lifting equipment
TRANSCRIPT
48 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
JACKSLifting Equipment
Available via Outside Buy/EPO Call 1-877-298-6651 for Ordering Instructions
• Min. Height: 15-3/4"
• Max. Height: 24-3/8"
6 Ton Jack Stands (Pair) SKU 757050 99 99 24853
2-1/2 Ton Hydraulic Floor JackSKU 606587 89 9924835• Min. Height: 3-1/2"• Max. Height: 14"• Weight: 30 Lb.• Length: 22"
3-1/4 Ton Low-Profile JackSKU 757109 319 9924837
2 Ton Low-Profile JackSKU 757041 329 9924838
3.5"LOW
PROFILE COMPACTDESIGN
• Min. Height: 12" • Max. Height: 17-3/4"
Jack Stands 3 Ton (Pair)24852
Offer Good Through December 31, 2021
With Purchase of: 24837 or 24838
VALUE: $59.99BONUSBONUSVDP ORDERS
ONLY
22 Ton Heavy Duty Axle Stands (Pair)SKU 757098 2749924854• Min. Height: 12-1/4" • Max. Height: 19-3/4" • Adjustable Pin Design • Features Handle for
Transport and Positioning • Large V-shaped Saddles
Center Lift Points for Secure Placement
3 Ton Jack and Jack StandsSKU OUTSIDE BUY/EPO 244 9924792• Dual Pump Design for Quicker Lifting• Includes Two 3 Ton Jack Stands• Meets ASME 2014 Standards• Min. Height: 4.75"• Max Height: 18.5"• Weight: 67 Lb.• Length: 23"
PADDEDHANDLE
LONGREACH
3"LOW
PROFILE
3.5"LOW
PROFILE
PADDEDHANDLE
2-1/2 Ton Low-Profile JackSKU 1089029 234 9924791• Dual Pump Pistons for a
Quick Lift Design• Meets ASME 2014 Standards• Min. Height: 3"• Max. Height: 20"• Weight: 69 Lb.• Length: 26"
PADDEDHANDLE
3"LOW
PROFILE PADDEDHANDLE
Vehicle Not Included
3-1/2 Ton Floor JackSKU 746260 209 9924836• Dual Pump Design for Quicker Lifting • Features a Foot Pedal That Quickly Lifts Pad
for Faster Setup • Meets ANSI 2014 Standards • Min. Height: 5-3/4" • Max. Height: 19-3/4"• Weight: 71 Lb.• Length: 25"
• Meets ASME 2014 Standards
• Min. Height: 3"• Max. Height: 24"• Weight: 106 Lb.• Length: 32"
• Dual Pump Design for Quicker Lifting
• Meets ASME 2014 Standards
• Min. Height: 3-1/2"• Max. Height: 19-1/2"• Weight: 88 Lb.• Length: 25.75"
PADDEDHANDLE
All OEMTOOLS® Jacks on this page include Overload and Bypass Safety Valves which prevent use beyond the rated capacity and pump damage.
2 Ton Aluminum Service Jack (XD)SKU 1125867 329 99 KTI63092• Low Profile with Lifting Range
3-1/4" to 18-1/2"• Built-in Valve• Heavy-duty• Lightweight• Covered By a
2 Year Warranty• Weight: 42 Lb.
Floor Jacks
2 Ton Low Rider Floor JackSKU 1053955 339 99AFF202T• Super Low Pickup Height of 2-3/4" Offers Ideal
Access to Custom Vehicles• Twin Hydraulic System Maximizes Speed and
Provides Additional Strength• Universal Joint Technology and Precision Release
Valve Offers a More Controlled Release• Tough UV Coated Frame for Greater
Protection and Durability• Pinned Steel Saddle with Rubber
Pad for Added Vehicle Protection• One Piece Foam Covered
50" Handle• Constructed with Safety
Valve to Prevent Overloading
2-1/2 Ton Hydraulic Service JackSKU 979068 299 99ATD7333B• Extra-wide Wheels and Solid
Stance for Stability • Metered Release System for Precise
Load Control• Jack Size: 27.72" (L) x 13.15" (W) x 5.95" (H)• Shipping Weight: 69.5 Lb.• ANSI/ASME PASE 2014 Certified• Max. Height: 19.3"• Min. Height: 3.35"
3 Ton Heavy Duty Professional Floor JackSKU OUTSIDE BUY/EPO 379 99AFF300T• Low Pick Up Height of 3.75"• Twin Hydraulic System Maximizes Speed
and Provides Additional Strength• Universal Joint Technology and
Precision Release Valve Offers a More Controlled Release
• Pinned Steel Saddle (1-1/8" Stud) with Rubber Pad for Added Vehicle Protection
• Constructed with Safety Valve to Prevent Overloading
4 Ton Heavy Duty Floor JackSKU 954207 349 99AFF400SS• High Grade U-cup Seals and High
Pressure Plunger for Maximum Performance
• Heavy Duty Pump, Ram, and Cylinders are Precision Machined and Inspected
• Universal Joint Technology• Rear Mounted Swivel Casters • Pinned and Padded Saddle • Twin Hydraulic System• Flanged Side Plates• Meets ASME 2014
Standards
Available via Outside Buy/EPO Call 1-877-298-6651 for Ordering Instructions
Price Does Not Include Shipping. Call Us for Delivered Pricing, 1-877-AZTOOL1.
22 Ton Air Hydraulic Truck JackSKU 544796 519 99 24851 • Compact, Low Profile Design
Easily and Safely Fits Between Wheels of Tandem Axle Vehicles
• Ram Travel: 4-3/4"• Extension Screw
Adjustment: 4-1/2"• Min. Height: 8-1/2"• Max. Height: 17-3/4"
20 Ton Air Hydraulic Bottle JackSKU 544795 189 9924850 • Can Be Operated with Air
or Manually• Height: 9.5" to 15.5"• Extension Screw
Adjustment: 3.25"
Air Hydraulic Jacks 22 Ton Air Hydraulic Axle JackSKU 954185 679 99 AFF565E
• Pump, Ram, and Cylinders are Precision Machined and Inspected
• Unique Motor Design Advances Ram to Load Faster • Air Assisted Lowering and Dual Return Springs
Provide Controlled and Easy Descent• Safety Overload System Prevents Jack from
Being Used Beyond its Rated Capacity• Includes 3 Heat-treated Extensions for a Wide Range of Lifting
Options• Corrosion Resistant Aluminum and Nylon Composite Air Motor• Large Rear Wheels for Easy Positioning and Smooth Motion• Operates at 90 to 180 psi
$
JACKS & HYDRAULICS
49Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
800 Lb. Low-Profile Transmission JackSKU 544789 389 9924843 • Lift Range: 8-1/4" to 30-1/2"
• Meets ANSI 2014 Standards• Fully Adjustable Saddle
Adapts to Most Transmission Pans
• Swivel Saddle Adjusts Both Directions
• 4 Swivel Ball Bearing Casters for Ease of Mobility
1 Ton 2 Stage Telescoping Transmission Jack SKU 1142678 649 99 26842 • Second Stage Capacity: 2,000 Lb.• Lowered Height: 37.5"• Raised Height: 76"• 4 Way Adjustable
Saddle• Internal Shaft
Retention to Prevent Leaks and Dirt Intrusion
76" REACH
71" REACH
1 Ton Telescoping Transjak™ Transmission JackSKU OUTSIDE BUY/EPO RANRTJ1
719 99
• Capacity First Stage: 2,000 Lb.
• Capacity Second Stage: 1,000 Lb.
• Lowered Height: 37"• Raised Height: 71"
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
1-1/2 Ton Telescoping Transmission Jack SKU OUTSIDE BUY/EPO RANRTJ3000
829 99
• Capacity First Stage: 3,000 Lb.
• Capacity Second Stage: 2,000 Lb.
• Lowered Height: 35-1/2"• Raised Height: 71-1/2"
71-1/2" REACH
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
1,100 Lb. Capacity Transmission JackSKU OUTSIDE BUY/EPO RANRTJ1100
399 99
• Lifting Capacity: 1,100 Lb.
• Lowered Height: 45"• Raised Height: 72"
72" REACH
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Fuel Tank AdapterSKU OUTSIDE BUY/EPODOWJDI-FTA7
189 99
• Safe and Convenient Adapter for Handling Vehicle Fuel Tanks
• Works with Most Transmission Jacks
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
The Professional Choice for Safe Fuel Tank Removal and Fuel Pump Service. Mounts Easily on Most Transmission Jacks.
1,000 Lb. ATJ-1000H Automotive Transmission Jack - High RiseSKU OUTSIDE BUY/EPOMSSATJ1000
2,19999
• Designed with 2 Stages, Air and Hydraulic, for Precise Control
• Capacity 1,000 Lb. (454 kg)• Includes 4 Quick Ratcheting Head
Plate Brackets• Many Different Optional
Adapters Available• Height 34.5" (88 cm) to
72" (183 cm)
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
72" REACH
1,000 Lb. Telescopic Transmission Jack SKU 544786 24499 24840 • Load Capacity: 1,000 Lb.• Lowered Height: 51"• Raised Height: 70"• 2 Way Adjustable Saddle• Heavy Duty Ram
with Controlled Release Feature 70"
REACH
1,100 Lb. High Lift Transmission Jack with Foot Pump SKU 750006 399 99 24844 • Load Capacity:
1,100 Lb.• Lowered Height: 47"• Raised Height: 77"• 4 Way Adjustable
Saddle• Spring-loaded Release
Valve Stops Lowering When You Let Go
77" REACH
Wheel DolliesHydraulic Vehicle Position Jack SetSKU 298098 369 9924855TWO • 1,500 Lb. Capacity Each• Raise Vehicle in Seconds
with Foot Pump• Easily Roll Vehicle in any
Direction• Includes: 2 Jacks
Vehicle Position Jack Dolly Storage RackSKU 544800 8499 24856• Neatly Secure and
Store Up to 4 Vehicle Car Dolly Jacks
1,000 Lb. Capacity Vehicle DolliesSKU 757086 11499 24857 • 1,000 Lb. Capacity• Heavy Duty Swivel
Casters for Easy Movement
• Durable Steel Construction• Features Rails
on Each Side for Easy Transport
• Sold in Pairs
Set of 4 Hydraulic Vehicle Position Dollies with Storage CradleSKU 696485 68986
769 99
• Includes: 4 Dollies with Storage Stand
78" REACH
1,100 Lb. Manual Transmission JackSKU 954229 849 99AFF3052• 2 Stage Telescopic Ram Designed
for Medium Truck Transmissions, Transfer Cases, and Differentials
• Chrome Plated Pump Core and Piston Rod Reduces Friction and Provides Long Service Life
• Powder Coat Finish Provides Resistance to Corrosion, Chemicals and Scratches
• Adjustable Saddle with Corner Bracket and Safety Chain
• Double Pump Hydraulic System for Quick Lift Operation
• Adheres to ASME 2014
Transmission Jacks1,000 Lb. 2 Stage Telescoping Transmission JackSKU 1089028 659 9924790• Second Stage
Capacity: 1,000 Lb.• Lowered Height: 37"• Raised Height: 76.4"• 4 Way Adjustable
Saddle• Fast Lifting Pump
76" REACH
Foot Pedal Pump and Release for Hands-free Operation
Foot Pedal Pump and Release for Hands-free Operation
Foot Pedal Pump and Release for Hands-free Operation
Set of 4 Mechanical Vehicle Position Dollies with Storage CradleSKU OUTSIDE BUY/EPO 699 99 69000 • Includes: 4 Dollies with
Storage Stand
SAVE OVER $54 SAVE OVER $44 ($744.97 When Purchased Separately)($824.97 When Purchased Separately)
1,100 Lb. Air Assist Transmission JackSKU 954225 899 99AFF3052A
1,000 Lb. Single Stage Transmission JackSKU 1137814 KTI63502A
549 99
• Lift Range: 43.625" to 71"
• Double Speed Pump
71" REACH
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Mechanical Vehicle Position Jack SetSKU 1089031 329 99 24793 • Heavy Duty Swivel Casters with Needle
Bearing for Effortless Movement• Raise Vehicle in Seconds with Foot Pump• Side Handle Allows for Easy Carrying of the Jack• Includes: 2 Jacks
Vehicle Not Included
50 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
2 Ton Underhoist Tripod Jack StandSKU 757084 24849
149 99
• Adjustment Pin Securely Supports Load in 5 Positions
• Min. Height: 50-1/2"
• Max. Height: 85-3/8"
1,500 Lb. High Reach Jack StandSKU 757043 24848
134 99
• Min. Height: 55"• Max. Height: 78"
2 Ton High Tripod Jack StandSKU OUTSIDE BUY/EPO RANRJS2TH
139 99
• Perfect for Holding Drive Train or Exhaust Components in Position
• Min. Height: 55"• Max. Height: 87"
High Reach Stands
1,500 Lb. High Reach Jack Stand with Foot PedalSKU 757078 24847
16499
• Foot Pedal Pump Saves Time Adjusting Load
• Min. Height: 55"• Max. Height: 78"
1,650 Lb. Foot Operated High Reach Jack StandSKU OUTSIDE BUY/EPO RANRJS1TF
149 99
• 12" Base Dimensions• Min. Height: 54-1/2" • Max. Height: 80-1/2"
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
• Provides Added Support During Installation/Removal of Automotive Components • Compact Design for Use in Limited Workspaces • Durable Heavy Gauge Steel Construction
Engine Lift Accessory
Bed Lifter SKU OUTSIDE BUY/EPO 24499STK35885 • Designed to Lift Truck Beds Safely and Easily• Lifting Brackets Adjusts to Evenly Distribute Weight
Available via Outside Buy/EPO Call 1-877-298-6651 for Ordering Instructions
2 Ton Folding Shop Crane SKU OUTSIDE BUY/EPO 529 99RANRSC2TF • Heavy Duty Hydraulic
Folding Engine Hoist with 2 Ton Capacity Ram is Perfect for Shops That Have Limited Space But Still Need the Pure Lifting Convenience of a Crane
• Front Casters Include a Safety Brake to Prevent Movement
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
750 Lb. Engine StandSKU 462492 89 99 24828• Easy to Move and Rotate • Heavy Gauge Square Steel Tube Frame • 360º Rotation • Lock Pin Locks Engine Into Position
1 Ton Folding Engine StandSKU 544804 219 99 24834 • Folds Upright to Conserve Valuable Floor Space• Sturdy, Wide Base Design to Prevent Tipping
Under Load• Slotted Adjustable Saddle Permits Quick and
Easy Installation• Head Swivels 360° to Easily Position Engine
1,250 Lb. Engine StandSKU 462493 189 99 24829• Easy to Move and Rotate• Heavy Gauge Square Steel Tube Frame• Extra Wide 4 Wheel Base Provides
Added Stability• 360º Rotation• Lock Pin Locks Engine into Position• Includes
Tool Tray
Color May Vary
3/4 Ton Engine Leveler24831
3/4 Ton Engine Leveler24831
VALUE: $54.99BONUSBONUS
VALUE: $54.99BONUSBONUS
Engine Stands
With Purchase of: 24798
With Purchase of: 24830
Offer Good Through December 31, 2021
Offer Good Through December 31, 2021
VDP ORDERS ONLY
VDP ORDERS ONLY
2,500 Lb. Power Train Lift SKU OUTSIDE BUY/EPO AFF3182
4,899 99
• Air Assist Foot Pump with 9' Extension Provides Hands-free Operation
• Safety Latches at 30%, 50%, and 80% of Max. Height
• 8" Diameter Swivel Casters for Easy Maneuverability
• Rear Wheels Can Be Locked to Prevent Rolling
• Table Top Height from 33" to 77"
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Chain Hoist
3/4 Ton JLP-A Series Lever HoistSKU OUTSIDE BUY/EPO 28999JPW287301• Two-step, No Load, Free Chaining System• Weston Style Double Ratchet Pawl Brake• Brake Wear Indicator• Grade 80 Black Oxide Chain• Complies with ANSI / ASME B30.21 and HST-3 Standards• 10 Ft. Lift, 1 Fall
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
2 Ton Scissor Jack SKU 1125875 32 99 24799 • 2 Ton Maximum Load Capacity• Operating Height:
4" to 16.5"
Scissor Jack
3 Point Engine Support Bar SKU 133617 109 9924951 • Makes Removal of Transaxle Easy by
Supporting Engine of Front Wheel Drive Vehicles• Width Expands from 34-1/2" to 61"• (2) 14" Adjustable Hook Screws• (2) 38" Braided Steel Cables• 700 Lb. Capacity
Engine Supports
Jack Accessories
Floor Jack CrossbeamSKU 1089046 999924794• Compatible with OEMTOOLS® 24791,
24792 and 24799 Jacks• Saddles Adjust from 23" to 36" on Center• Weight Capacity: 4,000 Lb.
5,500 Lb. Pallet JackSKU 954216 499 99SUN6500PJ• Spring-loaded Loop Handle and
3-function Handle Control for Easy Use• Heavy Duty Hydraulic Pump
Allows Painless Lifting• Fork Length: 48"• Overall Fork Width: 27"• Min. Fork Height: 3"• Max. Fork
Height: 7.5"
6,000 Lb. Heavy Duty Engine CraneSKU OUTSIDE BUY/EPO 1,049 99AFF3584• Reinforced Leg Assemblies for Added
Strength and Durability • 4 Different Boom Settings: 3, 2, 1.5 and 1 Ton • Rear of Crane: 61.5" Tall
and 33" Wide • Distance
Between Front of Legs: Retracted 23", Extended 28.5"
• Built-in Safety Overload to Protect the Unit from Being Used Beyond its Rated Capacity
1,100 Lb. Rotating Engine StandSKU 1125862 389 99 24798 • Adjustable Mounting Arms to Fit Most
Engine Configurations• Locking Head Plate with 360º Engine Rotation• Heavy Duty Worm Gear for Effortless Rotation• Tubular Steel Construction• Folding Legs for Easy Storage• Base: 41-1/4" (L) x 27-1/8" (W)• Weight:
102.5 Lb.
Shop Cranes and Accessories
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
2 Ton Folding Shop Crane SKU 544801 4749924830• Foldable Design Makes for
Convenient, Easy Storage• 6 Solid Steel Caster Wheels
Add Mobility• Fully Adjustable 4 Position Boom
JACKS & HYDRAULICS