lifecore implant

Lifecore RENOVA™

Internal Hex Implant SystemSurgical & Restorative Catalog

Table of Contents

For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300-2-

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

RENOVA Implant System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

RENOVA Drill Sequence Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

RENOVA Implants

RENOVA Tapered Implants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

RENOVA Straight Implants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Cover Screws & Healing Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cement-Retained Restorations

Cement-on-Crown (COC) Abutment System. . . . . . . . . . . . . . . . . . . . 11-13

Screw-Retained Restorations

UCLA Abutment System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16

Fixed Detachable Abutment System. . . . . . . . . . . . . . . . . . . . . . . . . . 17-19

Overdenture Restorations

Snap Abutment System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-22

Surgical Kit for RENOVA Tapered Implants . . . . . . . . . . . . . . . . . . . . . . . . . 23

Surgical Instrumentation for RENOVA Tapered Implants . . . . . . . . . . . . 24-25

Surgical Kit for RENOVA Straight Implants . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Surgical Instrumentation for RENOVA Straight Implants . . . . . . . . . . . . . 27-28

Additional Surgical Instrumentation for Tapered & Straight Implants . . . 29-31

Surgical Wrenches and Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33

Lab Tools and Other Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35

Lifecore LC5000 Surgical Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37

Tissue Regeneration Products

Capset® Calcium Sulfate Bone Graft Barrier. . . . . . . . . . . . . . . . . . . . . . . 38

TefGen® Regenerative Membranes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Introduction

For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -3-

Lifecore Biomedical is dedicated to the development of technologicallyadvanced, dependable products that offer long-term compatibility with thehuman body. Thousands of patients worldwide have benefited from Lifecore’stechnology in dentistry, general surgery and ophthalmology. Founded in 1965,Lifecore is a publicly held company (Nasdaq: LCBM) headquartered in Chaska,Minnesota, USA.

Lifecore’s Oral Restorative Division is focused on providing the highest quality surgical devices and applications for the global dental industry. The Divisionoffers one of the most extensive product lines to address the many clinical situations faced by our clients. Lifecore offers two-stage internal and external hex implant systems and a single stage implant system. A complete family ofrestorative options are available to meet the unique needs of each patient. Visitus at www.lifecore.com to learn more.

Our Commitment to Quality …Lifecore’s commitment to quality and service ensures that our products meet or exceed the highest standards set by the United States Food and DrugAdministration, the European Community and other international agencies.Lifecore has earned ISO 9001 and CE Certifications, international symbols ofquality system assurance and compliance.

Lifecore has earned a reputation for quality by enforcing strict design and inspection criteria. Our 100%inspection of all critical dimensions of dental implantsand prosthetic components has allowed Lifecore tomaintain the tightest tolerances in the industry. Inaddition, Lifecore’s Lifetime Limited Warranty givesthe clinician the added security of knowing that dentalimplants and prosthetics are covered throughout thepatient’s lifetime.

Our Commitment to Your Practice …Lifecore’s technical services department is available to consult with clients on questions related to case planning, component selection and step-by-step procedures for clinical and laboratory applications.

Our family of Support Plus® Restorative Training Programs are recognized in theindustry as the best referral based training courses available. Lifecore is certifiedthrough the Academy of General Dentistry, the American Dental Association andthrough the National Board of Certification to offer continuing education credits.

Lifecore is committed to being the standard of comparison for product quality, education and customer service, and to be recognized as a company of dedication, honesty and integrity.

A Leader in Biotechnology …

RENOVA Implant System


Internal hex prosthetic connection for superior esthetics and reliability

1mm machined titanium collar for soft tissue maintenance

Parallel walled neck region with circumferential grooves for crestal seal

and bone interlock

Lifecore’s proven RBM Surface

Straight and tapered designs expand treatment options

Tapered design enables placement nearimpinging anatomical structures while

maximizing prosthetic table diameter fornatural emergence profile

Apical end design provides excellent initial thread engagement and stability ST

RAIG

HT

TAPE

RED


Delivers superior strength and easeof prosthetic indexability.

Beveled interface helps maximizeprosthetic stability and evenly transfers occlusal forces to theimplant.

Deep internal hex connectionsimplifies abutment seating andprovides excellent tactile feel foradded confidence.

The Tapered and Straight implant designs share the same prosthetics.

The RENOVA system offers abutment systems for:• Cement-Retained restorations• Screw-Retained restorations• Overdenture restorations

Internal Hex Prosthetic Connection

RENOVA Prosthetics

Lifecore’s RENOVA, RESTORE® and STAGE-1™

implants feature the RBM surface. Lifecore’sRBM, a roughened titanium surface, hasbeen in clinical use since 1997 and hasachieved a high level of clinical acceptance.

Lifecore’s RBM (Resorbable Blast Media) substantially increases bone-to-implant contact and mechanical bone interlock, withapproximately 250% more surface roughness than a machined titanium surface. Safety and biological compatibilityare ensured through the exclusive use ofbiocompatible calcium phosphate ceramicmedia in the roughening process.

As a clinician, you can have confidence in the Lifecore implantyou choose knowing that Lifecore is an established leader in RBMsurface technology. Our three implant designs, coupled with ourRBM surface technology, maximize your opportunity for clinicalflexibility and optimal treatment outcomes.

Proven RBM Surface

2000X RBM Surface

500X RBM Surface

Mechanical interlock of bone into theimplant surface topography is evident. A direct bone-to-implant interface isobserved at 100x magnification.1

References:1. Sanz A, et al. Experimental study of boneresponse to a new surface treatment ofendosseous titanium implants. ImplantDentistry. 2001; 10:126-131.

Drill Sequence RENOVA Tapered Implants


1 2 3 4 5 62.3mm Round Bur 2.0mm Initial Drill 3.75mm Intermediate Drill 3.75mm Finishing Drill 3.75mm Tap 3.75 x 13mm Implant

1 2 3 4 5 62.3mm Round Bur 2.0mm Initial Drill 4.5mm Intermediate Drill 4.5mm Finishing Drill 4.5mm Tap 4.5 x 13mm Implant

SDI 3.75mm RENOVA Tapered Implant

RDI 4.5mm RENOVA Tapered Implant

Depth Marking System (for Tapered Implants)

13mm

InitialDrill

IntermediateDrill

FinishingDrill

Tap

NOTE: Drill stops and bands referencethe insertion depth for the correspondingimplant length.

0mm≤0.36mm


Drill Sequence RENOVA Straight Implants

Drill

Seq

uenc

e Ch

arts

1 2 3 4 5 7 82.3mm

Round Bur2.0mm

Initial Drill2.35mm

Depth Gauge2.8mm Drill 3.25mm Drill 3.75 x 13mm

Implant3.75mm Tap3.75mm

Countersink Drill

SDI 3.75mm RENOVA Straight Implant

962.35mm

Drill

RDI 4.75mm RENOVA Straight Implant

1 2 3 4 5 8 92.3mm

Round Bur2.0mm

Initial Drill2.35mm

Depth Gauge2.8mmDrill

3.25/4.25mmPilot Drill

4.25mm Drill

4.75mmTap

1072.35mm

Drill4.75 x 13mm

Implant

114.75mm

Countersink Drill

63.25mm

Drill

Depth Marking System (for Straight Implants)

16mm

13mm11.5mm

10mm8mm

0mm≤1.14mm

3.25x16mmDrill

3.25x11.5mmDrill

NOTE: Drill bands reference the insertion depthfor the corresponding implant length and do notindicate actual millimeter drill length.

Lifecore RENOVA Tapered Implants

Features:● Tapered implant design.● Lifecore RBM Surface.● Cover Screw and pre-mounted, color-coded Placement Head (3.5mm) included

with each implant.● Packaged to minimize handling during placement.● Gamma Sterilized.

Instrumentation Required:● RENOVA Tapered Implant Surgical Kit● .048" Hex Driver for Placement Head and Cover Screw


RENOVA Implants

Description Catalog No.

3.75 x 10mm 140003.75 x 11.5mm 140013.75 x 13mm 140023.75 x 14.5mm 14003

SDI 3.75mm RBM Tapered Implant


4.5 x 8.5mm 140044.5 x 10mm 140054.5 x 11.5mm 140064.5 x 13mm 14007

RDI 4.5mm RBM Tapered Implant

3.75mm

4.5mm

length

length

2.8mmApical

Diameter

3.0mmApical

Diameter

Impl

ants

& He

aling

Abu

tmen

ts


Lifecore RENOVA Straight Implants

Features:● Straight (parallel walled) implant design.● Lifecore RBM Surface.● Cover Screw and pre-mounted, color-coded Placement Head (3.5mm) included

with each implant.● Packaged to minimize handling during placement.● Gamma Sterilized.

Instrumentation Required:❍ RENOVA Straight Implant Surgical Kit❍ .048" Hex Driver for Placement Head and Cover Screw

SDI 3.75mm RBM Straight Implant

RDI 4.75mm RBM Straight Implant


3.75 x 8mm 130003.75 x 10mm 130013.75 x 11.5mm 130023.75 x 13mm 130033.75 x 16mm 13004


4.75 x 8mm 130054.75 x 10mm 130064.75 x 11.5mm 130074.75 x 13mm 130084.75 x 16mm 13009

3.75mm

length

4.75mm

length

Description Catalog No. Catalog No.

Cover Screw 10032 10033


Cover Screws

Features:● Included with all RENOVA implants.● Offered separately for spare or replacement use.

Instrumentation Required:❍ .048" Hex Driver

SDI 3.75mm RDI 4.5/4.75mm

Healing Abutments

Features:● Healing Abutments are designed to achieve optimal contouring of soft tissue,

which provides for more aesthetic restorations.● Occlusal surface is labeled with the implant prosthetic table (SDI and RDI)

and cuff height.


Cover Screws & Healing Abutments

Cuff Height Catalog No.

1.5mm 100353mm 100365mm 10037

SDI 3.75mm Healing Abutment

Cuff Height Catalog No.

1.5mm 100383mm 100395mm 10040

RDI 4.5/4.75mm Healing Abutment


Cement-On Crown (COC)Abutment System

Features:● Cement-on Crown (COC) Abutments are intended

for cement-retained restorations where conventional crown and bridge techniques are desired. The COC Abutment can be used for single or multi-unit (splinted) restorations.

● COC Abutments can be prepared as needed and impressioned directly using conventional crown and bridge techniques, eliminating the need for an impression post, analog and other prosthetic components. These abutments may also be used for provisional (temporary) restorations.

Technical Considerations:❍ A minimum inter-occlusal clearance of 4.0mm plus

the additional height of the restoration is required between the implant prosthetic table and the occlusal plane.

❍ It is recommended that bulk abutment reduction be performed outside of the mouth due to risk of heat transfer to the implant.

❍ COC Abutments are made of titanium and are not designed for direct casting to the abutment.


Torque Recommendation:❍ 30 Ncm for Abutment Screw

Cement-Retained RestorationsLa

bora

tory

Pros

thet

icSu

rger

y

.048” Hex Driver15° Angled

COC Abutment Straight LockingCOC Abutment

Straight LockingCOC Abutment

Straight ImplantTapered Implant

15° AngledCOC Abutment

ImplantAnalog

AbutmentImpressioned Directly

ImplantImpressioned Directly

ImplantImpression Post (Hexed)

Pros

thet

ics

Healing Abutment


Angled Locking Cement-On Crown (COC) Abutments● For use in single or multi-unit (splinted) restorations where angle

correction is needed.● Pre-machined margins simplify abutment preparation and may be

additionally prepared to follow gingival contours.● COC Abutment may be impressioned directly using conventional crown

and bridge impression techniques. Alternately, a locking implant impression post can be used to impression the implant; allowing the laboratory to prepare the abutment and fabricate the restoration.

● Abutments include .048” hex titanium abutment screw. Additional screws are available separately.

Straight Locking Cement-On Crown (COC) Abutments● For use in single or multi-unit (splinted) restorations.● Abutment margin can be prepared as necessary to follow gingival contours.● COC Abutment may be impressioned directly using conventional crown

and bridge impression techniques. Alternately, a locking implant impression post can be used to impression the Implant; allowing the laboratory to prepare the abutment and fabricate the restoration.

● Abutments include .048” hex titanium abutment screw. Additional screws are available separately.


15°, 2mm Cuff 43094 43096Abutment Screw, Ti 43100 43100

SDI 3.75mm


COC Abutmentwith Screw 43089 43090Abutment Screw, Ti 43092 43092

Cement-Retained Restorations

RDI 4.5/4.75mm



Implant Impression Posts (UCLA type)

SDI 3.75mm

● Used for single or multi-unit (splinted) restorations. ● Unique 3-piece design includes a long screw (open tray impressions) and

a short screw (closed tray impressions). ● Transfers soft-tissue contours to the dental laboratory.


ImplantImpression Post 43127 43128

RDI 4.5/4.75mm

Implant Analogs● Replicates the implant for use in the dental laboratory model.● Stainless steel design allows use during soldering procedures.


Implant Analog 43129 43130


Pros

thet

ics


UCLA Abutment SystemFeatures:● The UCLA Abutment System can be used for single or

multi-unit (splinted) crown and bridge restorations. It can also be used for bar attachment retained overdenture restorations.

● UCLA Abutments are used to fabricate highly aesthetic custom restorations that attach directly to the implant.

Technical Considerations:❍ A minimum inter-occlusal clearance of 4.0mm

for the SDI and RDI UCLA Abutments is required between the implant prosthetic table and the top of the abutment screw when seated.

Instrumentation Required:❍ .048” Hex Driver

Torque Recommendation:❍ 30 Ncm for Abutment Screws

Labo

rato

ryPr

osth

etic

Surg

ery

.048” Hex Driver


ImplantImpression Post


ImplantAnalog


Single Unit Restorations

Multi-Unit (Splinted)Restorations

UCLAGold/PlasticSleeve (Non-Locking)

UCLA Gold/PlasticSleeve (Locking)

UCLATemporary

Sleeve(Locking)

UCLATemporarySleeve(Non-Locking)

Healing Abutment


UCLA Gold/Plastic Combo Sleeve● The Gold/Plastic Combo combines the precision fit of a machined

interface with the convenience of a castable plastic chimney.● Specially designed geometry on the plastic chimney improves wax retention.● Offered in both locking and non-locking versions. ● Includes a titanium .048” hex abutment screw.


Locking 43006 43007Non-Locking 43009 43010

SDI 3.75mm

Abutment Screws forUCLA Abutments

● Titanium screw included with each abutment and offered separately.● .048” hex.● Torque recommendation – 30Ncm.


Abutment Screw, Ti 43116 43116

SDI 3.75mm

RDI 4.5/4.75mm

RDI 4.5/4.75mm

Pros

thet

ics





SDI 3.75mm


SDI 3.75mm

● Used for single or multi-unit (splinted) restorations. ● Unique 3-piece design includes a .048” hex long screw (open tray

impressions) and a short screw (closed tray impressions). ● Transfers soft-tissue contours to the dental laboratory.



RDI 4.5/4.75mm

UCLA Temporary Sleeve● Titanium Temporary Sleeves provide a textured surface for acrylic when

constructing provisional restorations.● Available in non-hexed for multi-unit (splinted) restorations and hexed for

single tooth restorations.● Includes a titanium .048" hex abutment screw.


Sleeve, Hexed 43110 43111Sleeve, Non-Hexed 43113 43114

*Call for availability

SDI 3.75mm*

RDI 4.5/4.75mm

RDI 4.5/4.75mm*


Pros

thet

ics

2-PieceImpression Post

.048" Hex Driver

Coping Screw(.048" Hex)

WaxingPin Fixed

DetachableGold Sleeve

FixedDetachablePlastic Sleeve

Fixed DetachableAbutment Analog

.062" HexDriver

HealingCap

Multi-Unit (Splinted)Restorations

Regular Diameter (RD)components shown

Components not shown to scale.

Fixed Detachable Abutment SystemFeatures:● The Fixed Detachable Abutment System is designed for

multi-unit (splinted) crown and bridge restorations. ● It is also commonly used for bar attachment retained

overdenture restorations. ● The Fixed Detachable Abutment provides excellent

stability and allows for easier path of insertion due to its tapered design.

Technical Considerations:

❍ A minimum inter-occlusal clearance of 6.9mm is required between the implant prosthetic table and the top of the coping screw when seated.

❍ The tapered 12° side wall allows up to 24° of divergence between adjacent abutments.

Instrumentation Required:❍ .062” Hex Driver

Labo

rato

ryPr

osth

etic

Surg

ery

.048" Hex Driver

AC HealingAbutment

1-PieceImpression

Post

FixedDetachable

Abutment




SDI 3.75mm RDI 4.5/4.75mmDescription Catalog No. Catalog No.

2mm Cuff, .062" Hex 43118 431204mm Cuff, .062" Hex 43119 43121

Fixed Detachable Abutments● Torque recommendation – 30Ncm.

Instrumentation required:● .062" Hex Driver.cuff

SDI 3.75mm RDI 4.5/4.75mmDescription Catalog No Catalog No.

Healing Cap, .048" Hex R2800-00 R2800-00

● Protects the abutment's internal threads and seating surfaceduring healing.

SDI 3.75mm RDI 4.5/4.75mmDescription Catalog No. Catalog No.

1-Piece, 9mm, .048" Hex R9615-48 R9615-482-Piece, 9mm, .048" Hex R9515-48 R9515-48

● 1-piece design is used for closed tray impressions. ● 2-piece design is used for open tray impressions.

Healing Cap for Fixed Detachable Abutments

Impression Posts for Fixed Detachable Abutments

Impression Post, 1-Piece

Impression Post, 2-Piece


Analog for Fixed Detachable Abutments● Replicates the Fixed Detachable Abutment for use by the

dental laboratory.● Stainless steel design allows use during laboratory

soldering procedures.


Fixed Detachable Analog 410530-4 410530-4

Pros

thet

ics

Gold Sleeve and Plastic Sleeve for Fixed Detachable Abutments● Gold Sleeve provides a precision machined interface

between the restoration and the abutment. A Waxing Pin is available for waxing additional vertical height.

● Plastic Sleeve provides an economical alternative to Gold Cylinders and the extended chimney eliminates the need for a Waxing Pin.

● Use with titanium coping screws, which arepurchased separately.



Gold Sleeve 410720-4 410720-4Plastic Sleeve, 12mm 410450-4L 410450-4LWaxing Pin R9229-48 R9229-48

SDI 3.75mm

Coping Screw for Fixed Detachable Abutments● Use with Fixed Detachable Abutment Gold and

Plastic Sleeves.● Torque recommendation - 20Ncm.


.048" Hex (1.5mm head) R9490-48 R9460-48


RDI 4.5/4.75mm

Gold Sleeve Plastic Sleeve


Snap Abutment SystemFeatures:● The Snap Abutment System is used with two or more implants for implant attachment retained

overdenture restorations. ● The Snap Abutment threads directly into the implant. ● The Snap Abutment assembly is processed into the denture base either chairside or at the dental laboratory. ● Replacement retention inserts are available in a choice of 8, 10 and 12 Newtons.

Technical Considerations:❍ A minimum inter-occlusal clearance of 7.0mm plus the cuff height is required.❍ Implants must be relatively parallel to one another – less than 20º total divergence.

Overdenture RestorationsLa

bora

tory

Pros

thet

icSu

rger

y

OverdentureAbutment Driver

OverdentureAbutment Driver

.048” Hex Driver

SnapAbutment

SnapAbutment


AbutmentAnalog

ImplantAnalog

Snap Abutment Assembly

AbutmentImpressioned Directly

ImplantImpressioned Directly


Snap Abutment Assembly

Healing Abutment

Instr

umen

tatio

n &

Mot

or


Snap Abutments

Snap Abutment Accessories

● Snap Abutments are packaged with a Snap Abutment Assembly [8 Newtons (N) – yellow] and laboratory spacer.

● Torque Recommendation – 30Ncm.

Instrumentation Required:❍ Overdenture Abutment Driver


1mm Cuff 43102 431062mm Cuff 43103 431073mm Cuff 43104 431084mm Cuff 43105 43109


Abutment Analog L2804-01Snap Retention Inserts, 8N, Qty 6 (includes blue retaining rings) L2806-08Snap Retention Inserts, 10N, Qty. 6 (includes blue retaining rings) L2806-10Snap Retention Inserts, 12N, Qty. 6 (includes blue retaining rings) L2806-12Snap Retention Inserts, Multi-Pack, Qty. 6 (includes blue retaining rings) L2806-13Assembly (8N) with lab spacer L2807-01Seating Tool L2808-01

8 N

RetainingRing

RetentionInsert

RetainingRing

RetentionInsert

RetainingRing

AbutmentAnalog

Snap Abutment

Snap AbutmentAssembly

SeatingTool

RetentionInsert

10 N

12 N

Snap AbutmentAssembly

SDI 3.75mm RDI 4.5/4.75mmcuff







SDI 3.75mm

● Used for single or multi-unit (splinted) restorations. ● Unique 3-piece design includes a .048" hex long screw (open tray

impressions) and a short screw (closed tray impressions). ● Transfers soft-tissue contours to the dental laboratory.



RDI 4.5/4.75mm


Surgical Kit Item List:

The RENOVA Tapered Implant Surgical Kit contains the instrumentation needed to placeRENOVA 3.75 and 4.5mm tapered implants.

2.3mm Round Marking Bur2.0mm Initial Drill3.75 x 10mm Intermediate Drill3.75 x 11.5mm Intermediate Drill3.75 x 13mm Intermediate Drill3.75 x 14.5mm Intermediate Drill3.75 x 10mm Finishing Drill3.75 x 11.5mm Finishing Drill3.75 x 13mm Finishing Drill3.75 x 14.5mm Finishing Drill4.5 x 8.5mm Intermediate Drill4.5 x 10mm Intermediate Drill4.5 x 11.5mm Intermediate Drill4.5 x 13mm Intermediate Drill4.5 x 8.5mm Finishing Drill4.5 x 10mm Finishing Drill4.5 x 11.5mm Finishing Drill4.5 x 13mm Finishing Drill3.75mm Countersink Drill, Tapered4.5mm Countersink Drill, Tapered3.75 x 10mm Surgical Tap

3.75 x 11.5mm Surgical Tap3.75 x 13mm Surgical Tap3.75 x 14.5mm Surgical Tap4.5 x 8.5mm Surgical Tap4.5 x 10mm Surgical Tap4.5 x 11.5mm Surgical Tap4.5 x 13mm Surgical TapSDI 3.5mm NP Placement HeadSDI 5.5mm NP Placement HeadRDI 3.5mm NP Placement HeadRDI 5.5mm NP Placement HeadSDI 15mm NP Placement Head*RDI 15mm NP Placement Head*Locking Drill ExtenderSurgical RatchetStabilizing WrenchHand AdapterRatchet Adapter, 8mmRatchet/Tap Adapter, 12mmHandpiece Adapter.048" Hex Swivel Head Driver, Short

.048" Hex Swivel Head Driver, Long

.048" Hex Driver, Latch-Type, ShortConversion Handle for

Latch-Type InstrumentsRatchet Extender, Short & LongPlacement Head Assembly Sleeves,

SDI & RDIComponent PackGrommet Plugs, 2 Packs of 10Cleaning Detergent

Surgical Kit for RENOVA Tapered Implants

Instr

umen

tatio

n &

Mot

or

* Call for availability


Surgical Kit for Tapered Implants 14012

Kit Features:● Simple step-by-step drill sequences.● RENOVA instrumentation offers improved efficiency,

longevity and overall ease of use. ● Includes drills and taps for use with external irrigation.


Surgical Instrumentation forRENOVA Tapered Implants

For recommended drill sequences and details on drill depth markings, refer to page 6.

Round Bur & Initial Drill● Round Bur is used for marking the implant site prior to beginning the

drilling sequence.● Initial Drill is the first drill used for all RENOVA Tapered Implants.

Drills for RENOVA Tapered● Specific drill is used for each implant size.● For use with external irrigation.


3.75 x 10mm 140723.75 x 11.5mm 140733.75 x 13mm 140743.75 x 14.5mm 14075

SDI 3.75mm Tapered Intermediate Drills


4.5 x 8.5mm 140804.5 x 10mm 140814.5 x 11.5mm 140824.5 x 13mm 14083

RDI 4.5mm Tapered Intermediate Drills


3.75 x 10mm 140763.75 x 11.5mm 140773.75 x 13mm 140783.75 x 14.5mm 14079

SDI 3.75mm Tapered Finishing Drills


4.5 x 8.5mm 140844.5 x 10mm 140854.5 x 11.5mm 140864.5 x 13mm 14087

RDI 4.5mm Tapered Finishing Drills


Round Marking Bur, 2.3mm L1405-23-002.0mm Initial Drill 14071

Round Bur

Initial Drill


Surgical Taps for RENOVA Tapered Implants

● For pre-tapping bone prior to tapered implant placement. ● Latch-type tap can be used in a handpiece or can be operated manually

when used with the Surgical Ratchet (L1702-01) and Ratchet/Tap Adapter (L1806-05).


3.75 x 10mm 140883.75 x 11.5mm 140893.75 x 13mm 140903.75 x 14.5mm 14091

SDI 3.75mm Tapered Surgical Tap


4.5 x 8.5mm 140924.5 x 10mm 140934.5 x 11.5mm 140944.5 x 13mm 14095

RDI 4.5mm Tapered Surgical Tap

Instr

umen

tatio

n &

Mot

or


Surgical Kit for RENOVA Straight Implants

Surgical Kit Includes:

Kit Features:● Simple step-by-step drill sequences.● RENOVA instrumentation offers improved efficiency,

longevity and overall ease of use. ● Includes drills and taps for use with external irrigation.

The RENOVA Straight (parallel walled) Implant Surgical Kitcontains the instrumentation needed to place RENOVA 3.75and 4.75mm straight implants.


Surgical Kit for Straight Implants 13010

2.3mm Round Marking Bur2.0mm Initial Drill2.35 x 11.5mm Drill2.35 x 16mm Drill2.8 x 11.5mm Drill2.8 x 16mm Drill3.25 x 11.5mm Drill3.25 x 16mm Drill3.25/4.25mm Pilot Drill4.25 x 11.5mm Drill4.25 x 16mm Drill3.75mm Countersink Drill4.75mm Countersink Drill3.75 x 11.5mm Surgical Tap3.75 x 16mm Surgical Tap4.75 x 11.5mm Surgical Tap4.75 x 16mm Surgical Tap

2.35mm Depth GaugeSDI 3.5mm NP Placement HeadSDI 5.5mm NP Placement HeadRDI 3.5mm NP Placement HeadRDI 5.5mm NP Placement HeadSDI 15mm NP Placement Head*RDI 15mm NP Placement Head*Locking Drill ExtenderSurgical RatchetStabilizing WrenchHand AdapterRatchet Adapter, 8mmRatchet/Tap Adapter, 12mmHandpiece Adapter.048" Hex Swivel Head Driver, Short.048" Hex Swivel Head Driver, Long.048" Hex Driver, Latch-Type, Short

Conversion Handle for Latch-TypeInstruments

Ratchet Extender, Short & LongPlacement Head Assembly Sleeves,

SDI & RDIComponent PackGrommet Plugs, 2 Packs of 10Cleaning Detergent



For recommended drill sequences and details on drill depth markings, refer to page 7.

Initial Drills

Pilot Drill

Intermediate & Finishing Drills

● Round Bur is used for marking the implant site prior to beginning the drilling sequence.

● Initial Drill is the first drill used for all RENOVA Straight Implants.


2.35 x 11.5mm Drill 130312.35 x 16mm Drill 13032


2.8 x 11.5mm Drill 130332.8 x 16mm Drill 130343.25 x 11.5mm Drill 130353.25 x 16mm Drill 130364.25 x 11.5mm Drill 130384.25 x 16mm Drill 13039


3.25/4.25 Pilot Drill 13037


Round Marking Bur, 2.3mm L1405-23-002.0mm Initial Drill 14071

Drills for RENOVA Straight Implants● For use with external irrigation.● Offered in 2 lengths.

Short – for RENOVA straight implants up to 11.5mmLong – for RENOVA straight implants up to 16mm

● Pilot Drill helps ensure a smooth and accurate transition between the 3.25mm and 4.25mm drills.

● For use with external irrigation.


3.75mm Countersink Drill 130404.75mm Countersink Drill 13041

● Contours ridge prior to placing 3.75mm and 4.75mm RENOVA Straight Implants, allowing implant and cover screw placement at or below the surrounding bone level.

● For use with external irrigation.

Countersink Drills

Surgical Instrumentation for RENOVA Straight Implants

Instr

umen

tatio

n &

Mot

or

Round Bur Initial Drill

Round Bur & Initial Drill


Surgical Taps for RENOVA Straight Implants


3.75 x 11.5mm Tap 130423.75 x 16mm Tap 13043

● For pre-tapping bone prior to implant placement. ● Latch-type tap can be used in a handpiece or can be operated manually

when used with the Surgical Ratchet (L1702-01) and Ratchet/Tap Adapter (L1806-05).

● For use with external irrigation.● Offered in 2 lengths.

Short – for RENOVA straight implants up to 11.5mmLong – for RENOVA straight implants up to 16mm

SDI 3.75 Straight Surgical Taps


4.75 x 11.5mm Tap 130444.75 x 16mm Tap 13045

RDI 4.75 Straight Surgical Taps

Surgical Instrumentation forRENOVA Straight Implants


Depth Gauge● Verifies depth of the surgical site.● Depth marks correspond to implants lengths.


2.35mm Depth Gauge (for straight implants) 10589

Parallel Pins● Used as a visual guide during surgery to help ensure parallel

implant placement.


2.0mm Parallel Pin (tapered & straight implants), 2-pk 10028*

2.35/2.8mm Parallel Pin (straight implants), 2-pk 13029*

Surgical Ratchet, Adapter and Extenders● Ratchet is used for manual operation of the Surgical

Taps and/or final tightening of the implant.● Ratchet Extenders enable clearance of adjacent teeth.

Description Catalog #

Surgical Ratchet L1702-01

Ratchet Adapter, 8mm L1806-04(for NP Placement Heads)

Ratchet/Tap Adapter, 12mm L1806-05(for NP Placement Heads &Latch-Type Surgical Taps)

Ratchet Extender, Short & Long L1703-01(to extend the RatchetAdapters)

Replacement O-Rings for L1806-03Ratchet Adapter, Qty. 4

Surgical Ratchet

Additional Surgical Instrumentation for Tapered and Straight Implants

Instr

umen

tatio

n &

Mot

or

Narrow Profile (NP)Placement Heads

● Narrow design improves intra-oral access during implant placement.● Color anodized for easy identification of implant/placement head junction.● External flats correspond to the flats of the implants internal hex for

easy indexing.



3.5mm Placement Head 10585 105875.5mm Placement Head 10586 1058815mm Placement Head 10579* 10580*


NP Ratchet Adapters


Ratchet Extenders


● Connects to the RENOVA NP Placement Head and carries the implant to the surgical site for hand delivered implant placement.

● Can also be used to remove the placement head by inserting a hex driver through the top end to loosen the screw and then carry the placement head assembly out of the mouth.

Hand Adapter forNarrow Profile (NP)Placement Head


Hand Adapter (for NP placement heads) L1406-02

● Inserts into the handpiece and connects to the RENOVA NP Placement Head for motor driven implant placement.

Handpiece Placement Adapter


Handpiece Adapter (for NP placement heads) L1406-01

● For use only with Narrow Profile (NP) Placement Heads.● Use open or closed end to stabilize the implant during loosening of the

placement head screw.● Features a special pin to engage the Ratchet Adapter (L1806-04) and

stabilize the implant during manual placement.

Stabilizing Wrench


Stabilizing Wrench L1709-01

● Connects directly to RENOVA Tapered and Straight Implant prosthetic connections for adjusting implant insertion depth during first stage surgery.

● Used in conjunction with the Surgical Ratchet.

Direct-to-Implant Ratchet Adapters


Adapter, short 10590 10592Adapter, long 10591 10593



Instr

umen

tatio

n &

Mot

or

● Titanium Forceps are used to handle implants and other titanium components to avoid possible contamination.

Titanium Forceps


Titanium Forceps R9119

● Adds 17mm of length to any latch-type drill or driver.● Useful when drilling next to adjacent teeth.

Locking Drill Extender


Locking Drill Extender L1404-01

● Use these transparent overlays with radiographs for pre-surgical assessment and implant selection.

● 100% (1:1) Sizing Overlay for use with peri-apical x-rays.● 125% Sizing Overlay for panoramic radiographs.

Implant Sizing Overlays


Tapered Implant 100% (1:1) Sizing Overlay 14050*Tapered Implant 125% Sizing Overlay 14051*Straight Implant 100% (1:1) Sizing Overlay 13027*Straight Implant 125% Sizing Overlay 13028*



Description Catalog No. Accu-Torque Wrench, 20Ncm ISS1101Accu-Torque Wrench, 30Ncm ISS1102

Conversion Handle for Accu-Torque Drivers, Swivel Head ISS1112Replacement O-Rings for Accu-Torque Drivers, Qty 6 ISS1111

Accu-Torque Wrenches & Accessories● Pre-calibrated wrenches precisely deliver proper torque.● Use with Accu-Torque Drivers.● Conversion Handle allows use of Accu-Torque Drivers as hand drivers.

Torque Wrench Care and Maintenance

Cleaning and Sterilization:● Before initial use and after each procedure, clean the torque wrench with a wet towel or disinfectant wipe.

Rinse under warm tap water and wipe dry. ● Before sterilization, spray an approved (handpiece type) instrument lubricant into the opening at the back of

the wrench.● Sterilize with the handle in the broken position.● Wrench may be sterilized by steam autoclave. Do not exceed 125°C (257°F).● Always use the dry cycle. ● Do not use “Flash Sterilization” techniques.● After sterilization, reset the torque break handle, then manually “break” the hinge again to ensure the wrench is

operating correctly.

Calibration:For proper function and accurate control, Accu-Torque Wrenches should be calibrated every 6 months (or after 100 autoclave cycles). For calibration or repair, wrenches should be sent directly to:

Micromotor Repair Station151 East Columbine AvenueSanta Ana, CA 92707 USA800-562-6204Outside the U.S.: 714-546-4045

* For Lifecore’s Torque Wrench warranty information, please reference the Ordering & Warranty Information section on page 37.

Conversion Handle forAccu-Torque Drivers

Wrenches and Drivers

30Ncm Torque Wrench

20Ncm Torque Wrench


Instr

umen

tatio

n &

Mot

or

Description Catalog No. .048" Hex Driver, Swivel Head, Short (8mm shaft/19mm total length) R9121.048" Hex Driver, Swivel Head, Long (13mm shaft/24mm total length) R9122

.048" Hex Driver, Latch-Type, Short (23mm total length) L1400-48-23

.048" Hex Driver, Latch-Type, Long (28mm total length) L1400-48-28

.048" Hex Driver, for Accu-Torque Wrench, Short (8mm shaft) ISS1104

.048" Hex Driver, for Accu-Torque Wrench, Long (15mm shaft) ISS1109

● Use with .048" hex placement head screws, healing abutments, abutment screws and impression posts.

● Tapered hex tip allows screws to be carried to the implant site.

● Used for Fixed Detachable Abutments. ● Tapered hex tip allows abutments to be carried to the implant site.

● Used for Snap Abutments.

Description Catalog No. Overdenture Driver, Swivel Head (8mm shaft) L2100-96-19

Overdenture Driver, Latch-Type (20mm total length) L1404-96-20

Overdenture Driver, for Accu-Torque Wrench* (8mm shaft) L2101-96-16

Description Catalog No. .062" Hex Driver, Swivel Head, Short (8mm shaft/19mm total length) L2100-62-19.062" Hex Driver, Swivel Head, Long (13mm shaft/24mm total length) L2100-62-24

.062" Hex Driver, Latch-Type, Short (23mm total length) L1400-62-19

.062" Hex Driver, Latch-Type, Long (28mm total length) L1400-62-23

.062" Hex Driver, for Accu-Torque Wrench, Short (8mm shaft) ISS1119

.062" Hex Driver, for Accu-Torque Wrench, Long (15mm shaft) ISS1120

.048" Hex Drivers

.062" Hex Drivers

Overdenture Abutment Drivers

Latch TypeDriver

Accu-TorqueDriver

SwivelHeadDriver

LatchType

Driver

Accu-TorqueDriver

SwivelHeadDriver

Latch-Type

Driver

HexDriver

Accu-TorqueDriver

Lab Tools & Other Products


● A simple, effective bar system, featuring a plastic bar pattern and nylon clips, which are processed into the removable prosthesis.

● Mechanical snap retention.

Hader Bar and Clip System

Description Catalog No. Hader Castable Bar And Clip System ISS185H

(includes 1 Hader Bar, 6Processing Clips, 6 Final Clips & 1 Hader Tool)

Hader Castable Bar ISS185B

Hader Processing Clips, Qty. 6 ISS185HP

Hader Final Clips, Qty. 6 ISS185HR

Hader Clip Metal Housings, Qty. 6 ISS526H

Hader Tool ISS185T

Hader Castable Bar

HaderProcessing Clip

HaderFinal Clip

Hader MetalHousing Clip

Hader Tool


Instr

umen

tatio

n &

Mot

or

Description Catalog No. Component Pack L1812-01

Component Pack ● Organizes small components such as the implant cover screws, placement heads, etc.

● Autoclavable design with slide lid interlocks into the base of the surgical kits.

● Optionally, may be used as a stand-alone organizer.

Instrument Cleaning Detergent• For use with all Lifecore instruments and surgical kits.• Includes recommended cleaning instructions.

Cleaning Detergent L1819-01


LC5000 Surgical Motor System

Lifecore LC5000 Surgical Motor System PackageDescription Catalog #LC5000 Surgical Motor and Console 1059420:1 Handpiece 1059510-pack of Sterile Irrigation Tubing 10598Testing Gauge for Latch-Type Instrument Shanks 10602PC Software Updating Kit 10611Service Oil, 50ml* 10604

LC5000 Features:Lifecore’s LC5000 is a simple, user-friendly motorwith abundant features forimplantology and oral and maxillofacial microsurgery.Carefully designed features,place the LC5000 in a classof its own. The uniquemotor with large on-screengraphics display, straight-forward console layout, footpedal control andProgram/Patient InformationSmart Cards exemplifieshigh performance.

Since the LC5000 is manufactured specifically for Lifecore Biomedical, it comes complete with Lifecore’ssurgical protocol preprogrammed and is backed by a full one-year warranty. In addition, the compact designhelps maximize surgical work area.

● Compact design helps maximize surgical work area

● Large, easy-to-read display clearly identifies motor settings including procedure, rpm, torque, irrigation flow rate, etc.

● Unique foot pedal design with large buttons simplifies access to functions during surgery. Also provides variable speed control.

● A versatile 20:1 handpiece can be used for drilling, tapping and implant placement (sold separately).

● Torque Bar display provides a visual reference of torque delivered during procedures.

● Program Data Smart Card instantly saves/retrieves up to 20 custom program settings.

● Patient Data Smart Card & PC Software stores patient information for documenting patient treatment data.

● Auto-Calibration function for motor/handpiece enables superior rpm and torque control.

● Full one-year warranty included. Extended warranty options also available. Contact Lifecore Client Service or yoursales representative for more details.


Instr

umen

tatio

n &

Mot

or

Lifecore LC5000 Surgical Motor Accessories Description Catalog #LC5000 Surgical Motor Unit 10594

20:1 Reduction Contra-Angle Handpiece - for implant surgery(up to 150,000 rpm when used with LC5000 Motor) 10595

1:1 High Speed Straight Handpiece (up to 30,000 rpm when used with LC5000 Motor) 10596

1:5 High Speed Straight Handpiece (up to 30,000 rpm when used with LC5000 Motor) 10597

Irrigation Tubing, Sterile, 10-pack 10598

Irrigation Needle, 2-pack 10599

Y-Connector, 2-pack 10600

Y-Tubing, 2-pack 10601

Testing Gauge (for latch-type instrument shanks) 10602

Travel Case (for LC5000 Motor System) 10603

Service Oil, 50ml* 10604

Service Oil, 250ml (6-pack)* 10613

Sterilization Protector for Motor 10607

Sterilization Case 10606

Patient Data Smart Card, 1-pack (for LC5000) 10608

Program Data Smart Card, 1-pack (for LC5000) 10609

System Software Card, 1-pack (for LC5000) 10610

PC Software Updating Kit 10611

USB Cable Adapter 10612

*Due to aerosol service oil can, special shipping and handling is required. Please contact Client Service for shipping rates.

Tissue Regeneration Products


CAPSET Features:• Bioresorbable• Conforms to Defect• Easy to Use• Positive Tissue Response• Offers Longer Working Time (SlowSet)• Ideal for Multiple Defects (SlowSet)

The 0.25gm reserve cup of calcium sulfate can act as a binder when mixed withBone Allograft, Autogenous Bone, Xenografts or Synthetic Bone grafting material.• Improves handling properties • Reduces particle migration

Description Catalog #CAPSET 1.0gm 4061-10CAPSET 2.0gm 4061-20CAPSET SlowSet 1.0gm 4064-10CAPSET SlowSet 2.0gm 4064-200.25gm Reserve Cup, 6-Pack 4061-025

CAPSET Calcium Sulfate Bone Graft BarrierCAPSET Calcium Sulfate Bone Graft Barrier is a barrier designed to be used over bonegrafting material to aid bone regeneration. Each CAPSET kit contains proprietary formulation calcium sulfate and an accelerating solution. When mixed together, they form a paste, which is molded into place over bone grafting material.

®


Description Catalog #TefGen-FD 25mm x 30mm TFS30TefGen-FD 25mm x 60mm TFR60TefGen-Plus 25mm x 30mm TPS30TefGen-Plus 25mm x 60mm TPR60TefGen-Plus 25mm x 30mm (Interproximal) TPH30TefGen-Plus 18mm x 25mm (U-shape) TPW25TefGen-Plus 10mm x 18mm (Poncho) TPP18

TefGen Regenerative MembranesTefGen Regenerative Membranes are the original non-resorbable, high density PTFEmembranes. They are designed for treatment of periodontal or osseous defectswhere the morphology of the defect creates a protected space, such as an extractionsite, or when bone grafting material is used to create a space underneath the material.

Actual Size

Actual Size

Actual Size

25mm

18m

m

30mm

25m

m

Actual Size

30mm

25m

m

TefGen-FDThe non-expanded structure prevents passage of cells

and bacteria, and allows the material to be easily removed (6,000x).

TefGen-PlusThe porous textured surface of the

membrane at 5,000x.

TPS30TFS30

TPH30

TPW25

TefGen Features: TefGen-FD® TefGen-Plus™

• Biocompatibility ✖ ✖• Ease of placement ✖ ✖• Ease of removal ✖ ✖• Resistant to bacterial colonization ✖ ✖• Increased elasticity ✖• Reduced elasticity ✖• Small pore size facilitates resistance to

bacterial migration through the membrane ✖ ✖• Increased surface area to allow

increased cellular contact ✖• Greater suture pull-out strength ✖

TefGen Membrane Characteristics: TefGen-FD TefGen-Plus• Elasticity Supple Stiffer• Suture pull-out strength Less Resistance Greater Resistance• Surface Smooth Textured• Pore size 0.5-1 microns 0.5-3 microns

25m

m

60mm

Actual Size

18mm

10m

m

TPR60TFR60

TPP18

Tissu

e Re

gene

ratio

nPr

oduc

ts


Warranty InformationOur Client Service Department is open Monday – Thursday 8:00 a.m. – 6:00 p.m., Friday 8:00 a.m. – 5:00 p.m. (central stan-dard time) for Ordering, Technical Support or additional information. Orders may be placed via the internet, phone, fax or mail.Orders placed before 2:00 p.m. will ship the same business day.

www.lifecore.com

Phone: In the United States 800-752-2663 Fax: In the United States 800-651-8521Outside the United States +952-368-4300 Outside the United States +952-368-4324

Mail: Lifecore Biomedical, Inc.Client Service Department3515 Lyman BoulevardChaska, MN 55318-3051 U.S.A.

Non-cash payment may be sent with the order.

Pricing: Prices are subject to change without notice.

Payment Terms and Options: Prepayment for first-time orders may be required. For your convenience, we accept VISA, MasterCard, American Express, Discover and DinersClub. Please remit invoice payments by check to: Lifecore Biomedical, M & I 97, P.O. Box 1150-97, Minneapolis, MN 55480-1150, U.S.A. A $20.00 fee will be applied to your account for anyreturned checks. Lifecore also accepts payments by bank wire transfer. Please contact Lifecore’s Client Service Department for wire transfer instructions.

Shipping Information: Orders shipped within the continental U.S. are normally sent by second day delivery, unless otherwise specified. Please be sure to include a street address.Shipments sent outside the continental U.S. are sent by air courier.

Rush Orders: Overnight delivery services, within the U.S., are available at additional cost. Please contact Lifecore’s Client Service Department for assistance. Additional freight optionsinclude UPS Ground, Second Day Air, Next Day P.M. or Next Day A.M.

Lifetime Warranty: Lifecore offers a Lifetime Warranty on implants and restorative components. For an informational brochure, please contact Lifecore’s Client Service Department.

Medical Device Reporting: If you experience a problem with Lifecore’s product that you believe falls within the scope of the Medical Device Reporting regulations, please contact your local distributor or Lifecore’s Client Service Department immediately for shipping instructions. Product exposed to blood or bodily fluids must be properly labeled for safe handlingby Lifecore personnel.

General Limited Warranty: Lifecore warrants that its products will be free from defects in material and/or workmanship and shall be of merchantable quality. This warrantyapplies only to the original purchaser. In the event of a defect, please notify Lifecore’s Client Service Department of the defect prior to returning product. Lifecore will, at its option, either repair,replace or issue credit for such defects. Lifecore also offers a Lifetime Warranty on implants and restorative components. Lifecore makes no other warranties, express or implied, except as setforth above.

Limitations: Purchaser assumes all risks and liability resulting from the use of these products, whether used separately or in combination with other products not of Lifecore’s manufacture.Lifecore strongly recommends completion of postgraduate dental implant education and strict adherence to the procedures outlined on the instructions for use when they accompany our product.

Lifecore continually strives to improve its products and therefore reserves the right to improve, modify or discontinue products at any time, or to change specifications without notice and without incurring obligations.

Return/Exchange Policy: To return an item, contact your local distributor or call Lifecore’s Client Service Department for an Authorized Returned Goods (ARG) number. No product returns will be accepted without an ARG number. Product returned must be unopened and undamaged, and must be received within 30 days of the invoice date for full refund or credit. Product received within 31-90 days of the invoice date is subject to a 15% restocking fee. No returns over 90 days from invoice date. Product may be exchanged for other Lifecore product of equal or lesser value for 180 days. Individual product packages from Surgical Kits, Quick-Packs or other items sold as sets will not be accepted for return. Cash refunds cannot beissued for returns purchased by credit card. Credit for such returns will be applied to the purchaser’s credit card account.

Driver and Surgical Instrument Warranty: Lifecore recommends that drivers and other instruments be replaced when worn, corroded, dull or otherwise compromised.Lifecore warrants its drivers and other surgical instruments to be free from defects in material and workmanship for six months. If the warrantied driver or instrument fails within the first sixmonths, the purchaser is to notify Lifecore’s Client Service Department prior to returning the product. Lifecore will, at is option, either repair, replace or issue credit for the defective item.Accidental misuse, inappropriate installations or failure to follow manufacturer’s directions voids the warranty. This warranty does not include Surgical Drills and Torque Wrenches as they arecovered under separate warranties.

Surgical Drill Warranty: Lifecore’s Surgical Manual recommends drills be replaced when worn, corroded, dull, or otherwise compromised. Drills should be replaced after 20 to 50uses (depending on bone density), or every six months, whichever comes first. In the event of alleged defect under warranty, the purchaser is to notify Lifecore’s Client Service Departmentpromptly. Client Service will provide instructions for return of the product. Accidental misuse, inappropriate installations or failure to follow manufacturer’s directions voids the warranty.Lifecore warrants the drills against defects in material or workmanship for a period of 90 days from the date of the original invoice. Lifecore’s sole obligation under product warranty is, at its dis-cretion, to replace or repair defective components in part or whole. Drills in use for less than 20 uses and/or six months will be prorated for a replacement discount.

Torque Wrench Warranty: Lifecore warrants the wrench for 90 days to be free of defects in the materials and workmanship. Lifecore’s sole obligation under product warranty is,at its discretion, to repair or replace any defective component or product in part or whole. Accidental misuse, inappropriate installations or failure to follow manufacturer’s care and mainte-nance instructions voids the warranty. In the event of alleged defect under warranty, the purchaser is to notify Lifecore’s Client Service Department promptly. Client Service will provide instruc-tions for return of the product. No product will be accepted at Lifecore without an Authorized Returned Goods number. International clients should contact their local Lifecore representative for warranty claims.

Handpiece Warranty: Lifecore warrants handpieces for one year to be free of defects in the materials and workmanship. Lifecore’s sole obligation under product warranty is, at itsdiscretion, to repair or replace any defective component or product in part or whole. Accidental misuse, inappropriate installations, use of inappropriate lubrication, or failure to follow manufacturer’s care and maintenance instructions voids the warranty. In the event of alleged defect under warranty, the purchaser is to notify Lifecore’s Client Service Department promptly.Client Service will provide instructions for return of the product. No product will be accepted at Lifecore without an Authorized Returned Goods number.

LC5000 Surgical Motor Warranty: Contact Lifecore Client Service for complete details.

When ordering from outside the United States, please contact your local Lifecore Biomedical distributor, or call Lifecoreand ask for an International Client Service Representative.


MF N30 Before 2 p.m. FS N15

C.O.D. $ After 2 p.m. AP Other

DATEP.O.#

SHIP TO: BILL TO:Name NameAddress AddressCity State Zip City State ZipPhone # Phone #Specialty Credit Card (type)

Card # Exp.Credit Card Billing AddressCity State Zip

❏ Ground ❏ 2nd Day Desired Delivery Date ❏ Next Day ❏ Next Day a.m. Comments❏ COD

O R D E R F O R MTo order by phone call, 800-752-2663 Monday - Thursday between 8 a.m. to 6 p.m., Fridays, 8 a.m. to 5p.m. (Outside the U.S. call 952-368-4300) To order by FAX, call 800-651-8521. (Outside the U.S. call 952-368-4324.) Orders received before 2 p.m. will be shipped the same business day (U.S. only).

Catalog # Qty Description Tax Price Discount Ext. Price

For Office Use

Order # ___________________________________Account # ___________________________________

3515 Lyman Boulevard, Chaska, MN 55318-3051 U.S.A.Phone: 800-752-2663 or 952-368-4300Fax: 800-651-8521 or 952-368-4324

Ord

erin

gIn

form

atio

n

Ord

erin

g In

form

atio

nan

d In

dex


INDEX

AAbutments

Cement-On Crown 12Fixed Detachable 18Snap 21

Abutment ScrewsCement-On Crown 12UCLA 15

Accu-Torque Wrenches 32Analogs

Cement-On Crown 13Fixed Detachable 19Snap 22UCLA 16

CCAPSET Calcium Sulfate Bone Graft Barrier 38Cement-On Crown (COC) Abutment System 11-13Cement Retained Restorations 11-13Component Pack 35Coping Screw, Fixed Detachable 19Countersink Drills- RENOVA Straight Implants 27Cover Screws 10

DDepth Gauge 29Drill Sequence Charts 6-7Drills

RENOVA Straight Implants 27RENOVA Tapered Implants 24

Drivers.048" Hex 33.062” Hex 33Overdenture 33

FFinishing Drills


Fixed Detachable Abutment System 17-19Forceps, Titanium 31

GGold Sleeve, Fixed Detachable 19Gold/Plastic Combo Sleeves, UCLA 15

HHader Bar & Clip System 34Hand Adapter for Placement Head 30Handpiece Placement Adapter 30Healing Abutments 10Healing Cap, Fixed Detachable 18

IImplant Analogs 13, 16, 22Implant Impression Posts

Fixed Detachable 18UCLA Type 13, 16, 22

Implant Sizing Overlays 31Implants

RENOVA Straight 9RENOVA Tapered 8

Impression Posts 13, 16, 18, 22Initial Drills


Instrument Cleaning Detergent 35Intermediate Drills


LLC5000 Surgical Motor 36-37Locking Drill Extender 31

MLC5000 Surgical Motor 36-37

NNarrow Profile (NP) Placement Heads 29

OOrder Form 41Overdenture Restorations 20-21

PParallel Pins 29Pilot Drill – RENOVA Straight Implants 27Placement Heads, Narrow Profile (NP) 29Plastic Sleeves

Fixed Detachable 19UCLA 15Gold/Plastic Combo Sleeve, UCLA 15

RRatchet Adapter 29Ratchet Adapter, Direct-to-Implant 30Ratchet Extender 29Ratchet/Tap Adapter 29Retention Inserts, Snap Abutment 21Round Bur 24, 27


SScrew-Retained Restorations 14-19Seating Tool, Snap Abutment 21Sizing Overlays 31Snap Abutment System 20-22Stabilizing Wrench 30Surgical Kits


Surgical Motor 36-37Surgical Ratchet 29Surgical Taps


TTaps, Surgical


TefGen Regenerative Membranes 39Temporary Sleeve, UCLA 16Tissue Regeneration

CAPSET Calcium Sulfate Bone Graft Barrier 38TefGen Regenerative Membranes 39

Titanium Forceps 31

UUCLA Abutment System 14-16

WWarranty Information 40Waxing Pin, Fixed Detachable 19Wrenches, Accu-Torque 32

Subsidiary:Lifecore Biomedical, AB Särö, Sweden Call: +46-31-93-68-23 Fax:+46-31-93-68-45

Manufacturer:Lifecore Biomedical, Inc.3515 Lyman Blvd.Chaska, MN 55318 USACall: 800-752-2663Fax: 800-651-8521

Outside the USACall: +952-368-4300Fax: +952-368-4324

© Lifecore Biomedical, Inc. 2003 5/04 4410-0119Email: [email protected] www.lifecore.com

Authorized Representative: Lifecore Biomedical, SpAvia A. Fleming, 19 37135 Verona, Italy Call: +39-045-8230294 Fax: +39-045-8250296

Subsidiary:Lifecore Biomedical, GmbHAlfter, GermanyCall: +49-2222-9294-0Fax: +49-2222-977356

Trademark AcknowledgmentsLifecore, Lifecore Biomedical, CAPSET, TefGen and Support Plus are registered trademarks of Lifecore Biomedical, Inc.

lifecore implant

Education

renova straight implants

tapered straight implants

easelifecores renova

lifecore tomaintain

renova implant systeminternal

lifecore lc5000 surgical

surgical kit

prosthetic stability