lever mount 4pp india
TRANSCRIPT
8/2/2019 Lever Mount 4pp INDIA
http://slidepdf.com/reader/full/lever-mount-4pp-india 1/4
LeverMount ®
Unique, patented and cost effective
solution for process weighing applications
capacities 10kg to 5000kg
Purpose designed stainless load cell
and mount arrangement
High stability three point mounting
Easily confgurable or radial or
tangential mounting
Allows or vessel expansion
and contraction
LeverMount® can be raised and lowered
under load without jacking
Straightorward, low cost installation
without specialist tooling
Substantial lit o prevention
Tolerant o steel work misalignment
Load cell removal without jacking or
dummies
Stainless steel OIML C3 approved load cell,
ully welded, sealed to IP68
LeverMount® is the latest development in load cell weighing assemblies rom Thames Side Sensors.Process weighing installations are made easier, saer and more cost eective using this simple,innovative design.
Load cells approved to 3000 divisions OIML R60 Class C.
Available with ATEX certication or hazardous area applications. For applications in aggressiveenvironments where stress corrosion or acid attack is an issue, a special parylene coating can be
specied as an option. High temperature variants are also available.
8/2/2019 Lever Mount 4pp INDIA
http://slidepdf.com/reader/full/lever-mount-4pp-india 2/4
The concept o a purpose designed loading assembly
using single ended shear beam load cells or vessel
weighing was rst introduced in the early 1980’s.
LeverMount® is the latest generation o load cell
weighing assemblies rom Thames Side Sensors,
specically designed to oer a completely resh
approach to process weighing solutions.
Utilising the established range o Thames Side shear
beam and bending beam load cells, the patented
LeverMount® retains all o the advantages o
previous mount designs, whilst providing improved
mechanical stability beore, during and ater
installation.
The top plate o the LeverMount® can be raised
and lowered under load without specialist tools. Additionally, the load cell can be removed or replaced
without the need or external jacks or dummy
load cells. Two types o load cell interace can be
specied; a load button and saddle arrangement
with expansion/contraction adjustment or static
applications such as hoppers and tanks and a
ball and cup, sel centering, option or dynamic
applications such as foor scales.
UNIQUE & SIMPLE
Many other designs o mounting assembly provide athreaded jacking eature which allows a vessel to besupported by the mount prior to the installation o the
load cells, however under most load conditions, anexternal jack is needed to raise and lower the vessel,and threads can become clogged with dirt or powder,rendering the integral jacking mechanism unusable, evenunder low loads.
LeverMount’s® unique patented design is such that noseparate support arrangements are necessary to raiseand lower the vessel. The base casting itsel providesa stable load-bearing platorm prior to installation othe load cell. Once the vessel is in position and the twotransit bolts are removed, the load cell is used as alever to raise the top plate o the mount into the workingposition, regardless o whether the vessel is empty or ull.
LeverMount ® - Innovation from Thames Side India
Removal o a load cell at any time is accomplished byreversing the procedure, and requires no jacks, dummyload cells or specialist tools. Installation, operationand maintenance o the vessel weighing system is
consequently made saer, easier, switer and less costlyLoad cells or use in the LeverMount® can be speciedwith ATEX EEx ia IIC T6 certication or both dust andgas in all zones as well as certication which allowsZone 20, 21 and 22 use without saety barriers. Hightemperature versions are also available or operation upto 150˚C utilising special high temperature componentsand PTFE Tefon cable.
LeverMount® is just one product in an extensiverange o innovative Thames Side load cell and mountarrangements, with capacities rom 10kg up to 600tonnes, designed specically or process weighing andmaterials storage applications.
8/2/2019 Lever Mount 4pp INDIA
http://slidepdf.com/reader/full/lever-mount-4pp-india 3/4
FEATURES
• Purpose designed cast steel mount and
stainless steel load cell
• Simple two part casting using the transit bolts with
captivated nuts or load cell xing
• Stainless steel, IP68, fully welded, single ended
shear beam load cell
• Load cell acts as the lever to raise and lower the top
plate and vessel
• Vessel can be raised and lowered under load
• No jacking screws or support pillars
• Three point support and xing
• Top plate movement in the lateral and rotational axis
• Congurable for radial, tangential or offset mounting
• Substantial anti-lift facility, over 50% of maximum rated load
• Minimal difference between the working height and
the installed height
• Load cell can be easily removed under load in situ
• Three physical sizes cover the range from 10kg to 5000kg
BENEFITS
• Ideal or process weighing applications that require
an accurate, sae and cost eective solution
• Aesthetically pleasing design, eliminating the need foradditional machining and special bolts
• Suitable for use in the harshest of industrial environments
• No need for alternative lifting devices such as pad
jacks
• Easier, quicker and safer than alternative mount
arrangements
• No stripped threads or top plate interference
• Eliminates rocking and twisting in the mount,always nds a plane
• Tolerant of steel work misalignment avoiding any mechanically induced errors
• Easy alignment to the radial axis of the vessel to compensateor expansion and contraction.
• Increased safety
• Reduces the need to adjust for pipe work withoutfexible connections
• Less down time
• Covers the majority of process weighing
applications
Self Centering
Interface
8/2/2019 Lever Mount 4pp INDIA
http://slidepdf.com/reader/full/lever-mount-4pp-india 4/4
LeverMount Lite
Load Cell Specication
3000 divisions (C3)
OIML R60 Class C
10, 20, 50,100, 150, 200
2+/- 0.1%
<±0.017
<±0.015
<±0.016
<±0.002
<±0.0012
-10 to +40
-20 to +70
150
300
<±1
400±20
350±3
>5000
10
15
4
IP68
Units
kg
mV/V
%*
%*
%*
%*/˚C
%*/˚C
˚C
˚C
%*
%*%*
ohms
ohms
Mohms @ 100V.dc
V
V
m
Shipping Weights: (kg)10, 20, 50, 100, 150, 200 = 1.2kg
300, 500, 1000, 2000 = 4 kg
3000, 5000 = 9 kg.
Construction
Mount manuactured rom cast
316 stainless steel.
Load cell manuactured rom
high strength 17-4PH stainless
steel, electro-polished, ully
welded and sealed to IP68.
LeverMount
Load Cell Specication
3000 divisions (C3)
OIML R60 Class C
300, 500, 1000, 2000, 3000 & 5000
2±0.15%
<±0.017
<±0.015
<±0.016
<±0.002
<±0.0012
-10 to +40
-20 to +70
150
300
<±2
400±20
350±3
>5000
10
15
5
IP68
Load Cell Approval
Load Ranges
Rated Output
Combined Error
Non-repeatability
Creep (30 minutes)
Temp Eect on Zero Balance
Temp Eect on Span
Compensated Temp Range
Operating Temp Range
Sae Overload
Ultimate Overload
Zero Balance
Input Resistance
Output Resistance
Insulation Resistance
Recommended Supply Voltage
Maximum Supply Voltage
Cable Length
Protection Class
*With respect to rated output
LeverMount ® - Innovation from Thames Side-Sensors Ltd
Distributed by
UK Patent No. 2 339 026US Patent No. 6 320 142
India Patent No. 231090
Our policy is one o continuous productenhancement. We thereore reserve the rightto incorporate technical modications withoutprior notication.LeverMount® is a registered trade mark oThames Side Sensors Limited.
LeverMount® Issue IN07/2011
164
+ ve input RED
+ ve output GREEN
- ve input BLUE
- ve output YELLOW
Electrical Connections
*Via 4 core, 7/0.2mm (0.22mm²),
screened polyurethane cable.
Screen is not connected electrically
to the load cell.
Thames Side Sensors India Private Ltd
A/35,
New Empire Industrial Estate,
Kondivita Lane,
J. B. Nagar, Andheri (East),
Mumbai 400 059
India
tel: +91 22 2831 00 54
e-mail: [email protected]
web: www.thames-side.in
A subsidiary of Thames Side Sensors Ltd, UK