lifting clamps - interlift

LIFTING CLAMPS

Quality Clamps you Can trust

3Specifications are subject to change

Co

nten

t

Vertical Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TS / TSE / STS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 TSMP / TSEMP / STSMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TSU / TSEU / STSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TSEU-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TS-R / TSE-R / TSU-R / TSEU-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TSHP / TSHP-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 TSHPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 TCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TJP / TJPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Horizontal Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 FHX / FHSX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 TDH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 THSK / FHX-V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Non-Marking Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 TNMK / STNMK / TNMK-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 TNMH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 TBLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Beam lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 FBK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 TOBK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 FSV / FSVS / FSVSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Screw Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 TSCC / TSCC-W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 TBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Drum Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 TVK / TVKH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 TVSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Pipe Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 TPH / TPH-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 TBC / TBC-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 TTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Special Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Hardox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Stelcon / TRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Spare Parts Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

terrier lifting ClampsQuality Clamps you Can trust

Terrier Lifting Clamps & Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Years Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Safe Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

terrier lifting Clamps product range

4 www.terrierclamps.com

ter

rie

r l

ifti

ng

Cla

mps terrier lifting Clamps and equipment – Quality Clamps you Can trust

For more than 30 years Terrier is a worldwide known brand which stands for high quality lifting solutions and service. Terrier Lifting Clamps BV has six main values we stand for.

absolute safety Terrier Lifting Clamps BV believes absolute safety and safe lifting is our number one priority. All our lifting clamps are tested on up to 2 times the Working Load Limit (WLL). Terrier lifting clamps are designed on a break factor of even 5 times the WLL. Each clamp has red signal colouring on the lifting eye and locking lever for extra safety and is supplied with a test certificate. When using Terrier clamps please make sure to read our safety instructions in the “Safe Lifting” section on page 6 and 7 and the supplied user manual.

guaranteed tough Quality made in Holland Terrier tough quality lifting clamps guarantee a high performance and a long operational life. They are maintenance-friendly and have “heavy duty” welded shell bodies. The lightweight and streamlined design make them easier to handle. Terrier lifting clamps meet all standards and requirements like: European Norm NEN 13155, American Norm ASME B30.20-2010, Australian Norm 4991 and European Machine Directive 2006/42/EC.

fast and flexible Delivery and serviceTerrier Lifting Clamps BV guarantees fast and flexible delivery of standard and even special lifting products. Terrier Lifting Clamps BV offers rapid, skilled and professional sales service and after-sales spare parts service. Next to this Terrier Lifting Clamps BV offers specific technical, sales and or instruction trainings upon request and given where needed.

modern production, innovation and technical Know-how Terrier lifting clamps has a strong focus on innovation. We can help you with almost every special made clamp or lifting product. The production facilities for the production of Terrier lifting clamps is equipped with very modern machineries for efficient production on a constant high quality level. Engineering and technical know-how is on the highest level according to the latest industry standards and demands.

30 years Worldwide experienceThe Terrier Lifting Clamps BV team has more than 30 years of sales experience on a global level and has a highly experienced engineering and technical team. Terrier Lifting Clamps BV relies on and works with a strong and professional worldwide distributor network which ensures that the expected quality and service is guaranteed. Terrier Lifting Clamps BV is ISO 9001-2008 certified.

professional and personal Contact Terrier Lifting Clamps BV is proud of her no-nonsense personal and professional contact and makes sure you will always get the highest service expected. You can find us through a Terrier distributor, call us or check our website.


5 yea

rs W

ar

ra

nty

5 years Warranty - tough Quality guaranteedTerrier Lifting Clamps BV provides a 5 year extended warranty on its lifting clamps. The standard warranty is 1 year. This extended warranty is applicable to the original end user of the lifting clamps, only if the clamp has been inspected, checked and maintained by our instructions and by an official dealer. The extended warranty period of 5 years is valid from the date of purchase, and is liable to all conditions and terms stated in this document. product trackingProduct model type, serial number, working load limit (WLL), jaw opening, CE mark and year of fabrication are permanently stamped on the body. Company name, logo and website address is communicated with a sticker. For the US a special ASME BTH-1 design category and service class sticker is added. Model, serial and order number, working load limit (WLL), jaw opening and testing date are included on the test certificate. A product manual with inspection schedule is delivered with every product.

Conditions This extended warranty covers failures in the lifting clamp which are the consequences of production errors which occur during normal use. The warranty does not cover wear to components such as pivots, cam assemblies, lock springs, etc. Should there be failure within this guarantee period, the lifting clamp will be replaced or repaired. Please check the product manual for extra warranty coverage info.

The producer is not responsible for incidental damage or damage due to wrong use of the lifting clamp as well as from violation of the guarantee manual.

safety inspection procedure All inspections and repairs must be written down in the maintenance diagram/log. The clamp must be inspected prior to usage. When the clamp is returned for maintenance inspection you must always provide the maintenance diagram/log.

Defective lifting Clamps When wear or damage is indicated, the following steps need to be taken immediately:1. TAKE THE LIFTING CLAMP OUT OF USE2. If failure is in question please note the date of failure of the lifting clamp. Try to recover the cause of the failure, for example,

overload; wrong and/or carelessly use; not following procedures and measures; hoisting differing material other then indicated on clamp or stated in the user-manual; adapting and/or modifying of the Terrier clamp. These claims do not fall under the guarantee! To guarantee the safety of you and your colleagues, you are obligated to follow this procedure

3. Return your lifting clamp (with the maintenance history) to your authorised Terrier distributor. 4. If the lifting clamp has been revised / repaired by your distributor, you can safely use your clamp again. Please note this date in your

maintenance chart (product manual).

CERTIFICATE

REKNOWN DISTRIBUTOR & REVISION CENTRE FOR:

TERRIER LIFTING CLAMPS ACKNOWLEGED FROM TERRIER LIFTING CLAMPS TO:

Date 01-01-2015 Signature -

Signature - Willem Slaakweg / Terrier Lifting Clamps BV Date 01-01-2015 Valid till :

31-12-2016

Distributor


safe

lif

tin

g absolute safety Your safety and safe lifting is our number one priority. Make sure to read the below safe lifting instructions before using Terrier lifting clamps.Each product sheet gives extra information on safe lifting and specific application.

• always first read the manual before using a clamp for operating, application, safety, maintenance, inspection and warranty instructions

• Lifting clamps are suitable for usage in normal atmospheric conditions (-40°C up to +100°C) unless stated otherwise• Never overload a clamp and prevent the jerking of loads• When loading always use the whole jaw depth• Never lift more than one plate at the same time• Always keep your distance during lifting and descending of a load• Prevent situations that anybody is under the load• Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp

safe Vertical lifting


safe liftin

g

safe Horizontal lifting

VertiCal lifting


Ver

tiCa

l lifting

TS / TSE / STSHeavy duty lightweight vertical lifting clamp

application: • For vertical lifting, transporting and turning of all steel plates and structures• Jaw openings available from: 0 to 150 mm• TSE/STS types are supplied with enlarged jaw-opening• Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request)• Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Always equipped with a safety mechanism, ensuring the clamp does not slip when

lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Maintenance-friendly, easy to exchange parts which are available upon request

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) s t u V W X y (kg/pc)

850000 0 .75 TS 750 0 - 13 47 30 202 100 37 37 10 1,7850880 1 TSE 1000 0 - 25 56 45 263 141 37 47 15 3,5850901 2 TSE * 2000 0 - 35 78 64 336 183 56 56 16 7850331 3 TSE * 3000 0 - 35 78 64 336 183 56 56 16 7850441 4 .5 TS 4500 0 - 25 85 70 423 203 60 77 20 15850451 4 .5 TSE 4500 0 - 45 85 70 425 228 60 78 20 16850301 6 TS 6000 0 - 32 114 75 490 225 78 78 20 19851411 6 TSE 6000 0 - 50 114 75 490 259 82 78 20 21850401 7 .5 TS 7500 0 - 40 111 75 530 246 76 82 20 24851501 7 .5 TSE 7500 0 - 55 111 75 522 267 70 86 20 26851551 9 TS 9000 0 - 55 111 75 522 267 70 86 20 27850501 12 TS 12000 0 - 52 148 85 617 295 100 94 44 37915000 15 TS 15000 0 - 76 209 86 810 373 136 106 49 70917000 17 TS 17000 0 - 76 209 86 810 373 136 106 49 71920000 20 TS 20000 0 - 80 250 100 933 563 153 140 66 149925000 25 TS 25000 5 - 85 250 100 925 563 148 140 66 149930000 30 TS 30000 10 - 90 250 100 918 568 153 142 66 155,5

852200 6 STS 6000 40 - 90 114 75 486 275 70 78 20 21854300 7 .5 STS 7500 50 -100 111 75 524 312 70 86 20 26,5853305 9 STS 9000 50 -100 111 75 522 312 70 86 20 27,5852401 12 STS 12000 50 -100 152 85 615 344 100 94 44 41921500 15 STS 15000 80 -150 224 86 800 450 136 106 49 76922000 20 STS 20000 80 -150 249 100 924 640 153 140 66 160922500 25 STS 25000 80 -150 249 100 924 640 153 140 66 160923000 30 STS 30000 80 -150 249 100 906 645 156 142 66 165,5

* Available with a remote control

T

RW

S

Y

X

U

V

50% 50%

100%

90° 90°

0°

45°45°

0°max.

15°max.

15°


TSMP / TSEMP / STSMPthree way articulated linkage arrangement for flexible lifting and extended reach

application: • For vertical lifting, transporting and turning of all steel plates and structures• Jaw openings available from: 0 to 100 mm• TSEMP / STSMP types are supplied with enlarged jaw opening• Working load limit (WLL) 750 - 9000kg (Higher WLL available upon request)• Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• With three way articulated linkage arrangement lifting shackle • Enjoy all the benefits of the TS clamps with extra reach and lifting flexibility • When attached to a fixed load bearing arm (e .g . spreader bar) the clamp will retain its

flexibility and no chain is needed• Due to length of the three way linkage arrangement the clamp can be lowered further

between standing plates or structures• Always equipped with a safety mechanism, ensuring the clamp does not slip when

lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon request

Ver

tiC

al

lift

ing


850010 0 .75 TSMP 750 0 - 13 47 30 307 100 37 37 10 2850818 1 TSEMP 1000 0 - 25 56 45 403 141 37 47 15 4,5850911 2 TSEMP* 2000 0 - 35 78 64 516 183 56 56 16 8850221 3 TSEMP* 3000 0 - 35 78 64 516 183 56 56 16 8851401 4 .5 TSEMP 4500 0 - 45 85 70 650 228 60 78 20 19850311 6 TSMP 6000 0 - 32 114 75 760 225 78 78 20 24851511 6 TSEMP 6000 0 - 50 114 75 760 259 82 78 20 25,5850411 7 .5 TSMP 7500 0 - 40 111 75 800 246 76 82 20 29851510 7 .5 TSEMP 7500 0 - 55 111 75 792 267 70 86 20 30,5851515 9 TSMP 9000 0 - 55 111 75 792 267 70 86 20 31

852210 6 STSMP 6000 40 - 90 114 75 756 275 70 78 20 26854310 7 .5 STSMP 7500 50 -100 111 75 695 312 70 86 20 31,5853315 9 STSMP 9000 50 -100 111 75 792 312 70 86 20 32,5


Y

U

X

T

S

W R

V

50% 50%90° 90°

0°

45° 45°100%


TSU / TSEU / STSUBest selling lightweight heavy duty clamp for universal lifting

application: • For vertical lifting, transporting and turning of all steel plates and structures

from all positions• Jaw openings available from: 0 to 150 mm• TSEU / STSU types are supplied with enlarged jaw opening• Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request)• Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• With articulated lifting shackle for universal lifting flexibility at various angles• The articulated lifting shackle guarantees a pressure grip in every position, even

when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below

• Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling

• Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered

• Clamp is locked in closed as well as open position• Lightweight, maintenance-friendly, heavy duty body

Ver

tiCa

l lifting


855000 0 .75 TSU 750 0 - 13 47 30 203 100 37 37 10 1,8865800 1 TSEU 1000 0 - 25 56 50 292 141 37 47 15 3,8855601 2 TSEU * 2000 0 - 35 78 70 372 183 56 56 16 8865331 3 TSEU * 3000 0 - 35 78 70 372 183 56 56 16 8865441 4 .5 TSU 4500 0 - 25 85 70 429 203 60 77 20 16865301 4,5 TSEU 4500 0 - 45 85 70 431 228 60 78 20 16,5865401 6 TSU 6000 0 - 32 114 78 528 225 78 78 32 22865411 6 TSEU 6000 0 - 50 114 78 527 259 82 78 32 24865601 7 .5 TSU 7500 0 - 40 111 78 567 246 76 82 32 27855400 7 .5 TSEU 7500 0 - 55 111 78 560 267 70 86 32 28855405 9 TSU 9000 0 - 55 111 78 560 267 70 86 32 29865901 12 TSU 12000 0 - 52 148 85 648 295 100 94 48 41955150 15 TSU 15000 0 - 76 209 85 816 373 136 106 48 73955170 17 TSU 17000 0 - 76 209 85 816 373 136 106 48 74955200 20 TSU 20000 0 - 80 250 100 948 563 153 140 71 160955250 25 TSU 25000 5 - 85 250 100 948 563 148 140 71 160955300 30 TSU 30000 10 - 90 250 100 944 568 153 142 71 167

856200 6 STSU 6000 40 - 90 114 78 523 275 70 78 32 24856300 7 .5 STSU 7500 50 -100 111 78 560 312 70 86 32 30855305 9 STSU 9000 50 -100 111 78 560 312 70 86 32 31856401 12 STSU 12000 50 -100 152 85 644 344 100 94 48 45966150 15 STSU 15000 80 -150 224 85 808 450 136 106 48 78966200 20 STSU 20000 80 -150 249 100 940 640 153 140 71 171966250 25 STSU 25000 80 -150 249 100 940 640 153 140 71 171966300 30 STSU 30000 80 -150 249 100 946 645 156 142 71 176,5


* Remote control

T

S

W R

V X

Y

U

50% 50%90° 90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45°

100%

100%


TSEU-Auniversal heavy duty clamp with adjustable extra large jaw opening

application: • For vertical lifting, transporting and turning of all steel plates and structures

from all positions • Adjustable Jaw opening from: 0 to 95 mm • 3 different jaw positions . Adjustable by steps of 30 mm• Working load limit (WLL) 3000kg . Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Only 1 clamp needed for different kind of jobs • Also the same clamp can be used if a big jaw opening is necessary• With articulated lifting shackle for universal lifting flexibility at various angles• The articulated lifting shackle guarantees a pressure grip in every position, even

when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below

• Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling

• Standard with 2 pivots for extra clamping force• Always equipped with a safety mechanism, ensuring the clamp does not slip

when lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon request


863300 3 TSEU-A 3000 0 - 95 79 70 373 183-243 51 77 16 10

Ver

tiC

al

lift

ing

T

S

W R

V X

Y

U

50% 50%90° 90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45°

T

U

X

RW

S

V

50%50% 90°90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45°

Y

100%

100%

100%

100%


TS-R / TSE-R / TSU-R / TSEU-Rspecially made for stainless steel lifting

application: • For vertical lifting, transporting and turning of stainless steel plates and structures• Jaw openings available from: 0 to 55 mm• TSE-R / TSEU-R types are supplied with enlarged jaw opening• Working load limit (WLL) 750 - 7500kg . Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Pivot and cam are made of stainless steel• Body and lock lever are nickel plated to prevent corrosion due to carbon

contamination• TSU-R / TSEU-R come with articulated lifting shackle for universal lifting flexibility

at various angles• TS-R / TSE-R come with standard lifting shackle• Always equipped with a safety mechanism, ensuring the clamp does not slip when



861075 0 .75 TS-R 750 0 - 13 47 30 202 100 37 37 10 1,7861100 1 TSE-R 1000 0 - 25 56 45 263 141 37 47 15 3,5861200 2 TSE-R 2000 0 - 35 78 64 336 183 56 56 16 7861300 3 TSE-R 3000 0 - 35 78 64 336 183 56 56 16 7861450 4 .5 TSE-R 4500 0 - 45 85 70 425 228 60 78 20 16861600 6 TSE-R 6000 0 - 50 114 75 490 259 82 78 20 21861750 7 .5 TSE-R 7500 0 - 55 111 75 522 267 70 86 20 26

862075 0 .75 TSU-R 750 0 - 13 47 30 203 100 37 37 10 1,8862100 1 TSEU-R 1000 0 - 25 56 50 292 141 37 47 15 3,8862101 2 TSU-R 2000 0 - 20 78 70 370 165 54 56 16 7862200 2 TSEU-R 2000 0 - 35 78 70 372 183 56 56 16 8862300 3 TSEU-R 3000 0 - 35 78 70 372 183 56 56 16 8862450 4,5 TSEU-R 4500 0 - 45 85 70 431 228 60 78 20 16,5862600 6 TSEU-R 6000 0 - 50 114 78 527 259 82 78 32 24862750 7 .5 TSEU-R 7500 0 - 55 111 78 560 267 70 86 32 28

Ver

tiCa

l lifting

T

S

W R

V X

Y

U

50% 50%90° 90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45°

T

U

X

RW

S

V

50%50% 90°90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45°

Y

100%

100%

100%

100%


TSHP / TSHP-A lightweight clamp with extra large jaw opening

application: • For vertical lifting, handling and transporting of Holland Profile (HP)

shipbuilding structures, steel plates and structures• Turning lathe clamp• TSHP jaw opening from 0 to 80 mm• TSHP-A adjustable jaw opening available from: 0 to 155 mm• TSHP / TSHP-A Working load limit (WLL) 1000 - 1500kg • Higher WLL available upon request . Min . WLL is 10% of max . WLL• Lifting of longer sections should be done with a spreader beamnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Also useful as a “big-jaw” opening clamp• Standard with 3 pivots for extra powerful clamping force• Easy handling of workpieces in and out of lathe due to extra small W-dimensions (see illustration)• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied

and when load is being lowered• Clamp is locked in closed as well as open position• Maintenance-friendly, easy to exchange parts which are available upon request


860110 1 TSHP 1000 0 - 80 207 70 520 257 41 68 16 19860111 1 .5 TSHP 1500 0 - 80 207 70 520 257 41 68 16 19860155 1 .5 TSHP-A 1500 0 - 155 160 70 523 256-333 62 66 16 18

Ver

tiC

al

lift

ing

W

S

V

U

T Y

X

0°max.

15°max.

15°

50% 50%

100%

90° 90°

45° 45°

0°


TSHPUlightweight Holland profile (Hp) clamp for universal lifting

application: • For vertical lifting, handling and transporting of Holland Profile (HP)

shipbuilding structures from all positions• Jaw openings available from: 0 to 45 mm• Working load limit (WLL) 3000 – 5000kg • Higher WLL available upon request . Min . WLL is 10% of max . WLL• Lifting of longer sections should be done with a spreader beamnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• With articulated lifting shackle for universal lifting flexibility at various angles• The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to

90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below

• Standard with 2 pivots for extra powerful clamping force• Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied

and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon request

Ver

tiCa

l lifting


860300 3 TSHPU 3000 0 - 35 93 70 369 182 58 54 16 8860500 5 TSHPU 5000 0 - 45 110 70 434 228 58 86 20 17,3

T

SW R

V X

Y

U

50% 50%90° 90°

0°

45° 45°

50% 50%90° 90°

0°

45° 45° 100%

100%


Ver

tiC

al

lift

ing TCK

safe and easy square tube frame lifting

application: • For vertical lifting and transporting of structures where a square tube is

used as a frame, e .g . mobile units etc . If the clamp is being loaded, the cams will pull out sideways and will grip into the sides of the square tube

• Jaw openings available from: 62 to 70 mm• Working load limit (WLL) 3000kg • Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Because of the compact design of the clamp, the clamp will not use more

space than the dimensions of the square tube • Equipped with articulated lifting shackle for extra lifting flexibility (max 30º)• Standard with 2 high grip pivots for extra powerful clamping force• Special locking devise ensuring safe and easy handling • Lightweight design for easy handling

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) u X H t y V (kg/pc)

810000 3 TCK 3000 62 - 70 449 60 200 70 16 100 6,9

V

YT

X X

U

H

Max. 30°


TJP / TJPUDesigned for (thin) sheet metal lifting without minimum Wll

application: • For vertical lifting and transporting of (thin) sheet metal• Jaw openings available from: 0 to 20 mm• Working load limit (WLL) 250 - 1000kg .• No min . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Equipped with a special pivot which will adapt itself to the load of the clamp

generating extra friction, eliminating the chance of slipping loads• TJPU comes with an articulated lifting shackle for universal lifting flexibility

at various angles• TJP comes with a standard lifting shackle• Standard equipped with a safety mechanism, ensuring the clamp does not

slip when lifting force is applied and when load is being lowered• The clamp is locked in closed as well as in open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon

request


870700 0 .25 TJP 250 0 - 13 54 30 202 113 50 37 10 1,9870710 0 .25 TJPU 250 0 - 13 54 30 202 113 50 37 10 2870800 1 TJP 1000 0 - 20 56 45 260 137 48 45 15 3,8

Ver

tiCa

l lifting

Y

U

X

T

S

W R

V

0°max.

15°max.

15°

Horizontal lifting


Ho

rizo

nta

l lifting

FHX / FHSXlightweight heavy duty clamp for horizontal lifting

application: • For horizontal lifting and transporting of steel plates and other

non-deflecting materials• Terrier FHX / FHSX lifting clamps must always be used in pairs (or

multiple pairs)• Jaw openings available from: 0 to 150 mm• FHSX types are supplied with enlarged jaw opening• Working load limit (WLL) 1000 - 25000kg per pair (Higher WLL

available upon request)

features and Benefits: • Compact design and high lifting capacity• Lightweight design for easy handling• Tough quality heavy duty welded body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W t H X u y (kg/pc)

953100 1 FHX 1000 0 - 35 140 99 10 25 11,5 65 188 15 2,6953200 2 FHX 2000 0 - 60 180 118 15 30,5 19,5 90 287 16 7953300 3 FHX 3000 0 - 60 180 118 20 30,5 19,5 90 291 16 8953400 4 FHX 4000 0 - 60 220 145 25 30,5 19,5 105 304 20 13953600 6 FHX 6000 0 - 60 220 145 25 30,5 19,5 110 307 20 14953800 8 FHX 8000 0 - 60 225 135 35 30,5 19,5 120 336 30 19953010 10 FHX 10000 0 - 60 225 135 35 30 .5 19,5 120 336 30 19953012 12 FHX 12000 0 - 60 225 135 35 30,5 19,5 120 336 30 19953015 15 FHX 15000 0 - 60 262 147 35 43 21,5 160 344 35 30953025 25 FHX 25000 0 - 60 262 147 40 43 21,5 175 349 35 33

954200 2 FHSX 2000 0 - 100 180 120 15 30,5 19,5 90 383 15 9,2954300 3 FHSX 3000 0 - 100 180 120 20 30,5 19,5 90 387 15 10954400 4 FHSX 4000 0 - 100 220 145 25 30,5 19,5 105 414 20 15954600 6 FHSX 6000 0 - 100 220 145 25 30,5 19,5 120 414 20 16,5954800 8 FHSX 8000 0 - 100 225 135 35 30,5 19,5 120 428 30 21954010 10 FHSX 10000 0 - 100 225 135 35 30,5 19,5 120 428 30 22954012 12 FHSX 12000 0 - 100 225 135 35 30,5 19,5 120 428 30 22853820 15 FHSX 15000 0 - 150 350 240 35 45 27,5 140 665 35 53

Y

T

XS

V

W

U

H 60°

90°

120°

100%75%

50%

100%15° 15°

max. max.0°


TDH lightweight heavy duty clamp for safe and easy lifting of bending sheets

application: • For horizontal lifting and transporting of sheets that will bend or

deflect when being lifted• Terrier TDH lifting clamps must always be used in pairs (or

multiple pairs)• Jaw openings available from: 0 to 50 mm• Working load limit (WLL) 1000 - 6000kg

features and Benefits: • Compact design and high lifting capacity• Lightweight design for easy handling• Tough quality heavy duty welded body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W t H X u y (kg/pc)

970100 1 TDH 1000 0 - 15 140 99 10 22,5 13,5 65 167 15 2,5970200 2 TDH 2000 0 - 35 180 114 20 26 14 90 233 15 8970400 4 TDH 4000 0 - 50 235 129 30 40 25 130 304 20 18970600 6 TDH 6000 0 - 50 235 129 30 40 25 130 304 20 18

Ho

riz

on

tal

lift

ing

TH

U

V

XW

S

60° 100%

15°max.

15°max.

0°

100%0°

Y


Ho

rizo

nta

l lifting

THSKadjustable extra large jaw opening for stacks, packages and thick single plate lifting

application: • For horizontal lifting, handling and transporting of banded/secured stacks,

packages and or single thick steel plates• Terrier THSK lifting clamps must always be used in pairs (or multiple pairs)• Adjustable jaw offers wide variety of openings available from 3 to 420 mm• Working load limit (WLL) 1500 - 9000kg per pair

features and Benefits: • Easy adjustable jaw opening• Quick and easy placing and removing of

the clamp• Lightweight design for easy handling• Tough quality heavy duty welded body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W t H u X z y (kg/pc)

815180 1 .5 THSK/180 1500 3 -180 201 135 15 30,5 18 289 90 60 20 9,5815300 1 .5 THSK/300 1500 3 -300 201 135 15 30,5 18 409 90 60 20 11830180 3 THSK/180 3000 3 -180 241 165 20 30,5 18 296 105 69 20 13830300 3 THSK/300 3000 3 -300 241 165 20 30,5 18 416 105 69 20 15845180 4 .5 THSK/180 4500 3 -180 241 165 20 30,5 18 296 105 69 20 13845420 4 .5 THSK/420 4500 3 -420 241 165 20 30,5 18 536 105 69 20 17860180 6 THSK/180 6000 3 -180 256 160 25 30,5 18 304 120 75 20 18860420 6 THSK/420 6000 3 -420 256 160 25 30,5 18 544 120 75 20 24890180 9 THSK/180 9000 3 -180 256 160 25 30,5 18 304 120 75 20 18890420 9 THSK/420 9000 3 -420 256 160 25 30,5 18 544 120 75 20 24

FHX-Vuser-friendly horizontal clamp where the torsion spring ensures that the clamp stays in position after is has been set in place

application: • For horizontal lifting and transporting of steel plates and other non-deflecting

materials• Terrier FHX-V lifting clamps must always be used in pairs (or multiple pairs)• Jaw openings available from: 0 to 60 mm• Working load limit (WLL) 1000 - 6000kg

features and Benefits:• Pre-tensioned spring cam feature for easy single

operator usage• Clamp can be closed and fixed on any desired spot• Compact and lightweight design for easy handling• Tough quality heavy duty welded body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W t H u X y (kg/pc)

953101 1 FHX-V 1000 0 - 35 140 99 10 26,5 12 188 85 15 3953201 2 FHX-V 2000 0 - 60 180 114 15 30,5 19 286 125 16 8953301 3 FHX-V 3000 0 - 60 200 125 20 30,5 19 302 140 20 12,2953401 4 FHX-V 4000 0 - 60 220 139 30 30,5 19 316 165 20 17953601 6 FHX-V 6000 0 - 60 220 139 30 30,5 19 316 165 20 17

S

V

TH

X

U

Y

60°

90°

120°

0° 15° 15°max. max.

100%100%

75%

50%

W

60°

90°

120°

100%75%

50%

0°

100%15° 15°

max. max.Y

Z

T

XS

V

W

U

H

non-marKing lifting


no

n-m

ar

Kin

g liftin

gTNMK / STNMK / TNMK-AVertical lifting without marking, scratching or damaging the material surface without minimum Wll

application: • For vertical lifting, transporting and turning of all plates and structures without

marking, scratching and or damaging the material surface• Perfect for lifting materials such as (stainless) steel, aluminum, nature stone,

composite, painted materials, wood, glass, plastic, etc .• Jaw openings available from: 0 to 60 mm• STNMK types are supplied with enlarged jaw opening: 17 to 37 mm• TNMK-A types are supplied with adjustable extra large jaw opening: 0 to 180 mm (A)

(adjustable steps of 20 mm)• Working load limit (WLL) 500 - 3000kg .• No min . WLL

features and Benefits:• With 2 special synthetic anti-friction pads to guarantee non-marking• Supplied with chain lifting shackle for flexible lifting• Always equipped with a safety mechanism, ensuring the clamp does not slip when

lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight, maintenance-friendly, heavy duty body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) H s t u V W X y (kg/pc)

862035 0 .5 TNMK 500 0 - 20 205 102 40 462 224 48 80 14 6862135 0 .5 STNMK 500 17 - 37 205 102 40 462 241 48 80 14 6862005 0 .5 TNMK-A 500 0 -180 242 143 40 410 235-395 61 80 14 10862010 1 TNMK 1000 0 - 30 232 105 40 470 282 46 80 14 6,5862037 1 .5 TNMK 1500 0 - 40 232 105 40 470 282 46 80 14 6,5862038 2 TNMK 2000 0 - 50 362 124 50 704 408 63 80 18 15862039 3 TNMK 3000 0 - 60 362 124 50 704 408 63 80 18 15,5

0°max.

15°max.

15°

U

H

S

W R

V X

100%45° 45°

0°100%

T Y

V

R

U

H

S

W

T

0°max.

15°max.

15°

100%45° 45°

0°100%

X

Y

tnmK

tnmK-a


no

n-m

ar

Kin

g l

ifti

ng TNMH

Horizontal lifting without marking, scratching or damaging the material surface

application: • For horizontal lifting and transporting of all non-deflecting plates and

structures without marking, scratching and or damaging the material surface

• Perfect for lifting materials such as (stainless) steel, aluminum, nature stone, composite, painted materials, wood, glass, plastic, etc .

• Terrier TNMH lifting clamps must always be used in pairs (or multiple pairs)

• Jaw openings available from: 0 to 50 mm• Working load limit (WLL) 1000 - 6000kg per pair

features and Benefits: • Jaw and cam are covered with a special

high quality pressure resistant fabric• Compact design and high lifting capacity• Lightweight design for easy handling• Tough quality heavy duty welded body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W t H u X y (kg/pc)

862810 1 TNMH 1000 0 - 25 140 94 15 20 10 155 65 15 2,4862820 2 TNMH 2000 0 - 45 225 151 23 30,5 15 267 90 15 7,5862830 3 TNMH 3000 0 - 45 225 151 20 30,5 15 271 90 15 8,3862841 4 TNMH 4000 0 - 50 250 161 20 30,5 17,5 300 115 30 13862861 6 TNMH 6000 0 - 50 250 161 25 30,5 17,5 306 130 30 18

15° 15°max. max.

100%

W

V

S

60°

90°

120°

0°

100%75%

50%

X

U

TH

Y


TBLCnon-marking vertical lifting of materials with parallel sides without minimum Wll

application: • For vertical lifting and transporting of all plates,

blocks and structures with parallel sides without marking, scratching and or damaging the material surface

• Perfect for lifting materials such as (stainless) steel, aluminum, nature stone, composite, painted materials, wood, glass, plastic, etc .

• The clamp is locked in the open position . To lift, the operator must activate the handle and hold it up while the lifting eye moves up . This will result in the clamp closing . When Laying down the load, the clamp automatically locks itself open

• Jaw openings available from: 30 to 500 mm• Working load limit (WLL) 500 - 3000kg .• No min . WLL

features and Benefits:• 2 special synthetic anti-friction pads to guarantee non-marking• Lightweight design and easy to use• Tough quality heavy duty body• Maintenance-friendly, easy to exchange parts which are available upon request

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) V min-max u min-max s t X y (kg/pc)

801005 0 .5 TBLC 500 30 - 110 270-325 305-460 95 45 80 (*70) 15 7801010 1 TBLC 1000 100 - 230 425-530 380 -655 120 45 80 (*70) 15 12,3801020 2 TBLC 2000 220 - 360 580 -675 410-735 140 45 80 (*70) 15 18801030 3 TBLC 3000 350 - 500 725-835 530-900 178 64 100 (*90) 16 33

no

n-m

ar

Kin

g liftin

g

0°max.

10°max.

10°100%

0°max.

10°max.

10°100%

R X

V

S

U

T Y

0°max.

10°max.

10°100%

0°max.

10°max.

10°100%

R X

V

S

U

T Y

Beam lifting


Bea

m liftin

gFBKspecial lifting clamp for handling and vertical in-position lifting of beams

application: • For vertical lifting, transportation and stacking

of steel (H) beams, profiles and structures where the load must stay perfectly in position

• Especially recommended for transportation and stacking of steel (H) beams (e .g . when sawing of steel beams, stacking of steel beams and building of steel constructions)

• Jaw openings available from: 0 to 25 mm• Working load limit (WLL) 1000 - 3000kg . Min . WLL is 10% of max . WLLnote: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb

features and Benefits:• Special lifting shackle shape which places the gravity centre of the beam or load directly beneath the

lifting shackle• While lifting the equilibrium of the beam is maintained and keeps the flanges vertical so the beam

can easily be stacked or positioned• Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is

applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon request

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) V W s H t z X u y (kg/pc)

851010 1 FBK 1000 0 - 15 136 43 45 154 35 200 47 225 15 3851000 1 .5 FBK 1500 0 - 20 170 56 67 210 60 312 56 374 16 7851100 3 FBK 3000 0 - 25 208 58 66 252 70 380 77 410 20 15

X

ZT

Y

DH

U

S

V

RW

15° 15°max. max.

100%

0°

90°

100%X

ZT

Y

DH

U

S

V

RW

15° 15°max. max.

100%

0°

90°

100%


Bea

m l

ifti

ng TOBK

easy horizontal H-beam lifting

application: • For horizontal lifting, transportation and stacking of steel (H) beams,

profiles and structures• Jaw openings available from: 3 to 20 mm• Working load limit (WLL) 2000kg

features and Benefits:• Special design makes it possible to lift steel (H) beams on the flange

as well as on the upper ends of the beam• Always equipped with a safety mechanism, ensuring the clamp does

not slip when lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available

upon request

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) V W s H t z X u y (kg/pc)

851001 2 TOBK 2000 3 - 20 192 30 64 154 64 285 65 310 15 6,8

0°max.

15°max.

15°100%

100% 60°

0°

X

U

H

V

Z

T

R

W

S


Bea

m liftin

gFSV / FSVS / FSVSUmulti purpose beam screw clamp

application: • For horizontal lifting and transportation of steel (H) beams, profiles

and structures• Can be used as upside down attached (temporary) lifting point• FSV Jaw openings available from: 75 to 450 mm• FSVS / FSVSU types are supplied with enlarged jaw opening:

75 to 560 mm• FSV Working load limit (WLL) 1000 - 10000kg . (Higher WLL available

upon request)• FSVS / FSVSU Working load limit (WLL) up to 5000kg

features and Benefits:• Special design makes it possible to lift steel (H) beams and structures• Equal opening and closing of both jaws for simple and quick assembly• Welded jaw plates for better positioning and less damaging of load • FSVSU types are supplied with reinforced body and articulated lifting

shackle• Lightweight, maintenance-friendly, heavy duty body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) s t V-max u-max H X (kg/pc)

851400 1 FSV 1000 75 - 190 30 73,5 357 345 113-192 120 5851500 2 FSV 2000 75 - 190 30 73,5 357 345 113-192 120 5851600 3 FSV 3000 75 - 190 30 73,5 357 345 113-192 120 5851700 4 FSV 4000 150 - 300 40 80 450 422 185-240 180 15851800 5 FSV 5000 150 - 300 40 80 450 422 185-240 180 15851110 10 FSV 10000 350 - 450 95 88 695 653 400-447 200 50

962000 2 FSVS 2000 75 - 420 30 73,5 540 428 114-275 120 7963000 3 FSVS 3000 75 - 420 30 73,5 540 428 114-275 120 7964000 4 FSVS 4000 150 - 560 40 80 708 545 173-362 180 18965000 5 FSVS 5000 150 - 560 40 80 708 545 173-362 180 19,5

956300 3 FSVSU 3000 75 - 420 30 73,5 540 486 114-275 120 8956400 4 FSVSU 4000 150 - 560 40 80 708 613 173-362 180 21956500 5 FSVSU 5000 150 - 560 40 80 708 622 173-362 180 22

V

S

R

H

X

U

T max. 15°

S

R

V X

H

U

50% 50%

100%

50% 50%

100%

90° 90°

0°

45°45°

90° 90°

0°

45°45°

T

fsV

fsVsu

sCreW Clamps


sCr

eW C

lam

psTSCC / TSCC-Wmulti-purpose screw clamp

application: • For vertical and horizontal lifting and transportation of a large

variety of steel structures• Can also be attached upside down and be used as a (temporary)

lifting point• Jaw openings available from: 0 to 100 mm• TSCC-W types are supplied with enlarged jaw opening• Working load limit (WLL) 500 - 6000kg .• No min . WLL

features and Benefits:• Special universal design ensures multi-purpose application of lifting

steel structures• Fitted with a moveable cam on the thread spindle which provides a

powerful clamping force on the workpiece• Equipped with a safety screw spindle mechanism, ensuring the clamp

does not slip when lifting force is applied• Lightweight design for easy handling• Tough quality heavy duty drop forged body• Forged alloy components, where required• Maintenance-friendly, easy to exchange parts which are available upon request

article nr. model Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) s i W V z u H t X (kg/pc)

900500 0 .5 TSCC 500 0 - 35 18 27,5 26 108 158 211 82 25 27 1862710 1 TSCC 1000 0 - 30 44 42 46 175 210 204 128 38 46 3,2901500 1 .5 TSCC 1500 0 - 40 29 42 40 150 220 232 140 46 46 3,5903000 3 TSCC 3000 0 - 60 38 50 46 190 280 278 184 50 60 7,8906000 6 TSCC 6000 0 -100 60 63 70 296 446 390 249 100 75 22862711 1 TSCC-W 1000 50 -100 88 42 50 225 258 273 190 45 46 6,3862731 3 TSCC-W 3000 25 - 75 76 49 60 215 250 291 191 50 54 7,8

0°max.

30°max.

30°100%

50% 50%

100%

90° 90°

45° 45°

0°

H

U

I

XV

W R

Z

S

T


TBSmulti-purpose screw clamp for Hp-profiles

application: • For use as a (temporary) lifting point in spaces with HP- (bulb)

profiles, like sectional ship parts and ship engine rooms• The moment a load is applied, the clamp is automatically fixed• Used for HP-100 to HP-240 (bulb) profiles• Working load limit (WLL) 1500 - 3000kg

features and Benefits:• Equipped with a thread spindle for easy attachment, providing a

powerful clamping force on the workpiece• Lightweight design for easy handling• Tough quality heavy duty body• Maintenance-friendly, easy to exchange parts which are available

upon request

sCr

eW C

lam

ps

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) V s t u H X y (kg/pc)

862150 1 .5 TBS 1500 HP100-240 150 74 45 180 75 40 16 2,9862400 3 TBS 3000 HP100-240 150 75 65 205 75 80 16 6

Specifications are subject to change

X

U

H

YT

S

V

15°15°max.max.

100%

0°

45°45° 100%

X

U

H

YT

S

V

15°15°max.max.

100%

0°

45°45° 100%

Drum lifting


TVKspecial lightweight heavy duty clamp for drum lifting

application: • Designed for safe lifting, handling and transporting of steel (oil) drums• Single clamp application on empty or filled sealed drums• Filled open drums should be lifted by use of two clamps with a two leg chain sling• Jaw opening available from: 0 to 17 mm• Working load limit (WLL) 500kg

features and Benefits:• With automatic locking mechanism• Lightweight design for easy handling• Tough quality heavy duty welded shell

body• Maintenance-friendly, easy to exchange

parts which are available upon request

TVKHspecial lightweight heavy duty clamp for upright drum lifting

application: • Designed for lifting, handling and transporting of (oil) drums, where the

drums have to stay in a upright position• Single clamp application on empty or filled drums • During lifting and transportation the centre of gravity of the drum is always

below the lifting point• Jaw openings available from: 0 to 25 mm• Working load limit (WLL) 600kg

features and Benefits:• Lightweight design for easy handling in tight spaces between other drums• Tough quality heavy duty welded shell body• Equipped with a manual safety lock

mechanism so that the clamp is locked in the open position

• Maintenance-friendly, easy to exchange parts which are available upon request

Dr

um

lif

tin

g

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) u V t X y (kg/pc)

828000 TVK 500 0 - 17 121 96 12 28 15 1,3

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) u s V t X y (kg/pc)

828100 TVKH 600 0 - 25 765 434 305 50 100 10 7

X

YV

U

T

V X

S

U

T Y


Dr

um

lifting

TVSHspecial lightweight heavy duty clamp for laying drum lifting

application: • Designed for lifting, handling and transporting of (oil)

drums, where the drums have to stay in a laying position• Single clamp application on empty or filled drums • During lifting and transportation the centre of gravity of

the drum is always below the lifting point• Jaw openings available from: 500 to 900 mm• Working load limit (WLL) 600kg

features and Benefits:• Lightweight design for easy handling in tight spaces between other drums• Tough quality heavy duty welded shell body• Equipped with a manual safety lock mechanism so that the clamp is locked in the open position• Maintenance-friendly, easy to exchange parts which are available upon request

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) u s V t X y (kg/pc)

828200 TVSH 600 500-900 475 230 1080 50 82 10 7

C

R

V

T MAX.15˚

S

X

Y

pipe lifting


pipe lifting

TPH / TPH-HDHeavy duty clamp with high pressure resistant plastic for horizontal pipe lifting

application: • For horizontal lifting and transporting of steel and concrete pipes

without damaging the product• TPH-HD version is specially designed for extreme heavy duty lifting

situations (eg . loading and unloading ships)• Terrier TPH lifting clamps must always be used in pairs• Jaw openings available up to 70 mm• Working load limit (WLL) 1500 - 60000kg per pair (Higher WLL

available upon request)

features and Benefits:• TPH Jaw is covered with a special high quality pressure resistant plastic• TPH-HD Jaw is covered with special high quality extreme high

pressure resistant plastic• Maintenance-friendly clamps, plastic pressure resistant cover is

easy to change• TPH-HD has special handle for easy handling• Compact design and high lifting capacity• Lightweight design for easy handling• Tough quality heavy duty body

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pair) (r) (mm) V s W u t X y (kg/pc)

960150 1 .5 TPH 1500 40 120 70 50 185 16 41 25 2960300 3 TPH 3000 40 120 70 50 185 16 41 25 2960400 4 TPH 4000 50 140 70 58 204 26 41 25 3960600 6 TPH 6000 50 140 70 58 204 26 41 25 3960800 8 TPH 8000 70 140 70 58 224 26 45 25 3,4960810 10 TPH 10000 70 140 70 58 224 26 85 45 7960812 12 TPH 12000 70 140 70 58 224 26 85 45 7960915 15 TPH 15000 70 155 70 76 250 26 100 60 9960920 20 TPH 20000 70 155 70 76 250 26 100 60 9

965050 5 TPH-HD 5000 60 271 100 85 230 26 80 20 6,7965100 10 TPH-HD 10000 60 271 100 85 230 26 80 30 9,7965200 20 TPH-HD 20000 60 291 100 105 269 36 80 35 14965300 30 TPH-HD 30000 60 309 100 115 293 43 80 40 19965600 60 TPH-HD 60000 60 309 100 115 313 62 80 60 28,5

T

UR

W

V

X

Y

S

α

R α < Max 10 - 60° = Max 10 - 90°

TPH

T Y

X

R

W

U

V

S

R α < Max 10 - 90° = Max 10 - 120°

TPH-HD

T

UR

W

V

X

Y

S

α

R α < Max 10 - 60° = Max 10 - 90°

TPH

tpH

tpH-HD


pipe

lif

tin

g TBC / TBC-Alightweight clamp with pressure resistant plastic cam for vertical concrete pipe lifting

application: • For vertical lifting and transporting of concrete pipes and wells• Terrier TBC / TBC-A lifting clamps must always be used in pairs

(or per three clamps)• TBC jaw opening available from: 60 to 120 mm• TBC-A has an extra large jaw opening available from: 50 to 220 mm

(adjustable in steps of 25 mm)• Working load limit (WLL) 1000kg • Other jaw openings available upon request

features and Benefits:• The cam is covered with a special high quality pressure resistant plastic• Maintenance-friendly clamp, plastic pressure resistant cover is easy to change• Tough quality welded body• Lightweight design for easy handling

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) u s W t X z y (kg/pc)

870101 1 TBC 1000 60 -120 326 169 97 12 60 40 12 10870105 1 TBC-A 1000 50 -220 459 262 106 12 60 40 12 15

XZ

Y

T

R W

S

U

max.

30°

100%

Z

max.

30°

100%

T

Y

R W

S

U

X


TTLlightweight clamp for horizontal lifting of tubes, pipes and solid round materials

application: • For horizontal lifting and transporting of tubes, pipes,

tube bundles, rolls and other solid round materials• The clamp is locked in the open position . To perform

lifting, the operator must activate the handle and hold it up while the force on the lifting eye is going upwards . When laying down the load, the clamp automatically locks itself open

• TTL jaw opening available from: 48,3 to 508 mm• Working load limit (WLL) 500 - 3000kg • Higher WLL or jaw openings available upon request

features and Benefits:• Lightweight design and easy to use• Tough quality body• Can be delivered with protection to avoid damaging of

the load

article nr. type Capacity Jaw opening Dimensions in mm Weight(kg/pc) (r) (mm) V min-max u min-max t X y (kg/pc)

800550 0 .5 TTL 500 48,3 - 114,3 146-207 300-400 45 47 15 4,5801011 1 TTL 1000 114,3 - 219,1 110-170 430-615 45 47 15 9802021 2 TTL 2000 219,1 - 368 490-610 670-955 64 56 16 31803036 3 TTL 3000 368 - 508 590-710 875-1165 64 56 16 39

pipe lifting

0°max.

10°max.

10°max.

60°max.

60°100%

100%

0°

T

V

U

R

X

speCial lifting


speCia

l lifting

HARDOXextra hardened pivot and cam for Hardox lifting

application: • For vertical lifting, transporting and turning of all steel plates with a hardness

of max . 50 HRC (for example Hardox 400 and 500) . Please ask for special specifications

• Check application, capacity diagrams and lifting eye variants for above types on pages 9, 10 and 11

• Jaw openings available from: 0 to 55 mm . Working load limit (WLL) 750 - 7500kg • Min . WLL is 10% of max . WLL . note: the plate surface of the material must have a hardness level of max. HrC 50/485 Hb

features and Benefits:• Equipped with an extra hardened pivot and cam • Cam is coloured green for easy identification• Always equipped with a safety mechanism, ensuring the clamp does not slip

when lifting force is applied and when load is being lowered• Clamp is locked in closed as well as open position• Lightweight design for easy handling• Tough quality heavy duty welded shell body• Maintenance-friendly, easy to exchange parts which are available upon request


850000 .5 0 .75 TS-H 750 0 - 13 47 30 202 100 37 37 10 1,7850880 .5 1 TSE-H 1000 0 - 25 56 45 263 141 37 47 15 3,5850901 .5 2 TSE-H 2000 0 - 35 78 64 336 183 56 56 16 7850331 .5 3 TSE-H 3000 0 - 35 78 64 336 183 56 56 16 7850451 .5 4 .5 TSE-H 4500 0 - 45 85 70 425 228 60 78 20 16851411 .5 6 TSE-H 6000 0 - 50 114 75 490 259 82 78 20 21851501 .5 7 .5 TSE-H 7500 0 - 55 111 75 522 267 70 86 20 26

850010 .5 0 .75 TSMP-H 750 0 - 13 47 30 307 100 37 37 10 2850818 .5 1 TSEMP-H 1000 0 - 25 56 45 403 141 37 47 15 4,5850911 .5 2 TSEMP-H 2000 0 - 35 78 64 516 183 56 56 16 8850221 .5 3 TSEMP-H 3000 0 - 35 78 64 516 183 56 56 16 8851401 .5 4 .5 TSEMP-H 4500 0 - 45 85 70 650 228 60 78 20 19850311 .5 6 TSMP-H 6000 0 - 32 114 75 760 225 78 78 20 24851510 .5 7 .5 TSEMP-H 7500 0 - 55 111 75 792 267 70 86 20 30,5

855000 .5 0 .75 TSU-H 750 0 - 13 47 30 203 100 37 37 10 1,8865800 .5 1 TSEU-H 1000 0 - 25 56 50 292 141 37 47 15 3,8855601 .5 2 TSEU-H 2000 0 - 35 78 70 372 183 56 56 16 8865331 .5 3 TSEU-H 3000 0 - 35 78 70 372 183 56 56 16 8865301 .5 4 .5 TSEU-H 4500 0 - 45 85 70 431 228 60 78 20 16,5865411 .5 6 TSEU-H 6000 0 - 50 114 78 527 259 82 78 32 24855400 .5 7 .5 TSEU-H 7500 0 - 55 111 78 560 267 70 86 32 28


spe

Cia

l li

ftin

g STELCON Heavy duty plate hooks for stelcon lifting


815000 TRC 1500 40-75 64 65 394 170 73 48 16 7

TRClightweight heavy duty clamp for horizontal rail lifting

application: • For horizontal lifting, transporting and turning of rail profiles• Jaw opening available from: 40 to 75 mm . Working load limit (WLL) 1500kg • Because of the wide range of rail profiles other profile dimensions and capacities available

upon request

features and Benefits:• With special cam for rail profiles• Always equipped with a safety mechanism, ensuring the clamp does not slip when


0°max.

10°max.

10°max.

45°max.

45°100%

100%

0°


spar

e par

ts serV

iCe

SPARE PARTS SERViCEAll spare parts are available either separately or as repair sets . Terrier spare parts sets come with a special discount . It is recommended when any parts are damaged to replace them straight away without taking any risk .

When you order spare parts always indicate the: model, lifting capacity, jaw opening and serial number of the clamp as well as the required parts.

A Cam assemblyB Lock lever assemblyC Lock springD Cam pinE Pivot completeF Shackle pinG Lifting eye for TS, STS, MP modelH Lifting eye for TSU, TSEU modelI Linkage arr . TSMP, STSMP modelJ Link pin for MP modelL Cam for FHX modelM Cam pin for FHX modelN Cam for FHSX modelO Cam pin for FHSX model

For every vertical clamps are revision sets & repair sets available .

The repair sets contain:A: Cam assemblyC: Lock springD: Cam pinE: Pivot set

The revision sets contain:A: Cam assemblyB: Lock lever assemblyC: Lock springD: Cam pinE: Pivot complete

Repair set

Find us onterrier lifting Clamps BV

Ohmweg 114338 PV MiddelburgP .O . Box 8119 4330 EC MiddelburgThe Netherlands

Tel : +31 118 - 65 17 17 Fax : +31 118 - 65 17 18 Email : terrier@terrierclamps .com

WWW.terrierClamps.Com

2016 / 2017 EN

youtube/terrier lifting clamps

lifting clamps - interlift

Documents