated
Connector
C71
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OVI
A® D
OW
NLI
GH
TS
Product Approvals
Dimensions
Lamp not included Requires Bezel (GF4300, GF4310, GF4311) not included, please see overleaf.
230V Fixed Downlight Housing c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE5301 230V E27 12W Max. Fixed Downlight Housing
1 E27 12W
Complies with BS EN 60598
Downlight Housing
Integrated
Connector
OVIA® LIGHTING
C72C72
OVI
A® D
OW
NLI
GH
TSCast Downlight Bezels
WH SC CH
Available Finishes Complies with BS EN 60598
Product Approvals
Cast IP65 118mm Diameter Bezel
Code Description
GF4300CH Cast IP65 118mm Diameter Bezel - Chrome
GF4300SC Cast IP65 118mm Diameter Bezel - Satin Chrome
GF4300WH Cast IP65 118mm Diameter Bezel - White
Cast IP65 122mm Square Bezel
Code Description
GF4301CH Cast IP65 122mm Square Bezel - Chrome
GF4301SC Cast IP65 122mm Square Bezel - Satin Chrome
GF4301WH Cast IP65 122mm Square Bezel - White
Cast 118mm Diameter Halo Glass Bezel
Code Description
GF4311CH Cast 118mm Diameter Halo Glass Bezel - Chrome
GF4311SC Cast 118mm Diameter Halo Glass Bezel - Satin Chrome
GF4311WH Cast 118mm Diameter Halo Glass Bezel - White
Requires GU4301 or LE5301 Housing
Requires GU4301 or LE5301 Housing
Requires GU4301 or LE5301 Housing
PENDANT &
SUSPENDED
LIGHTING
OVIA® LIGHTING
D74D74
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
AL
Lamp not included
230V E27 60W Max. 130mm Dia. Long Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS005AL 230V E27 60W Max. 130mm Dia. Long Aluminium Pendant
1 E27 60W
Complies with BS EN 60598
Suspended Pendant Fittings
D75
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
Lamp not included
230V E27 60W Max. 150mm Dia. Long Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS010AL 230V E27 60W Max. 150mm Dia. Long Aluminium Pendant
1 E27 60W
AL
Complies with BS EN 60598
Suspended Pendant Fittings
OVIA® LIGHTING
D76D76
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
AL
Lamp not included
230V E27 60W Max. 210mm Dia. Dome Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS015AL 230V E27 60W Max. 210mm Dia. Dome Aluminium Pendant
1 E27 60W
Complies with BS EN 60598
Suspended Pendant Fittings
D77
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
AL
Lamp not included
230V E27 60W Max. 350mm Dia. Dome Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS020AL 230V E27 60W Max. 350mm Dia. Dome Aluminium Pendant
1 E27 60W
Complies with BS EN 60598
Suspended Pendant Fittings
OVIA® LIGHTING
D78D78
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
AL
Lamp not included
230V E27 60W Max. 315mm Dia. Contour Clear Glass Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS025AL 230V E27 60W Max. 315mm Dia. Contour Clear Glass Aluminium Pendant
1 E27 60W
Complies with BS EN 60598
Suspended Pendant Fittings
D79
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
PEN
DAN
T LI
GH
TIN
G
Product Approvals
Dimensions
Available Finishes
AL
Lamp not included
230V E27 60W Max. 330mm Dia. Dome With Opaque Glass Aluminium Pendant
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
PS030AL 230V E27 60W Max. 330mm Dia. Dome With Opaque Glass Aluminium Pendant
1 E27 60W
Complies with BS EN 60598
Suspended Pendant Fittings
OVIA® LIGHTING
Notes
D80D80
PEN
DAN
T LI
GH
TIN
G
EMERGENCY SIGNS
OVIA® LIGHTING
E82E82
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
Product Approvals
SV
Small (25m) Wall Mounted Emergency Sign - Single Sided Legend
EM251SVSD 230V 7W LED Wall Mounted Emergency Sign - Down
EM251SVSL 230V 7W LED Wall Mounted Emergency Sign - Left
EM251SVSR 230V 7W LED Wall Mounted Emergency Sign - Right
EM251SVSU 230V 7W LED Wall Mounted Emergency Sign - Up
Complies with BS EN 60598
Small Surface Mounted Signs
(25M) 3hr maintained only. Self test with LED identification.
E83
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
Dimensions
Available Finishes
Product Approvals
Large (32m) Wall Mounted Emergency Sign - Single Sided Legend
EM321SVSD 230V 7W LED Wall Mounted Emergency Sign - Down
EM321SVSL 230V 7W LED Wall Mounted Emergency Sign - Left
EM321SVSR 230V 7W LED Wall Mounted Emergency Sign - Right
EM321SVSU 230V 7W LED Wall Mounted Emergency Sign - Up
Complies with BS EN 60598
SV
Large Surface Mounted Signs
LED(32M) 3hr - can be wired as maintained or non-maintained. Self test with LED identification.
OVIA® LIGHTING
E84E84
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
SV
Product Approvals
Small (25m) Outrigger Mounted Emergency Sign - Single Sided Legend
EM252SVSD 230V 7W LED Outrigger Mounted Emergency Sign - Down
EM252SVSL 230V 7W LED Outrigger Mounted Emergency Sign - Left
EM252SVSR 230V 7W LED Outrigger Mounted Emergency Sign - Right
EM252SVSU 230V 7W LED Outrigger Mounted Emergency Sign - Up
Small (25m) Outrigger Mounted Emergency Sign - Double Sided LegendEM252SVDD 230V 7W LED Outrigger Mounted Emergency Sign - Down
EM252SVDLR 230V 7W LED Outrigger Mounted Emergency Sign - Left/Right
EM252SVDU 230V 7W LED Outrigger Mounted Emergency Sign - Up
Complies with BS EN 60598
Small Surface Mounted Signs
(25M) 3hr maintained only. Self test with LED identification.
E85
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
Dimensions
Available Finishes
SV
LED
Large (32m) Outrigger Mounted Emergency Sign - Single Sided Legend
EM322SVSD 230V 7W LED Outrigger Mounted Emergency Sign - Down
EM322SVSL 230V 7W LED Outrigger Mounted Emergency Sign - Left
EM322SVSR 230V 7W LED Outrigger Mounted Emergency Sign - Right
EM322SVSU 230V 7W LED Outrigger Mounted Emergency Sign - Up
Large (32m) Outrigger Mounted Emergency Sign - Double Sided LegendEM322SVDD 230V 7W LED Outrigger Mounted Emergency Sign - Down
EM322SVDLR 230V 7W LED Outrigger Mounted Emergency Sign - Left/Right
EM322SVDU 230V 7W LED Outrigger Mounted Emergency Sign - Up
Large Surface Mounted Signs
Complies with BS EN 60598
Product Approvals
(32M) 3hr - can be wired as maintained or non-maintained. Self test with LED identification.
OVIA® LIGHTING
E86E86
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
Small (25m) Ceiling Mounted Emergency Sign - Single Sided Legend
EM253SVSD 230V 7W LED Ceiling Mounted Emergency Sign - Down
EM253SVSL 230V 7W LED Ceiling Mounted Emergency Sign - Left
EM253SVSR 230V 7W LED Ceiling Mounted Emergency Sign - Right
EM253SVSU 230V 7W LED Ceiling Mounted Emergency Sign - Up
Small (25m) Ceiling Mounted Emergency Sign - Double Sided LegendEM253SVDD 230V 7W LED Ceiling Mounted Emergency Sign - Down
EM253SVDLR 230V 7W LED Ceiling Mounted Emergency Sign - Left/Right
EM253SVDU 230V 7W LED Ceiling Mounted Emergency Sign - Up
SV
Complies with BS EN 60598
Product Approvals
Small Surface Mounted Signs
(25M) 3hr maintained only. Self test with LED identification.
E87
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
Dimensions
Available Finishes
Large (32m) Wall Mounted Box Type Emergency Sign - Single Sided Legend
EM332WHSD 230V 7W LED Wall Mounted Emergency Sign - Down
EM332WHSL 230V 7W LED Wall Mounted Emergency Sign - Left
EM332WHSR 230V 7W LED Wall Mounted Emergency Sign - Right
EM332WHSU 230V 7W LED Wall Mounted Emergency Sign - Up
WH
Large Surface Mounted Signs
Complies with BS EN 60598
Product Approvals
LED(32M) 3hr - can be wired as maintained or non-maintained. Self test with LED identification.
OVIA® LIGHTING
E88E88
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
(25M) 3hr maintained only. Self test with LED
(Maybe shortened if required)
Small (25m) Chain Mounted Emergency Sign - Single Sided Legend
EM254SVSD 230V 7W LED Chain Mounted Emergency Sign - Down
EM254SVSL 230V 7W LED Chain Mounted Emergency Sign - Left
EM254SVSR 230V 7W LED Chain Mounted Emergency Sign - Right
EM254SVSU 230V 7W LED Chain Mounted Emergency Sign - Up
Small (25m) Chain Mounted Emergency Sign - Double Sided LegendEM254SVDD 230V 7W LED Chain Mounted Emergency Sign - Down
EM254SVDLR 230V 7W LED Chain Mounted Emergency Sign - Left/Right
EM254SVDU 230V 7W LED Chain Mounted Emergency Sign - Up
SV
Complies with BS EN 60598
Product Approvals
Small Surface Mounted Signs
E89
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
Dimensions
Available Finishes
Large (32m) Chain Mounted Emergency Sign - Single Sided Legend
EM324SVSD 230V 7W LED Chain Mounted Emergency Sign - Down
EM324SVSL 230V 7W LED Chain Mounted Emergency Sign - Left
EM324SVSR 230V 7W LED Chain Mounted Emergency Sign - Right
EM324SVSU 230V 7W LED Chain Mounted Emergency Sign - Up
Large (32m) Chain Mounted Emergency Sign - Double Sided Legend
EM324SVDLR 230V 7W LED Chain Mounted Emergency Sign - Left/Right
EM324SVDU 230V 7W LED Chain Mounted Emergency Sign - Up
(32M) 3hr - can be wired as maintained or non-maintained. Self test with LED
SV
Complies with BS EN 60598
Product Approvals
LED
Large Surface Mounted Signs
OVIA® LIGHTING
E90E90
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
Small (25m) Pendulum Mounted Emergency Sign - Single Sided Legend
EM255SVSD 230V 7W LED Pendulum Mounted Emergency Sign - Down
EM255SVSL 230V 7W LED Pendulum Mounted Emergency Sign - Left
EM255SVSR 230V 7W LED Pendulum Mounted Emergency Sign - Right
EM255SVSU 230V 7W LED Pendulum Mounted Emergency Sign - Up
Small (25m) Pendulum Mounted Emergency Sign - Double Sided LegendEM255SVDD 230V 7W LED Pendulum Mounted Emergency Sign - Down
EM255SVDLR 230V 7W LED Pendulum Mounted Emergency Sign - Left/Right
EM255SVDU 230V 7W LED Pendulum Mounted Emergency Sign - Up
(25M) 3hr maintained only. Self test with LED
SV
Product Approvals
Complies with BS EN 60598
Small Surface Mounted Signs
E91
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
Dimensions
Available Finishes
Large (32m) Pendulum Mounted Emergency Sign - Single Sided Legend
EM325SVSD 230V 7W LED Pendulum Mounted Emergency Sign - Down
EM325SVSL 230V 7W LED Pendulum Mounted Emergency Sign - Left
EM325SVSR 230V 7W LED Pendulum Mounted Emergency Sign - Right
EM325SVSU 230V 7W LED Pendulum Mounted Emergency Sign - Up
Large (32m) Pendulum Mounted Emergency Sign - Double Sided Legend
EM325SVDLR 230V 7W LED Pendulum Mounted Emergency Sign - Left/Right
EM325SVDU 230V 7W LED Pendulum Mounted Emergency Sign - Up
(32M) 3hr - can be wired as maintained or non-maintained. Self test with LED
SV
Product Approvals
Complies with BS EN 60598
LED
Large Surface Mounted Signs
OVIA® LIGHTING
E92E92
EMER
GEN
CY
SIG
NS
LED
Dimensions
Available Finishes
Small (25m) Recessed Mounted Emergency Sign - Single Sided Legend
EM256WHSD 230V 7W LED Recessed Emergency Sign - Down
EM256WHSL 230V 7W LED Recessed Emergency Sign - Left
EM256WHSR 230V 7W LED Recessed Emergency Sign - Right
EM256WHSU 230V 7W LED Recessed Emergency Sign - Up
Small (25m) Recessed Mounted Emergency Sign - Double Sided LegendEM256WHDD 230V 7W LED Recessed Emergency Sign - Down
EM256WHDLR 230V 7W LED Recessed Emergency Sign - Left/Right
EM256WHDU 230V 7W LED Recessed Emergency Sign - Up
Ceiling Cut Out: 355 x 65mm. (25M) 3hr maintained only. Self test
WH
Product Approvals
Complies with BS EN 60598
Di
Av
Small Recessed Signs
E93
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
EMER
GEN
CY
SIG
NS
4.8V NiMH Battery
EM486 4.8V 600mAH NiMH Battery For Both EM250 & EM320 Ranges
Spare Part
OVIA® LIGHTING
Notes
E94E94
EMER
GEN
CY
SIG
NS
OUTDOOR LIGHTING
OVIA® LIGHTING
F96F96
OU
TDO
OR
LIG
HTI
NG
LED IP65
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
Please add required finish in to the code e.g. LED500BLBK.
CW BL
BK GY
3 LED’s LED’s are integrated and non-replaceable
230V 3W IP65 Integrated LED Spikelight
Code DescriptionNo. of LED’s
Max Wattage
LED500BLBK 230V 3W IP65 Integrated LED Spikelight - Blue LED - Black 3 3W
LED500BLGY 230V 3W IP65 Integrated LED Spikelight - Blue LED - Grey 3 3W
LED500WHGY 230V 3W IP65 Integrated LED Spikelight - Cool White LED - Grey
3 3W
LED500WHBK 230V 3W IP65 Integrated LED Spikelight - Cool White LED - Black
3 3W
Good protection against ingress of dust and moistureComplies with BS EN 60598
Outdoor - LED
Includes pre-wired flex for termination in a water-proof enclosure, lead: 1.5m.
F97
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
LED’s are integrated and non-replaceable
230V IP44 Integrated LED Up & Down Light
Code Description
LED501BLCH 230V 2 x 1W IP44 Integrated LED Up & Down Light - Blue LED - Chrome
LED501WHCH 230V 2 x 1W IP44 Integrated LED Up & Down Light - Cool White LED - Chrome
CW BL
Complies with BS EN 60598
CH
IP44
Outdoor - LED
OVIA® LIGHTING
F98F98
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
Please add required finish in to the code e.g. LED200WHCH.
CW
SELV - Safety Extra Low VoltageComplies with BS EN 60598
Outdoor - LED
IP44
12V IP44 Integrated LED Cast Star Lights
Code DescriptionNo. of LED’s
Max Wattage
LED200WHCH 12V 0.3W IP44 Integrated (1) LED Cast Star Light - Cool White LED - Chrome
1 0.3W
LED200WHSC 12V 0.3W IP44 Integrated (1) LED Cast Star Light - Cool White LED - Satin Chrome
1 0.3W
LED200WHWH 12V 0.3W IP44 Integrated (1) LED Cast Star Light - Cool White LED - White
1 0.3W
TR301 Electronic LED Driver available on page J177.LED’s are integrated and non-replaceable
Star Light Mounting Plate For LED200
SP202 Star Light Mounting Plate For LED200
The access plate allows for easy fitting of an LED driver or transformer through a 55mm ceiling cutout.
F99
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
WH SC CH
Please add required finish in to the code e.g. LED202WHCH.
TR301 Electronic LED Driver available on page J177. LED’s are integrated and non-replaceable
12V IP44 Integrated LED Mini Star Lights
Code DescriptionNo. of LED’s
Max Wattage
LED202WHCH12V 0.3W IP44 Integrated (1) LED Mini Star Light - Cool White LED - Chrome
1 0.3W
LED202WHSC12V 0.3W IP44 Integrated (1) LED Mini Star Light - Cool White LED - Satin Chrome
1 0.3W
LED202WHWH12V 0.3W IP44 Integrated (1) LED Mini Star Light - Cool White LED - White
1 0.3W
IP44
CW
Outdoor - LED
SELV - Safety Extra Low VoltageComplies with BS EN 60598
OVIA® LIGHTING
F100F100
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
CW BL
SV
LED’s are integrated and non-replaceable
230V 1.5W IP54 Integrated LED 190mm Dia. Round Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED410SVBL 230V 1.5W IP54 Integrated (18) LED 190mm Dia. Round Wall Light - Blue LED - Silver
18 1.5W
LED410SVWH 230V 1.5W IP54 Integrated (18) LED 190mm Dia. Round Wall Light - Cool White LED - Silver
18 1.5W
Good protection against ingress of dust and moistureComplies with BS EN 60598
Suitable for direct mounting on flammable surfaces
Outdoor - LED
IP54
F101
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
Outdoor - LED
LED’s are integrated and non-replaceable
230V 1.5W IP54 Integrated LED 195mm Square Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED420SVBL 230V 1.5W IP54 Integrated (20) LED 195mm Square Wall Light - Blue LED - Silver
20 1.5W
LED420SVWH 230V 1.5W IP54 Integrated (20) LED 195mm Square Wall Light - Cool White LED - Silver
20 1.5W
SV
CW BL
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
Suitable for direct mounting on flammable surfaces
OVIA® LIGHTING
F102F102
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
Outdoor - LED
LED’s are integrated and non-replaceable Pre-wired 0.2m
230V 1.0W IP54 Integrated LED 100mm Square Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED400SVBL 230V 1.0W IP54 Integrated (16) LED 100mm Square Wall Light - Blue LED - Silver
16 1.0W
LED400SVWH 230V 1.0W IP54 Integrated (16) LED 100mm Square Wall Light - Cool White LED - Silver
16 1.0W
CW BL
SV
IP54
Good protection against ingress of dust and moistureComplies with BS EN 60598
F103
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
Outdoor - LED
LED’s are integrated and non-replaceable
230V 3W IP54 Integrated LED Up or Down Light
Code DescriptionNo. of LED’s
Max Wattage
LED502WHAG 230V 3W IP54 Integrated LED Up or Down Light - Warm White LED - Anthracite Grey
3 3W
AG
WW
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
OVIA® LIGHTING
F104F104
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
BA
CW BL
Outdoor - LED
LED’s are integrated and non-replaceable Semi-recessed and pre-wired 0.2m
230V IP54 Integrated LED 140mm Square Semi-Recessed Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED450BABL 230V 1.6W IP54 Integrated (25) LED 140mm Square Wall Light - Blue LED - Brushed Aluminium
25 1.6W
LED450BAWH 230V 1.6W IP54 Integrated (25) LED 140mm Square Wall Light - Cool White LED - Brushed Aluminium
25 1.6W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
F105
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
LED
Product Approvals
Dimensions
Available Finishes
Colour Temperatures
BA
Outdoor - LED
LED’s are integrated and non-replaceable Semi-recessed and pre-wired 0.2m
230V IP54 Integrated LED 240 x 140mm Rectangular Semi-Recessed Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED455BABL 230V 1.8W IP54 Integrated (36) LED 240 x 140mm Rectangular Wall Light - Blue LED - Brushed Aluminium
36 1.8W
LED455BAWH 230V 1.8W IP54 Integrated (36) LED 240 x 140mm Rectangular Wall Light - Cool White LED - Brushed Aluminium
36 1.8W
CW BL
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
OVIA® LIGHTING
F106F106
OU
TDO
OR
LIG
HTI
NG
LED
LED
LED
Outdoor - LED
12 LED’s Pre-wired 0.2m LED’s are integrated and non-replaceable
230V 0.8W IP54 LED 110 x 44mm Rectangular Full Glass Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED470SSBL230V 0.8W IP54 Integrated (12) LED 110 x 44mm Rectangular Full Glass Wall Light - Blue LED - Stainless Steel
12 0.8W
LED470SSWH230V 0.8W IP54 Integrated (12) LED 110 x 44mm Rectangular Full Glass Wall Light - Cool White LED - Stainless Steel
12 0.8W
IP54
IP54
IP54
230V 0.8W IP54 LED 110 x 44mm Rectangular Slotted Glass Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED475SSBL 230V 0.8W IP54 Integrated (12) LED 110 x 44mm Rectangular Slotted Glass Wall Light - Blue LED - Stainless Steel
12 0.8W
LED475SSWH 230V 0.8W IP54 Integrated (12) LED 110 x 44mm Rectangular Slotted Glass Wall Light - Cool White LED - Stainless Steel
12 0.8W
230V 0.8W IP54 LED 170 x 68mm Rectangular Slotted Glass Wall Light
Code DescriptionNo. of LED’s
Max Wattage
LED480SSBL 230V 0.8W IP54 Integrated (16) LED 170 x 68mm Rectangular Slotted Glass Wall Light - Blue LED - Stainless Steel
12 0.8W
LED480SSWH 230V 0.8W IP54 Integrated (16) LED 170 x 68mm Rectangular Slotted Glass Wall Light - Cool White LED - Stainless Steel
12 0.8W
12 LED’s Pre-wired 0.2m LED’s are integrated and non-replaceable
16 LED’s Pre-wired 0.2m LED’s are integrated and non-replaceable
CW BL SS
Colour Temperatures Available Finishes
F107
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Outdoor - LED
Dimensions
Good protection against ingress of dust and moistureComplies with BS EN 60598
Product Approvals
Dimensions
Dimensions
OVIA® LIGHTING
F108F108
OU
TDO
OR
LIG
HTI
NG
Outdoor - Bulkheads
WH BK
Available Finishes
Lamp not included Die cast body with glass diffuser
Lamp not included Die cast body with glass diffuser
Lamp not included Die cast body with glass diffuser
230V E27 60W Max. IP54 Oval Bulkhead
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL400BK 230V E27 60W Max. IP54 Oval Bulkhead - Black
1 E27 60W
OL400WH 230V E27 60W Max. IP54 Oval Bulkhead - White
1 E27 60W
230V E27 60W Max. IP54 Oval Bulkhead With Guard
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL410BK 230V E27 60W Max. IP54 Oval Bulkhead With Guard - Black
1 E27 60W
OL410WH 230V E27 60W Max. IP54 Oval Bulkhead With Guard - White
1 E27 60W
230V E27 60W Max. IP54 Oval Bulkhead With Eyelid
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL420BK 230V E27 60W Max. IP54 Oval Bulkhead With Eyelid - Black
1 E27 60W
OL420WH 230V E27 60W Max. IP54 Oval Bulkhead With Eyelid - White
1 E27 60W
IP54
IP54
IP54
F109
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Outdoor - Bulkheads
Good protection against ingress of dust and moistureComplies with BS EN 60598
Product Approvals
Dimensions
Dimensions
Dimensions
OVIA® LIGHTING
F110F110
OU
TDO
OR
LIG
HTI
NG
Outdoor - Bulkheads
Available Finishes
Lamp not included Die cast body with glass diffuser
Lamp not included Die cast body with glass diffuser
Lamp not included Die cast body with glass diffuser
230V E27 60W Max. IP54 Round Bulkhead
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL405BK 230V E27 60W Max. IP54 Round Bulkhead - Black
1 E27 60W
OL405WH 230V E27 60W Max. IP54 Round Bulkhead - White
1 E27 60W
230V E27 60W Max. IP54 Round Bulkhead With Guard
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL415BK 230V E27 60W Max. IP54 Round Bulkhead With Guard - Black
1 E27 60W
OL415WH 230V E27 60W Max. IP54 Round Bulkhead With Guard - White
1 E27 60W
230V E27 60W Max. IP54 Round Bulkhead With Eyelid
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL425BK230V E27 60W Max. IP54 Round Bulkhead With Eyelid - Black
1 E27 60W
OL425WH230V E27 60W Max. IP54 Round Bulkhead With Eyelid - White
1 E27 60W
IP54
IP54
IP54
WH BK
F111
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Outdoor - Bulkheads
Good protection against ingress of dust and moistureComplies with BS EN 60598
Product Approvals
Dimensions
Dimensions
Dimensions
OVIA® LIGHTING
F112F112
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
AG
Outdoor - Bulkheads
Lamp not included
230V IP54 Low Energy 181mm Dia. Bulkhead
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL214AG 230V GX53 9W IP54 181mm Dia. Bulkhead - Anthracite Grey
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
F113
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
Lamp not included
230V Low Energy IP54 Down Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL210AG 230V GX53 9W Max. IP54 Down Light - Anthracite Grey
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
AG
IP54
OVIA® LIGHTING
F114F114
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
AG
Lamp not included
230V Low Energy IP54 Up or Down Wall Lights
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL211AG 230V GX53 9W Max. IP54 Up or Down Wall Light - Anthracite Grey
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
F115
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
Lamp not included
230V Low Energy IP54 Up & Down Wall Lights
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL212AG 230V GX53 2 X 9W Max. IP54 Up & Down Wall Light - Anthracite Grey
2 GX53 2 x 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
AG
IP54
OVIA® LIGHTING
F116F116
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
AL
Outdoor - General
230V Low Energy IP54 Single Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE601AL 230V GX53 9W Max. IP54 Single Angled Wall Light - Aluminium
1 GX53 9W
Lamp not included
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
F117
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
Lamp not included
230V Low Energy IP54 Twin Wall Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE602AL 230V GX53 2 x 9W Max. IP54 Twin Angled Wall Light - Aluminium
2 GX53 2 x 9W
AL
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
OVIA® LIGHTING
F118F118
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
AL
Lamp not included
230V Low Energy IP54 Surface Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE603AL 230V GX53 9W Max. IP54 Surface Light - Aluminium
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
F119
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
Outdoor - General
AL
Lamp not included
230V Low Energy IP54 Step Surface Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LE604AL 230V GX53 9W Max. IP54 Step Surface Light - Aluminium
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
OVIA® LIGHTING
F120F120
OU
TDO
OR
LIG
HTI
NG
Product Approvals
Dimensions
Available Finishes
SS
Outdoor - General
Lamp not included
230V Low Energy IP65 Walk-Over Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
CF530SS 230V GX53 9W Max. IP65 Round Walk-Over Light - Stainless Steel
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP65
F121
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
LIG
HTI
NG
IP65
Product Approvals
Dimensions
Available Finishes
SS
Outdoor - General
Lamp not included
230V Low Energy IP65 Walk-Over Light
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
CF535SS 230V GX53 9W Max. IP65 Square Walk-Over Light - Stainless Steel
1 GX53 9W
Good protection against ingress of dust and moistureComplies with BS EN 60598
OVIA® LIGHTING
F122F122
OU
TDO
OR
LIG
HTI
NG
Notes
OUTDOOR BOLLARDS
OVIA® LIGHTING
G124G124
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
BK GY
Please add required finish in to the code e.g. OL650BK.
BK GY
Outdoor - Bollards
Lamp not included
230V IP54 Holborn Single Sided Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL650BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL650GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
G125
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
BK GY
Outdoor - Bollards
Please add required finish in to the code e.g. OL655BK.
Lamp not included
230V IP54 Holborn Double Sided Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL655BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL655GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
OVIA® LIGHTING
G126G126
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
BK GY
Outdoor - Bollards
Please add required finish in to the code e.g. OL610BK.
Lamp not included
230V IP54 Leasowe Reflector Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL610BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL610GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
G127
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
BO
LLAR
DS
IP54
Product Approvals
Dimensions
Available Finishes
BK GY
Outdoor - Bollards
Please add required finish in to the code e.g. OL615BK.
Lamp not included
230V IP54 Leasowe Louverd Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL615BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL615GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
OVIA® LIGHTING
G128G128
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
BK GY
Outdoor - Bollards
Please add required finish in to the code e.g. OL622BK.
Lamp not included
230V IP54 Trevose Louverd Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL622BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL622GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
G129
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
BO
LLAR
DS
IP54
Product Approvals
Dimensions
Available Finishes
BK GY
Please add required finish in to the code e.g. OL625BK.
Outdoor - Bollards
Lamp not included
230V IP54 Trevose Diffused Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL625BK 230V E27 IP54 20W Max. Bollard - Black 1 E27 20W
OL625GY 230V E27 IP54 20W Max. Bollard - Grey 1 E27 20W
Good protection against ingress of dust and moistureComplies with BS EN 60598
OVIA® LIGHTING
G130G130
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
BK GY
Please add required finish in to the code e.g. OL640BK.
Outdoor - Bollards
Lamp not included
230V IP54 Trinity Opal Framed Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL640BK 230V E27 IP54 11W Max. Bollard - Black 1 E27 11W
OL640GY 230V E27 IP54 11W Max. Bollard - Grey 1 E27 11W
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP54
G131
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
OU
TDO
OR
BO
LLAR
DS
IP54
Product Approvals
Dimensions
Available Finishes
BK GY
Outdoor - Bollards
Please add required finish in to the code e.g. OL644BK.
Lamp not included
230V IP54 Trinity Opal Slatted Bollard 800mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL644BK 230V E27 IP54 11W Max. Bollard - Black 1 E27 11W
OL644GY 230V E27 IP54 11W Max. Bollard - Grey 1 E27 11W
Good protection against ingress of dust and moistureComplies with BS EN 60598
OVIA® LIGHTING
G132G132
OU
TDO
OR
BO
LLAR
DS
Product Approvals
Dimensions
Available Finishes
Please add required finish in to the code e.g. OL200BK.
Outdoor - Bollards
230V IP65 Modern Bollard 450mm Tall
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
OL200BK 230V GX53 13W Max. Bollard - Black 1 GX53 13W
OL200GY 230V GX53 13W Max. Bollard - Grey 1 GX53 13W
OL200SS 230V GX53 13W Max. Bollard - Stainless Steel 1 GX53 13W
Lamp not included
Spare Diffuser for OL200
SP020BK Spare Diffuser - Black
SP020GY Spare Diffuser - Grey
SP020SS Spare Diffuser - Stainless Steel
BK GY SS
Good protection against ingress of dust and moistureComplies with BS EN 60598
IP65
FIRE & ACOUSTIC
RATED DOWNLIGHTS
The FlameGuard® System has already been incorporated into a selection of our ranges of low voltage and mains downlights. All of the different downlight types are more fully described in the following pages but you may be assured that there is a FlameGuard® protected, fire and acoustic rated downlight to fit virtually every installation requirement. Other related products include optional Moisture Seals to prevent the ingress of moisture laden air into ceiling voids or attic spaces etc... and a specially developed Insulation Support Box which facilitates the laying of an unbroken layer of insulation material directly over any FlameGuard® downlight installation.
FlameGuard® protected, fire and acoustic rated products
ContentsH138 / H144 GU10 Fixed Downlights
H139 GU10 Adjustable Downlights
H140 / H145 Cast Fixed Downlights
H141 Cast Adjustable Downlights
H142 GU5.3 Fixed Downlights
H143 GU5.3 Adjustable Downlights
H147 Downlight Housing
H150 Back Boxes
OVIA® LIGHTING
H136H136
FLAM
EGU
ARD
®
FlameGuard® Construction
A number of lamp holders are available in the FlameGuard® range, all of which are manufactured from ceramic material with double insulated supply cables.
Heavy duty springs are provided to support the downlight in the ceiling. Whilst being strong enough to retain the downlight, they can easily be pulled back to allow the downlight to pass through the ceiling cut-out during installation.
Fitted to all FlameGuard® downlights as standard, the moisture seal prevents warm moist air from passing into the cold space above a ceiling where it could cause condensation to form.
Ceramic lampholder
Spring fixing arms Moisture sealSpring fixing arms Moisture seal
H137
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H137
FLAM
EGU
ARD
®
FlameGuard® Construction
Located inside the top of the downlight and around the outside of the body, the FlameGuard® seals are manufactured from an intumescent material that expands in the event of fire. As the material expands it fills the ventilation holes in the top of the downlight and also seals the ceiling cut-out.
The enclosed metal body of the downlight helps to maintain the sound and airflow rating of the ceiling.
FlameGuard® seal
Metal body
Moisture sealThe design of all FlameGuard® luminaires already inhibits the Flow™ of air through and behind the fitting. This is a crucial feature of their ability to resist the spread of fire. In order to enhance the appeal of FlameGuard® to builders, developers and designers, we are also offering an optional moisture seal for use with the FlameGuard® fittings which are designed to eliminate the Flow™ of moisture laden air into the void behind the downlight and thereby reduce the risk of damp and condensation. Independent tests carried out show impressive further reductions of airflow through FlameGuard® fittings fitted with the moisture seal, all in compliance with BS5250:2002
Flow™ plug-in connectorWe recognise that your time is money, our plug-in connector gives you easy access with large terminals and fast connection. Designed initially for lighting circuits to enable isolation of transformers, control gear etc. whilst conducting the 1000V insulation resistance test.
• 250V~ 20A plug-in connector• Large terminals with easy access• Terminal screws supplied raised• Easy lock and release mechanism• Versatile, easy-connection system• Increased load handling with
20A rating• Male: Max 1.5mm² 3 core cable;
Female: Max 3 x 2.5mm² twin and earth (with additional loop terminal)
Located inside the top of the downlight and around the outside of the body, the FlameGuard® seals are manufactured froan intumescent material that expands inevent of fire. As the material expands it fiventilation holes in the top of the downligand also seals the ceiling cut-out.
The enclosed metal body of the downlighelps to maintain the sound and airflowof the ceiling.
Metal body
OVIA® LIGHTING
H138H138
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
WH SC CH AB
Fixed Downlights
Please add required finish in to the code e.g. GU315AB.
Complies with BS EN 60598
Lamp not included
230V Fixed Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU315AB 230V GU10 50W Max. Fixed Downlight - Antique Brass 1 GU10 50W
GU315CH 230V GU10 50W Max. Fixed Downlight - Chrome 1 GU10 50W
GU315SC 230V GU10 50W Max. Fixed Downlight - Satin Chrome 1 GU10 50W
GU315WH 230V GU10 50W Max. Fixed Downlight - White 1 GU10 50W
H139
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H139
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
WH SC CH AB
Please add required finish in to the code e.g. GU320AB.
Adjustable Downlights
Lamp not included
230V Adjustable Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU320AB 230V GU10 50W Max. Adjustable Downlight - Antique Brass 1 GU10 50W
GU320CH 230V GU10 50W Max. Adjustable Downlight - Chrome 1 GU10 50W
GU320SC 230V GU10 50W Max. Adjustable Downlight - Satin Chrome 1 GU10 50W
GU320WH 230V GU10 50W Max. Adjustable Downlight - White 1 GU10 50W
Complies with BS EN 60598
OVIA® LIGHTING
H140H140
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
WH SC CH AB
Please add required finish in to the code e.g. GU300AB.
Cast Fixed Downlights
Lamp not included
230V Cast Fixed Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU300AB 230V GU10 50W Max. Fixed Downlight - Antique Brass 1 GU10 50W
GU300CH 230V GU10 50W Max. Fixed Downlight - Chrome 1 GU10 50W
GU300SC 230V GU10 50W Max. Fixed Downlight - Satin Chrome 1 GU10 50W
GU300WH 230V GU10 50W Max. Fixed Downlight - White 1 GU10 50W
Complies with BS EN 60598
H141
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H141
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
WH SC CH AB
Please add required finish in to the code e.g. GU305AB.
Cast Adjustable Downlights
Lamp not included
230V Cast Adjustable Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU305AB 230V GU10 50W Max. Adjustable Downlight - Antique Brass 1 GU10 50W
GU305CH 230V GU10 50W Max. Adjustable Downlight - Chrome 1 GU10 50W
GU305SC 230V GU10 50W Max. Adjustable Downlight - Satin Chrome 1 GU10 50W
GU305WH 230V GU10 50W Max. Adjustable Downlight - White 1 GU10 50W
Complies with BS EN 60598
OVIA® LIGHTING
H142H142
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
Fixed Downlights
Please add required finish in to the code e.g. LV315CH.
Lamp not included
12V 50W Max. Fixed Downlights c/w Flow™ Connector, Moisture Seal & 60va Transformer
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LV315CH 12V GU5.3 50W Max. Fixed Downlight - Chrome 1 GU5.3 50W
LV315SC 12V GU5.3 50W Max. Fixed Downlight - Satin Chrome 1 GU5.3 50W
LV315WH 12V GU5.3 50W Max. Fixed Downlight - White 1 GU5.3 50W
WH SC CH
Complies with BS EN 60598
D
A
Pc
H143
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H143
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
Adjustable Downlights
Please add required finish in to the code e.g. LV320CH.
Lamp not included
12V 50W Max. Adjustable Downlights c/w Flow™ Connector, Moisture Seal & 60va Transformer
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LV320CH 12V GU5.3 50W Max. Adjustable Downlight - Chrome 1 GU5.3 50W
LV320SC 12V GU5.3 50W Max. Adjustable Downlight - Satin Chrome 1 GU5.3 50W
LV320WH 12V GU5.3 50W Max. Adjustable Downlight - White 1 GU5.3 50W
Complies with BS EN 60598
WH SC CH
OVIA® LIGHTING
H144H144
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
Please add required finish in to the code e.g. GU4101CH.
Fixed Downlights
Lamp not included
230V Fixed 110mm Dia. Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU4101CH 230V GU10 50W Max. Fixed Downlight - Chrome 1 GU10 50W
GU4101SC 230V GU10 50W Max. Fixed Downlight - Satin Chrome 1 GU10 50W
GU4101WH 230V GU10 50W Max. Fixed Downlight - White 1 GU10 50W
Complies with BS EN 60598
WH SC CH
H145
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H145
FLAM
EGU
ARD
®
Product Approvals
Dimensions
Available Finishes
Includes
Connector
Please add required finish in to the code e.g. GU4201CH.
Cast Fixed Downlights
Lamp not included
230V Cast Fixed 118mm Dia. Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU4201CH 230V GU10 50W Max. Fixed Downlight - Chrome 1 GU10 50W
GU4201SC 230V GU10 50W Max. Fixed Downlight - Satin Chrome 1 GU10 50W
GU4201WH 230V GU10 50W Max. Fixed Downlight - White 1 GU10 50W
Complies with BS EN 60598
WH SC CH
OVIA® LIGHTING
H146H146
FLAM
EGU
ARD
®
Dimensions
Available Finishes
Product ApprovalsIncludes
Connector
Please add required finish in to the code e.g. GU4211CH.
Cast Fixed Downlights
Complies with BS EN 60598
Lamp not included
230V Cast Fixed 122mm Square Downlights c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU4211CH 230V GU10 50W Max. Fixed Downlight - Chrome 1 GU10 50W
GU4211SC 230V GU10 50W Max. Fixed Downlight - Satin Chrome 1 GU10 50W
GU4211WH 230V GU10 50W Max. Fixed Downlight - White 1 GU10 50W
WH SC CH
H147
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H147
FLAM
EGU
ARD
®
Product Approvals Includes
Connector
Dimensions
Available Finishes
Downlight Housing
Please add required finish in to the code e.g. GU4300CH.
WH SC CH
230V Fixed Downlight Housing c/w Flow™ Connector & Moisture Seal
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU4301 230V GU10 50W Max. IP65 Fixed Downlight Housing 1 GU10 50W
Lamp not included Requires Bezel (GF4300, GF4310, GF4311) not included
Cast Downlight Bezels
GF4300* Cast IP65 118mm Diameter Bezel
GF4301* Cast IP65 122mm Square Bezel
GF4311* Cast Bezel With Halo Glass
Requires GU4301 or LE5301 Housing
Complies with BS EN 60598
IP65
OVIA® LIGHTING
H148H148
FLAM
EGU
ARD
®
Dimensions
Available Finishes
Product ApprovalsIncludes
Connector
Downlight Housing
WH SC CH
Complies with BS EN 60598
IP65
230V IP65 Fixed Downlight Housing c/w Flow™ Connector
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
GU395 230V GU10 50W Max. IP65 Fixed Downlight Housing 1 GU10 50W
Lamp not included Requires Bezel (GF495) not included
Cast Downlight BezelsGF495CH Cast IP65 Bezel - Chrome
GF495SC Cast IP65 Bezel - Satin Chrome
GF495WH Cast IP65 Bezel - White
Requires GU395 or GZ096 Housing
H149
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H149
FLAM
EGU
ARD
®
Dimensions
Available Finishes
Product Approvals Includes
Connector
Downlight Housing
12V 50W Max. IP65 Fixed Downlight Housing c/w Flow™ Connector, Moisture Seal & 60Va Transformer
Code DescriptionNo. of Lamps
Lampholder Type
Max Wattage
LV395 12V GU5.3 50W Max. IP65 Fixed Downlight Housing 1 GU5.3 50W
Lamp not included Requires Bezel (GF495) not included
Cast Downlight BezelsGF495CH Cast IP65 Bezel - Chrome
GF495SC Cast IP65 Bezel - Satin Chrome
GF495WH Cast IP65 Bezel - White
Requires GU395 or GZ096 Housing
Complies with BS EN 60598
IP65
WH SC CH
OVIA® LIGHTING
H150H150
FLAM
EGU
ARD
®
Dimensions
Insulation Support Boxes
Code Description
GB440 Insulation Support Box To Span 400mm Truss Centres
GB460 Insulation Support Box To Span 600mm Truss Centres
FlameGuard® Back Boxes
Community Registered Design No. 000390091-0001
As an integral part of the development of the FlameGuard® System, our engineers and designers have also been examining other issues connected with the installation of downlights. One such issue has been the matter of insulation around the back of a downlight in a ceiling void or attic for example.Insulation Support Box allows free air circulation around luminaire and provides rigid skin over which insulation can be laid.
Good building practise dictates that insulation material is laid, unbroken, over the whole floor area. Good electrical practise however dictates that a minimum amount of free air is left around a luminaire in order to allow any heat build-up from the light source to be dissipated. Our new Insulation Support Box satisfies both of these requirements without compromising either.
GB440/460
H151
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H151
FLAM
EGU
ARD
®
Dimensions
FlameGuard® Back Boxes
Insulation Support Boxes
Code Description
GB400 Flatpacked Steel Insulation Support Box 220x220x120mm
GB470 Insulation Support Box 340-620mm Between Floors
Community Registered Design No. 000497433-0001
Before any insulation is laid, either at first or second fix the Support Boxes are installed in a semi-permanent fashion as required. Once installed, the Support Boxes allow sufficient circulation of air around the downlight to satisfy the electrician’s requirement and the enclosed nature of the Box allows the builder to install an unbroken insulation barrier.The Insulation Support Boxes also accommodate transformers used in low voltage installations, thereby allowing any necessary maintenance to be carried out through the downlight cut-out in the ceiling. The GB440 and 460 Insulation Support Boxes are available
in two different sizes with fixing centres at 400mm and 600mm, designed to fit the vast majority of truss spacings in new builds in the U.K. The pressed steel construction of the Support Box is strong enough to carry a weight of approx. 100kgs without distorting.The adjustable Insulation Support Box (Item GB470) has been designed specifically to be installed between floors or in flat roofs and can be installed from above or below. The new free standing Support box (Item GB400) is supplied in flat galvanised steel for quick easy folding on site.
GB470 Installation from below
GB400
OVIA® LIGHTING
H152H152
FLAM
EGU
ARD
®
Dimensions
FlameGuard® Back Boxes
Cavity Wall Boxes
Code Description Depth
WA4135 1 Gang 35mm Deep FG Dry Lining Box 35mm
WA4235 2 Gang 35mm Deep FG Dry Lining Box 35mm
1 gang and 2 gang boxes in both 35mm and 47mm depths, as simple to install as a standard cavity wall box.
Building Regulations are becoming more stringent in today’s modern world, with alternative building materials and products being developed with improved safety in mind.
Based upon our development and test work carried out with the original FlameGuard® downlights it very quickly became apparent that standard PVC, polycarbonate or urea materials could not tolerate the high temperatures encountered in a major fire. A durable all metal construction was therefore chosen.
The One & Only Range of Fire & Acoustic Rated Metal Dry Lining Back Boxes
H153
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H153
FLAM
EGU
ARD
®
Dimensions
FlameGuard® Back Boxes
Product Approvals
Cavity Wall Boxes
Code Description Depth
WA4147 1 Gang 47mm Deep FG Dry Lining Box 47mm
WA4247 2 Gang 47mm Deep FG Dry Lining Box 47mm
FlameGuard® back boxes have been tested and conform to both fire and acoustic BS EN standards Fire: BS EN 1363-1: 1999 & BS EN 1364-1: 1999 Acoustic: BS EN ISO 140-3: 1995 & BS EN ISO 717-1: 1997 Complies with Building Regulations. Fire tested up to 90 minutes with the capability of the boxes being mounted back to back
• No additional components to purchase or install
• Simple and quick to install saving time and money
• Unique spring loaded lugs
• Substantial amount of cable entries
• Earth terminal fitted
OVIA® LIGHTING
H154H154
FLAM
EGU
ARD
®
Bathroom Equipment Zones
There are a number of special requirements for fitting lights in bathrooms and to clarify these requirements, certain zones have been created. Within each of these zones only fittings with certain minimum IP ratings can be installed. The basic recommendations are set out above.
ZONE 0: MINIMUM REQUIREMENT IPX7Zone 0 is the interior of the bath tub or shower basin. Only Low voltage (SELV) fittings are permitted with the
transformer located outside all zones.
ZONE 1: MINIMUM REQUIREMENT IPX4Zone 1 is the area around the bath or shower basin up to a height of 2.25m above floor levels and at a radius of 1.2m from the water outlet. If there is a likelihood of water jets being used for cleaning purposes, then this becomes a minimum requirement of IPX5.
ZONE 2: MINIMUM REQUIREMENT IPX4Zone 2 is limited by the vertical planes external to zone 1 and parallel vertical planes(s) 0.60m external to zone 1. If there is a likelihood of water jets being used for cleaning purposes, then this becomes a minimum requirement of IPX5. For showers without a basin, there is no zone 2 but an increased zone 1.
IMPORTANTProtection for all electrical fixtures within the bathroom and shower should be provided by the use of an RCD with a rated residual current not exceeding 30mA and an operating time not exceeding 40ms.
Outside Zone
Outside Zone Outside Zone
0.60m
0.10m
0.60m0.60m
2.25m
Zone 0 - Minimum IPX7 can be used
Zone 1 - Minimum IPX4 can be used
Zone 2 - Minimum IPX4 can be used
Outside Zone - Minimum IPX2 can be used
H155
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H155
FLAM
EGU
ARD
®
Click® House
Choose from our comprehensive range
and safety
H151(Insulation Support)
H150(Insulation Support)
H137(Condensation Control)
H149(IP Rated LED)
H140(Low Energy LED)
H145(Professional Cast)
Versatile and decorative, FlameGuard® system products are suitable for a wide range of domestic and commercial applications.
Illustrated above are just some of those typical applications.
OVIA® LIGHTING
H156H156
FLAM
EGU
ARD
®
Technical Specifications
The complete range of electrical accessoriesIn addition to the FlameGuard® range illustrated herein, a host of other electrical products are available. If you require any wiring accessories please see our Wiring Accessories Catalogue.
For further information on any of these products please call our sales office on 01827 63454.
In’tu’mes’centDictionary definition – Swelling up, expanding.
How does it work?The FlameGuard® intumescent seal, when exposed to fire, forms a dense carbon char which separates and insulates the substrate from the heat of the fire. The expanded seal eliminates the FlowTM of air through the void and thereby starves the fire of vital elements for combustion.
Complies with Class 3 safety extra-low voltage (selv) requirements of BS EN 60598
Metal web joists
Combination of timber runners with metal webbing.
Solid timber
Traditional solid wood joist which has been used in house
building for decades.
Engineered ‘I’ beam joists
Combining an engineered composite panel with high
grade softwood.
III
With the nature of fire testing and the different types of joists, do not take it for granted that a downlight tested in a solid timber construction will maintain the same integrity within a construction using metal web or engineered ‘I’ beam joists.FlameGuard® has been fire tested in floor constructions with these types of modern joists, and is compliant for both 30 and 60 minutes to BS EN 1365:2000
H157
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
H157
FLAM
EGU
ARD
®
Approvals & Standards
Tested in accordance with robust details requirements.
ACCEPTED BY:
NHBC
If you would like to view a copy of the FlameGuard® approvals Compendium, containing test and approvals data evidencing compliance with all of the latest regulations relating to Fire Safety, Noise Ingress and Control of Airborne Moisture etc., please call 01827 63454 or e-mail us at [email protected]
FlameGuard® System downlights have been fully tested and approved as fire and acoustic rated fittings according to the following criteria:
Complies with Part B of Building regulations.
Fire tested to full 90 minute rating and approved to BS 476 Part 21 1987 with solid timber joists.
Fire tested to 60 minutes rating by BRE and approved to BS EN 1365-2: 2000 with both metal web and ‘I’ beam engineered joists.
Fire & Acoustic testing carried out using plasterboard, timber joist and tongue and groove floor construction.
Acoustically tested and approved by The Building Test Centre to BS EN ISO 140-3: 1995, BS EN ISO 140-6: 1998, BS EN ISO 7171: 1997,BS EN ISO 717-2: 1997 and Appendix F of Robust Details Ltd. All in compliance with the relevant sections of Part E of Building Regulations.
Tested in accordance with Robust Details requirements.
FlameGuard® downlights are accepted by the NHBC as satisfying their requirements relating to levels of air movement through the fitting.
Testing carried out in relation to Part C of Building Regs. As it relates to passage of moisture laden air into cold spaces such as lofts etc., in compliance with BS5250: 2002.
All FlameGuard® luminaires are supplied with comprehensive and easy to follow installation instructions in compliance with Part P of Building Regulations.
The Low Energy FlameGuard® fitting meets the requirements of Part L of Building Regulations relating to the installation of low energy luminaires.
Complies with Scottish Building Regulations, Section 2 (fire), Section 3 (air movement) and Section 5 (noise).
OVIA® LIGHTING
H158H158
FLAM
EGU
ARD
®
Dimensions & Air Flow Characteristics
The table above is designed to illustrate which fittings are suitable for retro fitting in installations where cut-out and recess parameters are restricted.
Recessed ceiling lights (downlights) are a potential leakage path for the convection of moist air through a ceiling and consequential problems in the roof or loft space.
Building Regulations Approved Document Part C2: 2004 Resistance to moisture refers to BS 5250: 2002 as the main means of compliance with the requirement laid down in relation to resistance to damage from interstitial and surface condensation.
Amendment No. 1 (December 2005) to BS 5250: 2002: Code of Practice for control of ventilation in buildings (Clause 8.4.1.2 thereof) requires that the leakage through all downlights in a ceiling beneath a roof should not exceed 0.06m3/h m2 at a pressure difference of 2 Pa in order to restrict moisture ingress into roofs, BS 5250: 2002 invokes BS EN 13141-1: 2004: Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 1: Externally and internally mounted air transfer devices for the test procedure to be used to determine the air leakage through downlights.
The National House-Building Council (NHBC) also requires that downlights be tested for air leakage compliance to BS 5250: 2002 by an independent organization (NHBC Technical Newsletter, Dec 2004, Issue 31).
Product Code Description Cut-OutRecess Depth
Air Flow Page
GU315 230V 50W Fixed Downlight 69mm 72mm 0.023 H138
LV315 12V 50W Fixed Downlight 69mm 72mm 0.023 H142
GU300 230V 11W Fixed Downlight 68mm 110mm 0.052 H140
GU320 230V 50W Adjustable Downlight 79mm 81mm 0.119 H139
LV320 12V 50W Adjustable Downlight 79mm 81mm 0.119 H143
GU305 230V 50W Adjustable Downlight 83mm 100mm 0.046 H141
GU4101 230V 50W Fixed Downlight 94mm 128mm 0.412 H144
GU4201 Cast 230V 50W Fixed Downlight 94mm 128mm 0.412 H145
GU4211 Cast 230V 50W Fixed Downlight 94mm 128mm 0.412 H146
GU4301 Cast 230V 50W Fixed Downlight 94mm 128mm 0 H147
THE FLOW TM RANGE
With the emphasis now on flexibility and ease of installation many building design projects are focussing on products and services that can adapt to changing legislation, energy efficiency and the ever changing needs of the client.
Applications include offices, Sports halls, Exhibitions, Kitchens, Display Lighting, Domestic installations, temporary installations, Under floor wiring, Inside lighting columns, instead of a conventional junction box and many more.
Flow™ Connectors, simplicity, connectivity and control...
ContentsI162 Flow™ Distribution Hubs
I164 Flow™ Connectors
OVIA® LIGHTING
I162I162
FLO
W™
Flow™ Boxes
The CT1016 & CT1008 can be mounted into cable suspension trays.
Mounting tray available. Sold separately. (SP1016)
management boxes...
• Suitable for loads up to 20A which means it can be used for more than just lighting
• Management boxes can be controlled or dimmed using suitable PIR sensors or mains dimmers
• Can incorporate wireless switching and dimming scenarios using Click® Smart products
• Durable heavy duty finish to withstand all installation requirements
• Ample fixing points to suit any method of installation
• IP20 rated
MAINS SUPPLY
20A MAX
Switching Options:
• P.I.R.s• Suitable for use
with dimmers
Testing:
• EMT (Emergency Test)
CT1016: Use the CT1016 to take control of up to 16 lights (24 using the CT350), with three different switching configurations. Example above: 2 way switching
CT1016
I163
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
I163
FLO
W™
Dimensions
Dimensions
Product Approvals
BS 8488:2009+A1:2010IEC EN 61535:2009+A1:2013+C1:2014BS 5733:2010+A1:2014
Flow™ Boxes
Mounting Tray For CT1016 & CT1008Code Description
SP1016 Mounting Tray For CT1016 & CT1008
20A 8 Way Distribution BoxCode Description
CT1008 20A 8 Way Distribution Box
20A 16 Way Lighting Management BoxCode Description
CT1016 20A 16 Way Lighting Management Box
Dimensions
OVIA® LIGHTING
I164I164
FLO
W™
Product Approvals
Dimensions
Dimensions
Dimensions
Flow™ Connectors
BS 8488:2009+A1:2010IEC EN 61535:2009+A1:2013+C1:2014
BS 5733:2010+A1:2014
250V 20A 3 Pin Flow™ Connector Screw-Down Cord GripCode Description
CT102C 250V 20A 3 Pin Flow™ Connector Screw-Down Cord Grip
250V 20A 3 Pin Flow™ ConnectorCode Description
CT101C 250V 20A 3 Pin Flow™ Connector
250V 20A 4 Pin Splitter (1 in 2 Out)Code Description
CT350 250V 20A 4 Pin Splitter (1 in 2 Out)
I165
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
I165
FLO
W™
Product Approvals
Dimensions
Dimensions
Dimensions
Flow™ Connectors
BS 8488:2009+A1:2010IEC EN 61535:2009+A1:2013+C1:2014BS 5733:2010+A1:2014
250V 20A 4 Pin Flow™ Connector Fast-Fit Cord GripCode Description
CT203C 250V 20A 4 Pin Flow™ Connector Fast-Fit Cord Grip
CT203M 250V 20A 4 Pin Flow™ Fast-Fit Cord Grip (Male Connector Only)
250V 20A 4 Pin Flow™ Connector Screw-Down Cord GripCode Description
CT202C 250V 20A 4 Pin Flow™ Connector Screw-Down Cord Grip
250V 20A 3 Pin Flow™ Connector Fast-Fit Cord GripCode Description
CT103C 250V 20A 3 Pin Flow™ Connector Fast-Fit Cord Grip
CT103M 250V 20A 3 Pin Flow™ Fast-Fit Cord Grip (Male Connector Only)
OVIA® LIGHTING
I166I166
FLO
W™
Dimensions
Dimensions
Dimensions
Product Approvals
Flow™ Connectors
250V 20A 3 Pin Flow™ Switch AdaptorCode Description
CT1300 250V 20A 3 Pin Flow™ Switch Adaptor
IEC EN 61535:2009+A1:2013+C1:2014BS 5733:2010+A1:2014
250V 20A 4 Pin Flow™ Ceiling Rose (Without Cover)Code Description
CT1400 250V 20A 4 Pin Flow™ Ceiling Rose (Without Cover)
CT1400 Ceiling Rose CoverCode Description
CT1401 CT1400 Ceiling Rose Cover
™ C
Easily adds a switched live into a Flow™ circuit
I167
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
I167
FLO
W™
Dimensions
Product Approvals
Flow™ Connectors
BS 8488:2009+A1:2010IEC EN 61535:2009+A1:2013+C1:2014BS 5733:2010+A1:2014
Low Smoke Zero Halogen Pre-Wired CablesCode Description
CT732 6A 3 Pole 0.75mm LSZH To FE 2m - Black
CT733 6A 3 Pole 0.75mm LSZH To FE 3m - Black
CT735 6A 3 Pole 0.75mm LSZH To FE 5m - Black
CT742 6A 4 Pole 0.75mm LSZH To FE 2m - Black
CT743 6A 4 Pole 0.75mm LSZH To FE 3m - Black
CT745 6A 4 Pole 0.75mm LSZH To FE 5m - Black
CT845 20A 4 Pole 2.5mm Male To Female LSZH 5m - Black
6A 4 Pin Pre Wired Link CablesCode Description
CT802 6A 4 Pin Flow™ Extension Cable - 2 Metre
CT803 6A 4 Pin Flow™ Extension Cable - 3 Metre
CT805 6A 4 Pin Flow™ Extension Cable - 5 Metre
250V 20A 4 Pin (1 in 3 Out) Flow™ Hub Junction BoxCode Description
CT300 250V 20A 4 Pin (1 in 3 Out) Flow™ Hub Junction Box
OVIA® LIGHTING
I168I168
FLO
W™
Notes
LAMPS & ACCESSORIES
Only lamps that have undergone rigorous testing and meet or exceed all current directives and legislation will be included in the range as we further develop the product portfolio.
Our Ovia® Lamp range comprises a number of GU10 lamps which incorporate the latest SMD (surface mounted diode) technology. SMD technology enables manufacturers to produce lamps that offer a better quality light output, are more affordable and continue to offer the significant energy savings associated with LED technology.
Ovia® Lamps... 25,000 hours lifetime, 85% energy savings, 100% instant full light!
ContentsJ172 LED Lamps
J176 Lamps
J177 Transformers
OVIA® LIGHTING
J172J172
LED
LAM
PS
LED
The Ovia® Lamps range is covered by a 2 year warranty. For warranty information please visit www.scolmore.com
Product Warranty
Dimensions
2 YEARPRODUCT WARRANTY
Y IJAIE IA
A++
A+
A A+
Colour Temperatures
WW CW
LED Lamps
600CD Beam IntensityVoltage 50/60HZ 220-240V
35mA Current
230V GU10 4W SMD LED Non-Dimmable 36°
Code WattageWattage
EquivColour
TemperatureLumens Cap Dimmable
OVLA1001W4 4W 35W 2700K 250lm GU10 No
OVLA1002C4 4W 35W 4000K 250lm GU10 No
J173
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
LED
LAM
PS
LED
The Ovia® Lamps range is covered by a 2 year warranty. For warranty information please visit www.scolmore.com
Product Warranty
Dimensions
2 YEARPRODUCT WARRANTY
Y IJAIE IA
A++
A+
A A+
Colour Temperatures
WW CW
LED Lamps
230V GU10 5W SMD LED Dimmable 36°
Code WattageWattage
EquivColour
TemperatureLumens Cap Dimmable
OVLA1003W5D 5.5W 50W 2700K 350lm GU10 Yes
OVLA1004C5D 5.5W 50W 4000K 350lm GU10 Yes
900CD Beam IntensityVoltage 50/60HZ 220-240V
40mA Current
OVIA® LIGHTING
J174J174
LED
LAM
PS
LED
The Ovia® Lamps range is covered by a 2 year warranty. For warranty information please visit www.scolmore.com
Product Warranty
Dimensions
2 YEARPRODUCT WARRANTY
Colour Temperatures
Y IJAIE IA
A++
A+
A A+
LED Lamps
230V G9 2.3W LED Non-Dimmable 280°
Code WattageWattage
EquivColour
TemperatureLumens Cap Dimmable
OVLA7001W2 2.3W 22W 3000K 215lm G9 No
Voltage 50HZ 230V30mA Current
WW
A++
J175
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
LED
LAM
PS
The Ovia® Lamps range is covered by a 2 year warranty. For warranty information please visit www.scolmore.com
Product Warranty
Dimensions
2 YEARPRODUCT WARRANTY
Y IJAIE IA
A++
A+
A A+
Colour Temperatures
LED Lamps
230V GX53 3.3W Non-Dimmable 110°
Code WattageWattage
EquivColour
TemperatureLumens Cap Dimmable
OVLA9001C3 3.3W N/A 4000K 250lm GX53 No
Voltage 50HZ 230V30mA Current
CW
LED
OVIA® LIGHTING
J176J176
LED
LAM
PSAccessories & Lamps
SP030 SP200 SP210
Halogen LampsCode Description
LA305 230V GU10 50W 40° Aluminium Reflector Lamp
Innovative Lamp Removal ToolsCode Description
SP130 Lamp Extraction Tool
SP250 Lamp Extraction Tool With Handle
Spare PartsCode Description
SP030 50mm Spring Lamp Retaining Ring
SP200 12V GU5.3 Sprung Ceramic Lampholder With 2 X 200mm Tails
SP210 230V GZ10 Lampholder & Bracket
SP130 SP250
J177
[email protected] | Call: 01827 63454 | Fax: 01827 63362 | scolmore.com
LED
LAM
PS
Transformers
12V 20-60Va Pre-Wired Electronic TransformerCode Description
TR060 12V 20-60Va Pre-Wired Electronic Transformer
12V 0.5 -15W LED DriverCode Description
TR301 12V 0.5 -15W LED Driver
Dimensions
Dimensions
Complies with BS EN 60598
Complies with BS EN 60598
Product Approvals
Product Approvals
OVIA® LIGHTING
J178J178
LED
LAM
PSNotes
PRODUCT INDEX
II
Ovia® Lighting Catalogue Issue 6
INDEX
B BZ4605CH A5
BZ4605SC A5
BZ4605WH A5
C CF240SV B52
CF530SS F120
CF535SS F121
CT101C I164
CT102C I164
CT103C I165
CT103M I165
CT202C I165
CT203C I165
CT203M I165
CT300 I167
CT350 I164
CT732 I167
CT733 I167
CT735 I167
CT742 I167
CT743 I167
CT745 I167
CT802 I167
CT803 I167
CT805 I167
CT845 I167
CT1008 I163
CT1016 I163
CT1300 I166
CT1400 I166
CT1401 I166
E EM251SVSD E82
EM251SVSL E82
EM251SVSR E82
EM251SVSU E82
EM252SVDD E84
EM252SVDLR E84
EM252SVDU E84
EM252SVSD E84
EM252SVSL E84
EM252SVSR E84
EM252SVSU E84
EM253SVDD E86
EM253SVDLR E86
EM253SVDU E86
EM253SVSD E86
EM253SVSL E86
EM253SVSR E86
EM253SVSU E86
EM254SVDD E88
EM254SVDLR E88
EM254SVDU E88
EM254SVSD E88
EM254SVSL E88
EM254SVSR E88
EM254SVSU E88
EM255SVDD E90
EM255SVDLR E90
EM255SVDU E90
EM255SVSD E90
EM255SVSL E90
EM255SVSR E90
EM255SVSU E90
EM256WHDD E92
EM256WHDLR E92
EM256WHDU E92
EM256WHSD E92
EM256WHSL E92
EM256WHSR E92
EM256WHSU E92
EM321SVSD E83
EM321SVSL E83
EM321SVSR E83
EM321SVSU E83
EM322SVDD E85
EM322SVDLR E85
EM322SVDU E85
EM322SVSD E85
EM322SVSL E85
EM322SVSR E85
EM322SVSU E85
EM324SVDLR E89
EM324SVDU E89
EM324SVSD E89
EM324SVSL E89
EM324SVSR E89
EM324SVSU E89
EM325SVDLR E91
EM325SVDU E91
EM325SVSD E91
EM325SVSL E91
EM325SVSR E91
EM325SVSU E91
EM332WHSD E87
EM332WHSL E87
EM332WHSR E87
EM332WHSU E87
EM486 E93
EMCGLED2305M3 A34
III
INDEX
Ovia® Lighting Catalogue Issue 6
G GB400 H151
GB440 H150
GB460 H150
GB470 H151
GF140CG C66
GF145CG C66
GF147CG C66
GF240CG C67
GF245CG C67
GF247CG C67
GF495CH C65, H148, H149
GF495SC C65, H148, H149
GF495WH C65, H148, H149
GF4300CH C72, H147
GF4300SC C72, H147
GF4300WH C72, H147
GF4301CH C72, H147
GF4301SC C72, H147
GF4301WH C72, H147
GF4311CH C72, H147
GF4311SC C72, H147
GF4311WH C72, H147
GU300AB H140
GU300CH H140
GU300SC H140
GU300WH H140
GU305AB H141
GU305CH H141
GU305SC H141
GU305WH H141
GU315AB H138
GU315CH H138
GU315SC H138
GU315WH H138
GU320AB H139
GU320CH H139
GU320SC H139
GU320WH H139
GU395 H148
GU4101CH H144
GU4101SC H144
GU4101WH H144
GU4201CH H145
GU4201SC H145
GU4201WH H145
GU4211CH H146
GU4211SC H146
GU4211WH H146
GU4301 H147
GZ015CH C62
GZ015SC C62
GZ015WH C62
GZ020CH C63
GZ020SC C63
GZ020WH C63
GZ096 C64
I ISC1020 A34
L LA305 J176
LE105CH B55
LE105SC B55
LE120WH C66
LE220WH C67
LE510SV B53
LE520SV B54
LE601AL B48, F116
LE602AL B49, F117
LE603AL F118
LE604AL F119
LE611CH B50
LE612CH B51
LE5101CH C70
LE5101SC C70
LE5101WH C70
LE5201CH C69
LE5201SC C69
LE5201WH C69
LE5211CH C68
LE5211SC C68
LE5211WH C68
LE5301 C71
LED200WHCH F98
LED200WHSC F98
LED200WHWH F98
LED202WHCH F99
LED202WHSC F99
LED202WHWH F99
LED301WHWH B56
LED302WHWH B56
LED303WHWH B57
IV
INDEX
Ovia® Lighting Catalogue Issue 6
L LED305WH B57
LED310WHAL B38
LED310WHWH B38
LED311ALBL B40
LED311ALWH B40
LED312ALBL B41
LED312ALWH B41
LED313WHBK B42
LED313WHWH B42
LED314WHBK B43
LED314WHWH B43
LED315WHBK B39
LED315WHWH B39
LED316WHBK B46
LED316WHWH B46
LED325BLBS B44
LED325WHBS B44
LED326BLBS B45
LED326WHBS B45
LED400SVBL F102
LED400SVWH F102
LED410SVBL F100
LED410SVWH F100
LED420SVBL F101
LED420SVWH F101
LED450BABL F104
LED450BAWH F104
LED455BABL F105
LED455BAWH F105
LED470SSBL F106
LED470SSWH F106
LED475SSBL F106
LED475SSWH F106
LED480SSBL F106
LED480SSWH F106
LED500BLBK F96
LED500BLGY F96
LED500WHBK F96
LED500WHGY F96
LED501BLCH B47, F97
LED501WHCH B47, F97
LED502WHAG F103
LED3500CH5CD A16
LED3500CH5WD A16
LED3500SC5CD A16
LED3500SC5WD A16
LED3500WH5CD A16
LED3500WH5WD A16
LED3600CH5CD A20
LED3600CH5WD A20
LED3600SC5CD A20
LED3600SC5WD A20
LED3600WH5CD A20
LED3600WH5WD A20
LED4600CH7D A4
LED4600SC7D A4
LED4600WH7D A4
LED5400CH5CD A10
LED5400CH5WD A10
LED5400SC5CD A10
LED5400SC5WD A10
LED5400WH5CD A10
LED5400WH5WD A10
LED5405CH5CD A11
LED5405CH5WD A11
LED5405SC5CD A11
LED5405SC5WD A11
LED5405WH5CD A11
V
INDEX
Ovia® Lighting Catalogue Issue 6
LED5405WH5WD A11
LED9001BK A31
LED9002BK A31
LED9003BK A31
LED9500WH9 A28
LED9500WH9MS A28
LED9500WH9MS3EM A28
LED9500WH93EM A28
LED9505WH9 A29
LED9505WH9MS A29
LED9505WH9MS3EM A29
LED9505WH93EM A29
LV315CH H142
LV315SC H142
LV315WH H142
LV320CH H143
LV320SC H143
LV320WH H143
LV395 H149
M MM1000BL B58
MM1000CW B58
MM1000WW B58
O OL200BK G132
OL200GY G132
OL200SS G132
OL210AG F113
OL211AG F114
OL212AG F115
OL214AG F112
OL400BK F108
OL400WH F108
OL405BK F110
OL405WH F110
OL410BK F108
OL410WH F108
OL415BK F110
OL415WH F110
OL420BK F108
OL420WH F108
OL425BK F110
OL425WH F110
OL610BK G126
OL610GY G126
OL615BK G127
OL615GY G127
OL622BK G128
OL622GY G128
OL625BK G129
OL625GY G129
OL640BK G130
OL640GY G130
OL644BK G131
OL644GY G131
OL650BK G124
OL650GY G124
OL655BK G125
OL655GY G125
OVLA1001W4 J172
OVLA1002C4 J172
OVLA1003W5D J173
OVLA1004C5D J173
OVLA7001W2 J174
OVLA9001C3 J175
P PS005AL D74
PS010AL D75
PS015AL D76
PS020AL D77
PS025AL D78
PS030AL D79
S SP020BK G132
SP020GY G132
SP020SS G132
SP030 J176
SP130 J176
SP200 J176
SP202 F98
SP210 J176
SP250 J176
SP1016 I163
SP4120CH A24
SP4120SC A24
SP4120WH A24
T TR060 J177
TR301 J177
W WA4135 H152
WA4147 H153
WA4235 H152
WA4247 H153
MAR8940/6
Southern Ireland
18 Corrig Road, Sandyford, Dublin D18 WV79, Ireland
T: +353 (1) 2811 122F: +353 (1) 2811 224E: [email protected]
www.clicklitehouse.ie
United Kingdom
Scolmore Park, Landsberg,
Tamworth, Staffordshire B79 7XB United Kingdom
T: +44 (0)1827 63454 F: +44 (0)1827 63362 E: [email protected]
www.scolmore.com